From: Frank Brehm Date: Wed, 1 Feb 2012 10:02:49 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.de/?a=commitdiff_plain;h=6822ea2a1d237c56c2b07a26f1251518b375a54f;p=config%2Fbruni%2Fetc.git Current state --- diff --git a/config-archive/etc/courier/authlib/authdaemonrc b/config-archive/etc/courier/authlib/authdaemonrc new file mode 100644 index 00000000..9dba818d --- /dev/null +++ b/config-archive/etc/courier/authlib/authdaemonrc @@ -0,0 +1,103 @@ +##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ +# +# Copyright 2000-2005 Double Precision, Inc. See COPYING for +# distribution information. +# +# authdaemonrc created from authdaemonrc.dist by sysconftool +# +# Do not alter lines that begin with ##, they are used when upgrading +# this configuration. +# +# This file configures authdaemond, the resident authentication daemon. +# +# Comments in this file are ignored. Although this file is intended to +# be sourced as a shell script, authdaemond parses it manually, so +# the acceptable syntax is a bit limited. Multiline variable contents, +# with the \ continuation character, are not allowed. Everything must +# fit on one line. Do not use any additional whitespace for indentation, +# or anything else. + +##NAME: authmodulelist:2 +# +# The authentication modules that are linked into authdaemond. The +# default list is installed. You may selectively disable modules simply +# by removing them from the following list. The available modules you +# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe + +authmodulelist="authmysql " + +##NAME: authmodulelistorig:3 +# +# This setting is used by Courier's webadmin module, and should be left +# alone + +authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe" + +##NAME: daemons:0 +# +# The number of daemon processes that are started. authdaemon is typically +# installed where authentication modules are relatively expensive: such +# as authldap, or authmysql, so it's better to have a number of them running. +# PLEASE NOTE: Some platforms may experience a problem if there's more than +# one daemon. Specifically, SystemV derived platforms that use TLI with +# socket emulation. I'm suspicious of TLI's ability to handle multiple +# processes accepting connections on the same filesystem domain socket. +# +# You may need to increase daemons if as your system load increases. Symptoms +# include sporadic authentication failures. If you start getting +# authentication failures, increase daemons. However, the default of 5 +# SHOULD be sufficient. Bumping up daemon count is only a short-term +# solution. The permanent solution is to add more resources: RAM, faster +# disks, faster CPUs... + +daemons=5 + +##NAME: authdaemonvar:2 +# +# authdaemonvar is here, but is not used directly by authdaemond. It's +# used by various configuration and build scripts, so don't touch it! + +authdaemonvar=/var/lib/courier/authdaemon + +##NAME: DEBUG_LOGIN:0 +# +# Dump additional diagnostics to syslog +# +# DEBUG_LOGIN=0 - turn off debugging +# DEBUG_LOGIN=1 - turn on debugging +# DEBUG_LOGIN=2 - turn on debugging + log passwords too +# +# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. +# +# Note that most information is sent to syslog at level 'debug', so +# you may need to modify your /etc/syslog.conf to be able to see it. + +DEBUG_LOGIN=0 + +##NAME: DEFAULTOPTIONS:0 +# +# A comma-separated list of option=value pairs. Each option is applied +# to an account if the account does not have its own specific value for +# that option. So for example, you can set +# DEFAULTOPTIONS="disablewebmail=1,disableimap=1" +# and then enable webmail and/or imap on individual accounts by setting +# disablewebmail=0 and/or disableimap=0 on the account. + +DEFAULTOPTIONS="" + +##NAME: LOGGEROPTS:0 +# +# courierlogger(1) options, e.g. to set syslog facility +# + +LOGGEROPTS="" + +##NAME: LDAP_TLS_OPTIONS:0 +# +# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. +# Examples: +# +#LDAPTLS_CACERT=/path/to/cacert.pem +#LDAPTLS_REQCERT=demand +#LDAPTLS_CERT=/path/to/clientcert.pem +#LDAPTLS_KEY=/path/to/clientkey.pem diff --git a/config-archive/etc/courier/authlib/authdaemonrc.dist b/config-archive/etc/courier/authlib/authdaemonrc.dist new file mode 100644 index 00000000..afd6adf3 --- /dev/null +++ b/config-archive/etc/courier/authlib/authdaemonrc.dist @@ -0,0 +1,103 @@ +##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ +# +# Copyright 2000-2005 Double Precision, Inc. See COPYING for +# distribution information. +# +# authdaemonrc created