From: fbrehm Date: Sun, 19 Feb 2012 17:21:03 +0000 (+0100) Subject: committing changes in /etc after emerge run X-Git-Url: https://git.uhu-banane.de/?a=commitdiff_plain;h=c101a118d2b9587cfbf28b1eea302cf03fd7d641;p=config%2Fsamara%2Fetc.git committing changes in /etc after emerge run Package changes: +www-client/lynx-2.8.7_p1 --- diff --git a/.etckeeper b/.etckeeper index e3015cc..b2d1a66 100755 --- a/.etckeeper +++ b/.etckeeper @@ -828,6 +828,8 @@ maybe chmod 0600 './lvm/backup/vg0' maybe chmod 0600 './lvm/backup/vg00' maybe chmod 0600 './lvm/backup/vg1' maybe chmod 0644 './lvm/lvm.conf' +maybe chmod 0644 './lynx.cfg' +maybe chmod 0644 './lynx.lss' maybe chmod 0644 './machine-id' maybe chmod 0755 './mail' maybe chmod 0644 './mail/aliases' diff --git a/lynx.cfg b/lynx.cfg new file mode 100644 index 0000000..be9fc53 --- /dev/null +++ b/lynx.cfg @@ -0,0 +1,3589 @@ +# $LynxId: lynx.cfg,v 1.180 2009/06/07 17:02:21 tom Exp $ +# lynx.cfg file. +# The default placement for this file is /usr/local/lib/lynx.cfg (Unix) +# or Lynx_Dir:lynx.cfg (VMS) +# +# $Format: "#PRCS LYNX_VERSION \"$ProjectVersion$\""$ +#PRCS LYNX_VERSION "2.8.7rel.1" +# +# $Format: "#PRCS LYNX_DATE \"$ProjectDate$\""$ +#PRCS LYNX_DATE "Sun, 05 Jul 2009 16:52:33 -0700" +# +# Definition pairs are of the form VARIABLE:DEFINITION +# NO spaces are allowed between the pair items. +# +# If you do not have write access to /usr/local/lib you may change +# the default location of this file in the userdefs.h file and recompile, +# or specify its location on the command line with the "-cfg" +# command line option. +# +# Items may be commented out by putting a '#' as the FIRST char of the line +# (Any line beginning with punctuation is ignored). Leading blanks on each +# line are ignored; trailing blanks may be significant depending on the option. + +# An HTML'ized description of all settings (based on comments in this file, +# with alphabetical table of settings and with table of settings by category) +# is available at http://lynx.isc.org/release/lynx2-8-5/lynx_help/cattoc.html +# +### The conversion is done via the scripts/cfg2html.pl script. +### Several directives beginning with '.' are used for this purpose. + + +.h1 Auxiliary Facilities +# These settings control the auxiliary navigating facilities of lynx, e.g., +# jumpfiles, bookmarks, default URLs. + + +.h2 INCLUDE +# Starting with Lynx 2.8.1, the lynx.cfg file has a crude "include" +# facility. This means that you can take advantage of the global lynx.cfg +# while also supplying your own tweaks. +# +# You can use a command-line argument (-cfg /where/is/lynx.cfg) or an +# environment variable (LYNX_CFG=/where/is/lynx.cfg). +# For instance, put in your .profile or .login: +# +# LYNX_CFG=~/lynx.cfg; export LYNX_CFG # in .profile for sh/ksh/bash/etc. +# setenv LYNX_CFG ~/lynx.cfg # in .login for [t]csh +# +# Then in ~/lynx.cfg: +# +# INCLUDE:/usr/local/lib/lynx.cfg +# ^^^^^^^^^^^^^^^^^^^^^^^ or whatever is appropriate on your system +# and now your own tweaks. +# +# Starting with Lynx 2.8.2, the INCLUDE facility is yet more powerful. You can +# suppress all but specific settings that will be read from included files. +# This allows sysadmins to provide users the ability to customize lynx with +# options that normally do not affect security, such as COLOR, VIEWER, KEYMAP. +# +# The syntax is +# +# INCLUDE:filename for +# +# sample: +.ex +#INCLUDE:~/lynx.cfg for COLOR VIEWER KEYMAP +# only one space character should surround the word 'for'. On Unix systems ':' +# is also accepted as separator. In that case, the example can be written as +.ex +#INCLUDE:~/lynx.cfg:COLOR VIEWER KEYMAP +# In the example, only the settings COLOR, VIEWER and KEYMAP are accepted by +# lynx. Other settings are ignored. Note: INCLUDE is also treated as a +# setting, so to allow an included file to include other files, put INCLUDE in +# the list of allowed settings. +# +# If you allow an included file to include other files, and if a list of +# allowed settings is specified for that file with the INCLUDE command, nested +# files are only allowed to include the list of settings that is the set AND of +# settings allowed for the included file and settings allowed by nested INCLUDE +# commands. In short, there is no security hole introduced by including a +# user-defined configuration file if the original list of allowed settings is +# secure. + + +.h2 STARTFILE +# STARTFILE is the default starting URL if none is specified +# on the command line or via a WWW_HOME environment variable; +# Lynx will refuse to start without a starting URL of some kind. +# STARTFILE can be remote, e.g. http://www.w3.org/default.html , +# or local, e.g. file://localhost/PATH_TO/FILENAME , +# where PATH_TO is replaced with the complete path to FILENAME +# using Unix shell syntax and including the device on VMS. +# +# Normally we expect you will connect to a remote site, e.g., the Lynx starting +# site: +STARTFILE:http://lynx.isc.org/ +# +# As an alternative, you may want to use a local URL. A good choice for this is +# the user's home directory: +.ex +#STARTFILE:file://localhost/~/ +# +# Your choice of STARTFILE should reflect your site's needs, and be a URL that +# you can connect to reliably. Otherwise users will become confused and think +# that they cannot run Lynx. + + +.h2 HELPFILE +# HELPFILE must be defined as a URL and must have a +# complete path if local: +# file://localhost/PATH_TO/lynx_help/lynx_help_main.html +# Replace PATH_TO with the path to the lynx_help subdirectory +# for this distribution (use SHELL syntax including the device +# on VMS systems). +# The default HELPFILE is: +# http://lynx.isc.org/release/lynx2-8-6/lynx_help/lynx_help_main.html +# This should be changed to the local path. +# This definition will be overridden if the "LYNX_HELPFILE" environment +# variable has been set. +# +HELPFILE:file://localhost/usr/share/doc/lynx-2.8.7_p1/lynx_help/lynx_help_main.html +.ex +#HELPFILE:file://localhost/PATH_TO/lynx_help/lynx_help_main.html + + +.h2 DEFAULT_INDEX_FILE +# DEFAULT_INDEX_FILE is the default file retrieved when the +# user presses the 'I' key when viewing any document. +# An index to your CWIS can be placed here or a document containing +# pointers to lots of interesting places on the web. +# +#DEFAULT_INDEX_FILE:http://www.ncsa.uiuc.edu/SDG/Software/Mosaic/MetaIndex.html +DEFAULT_INDEX_FILE:http://lynx.isc.org/ + + +.h1 Interaction + +.h2 GOTOBUFFER +# Set GOTOBUFFER to TRUE if you want to have the previous goto URL, +# if any, offered for reuse or editing when using the 'g'oto command. +# The default is defined in userdefs.h. If left FALSE, the circular +# buffer of previously entered goto URLs can still be invoked via the +# Up-Arrow or Down-Arrow keys after entering the 'g'oto command. +# +#GOTOBUFFER:FALSE + + +.h2 JUMP_PROMPT +# JUMP_PROMPT is the default statusline prompt for selecting a jumps file +# shortcut. (see below). +# You can change the prompt here from that defined in userdefs.h. Any +# trailing white space will be trimmed, and a single space is added by Lynx +# following the last non-white character. You must set the default prompt +# before setting the default jumps file (below). If a default jumps file +# was set via userdefs.h, and you change the prompt here, you must set the +# default jumps file again (below) for the change to be implemented. +# +#JUMP_PROMPT:Jump to (use '?' for list): + + +.h1 Auxiliary Facilities + +.h2 JUMPFILE +# JUMPFILE is the local file checked for short-cut names for URLs +# when the user presses the 'j' (JUMP) key. The user will be prompted +# to enter a short-cut name for an URL, which Lynx will then follow +# in a similar manner to 'g'oto; alternatively, s/he can enter '?' +# to view the full JUMPFILE list of short-cuts with associated URLs. +# There is an example jumps file in the samples subdirectory. +# If not defined here or in userdefs.h, the JUMP command will invoke +# the NO_JUMPFILE statusline message (see LYMessages_en.h ). +# +# To allow '?' to work, include in the JUMPFILE +# a short-cut to the JUMPFILE itself, e.g. +#
?
