!
-! @OPENGROUP_COPYRIGHT@
-! COPYRIGHT NOTICE
-! Copyright (c) 1990, 1991, 1992, 1993 Open Software Foundation, Inc.
-! Copyright (c) 1996, 1997, 1998, 1999, 2000 The Open Group
-! ALL RIGHTS RESERVED (MOTIF). See the file named COPYRIGHT.MOTIF for
-! the full copyright text.
-!
-! This software is subject to an open license. It may only be
-! used on, with or for operating systems which are themselves open
-! source systems. You must contact The Open Group for a license
-! allowing distribution and sublicensing of this software on, with,
-! or for operating systems which are not Open Source programs.
-!
-! See http://www.opengroup.org/openmotif/license for full
-! details of the license agreement. Any use, reproduction, or
-! distribution of the program constitutes recipient's acceptance of
-! this agreement.
-!
-! EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS
-! PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-! KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY
-! WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY
-! OR FITNESS FOR A PARTICULAR PURPOSE
-!
-! EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT
-! NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT,
-! INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-! DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED
-! AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-! LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-! ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE
-! EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE
-! POSSIBILITY OF SUCH DAMAGES.
+! Motif
+!
+! Copyright (c) 1987-2012, The Open Group. All rights reserved.
+!
+! These libraries and programs are free software; you can
+! redistribute them and/or modify them under the terms of the GNU
+! Lesser General Public License as published by the Free Software
+! Foundation; either version 2 of the License, or (at your option)
+! any later version.
+!
+! These libraries and programs are distributed in the hope that
+! they will be useful, but WITHOUT ANY WARRANTY; without even the
+! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+! PURPOSE. See the GNU Lesser General Public License for more
+! details.
+!
+! You should have received a copy of the GNU Lesser General Public
+! License along with these librararies and programs; if not, write
+! to the Free Software Foundation, Inc., 51 Franklin Street, Fifth
+! Floor, Boston, MA 02110-1301 USA
!
! $XConsortium: system.mwmrc /main/9 1996/10/25 11:45:42 drk $
!
+# The consolefont service is not activated by default. If you need to
+# use it, you should run "rc-update add consolefont boot" as root.
+#
# consolefont specifies the default font that you'd like Linux to use on the
# console. You can find a good selection of fonts in /usr/share/consolefonts;
# you shouldn't specify the trailing ".psf.gz", just the font name below.
# To use the default console font, comment out the CONSOLEFONT setting below.
-# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont boot" as root).
consolefont="default8x16"
# consoletranslation is the charset map file to use. Leave commented to use
# Sets the level at which logging of messages is done to the
-# console. See dmesg(8) for more info.
+# console. See dmesg(1) for more info.
dmesg_level="1"
--- /dev/null
+# $Id: sample-hsqldb.cfg,v 1.15 2005/07/23 19:54:17 unsaved Exp $
+
+# Sample configuration file for HSQLDB database server.
+# See the "UNIX Quick Start" chapter of the Hsqldb User Guide.
+
+# N.b.!!!! You must place this in the right location for your type of UNIX.
+# See the init script "hsqldb" to see where this must be placed and
+# what it should be renamed to.
+
+# This file is "sourced" by a Bourne shell, so use Bourne shell syntax.
+
+# This file WILL NOT WORK until you set (at least) the non-commented
+# variables to the appropriate values for your system.
+# Life will be easier if you avoid all filepaths with spaces or any other
+# funny characters. Don't ask for support if you ignore this advice.
+
+# Thanks to Meikel Bisping for his contributions. -- Blaine
+
+JAVA_EXECUTABLE=/usr/bin/java
+
+# Unless you copied a hsqldb.jar file from another system, this typically
+# resides at $HSQLDB_HOME/lib/hsqldb.jar, where $HSQLDB_HOME is your HSQLDB
+# software base directory.
+HSQLDB_JAR_PATH=/usr/share/hsqldb/lib/hsqldb.jar
+
+# Where the file "server.properties" resides.
+SERVER_HOME=/var/lib/hsqldb
+
+# What UNIX user the server will run as.
+# (The shutdown client is always run as root or the invoker of the init script).
+# Runs as root by default, but you should take the time to set database file
+# ownerships to another user and set that user name here.
+HSQLDB_OWNER=hsqldb
+
+# The HSQLDB jar file specified in HSQLDB_JAR_PATH above will automatically
+# be in the class path. This arg specifies additional classpath elements.
+# To embed your own application, add your jar file(s) or class base
+# directories here, and add your main class to the INVOC_ADDL_ARGS setting
+# below.
+#SERVER_ADDL_CLASSPATH=/usr/local/dist/currencybank.jar
+
+# We require all Server/WebServer instances to be accessible within
+# $MAX_START_SECS from when the Server/WebServer is started.
+# Defaults to 60.
+# Raise this is you are running lots of DB instances or have a slow server.
+#MAX_START_SECS=200
+
+# Time to allow for JVM to die after all HSQLDB instances stopped.
+# Defaults to 1.
+#MAX_TERMINATE_SECS=0
+
+# These are "urlid" values from a SqlTool authentication file
+# ** IN ADDITION TO THOSE IN YOUR server.properties OR webserver.properties **
+# file. All server.urlid.X values from your properties file will automatically
+# be started/stopped/tested. $SHUTDOWN_URLIDS is for additional urlids which
+# will stopped. (Therefore, most users will not set this at all).
+# Separate multiple values with white space. NO OTHER SPECIAL CHARACTERS!
+# Make sure to quote the entire value if it contains white space separator(s).
+# Defaults to none (i.e., only urlids set in properties file will be stopped).
+#SHUTDOWN_URLIDS='sa mygms'
+
+# SqlTool authentication file used only for shutdown.
+# The default value will be sqltool.rc in root's home directory, since it is
+# root who runs the init script.
+# (See the SqlTool chapter of the HSQLDB User Guide if you don't understand
+# this).
+AUTH_FILE=${SERVER_HOME}/sqltool.rc
+
+# Set this to either 'WebServer' or 'Server'. Defaults to Server.
+# The JVM that is started can invoke many classes (see the following item
+# about that), but this is the Server that is used (1) to check status,
+# (2) to shut down the JVM, (3) to get urlids for #1 from the
+# server's server/webserver.properties file.
+#TARGET_CLASS=WebServer
+# Note that you don't specify the org.hsqldb package, since you have no
+# choice in the matter (you can only run org.hsqldb.Server or
+# org.hsqldb.WebServer). If you specify additional classes with
+# INVOC_ADDL_ARGS (described next), you do need to specify the
+# full class name with package name.
+
+# This is where you specify exactly what your HSQLDB JVM will run.
+# The class org.hsqldb.util.MainInvoker will run the TARGET_CLASS
+# specified above with any arguments supplied here + any other classes
+# and arguments. Every additional class (in addition to the TARGET_CLASS)
+# must be preceded with an empty string, so that MainInvoker will know
+# you are giving a class name. MainInvoker will invoke the normal
+# static main(String[]) method of each such class.
+# By default, MainInvoker will just run TARGET_CLASS with no args.
+# Example that runs just the TARGET_CLASS with the specified arguments:
+#INVOC_ADDL_ARGS='-silent false'
+# Example that runs the TARGET_CLASS plus a WebServer:
+#INVOC_ADDL_ARGS='"" org.hsqldb.WebServer'
+# Note the empty string preceding the class name.
+# Example that starts TARGET_CLASS with an argument + a WebServer +
+# your own application with its args (i.e., the HSQLDB Servers are
+# "embedded" in your application). (Set SERVER_ADDL_CLASSPATH too).:
+#INVOC_ADDL_ARGS='-silent false "" org.hsqldb.WebServer "" com.acme.Stone --env prod localhost'
+# Example to run a non-TLS server in same JVM with a TLS server. In this
+# case, TARGET_CLASS is Server which will run in TLS mode by virtue of
+# setting TLS_KEYSTORE and TLS_PASSWORD above. The "additional" Server
+# here overrides the 'tls' and 'port' settings:
+#INVOC_ADDL_ARGS="'' org.hsqldb.Server -port 9002 -tls false"
+# Note that you use nested quotes to group arguments and to specify the
+# empty-string delimiter.
+
+# For TLS encryption for your Server, set these two variables.
+# N.b.: If you set these, then make this file unreadable to non-root users!!!!
+# See the TLS chapter of the HSQLDB User Guide, paying attention to the
+# security warning(s).
+# If you are running with a private server cert, then you will also need to
+# set "truststore" in the your SqlTool config file (location is set by the
+# AUTH_FILE variable in this file, or it must be at the default location for
+# HSQLDB_OWNER).
+#TLS_KEYSTORE=/path/to/jks/server.store
+#TLS_PASSWORD=password
+
+# Any JVM args for the invocation of the JDBC client used to verify DB
+# instances and to shut them down (SqlToolSprayer).
+# This example specifies the location of a private trust store for TLS
+# encryption.
+# For multiple args, put quotes around entire value.
+#CLIENT_JVMARGS=-Djavax.net.debug=ssl
+
+# Any JVM args for the server.
+# For multiple args, put quotes around entire value.
+#SERVER_JVMARGS=-Xmx512m
# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time). If that clock is set to the local time, then
-# set CLOCK to "local". Note that if you dual boot with Windows, then
+# Greenwich Mean Time). If that clock is set to the local time, then
+# set CLOCK to "local". Note that if you dual boot with Windows, then
# you should set it to "local".
clock="UTC"
-# If you want to set the Hardware Clock to the current System Time
-# (software clock) during shutdown, then say "YES" here.
-# You normally don't need to do this if you run a ntp daemon.