from authdaemonrc.dist by sysconftool +# +# Do not alter lines that begin with ##, they are used when upgrading +# this configuration. +# +# This file configures authdaemond, the resident authentication daemon. +# +# Comments in this file are ignored. Although this file is intended to +# be sourced as a shell script, authdaemond parses it manually, so +# the acceptable syntax is a bit limited. Multiline variable contents, +# with the \ continuation character, are not allowed. Everything must +# fit on one line. Do not use any additional whitespace for indentation, +# or anything else. + +##NAME: authmodulelist:2 +# +# The authentication modules that are linked into authdaemond. The +# default list is installed. You may selectively disable modules simply +# by removing them from the following list. The available modules you +# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe + +authmodulelist="authmysql " + +##NAME: authmodulelistorig:3 +# +# This setting is used by Courier's webadmin module, and should be left +# alone + +authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" + +##NAME: daemons:0 +# +# The number of daemon processes that are started. authdaemon is typically +# installed where authentication modules are relatively expensive: such +# as authldap, or authmysql, so it's better to have a number of them running. +# PLEASE NOTE: Some platforms may experience a problem if there's more than +# one daemon. Specifically, SystemV derived platforms that use TLI with +# socket emulation. I'm suspicious of TLI's ability to handle multiple +# processes accepting connections on the same filesystem domain socket. +# +# You may need to increase daemons if as your system load increases. Symptoms +# include sporadic authentication failures. If you start getting +# authentication failures, increase daemons. However, the default of 5 +# SHOULD be sufficient. Bumping up daemon count is only a short-term +# solution. The permanent solution is to add more resources: RAM, faster +# disks, faster CPUs... + +daemons=5 + +##NAME: authdaemonvar:2 +# +# authdaemonvar is here, but is not used directly by authdaemond. It's +# used by various configuration and build scripts, so don't touch it! + +authdaemonvar=/var/lib/courier/authdaemon + +##NAME: DEBUG_LOGIN:0 +# +# Dump additional diagnostics to syslog +# +# DEBUG_LOGIN=0 - turn off debugging +# DEBUG_LOGIN=1 - turn on debugging +# DEBUG_LOGIN=2 - turn on debugging + log passwords too +# +# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. +# +# Note that most information is sent to syslog at level 'debug', so +# you may need to modify your /etc/syslog.conf to be able to see it. + +DEBUG_LOGIN=0 + +##NAME: DEFAULTOPTIONS:0 +# +# A comma-separated list of option=value pairs. Each option is applied +# to an account if the account does not have its own specific value for +# that option. So for example, you can set +# DEFAULTOPTIONS="disablewebmail=1,disableimap=1" +# and then enable webmail and/or imap on individual accounts by setting +# disablewebmail=0 and/or disableimap=0 on the account. + +DEFAULTOPTIONS="" + +##NAME: LOGGEROPTS:0 +# +# courierlogger(1) options, e.g. to set syslog facility +# + +LOGGEROPTS="" + +##NAME: LDAP_TLS_OPTIONS:0 +# +# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. +# Examples: +# +#LDAPTLS_CACERT=/path/to/cacert.pem +#LDAPTLS_REQCERT=demand +#LDAPTLS_CERT=/path/to/clientcert.pem +#LDAPTLS_KEY=/path/to/clientkey.pem diff --git a/config-archive/etc/courier/authlib/authdaemonrc.dist.dist b/config-archive/etc/courier/authlib/authdaemonrc.dist.dist new file mode 100644 index 00000000..b1b26700 --- /dev/null +++ b/config-archive/etc/courier/authlib/authdaemonrc.dist.dist @@ -0,0 +1,103 @@ +##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ +# +# Copyright 2000-2005 Double Precision, Inc. See COPYING for +# distribution information. +# +# authdaemonrc created from authdaemonrc.dist by sysconftool +# +# Do not alter lines that begin with ##, they are used when upgrading +# this configuration. +# +# This file configures authdaemond, the resident authentication daemon. +# +# Comments in this file are ignored. Although this file is intended to +# be sourced as a shell script, authdaemond parses it manually, so +# the acceptable syntax is a bit limited. Multiline variable contents, +# with the \ continuation character, are not allowed. Everything must +# fit on one line. Do not use any additional whitespace for indentation, +# or anything else. + +##NAME: authmodulelist:2 +# +# The authentication modules that are linked into authdaemond. The +# default list is installed. You may selectively disable modules simply +# by removing them from the following list. The available modules you +# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe + +authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" + +##NAME: authmodulelistorig:3 +# +# This setting is used by Courier's webadmin module, and should be left +# alone + +authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" + +##NAME: daemons:0 +# +# The number of daemon processes that are started. authdaemon is typically +# installed where authentication modules are relatively expensive: such +# as authldap, or authmysql, so it's better to have a number of them running. +# PLEASE NOTE: Some platforms may experience a problem if there's more than +# one daemon. Specifically, SystemV derived platforms that use TLI with +# socket emulation. I'm suspicious of TLI's ability to handle multiple +# processes accepting connections on the same filesystem domain socket. +# +# You may need to increase daemons if as your system load increases. Symptoms +# include sporadic authentication failures. If you start getting +# authentication failures, increase daemons. However, the default of 5 +# SHOULD be sufficient. Bumping up daemon count is only a short-term +# solution. The permanent solution is to add more resources: RAM, faster +# disks, faster CPUs... + +daemons=5 + +##NAME: authdaemonvar:2 +# +# authdaemonvar is here, but is not used directly by authdaemond. It's +# used by various configuration and build scripts, so don't touch it! + +authdaemonvar=/var/lib/courier/authdaemon + +##NAME: DEBUG_LOGIN:0 +# +# Dump additional diagnostics to syslog +# +# DEBUG_LOGIN=0 - turn off debugging +# DEBUG_LOGIN=1 - turn on debugging +# DEBUG_LOGIN=2 - turn on debugging + log passwords too +# +# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. +# +# Note that most information is sent to syslog at level 'debug', so +# you may need to modify your /etc/syslog.conf to be able to see it. + +DEBUG_LOGIN=0 + +##NAME: DEFAULTOPTIONS:0 +# +# A comma-separated list of option=value pairs. Each option is applied +# to an account if the account does not have its own specific value for +# that option. So for example, you can set +# DEFAULTOPTIONS="disablewebmail=1,disableimap=1" +# and then enable webmail and/or imap on individual accounts by setting +# disablewebmail=0 and/or disableimap=0 on the account. + +DEFAULTOPTIONS="" + +##NAME: LOGGEROPTS:0 +# +# courierlogger(1) options, e.g. to set syslog facility +# + +LOGGEROPTS="" + +##NAME: LDAP_TLS_OPTIONS:0 +# +# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. +# Examples: +# +#LDAPTLS_CACERT=/path/to/cacert.pem +#LDAPTLS_REQCERT=demand +#LDAPTLS_CERT=/path/to/clientcert.pem +#LDAPTLS_KEY=/path/to/clientkey.pem diff --git a/config-archive/etc/init.d/postfix b/config-archive/etc/init.d/postfix new file mode 100755 index 00000000..8fad5d9d --- /dev/null +++ b/config-archive/etc/init.d/postfix @@ -0,0 +1,48 @@ +#!/sbin/runscript +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.5,v 1.4 2011/10/24 12:52:32 eras Exp $ + +# If you plan to simultaneously use several Postfix instances, don't forget +# to specify your alternate_config_directories variable in your main main.cf file. +# Then make a symlink from /etc/init.d/postfix to /etc/init.d/postfix.alt, +# prepare your new /etc/postfix.alt environment, and at least change these working paths: +# queue_directory = /var/spool/postfix.alt +# data_directory = /var/lib/postfix.alt + +CONF_DIR="/etc/postfix" +CONF_OPT="${SVCNAME##*.}" +if [ -n ${CONF_OPT} -a ${SVCNAME} != "postfix" ]; then + CONF_DIR="${CONF_DIR}.${CONF_OPT}" +fi + +extra_started_commands="reload" + +depend() { + use logger dns ypbind amavisd mysql antivirus postfix_greylist net saslauthd + if [ "${SVCNAME}" = "postfix" ]; then + provide mta + fi +} + +start() { + ebegin "Starting postfix (${CONF_DIR})" + if [ ! -d ${CONF_DIR} ]; then + eend 1 "${CONF_DIR} does not exist" + return 1 + fi + /usr/sbin/postfix -c ${CONF_DIR} start >/dev/null 2>&1 + eend $? +} + +stop() { + ebegin "Stopping postfix (${CONF_DIR})" + /usr/sbin/postfix -c ${CONF_DIR} stop >/dev/null 2>&1 + eend $? +} + +reload() { + ebegin "Reloading postfix (${CONF_DIR})" + /usr/sbin/postfix -c ${CONF_DIR} reload >/dev/null 2>&1 + eend $? +} diff --git a/config-archive/etc/init.d/postfix.dist b/config-archive/etc/init.d/postfix.dist new file mode 100755 index 00000000..b62bb7ff --- /dev/null +++ b/config-archive/etc/init.d/postfix.dist @@ -0,0 +1,48 @@ +#!