This Shortcut List +# +# On VMS, use Unix SHELL syntax (including a lead slash) to define it. +# +# Alternate jumps files can be defined and mapped to keys here. If the +# keys have already been mapped, then those mappings will be replaced, +# but you should leave at least one key mapped to the default jumps +# file. You optionally may include a statusline prompt string for the +# mapping. You must map upper and lowercase keys separately (beware of +# mappings to keys which the user can further remap via the 'o'ptions +# menu). The format is: +# +# JUMPFILE:path:key[:prompt] +# +# where path should begin with a '/' (i.e., not include file://localhost). +# Any white space following a prompt string will be trimmed, and a single +# space will be added by Lynx. +# +# In the following line, include the actual full local path to JUMPFILE, +# but do not include 'file://localhost' in the line. +#JUMPFILE:/FULL_LOCAL_PATH/jumps.html +.ex +#JUMPFILE:/Lynx_Dir/ips.html:i:IP or Interest group (? for list): + + +.h2 JUMPBUFFER +# Set JUMPBUFFER to TRUE if you want to have the previous jump target, +# if any, offered for reuse or editing when using the 'J'ump command. +# The default is defined in userdefs.h. If left FALSE, the circular +# buffer of previously entered targets (shortcuts) can still be invoked +# via the Up-Arrow or Down-Arrow keys after entering the 'J'ump command. +# If multiple jumps files are installed, the recalls of shortcuts will +# be specific to each file. If Lynx was built with PERMIT_GOTO_FROM_JUMP +# defined, any random URLs used instead of shortcuts will be stored in the +# goto URL buffer, not in the shortcuts buffer(s), and the single character +# ':' can be used as a target to invoke the goto URL buffer (as if 'g'oto +# followed by Up-Arrow had been entered). +# +#JUMPBUFFER:FALSE + + +.h1 Internal Behavior + +.h2 SAVE_SPACE +# If SAVE_SPACE is defined, it will be used as a path prefix for the +# suggested filename in "Save to Disk" operations from the 'p'rint or +# 'd'ownload menus. On VMS, you can use either VMS (e.g., "SYS$LOGIN:") +# or Unix syntax (including '~' for the HOME directory). On Unix, you +# must use Unix syntax. If the symbol is not defined, or is zero-length +# (""), no prefix will be used, and only a filename for saving in the +# current default directory will be suggested. +# This definition will be overridden if a "LYNX_SAVE_SPACE" environment +# variable has been set on Unix, or logical has been defined on VMS. +# +#SAVE_SPACE:~/foo/ + + +.h2 REUSE_TEMPFILES +# Lynx uses temporary files for (among other purposes) the content of +# various user interface pages. REUSE_TEMPFILES changes the behavior +# for some of these temp files, among them pages shown for HISTORY, +# VLINKS, OPTIONS, INFO, PRINT, DOWNLOAD commands. +# If set to TRUE, the same file can be used multiple times for the same +# purpose. If set to FALSE, a new filename is generated each time before +# rewriting such a page. With TRUE, repeated invocation of these commands +# is less likely to push previous documents out of the cache of rendered +# texts (see also DEFAULT_CACHE_SIZE). This is especially useful with +# intermittent (dialup) network connections, when it is desirable to +# continue browsing through the cached documents after disconnecting. +# With the default setting of FALSE, there can be more than one incarnation +# of e.g. the VLINKS page cached in memory (but still only the most recently +# generated one is kept as a file), resulting in sometimes less surprising +# behaviour when returning to such a page via HISTORY or PREV_DOC functions +# (most users will not encounter and notice this difference). +# +#REUSE_TEMPFILES:FALSE + + +.h2 LYNX_HOST_NAME +# If LYNX_HOST_NAME is defined here or in userdefs.h, it will be +# treated as an alias for the local host name in checks for URLs on +# the local host (e.g., when the -localhost switch is set), and this +# host name, "localhost", and HTHostName (the fully qualified domain +# name of the system on which Lynx is running) will all be passed as +# local. A different definition here will override that in userdefs.h. +# +#LYNX_HOST_NAME:www.cc.ukans.edu + + +.h2 LOCALHOST_ALIAS +# localhost aliases +# Any LOCALHOST_ALIAS definitions also will be accepted as local when +# the -localhost switch is set. These need not actually be local, i.e., +# in contrast to LYNX_HOST_NAME, you can define them to trusted hosts at +# other Internet sites. +# +.ex 2 +#LOCALHOST_ALIAS:gopher.server.domain +#LOCALHOST_ALIAS:news.server.domain + + +.h2 LOCAL_DOMAIN +# LOCAL_DOMAIN is used for a tail match with the ut_host element of +# the utmp or utmpx structure on systems with utmp capabilities, to +# determine if a user is local to your campus or organization when +# handling -restrictions=inside_foo or outside_foo settings for ftp, +# news, telnet/tn3270 and rlogin URLs. An "inside" user is assumed +# if your system does not have utmp capabilities. CHANGE THIS here +# if it was not changed in userdefs.h at compilation time. +# +#LOCAL_DOMAIN:ukans.edu + + +.h1 Session support + +.h2 AUTO_SESSION +# If AUTO_SESSION is TRUE lynx will save/restore useful information about +# your browsing history when closing/starting current lynx session if +# no command-line session switches override this setting. +# This setting is useful only if SESSION_FILE is defined here or in the user's +# .lynxrc file. +# +#AUTO_SESSION:FALSE + +.h2 SESSION_FILE +# SESSION_FILE defines the file name where lynx will store user sessions. +# This setting is used only when AUTO_SESSION is true. +# Note: the default setting will store/resume each session in a different +# folder under same file name (if that is allowed by operating system) +# when lynx is invoked from different directories. +# (The current working directory may be changed inside lynx) +# +# If you want to use the same session file wherever you invoke Lynx, +# enter the full path below, eg '/home//.lynx_session'. +# +# If you do not want this feature, leave the setting commented. +# Users can still customize SESSION_FILE and AUTO_SESSION via +# their .lynxrc file. +# +#SESSION_FILE:lynx_session + +.h2 SESSION_LIMIT +# SESSION_LIMIT defines maximum number of: searched strings, goto URLs, +# visited links and history entries which will be saved in session file. The +# minimum allowed is 1, the maximum is 10000. +# +# For instance, if SESSION_LIMIT is 250, a per-session limit of 250 entries of +# searched strings, goto URLs, visited links and history entries will be saved +# in the session file. +# +# There is no fixed limit on the number of entries which can be restored; +# It is limited only by available memory. +# +#SESSION_LIMIT:250 + + +.h1 Character sets + +.h2 CHARACTER_SET +# CHARACTER_SET defines the display character set, i.e., assumed to be +# installed on the user's terminal. It determines which characters or strings +# will be used to represent 8-bit character entities within HTML. New +# character sets may be defined as explained in the README files of the +# src/chrtrans directory in the Lynx source code distribution. For Asian (CJK) +# character sets, it also determines how Kanji code will be handled. The +# default is defined in userdefs.h and can be changed here or via the +# 'o'ptions menu. The 'o'ptions menu setting will be stored in the user's RC +# file whenever those settings are saved, and thereafter will be used as the +# default. For Lynx a "character set" has two names: a MIME name (for +# recognizing properly labeled charset parameters in HTTP headers etc.), and a +# human-readable string for the 'O'ptions Menu (so you may find info about +# language or group of languages besides MIME name). Not all 'human-readable' +# names correspond to exactly one valid MIME charset (example is "Chinese"); +# in that case an appropriate valid (and more specific) MIME name should be +# used where required. Well-known synonyms are also processed in the code. +# +# Raw (CJK) mode +# +# Lynx normally translates characters from a document's charset to display +# charset, using ASSUME_CHARSET value (see below) if the document's charset +# is not specified explicitly. Raw (CJK) mode is OFF for this case. +# When the document charset is specified explicitly, that charset +# overrides any assumption like ASSUME_CHARSET or raw (CJK) mode. +# +# For the Asian (CJK) display character sets, the corresponding charset is +# assumed in documents, i.e., raw (CJK) mode is ON by default. In raw CJK +# mode, 8-bit characters are not reverse translated in relation to the entity +# conversion arrays, i.e., they are assumed to be appropriate for the display +# character set. The mode should be toggled OFF when an Asian (CJK) display +# character set is selected but the document is not CJK and its charset not +# specified explicitly. +# +# Raw (CJK) mode may be toggled by user via '@' (LYK_RAW_TOGGLE) key, +# the -raw command line switch or from the 'o'ptions menu. +# +# Raw (CJK) mode effectively changes the charset assumption about unlabeled +# documents. You can toggle raw mode ON if you believe the document has a +# charset which does correspond to your Display Character Set. On the other +# hand, if you set ASSUME_CHARSET the same as Display Character Set you get raw +# mode ON by default (but you get assume_charset=iso-8859-1 if you try raw mode +# OFF after it). +# +# Note that "raw" does not mean that every byte will be passed to the screen. +# HTML character