From: Frank Brehm Date: Mon, 18 Jan 2016 18:08:53 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.de/?a=commitdiff_plain;h=4834b573413b876939e91655f83fcf2f0a8b95cb;p=config%2Fsamara%2Fetc.git Current state --- diff --git a/._cfg0000_rc.conf b/._cfg0000_rc.conf deleted file mode 100644 index 9209bc6..0000000 --- a/._cfg0000_rc.conf +++ /dev/null @@ -1,241 +0,0 @@ -# Global OpenRC configuration settings - -# Set to "YES" if you want the rc system to try and start services -# in parallel for a slight speed improvement. When running in parallel we -# prefix the service output with its name as the output will get -# jumbled up. -# WARNING: whilst we have improved parallel, it can still potentially lock -# the boot process. Don't file bugs about this unless you can supply -# patches that fix it without breaking other things! -#rc_parallel="NO" - -# Set rc_interactive to "YES" and you'll be able to press the I key during -# boot so you can choose to start specific services. Set to "NO" to disable -# this feature. This feature is automatically disabled if rc_parallel is -# set to YES. -#rc_interactive="YES" - -# If we need to drop to a shell, you can specify it here. -# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, -# otherwise /bin/sh -# Linux users could specify /sbin/sulogin -rc_shell=/sbin/sulogin - -# Do we allow any started service in the runlevel to satisfy the dependency -# or do we want all of them regardless of state? For example, if net.eth0 -# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" -# both will be started, but services that depend on 'net' will work if either -# one comes up. With rc_depend_strict="YES" we would require them both to -# come up. -#rc_depend_strict="YES" - -# rc_hotplug controls which services we allow to be hotplugged. -# A hotplugged service is one started by a dynamic dev manager when a matching -# hardware device is found. -# Hotplugged services appear in the "hotplugged" runlevel. -# If rc_hotplug is set to any value, we compare the name of this service -# to every pattern in the value, from left to right, and we allow the -# service to be hotplugged if it matches a pattern, or if it matches no -# patterns. Patterns can include shell wildcards. -# To disable services from being hotplugged, prefix patterns with "!". -#If rc_hotplug is not set or is empty, all hotplugging is disabled. -# Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be hotplugged. -# Example - rc_hotplug="!net.*" -# This allows services that do not match "net.*" to be hotplugged. - -# rc_logger launches a logging daemon to log the entire rc process to -# /var/log/rc.log -# NOTE: Linux systems require the devfs service to be started before -# logging can take place and as such cannot log the sysinit runlevel. -#rc_logger="YES" - -# Through rc_log_path you can specify a custom log file. -# The default value is: /var/log/rc.log -#rc_log_path="/var/log/rc.log" - -# If you want verbose output for OpenRC, set this to yes. If you want -# verbose output for service foo only, set it to yes in /etc/conf.d/foo. -#rc_verbose=no - -# By default we filter the environment for our running scripts. To allow other -# variables through, add them here. Use a * to allow all variables through. -#rc_env_allow="VAR1 VAR2" - -# By default we assume that all daemons will start correctly. -# However, some do not - a classic example is that they fork and return 0 AND -# then child barfs on a configuration error. Or the daemon has a bug and the -# child crashes. You can set the number of milliseconds start-stop-daemon -# waits to check that the daemon is still running after starting here. -# The default is 0 - no checking. -#rc_start_wait=100 - -# rc_nostop is a list of services which will not stop when changing runlevels. -# This still allows the service itself to be stopped when called directly. -#rc_nostop="" - -# rc will attempt to start crashed services by default. -# However, it will not stop them by default as that could bring down other -# critical services. -#rc_crashed_stop=NO -#rc_crashed_start=YES - -# Set rc_nocolor to yes if you do not want colors displayed in OpenRC -# output. -#rc_nocolor=NO - -############################################################################## -# MISC CONFIGURATION VARIABLES -# There variables are shared between many init scripts - -# Set unicode to YES to turn on unicode support for keyboards and screens. -unicode="YES" - -# This is how long fuser should wait for a remote server to respond. The -# default is 60 seconds, but it can be adjusted here. -#rc_fuser_timeout=60 - -# Below is the default list of network fstypes. -# -# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs -# nfs nfs4 ocfs2 shfs smbfs -# -# If you would like to add to this list, you can do so by adding your -# own fstypes to the following variable. -#extra_net_fs_list="" - -############################################################################## -# SERVICE CONFIGURATION VARIABLES -# These variables are documented here, but should be configured in -# /etc/conf.d/foo for service foo and NOT enabled here unless you -# really want them to work on a global basis. -# If your service has characters in its name which are not legal in -# shell variable names and you configure the variables for it in this -# file, those characters should be replaced with underscores in the -# variable names as shown below. - -# Some daemons are started and stopped via start-stop-daemon. -# We can set some things on a per service basis, like the nicelevel. -#SSD_NICELEVEL="-19" - -# Pass ulimit parameters -# If you are using bash in POSIX mode for your shell, note that the -# ulimit command uses a block size of 512 bytes for the -c and -f -# options -#rc_ulimit="-u 30" - -# It's possible to define extra dependencies for services like so -#rc_config="/etc/foo" -#rc_need="openvpn" -#rc_use="net.eth0" -#rc_after="clock" -#rc_before="local" -#rc_provide="!net" - -# You can also enable the above commands here for each service. Below is an -# example for service foo. -#rc_foo_config="/etc/foo" -#rc_foo_need="openvpn" -#rc_foo_after="clock" - -# Below is an example for service foo-bar. Note that the '-' is illegal -# in a shell variable name, so we convert it to an underscore. -# example for service foo-bar. -#rc_foo_bar_config="/etc/foo-bar" -#rc_foo_bar_need="openvpn" -#rc_foo_bar_after="clock" - -# You can also remove dependencies. -# This is mainly used for saying which servies do NOT provide net. -#rc_net_tap0_provide="!net" - -############################################################################## -# LINUX SPECIFIC OPTIONS - -# This is the subsystem type. Valid options on Linux: -# "" - nothing special -# "docker" - Docker container manager -# "lxc" - Linux Containers -# "openvz" - Linux OpenVZ -# "prefix" - Prefix -# "rkt" - CoreOS container management system -# "uml" - Usermode Linux -# "vserver" - Linux vserver -# "systemd-nspawn" - Container created by the systemd-nspawn utility -# "xen0" - Xen0 Domain -# "xenU" - XenU Domain -# If this is commented out, automatic detection will be used. -# -# This should be set to the value representing the environment this file is -# PRESENTLY in, not the virtualization the environment is capable of. -#rc_sys="" - -# This is the number of tty's used in most of the rc-scripts (like -# consolefont, numlock, etc ...) -rc_tty_number=12 - -############################################################################## -# CGROUPS RESOURCE MANAGEMENT - -# If you have cgroups turned on in your kernel, this switch controls -# whether or not a group for each controller is mounted under -# /sys/fs/cgroup. -# None of the other options in this section work if this is set to "NO". -#rc_controller_cgroups="YES" - -# The following settings allow you to set up values for the cgroup -# controllers for your services. -# They can be set in this file;, however, if you do this, the settings -# will apply to all of your services. -# If you want different settings for each service, place the settings in -# /etc/conf.d/foo for service foo. -# The format is to specify the names of the settings followed by their -# values. Each variable can hold multiple settings. -# For example, you would use this to set the cpu.shares setting in the -# cpu controller to 512 for your service. -# rc_cgroup_cpu=" -# cpu.shares 512 -# " -# -#For more