/sbin/runscript +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.5,v 1.4 2011/10/24 12:52:32 eras Exp $ + +# If you plan to simultaneously use several Postfix instances, don't forget +# to specify your alternate_config_directories variable in your main main.cf file. +# Then make a symlink from /etc/init.d/postfix to /etc/init.d/postfix.alt, +# prepare your new /etc/postfix.alt environment, and at least change these working paths: +# queue_directory = /var/spool/postfix.alt +# data_directory = /var/lib/postfix.alt + +CONF_DIR="/etc/postfix" +CONF_OPT="${SVCNAME##*.}" +if [ -n ${CONF_OPT} -a ${SVCNAME} != "postfix" ]; then + CONF_DIR="${CONF_DIR}.${CONF_OPT}" +fi + +extra_started_commands="reload" + +depend() { + use logger dns ypbind amavisd mysql postgresql antivirus postfix_greylist net saslauthd + if [ "${SVCNAME}" = "postfix" ]; then + provide mta + fi +} + +start() { + ebegin "Starting postfix (${CONF_DIR})" + if [ ! -d ${CONF_DIR} ]; then + eend 1 "${CONF_DIR} does not exist" + return 1 + fi + /usr/sbin/postfix -c ${CONF_DIR} start >/dev/null 2>&1 + eend $? +} + +stop() { + ebegin "Stopping postfix (${CONF_DIR})" + /usr/sbin/postfix -c ${CONF_DIR} stop >/dev/null 2>&1 + eend $? +} + +reload() { + ebegin "Reloading postfix (${CONF_DIR})" + /usr/sbin/postfix -c ${CONF_DIR} reload >/dev/null 2>&1 + eend $? +} diff --git a/config-archive/etc/postfix/main.cf b/config-archive/etc/postfix/main.cf new file mode 100644 index 00000000..dba4ff00 --- /dev/null +++ b/config-archive/etc/postfix/main.cf @@ -0,0 +1,692 @@ +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/lib64/postfix + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld +myhostname = bruni.home.brehm-online.com + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld +mydomain = home.brehm-online.com + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain +myorigin = brehm-online.com + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost +inet_interfaces = 10.12.11.2, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +mynetworks = 10.12.11.0/24 + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/file/name +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = /usr/share/doc/postfix-2.8.7/html + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /etc/postfix + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.8.7/readme +home_mailbox = .maildir/ + +smtpd_sasl_auth_enable = yes +smtpd_sasl2_auth_enable = yes +smtpd_sasl_security_options = noanonymous +broken_sasl_auth_clients = yes +smtpd_sasl_local_domain = $myhostname + +# Authentifizierter Relay-Mail-Versand +smtp_sasl_auth_enable = yes +smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth +smtp_sasl_security_options = noanonymous +relayhost = [mail.brehm-online.com] +#relayhost = [helga-six.brehm-online.com] + +smtpd_use_tls = yes +#smtpd_tls_auth_only = yes +smtpd_tls_key_file = /etc/postfix/postfix.pem +smtpd_tls_cert_file = /etc/postfix/postfix.pem +#smtpd_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem +smtpd_tls_loglevel = 1 +smtpd_tls_received_header = yes +smtpd_tls_session_cache_timeout = 3600s +tls_random_source = dev:/dev/urandom + +# schön tls verwenden +smtp_use_tls = yes +smtp_tls_key_file = /etc/postfix/postfix.pem +smtp_tls_cert_file = /etc/postfix/postfix.pem +#smtp_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem +# vermurkste zertifikate: egal +smtp_tls_enforce_peername = no + +#debug_peer_list = 217.237.40.156 + +inet_protocols = all diff --git a/config-archive/etc/postfix/main.cf.dist.new b/config-archive/etc/postfix/main.cf.dist.new new file mode 100644 index 00000000..fcc2569d --- /dev/null +++ b/config-archive/etc/postfix/main.cf.dist.new @@ -0,0 +1,652 @@ +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/lib64/postfix + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/file/name +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = /usr/share/doc/postfix-2.8.7/html + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /etc/postfix + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.8.7/readme +home_mailbox = .maildir/ diff --git a/courier/authlib/._cfg0000_authdaemonrc b/courier/authlib/._cfg0000_authdaemonrc deleted file mode 100644 index afd6adf3..00000000 --- a/courier/authlib/._cfg0000_authdaemonrc +++ /dev/null @@ -1,103 +0,0 @@ -##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ -# -# Copyright 2000-2005 Double Precision, Inc. See COPYING for -# distribution information. -# -# authdaemonrc created from authdaemonrc.dist by sysconftool -# -# Do not alter lines that begin with ##, they are used when upgrading -# this configuration. -# -# This file configures authdaemond, the resident authentication daemon. -# -# Comments in this file are ignored. Although this file is intended to -# be sourced as a shell script, authdaemond parses it manually, so -# the acceptable syntax is a bit limited. Multiline variable contents, -# with the \ continuation character, are not allowed. Everything must -# fit on one line. Do not use any additional whitespace for indentation, -# or anything else. - -##NAME: authmodulelist:2 -# -# The authentication modules that are linked into authdaemond. The -# default list is installed. You may selectively disable modules simply -# by removing them from the following list. The available modules you -# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe - -authmodulelist="authmysql " - -##NAME: authmodulelistorig:3 -# -# This setting is used by Courier's webadmin module, and should be left -# alone - -authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" - -##NAME: daemons:0 -# -# The number of daemon processes that are started. authdaemon is typically -# installed where authentication modules are relatively expensive: such -# as authldap, or authmysql, so it's better to have a number of them running. -# PLEASE NOTE: Some platforms may experience a problem if there's more than -# one daemon. Specifically, SystemV derived platforms that use TLI with -# socket emulation. I'm suspicious of TLI's ability to handle multiple -# processes accepting connections on the same filesystem domain socket. -# -# You may need to increase daemons if as your system load increases. Symptoms -# include sporadic authentication failures. If you start getting -# authentication failures, increase daemons. However, the default of 5 -# SHOULD be sufficient. Bumping up daemon count is only a short-term -# solution. The permanent solution is to add more resources: RAM, faster -# disks, faster CPUs... - -daemons=5 - -##NAME: authdaemonvar:2 -# -# authdaemonvar is here, but is not used directly by authdaemond. It's -# used by various configuration and build scripts, so don't touch it! - -authdaemonvar=/var/lib/courier/authdaemon - -##NAME: DEBUG_LOGIN:0 -# -# Dump additional diagnostics to syslog -# -# DEBUG_LOGIN=0 - turn off debugging -# DEBUG_LOGIN=1 - turn on debugging -# DEBUG_LOGIN=2 - turn on debugging + log passwords too -# -# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. -# -# Note that most information is sent to syslog at level 'debug', so -# you may need to modify your /etc/syslog.conf to be able to see it. - -DEBUG_LOGIN=0 - -##NAME: DEFAULTOPTIONS:0 -# -# A comma-separated list of option=value pairs. Each option is applied -# to an account if the account does not have its own specific value for -# that option. So for example, you can set -# DEFAULTOPTIONS="disablewebmail=1,disableimap=1" -# and then enable webmail and/or imap on individual accounts by setting -# disablewebmail=0 and/or disableimap=0 on the account. - -DEFAULTOPTIONS="" - -##NAME: LOGGEROPTS:0 -# -# courierlogger(1) options, e.g. to set syslog facility -# - -LOGGEROPTS="" - -##NAME: LDAP_TLS_OPTIONS:0 -# -# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. -# Examples: -# -#LDAPTLS_CACERT=/path/to/cacert.pem -#LDAPTLS_REQCERT=demand -#LDAPTLS_CERT=/path/to/clientcert.pem -#LDAPTLS_KEY=/path/to/clientkey.pem diff --git a/courier/authlib/._cfg0000_authdaemonrc.dist b/courier/authlib/._cfg0000_authdaemonrc.dist deleted file mode 100644 index b1b26700..00000000 --- a/courier/authlib/._cfg0000_authdaemonrc.dist +++ /dev/null @@ -1,103 +0,0 @@ -##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $ -# -# Copyright 2000-2005 Double Precision, Inc. See COPYING for -# distribution information. -# -# authdaemonrc created from authdaemonrc.dist by sysconftool -# -# Do not alter lines that begin with ##, they are used when upgrading -# this configuration. -# -# This file configures authdaemond, the resident authentication daemon. -# -# Comments in this file are ignored. Although this file is intended to -# be sourced as a shell script, authdaemond parses it manually, so -# the acceptable syntax is a bit limited. Multiline variable contents, -# with the \ continuation character, are not allowed. Everything must -# fit on one line. Do not use any additional whitespace for indentation, -# or anything else. - -##NAME: authmodulelist:2 -# -# The authentication modules that are linked into authdaemond. The -# default list is installed. You may selectively disable modules simply -# by removing them from the following list. The available modules you -# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe - -authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" - -##NAME: authmodulelistorig:3 -# -# This setting is used by Courier's webadmin module, and should be left -# alone - -authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" - -##NAME: daemons:0 -# -# The number of daemon processes that are started. authdaemon is typically -# installed where authentication modules are relatively expensive: such -# as authldap, or authmysql, so it's better to have a number of them running. -# PLEASE NOTE: Some platforms may experience a problem if there's more than -# one daemon. Specifically, SystemV derived platforms that use TLI with -# socket emulation. I'm suspicious of TLI's ability to handle multiple -# processes accepting connections on the same filesystem domain socket. -# -# You may need to increase daemons if as your system load increases. Symptoms -# include sporadic authentication failures. If you start getting -# authentication failures, increase daemons. However, the default of 5 -# SHOULD be sufficient. Bumping up daemon count is only a short-term -# solution. The permanent solution is to add more resources: RAM, faster -# disks, faster CPUs... - -daemons=5 - -##NAME: authdaemonvar:2 -# -# authdaemonvar is here, but is not used directly by authdaemond. It's -# used by various configuration and build scripts, so don't touch it! - -authdaemonvar=/var/lib/courier/authdaemon - -##NAME: DEBUG_LOGIN:0 -# -# Dump additional diagnostics to syslog -# -# DEBUG_LOGIN=0 - turn off debugging -# DEBUG_LOGIN=1 - turn on debugging -# DEBUG_LOGIN=2 - turn on debugging + log passwords too -# -# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog. -# -# Note that most information is sent to syslog at level 'debug', so -# you may need to modify your /etc/syslog.conf to be able to see it. - -DEBUG_LOGIN=0 - -##NAME: DEFAULTOPTIONS:0 -# -# A comma-separated list of option=value pairs. Each option is applied -# to an account if the account does not have its own specific value for -# that option. So for example, you can set -# DEFAULTOPTIONS="disablewebmail=1,disableimap=1" -# and then enable webmail and/or imap on individual accounts by setting -# disablewebmail=0 and/or disableimap=0 on the account. - -DEFAULTOPTIONS="" - -##NAME: LOGGEROPTS:0 -# -# courierlogger(1) options, e.g. to set syslog facility -# - -LOGGEROPTS="" - -##NAME: LDAP_TLS_OPTIONS:0 -# -# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'. -# Examples: -# -#LDAPTLS_CACERT=/path/to/cacert.pem -#LDAPTLS_REQCERT=demand -#LDAPTLS_CERT=/path/to/clientcert.pem -#LDAPTLS_KEY=/path/to/clientkey.pem diff --git a/courier/authlib/authdaemonrc b/courier/authlib/authdaemonrc index 9dba818d..afd6adf3 100644 --- a/courier/authlib/authdaemonrc +++ b/courier/authlib/authdaemonrc @@ -22,7 +22,7 @@ # The authentication modules that are linked into authdaemond. The # default list is installed. You may selectively disable modules simply # by removing them from the following list. The available modules you -# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe +# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe authmodulelist="authmysql " @@ -31,7 +31,7 @@ authmodulelist="authmysql " # This setting is used by Courier's webadmin module, and should be left # alone -authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe" +authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" ##NAME: daemons:0 # diff --git a/courier/authlib/authdaemonrc.dist b/courier/authlib/authdaemonrc.dist index 63cc6b1d..b1b26700 100644 --- a/courier/authlib/authdaemonrc.dist +++ b/courier/authlib/authdaemonrc.dist @@ -22,16 +22,16 @@ # The authentication modules that are linked into authdaemond. The # default list is installed. You may selectively disable modules simply # by removing them from the following list. The available modules you -# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe +# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe -authmodulelist="authuserdb authpam authshadow authldap authmysql authcustom authpipe" +authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" ##NAME: authmodulelistorig:3 # # This setting is used by Courier's webadmin module, and should be left # alone -authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe" +authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe" ##NAME: daemons:0 # diff --git a/init.d/._cfg0000_postfix b/init.d/._cfg0000_postfix deleted file mode 100755 index b62bb7ff..00000000 --- a/init.d/._cfg0000_postfix +++ /dev/null @@ -1,48 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2011 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.5,v 1.4 2011/10/24 12:52:32 eras Exp $ - -# If you plan to simultaneously use several Postfix instances, don't forget -# to specify your alternate_config_directories variable in your main main.cf file. -# Then make a symlink from /etc/init.d/postfix to /etc/init.d/postfix.alt, -# prepare your new /etc/postfix.alt environment, and at least change these working paths: -# queue_directory = /var/spool/postfix.alt -# data_directory = /var/lib/postfix.alt - -CONF_DIR="/etc/postfix" -CONF_OPT="${SVCNAME##*.}" -if [ -n ${CONF_OPT} -a ${SVCNAME} != "postfix" ]; then - CONF_DIR="${CONF_DIR}.${CONF_OPT}" -fi - -extra_started_commands="reload" - -depend() { - use logger dns ypbind amavisd mysql postgresql antivirus postfix_greylist net saslauthd - if [ "${SVCNAME}" = "postfix" ]; then - provide mta - fi -} - -start() { - ebegin "Starting postfix (${CONF_DIR})" - if [ ! -d ${CONF_DIR} ]; then - eend 1 "${CONF_DIR} does not exist" - return 1 - fi - /usr/sbin/postfix -c ${CONF_DIR} start >/dev/null 2>&1 - eend $? -} - -stop() { - ebegin "Stopping postfix (${CONF_DIR})" - /usr/sbin/postfix -c ${CONF_DIR} stop >/dev/null 2>&1 - eend $? -} - -reload() { - ebegin "Reloading postfix (${CONF_DIR})" - /usr/sbin/postfix -c ${CONF_DIR} reload >/dev/null 2>&1 - eend $? -} diff --git a/init.d/postfix b/init.d/postfix index 8fad5d9d..b62bb7ff 100755 --- a/init.d/postfix +++ b/init.d/postfix @@ -19,7 +19,7 @@ fi extra_started_commands="reload" depend() { - use logger dns ypbind amavisd mysql antivirus postfix_greylist net saslauthd + use logger dns ypbind amavisd mysql postgresql antivirus postfix_greylist net saslauthd if [ "${SVCNAME}" = "postfix" ]; then provide mta fi diff --git a/postfix/._cfg0000_main.cf b/postfix/._cfg0000_main.cf deleted file mode 100644 index fcc2569d..00000000 --- a/postfix/._cfg0000_main.cf +++ /dev/null @@ -1,652 +0,0 @@ -# Global Postfix configuration file. This file lists only a subset -# of all parameters. For the syntax, and for a complete parameter -# list, see the postconf(5) manual page (command: "man 5 postconf"). -# -# For common configuration examples, see BASIC_CONFIGURATION_README -# and STANDARD_CONFIGURATION_README. To find these documents, use -# the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. -# -# For best results, change no more than 2-3 parameters at a time, -# and test if Postfix still works after every change. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/lib64/postfix - -# The data_directory parameter specifies the location of Postfix-writable -# data files (caches, random numbers). This directory must be owned -# by the mail_owner account (see below). -# -data_directory = /var/lib/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user@that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user@[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user@[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -#mydestination = $myhostname, localhost.$mydomain, localhost -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user@domain.tld address. -# -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -#mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user@domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -#alias_maps = hash:/etc/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -#alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -#recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /some/where/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/file/name -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/file/name -#fallback_transport = cyrus -#fallback_transport = - -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user@other.host -#luser_relay = $local@other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -#header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - ddd $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# " where uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = /usr/share/doc/postfix-2.8.7/html - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /etc/postfix - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.8.7/readme -home_mailbox = .maildir/