entities may get expanded and translated, inappropriate +# control characters filtered out, etc. There is a "Transparent" pseudo +# character set for more "rawness". +# +# Since Lynx now supports a wide range of platforms it may be useful to note +# the cpXXX codepages used by IBM PC compatible computers, and windows-xxxx +# used by native MS-Windows apps. We also note that cpXXX pages rarely are +# found on Internet, but are mostly for local needs on DOS. +# +# Recognized character sets include: +# +.nf +# string for 'O'ptions Menu MIME name +# =========================== ========= +# 7 bit approximations (US-ASCII) us-ascii +# Western (ISO-8859-1) iso-8859-1 +# Western (ISO-8859-15) iso-8859-15 +# Western (cp850) cp850 +# Western (windows-1252) windows-1252 +# IBM PC US codepage (cp437) cp437 +# DEC Multinational dec-mcs +# Macintosh (8 bit) macintosh +# NeXT character set next +# HP Roman8 hp-roman8 +# Chinese euc-cn +# Japanese (EUC-JP) euc-jp +# Japanese (Shift_JIS) shift_jis +# Korean euc-kr +# Taipei (Big5) big5 +# Vietnamese (VISCII) viscii +# Eastern European (ISO-8859-2) iso-8859-2 +# Eastern European (cp852) cp852 +# Eastern European (windows-1250) windows-1250 +# Latin 3 (ISO-8859-3) iso-8859-3 +# Latin 4 (ISO-8859-4) iso-8859-4 +# Baltic Rim (ISO-8859-13) iso-8859-13 +# Baltic Rim (cp775) cp775 +# Baltic Rim (windows-1257) windows-1257 +# Celtic (ISO-8859-14) iso-8859-14 +# Cyrillic (ISO-8859-5) iso-8859-5 +# Cyrillic (cp866) cp866 +# Cyrillic (windows-1251) windows-1251 +# Cyrillic (KOI8-R) koi8-r +# Arabic (ISO-8859-6) iso-8859-6 +# Arabic (cp864) cp864 +# Arabic (windows-1256) windows-1256 +# Greek (ISO-8859-7) iso-8859-7 +# Greek (cp737) cp737 +# Greek2 (cp869) cp869 +# Greek (windows-1253) windows-1253 +# Hebrew (ISO-8859-8) iso-8859-8 +# Hebrew (cp862) cp862 +# Hebrew (windows-1255) windows-1255 +# Turkish (ISO-8859-9) iso-8859-9 +# North European (ISO-8859-10) iso-8859-10 +# Ukrainian Cyrillic (cp866u) cp866u +# Ukrainian Cyrillic (KOI8-U) koi8-u +# UNICODE (UTF-8) utf-8 +# RFC 1345 w/o Intro mnemonic+ascii+0 +# RFC 1345 Mnemonic mnemonic +# Transparent x-transparent +.fi +# +# The value should be the MIME name of a character set recognized by +# Lynx (case insensitive). +# Find RFC 1345 at http://www.ics.uci.edu/pub/ietf/uri/rfc1345.txt . +# +CHARACTER_SET:utf-8 + +.h2 LOCALE_CHARSET +# LOCALE_CHARSET overrides CHARACTER_SET if true, using the current locale to +# lookup a MIME name that corresponds, and use that as the display charset. +# +# Note that while nl_langinfo(CODESET) itself is standardized, the return +# values and their relationship to the locale value is not. GNU libiconv +# happens to give useful values, but other implementations are not guaranteed +# to do this. +#LOCALE_CHARSET:FALSE + + +.h2 ASSUME_CHARSET +# ASSUME_CHARSET changes the handling of documents which do not +# explicitly specify a charset. Normally Lynx assumes that 8-bit +# characters in those documents are encoded according to iso-8859-1 +# (the official default for the HTTP protocol). When ASSUME_CHARSET +# is defined here or by an -assume_charset command line flag is in effect, +# Lynx will treat documents as if they were encoded accordingly. +# See above on how this interacts with "raw mode" and the Display +# Character Set. +# ASSUME_CHARSET can also be changed via the 'o'ptions menu but will +# not be saved as permanent value in user's .lynxrc file to avoid more chaos. +# +#ASSUME_CHARSET:iso-8859-1 + + +.h2 ASSUMED_DOC_CHARSET_CHOICE +.h2 DISPLAY_CHARSET_CHOICE +# It is possible to reduce the number of charset choices in the 'O'ptions menu +# for "display charset" and "assumed document charset" fields via +# DISPLAY_CHARSET_CHOICE and ASSUMED_DOC_CHARSET_CHOICE settings correspondingly. +# Each of these settings can be used several times to define the set of possible +# choices for corresponding field. The syntax for the values is +# +# string | prefix* | * +# +# where +# +# 'string' is either the MIME name of charset or it's full name (listed +# either in the left or in the right column of table of +# recognized charsets), case-insensitive - e.g. 'Koi8-R' or +# 'Cyrillic (KOI8-R)' (both without quotes), +# +# 'prefix' is any string, and such value will select all charsets having +# the name with prefix matching given (case insensitive), i.e., +# for the charsets listed in the table of recognized charsets, +# +.ex +# ASSUMED_DOC_CHARSET_CHOICE:cyrillic* +# will be equal to specifying +.ex 4 +# ASSUMED_DOC_CHARSET_CHOICE:cp866 +# ASSUMED_DOC_CHARSET_CHOICE:windows-1251 +# ASSUMED_DOC_CHARSET_CHOICE:koi8-r +# ASSUMED_DOC_CHARSET_CHOICE:iso-8859-5 +# or lines with full names of charsets. +# +# literal string '*' (without quotes) will enable all charset choices +# in corresponding field. This is useful for overriding site +# defaults in private pieces of lynx.cfg included via INCLUDE +# directive. +# +# Default values for both settings are '*', but any occurrence of settings +# with values that denote any charsets will make only listed choices available +# for corresponding field. +#ASSUMED_DOC_CHARSET_CHOICE:* +#DISPLAY_CHARSET_CHOICE:* + + +.h2 ASSUME_LOCAL_CHARSET +# ASSUME_LOCAL_CHARSET is like ASSUME_CHARSET but only applies to local +# files. If no setting is given here or by an -assume_local_charset +# command line option, the value for ASSUME_CHARSET or -assume_charset +# is used. It works for both text/plain and text/html files. +# This option will ignore "raw mode" toggling when local files are viewed +# (it is "stronger" than "assume_charset" or the effective change +# of the charset assumption caused by changing "raw mode"), +# so only use when necessary. +# +#ASSUME_LOCAL_CHARSET:iso-8859-1 + + +.h2 PREPEND_CHARSET_TO_SOURCE +# PREPEND_CHARSET_TO_SOURCE:TRUE tells Lynx to prepend a META CHARSET line +# to text/html source files when they are retrieved for 'd'ownloading +# or passed to 'p'rint functions, so HTTP headers will not be lost. +# This is necessary for resolving charset for local html files, +# while the assume_local_charset is just an assumption. +# For the 'd'ownload option, a META CHARSET will be added only if the HTTP +# charset is present. The compilation default is TRUE. +# It is generally desirable to have charset information for every local +# html file, but META CHARSET string potentially could cause +# compatibility problems with other browsers, see also PREPEND_BASE_TO_SOURCE. +# Note that the prepending is not done for -source dumps. +# +#PREPEND_CHARSET_TO_SOURCE:TRUE + + +.h2 NCR_IN_BOOKMARKS +# NCR_IN_BOOKMARKS:TRUE allows you to save 8-bit characters in bookmark titles +# in the unicode format (NCR). This may be useful if you need to switch +# display charsets frequently. This is the case when you use Lynx on different +# platforms, e.g., on UNIX and from a remote PC, and want to keep the bookmarks +# file persistent. +# Another aspect is compatibility: NCR is part of I18N and HTML4.0 +# specifications supported starting with Lynx 2.7.2, Netscape 4.0 and MSIE 4.0. +# Older browser versions will fail so keep NCR_IN_BOOKMARKS:FALSE if you +# plan to use them. +# +#NCR_IN_BOOKMARKS:FALSE + + +.h2 FORCE_8BIT_TOUPPER +# FORCE_8BIT_TOUPPER overrides locale settings and uses internal 8-bit +# case-conversion mechanism for case-insensitive searches in non-ASCII display +# character sets. It is FALSE by default and should not be changed unless +# you encounter problems with case-insensitive searches. +# +#FORCE_8BIT_TOUPPER:FALSE + + +.h2 OUTGOING_MAIL_CHARSET +# While Lynx supports different platforms and display character sets +# we need to limit the charset in outgoing mail to reduce +# trouble for remote recipients who may not recognize our charset. +# You may try US-ASCII as the safest value (7 bit), any other MIME name, +# or leave this field blank (default) to use the display character set. +# Charset translations currently are implemented for mail "subjects= " only. +# +#OUTGOING_MAIL_CHARSET: + + +.h2 ASSUME_UNREC_CHARSET +# If Lynx encounters a charset parameter it doesn't recognize, it will +# replace the value given by ASSUME_UNREC_CHARSET (or a corresponding +# -assume_unrec_charset command line option) for it. This can be used +# to deal with charsets unknown to Lynx, if they are "sufficiently +# similar" to one that Lynx does know about, by forcing the same +# treatment. There is no default, and you probably should leave this +# undefined unless necessary. +# +#ASSUME_UNREC_CHARSET:iso-8859-1 + +.h2 PREFERRED_LANGUAGE +# PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en", +# "fr") which will be indicated by Lynx in its Accept-Language headers +# as the preferred language. If available, the document will be +# transmitted in that language. Users can override this setting via +# the 'o'ptions menu and save that preference in their RC file. +# This may be a comma-separated list of languages in decreasing preference. +# +#PREFERRED_LANGUAGE:en + + +.h2 PREFERRED_CHARSET +# PREFERRED_CHARSET specifies the character set in MIME notation (e.g., +# "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in +# requests to http servers using an Accept-Charsets header. Users can +# change it via the 'o'ptions menu and save that preference in their RC file. +# The value should NOT include "ISO-8859-1" or "US-ASCII", +# since those values are always assumed by default. +# If a file in that character set is available, the server will send it. +# If no Accept-Charset header is present, the