information about the adjustments that can be made with -#cgroups, see Documentation/cgroups/* in the linux kernel source tree. - -# Set the blkio controller settings for this service. -#rc_cgroup_blkio="" - -# Set the cpu controller settings for this service. -#rc_cgroup_cpu="" - -# Add this service to the cpuacct controller (any value means yes). -#rc_cgroup_cpuacct="" - -# Set the cpuset controller settings for this service. -#rc_cgroup_cpuset="" - -# Set the devices controller settings for this service. -#rc_cgroup_devices="" - -# Set the hugetlb controller settings for this service. -#rc_cgroup_hugetlb="" - -# Set the memory controller settings for this service. -#rc_cgroup_memory="" - -# Set the net_cls controller settings for this service. -#rc_cgroup_net_cls="" - -# Set the net_prio controller settings for this service. -#rc_cgroup_net_prio="" - -# Set the pids controller settings for this service. -#rc_cgroup_pids="" - -# Set this to YES if yu want all of the processes in a service's cgroup -# killed when the service is stopped or restarted. -# This should not be set globally because it kills all of the service's -# child processes, and most of the time this is undesirable. Please set -# it in /etc/conf.d/. -# To perform this cleanup manually for a stopped service, you can -# execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or -# rc-service cgroup_cleanup. -# rc_cgroup_cleanup="NO" diff --git a/config-archive/etc/default/grub b/config-archive/etc/default/grub index 0a40ed1..7bebbf6 100644 --- a/config-archive/etc/default/grub +++ b/config-archive/etc/default/grub @@ -1,6 +1,6 @@ -# Copyright 1999-2014 Gentoo Foundation +# Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.4 2014/10/16 04:04:02 floppym Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.5 2015/03/25 01:58:00 floppym Exp $ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: @@ -63,3 +63,14 @@ GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY=true + +# Uncomment to disable generation of the submenu and put all choices on +# the top-level menu. +# Besides the visual affect of no sub menu, this makes navigation of the +# menu easier for a user who can't see the screen. +#GRUB_DISABLE_SUBMENU=y + +# Uncomment to play a tone when the main menu is displayed. +# This is useful, for example, to allow users who can't see the screen +# to know when they can make a choice on the menu. +#GRUB_INIT_TUNE="60 800 1" diff --git a/config-archive/etc/default/grub.1 b/config-archive/etc/default/grub.1 index f5c29fe..0a40ed1 100644 --- a/config-archive/etc/default/grub.1 +++ b/config-archive/etc/default/grub.1 @@ -1,23 +1,34 @@ -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-2,v 1.4 2013/09/21 18:10:55 floppym Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.4 2014/10/16 04:04:02 floppym Exp $ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: # 'grub2-mkconfig -o /boot/grub/grub.cfg' # # See the grub info page for documentation on possible variables and -# their associated values. +# their associated values. GRUB_DISTRIBUTOR="Samara (Gentoo)" -GRUB_DEFAULT=0 -GRUB_HIDDEN_TIMEOUT=5 -GRUB_HIDDEN_TIMEOUT_QUIET=true +# Default menu entry +#GRUB_DEFAULT=0 + +# Boot the default entry this many seconds after the menu is displayed +#GRUB_TIMEOUT=5 GRUB_TIMEOUT=10 +#GRUB_TIMEOUT_STYLE=menu # Append parameters to the linux kernel command line -#GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" +#GRUB_CMDLINE_LINUX="" +# +# Examples: +# +# Boot with network interface renaming disabled +# GRUB_CMDLINE_LINUX="net.ifnames=0" +# +# Boot with systemd instead of sysvinit (openrc) +# GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" # Append parameters to the linux kernel command line for non-recovery entries #GRUB_CMDLINE_LINUX_DEFAULT="" @@ -28,8 +39,16 @@ GRUB_TIMEOUT=10 # The resolution used on graphical terminal. # Note that you can use only modes which your graphic card supports via VBE. # You can see them in real GRUB with the command `vbeinfo'. +#GRUB_GFXMODE=640x480 GRUB_GFXMODE=800x600 +# Set to 'text' to force the Linux kernel to boot in normal text +# mode, 'keep' to preserve the graphics mode set using +# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular +# graphics mode, or a sequence of these separated by commas or +# semicolons to try several modes in sequence. +#GRUB_GFXPAYLOAD_LINUX= + # Path to theme spec txt file. # The starfield is by default provided with use truetype. # NOTE: when enabling custom theme, ensure you have required font/etc. diff --git a/config-archive/etc/default/grub.2 b/config-archive/etc/default/grub.2 new file mode 100644 index 0000000..f5c29fe --- /dev/null +++ b/config-archive/etc/default/grub.2 @@ -0,0 +1,46 @@ +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-2,v 1.4 2013/09/21 18:10:55 floppym Exp $ +# +# To populate all changes in this file you need to regenerate your +# grub configuration file afterwards: +# 'grub2-mkconfig -o /boot/grub/grub.cfg' +# +# See the grub info page for documentation on possible variables and +# their associated values. + +GRUB_DISTRIBUTOR="Samara (Gentoo)" + +GRUB_DEFAULT=0 +GRUB_HIDDEN_TIMEOUT=5 +GRUB_HIDDEN_TIMEOUT_QUIET=true +GRUB_TIMEOUT=10 + +# Append parameters to the linux kernel command line +#GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" + +# Append parameters to the linux kernel command line for non-recovery entries +#GRUB_CMDLINE_LINUX_DEFAULT="" + +# Uncomment to disable graphical terminal (grub-pc only) +#GRUB_TERMINAL=console + +# The resolution used on graphical terminal. +# Note that you can use only modes which your graphic card supports via VBE. +# You can see them in real GRUB with the command `vbeinfo'. +GRUB_GFXMODE=800x600 + +# Path to theme spec txt file. +# The starfield is by default provided with use truetype. +# NOTE: when enabling custom theme, ensure you have required font/etc. +#GRUB_THEME="/boot/grub/themes/starfield/theme.txt" + +# Background image used on graphical terminal. +# Can be in various bitmap formats. +#GRUB_BACKGROUND="/boot/grub/mybackground.png" + +# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel +GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +#GRUB_DISABLE_RECOVERY=true diff --git a/config-archive/etc/default/grub.dist b/config-archive/etc/default/grub.dist index 8ff053f..35ab767 100644 --- a/config-archive/etc/default/grub.dist +++ b/config-archive/etc/default/grub.dist @@ -1,6 +1,6 @@ # Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.5 2015/03/25 01:58:00 floppym Exp $ +# $Id$ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: diff --git a/config-archive/etc/rc.conf b/config-archive/etc/rc.conf index 194d5ea..25806bb 100644 --- a/config-archive/etc/rc.conf +++ b/config-archive/etc/rc.conf @@ -211,12 +211,21 @@ rc_tty_number=12 # Set the devices controller settings for this service. #rc_cgroup_devices="" +# Set the hugetlb controller settings for this service. +#rc_cgroup_hugetlb="" + # Set the memory controller settings for this service. #rc_cgroup_memory="" +# Set the net_cls controller settings for this service. +#rc_cgroup_net_cls="" + # Set the net_prio controller settings for this service. #rc_cgroup_net_prio="" +# Set the pids controller settings for this service. +#rc_cgroup_pids="" + # Set this to YES if yu want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's diff --git a/config-archive/etc/rc.conf.1 b/config-archive/etc/rc.conf.1 index a4e155f..194d5ea 100644 --- a/config-archive/etc/rc.conf.1 +++ b/config-archive/etc/rc.conf.1 @@ -117,6 +117,9 @@ unicode="YES" #SSD_NICELEVEL="-19" # Pass ulimit parameters +# If you are using bash in POSIX mode for your shell, note that the +# ulimit command uses a block size of 512 bytes for the -c and -f +# options #rc_ulimit="-u 30" # It's possible to define extra dependencies for services like so @@ -148,14 +151,15 @@ unicode="YES" # LINUX SPECIFIC OPTIONS # This is the subsystem type. Valid options on Linux: -# "" - nothing special -# "lxc" - Linux Containers -# "openvz" - Linux OpenVZ -# "prefix" - Prefix -# "uml" - Usermode Linux -# "vserver" - Linux vserver -# "xen0" - Xen0 Domain -# "xenU" - XenU Domain +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "systemd-nspawn" - Container created by the systemd-nspawn utility +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain # If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is