+# If you want the hwclock script to set the system time (software clock)
+# to match the current hardware clock during bootup, leave this
+# commented out.
+# However, you can set this to "NO" ifyou are running a modern kernel
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+clock_hctosys="YES"
+
+# If you do not want to set the hardware clock to the current system
+# time (software clock) during shutdown, set this to no.
clock_systohc="YES"
-# If you want to set the system time to the current hardware clock
-# during bootup, then say "YES" here. You do not need this if you are
-# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
-# Also, be aware that if you set this to "NO", the system time will
-# never be saved to the hardware clock unless you set
-# clock_systohc="YES" above.
-clock_hctosys="YES"
-
# If you wish to pass any other arguments to hwclock during bootup,
# you may do so here. Alpha users may wish to use --arc or --srm here.
clock_args=""
# Save state on stopping iptables
SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
# Save state on stopping iptables
SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
extended_keymaps=""
#extended_keymaps="backspace keypad euro2"
-# Tell dumpkeys(1) to interpret character action codes to be
+# Tell dumpkeys(1) to interpret character action codes to be
# from the specified character set.
# This only matters if you set unicode="yes" in /etc/rc.conf.
# For a list of valid sets, run `dumpkeys --help`
--- /dev/null
+# Depending on how mounting your network file systems behaves when your
+# network interfaces are down, you may need to set the netmount script to
+# require specific network interfaces to be active. This file gives
+# examples of how to do this:
+#
+# If you are using newnet and configuring the interface with a static
+# address with the network script:
+# rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need:
+#
+# rc_need="net.eth0"
+# rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd, etc, you should list that tool here.
+#
+# rc_need="networkmanager"
+# rc_need="dhcpcd"
+++ /dev/null
-# Which port and socket to bind PostgreSQL
-PGPORT="5432"
-
-# How long to wait for server to start in seconds
-START_TIMEOUT=10
-
-# NICE_QUIT ignores new connections and wait for clients to disconnect from
-# server before shutting down. NICE_TIMEOUT in seconds determines how long to
-# wait for this to succeed.
-NICE_TIMEOUT=60
-
-# Forecfully disconnect clients from server and shut down. This is performed
-# after NICE_QUIT. Terminated client connections have their open transactions
-# rolled back.
-# Set RUDE_QUIT to "NO" to disable. RUDE_TIMEOUT in seconds.
-RUDE_QUIT="YES"
-RUDE_TIMEOUT=30
-
-# If the server still fails to shutdown, you can force it to quit by setting
-# this to YES and a recover-run will execute on the next startup.
-# Set FORCE_QUIT to "YES" to enable. FORCE_TIMEOUT in seconds.
-FORCE_QUIT="NO"
-FORCE_TIMEOUT=2
-
-# Extra options to run postmaster with, e.g.:
-# -N is the maximal number of client connections
-# -B is the number of shared buffers and has to be at least 2x the value for -N
-# Please read the man-page to postmaster for more options. Many of these
-# options can be set directly in the configuration file.
-#PGOPTS="-N 512 -B 1024"
-
-# Pass extra environment variables. If you have to export environment variables
-# for the database process, this can be done here.
-# Don't forget to escape quotes.
-#PG_EXTRA_ENV="PGPASSFILE=\"/path/to/.pgpass\""
-
-##############################################################################
-#
-# The following values should not be arbitrarily changed.
-#
-# `emerge --config dev-db/postgresql-server:9.1' uses these values to
-# determine where to create the data directory, where to place the
-# configuration files, and any additional options to pass to initdb.
-#
-# The initscript also uses these variables to inform PostgreSQL where to find
-# its data directory and configuration files.
-#
-##############################################################################
-
-# Location of configuration files
-PGDATA="/etc/postgresql-9.1/"
-
-# Where the data directory is located/to be created
-DATA_DIR="/var/lib/postgresql/9.1/data"
-
-# Additional options to pass to initdb.
-# See `man initdb' for available options.
-#PG_INITDB_OPTS="--locale=en_US.UTF-8"
--- /dev/null
+# Which port and socket to bind PostgreSQL
+PGPORT="5432"
+
+# How long to wait for server to start in seconds
+START_TIMEOUT=10
+
+# NICE_QUIT ignores new connections and wait for clients to disconnect from
+# server before shutting down. NICE_TIMEOUT in seconds determines how long to
+# wait for this to succeed.
+NICE_TIMEOUT=60
+
+# Forecfully disconnect clients from server and shut down. This is performed
+# after NICE_QUIT. Terminated client connections have their open transactions
+# rolled back.
+# Set RUDE_QUIT to "NO" to disable. RUDE_TIMEOUT in seconds.
+RUDE_QUIT="YES"
+RUDE_TIMEOUT=30
+
+# If the server still fails to shutdown, you can force it to quit by setting
+# this to YES and a recover-run will execute on the next startup.
+# Set FORCE_QUIT to "YES" to enable. FORCE_TIMEOUT in seconds.
+FORCE_QUIT="NO"
+FORCE_TIMEOUT=2
+
+# Extra options to run postmaster with, e.g.:
+# -N is the maximal number of client connections
+# -B is the number of shared buffers and has to be at least 2x the value for -N
+# Please read the man-page to postmaster for more options. Many of these
+# options can be set directly in the configuration file.
+#PGOPTS="-N 512 -B 1024"
+
+# Pass extra environment variables. If you have to export environment variables
+# for the database process, this can be done here.
+# Don't forget to escape quotes.
+#PG_EXTRA_ENV="PGPASSFILE=\"/path/to/.pgpass\""
+
+##############################################################################
+#
+# The following values should not be arbitrarily changed.
+#
+# `emerge --config dev-db/postgresql-server:9.2' uses these values to
+# determine where to create the data directory, where to place the
+# configuration files, and any additional options to pass to initdb.
+#
+# The initscript also uses these variables to inform PostgreSQL where to find
+# its data directory and configuration files.
+#
+##############################################################################
+
+# Location of configuration files
+PGDATA="/etc/postgresql-9.2/"
+
+# Where the data directory is located/to be created
+DATA_DIR="/var/lib/postgresql/9.2/data"
+
+# Additional options to pass to initdb.
+# See `man initdb' for available options.
+#PG_INITDB_OPTS="--locale=en_US.UTF-8"
--- /dev/null
+# Extra options for tmpfiles.sh
+#tmpfiles_opts="--verbose"
+tmpfiles_opts=""
--- /dev/null
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time). If that clock is set to the local time, then
+# set CLOCK to "local". Note that if you dual boot with Windows, then
+# you should set it to "local".
+clock="UTC"
+
+# If you want the hwclock script to set the system time (software clock)
+# to match the current hardware clock during bootup, leave this
+# commented out.
+# However, you can set this to "NO" ifyou are running a modern kernel
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+#clock_hctosys="YES"
+
+# If you do not want to set the hardware clock to the current system
+# time (software clock) during shutdown, set this to no.
+#clock_systohc="YES"
+
+# If you wish to pass any other arguments to hwclock during bootup,
+# you may do so here. Alpha users may wish to use --arc or --srm here.
+clock_args=""
+++ /dev/null
-# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time). If that clock is set to the local time, then
-# set CLOCK to "local". Note that if you dual boot with Windows, then
-# you should set it to "local".
-clock="UTC"
-
-# If you want to set the Hardware Clock to the current System Time
-# (software clock) during shutdown, then say "YES" here.
-# You normally don't need to do this if you run a ntp daemon.
-clock_systohc="NO"
-
-# If you want to set the system time to the current hardware clock
-# during bootup, then say "YES" here. You do not need this if you are
-# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
-# Also, be aware that if you set this to "NO", the system time will
-# never be saved to the hardware clock unless you set
-# clock_systohc="YES" above.
-clock_hctosys="YES"
-
-# If you wish to pass any other arguments to hwclock during bootup,
-# you may do so here. Alpha users may wish to use --arc or --srm here.
-clock_args=""
--- /dev/null
+# Use keymap to specify the default console keymap. There is a complete tree
+# of keymaps in /usr/share/keymaps to choose from.
+keymap="us"
+
+# Should we first load the 'windowkeys' console keymap? Most x86 users will
+# say "yes" here. Note that non-x86 users should leave it as "no".
+# Loading this keymap will enable VT switching (like ALT+Left/Right)
+# using the special windows keys on the linux console.
+windowkeys="YES"
+
+# The maps to load for extended keyboards. Most users will leave this as is.
+extended_keymaps=""
+#extended_keymaps="backspace keypad euro2"
+
+# Tell dumpkeys(1) to interpret character action codes to be
+# from the specified character set.
+# This only matters if you set unicode="yes" in /etc/rc.conf.
+# For a list of valid sets, run `dumpkeys --help`
+dumpkeys_charset=""
+
+# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
+# To fix this, set to "yes"
+fix_euro="NO"
+++ /dev/null
-# Use keymap to specify the default console keymap. There is a complete tree
-# of keymaps in /usr/share/keymaps to choose from.
-keymap="us"
-
-# Should we first load the 'windowkeys' console keymap? Most x86 users will
-# say "yes" here. Note that non-x86 users should leave it as "no".
-# Loading this keymap will enable VT switching (like ALT+Left/Right)
-# using the special windows keys on the linux console.
-windowkeys="YES"
-
-# The maps to load for extended keyboards. Most users will leave this as is.
-extended_keymaps=""
-#extended_keymaps="backspace keypad euro2"
-
-# Tell dumpkeys(1) to interpret character action codes to be
-# from the specified character set.
-# This only matters if you set unicode="yes" in /etc/rc.conf.