default is that any +# character set is acceptable. If an Accept-Charset header is present, +# and if the server cannot send a response which is acceptable +# according to the Accept-Charset header, then the server SHOULD send +# an error response with the 406 (not acceptable) status code, though +# the sending of an unacceptable response is also allowed. See RFC 2068 +# (http://www.ics.uci.edu/pub/ietf/uri/rfc2068.txt). +# +#PREFERRED_CHARSET: + + +.h2 CHARSETS_DIRECTORY +# CHARSETS_DIRECTORY specifies the directory with the fonts (glyph data) +# used by Lynx to switch the display-font to a font best suited for the +# given document. The font should be in a format understood by the +# platforms TTY-display-font-switching API. Currently supported on OS/2 only. +# +# Lynx expects the glyphs for the charset CHARSET with character cell +# size HHHxWWW to be stored in a file HHHxWWW/CHARSET.fnt inside the directory +# specified by CHARSETS_DIRECTORY. E.g., the font for koi8-r sized 14x9 +# should be in the file 14x9/koi8-r.fnt. +# +#CHARSETS_DIRECTORY: + + +.h2 CHARSET_SWITCH_RULES +# CHARSET_SWITCH_RULES hints lynx on how to choose the best display font given +# the document encoding. This string is a sequence of chunks, each chunk +# having the following form: +# +# IN_CHARSET1 IN_CHARSET2 ... IN_CHARSET5 :OUT_CHARSET +# +# For readability, one may insert arbitrary additional punctuation (anything +# but : is ignored). E.g., if lynx is able to switch only to display charsets +# cp866, cp850, cp852, and cp862, then the following setting may be useful +# (split for readability): +# +# CHARSET_SWITCH_RULES: koi8-r ISO-8859-5 windows-1251 cp866u KOI8-U :cp866, +# iso-8859-1 windows-1252 ISO-8859-15 :cp850, +# ISO-8859-2 windows-1250 :cp852, +# ISO-8859-8 windows-1255 :cp862 +# +#CHARSET_SWITCH_RULES: + + +.h1 Interaction + +.h2 URL_DOMAIN_PREFIXES +.h2 URL_DOMAIN_SUFFIXES +# URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be +# prepended (together with a scheme://) and appended to the first element +# of command line or 'g'oto arguments which are not complete URLs and +# cannot be opened as a local file (file://localhost/string). Both +# can be comma-separated lists. Each prefix must end with a dot, each +# suffix must begin with a dot, and either may contain other dots (e.g., +# .com.jp). The default lists are defined in userdefs.h and can be +# replaced here. Each prefix will be used with each suffix, in order, +# until a valid Internet host is created, based on a successful DNS +# lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu +# etc.). The first element can include a :port and/or /path which will +# be restored with the expanded host (e.g., wfbr:8002/dir/lynx will +# become http://www.wfbr.edu:8002/dir/lynx). The prefixes will not be +# used if the first element ends in a dot (or has a dot before the +# :port or /path), and similarly the suffixes will not be used if the +# the first element begins with a dot (e.g., .nyu.edu will become +# http://www.nyu.edu without testing www.nyu.com). Lynx will try to +# guess the scheme based on the first field of the expanded host name, +# and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr. +# will be made gopher://gopher.wfbr.edu). +# +#URL_DOMAIN_PREFIXES:www. +#URL_DOMAIN_SUFFIXES:.com,.edu,.net,.org + + +.h2 FORMS_OPTIONS +# Toggle whether the Options Menu is key-based or form-based; +# the key-based version is available only if specified at compile time. +#FORMS_OPTIONS:TRUE + + +.h2 PARTIAL +# Display partial pages while downloading +#PARTIAL:TRUE + + +.h2 PARTIAL_THRES +# Set the threshold # of lines Lynx must render before it +# redraws the screen in PARTIAL mode. Anything < 0 implies +# use of the screen size. +#PARTIAL_THRES:-1 + + +.h2 SHOW_KB_RATE +# While getting large files, Lynx shows the approximate rate of transfer. +# Set this to change the units shown. "Kilobytes" denotes 1024 bytes: +# NONE to disable the display of transfer rate altogether. +# TRUE or KB for Kilobytes/second. +# FALSE or BYTES for bytes/second. +# KB,ETA to show Kilobytes/second with estimated completion time. +# BYTES,ETA to show BYTES/second with estimated completion time. +# Note that the "ETA" values are available if USE_READPROGRESS was defined. +#SHOW_KB_RATE:TRUE + +.h2 SHOW_KB_NAME +# Set the abbreviation for Kilobytes (1024). +# Quoting from +# http://www.romulus2.com/articles/guides/misc/bitsbytes.shtml +# In December 1998, the International Electrotechnical Commission (IEC) +# approved a new IEC International Standard. Instead of using the metric +# prefixes for multiples in binary code, the new IEC standard invented specific +# prefixes for binary multiples made up of only the first two letters of the +# metric prefixes and adding the first two letters of the word "binary". Thus, +# for instance, instead of Kilobyte (KB) or Gigabyte (GB), the new terms would +# be kibibyte (KiB) or gibibyte (GiB). +# +# If you prefer using the conventional (and more common) "KB", modify this +# setting. +#SHOW_KB_NAME:KiB + +.h1 Timeouts + +.h2 INFOSECS +.h2 MESSAGESECS +.h2 ALERTSECS +.h2 NO_PAUSE +# The following definitions set the number of seconds for +# pauses following statusline messages that would otherwise be +# replaced immediately, and are more important than the unpaused +# progress messages. Those set by INFOSECS are also basically +# progress messages (e.g., that a prompted input has been canceled) +# and should have the shortest pause. Those set by MESSAGESECS are +# informational (e.g., that a function is disabled) and should have +# a pause of intermediate duration. Those set by ALERTSECS typically +# report a serious problem and should be paused long enough to read +# whenever they appear (typically unexpectedly). The default values +# are defined in userdefs.h, and can be modified here should longer +# pauses be desired for braille-based access to Lynx. +# +# SVr4-curses implementations support time delays in milliseconds, +# hence the value may be given shorter, e.g., 0.5 +# +# Use the NO_PAUSE option (like the command-line -nopause) to override +# all of the delay times. +# +#INFOSECS:1 +#MESSAGESECS:2 +#ALERTSECS:3 +#NO_PAUSE:FALSE + +.h2 DEBUGSECS +# Set DEBUGSECS to a nonzero value to slow down progress messages +# (see "-delay" option). +#DEBUGSECS:0 + +.h2 REPLAYSECS +# Set REPLAYSECS to a nonzero value to allow for slow replaying of +# command scripts (see "-cmd_script" option). +#REPLAYSECS:0 + +.h1 Appearance +# These settings control the appearance of Lynx's screen and the way +# Lynx renders some tags. + +.h2 USE_SELECT_POPUPS +# If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list of +# radio buttons for the OPTIONs in SELECT blocks which lack the MULTIPLE +# attribute, instead of using a popup menu. Note that if the MULTIPLE +# attribute is present in the SELECT start tag, Lynx always will create a +# vertical list of checkboxes for the OPTIONs. +# The default defined here or in userdefs.h can be changed via the 'o'ptions +# menu and saved in the RC file, and always can be toggled via the -popup +# command line switch. +# +#USE_SELECT_POPUPS:TRUE + + +.h2 SHOW_CURSOR +# SHOW_CURSOR controls whether or not the cursor is hidden or appears +# over the current link in documents or the current option in popups. +# Showing the cursor is handy if you are a sighted user with a poor +# terminal that can't do bold and reverse video at the same time or +# at all. It also can be useful to blind users, as an alternative +# or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or +# LINKS_ARE_NUMBERED. +# The default defined here or in userdefs.h can be changed via the +# 'o'ptions menu and saved in the RC file, and always can be toggled +# via the -show_cursor command line switch. +# +#SHOW_CURSOR:FALSE + +.h2 UNDERLINE_LINKS +# UNDERLINE_LINKS controls whether links are underlined by default, or shown +# in bold. Normally this default is set from the configure script. +# +#UNDERLINE_LINKS:FALSE + +.h2 BOLD_HEADERS +# If BOLD_HEADERS is set to TRUE the HT_BOLD default style will be acted +# upon for

through

headers. The compilation default is FALSE +# (only the indentation styles are acted upon, but see BOLD_H1, below). +# On Unix, compilation with -DUNDERLINE_LINKS also will apply to the +# HT_BOLD style for headers when BOLD_HEADERS is TRUE. +# +#BOLD_HEADERS:FALSE + + +.h2 BOLD_H1 +# If BOLD_H1 is set to TRUE the HT_BOLD default style will be acted +# upon for