diff --git a/config-archive/etc/rc.conf.2 b/config-archive/etc/rc.conf.2 index fba55d3..a4e155f 100644 --- a/config-archive/etc/rc.conf.2 +++ b/config-archive/etc/rc.conf.2 @@ -52,6 +52,10 @@ rc_logger="YES" # The default value is: /var/log/rc.log rc_log_path="/var/log/rc.log" +# If you want verbose output for OpenRC, set this to yes. If you want +# verbose output for service foo only, set it to yes in /etc/conf.d/foo. +#rc_verbose=no + # By default we filter the environment for our running scripts. To allow other # variables through, add them here. Use a * to allow all variables through. #rc_env_allow="VAR1 VAR2" @@ -74,6 +78,10 @@ rc_log_path="/var/log/rc.log" #rc_crashed_stop=NO #rc_crashed_start=YES +# Set rc_nocolor to yes if you do not want colors displayed in OpenRC +# output. +#rc_nocolor=NO + ############################################################################## # MISC CONFIGURATION VARIABLES # There variables are shared between many init scripts @@ -87,7 +95,7 @@ unicode="YES" # Below is the default list of network fstypes. # -# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs # nfs nfs4 ocfs2 shfs smbfs # # If you would like to add to this list, you can do so by adding your diff --git a/config-archive/etc/rc.conf.3 b/config-archive/etc/rc.conf.3 index b1b3448..fba55d3 100644 --- a/config-archive/etc/rc.conf.3 +++ b/config-archive/etc/rc.conf.3 @@ -81,6 +81,10 @@ rc_log_path="/var/log/rc.log" # Set unicode to YES to turn on unicode support for keyboards and screens. unicode="YES" +# This is how long fuser should wait for a remote server to respond. The +# default is 60 seconds, but it can be adjusted here. +#rc_fuser_timeout=60 + # Below is the default list of network fstypes. # # afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs @@ -102,7 +106,7 @@ unicode="YES" # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. -#export SSD_NICELEVEL="-19" +#SSD_NICELEVEL="-19" # Pass ulimit parameters #rc_ulimit="-u 30" @@ -154,10 +158,59 @@ unicode="YES" # consolefont, numlock, etc ...) rc_tty_number=12 +############################################################################## +# CGROUPS RESOURCE MANAGEMENT + # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under # /sys/fs/cgroup. -# Support for process management by cgroups is planned in the future, -# so if you turn this off, be aware that you may not be able to use that -# feature. +# None of the other options in this section work if this is set to "NO". #rc_controller_cgroups="YES" + +# The following settings allow you to set up values for the cgroup +# controllers for your services. +# They can be set in this file;, however, if you do this, the settings +# will apply to all of your services. +# If you want different settings for each service, place the settings in +# /etc/conf.d/foo for service foo. +# The format is to specify the names of the settings followed by their +# values. Each variable can hold multiple settings. +# For example, you would use this to set the cpu.shares setting in the +# cpu controller to 512 for your service. +# rc_cgroup_cpu=" +# cpu.shares 512 +# " +# +#For more information about the adjustments that can be made with +#cgroups, see Documentation/cgroups/* in the linux kernel source tree. + +# Set the blkio controller settings for this service. +#rc_cgroup_blkio="" + +# Set the cpu controller settings for this service. +#rc_cgroup_cpu="" + +# Add this service to the cpuacct controller (any value means yes). +#rc_cgroup_cpuacct="" + +# Set the cpuset controller settings for this service. +#rc_cgroup_cpuset="" + +# Set the devices controller settings for this service. +#rc_cgroup_devices="" + +# Set the memory controller settings for this service. +#rc_cgroup_memory="" + +# Set the net_prio controller settings for this service. +#rc_cgroup_net_prio="" + +# Set this to YES if yu want all of the processes in a service's cgroup +# killed when the service is stopped or restarted. +# This should not be set globally because it kills all of the service's +# child processes, and most of the time this is undesirable. Please set +# it in /etc/conf.d/. +# To perform this cleanup manually for a stopped service, you