-# For a list of valid sets, run `dumpkeys --help`
-dumpkeys_charset=""
-
-# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
-# To fix this, set to "yes"
-fix_euro="NO"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
+++ /dev/null
-# Global OpenRC configuration settings
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-rc_shell=/sbin/sulogin
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug is a list of services that we allow to be hotplugged.
-# By default we do not allow hotplugging.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# This service is intrinsically included in the boot runlevel.
-# To disable services, prefix with a !
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-# Example - rc_hotplug="*"
-# This allows all services to be hotplugged
-#rc_hotplug="*"
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-unicode="YES"
-
-# Below is the default list of network fstypes.
-#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
-
-# Pass ulimit parameters
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
# Random seed for forging saved session types, etc. of unknown users.
# This value should be random but constant across the login domain.
# Default is 0
-ForgingSeed=1348094161
+ForgingSeed=1353971086
# Specify conversation plugins for the login dialog. Each plugin can be
# specified as a base name (which expands to $kde_modulesdir/kgreet_$base)
# or as a full pathname.
-##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $
+##VERSION: $Id: authdaemonrc.in 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $
+##VERSION: $Id: authdaemonrc.in 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authldaprc,v 1.25 2005/10/05 00:07:32 mrsam Exp $
+##VERSION: $Id: authldaprc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authldaprc,v 1.25 2005/10/05 00:07:32 mrsam Exp $
+##VERSION: $Id: authldaprc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
+##VERSION: $Id: authmysqlrc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2007 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
+##VERSION: $Id: authmysqlrc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2007 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authpgsqlrc,v 1.13 2008/12/18 12:08:25 mrsam Exp $
+##VERSION: $Id: authpgsqlrc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
-##VERSION: $Id: authpgsqlrc,v 1.13 2008/12/18 12:08:25 mrsam Exp $
+##VERSION: $Id: authpgsqlrc 17 2011-04-04 02:07:37Z mrsam $
#
# Copyright 2000-2004 Double Precision, Inc. See COPYING for
# distribution information.
# GO INTO /etc/csh.cshrc NOT /etc/csh.env
setenv ANT_HOME '/usr/share/ant'
-setenv CONFIG_PROTECT '/usr/share/gnupg/qualified.txt /usr/share/config /usr/share/openvpn/easy-rsa'
+setenv CONFIG_PROTECT '/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
setenv EDITOR '/usr/bin/vim'
setenv FLTK_DOCDIR '/usr/share/doc/fltk-1.3.0-r1/html'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+setenv MULTIOSDIRS '../lib64:../lib32'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PAGER '/usr/bin/less'
setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
# Printer configuration file for CUPS v1.5.2
-# Written by cupsd on 2012-11-25 13:06
+# Written by cupsd on 2012-12-03 17:22
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer Virtual_Printer>
UUID urn:uuid:7ae9b14e-20ad-3628-427d-870cdf4cdea4
--- /dev/null
+<driconf>
+ <device screen="0" driver="i965">
+ <application name="Unigine Sanctuary" executable="Sanctuary">
+ <option name="force_glsl_extensions_warn" value="true" />
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ <application name="Unigine Tropics" executable="Tropics">
+ <option name="force_glsl_extensions_warn" value="true" />
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ <application name="Unigine Heaven (32-bit)" executable="heaven_x86">
+ <option name="force_glsl_extensions_warn" value="true" />
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ <application name="Unigine Heaven (64-bit)" executable="heaven_x64">
+ <option name="force_glsl_extensions_warn" value="true" />
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ <application name="Unigine OilRush (32-bit)" executable="OilRush_x86">
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ <application name="Unigine OilRush (64-bit)" executable="OilRush_x64">
+ <option name="disable_blend_func_extended" value="true" />
+ </application>
+ </device>
+</driconf>
GCC_SPECS=""
MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man"
INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info"
+MULTIOSDIRS="../lib64:../lib32"
--- /dev/null
+CONFIG_PROTECT="/var/lib/hsqldb"
# Configuration file for eselect
# This file has been automatically generated.
-LDPATH="/usr/lib/postgresql:/usr/lib64/postgresql:/usr/lib64/postgresql-9.1/lib64/"
-MANPATH="/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/"
+LDPATH="/usr/lib/postgresql:/usr/lib64/postgresql:/usr/lib64/postgresql-9.2/lib64/"
+MANPATH="/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/"
MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man"
INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/info"
STDCXX_INCDIR="g++-v4"
+CTARGET="x86_64-pc-linux-gnu"
+GCC_SPECS=""
+MULTIOSDIRS="../lib64:../lib32"
GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4"
/usr/include/libpq
/usr/include/postgres_ext.h
/usr/lib64/postgresql
-/usr/lib64/libpq.so.5.4
/usr/lib64/libecpg_compat.so.3
/usr/lib64/libpgtypes.so.3
-/usr/lib64/libecpg_compat.so.3.3
/usr/lib64/libpq.so.5
/usr/lib64/libpgport.a
/usr/lib64/libecpg.a
/usr/lib64/libecpg.so.6
+/usr/lib64/libecpg.so.6.4
/usr/lib64/libecpg.so
/usr/lib64/libpq.so
-/usr/lib64/libecpg.so.6.3
/usr/lib64/libpqwalreceiver.so
+/usr/lib64/libecpg_compat.so.3.4
+/usr/lib64/libpgtypes.so.3.3
/usr/lib64/libpgtypes.so
/usr/lib64/libpgtypes.a
/usr/lib64/libpq.a
-/usr/lib64/libpgtypes.so.3.2
/usr/lib64/libecpg_compat.a
+/usr/lib64/libpq.so.5.5
/usr/lib64/libecpg_compat.so
/usr/bin/pg_standby
/usr/bin/pg_basebackup
/usr/bin/pgbench
/usr/bin/initdb
/usr/bin/createdb
+/usr/bin/pg_test_timing
/usr/bin/pg_controldata
/usr/bin/createuser
/usr/bin/postgres
/usr/bin/ecpg
/usr/bin/clusterdb
/usr/bin/pg_archivecleanup
+/usr/bin/pg_receivexlog
/usr/bin/pg_resetxlog
/usr/bin/dropdb
/usr/share/postgresql
+++ /dev/null
-/usr/bin/pg_standby91
-/usr/bin/pg_basebackup91
-/usr/bin/pg_test_fsync91
-/usr/bin/pg_ctl91
-/usr/bin/postmaster91
-/usr/bin/droplang91
-/usr/bin/pg_dump91
-/usr/bin/pg_restore91
-/usr/bin/pg_config91
-/usr/bin/vacuumlo91
-/usr/bin/dropuser91
-/usr/bin/pg_dumpall91
-/usr/bin/oid2name91
-/usr/bin/reindexdb91
-/usr/bin/vacuumdb91
-/usr/bin/createlang91
-/usr/bin/pgbench91
-/usr/bin/initdb91
-/usr/bin/createdb91
-/usr/bin/pg_controldata91
-/usr/bin/createuser91
-/usr/bin/postgres91
-/usr/bin/pg_upgrade91
-/usr/bin/psql91
-/usr/bin/ecpg91
-/usr/bin/clusterdb91
-/usr/bin/pg_archivecleanup91
-/usr/bin/pg_resetxlog91
-/usr/bin/dropdb91
--- /dev/null
+/usr/bin/pg_standby92
+/usr/bin/pg_basebackup92
+/usr/bin/pg_test_fsync92
+/usr/bin/pg_ctl92
+/usr/bin/postmaster92
+/usr/bin/droplang92
+/usr/bin/pg_dump92
+/usr/bin/pg_restore92
+/usr/bin/pg_config92
+/usr/bin/vacuumlo92
+/usr/bin/dropuser92
+/usr/bin/pg_dumpall92
+/usr/bin/oid2name92
+/usr/bin/reindexdb92
+/usr/bin/vacuumdb92
+/usr/bin/createlang92
+/usr/bin/pgbench92
+/usr/bin/initdb92
+/usr/bin/createdb92
+/usr/bin/pg_test_timing92
+/usr/bin/pg_controldata92
+/usr/bin/createuser92
+/usr/bin/postgres92
+/usr/bin/pg_upgrade92
+/usr/bin/psql92
+/usr/bin/ecpg92
+/usr/bin/clusterdb92
+/usr/bin/pg_archivecleanup92
+/usr/bin/pg_receivexlog92
+/usr/bin/pg_resetxlog92
+/usr/bin/dropdb92
+++ /dev/null
-postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.5"
+++ /dev/null
-postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.5"
+++ /dev/null
-postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.5"
--- /dev/null
+postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.2.1"
--- /dev/null
+postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.2.1"
--- /dev/null
+postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.2.1"
</dir>
</dir>
<dir name="addressbook">
- <entry name="gal_cache_interval" mtime="1326800522" schema="/schemas/apps/evolution/addressbook/gal_cache_interval"/>
+ <entry name="gal_cache_interval" mtime="1353964695" schema="/schemas/apps/evolution/addressbook/gal_cache_interval"/>
<dir name="display">
<entry name="show_preview" mtime="1350812236" schema="/schemas/apps/evolution/addressbook/display/show_preview"/>