headers even if BOLD_HEADERS is FALSE. The compilation +# default is FALSE. On Unix, compilation with -DUNDERLINE_LINKS also +# will apply to the HT_BOLD style for headers when BOLD_H1 is TRUE. +# +#BOLD_H1:FALSE + + +.h2 BOLD_NAME_ANCHORS +# If BOLD_NAME_ANCHORS is set to TRUE the content of anchors without +# an HREF attribute, (i.e., anchors with a NAME or ID attribute) will +# have the HT_BOLD default style. The compilation default is FALSE. +# On Unix, compilation with -DUNDERLINE_LINKS also will apply to the +# HT_BOLD style for NAME (ID) anchors when BOLD_NAME_ANCHORS is TRUE. +# +#BOLD_NAME_ANCHORS:FALSE + + +.h1 Internal Behavior + +.h2 DEFAULT_CACHE_SIZE +.h2 DEFAULT_VIRTUAL_MEMORY_SIZE +# The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be +# cached in memory at one time. +# +# This so-called cache size (actually, number) is defined in userdefs.h and +# may be modified here and/or with the command line argument -cache=NUMBER +# The minimum allowed value is 2, for the current document and at least one +# to fetch, and there is no absolute maximum number of cached documents. +# On Unix, and VMS not compiled with VAXC, whenever the number is exceeded +# the least recently displayed document will be removed from memory. +# +# On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the +# amount (bytes) of virtual memory that can be allocated and not yet be freed +# before previous documents are removed from memory. If the values for both +# the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then +# the least recently displayed documents will be freed until one or the other +# value is no longer exceeded. The default value is defined in userdefs.h. +# +# The Unix and VMS (but not VAXC) implementations use the C library malloc's +# and calloc's for memory allocation, but procedures for taking the actual +# amount of cache into account still need to be developed. They use only +# the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum +# number of documents to cache (rather than the maximum number only if +# DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX). +# +#DEFAULT_CACHE_SIZE:10 +#DEFAULT_VIRTUAL_MEMORY_SIZE:512000 + + +.h2 SOURCE_CACHE +# SOURCE_CACHE sets the source caching behavior for Lynx: +# FILE causes Lynx to keep a temporary file for each cached document +# containing the HTML source of the document, which it uses to regenerate +# the document when certain settings are changed (for instance, +# historical vs. minimal vs. valid comment parsing) instead of reloading +# the source from the network. +# MEMORY is like FILE, except the document source is kept in memory. You +# may wish to adjust DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE +# accordingly. +# NONE is the default; the document source is not cached, and is reloaded +# from the network when needed. +# +#SOURCE_CACHE:NONE + + +.h2 SOURCE_CACHE_FOR_ABORTED +# This setting controls what will happen with cached source for the document +# being fetched from the net if fetching was aborted (either user pressed +# 'z' or network went down). If set to KEEP, the source fetched so far will +# be preserved (and used as cache), if set to DROP lynx will drop the +# source cache for that document (i.e. only completely downloaded documents +# will be cached in that case). +#SOURCE_CACHE_FOR_ABORTED:DROP + +.h2 ALWAYS_RESUBMIT_POSTS +# If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms +# with method POST, dumping any cache from a previous submission of the +# form, including when the document returned by that form is sought with +# the PREV_DOC command or via the history list. Lynx always resubmits +# forms with method POST when a submit button or a submitting text input +# is activated, but normally retrieves the previously returned document +# if it had links which you activated, and then go back with the PREV_DOC +# command or via the history list. +# +# The default defined here or in userdefs.h can be toggled via +# the -resubmit_forms command line switch. +# +#ALWAYS_RESUBMIT_POSTS:FALSE + +.h2 TRIM_INPUT_FIELDS +# If TRIM_INPUT_FIELDS is set TRUE, Lynx will trim trailing whitespace (e.g., +# space, tab, carriage return, line feed and form feed) from the text entered +# into form text and textarea fields. Older versions of Lynx do this trimming +# unconditionally, but other browsers do not, which would yield different +# behavior for CGI scripts. +#TRIM_INPUT_FIELDS:FALSE + +.h1 HTML Parsing + +.h2 NO_ISMAP_IF_USEMAP +# If NO_ISMAP_IF_USEMAP is set TRUE, Lynx will not include a link to the +# server-side image map if both a server-side and client-side map for the +# same image is indicated in the HTML markup. The compilation default is +# FALSE, such that a link with "[ISMAP]" as the link name, followed by a +# hyphen, will be prepended to the ALT string or "[USEMAP]" pseudo-ALT for +# accessing Lynx's text-based rendition of the client-side map (based on +# the content of the associated MAP element). If the "[ISMAP]" link is +# activated, Lynx will send a 0,0 coordinate pair to the server, which +# Lynx-friendly sites can map to a for-text-client document, homologous +# to what is intended for the content of a FIG element. +# +# The compilation default, or default defined here, can be toggled via +# the "-ismap" command line switch. +# +#NO_ISMAP_IF_USEMAP:FALSE + + +.h2 SEEK_FRAG_MAP_IN_CUR +# If SEEK_FRAG_MAP_IN_CUR is set FALSE, then USEMAP attribute values +# (in IMG or OBJECT tags) consisting of only a fragment (USEMAP="#foo") +# will be resolved with respect to the current document's base, which +# might not be the same as the current document's URL. +# The compilation default is to use the current document's URL in all +# cases (i.e., assume the MAP is present below, if it wasn't present +# above the point in the HTML stream where the USEMAP attribute was +# detected). Lynx's present "single pass" rendering engine precludes +# checking below before making the decision on how to resolve a USEMAP +# reference consisting solely of a fragment. +# +#SEEK_FRAG_MAP_IN_CUR:TRUE + + +.h2 SEEK_FRAG_AREA_IN_CUR +# If SEEK_FRAG_AREA_IN_CUR is set FALSE, then HREF attribute values +# in AREA tags consisting of only a fragment (HREF="#foo") will be +# resolved with respect to the current document's base, which might +# not be the same as the current document's URL. The compilation +# default is to use the current document's URL, as is done for the +# HREF attribute values of Anchors and LINKs that consist solely of +# a fragment. +# +#SEEK_FRAG_AREA_IN_CUR:TRUE + + +.h1 CGI scripts +# These settings control Lynx's ability to execute various types of scripts. + +.h2 LOCAL_EXECUTION_LINKS_ALWAYS_ON +.h2 LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE +# Local execution links and scripts are by default completely disabled, +# unless a change is made to the userdefs.h file to enable them or +# the configure script is used with the corresponding options +# (--enable-exec-links and --enable-exec-scripts). +# See the Lynx source code distribution and the userdefs.h +# file for more detail on enabling execution links and scripts. +# +# If you have enabled execution links or scripts the following +# two variables control Lynx's action when an execution link +# or script is encountered. +# +# If LOCAL_EXECUTION_LINKS_ALWAYS_ON is set to TRUE any execution +# link or script will be executed no matter where it came from. +# This is EXTREMELY dangerous. Since Lynx can access files from +# anywhere in the world, you may encounter links or scripts that +# will cause damage or compromise the security of your system. +# +# If LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE is set to TRUE only +# links or scripts that reside on the local machine and are +# referenced with a URL beginning with "file://localhost/" or meet +# TRUSTED_EXEC or ALWAYS_TRUSTED_EXEC rules (see below) will be +# executed. This is much less dangerous than enabling all execution +# links, but can still be dangerous. +# +#LOCAL_EXECUTION_LINKS_ALWAYS_ON:FALSE +#LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:FALSE + + +.h2 TRUSTED_EXEC +# If LOCAL_EXECUTION_LINK_ON_BUT_NOT_REMOTE is TRUE, and no TRUSTED_EXEC +# rule is defined, it defaults to "file://localhost/" and any lynxexec +# or lynxprog command will be permitted if it was referenced from within +# a document whose URL begins with that string. If you wish to restrict the +# referencing URLs further, you can extend the string to include a trusted +# path. You also can specify a trusted directory for http URLs, which will +# then be treated as if they were local rather than remote. For example: +# +# TRUSTED_EXEC:file://localhost/trusted/ +# TRUSTED_EXEC:http://www.wfbr.edu/trusted/ +# +# If you also wish to restrict the commands which can be executed, create +# a series of rules with the path (Unix) or command name (VMS) following +# the string, separated by a tab. For example: +# +# Unix: +# ==== +# TRUSTED_EXEC:file://localhost//bin/cp +# TRUSTED_EXEC:file://localhost//bin/rm +# VMS: +# === +# TRUSTED_EXEC:file://localhost/copy +# TRUSTED_EXEC:file://localhost/delete +# +# Once you specify a TRUSTED_EXEC referencing string, the default is +# replaced, and all the referencing strings you desire must be specified +# as a series. Similarly, if you associate a command with the referencing +# string, you must specify all of the allowable commands as a series of +# TRUSTED_EXEC rules for that string. If you specify ALWAYS_TRUSTED_EXEC +# rules below, you need not repeat them as TRUSTED_EXEC rules. +# +# If EXEC_LINKS and JUMPFILE have been defined, any lynxexec or lynxprog +# URLs in that file will be permitted, regardless of other settings. If +# you also set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE:TRUE and a single +# TRUSTED_EXEC rule that will always fail (e.g., "none"), then *ONLY* the +# lynxexec or lynxprog URLs in JUMPFILE (and any ALWAYS_TRUSTED_EXEC rules, +# see below) will be allowed. Note, however, that if Lynx was compiled with +# CAN_ANONYMOUS_JUMP set to FALSE (default is TRUE), or -restrictions=jump +# is included with the -anonymous switch at run time, then users of an +# anonymous account will not be able to access the jumps file or enter +# 'j'ump shortcuts, and this selective execution feature will be overridden +# as well (i.e., they will only be able to access lynxexec or lynxprog +# URLs which meet any ALWAYS_TRUSTED_EXEC rules). +# +#TRUSTED_EXEC:none + + +.h2 ALWAYS_TRUSTED_EXEC +# If EXEC_LINKS was defined, any lynxexec or lynxprog URL can be made +# always enabled by an ALWAYS_TRUSTED_EXEC rule for it. This is useful for +# anonymous accounts in which you have disabled execution links generally, +# and may also have disabled jumps file links, but still want to allow +# execution of particular utility scripts or programs. The format is +# like that for TRUSTED_EXEC. For example: +# +# Unix: +# ==== +# ALWAYS_TRUSTED_EXEC:file://localhost//usr/local/kinetic/bin/usertime +# ALWAYS_TRUSTED_EXEC:http://www.more.net//usr/local/kinetic/bin/who.sh +# VMS: +# === +# ALWAYS_TRUSTED_EXEC:file://localhost/usertime +# ALWAYS_TRUSTED_EXEC:http://www.more.net/show users +# +# The default ALWAYS_TRUSTED_EXEC rule is "none". +# +#ALWAYS_TRUSTED_EXEC:none + + +.h2 TRUSTED_LYNXCGI +# Unix: +# ===== +# TRUSTED_LYNXCGI rules define the permitted sources and/or paths for +# lynxcgi links (if LYNXCGI_LINKS is defined in userdefs.h). The format +# is the same as for TRUSTED_EXEC rules (see above). Example rules: +# +# TRUSTED_LYNXCGI:file://localhost/ +# TRUSTED_LYNXCGI:/usr/local/etc/httpd/cgi-bin/ +# TRUSTED_LYNXCGI:file://localhost//usr/local/www/cgi-bin/ +# +# VMS: +# ==== +# Do not define this. +# +# The default TRUSTED_LYNXCGI rule is "none". +# +#TRUSTED_LYNXCGI:none + + +.h2 LYNXCGI_ENVIRONMENT +# Unix: +# ===== +# LYNXCGI_ENVIRONMENT adds the current value of the specified +# environment variable to the list of environment variables passed on to the +# lynxcgi script. Useful variables are HOME, USER, etc... If proxies +# are in use, and the script invokes another copy of lynx (or a program like +# wget) in a subsidiary role, it can be useful to add http_proxy and other +# *_proxy variables. +# +# VMS: +# ==== +# Do not define this. +# +#LYNXCGI_ENVIRONMENT: + + +.h2 LYNXCGI_DOCUMENT_ROOT +# Unix: +# ===== +# LYNXCGI_DOCUMENT_ROOT is the value of DOCUMENT_ROOT that will be passed +# to lynxcgi scripts. If set and the URL has PATH_INFO data, then +# PATH_TRANSLATED will also be generated. Examples: +# LYNXCGI_DOCUMENT_ROOT:/usr/local/etc/httpd/htdocs +# LYNXCGI_DOCUMENT_ROOT:/data/htdocs/ +# +# VMS: +# ==== +# Do not define this. +# +#LYNXCGI_DOCUMENT_ROOT: + + +.h1 Cookies + +.h2 FORCE_SSL_COOKIES_SECURE +# If FORCE_SSL_COOKIES_SECURE is set to TRUE, then SSL encrypted cookies +# received from https servers never will be sent unencrypted to http +# servers. The compilation default is to impose this block only if the +# https server included a secure attribute for the cookie. The normal +# default or that defined here can be toggled via the -force_secure +# command line switch. +# +#FORCE_SSL_COOKIES_SECURE:FALSE + + +.h1 Internal Behavior + +.h2 MAIL_SYSTEM_ERROR_LOGGING +# MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of +# the information, or ALERTMAIL if there is no owner, every time +# that a document cannot be accessed! +# +# NOTE: This can generate A LOT of mail, be warned. +# +#MAIL_SYSTEM_ERROR_LOGGING:FALSE + + +.h2 CHECKMAIL +# If CHECKMAIL is set to TRUE, the user will be informed (via a statusline +# message) about the existence of any unread mail at startup of Lynx, and +# will get statusline messages if subsequent new mail arrives. If a jumps +# file with a lynxprog URL for invoking mail is available, or your html +# pages include an mail launch file URL, the user thereby can access mail +# and read the messages. The checks and statusline reports will not be +# performed if Lynx has been invoked with the -restrictions=mail switch. +# +# VMS USERS !!! +# ============= +# New mail is normally broadcast as it arrives, via "unsolicited screen +# broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W +# command. You may prefer to disable the broadcasts and use CHECKMAIL +# instead (e.g., in a public account which will be used by people who +# are ignorant about VMS). +# +#CHECKMAIL:FALSE + + +.h1 News-groups + +.h2 NNTPSERVER +# To enable news reading ability via Lynx, the environment variable NNTPSERVER +# must be set so that it points to your site's NNTP server +# (see Lynx Users Guide on environment variables). +# Lynx respects RFC 1738 (http://www.ics.uci.edu/pub/ietf/uri/rfc1738.txt) +# and does not accept a host field in news URLs (use nntp: instead of news: for +# the scheme if you wish to specify an NNTP host in a URL, as explained in the +# RFC). If you have not set the variable externally, you can set it at run +# time via this configuration file. It will not override an external setting. +# Note that on VMS it is set as a process logical rather than symbol, and will +# outlive the Lynx image. +# The news reading facility in Lynx is quite limited. Lynx does not provide a +# full featured news reader with elaborate error checking and safety features. +# +#NNTPSERVER:news.server.dom + + +.h2 LIST_NEWS_NUMBERS +# If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list and include +# the numbers of articles in news listings, instead of using an unordered +# list. The default is defined in userdefs.h, and can be overridden here. +# +#LIST_NEWS_NUMBERS:FALSE + + +.h2 LIST_NEWS_DATES +# If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of articles in +# news listings. The dates always are included in the articles, themselves. +# The default is defined in userdefs.h, and can be overridden here. +# +#LIST_NEWS_DATES:FALSE + + +.h2 NEWS_CHUNK_SIZE +.h2 NEWS_MAX_CHUNK +# NEWS_CHUNK_SIZE and NEWS_MAX_CHUNK regulate the chunking of news article +# listings with inclusion of links for listing earlier and/or later articles. +# The defaults are defined in HTNews.c as 30 and 40, respectively. If the +# news group contains more than NEWS_MAX_CHUNK articles, they will be listed +# in NEWS_CHUNK_SIZE chunks. You can change the defaults here, and/or on +# the command line via -newschunksize=NUMBER and/or -newsmaxchunk=NUMBER +# switches. Note that if the chunk size is increased, here or on the command +# line, to a value greater than the current maximum, the maximum will be +# increased to that number. Conversely, if the maximum is set to a number +# less than the current chunk size, the chunk size will be reduced to that +# number. Thus, you need use only one of the two switches on the command +# line, based on the direction of intended change relative to the compilation +# or configuration defaults. The compilation defaults ensure that there will +# be at least 10 earlier articles before bothering to chunk and create a link +# for earlier articles. +# +#NEWS_CHUNK_SIZE:30 +#NEWS_MAX_CHUNK:40 + + +.h2 NEWS_POSTING +# Set NEWS_POSTING to FALSE if you do not want to support posting to +# news groups via Lynx. If left TRUE, Lynx will use its news gateway to +# post new messages or followups to news groups, using the URL schemes +# described in the "Supported URLs" section of the online 'h'elp. The +# posts will be attempted via the nntp server specified in the URL, or +# if none was specified, via the NNTPSERVER configuration or environment +# variable. Links with these URLs for posting or sending followups are +# created by the news gateway when reading group listings or articles +# from nntp servers if the server indicates that it permits posting. +# The compilation default set in userdefs.h can be changed here. If +# the default is TRUE, posting can still be disallowed via the +# -restrictions command line switch. +# The posting facility in Lynx is quite limited. Lynx does not provide a +# full featured news poster with elaborate error checking and safety features. +# +#NEWS_POSTING:TRUE + + +.h2 LYNX_SIG_FILE +# LYNX_SIG_FILE defines the name of a file containing a signature which +# can be appended to email messages and news postings or followups. The +# user will be prompted whether to append it. It is sought in the home +# directory. If it is in a subdirectory, begin it with a dot-slash +# (e.g., ./lynx/.lynxsig). The definition is set in userdefs.h and can +# be changed here. +# +#LYNX_SIG_FILE:.lynxsig + +.h1 Bibliographic Protocol (bibp scheme) + +.h2 BIBP_GLOBAL_SERVER +# BIBP_GLOBAL_SERVER is the default global server for bibp: links, used +# when a local bibhost or document-specified citehost is unavailable. +# Set in userdefs.h and can be changed here. +#BIBP_GLOBAL_SERVER:http://usin.org/ + +.h2 BIBP_BIBHOST +# BIBP_BIBHOST is the URL at which local bibp service may be found, if +# it exists. Defaults to http://bibhost/ for protocol conformance, but +# may be overridden here or via --bibhost parameter. +#BIBP_BIBHOST:http://bibhost/ + +.h1 Interaction +# These settings control interaction of the user with lynx. + +.h2 SCROLLBAR +# If SCROLLBAR is set TRUE, Lynx will show scrollbar on windows. With mouse +# enabled, the scrollbar strip outside the bar is clickable, and scrolls the +# window by pages. The appearance of the scrollbar can be changed from +# LYNX_LSS file: define attributes scroll.bar, scroll.back (for the bar, and +# for the strip along which the scrollbar moves). +#SCROLLBAR:FALSE + + +.h2 SCROLLBAR_ARROW +# If SCROLLBAR_ARROW is set TRUE, Lynx's scrollbar will have arrows at the +# ends. With mouse enabled, the arrows are clickable, and scroll the window by +# 2 lines. The appearance of the scrollbar arrows can be changed from LYNX_LSS +# file: define attributes scroll.arrow, scroll.noarrow (for enabled-arrows, +# and disabled arrows). An arrow is "disabled" if the bar is at this end of +# the strip. +#SCROLLBAR_ARROW:TRUE + + +.h2 