can +# execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or +# rc-service cgroup_cleanup. +# rc_cgroup_cleanup="NO" diff --git a/config-archive/etc/rc.conf.4 b/config-archive/etc/rc.conf.4 new file mode 100644 index 0000000..b1b3448 --- /dev/null +++ b/config-archive/etc/rc.conf.4 @@ -0,0 +1,163 @@ +# Global OpenRC configuration settings + +# Set to "YES" if you want the rc system to try and start services +# in parallel for a slight speed improvement. When running in parallel we +# prefix the service output with its name as the output will get +# jumbled up. +# WARNING: whilst we have improved parallel, it can still potentially lock +# the boot process. Don't file bugs about this unless you can supply +# patches that fix it without breaking other things! +#rc_parallel="NO" +rc_parallel="YES" + +# Set rc_interactive to "YES" and you'll be able to press the I key during +# boot so you can choose to start specific services. Set to "NO" to disable +# this feature. This feature is automatically disabled if rc_parallel is +# set to YES. +#rc_interactive="YES" + +# If we need to drop to a shell, you can specify it here. +# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, +# otherwise /bin/sh +# Linux users could specify /sbin/sulogin +rc_shell=/sbin/sulogin + +# Do we allow any started service in the runlevel to satisfy the dependency +# or do we want all of them regardless of state? For example, if net.eth0 +# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" +# both will be started, but services that depend on 'net' will work if either +# one comes up. With rc_depend_strict="YES" we would require them both to +# come up. +#rc_depend_strict="YES" + +# rc_hotplug is a list of services that we allow to be hotplugged. +# By default we do not allow hotplugging. +# A hotplugged service is one started by a dynamic dev manager when a matching +# hardware device is found. +# This service is intrinsically included in the boot runlevel. +# To disable services, prefix with a ! +# Example - rc_hotplug="net.wlan !net.*" +# This allows net.wlan and any service not matching net.* to be plugged. +# Example - rc_hotplug="*" +# This allows all services to be hotplugged +#rc_hotplug="*" + +# rc_logger launches a logging daemon to log the entire rc process to +# /var/log/rc.log +# NOTE: Linux systems require the devfs service to be started before +# logging can take place and as such cannot log the sysinit runlevel. +rc_logger="YES" + +# Through rc_log_path you can specify a custom log file. +# The default value is: /var/log/rc.log +rc_log_path="/var/log/rc.log" + +# By default we filter the environment for our running scripts. To allow other +# variables through, add them here. Use a * to allow all variables through. +#rc_env_allow="VAR1 VAR2" + +# By default we assume that all daemons will start correctly. +# However, some do not - a classic example is that they fork and return 0 AND +# then child barfs on a configuration error. Or the daemon has a bug and the +# child crashes. You can set the number of milliseconds start-stop-daemon +# waits to check that the daemon is still running after starting here. +# The default is 0 - no checking. +#rc_start_wait=100 + +# rc_nostop is a list of services which will not stop when changing runlevels. +# This still allows the service itself to be stopped when called directly. +#rc_nostop="" + +# rc will attempt to start crashed services by default. +# However, it will not stop them by default as that could bring down other +# critical services. +#rc_crashed_stop=NO +#rc_crashed_start=YES + +############################################################################## +# MISC CONFIGURATION VARIABLES +# There variables are shared between many init scripts + +# Set unicode to YES to turn on unicode support for keyboards and screens. +unicode="YES" + +# Below is the default list of network fstypes. +# +# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# nfs nfs4 ocfs2 shfs smbfs +# +# If you would like to add to this list, you can do so by adding your +# own fstypes to the following variable. +#extra_net_fs_list="" + +############################################################################## +# SERVICE