<entry name="vpane_position" mtime="1350812236" schema="/schemas/apps/evolution/addressbook/display/vpane_position"/>
<entry name="autofs_friendly" mtime="1350812527" type="schema" stype="bool" owner="drivemount-applet">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
- <longdesc></longdesc>
</local_schema>
</entry>
<entry name="mount_point" mtime="1350812527" type="schema" stype="string" owner="drivemount-applet">
<default type="string">
<stringvalue>/mnt/floppy</stringvalue>
</default>
- <longdesc></longdesc>
</local_schema>
</entry>
<entry name="auto_eject" mtime="1350812527" type="schema" stype="bool" owner="drivemount-applet">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
- <longdesc></longdesc>
</local_schema>
</entry>
<entry name="scale" mtime="1350812527" type="schema" stype="bool" owner="drivemount-applet">
<local_schema locale="C" short_desc="">
<default type="bool" value="false"/>
- <longdesc></longdesc>
</local_schema>
</entry>
<entry name="pixmap" mtime="1350812527" type="schema" stype="int" owner="drivemount-applet">
<local_schema locale="C" short_desc="">
<default type="int" value="0"/>
- <longdesc></longdesc>
</local_schema>
</entry>
<entry name="interval" mtime="1350812527" type="schema" stype="int" owner="drivemount-applet">
</dir>
</dir>
<dir name="addressbook">
- <entry name="gal_cache_interval" mtime="1326800522" type="schema" stype="int" owner="evolution-addressbook">
+ <entry name="gal_cache_interval" mtime="1353964695" type="schema" stype="int" owner="evolution-addressbook">
<local_schema locale="C" short_desc="Specifies the time interval to refresh the GAL Cache. ">
<default type="int" value="7"/>
<longdesc>This key specifies the number of days' interval between
[Games]
-*Engines* = Dots Gnect Iagno Go Reversi Battleship Gnibbles
-Battleship = p6
-Dots = p1
-Gnect = p2
-Gnibbles = p7
-Go = p4
-Iagno = p3
-Reversi = p5
+*Engines* = Gnect Iagno Gnibbles
+Gnect = p1
+Gnibbles = p3
+Iagno = p2
[p1]
-Author = Matt Williams
-CommandLine = ksquares
-Frontend = kde
-Homepage = http://games.kde.org/
-Name = KSquares
-ProtocolEngine = Dots
-ProtocolVersion = 4
-Version = 0.3
-
-[p2]
Author = The GNOME Project
CommandLine = /usr/bin/gnect
Frontend = gtk
ProtocolVersion = 1
Version = 2.28.2
-[p3]
+[p2]
Author = The GNOME Project
CommandLine = /usr/bin/iagno
Frontend = gtk
ProtocolVersion = 1
Version = 2.28.2
-[p4]
-Author = Sascha Peilicke
-CommandLine = kigo
-Frontend = kde
-Homepage = http://games.kde.org/kigo
-Name = Kigo
-ProtocolEngine = Go
-ProtocolVersion = 1
-Version = 1.0
-
-[p5]
-Author = Mario Weilguni, Inge Wallin, Dmitry Suzdalev
-CommandLine = kreversi
-Frontend = kde
-Homepage = http://games.kde.org/
-Name = KReversi
-ProtocolEngine = Reversi
-ProtocolVersion = 4
-Version = 2.0
-
-[p6]
-Author = Daniel Molkentin, Nikolas Zimmermann, Paolo Capriotti
-CommandLine = kbattleship
-Frontend = kde
-Homepage = http://games.kde.org/
-Name = KBattleship
-ProtocolEngine = Battleship
-ProtocolVersion = 1
-Version = 2.0
-
-[p7]
+[p3]
Author = The GNOME Project
CommandLine = /usr/bin/gnibbles
Frontend = gtk
# GTK+ Input Method Modules file
# Automatically generated file, do not edit
-# Created by gtk-query-immodules-2.0-32 from gtk+-2.24.10
+# Created by gtk-query-immodules-2.0-32 from gtk+-2.24.12
#
# ModulesPath = /root/.gtk-2.0/2.10.0/i686-pc-linux-gnu/immodules:/root/.gtk-2.0/2.10.0/immodules:/root/.gtk-2.0/i686-pc-linux-gnu/immodules:/root/.gtk-2.0/immodules:/usr/lib32/gtk-2.0/2.10.0/i686-pc-linux-gnu/immodules:/usr/lib32/gtk-2.0/2.10.0/immodules:/usr/lib32/gtk-2.0/i686-pc-linux-gnu/immodules:/usr/lib32/gtk-2.0/immodules
#
--- /dev/null
+# Hsqldb Server cfg file.
+# See the UNIX Quick Start and the Advanced Topics chapters
+# of the Hsqldb User Guide.
+
+server.database.0=file:/var/lib/hsqldb/db1
+server.urlid.0=localhost
+
+# Warning!
+# When running hsqldb in Server mode, for each additional database
+# the server.urlid.X entry must have a proper corresponding urlid
+# section in the 'sqltool.rc' file.
+# Otherwise you may have problems with shutting down the server.
+#
+# Note that each server can serve only up to 10 different
+# databases simultaneously (with consecutive {0-9} suffixes).
+
+# An example of additional database.
+#server.database.1=file:/var/lib/hsqldb/newdb/newdb
+#server.dbname.1=newdb
+#server.urlid.1=newdb
--- /dev/null
+# $Id sqltool.rc,v 1.11 2004/07/18 21:34:35 unsaved Exp $
+
+# This is a sample SqlTool configuration file, a.k.a. rc file.
+
+# This is for a hsqldb Server running with default settings on your local
+# computer (and for which you have not changed the password for "sa").
+urlid localhost
+url jdbc:hsqldb:hsql://localhost
+username sa
+password
+
+# Each urlid section in this file corresponds to one of the
+# server.urlid.X entries in the 'server.properties' file.
+# This is required by the hsqldb init script.
+
+# An example of additional database.
+#urlid newdb
+#url jdbc:hsqldb:hsql://localhost/newdb
+#username sa
+#password
keyword -prefix -timeout
}
-dir_writable()
-{
- mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
-}
-
: ${wipe_tmp:=${WIPE_TMP:-yes}}
: ${log_dmesg:=${LOG_DMESG:-yes}}
if ! [ -d "$dir" ]; then
mkdir -p "$dir" || return $?
fi
- dir_writable "$dir" || return 1
+ checkpath -W "$dir" || return 1
chmod a+rwt "$dir" 2> /dev/null
cd "$dir" || return 1
if yesno $wipe_tmp; then
fi
done
- if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
+ if [ "$RC_UNAME" = Linux -a -d /run ]; then
migrate_to_run /var/lock /run/lock
migrate_to_run /var/run /run
fi
- if dir_writable /var/run; then
+ if checkpath -W /var/run; then
ebegin "Creating user login records"
local xtra=
[ "$RC_UNAME" = NetBSD ] && xtra=x
cleanup_tmp_dir "$tmp"
done
- if dir_writable /tmp; then
+ if checkpath -W /tmp; then
# Make sure our X11 stuff have the correct permissions
# Omit the chown as bootmisc is run before network is up
# and users may be using lame LDAP auth #139411
fi
if yesno $log_dmesg; then
- if $logw || dir_writable /var/log; then
+ if $logw || checkpath -W /var/log; then
# Create an 'after-boot' dmesg log
if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
dmesg > /var/log/dmesg
fi
fi
- [ -w /etc/nologin ] && rm -f /etc/nologin
return 0
}
return 0
}
+
+# vim: ft=sh
eend $retval
# Store the last font so we can use it ASAP on boot
- if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
+ if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
mkdir -p "$RC_LIBEXECDIR"/console
for font in /usr/share/consolefonts/"$consolefont".*; do
:
description="Mount system critical filesystems in /dev."
depend() {
- use dev
+ use dev-mount
+ before dev
keyword -prefix -vserver
}
depend()
{
before dev modules
- keyword -vserver
+ keyword -lxc -prefix -vserver
}
start()
done
if [ "$RC_UNAME" = Linux ]; then
- fsck_opts="$fsck_opts -C0 -T"
+ local skiptypes x
+ for x in $net_fs_list $extra_net_fs_list; do
+ skiptypes="${skiptypes}no${x},"
+ done
+ skiptypes="${skiptypes}noopts=_netdev"
+ fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
fsck_args=${fsck_args--A -p}
if echo 2>/dev/null >/.test.$$; then
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-db/hsqldb/files/hsqldb,v 1.2 2007/12/19 21:58:05 caster Exp $
+
+depend() {
+ use net
+}
+
+start() {
+ ebegin "Starting HSQL Database"
+ hsqldb_enable=yes /var/lib/hsqldb/bin/hsqldb start
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping HSQL Database"
+ hsqldb_enable=yes /var/lib/hsqldb/bin/hsqldb stop
+ eend $?
+}
"$utc_cmd" != --utc -o \
-n "$clock_args" ];
then
- if yesno $clock_hctosys; then
+ if yesno ${clock_hctosys:-YES}; then
_hwclock --hctosys $utc_cmd $clock_args
else
_hwclock --systz $utc_cmd $clock_args
{
# Don't tweak the hardware clock on LiveCD halt.
[ -n "$CDBOOT" ] && return 0
- yesno $clock_systohc || return 0
+ yesno ${clock_systohc:-YES} || return 0
local retval=0 errstr=""
setupopts
#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.2 2011/12/04 10:15:59 swegener Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.13-r1.init,v 1.1 2012/09/14 17:58:26 axs Exp $
extra_commands="save panic"
extra_started_commands="reload"
depend() {
before net
- use logger
}
set_table_policy() {
save() {
ebegin "Saving ${iptables_name} state"
- touch "${iptables_save}"
- chmod 0600 "${iptables_save}"
+ checkpath -q -d "$(dirname "${iptables_save}")"
+ checkpath -q -m 0600 -f "${iptables_save}"
${iptables_bin}-save ${SAVE_RESTORE_OPTIONS} > "${iptables_save}"
eend $?