USE_MOUSE +# If Lynx is configured with ncurses, PDcurses or slang & USE_MOUSE is TRUE, +# users can perform commands by left-clicking certain parts of the screen: +# on a link = `g'oto + ACTIVATE (i.e., move highlight & follow the link); +# on the top/bottom lines = PREV/NEXT_PAGE (i.e., go up/down 1 page); +# on the top/bottom left corners = PREV/NEXT_DOC (i.e., go to the previous +# document / undo goto previous document); +# on the top/bottom right corners = HISTORY/VLINKS (i.e., call up the history +# page or visited links page if on history page). +# NB if the mouse is defined in this way, it will not be available +# for copy/paste operations using the clipboard of a desktop manager: +# for flexibility instead, use the command-line switch -use_mouse . +# +# ncurses and slang have built-in support for the xterm mouse protocol. In +# addition, ncurses can be linked with the gpm mouse library, to automatically +# provide support for this interface in applications such as Lynx. (Please +# read the ncurses faq to work around broken gpm configurations packaged by +# some distributors). PDCurses implements mouse support for win32 console +# windows, as does slang. +#USE_MOUSE:FALSE + + +.h1 HTML Parsing +# These settings control the way Lynx parses invalid HTML +# and how it may resolve such issues. + +.h2 COLLAPSE_BR_TAGS +# If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial BR tags. +# If set TRUE, two or more concurrent BRs will be collapsed into a single +# line break. Note that the valid way to insert extra blank lines in HTML +# is via a PRE block with only newlines in the block. +# +#COLLAPSE_BR_TAGS:TRUE + + +.h2 TAGSOUP +# If TAGSOUP is set, Lynx uses the "Tag Soup DTD" rather than "SortaSGML". +# The two approaches differ by the style of error detection and recovery. +# Tag Soup DTD allows for improperly nested tags; SortaSGML is stricter. +#TAGSOUP:FALSE + + +.h1 Cookies + +.h2 SET_COOKIES +# If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers +# in http server replies. Note that if a COOKIE_FILE is in use (see +# below) that contains cookies at startup, Lynx will still send those +# persistent cookies in requests as appropriate. Setting SET_COOKIES +# to FALSE just prevents accepting any new cookies from servers. To +# prevent all cookie processing (sending *and* receiving) in a session, +# make sure that PERSISTENT_COOKIES is not TRUE or that COOKIE_FILE does +# not point to a file with cookies, in addition to setting SET_COOKIES +# to FALSE. +# The default is defined in userdefs.h, and can be overridden here, +# and/or toggled via the -cookies command line switch. +# +#SET_COOKIES:TRUE + + +.h2 ACCEPT_ALL_COOKIES +# If ACCEPT_ALL_COOKIES is set TRUE, Lynx will accept cookies from all +# domains with no user interaction. This is equivalent to automatically +# replying to all cookie 'Allow?' prompts with 'A'lways. Note that it +# does not preempt validity checking, which has to be controlled separately +# (see below). +# The default is defined in userdefs.h and can be overridden here, or +# in the .lynxrc file via an o(ptions) screen setting. It may also be +# toggled via the -accept_all_cookies command line switch. +# +#ACCEPT_ALL_COOKIES:FALSE + + +.h2 COOKIE_ACCEPT_DOMAINS +.h2 COOKIE_REJECT_DOMAINS +# COOKIE_ACCEPT_DOMAINS and COOKIE_REJECT_DOMAINS are comma-delimited lists +# of domains from which Lynx should automatically accept or reject cookies +# without asking for confirmation. If the same domain is specified in both +# lists, rejection will take precedence. +# Note that in order to match cookies, domains have to be spelled out exactly +# in the form in which they would appear on the Cookie Jar page (case is +# insignificant). They are not wildcards. Domains that apply to more than +# one host have a leading '.', but have to match *the cookie's* domain +# exactly. +# +#COOKIE_ACCEPT_DOMAINS: +#COOKIE_REJECT_DOMAINS: + + +.h2 COOKIE_LOOSE_INVALID_DOMAINS +.h2 COOKIE_STRICT_INVALID_DOMAINS +.h2 COOKIE_QUERY_INVALID_DOMAINS +# COOKIE_LOOSE_INVALID_DOMAINS, COOKIE_STRICT_INVALID_DOMAINS, and +# COOKIE_QUERY_INVALID_DOMAINS are comma-delimited lists of domains. +# They control the degree of validity checking that is applied to cookies +# for the specified domains. +# Note that in order to match cookies, domains have to be spelled out exactly +# in the form in which they would appear on the Cookie Jar page (case is +# insignificant). They are not wildcards. Domains that apply to more than +# one host have a leading '.', but have to match *the cookie's* domain +# exactly. +# If a domain is set to strict checking, strict conformance to RFC2109 will +# be applied. A domain with loose checking will be allowed to set cookies +# with an invalid path or domain attribute. All domains will default to +# asking the user for confirmation in case of an invalid path or domain. +# Cookie validity checking takes place as a separate step before the +# final decision to accept or reject (see previous options), therefore +# a cookie that passes validity checking may still be automatically +# rejected or cause another prompt. +# +#COOKIE_LOOSE_INVALID_DOMAINS: +#COOKIE_STRICT_INVALID_DOMAINS: +#COOKIE_QUERY_INVALID_DOMAINS: + +.h2 MAX_COOKIES_DOMAIN +.h2 MAX_COOKIES_GLOBAL +.h2 MAX_COOKIES_BUFFER +# MAX_COOKIES_DOMAIN, +# MAX_COOKIES_GLOBAL and +# MAX_COOKIES_BUFFER are limits on the total number of cookies for each domain, +# globally, and the per-cookie buffer size. These limits are by default large +# enough for reasonable usage; if they are very high, some sites may present +# undue performance waste. +# +#MAX_COOKIES_DOMAIN:50 +#MAX_COOKIES_GLOBAL:500 +#MAX_COOKIES_BUFFER:4096 + +.h2 PERSISTENT_COOKIES +# PERSISTENT_COOKIES indicates that cookies should be read at startup from +# the COOKIE_FILE, and saved at exit for storage between Lynx sessions. +# It is not used if Lynx was compiled without USE_PERSISTENT_COOKIES. +# The default is FALSE, so that the feature needs to be enabled here +# explicitly if you want it. +# +#PERSISTENT_COOKIES:FALSE + + +.h2 COOKIE_FILE +# COOKIE_FILE is the default file from which persistent cookies are read +# at startup (if the file exists), if Lynx was compiled with +# USE_PERSISTENT_COOKIES and the PERSISTENT_COOKIES option is enabled. +# The cookie file can also be specified in .lynxrc or on the command line. +# +#COOKIE_FILE:~/.lynx_cookies + + +.h2 COOKIE_SAVE_FILE +# COOKIE_SAVE_FILE is the default file in which persistent cookies are +# stored at exit, if Lynx was compiled with USE_PERSISTENT_COOKIES and the +# PERSISTENT_COOKIES option is enabled. The cookie save file can also be +# specified on the command line. +# +# With an interactive Lynx session, COOKIE_SAVE_FILE will default to +# COOKIE_FILE if it is not set. With a non-interactive Lynx session (e.g., +# -dump), cookies will only be saved to file if COOKIE_SAVE_FILE is set. +# +#COOKIE_SAVE_FILE:~/.lynx_cookies + + +.h1 Mail-related + +.h2 SYSTEM_MAIL +.h2 SYSTEM_MAIL_FLAGS +# VMS: +# === +# The mail command and qualifiers are defined in userdefs.h. Lynx +# will spawn a subprocess to send replies and error messages. The +# command, and qualifiers (if any), can be re-defined here. If +# you use PMDF then headers will we passed via a header file. +# If you use "generic" VMS MAIL, the subject will be passed on the +# command line via a /subject="SUBJECT" qualifier, and inclusion +# of other relevant headers may not be possible. +# If your mailer uses another syntax, some hacking of the mailform() +# mailmsg() and reply_by_mail() functions in LYMail.c, and send_file_to_mail() +# function in LYPrint.c, may be required. +# +.ex 2 +#SYSTEM_MAIL:PMDF SEND +#SYSTEM_MAIL_FLAGS:/headers +# +.ex 2 +#SYSTEM_MAIL:MAIL +#SYSTEM_MAIL_FLAGS: +# +# Unix: +#====== +# The mail path and flags normally are defined for sendmail (or submit +# with MMDF) in userdefs.h. You can change them here, but should first +# read the zillions of CERT advisories about security problems with Unix +# mailers. +# +.ex 2 +#SYSTEM_MAIL:/usr/mmdf/bin/submit +#SYSTEM_MAIL_FLAGS:-mlruxto,cc\* +# +.ex 2 +#SYSTEM_MAIL:/usr/sbin/sendmail +#SYSTEM_MAIL_FLAGS:-t -oi +# +.ex 2 +#SYSTEM_MAIL:/usr/lib/sendmail +#SYSTEM_MAIL_FLAGS:-t -oi + +# Win32: +#======= +# Please read sendmail.txt in the LYNX_W32.ZIP distribution +# +#SYSTEM_MAIL:sendmail -f me@my.host -h my.host -r my.smtp.mailer -m SMTP + + +.h2 MAIL_ADRS +# VMS ONLY: +# ======== +# MAIL_ADRS is defined in userdefs.h and normally is structured for PMDF's +# IN%"INTERNET_ADDRESS" scheme. The %s is replaced with the address given +# by the user. If you are using a different Internet mail transport, change +# the IN appropriately (e.g., to SMTP, MX, or WINS). +# +#MAIL_ADRS:"IN%%""%s""" + + +.h2 USE_FIXED_RECORDS +# VMS ONLY: +# ======== +# If USE_FIXED_RECORDS is set to TRUE here or in userdefs.h, Lynx will +# convert 'd'ownloaded binary files to FIXED 512 record format before saving +# them to disk or acting on a DOWNLOADER option. If set to FALSE, the +# headers of such files will indicate that they are Stream_LF with Implied +# Carriage Control, which is incorrect, and can cause downloading software +# to get confused and unhappy. If you do set it FALSE, you can use the +# FIXED512.COM command file, which is included in this distribution, to do +# the conversion externally. +# +#USE_FIXED_RECORDS:TRUE + + +.h1 Keyboard Input +# These settings control the way Lynx interprets user input. + + +.h2 VI_KEYS_ALWAYS_ON +.h2 EMACS_KEYS_ALWAYS_ON +# Vi or Emacs movement keys, i.e. familiar hjkl or ^N^P^F^B . +# These are defaults, which can be changed in the Options Menu or .lynxrc . +#VI_KEYS_ALWAYS_ON:FALSE +#EMACS_KEYS_ALWAYS_ON:FALSE + + +.h2 DEFAULT_KEYPAD_MODE +# DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS +# or LINKS_ARE_NOT_NUMBERED (the same) +# or LINKS_ARE_NUMBERED +# or LINKS_AND_FIELDS_ARE_NUMBERED +# or FIELDS_ARE_NUMBERED +# to specify whether numbers (e.g. [10]) appear next to all links, +# allowing immediate access by entering the number on the keyboard, +# or numbers on the numeric key-pad work like arrows; +# the "FIELDS" options cause form fields also to be numbered. +# This may be overridden by the keypad_mode setting in .lynxrc, +# and can also be changed via the Options Menu. +# +#DEFAULT_KEYPAD_MODE:NUMBERS_AS_ARROWS + + +.h2 NUMBER_LINKS_ON_LEFT +.h2 NUMBER_FIELDS_ON_LEFT +# Denotes the position for link- and field-numbers (whether it is on the left +# or right of the anchor). These are subject to DEFAULT_KEYPAD_MODE, which +# determines whether numbers are shown. +#NUMBER_LINKS_ON_LEFT:TRUE +#NUMBER_FIELDS_ON_LEFT:TRUE + +.h2 DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS +# Obsolete form of DEFAULT_KEYPAD_MODE, +# numbers work like arrows or numbered links. +# Set to TRUE, indicates numbers act as arrows, +# and set to FALSE indicates numbers refer to numbered links on the page. +# LINKS_AND_FIELDS_ARE_NUMBERED cannot be set by this option because +# it allows only two values (true and false). +# +#DEFAULT_KEYPAD_MODE_IS_NUMBERS_AS_ARROWS:TRUE + + +.h2 CASE_SENSITIVE_ALWAYS_ON +# The default search type. +# This is a default that can be overridden by the user! +# +#CASE_SENSITIVE_ALWAYS_ON:FALSE + + +.h1 Auxiliary Facilities + +.h2 DEFAULT_BOOKMARK_FILE +# DEFAULT_BOOKMARK_FILE is the filename used for storing personal bookmarks. +# It will be prepended by the user's home directory. +# NOTE that a file ending in .html or other suffix mapped to text/html +# should be used to ensure its treatment as HTML. The built-in default +# is lynx_bookmarks.html. On both Unix and VMS, if a subdirectory off of +# the HOME directory is desired, the path should begin with "./" (e.g., +# ./BM/lynx_bookmarks.html), but the subdirectory must already exist. +# Lynx will create the bookmark file, if it does not already exist, on +# the first ADD_BOOKMARK attempt if the HOME directory is indicated +# (i.e., if the definition is just filename.html without any slashes), +# but requires a pre-existing subdirectory to create the file there. +# The user can re-define the default bookmark file, as well as a set +# of sub-bookmark files if multiple bookmark file support is enabled +# (see below), via the 'o'ptions menu, and can save those definitions +# in the .lynxrc file. +# +#DEFAULT_BOOKMARK_FILE:lynx_bookmarks.html + + +.h2 MULTI_BOOKMARK_SUPPORT +# If MULTI_BOOKMARK_SUPPORT is set TRUE, and BLOCK_MULTI_BOOKMARKS (see +# below) is FALSE, and sub-bookmarks exist, all bookmark operations will +# first prompt the user to select an active sub-bookmark file or the +# default bookmark file. FALSE is the default so that one (the default) +# bookmark file will be available initially. The definition here will +# override that in userdefs.h. The user can turn on multiple bookmark +# support via the 'o'ptions menu, and can save that choice as the startup +# default via the .lynxrc file. When on, the setting can be STANDARD or +# ADVANCED. If SUPPORT is set to the latter, and the user mode also is +# ADVANCED, the VIEW_BOOKMARK command will invoke a statusline prompt at +# which the user can enter the letter token (A - Z) of the desired bookmark, +# or '=' to get a menu of available bookmark files. The menu always is +# presented in NOVICE or INTERMEDIATE mode, or if the SUPPORT is set to +# STANDARD. No prompting or menu display occurs if only one (the startup +# default) bookmark file has been defined (define additional ones via the +# 'o'ptions menu). The startup default, however set, can be overridden on +# the command line via the -restrictions=multibook or the -anonymous or +# -validate switches. +# +#MULTI_BOOKMARK_SUPPORT:FALSE + + +.h2 BLOCK_MULTI_BOOKMARKS +# If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will +# be forced off, and cannot to toggled on via the 'o'ptions menu. The +# compilation setting is normally FALSE, and can be overridden here. +# It can also be set via the -restrictions=multibook or the -anonymous +# or -validate command line switches. +# +#BLOCK_MULTI_BOOKMARKS:FALSE + + +.h1 Interaction + +.h2 DEFAULT_USER_MODE +# DEFAULT_USER_MODE sets the default user mode for Lynx users. +# NOVICE shows a three line help message at the bottom of the screen. +# INTERMEDIATE shows normal amount of help (one line). +# ADVANCED help is replaced by the URL of the current link. +# +#DEFAULT_USER_MODE:NOVICE + + +.h1 External Programs + +.h2 DEFAULT_EDITOR +# If DEFAULT_EDITOR is defined, users may edit local documents with it +# & it will also be used for sending mail messages. +# If no editor is defined here or by the user, +# the user will not be able to edit local documents +# and a primitive line-oriented mail-input mode will be used. +# +# For sysadmins: do not define a default editor +# unless you know EVERY user will know how to use it; +# users can easily define their own editor in the Options Menu. +# +#DEFAULT_EDITOR: + + +.h2 SYSTEM_EDITOR +# SYSTEM_EDITOR behaves the same as DEFAULT_EDITOR, +# except that it can't be changed by users. +# +#SYSTEM_EDITOR: + +.h3 POSITIONABLE_EDITOR +# If POSITIONABLE_EDITOR is defined once or multiple times and if the same +# editor is used as editor in lynx, lynx will use its features, i.e., adding an +# option to set the initial line-position, when editing files and textarea. +# The commented editors below are already known; there is no need to uncomment +# them. +# +#POSITIONABLE_EDITOR:emacs +#POSITIONABLE_EDITOR:jed +#POSITIONABLE_EDITOR:jmacs +#POSITIONABLE_EDITOR:joe +#POSITIONABLE_EDITOR:jove +#POSITIONABLE_EDITOR:jpico +#POSITIONABLE_EDITOR:jstar +#POSITIONABLE_EDITOR:nano +#POSITIONABLE_EDITOR:pico +#POSITIONABLE_EDITOR:rjoe +#POSITIONABLE_EDITOR:vi + +.h1 Proxy + +.h2 HTTP_PROXY +.h2 HTTPS_PROXY +.h2 FTP_PROXY +.h2 GOPHER_PROXY +.h2 NEWSPOST_PROXY +.h2 NEWSREPLY_PROXY +.h2 NEWS_PROXY +.h2 NNTP_PROXY +.h2 SNEWSPOST_PROXY +.h2 SNEWSREPLY_PROXY +.h2 SNEWS_PROXY +.h2 WAIS_PROXY +.h2 FINGER_PROXY +.h2 CSO_PROXY +# Lynx version 2.2 and beyond supports the use of proxy servers that can act as +# firewall gateways and caching servers. They are preferable to the older +# gateway servers. Each protocol used by Lynx can be mapped separately using +# PROTOCOL_proxy environment variables (see Lynx Users Guide). If you have not set +# them externally, you can set them at run time via this configuration file. +# They will not override external settings. The no_proxy variable can be used +# to inhibit proxying to selected regions of the Web (see below). Note that on +# VMS these proxy variables are set as process logicals rather than symbols, to +# preserve lowercasing, and will outlive the Lynx image. +# +.ex 15 +#http_proxy:http://some.server.dom:port/ +#https_proxy:http://some.server.dom:port/ +#ftp_proxy:http://some.server.dom:port/ +#gopher_proxy:http://some.server.dom:port/ +#news_proxy:http://some.server.dom:port/ +#newspost_proxy:http://some.server.dom:port/ +#newsreply_proxy:http://some.server.dom:port/ +#snews_proxy:http://some.server.dom:port/ +#snewspost_proxy:http://some.server.dom:port/ +#snewsreply_proxy:http://some.server.dom:port/ +#nntp_proxy:http://some.server.dom:port/ +#wais_proxy:http://some.server.dom:port/ +#finger_proxy:http://some.server.dom:port/ +#cso_proxy:http://some.server.dom:port/ +#no_proxy:host.domain.dom + + +.h2 NO_PROXY +# The no_proxy variable can be a comma-separated list of strings defining +# no-proxy zones in the DNS domain name space. If a tail substring of the +# domain-path for a host matches one of these strings, transactions with that +# node will not be proxied. +.ex +#no_proxy:domain.path1,path2 +# +# A single asterisk as an entry will override all proxy variables and no +# transactions will be proxied. +.ex +#no_proxy:* +# This is the only allowed use of * in no_proxy. +# +# Warning: Note that setting 'il' as an entry in this list will block proxying +# for the .mil domain as well as the .il domain. If the entry is '.il' this +# will not happen. + + +.h1 External Programs + +.h2 PRINTER +.h2 DOWNLOADER +.h2 UPLOADER +# PRINTER, DOWNLOADER & UPLOADER DEFINITIONS: +# Lynx has 4 pre-defined print options & 1 pre-defined download option, +# which are called up on-screen when `p' or `d' are entered; +# any number of options can be added by the user, as explained below. +# Uploaders can be defined only for UNIX with DIRED_SUPPORT: +# see the Makefile in the top directory & the header of src/LYUpload.c . +# +# For `p' pre-defined options are: `Save to local file', `E-mail the file', +# `Print to screen' and `Print to local printer attached to vt100'. +# `Print to screen' allows file transfers in the absence of alternatives +# and is often the only option allowed here for anonymous users; +# the 3rd & 4th options are not pre-defined for DOS/WINDOWS versions of Lynx. +# For `d' the pre-defined option is: `Download to local file'. +# +# To define your own print or download option use the following formats: +# +# PRINTER:::