CONFIGURATION VARIABLES +# These variables are documented here, but should be configured in +# /etc/conf.d/foo for service foo and NOT enabled here unless you +# really want them to work on a global basis. +# If your service has characters in its name which are not legal in +# shell variable names and you configure the variables for it in this +# file, those characters should be replaced with underscores in the +# variable names as shown below. + +# Some daemons are started and stopped via start-stop-daemon. +# We can set some things on a per service basis, like the nicelevel. +#export SSD_NICELEVEL="-19" + +# Pass ulimit parameters +#rc_ulimit="-u 30" + +# It's possible to define extra dependencies for services like so +#rc_config="/etc/foo" +#rc_need="openvpn" +#rc_use="net.eth0" +#rc_after="clock" +#rc_before="local" +#rc_provide="!net" + +# You can also enable the above commands here for each service. Below is an +# example for service foo. +#rc_foo_config="/etc/foo" +#rc_foo_need="openvpn" +#rc_foo_after="clock" + +# Below is an example for service foo-bar. Note that the '-' is illegal +# in a shell variable name, so we convert it to an underscore. +# example for service foo-bar. +#rc_foo_bar_config="/etc/foo-bar" +#rc_foo_bar_need="openvpn" +#rc_foo_bar_after="clock" + +# You can also remove dependencies. +# This is mainly used for saying which servies do NOT provide net. +#rc_net_tap0_provide="!net" + +############################################################################## +# LINUX SPECIFIC OPTIONS + +# This is the subsystem type. Valid options on Linux: +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain +# If this is commented out, automatic detection will be used. +# +# This should be set to the value representing the environment this file is +# PRESENTLY in, not the virtualization the environment is capable of. +#rc_sys="" + +# This is the number of tty's used in most of the rc-scripts (like +# consolefont, numlock, etc ...) +rc_tty_number=12 + +# If you have cgroups turned on in your kernel, this switch controls +# whether or not a group for each controller is mounted under +# /sys/fs/cgroup. +# Support for process management by cgroups is planned in the future, +# so if you turn this off, be aware that you may not be able to use that +# feature. +#rc_controller_cgroups="YES" diff --git a/config-archive/etc/rc.conf.dist b/config-archive/etc/rc.conf.dist index 8eb5286..9209bc6 100644 --- a/config-archive/etc/rc.conf.dist +++ b/config-archive/etc/rc.conf.dist @@ -29,17 +29,20 @@ rc_shell=/sbin/sulogin # come up. #rc_depend_strict="YES" -# rc_hotplug is a list of services that we allow to be hotplugged. -# By default we do not allow hotplugging. +# rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. -# This service is intrinsically included in the boot runlevel. -# To disable services, prefix with a ! +# Hotplugged services appear in the "hotplugged" runlevel. +# If rc_hotplug is set to any value, we compare the name of this service +# to every pattern in the value, from left to right, and we allow the +# service to be hotplugged if it matches a pattern, or if it matches no +# patterns. Patterns can include shell wildcards. +# To disable services from being hotplugged, prefix patterns with "!". +#If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be plugged. -# Example - rc_hotplug="*" -# This allows all services to be hotplugged -#rc_hotplug="*" +# This allows net.wlan and any service not matching net.* to be hotplugged. +# Example - rc_hotplug="!net.*" +# This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log @@ -151,9 +154,11 @@ unicode="YES" # This is the subsystem type. Valid options on Linux: # "" - nothing special +# "docker" - Docker container manager # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix +# "rkt" - CoreOS container management system # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility diff --git a/default/._cfg0000_grub b/default/._cfg0000_grub deleted file mode 100644 index 35ab767..0000000 --- a/default/._cfg0000_grub +++ /dev/null @@ -1,74 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ -# -# To populate all changes in this