}
#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.2 2011/12/04 10:15:59 swegener Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.13-r1.init,v 1.1 2012/09/14 17:58:26 axs Exp $
extra_commands="save panic"
extra_started_commands="reload"
depend() {
before net
- use logger
}
set_table_policy() {
save() {
ebegin "Saving ${iptables_name} state"
- touch "${iptables_save}"
- chmod 0600 "${iptables_save}"
+ checkpath -q -d "$(dirname "${iptables_save}")"
+ checkpath -q -m 0600 -f "${iptables_save}"
${iptables_bin}-save ${SAVE_RESTORE_OPTIONS} > "${iptables_save}"
eend $?
}
fi
# Save the keymapping for use immediately at boot
- if [ -w "$RC_LIBEXECDIR" ]; then
+ if checkpath -W "$RC_LIBEXECDIR"; then
mkdir -p "$RC_LIBEXECDIR"/console
dumpkeys >"$RC_LIBEXECDIR"/console/keymap
fi
stop()
{
+ yesno $RC_GOINGDOWN || return 0
# We never unmount / or /dev or $RC_SVCDIR
# Bug 381783
done
if [ "$RC_UNAME" = Linux ]; then
- no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+ no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*|/usr"
fi
no_umounts_r="^($no_umounts_r)$"
depend()
{
need killprocs savecache
- keyword -prefix -openvz -vserver -lxc
+ keyword -openvz -prefix -vserver -lxc
}
start()
{
+ local ret=0
+
# Flush all pending disk writes now
sync; sync
# Bug 381783
local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
- local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
+ local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
# RC_NO_UMOUNTS is an env var that can be set by plugins
local IFS="$IFS:"
do_unmount "umount -r" \
--skip-point-regex "$m" \
"${fs:+--skip-fstype-regex}" $fs --nonetdev
+ ret=$?
+
eoutdent
- eend $?
+
+ eend $ret
}
local IFVAR=$(shell_var "${IFACE}")
need localmount
+ if [ "$RC_UNAME" = Linux -a "$IFACE" != lo ]; then
+ need sysfs
+ fi
after bootmisc
- provide net
keyword -jail -prefix -vserver
case "${IFACE}" in
- lo|lo0);;
- *) after net.lo net.lo0 dbus;;
+ lo|lo0) ;;
+ *)
+ after net.lo net.lo0 dbus
+ provide net
+ ;;
esac
if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
eval prov=\$rc_${dep}_${IFVAR}
if [ -n "${prov}" ]; then
${dep} ${prov}
+ ewarn "rc_${dep}_${IFVAR} is deprecated."
+ ewarn "Please use rc_net_${IFVAR}_${dep} instead."
fi
done
}
_has_carrier && return 0
eval timeout=\$carrier_timeout_${IFVAR}
- timeout=${timeout:-${carrier_timeout:-5}}
+ timeout=${timeout:-${carrier_timeout:-0}}
# Incase users don't want this nice feature ...
[ ${timeout} -le 0 ] && return 0
# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
# Released under the 2-clause BSD license.
-description="Mounts network shares according to /etc/fstab."
-
-need_portmap()
-{
- local opts=
- local IFS="
-"
- set -- $(fstabinfo --options --fstype nfs,nfs4)
- for opts; do
- case ,$opts, in
- *,noauto,*|*,nolock,*);;
- *) return 0;;
- esac
- done
- return 1
-}
+description="Mounts network shares, other than NFS, according to /etc/fstab."
+# We skip all NFS shares in this script because they require extra
+# daemons to be running on the client in order to work correctly.
+# It is best to allow nfs-utils to handle all nfs shares.
depend()
{
- # Only have portmap as a dependency if there is a nfs mount in fstab
- # that is set to mount at boot
- local pmap=
- if need_portmap; then
- pmap="rpc.statd"
- [ -x /etc/init.d/rpcbind ] \
- && pmap="$pmap rpcbind" \
- || pmap="$pmap portmap"
- fi
-
config /etc/fstab
- need net $pmap
use afc-client amd autofs openvpn
- use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
+ use dns
keyword -jail -prefix -vserver
}
start()
{
- local myneed= myuse= pmap="portmap" nfsmounts=
- [ -x /etc/init.d/rpcbind ] && pmap="rpcbind"
-
local x= fs= rc=
for x in $net_fs_list $extra_net_fs_list; do
case "$x" in
nfs|nfs4)
- # If the nfsmount script took care of the nfs
- # filesystems, then there's no point in trying
- # them twice
- service_started nfsmount && continue
-
- # Only try to mount NFS filesystems if portmap was
- # started. This is to fix "hang" problems for new
- # users who do not add portmap to the default runlevel.
- if need_portmap && ! service_started "$pmap"; then
- continue
- fi
+ continue
;;
esac
fs="$fs${fs:+,}$x"
. "$RC_LIBEXECDIR"/sh/rc-mount.sh
for x in $net_fs_list $extra_net_fs_list; do
- fs="$fs${fs:+,}$x"
+ case "$x" in
+ nfs|nfs4)
+ continue
+ ;;
+ *)
+ fs="$fs${fs:+,}$x"
+ ;;
+ esac
done
if [ -n "$fs" ]; then
umount -at $fs || eerror "Failed to simply unmount filesystems"
eindent
fs=
for x in $net_fs_list $extra_net_fs_list; do
- fs="$fs${fs:+|}$x"
+ case "$x" in
+ nfs|nfs4)
+ continue
+ ;;
+ *)
+ fs="$fs${fs:+|}$x"
+ ;;
+ esac
done
[ -n "$fs" ] && fs="^($fs)$"
do_unmount umount ${fs:+--fstype-regex} $fs --netdev
+++ /dev/null
-#!/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-# This script was inspired by the equivalent rc.d network from NetBSD.
-
-description="Configures network interfaces."
-__nl="
-"
-
-depend()
-{
- need localmount
- after bootmisc
- provide net
- keyword -jail -prefix -vserver
-}
-
-uniqify()
-{
- local result= i=
- for i; do
- case " $result " in
- *" $i "*);;
- *) result="$result $i";;
- esac
- done
- echo "${result# *}"
-}
-
-reverse()
-{
- local result= i=
- for i; do
- result="$i $result"
- done
- echo "${result# *}"
-}
-
-sys_interfaces()
-{
- case "$RC_UNAME" in
- Linux)
- local w= rest= i= cmd=$1
- while read w rest; do
- i=${w%%:*}
- [ "$i" != "$w" ] || continue
- if [ "$cmd" = u ]; then
- ifconfig "$i" | grep -q "[ ]*UP" || continue
- fi
- printf "%s " "$i"
- done </proc/net/dev
- ;;
- *)
- ifconfig -l$1
- ;;
- esac
-}
-
-tentative()
-{
- local inet= address= rest=
-
- case "$RC_UNAME" in
- Linux)
- [ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
- [ -n "$(ip -f inet6 addr show tentative)" ]
- ;;
- *)
- local inet= address= rest=
- LC_ALL=C ifconfig -a | while read inet address rest; do
- case "${inet}" in
- inet6)
- case "${rest}" in
- *" "tentative*) return 2;;
- esac
- ;;
- esac
- done
- [ $? = 2 ]
- ;;
- esac
-}
-
-
-auto_interfaces()
-{
- local ifs= c= f=
-
- case "$RC_UNAME" in
- NetBSD)
- for c in $(ifconfig -C 2>/dev/null); do
- for f in /etc/ifconfig.${c}[0-9]*; do
- [ -f "$f" ] && printf "%s" "$f{##*.} "
- done
- done
- ;;
- *)
- for f in /etc/ifconfig.*; do
- [ -f "$f" ] && printf "%s" "${f##*.} "
- done
- for f in /etc/ip.*; do
- [ -f "$f" ] && printf "%s" "${f##*.} "
- done
- ;;
- esac
- echo
-}
-
-interfaces()
-{
- uniqify $(sys_interfaces "$@") $interfaces $(auto_interfaces)
-}
-
-dumpargs()
-{
- local f="$1"
-
- shift
- case "$@" in
- '') [ -f "$f" ] && cat "$f";;
- *"$__nl"*) echo "$@";;
- *)
- (
- set -o noglob
- IFS=';'; set -- $@
- IFS="$__nl"; echo "$*"
- );;
- esac
-}
-
-intup=false
-runip()
-{
- local int="$1" err=
- shift
-
- # Ensure we have a valid broadcast address
- case "$@" in
- *" broadcast "*|*" brd "*) ;;
- *:*) ;; # Ignore IPv6
- *) set -- "$@" brd +;;
- esac
-
- err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
- if [ -z "$err" ]; then
- # ip does not bring up the interface when adding addresses
- if ! $intup; then
- ip link set "$int" up
- intup=true
- fi
- return 0
- fi
- if [ "$err" = "RTNETLINK answers: File exists" ]; then
- ip address del "$@" dev "$int" 2>/dev/null
- fi
- # Localise the error
- ip address add "$@" dev "$int"
-}
-
-routeflush()
-{
- if [ "$RC_UNAME" = Linux ]; then
- if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
- ip route flush scope global
- ip route delete default 2>/dev/null
- else
- # Sadly we also delete some link routes, but
- # this cannot be helped
- local dest= gate= net= flags= rest=
- route -n | while read dest gate net flags rest; do
- [ -z "$net" ] && continue
- case "$dest" in
- [0-9]*) ;;
- *) continue;;
- esac
- local xtra= netmask="netmask $net"
- case "$flags" in
- U) continue;;
- *H*) flags=-host; netmask=;;
- *!*) flags=-net; xtra=reject;;
- *) flags=-net;;
- esac
- route del $flags $dest $netmask $xtra
- done
- # Erase any default dev eth0 routes
- route del default 2>/dev/null
- fi
- else
- route -qn flush
- fi
-}
-
-runargs()
-{
- dumpargs "$@" | while read -r args; do
- case "$args" in
- ''|"#"*) ;;
- *)
- (
- eval vebegin "${args#*!}"
- eval "${args#*!}"
- veend $?
- );;
- esac
- done
-}
-
-start()
-{
- local cr=0 r= int= intv= cmd= args= upcmd=
-
- if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
- domainname=$(cat /etc/defaultdomain)
- fi
- if [ -n "$domainname" ]; then
- ebegin "Setting NIS domainname: $domainname"
- domainname "$domainname"
- eend $?
- fi
-
- ewarn
- ewarn "The $RC_SVCNAME script is deprecated and will be"
- ewarn "removed in the future."
- ewarn "Please use the net.* scripts to manage your network interfaces."
- ewarn
-
- einfo "Starting network"
- routeflush
- if [ "$RC_UNAME" = "Linux" ]; then
- ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
- route add -net 127.0.0.0 netmask 255.0.0.0 \
- gw 127.0.0.1 reject 2>/dev/null
- else
- ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
- route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
- 127.0.0.1 -reject || cr=1
- fi
- eindent
- for int in $(interfaces); do
- local func= cf=
- intv=$(shell_var "$int")
- eval upcmd=\$ifup_$intv
- for func in ip ifconfig; do
- eval cmd=\$${func}_$intv
- if [ -n "$cmd" -o -f /etc/"$func.$int" ]; then
- cf=/etc/"$func.$int"
- break
- fi
- done
- [ -n "$cf" -o -n "$upcmd" -o \
- -f /etc/ifup."$int" -o -f "$cf" ] || continue
- veinfo "$int"
- case "$func" in
- ip) func=runip; intup=false;;
- esac
- eindent
- runargs /etc/ifup."$int" "$upcmd"
- r=0
- dumpargs "$cf" "$cmd" | while read -r args; do
- case "$args" in
- ''|"#"*) ;;
- "!"*)
- (
- eval vebegin "${args#*!}"
- eval "${args#*!}"
- veend $?
- );;
- *)
- (
- set -o noglob
- eval set -- "$args"
- vebegin "$@"
- $func "$int" "$@"
- veend $?
- );;
- esac
- done
- eoutdent
- done
- eoutdent
- eend $cr
-
- # Wait for any inet6 tentative addresses
- r=5
- while [ $r -gt 0 ]; do
- tentative || break
- [ $r = 5 ] && vebegin "Waiting for tentative addresses"
- sleep 1
- : $(( r -= 1 ))
- done
- if [ $r != 5 ]; then
- [ $r != 0 ]
- veend $?
- fi
-
- if [ -n "$defaultroute" ]; then
- ebegin "Setting default route $defaultroute"
- route add default $defaultroute
- eend $?
- elif [ -n "$defaultiproute" ]; then
- ebegin "Setting default route $defaultiproute"
- ip route add default $defaultiproute
- eend $?
- fi
-
- if [ -n "$defaultroute6" ]; then
- ebegin "Setting default route $defaultroute6"
- if [ "$RC_UNAME" = Linux ]; then
- routecmd="route -A inet6 add"
- else
- routecmd="route -inet6 add"
- fi
- $routecmd default $defaultroute6
- eend $?
- elif [ -n "$defaultiproute6" ]; then
- ebegin "Setting default route $defaultiproute6"
- ip -f inet6 route add default $defaultiproute6
- eend $?
- fi
-
- return 0
-}
-
-stop()
-{
- # Don't stop the network at shutdown.
- # We don't use the noshutdown keyword so that we are started again
- # correctly if we go back to multiuser.
- yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
-
- local int= intv= cmd= downcmd= r=
- einfo "Stopping network"
- routeflush
- eindent
- for int in $(reverse $(interfaces u)); do
- intv=$(shell_var "$int")
- eval downcmd=\$ifdown_$intv
- eval cmd=\$ip_$intv
- [ -z "$cmd" ] && eval cmd=\$ifconfig_$intv
- if [ -n "$cmd" -o -f /etc/ip."$int" -o \
- -f /etc/ifconfig."$int" -o \
- -n "$downcmd" -o -f /etc/ifdown."$int" ];
- then
- veinfo "$int"
- runargs /etc/ifdown."$int" "$downcmd"
- if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
- # We need to do this, otherwise we may
- # fail to add things correctly on restart
- ip address flush dev "$int" 2>/dev/null
- fi
- ifconfig "$int" down 2>/dev/null
- ifconfig "$int" destroy 2>/dev/null
- fi
- done
- eoutdent
- eend 0
-}
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-extra_started_commands="reload"
-
-get_config() {
- [ -f ${PGDATA%/}/postgresql.conf ] || return 1
-
- eval echo $(sed -e 's:#.*::' ${PGDATA%/}/postgresql.conf | awk '$1 == "'$1'" { print ($2 == "=" ? $3 : $2) }')
-}
-
-depend() {
- use net
- provide postgresql
-
- if [ "$(get_config log_destination)" = "syslog" ]; then
- need logger
- fi
-}
-
-configured_port=$(get_config port)
-: ${configured_port:=${PGPORT}}
-socket_path=$(get_config unix_socket_directory)
-: ${socket_path:=/run/postgresql}
-
-checkconfig() {
- # Check that DATA_DIR has been set
- if [ -z ${DATA_DIR} ] ; then
- eerror "DATA_DIR not set"
- eerror "HINT: Perhaps you need to update /etc/conf.d/postgresql-9.1"
- return 1
- fi
-
- # Check that DATA_DIR exists
- if [ ! -d ${DATA_DIR} ] ; then
- eerror "Directory not found: ${DATA_DIR}"
- eerror "HINT: Ensure that DATA_DIR points to the right path."
- eerror "HINT: Or perhaps you need to create the database cluster:"
- eerror " emerge --config dev-db/postgresql-server:9.1"
- return 1
- fi
-
- # Check for the existence of PostgreSQL's config files, and set the
- # proper mode and ownership.
- # Only three files should be checked as potentially other files
- # may be in PGDATA that should not be touched.
- local file
- for file in postgresql pg_hba pg_ident ; do
- file="${PGDATA%/}/${file}.conf"
- if [ -f ${file} ] ; then
- checkpath -f -m 0600 -o postgres:postgres ${file}
- else
- eerror "${file} not found"
- eerror "HINT: mv ${DATA_DIR%/}/*.conf ${PGDATA}"
- return 1
- fi
- done
-
- # Set the proper permission for the socket path and create it if
- # it doesn't exist.
- checkpath -d -m 0770 -o postgres:postgres ${socket_path}
- if [ -e ${socket_path%/}/.s.PGSQL.${configured_port} ] ; then
- eerror "Socket conflict."
- eerror "A server is already listening on:"
- eerror " ${socket_path%/}/.s.PGSQL.${configured_port}"
- eerror "HINT: Change PGPORT to listen on a different socket."
- return 1
- fi
-}
-
-start() {
- checkconfig || return 1
-
- ebegin "Starting PostgreSQL"
-
- rm -f ${DATA_DIR%/}/postmaster.pid
-
- local extraenv
- local x
- for x in ${PG_EXTRA_ENV} ; do
- extraenv="${extraenv} --env ${x}"
- done
-
- start-stop-daemon --start \
- --user postgres \
- --exec /usr/lib/postgresql-9.1/bin/postgres \
- --env "PGPORT=${configured_port}" \
- ${extraenv} \
- --wait $((${START_TIMEOUT}*1000)) \
- --pidfile ${DATA_DIR%/}/postmaster.pid \
- -- -D ${PGDATA} --data-directory=${DATA_DIR} --silent-mode=true ${PGOPTS}
- local retval=$?
-
- if [ $retval -ne 0 ] ; then
- eerror "Check the log for a possible explanation of the above error."
- eerror " ${DATA_DIR%/}/postmaster.log"
- eend $retval
- return $retval
- fi
-
- eend $retval
-}
-
-stop() {
- local seconds=$(( ${NICE_TIMEOUT} + ${RUDE_TIMEOUT} + ${FORCE_TIMEOUT} ))
- ebegin "Stopping PostgreSQL (this can take up to ${seconds} seconds)"
-
- local retval
- local retries=SIGTERM/${NICE_TIMEOUT}
-
- if [ "${RUDE_QUIT}" != "NO" ] ; then
- einfo "RUDE_QUIT enabled."
- retries="${retries}/SIGINT/${RUDE_TIMEOUT}"
- fi
- if [ "${FORCE_QUIT}" = "YES" ] ; then
- einfo "FORCE_QUIT enabled."
- ewarn "A recover-run might be executed on next startup."
- retries="${retries}/SIGQUIT/${FORCE_TIMEOUT}"
- fi
-
- # Loops through nice, rude, and force quit in one go.
- start-stop-daemon --stop \
- --exec /usr/lib/postgresql-9.1/bin/postgres \
- --retry ${retries} \
- --pidfile ${DATA_DIR%/}/postmaster.pid
-
- eend
-}
-
-reload() {
- ebegin "Reloading PostgreSQL configuration"
- kill -HUP $(head -n1 ${DATA_DIR%/}/postmaster.pid)
- eend $?
-}
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+extra_started_commands="reload"
+
+get_config() {
+ [ -f ${PGDATA%/}/postgresql.conf ] || return 1
+
+ eval echo $(sed -e 's:#.*::' ${PGDATA%/}/postgresql.conf | awk '$1 == "'$1'" { print ($2 == "=" ? $3 : $2) }')
+}
+
+depend() {
+ use net
+ provide postgresql
+
+ if [ "$(get_config log_destination)" = "syslog" ]; then
+ need logger
+ fi
+}
+
+configured_port=$(get_config port)
+: ${configured_port:=${PGPORT}}
+socket_path=$(get_config unix_socket_directory)
+: ${socket_path:=/run/postgresql}
+
+checkconfig() {
+ # Check that DATA_DIR has been set
+ if [ -z ${DATA_DIR} ] ; then
+ eerror "DATA_DIR not set"
+ eerror "HINT: Perhaps you need to update /etc/conf.d/postgresql-9.2"
+ return 1
+ fi
+
+ # Check that DATA_DIR exists
+ if [ ! -d ${DATA_DIR} ] ; then
+ eerror "Directory not found: ${DATA_DIR}"
+ eerror "HINT: Ensure that DATA_DIR points to the right path."
+ eerror "HINT: Or perhaps you need to create the database cluster:"
+ eerror " emerge --config dev-db/postgresql-server:9.2"
+ return 1
+ fi
+
+ # Check for the existence of PostgreSQL's config files, and set the
+ # proper mode and ownership.
+ # Only three files should be checked as potentially other files
+ # may be in PGDATA that should not be touched.
+ local file
+ for file in postgresql pg_hba pg_ident ; do
+ file="${PGDATA%/}/${file}.conf"
+ if [ -f ${file} ] ; then
+ checkpath -f -m 0600 -o postgres:postgres ${file}
+ else
+ eerror "${file} not found"
+ eerror "HINT: mv ${DATA_DIR%/}/*.conf ${PGDATA}"
+ return 1
+ fi
+ done
+
+ # Set the proper permission for the socket path and create it if
+ # it doesn't exist.
+ checkpath -d -m 0770 -o postgres:postgres ${socket_path}
+ if [ -e ${socket_path%/}/.s.PGSQL.${configured_port} ] ; then
+ eerror "Socket conflict."
+ eerror "A server is already listening on:"
+ eerror " ${socket_path%/}/.s.PGSQL.${configured_port}"
+ eerror "HINT: Change PGPORT to listen on a different socket."
+ return 1
+ fi
+}
+
+start() {
+ checkconfig || return 1
+
+ ebegin "Starting PostgreSQL"
+
+ rm -f ${DATA_DIR%/}/postmaster.pid
+
+ local extraenv
+ local x
+ for x in ${PG_EXTRA_ENV} ; do
+ extraenv="${extraenv} --env ${x}"
+ done
+
+ start-stop-daemon --start \
+ --user postgres \
+ --env "PGPORT=${configured_port}" \
+ ${extraenv} \
+ --pidfile ${DATA_DIR%/}/postmaster.pid \
+ --exec /usr/lib/postgresql-9.2/bin/pg_ctl \
+ -- start -s -w -t ${START_TIMEOUT} -l ${DATA_DIR%/}/postmaster.log \
+ -D ${PGDATA} -o "--data-directory=${DATA_DIR} ${PGOPTS}"
+ local retval=$?
+
+ if [ $retval -ne 0 ] ; then
+ eerror "Check the log for a possible explanation of the above error."
+ eerror " ${DATA_DIR%/}/postmaster.log"
+ eend $retval
+ return $retval
+ fi
+
+ eend $retval
+}
+
+stop() {
+ local seconds=$(( ${NICE_TIMEOUT} + ${RUDE_TIMEOUT} + ${FORCE_TIMEOUT} ))
+ ebegin "Stopping PostgreSQL (this can take up to ${seconds} seconds)"
+
+ local retval
+ local retries=SIGTERM/${NICE_TIMEOUT}
+
+ if [ "${RUDE_QUIT}" != "NO" ] ; then
+ einfo "RUDE_QUIT enabled."
+ retries="${retries}/SIGINT/${RUDE_TIMEOUT}"
+ fi
+ if [ "${FORCE_QUIT}" = "YES" ] ; then
+ einfo "FORCE_QUIT enabled."
+ ewarn "A recover-run might be executed on next startup."
+ retries="${retries}/SIGQUIT/${FORCE_TIMEOUT}"
+ fi
+
+ # Loops through nice, rude, and force quit in one go.
+ start-stop-daemon --stop \
+ --exec /usr/lib/postgresql-9.2/bin/postgres \
+ --retry ${retries} \
+ --pidfile ${DATA_DIR%/}/postmaster.pid
+
+ eend
+}
+
+reload() {
+ ebegin "Reloading PostgreSQL configuration"
+ kill -HUP $(head -n1 ${DATA_DIR%/}/postmaster.pid)
+ eend $?
+}
[ -e /proc/filesystems ] || return 0
- # Check what USB fs the kernel support. Currently
- # 2.5+ kernels, and later 2.4 kernels have 'usbfs',
- # while older kernels have 'usbdevfs'.
- if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
- local usbfs=$(grep -Fow usbfs /proc/filesystems ||
- grep -Fow usbdevfs /proc/filesystems)
- if [ -n "$usbfs" ]; then
- ebegin "Mounting USB device filesystem [$usbfs]"
- local usbgid="$(getent group usb | \
- sed -e 's/.*:.*:\(.*\):.*/\1/')"
- mount -t $usbfs \
- -o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
- usbfs /proc/bus/usb
- eend $?
- fi
- fi
-
# Setup Kernel Support for miscellaneous Binary Formats
if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
if grep -qs binfmt_misc /proc/filesystems; then
ebegin "Loading custom binary format handlers"
fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
/run/binfmt.d/*.conf \
- "/etc"/binfmt.d/*.conf \
+ /etc/binfmt.d/*.conf \
""/usr/lib/binfmt.d/*.conf)
if [ -n "${fmts}" ]; then
echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
fi
fi
+ [ "$RC_SYS" = "OPENVZ" ] && return 0
+
+ # Check what USB fs the kernel support. Currently
+ # 2.5+ kernels, and later 2.4 kernels have 'usbfs',
+ # while older kernels have 'usbdevfs'.
+ if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
+ local usbfs=$(grep -Fow usbfs /proc/filesystems ||
+ grep -Fow usbdevfs /proc/filesystems)
+ if [ -n "$usbfs" ]; then
+ ebegin "Mounting USB device filesystem [$usbfs]"
+ local usbgid="$(getent group usb | \
+ sed -e 's/.*:.*:\(.*\):.*/\1/')"
+ mount -t $usbfs \
+ -o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
+ usbfs /proc/bus/usb
+ eend $?
+ fi
+ fi
+
# Setup Kernel Support for SELinux
if [ -d /selinux ] && ! mountinfo -q /selinux; then
if grep -qs selinuxfs /proc/filesystems; then
start()
{
case ",$(fstabinfo -o /)," in
- *,ro,*) return 0;;
+ *,ro,*)
+ ;;
+ *)
+ # Check if the rootfs isn't already writable.
+ if checkpath -W /; then
+ rm -f /fastboot /forcefsck
+ else
+ ebegin "Remounting root filesystem read/write"
+ case "$RC_UNAME" in
+ Linux)
+ mount -n -o remount,rw /
+ ;;
+ *)
+ mount -u -o rw /
+ ;;
+ esac
+ eend $? "Root filesystem could not be mounted read/write"
+ if [ $? -eq 0 ]; then
+ rm -f /fastboot /forcefsck
+ fi
+ fi
+ ;;
esac
- if echo 2>/dev/null >/.test.$$; then
- rm -f /.test.$$ /fastboot /forcefsck
- return 0
- fi
-
- ebegin "Remounting root filesystem read/write"
- case "$RC_UNAME" in
- Linux) mount -n -o remount,rw /;;
- *) mount -u -o rw /;;
- esac
- if eend $? "Root filesystem could not be mounted read/write"; then
- rm -f /fastboot /forcefsck
- fi
+ ebegin "Remounting filesystems"
+ local mountpoint
+ for mountpoint in $(fstabinfo); do
+ case "${mountpoint}" in
+ /)
+ ;;
+ /*)
+ mountinfo -q "${mountpoint}" && \
+ fstabinfo --remount "${mountpoint}"
+ ;;
+ esac
+ done
+ eend 0
}
return 1
fi
fi
+ if ! checkpath -W "$RC_LIBEXECDIR"; then
+ ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
+ if ! yesno "${RC_GOINGDOWN}"; then
+ ewarn "Unable to save deptree cache"
+ return 1
+ fi
+ return 0
+ fi
ebegin "Saving dependency cache"
local rc=
if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
+++ /dev/null
-#!/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-# This script was inspired by the equivalent rc.d staticroute from NetBSD.
-
-description="Configures static routes."
-__nl="
-"
-
-depend()
-{
- provide net
- use network
- keyword -jail -prefix -vserver
-}
-
-pre_flight_checks()
-{
- route=route
- [ -s /etc/route.conf ] && return 0
-
- if [ -n "$staticiproute" ]; then
- route="ip route"
- staticroute="$staticiproute"
- fi
-}
-
-dump_args()
-{
- # Route configuration file, as used by the NetBSD RC system
- if [ -s /etc/route.conf ]; then
- cat /etc/route.conf
- return $?
- fi
-
- case "$staticroute" in
- *"$__nl"*)
- echo "$staticroute"
- ;;
- *)
- (
- set -o noglob
- IFS=';'; set -- $staticroute
- IFS="$__nl"; echo "$*"
- )
- ;;
- esac
-}
-
-do_routes()
-{
- local xtra= family=
- [ "$RC_UNAME" != Linux ] && xtra=-q
-
- ebegin "$1 static routes"
- eindent
- pre_flight_checks
- dump_args | while read args; do
- [ -z "$args" ] && continue
- case "$args" in
- "#"*)
- ;;
- "+"*)
- [ $2 = "add" ] && eval ${args#*+}
- ;;
- "-"*)
- [ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
- ;;
- *)
- veinfo "$args"
- case "$route" in
- "ip route")
- ip route $2 $args
- ;;
- *)
- # Linux route does cannot work it out ...
- if [ "$RC_UNAME" = Linux ]; then
- case "$args" in
- *:*) family="-A inet6";;
- *) family=;;
- esac
- fi
- route $family $xtra $2 -$args
- ;;
- esac
- veend $?
- esac
- done
- eoutdent
- eend 0
-}
-
-start()
-{
- ewarn
- ewarn "The $RC_SVCNAME script is deprecated and will be"
- ewarn "removed in the future."
- ewarn "Please use the net.* scripts to manage your network interfaces."
- ewarn
- do_routes "Adding" "add"
-}
-
-stop()
-{
- local cmd="delete"
- [ "$RC_UNAME" = Linux ] && cmd="del"
- do_routes "Deleting" "$cmd"
-}
depend()
{
- need localmount
+ before localmount
keyword -jail -openvz -prefix -vserver -lxc
}
{
ebegin "Activating swap devices"
case "$RC_UNAME" in
+ Linux) swapon -a -e >/dev/null;;
NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
*) swapon -a >/dev/null;;
esac
ebegin "Deactivating swap devices"
# Try to unmount all tmpfs filesystems not in use, else a deadlock may
- # occure. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+ # occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
cd "$RC_SVCDIR"
umount -a -t tmpfs 2>/dev/null
--- /dev/null
+#!/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+ need localmount
+ keyword -jail -openvz -prefix -vserver -lxc
+}
+
+start()
+{
+ ebegin "Activating additional swap space"
+ case "$RC_UNAME" in
+ NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
+ *) swapon -a >/dev/null;;
+ esac
+ eend 0 # If swapon has nothing todo it errors, so always return 0
+}
+
+stop()
+{
+ ebegin "Deactivating additional swap space"
+
+ # Try to unmount all tmpfs filesystems not in use, else a deadlock may
+ # occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+ # fixme: Do we need this here since we are only unmounting swap files
+ # and loopback swap?
+ cd "$RC_SVCDIR"
+ umount -a -t tmpfs 2>/dev/null
+
+ case "$RC_UNAME" in
+ Linux)
+ if [ -e /proc/swaps ]; then
+ while read filename type rest; do
+ case "$type" in
+ file) swapoff $filename >/dev/null;;
+ esac
+ case "$filename" in
+ /dev/loop*) swapoff $filename >/dev/null;;
+ esac
+ done < /proc/swaps
+ fi
+ ;;
+ esac
+ eend 0
+}
depend()
{
before bootmisc logger
- keyword -prefix -vserver
+ keyword -lxc -prefix -vserver
}
start()
ebegin "Configuring kernel parameters"
eindent
- for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+ for conf in /etc/sysctl.conf /etc/sysctl.d/*.conf; do
if [ -r "$conf" ]; then
vebegin "applying $conf"
- if ! err=$(sysctl -q -p "$conf" 2>&1) ; then
+ if ! err=$(sysctl -p "$conf" 2>&1 >/dev/null) ; then
errs="${errs} ${err}"
- sysctl -q -e -p "${conf}"
+ sysctl -e -p "${conf}" >/dev/null
fi
veend $? || retval=1
fi
depend()
{
- keyword -prefix -vserver
+ keyword -lxc -prefix -vserver
}
mount_sys()
mount_cgroups()
{
- yesno ${rc_cgroups:-YES} && [ -e /proc/cgroups ] && \
mountinfo -q /sys/fs/cgroup || return 0
+ local agent="/lib64/rc/sh/cgroup-release-agent.sh"
+ mkdir /sys/fs/cgroup/openrc
+ mount -n -t cgroup \
+ -o none,nodev,noexec,nosuid,name=openrc,release_agent="$agent" \
+ openrc /sys/fs/cgroup/openrc
+ echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+
+ yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
while read name hier groups enabled rest; do
case "${enabled}" in
1) mkdir /sys/fs/cgroup/${name}
depend()
{
- keyword -openvz -prefix -uml -vserver -xenu
- need root
+ keyword -lxc -openvz -prefix -uml -vserver -xenu
+ use root
after bootmisc
}
done
# Save the encoding for use immediately at boot
- if [ -w "$RC_LIBEXECDIR" ]; then
+ if checkpath -W "$RC_LIBEXECDIR"; then
mkdir -p "$RC_LIBEXECDIR"/console
if yesno ${unicode:-${UNICODE}}; then
echo "" > "$RC_LIBEXECDIR"/console/unicode
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="set up tmpfiles.d entries"
+
+depend()
+{
+ need localmount
+}
+
+start()
+{
+ ebegin "setting up tmpfiles.d entries"
+ /lib64/rc/sh/tmpfiles.sh --create --remove ${tmpfiles_opts}
+ eend $?
+ return 0
+}
depend()
{
need localmount
- keyword -jail -openvz -prefix
+ keyword -jail -lxc -openvz -prefix
}
save_seed()
#!/sbin/runscript
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License, v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/files/xdm.initd-8,v 1.1 2012/05/01 22:08:46 chithanh Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/files/xdm.initd-9,v 1.1 2012/11/11 01:49:30 chithanh Exp $
# This is here to serve as a note to myself, and future developers.
#
PIDFILE=/var/run/kdm.pid
;;
entrance*)
- EXE=/usr/sbin/entranced
- PIDFILE=/var/lib/entranced.pid
+ EXE=/usr/sbin/entrance
+ PIDFILE=/var/run/entrance.pid
;;
gdm|gnome)
EXE=/usr/bin/gdm
/usr/lib/qt4
/usr/lib/postgresql
/usr/lib64/postgresql
-/usr/lib64/postgresql-9.1/lib64/
+/usr/lib64/postgresql-9.2/lib64/
/usr/lib64/sidplay/builders
/usr/lib/sidplay/builders
/usr/games/lib64
soundvision spca50x sq905 st2205 stv0674 stv0680 sx330z template \
topfield toshiba_pdrm11 tp6801"
+LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer nlpsolver \
+ pdfimport scripting-javascript"
+# scripting-beanshell wiki-publisher
+
source /var/lib/layman/make.conf
-install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install ohci_hcd $CMDLINE_OPTS
-install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install uhci_hcd $CMDLINE_OPTS
+softdep uhci_hcd pre: ehci_hcd
+softdep ohci_hcd pre: ehci_hcd
-#$Id: authldap.schema,v 1.9 2009/12/18 04:24:20 mrsam Exp $
#
# OID prefix: 1.3.6.1.4.1.10018
#
app-misc/strigi hyperestraier inotify
app-misc/tomboy galago
-app-office/libreoffice nlpsolver
+app-office/libreoffice nlpsolver pdfimport presenter-console presenter-minimizer scripting-javascript
app-portage/eix optimization strong-optimization
# GO INTO /etc/profile NOT /etc/profile.env
export ANT_HOME='/usr/share/ant'
-export CONFIG_PROTECT='/usr/share/gnupg/qualified.txt /usr/share/config /usr/share/openvpn/easy-rsa'
+export CONFIG_PROTECT='/usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config /usr/share/openvpn/easy-rsa'
export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/env.d/java/ /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild'
export EDITOR='/usr/bin/vim'
export FLTK_DOCDIR='/usr/share/doc/fltk-1.3.0-r1/html'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.4/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+export MULTIOSDIRS='../lib64:../lib32'
export OPENGL_PROFILE='xorg-x11'
export PAGER='/usr/bin/less'
export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.4:/usr/lib64/subversion/bin:/usr/games/bin'
; default-sample-format = s16le
; default-sample-rate = 44100
+; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
.ifexists module-console-kit.so
load-module module-console-kit
.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
### Enable positioned event sounds
load-module module-position-event-sounds
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
#.fail
#.endif
+load-module module-switch-on-port-available
+
### Make some devices default
#set-default-sink output
#set-default-source input
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# consolefont, numlock, etc ...)
rc_tty_number=12
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
-# Generated by net-scripts for interface eth0
+# Hand made by Frank Brehm
domain brehm-online.com
-search home.brehm-online.com home.hennig-berlin.org brehm-online.com hennig-berlin.org uhu-banane.de
-nameserver 10.12.11.1
+search brehm-online.com hennig-berlin.org uhu-banane.de profitbricks.localdomain dc1.de.profitbricks.net dc2.us.profitbricks.net pb.local
+#nameserver 10.12.11.1
+nameserver 192.168.178.30
+nameserver 192.168.178.89
--- /dev/null
+/etc/init.d/swapfiles
\ No newline at end of file
--- /dev/null
+/etc/init.d/tmpfiles.setup
\ No newline at end of file
--- /dev/null
+/etc/init.d/sysfs
\ No newline at end of file
--- /dev/null
+/etc/init.d/udev-mount
\ No newline at end of file
--- /dev/null
+Kernel system variables configuration files
+
+Files found under the /etc/sysctl.d directory that end with .conf are
+parsed within sysctl(8) at boot time. If you want to set kernel variables
+you can either edit /etc/sysctl.conf or make a new file.
+
+The filename isn't important, but don't make it a package name as it may clash
+with something the package builder needs later. The file name must end
+with .conf, or it will not be read.
+
+The recommended location for local system settings is /etc/sysctl.d/local.conf
+but as long as you follow the rules for the name of the file, anything will
+work. see the sysctl.conf(5) man page for details of the format.
projects / config / bruni / etc.git / commitdiff