file you need to regenerate your -# grub configuration file afterwards: -# 'grub2-mkconfig -o /boot/grub/grub.cfg' -# -# See the grub info page for documentation on possible variables and -# their associated values. - -GRUB_DISTRIBUTOR="Gentoo" - -# Default menu entry -#GRUB_DEFAULT=0 - -# Boot the default entry this many seconds after the menu is displayed -#GRUB_TIMEOUT=5 -#GRUB_TIMEOUT_STYLE=menu - -# Append parameters to the linux kernel command line -#GRUB_CMDLINE_LINUX="" -# -# Examples: -# -# Boot with network interface renaming disabled -# GRUB_CMDLINE_LINUX="net.ifnames=0" -# -# Boot with systemd instead of sysvinit (openrc) -# GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" - -# Append parameters to the linux kernel command line for non-recovery entries -#GRUB_CMDLINE_LINUX_DEFAULT="" - -# Uncomment to disable graphical terminal (grub-pc only) -#GRUB_TERMINAL=console - -# The resolution used on graphical terminal. -# Note that you can use only modes which your graphic card supports via VBE. -# You can see them in real GRUB with the command `vbeinfo'. -#GRUB_GFXMODE=640x480 - -# Set to 'text' to force the Linux kernel to boot in normal text -# mode, 'keep' to preserve the graphics mode set using -# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular -# graphics mode, or a sequence of these separated by commas or -# semicolons to try several modes in sequence. -#GRUB_GFXPAYLOAD_LINUX= - -# Path to theme spec txt file. -# The starfield is by default provided with use truetype. -# NOTE: when enabling custom theme, ensure you have required font/etc. -#GRUB_THEME="/boot/grub/themes/starfield/theme.txt" - -# Background image used on graphical terminal. -# Can be in various bitmap formats. -#GRUB_BACKGROUND="/boot/grub/mybackground.png" - -# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel -#GRUB_DISABLE_LINUX_UUID=true - -# Uncomment to disable generation of recovery mode menu entries -#GRUB_DISABLE_RECOVERY=true - -# Uncomment to disable generation of the submenu and put all choices on -# the top-level menu. -# Besides the visual affect of no sub menu, this makes navigation of the -# menu easier for a user who can't see the screen. -#GRUB_DISABLE_SUBMENU=y - -# Uncomment to play a tone when the main menu is displayed. -# This is useful, for example, to allow users who can't see the screen -# to know when they can make a choice on the menu. -#GRUB_INIT_TUNE="60 800 1" diff --git a/default/grub b/default/grub index 7bebbf6..ffe355c 100644 --- a/default/grub +++ b/default/grub @@ -1,6 +1,6 @@ # Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.5 2015/03/25 01:58:00 floppym Exp $ +# $Id$ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: diff --git a/rc.conf b/rc.conf index 25806bb..a565586 100644 --- a/rc.conf +++ b/rc.conf @@ -30,17 +30,20 @@ rc_shell=/sbin/sulogin # come up. #rc_depend_strict="YES" -# rc_hotplug is a list of services that we allow to be hotplugged. -# By default we do not allow hotplugging. +# rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. -# This service is intrinsically included in the boot runlevel. -# To disable services, prefix with a ! +# Hotplugged services appear in the "hotplugged" runlevel. +# If rc_hotplug is set to any value, we compare the name of this service +# to every pattern in the value, from left to right, and we allow the +# service to be hotplugged if it matches a pattern, or if it matches no +# patterns. Patterns can include shell wildcards. +# To disable services from being hotplugged, prefix patterns with "!". +#If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be plugged. -# Example - rc_hotplug="*" -# This allows all services to be hotplugged -#rc_hotplug="*" +# This allows net.wlan and any service not matching net.* to be hotplugged. +# Example - rc_hotplug="!net.*" +# This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log @@ -152,9 +155,11 @@ unicode="YES" # This is the subsystem type. Valid options on Linux: # "" - nothing special +# "docker" - Docker container manager # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix +# "rkt" - CoreOS container management system # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility