--- /dev/null
+# /etc/conf.d/dmcrypt
+
+# For people who run dmcrypt on top of some other layer (like raid),
+# use rc_need to specify that requirement. See the runscript(8) man
+# page for more information.
+
+#--------------------
+# Instructions
+#--------------------
+
+# Note regarding the syntax of this file. This file is *almost* bash,
+# but each line is evaluated separately. Separate swaps/targets can be
+# specified. The init-script which reads this file assumes that a
+# swap= or target= line starts a new section, similar to lilo or grub
+# configuration.
+
+# Note when using gpg keys and /usr on a separate partition, you will
+# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
+# and ensure that gpg has been compiled statically.
+# See http://bugs.gentoo.org/90482 for more information.
+
+# Note that the init-script which reads this file detects whether your
+# partition is LUKS or not. No mkfs is run unless you specify a makefs
+# option.
+
+# Global options:
+#----------------
+
+# Max number of checks to perform (1 per second)
+#dmcrypt_max_timeout=120
+
+# Arguments:
+#-----------
+# target=<name> == Mapping name for partition.
+# swap=<name> == Mapping name for swap partition.
+# source='<dev>' == Real device for partition.
+# key='</path/to/keyfile>[:<mode>]' == Fullpath from / or from inside removable media.
+# remdev='<dev>' == Device that will be assigned to removable media.
+# gpg_options='<opts>' == Default are --quiet --decrypt
+# options='<opts>' == cryptsetup, for LUKS you can only use --readonly
+# loop_file='<file>' == Loopback file.
+# pre_mount='cmds' == commands to execute before mounting partition.
+# post_mount='cmds' == commands to execute after mounting partition.
+#-----------
+# Supported Modes
+# gpg == decrypt and pipe key into cryptsetup.
+# Note: new-line character must not be part of key.
+# Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
+
+#--------------------
+# dm-crypt examples
+#--------------------
+
+## swap
+# Swap partitions. These should come first so that no keys make their
+# way into unencrypted swap.
+# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
+# If no makefs is given then mkswap will be assumed
+#swap=crypt-swap
+#source='/dev/hda2'
+
+## /home with passphrase
+#target=crypt-home
+#source='/dev/hda5'
+
+## /home with regular keyfile
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+
+## /home with gpg protected key
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+
+## /home with regular keyfile on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+#remdev='/dev/sda1'
+
+##/home with gpg protected key on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+#remdev='/dev/sda1'
+
+##/tmp with regular keyfile
+#target=crypt-tmp
+#source='/dev/hda6'
+#key='/full/path/to/tmpkey'
+#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
+#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
+
+## Loopback file example
+#mount='crypt-loop-home'
+#source='/dev/loop0'
+#loop_file='/mnt/crypt/home'
--- /dev/null
+<gconfschemafile>
+<schemalist>
+
+<schema>
+ <key>/schemas/apps/cpufreq-applet/prefs/cpu</key>
+ <owner>cpufreq-applet</owner>
+ <type>int</type>
+ <default>0</default>
+ <locale name="C">
+ <short>CPU to Monitor</short>
+ <long>Set the CPU to monitor. In a single processor system you don't have to change it.</long>
+ </locale>
+
+ <locale name="de">
+ <short>Zu überwachender Prozessor</short>
+ <long>Den zu überwachenden Prozessor festlegen. In einem Ein-Prozessorsystem kann dieser Wert nicht geändert werden.</long>
+ </locale>
+
+ <locale name="en_GB">
+ <short>CPU to Monitor</short>
+ <long>Set the CPU to monitor. In a single processor system you don't have to change it.</long>
+ </locale>
+
+ <locale name="ru">
+ <short>Отслеживаемый процессор</short>
+ <long>Устанавливает отслеживаемый процессор. На однопроцессорной системе изменять не надо.</long>
+ </locale>
+
+ <locale name="vi">
+ <short>CPU cần theo dõi</short>
+ <long>Lập CPU cần theo dõi. Trong hệ thống chỉ có một bộ xử lý thì không cần thay đổi điều này.</long>
+ </locale>
+</schema>
+<schema>
+ <key>/schemas/apps/cpufreq-applet/prefs/show_mode</key>
+ <owner>cpufreq-applet</owner>
+ <type>int</type>
+ <default>2</default>
+ <locale name="C">
+ <short>Mode to show cpu usage</short>
+ <long>A 0 value means to show the applet in graphic mode (pixmap only), 1 to show the applet in text mode (not to show the pixmap) and 2 to show the applet in graphic and text mode.</long>
+ </locale>
+
+ <locale name="de">
+ <short>Modus zur Anzeige der Prozessorlast</short>
+ <long>Der Wert 0 bedeutet, dass das Applet im Grafikmodus (nur Bilder), der Wert 1 dass das Applet im Textmodus (ohne Grafiken) und der Wert 2 dass das Applet im Grafik- und Textmodus angezeigt wird.</long>
+ </locale>
+
+ <locale name="en_GB">
+ <short>Mode to show cpu usage</short>
+ <long>A 0 value means to show the applet in graphic mode (pixmap only), 1 to show the applet in text mode (not to show the pixmap) and 2 to show the applet in graphic and text mode.</long>
+ </locale>
+
+ <locale name="ru">
+ <short>Режим показа использования ЦП</short>
+ <long>0 - показывать апплет в графическом режиме (только изображение), 1 - текстовый режим (не показывать изображение), 2 - показывать и текст, и изображение.</long>
+ </locale>
+
+ <locale name="vi">
+ <short>Chế độ cần hiển thị cách dùng CPU</short>
+ <long>Giá trị:
+ • 0 — hiển thi tiểu dụng trong chế độ đồ họa (chỉ ảnh bằng điểm)
+ • 1 — hiển thị tiểu dung trong chế độ chữ (không hiển thị ảnh bằng điểm)
+ • 2 — hiển thị tiểu dụng trong cả hai chế độ đồ họa và chữ đều.</long>
+ </locale>
+</schema>
+<schema>
+ <key>/schemas/apps/cpufreq-applet/prefs/show_text_mode</key>
+ <owner>cpufreq-applet</owner>
+ <type>int</type>
+ <default>1</default>
+ <locale name="C">
+ <short>The type of text to display (if the text is enabled).</short>
+ <long>A 0 value means to show cpu frequency, 1 to show frequency and units, and 2 to show percentage instead of frequency.</long>
+ </locale>
+
+ <locale name="de">
+ <short>Die Art des anzuzeigenden Textes (falls der Text aktiviert ist).</short>
+ <long>Der Wert 0 bedeutet, dass der Prozessortakt angezeigt wird, der Wert 1 dass der Takt und die Einheiten angezeigt und der Wert 2 dass ein Prozentwert anstatt des Taktes angezeigt wird.</long>
+ </locale>
+
+ <locale name="en_GB">
+ <short>The type of text to display (if the text is enabled).</short>
+ <long>A 0 value means to show cpu frequency, 1 to show frequency and units, and 2 to show percentage instead of frequency.</long>
+ </locale>
+
+ <locale name="ru">
+ <short>Тип отображаемого текста (если текст разрешён).</short>
+ <long>0 - показывать частоту ЦП, 1 - частоту и единицы, 2 - проценты вместо частоты.</long>
+ </locale>
+
+ <locale name="vi">
+ <short>Kiểu chữ cần hiển thị (nếu chữ được bật).</short>
+ <long>Giá trị:
+ • 0 — hiển thị tần số CPU
+ • 1 — hiển thị tần số và đơn vi đều
+ • 2 — hiển thị phần trăm thay thế tần số.</long>
+ </locale>
+</schema>
+
+</schemalist>
+</gconfschemafile>
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/cryptsetup/files/dmcrypt.rc,v 1.4 2012/05/11 08:33:01 vapier Exp $
+
+depend() {
+ before checkfs fsck
+}
+
+# We support multiple dmcrypt instances based on $SVCNAME
+execute_hook="dm_crypt_execute_dmcrypt"
+# XXX: Should we drop this ?
+# execute_hook="dm_crypt_execute_localmount"
+conf_file="/etc/conf.d/${SVCNAME}"
+
+# Get splash helpers if available.
+if [ -e /sbin/splash-functions.sh ] ; then
+ . /sbin/splash-functions.sh
+fi
+
+# Setup mappings for an individual target/swap
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_dmcrypt() {
+ local dev ret mode foo
+
+ if [ -n "${target}" ] ; then
+ # let user set options, otherwise leave empty
+ : ${options:=' '}
+ elif [ -n "${swap}" ] ; then
+ if cryptsetup isLuks ${source} 2>/dev/null ; then
+ ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup."
+ return
+ fi
+ target=${swap}
+ # swap contents do not need to be preserved between boots, luks not required.
+ # suspend2 users should have initramfs's init handling their swap partition either way.
+ : ${options:='-c aes -h sha1 -d /dev/urandom'}
+ : ${pre_mount:='mkswap ${dev}'}
+ else
+ return
+ fi
+ if [ -z "${source}" ] && [ ! -e "${source}" ] ; then
+ ewarn "source \"${source}\" for ${target} missing, skipping..."
+ return
+ fi
+
+ if [ -n "${loop_file}" ] ; then
+ dev="/dev/mapper/${target}"
+ ebegin " Setting up loop device ${source}"
+ losetup ${source} ${loop_file}
+ fi
+
+ # cryptsetup:
+ # luksOpen <device> <name> # <device> is $source
+ # create <name> <device> # <name> is $target
+ local arg1="create" arg2="${target}" arg3="${source}" luks=0
+
+ cryptsetup isLuks ${source} 2>/dev/null && { arg1="luksOpen"; arg2="${source}"; arg3="${target}"; luks=1; }
+
+ # Older versions reported:
+ # ${target} is active:
+ # Newer versions report:
+ # ${target} is active[ and is in use.]
+ if cryptsetup status ${target} | egrep -q ' is active' ; then
+ einfo "dm-crypt mapping ${target} is already configured"
+ return
+ fi
+ splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
+
+ # Handle keys
+ if [ -n "${key}" ] ; then
+ read_abort() {
+ # some colors
+ local ans savetty resettty
+ [ -z "${NORMAL}" ] && eval $(eval_ecolors)
+ einfon " $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) "
+ shift
+ # This is ugly as s**t. But POSIX doesn't provide `read -t`, so
+ # we end up having to implement our own crap with stty/etc...
+ savetty=$(stty -g)
+ resettty='stty ${savetty}; trap - EXIT HUP INT TERM'
+ trap 'eval "${resettty}"' EXIT HUP INT TERM
+ stty -icanon
+ [ "${1}" = -t ] && stty min 0 time "$(( $2 * 10 ))"
+ ans=$(dd count=1 bs=1 2>/dev/null) || ans=''
+ eval "${resettty}"
+ if [ -z "${ans}" ] ; then
+ printf '\r'
+ else
+ echo
+ fi
+ case ${ans} in
+ [yY]) return 0;;
+ *) return 1;;
+ esac
+ }
+
+ # Notes: sed not used to avoid case where /usr partition is encrypted.
+ mode=${key/*:/} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg
+ key=${key/:*/}
+ case "${mode}" in
+ gpg|reg)
+ # handle key on removable device
+ if [ -n "${remdev}" ] ; then
+ # temp directory to mount removable device
+ local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$"
+ if [ ! -d "${mntrem}" ] ; then
+ if ! mkdir -p "${mntrem}" ; then
+ ewarn "${source} will not be decrypted ..."
+ einfo "Reason: Unable to create temporary mount point '${mntrem}'"
+ return
+ fi
+ fi
+ i=0
+ einfo "Please insert removable device for ${target}"
+ while [ ${i} -lt ${dmcrypt_max_timeout:-120} ] ; do
+ foo=""
+ if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then
+ # keyfile exists?
+ if [ ! -e "${mntrem}${key}" ] ; then
+ umount -n "${mntrem}"
+ rmdir "${mntrem}"
+ einfo "Cannot find ${key} on removable media."
+ read_abort "Abort" ${read_timeout:--t 1} && return
+ else
+ key="${mntrem}${key}"
+ break
+ fi
+ else
+ [ -e "${remdev}" ] \
+ && foo="mount failed" \
+ || foo="mount source not found"
+ fi
+ : $((i += 1))
+ read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return
+ done
+ else # keyfile ! on removable device
+ if [ ! -e "${key}" ] ; then
+ ewarn "${source} will not be decrypted ..."
+ einfo "Reason: keyfile ${key} does not exist."
+ return
+ fi
+ fi
+ ;;
+ *)
+ ewarn "${source} will not be decrypted ..."
+ einfo "Reason: mode ${mode} is invalid."
+ return
+ ;;
+ esac
+ else
+ mode=none
+ fi
+ ebegin " ${target} using: ${options} ${arg1} ${arg2} ${arg3}"
+ if [ "${mode}" = "gpg" ] ; then
+ : ${gpg_options:='-q -d'}
+ # gpg available ?
+ if type -p gpg >/dev/null ; then
+ for i in 0 1 2 ; do
+ # paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
+ # save stdin stdout stderr "values"
+ gpg ${gpg_options} ${key} 2>/dev/null | cryptsetup ${options} ${arg1} ${arg2} ${arg3}
+ ret=$?
+ [ ${ret} -eq 0 ] && break
+ done
+ eend ${ret} "failure running cryptsetup"
+ else
+ ewarn "${source} will not be decrypted ..."
+ einfo "Reason: cannot find gpg application."
+ einfo "You have to install app-crypt/gnupg first."
+ einfo "If you have /usr on its own partition, try copying gpg to /bin ."
+ fi
+ else
+ if [ "${mode}" = "reg" ] ; then
+ cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3}
+ ret=$?
+ eend ${ret} "failure running cryptsetup"
+ else
+ cryptsetup ${options} ${arg1} ${arg2} ${arg3}
+ ret=$?
+ eend ${ret} "failure running cryptsetup"
+ fi
+ fi
+ if [ -d "${mntrem}" ] ; then
+ umount -n ${mntrem} 2>/dev/null >/dev/null
+ rmdir ${mntrem} 2>/dev/null >/dev/null
+ fi
+ splash svc_input_end ${SVCNAME} >/dev/null 2>&1
+
+ if [ ${ret} -ne 0 ] ; then
+ cryptfs_status=1
+ else
+ if [ -n "${pre_mount}" ] ; then
+ dev="/dev/mapper/${target}"
+ ebegin " pre_mount: ${pre_mount}"
+ eval "${pre_mount}" > /dev/null
+ ewend $? || cryptfs_status=1
+ fi
+ fi
+}
+
+# Run any post_mount commands for an individual mount
+#
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_localmount() {
+ local mount_point
+
+ [ -z "${target}" ] && [ -z "${post_mount}" ] && return
+
+ if ! cryptsetup status ${target} | egrep -q '\<active:' ; then
+ ewarn "Skipping unmapped target ${target}"
+ cryptfs_status=1
+ return
+ fi
+
+ mount_point=$(grep "/dev/mapper/${target}" /proc/mounts | cut -d' ' -f2)
+ if [ -z "${mount_point}" ] ; then
+ ewarn "Failed to find mount point for ${target}, skipping"
+ cryptfs_status=1
+ fi
+
+ if [ -n "${post_mount}" ] ; then
+ ebegin "Running post_mount commands for target ${target}"
+ eval "${post_mount}" >/dev/null
+ eend $? || cryptfs_status=1
+ fi
+}
+
+# Lookup optional bootparams
+get_bootparam_val() {
+ # We're given something like:
+ # foo=bar=cow
+ # Return the "bar=cow" part.
+ case $1 in
+ *\=*)
+ local key=$(echo "$1" | cut -f1 -d=)
+ echo "$1" | cut -c $(( ${#key} + 2 ))
+ ;;
+ esac
+}
+
+start() {
+ local header=true cryptfs_status=0
+ local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
+
+ local x
+ for x in $(cat /proc/cmdline) ; do
+ case "${x}" in
+ key_timeout\=*)
+ local KEY_TIMEOUT=$(get_bootparam_val "${x}")
+ if [ ${KEY_TIMEOUT} -gt 0 ] ; then
+ read_timeout="-t ${KEY_TIMEOUT}"
+ fi
+ ;;
+ esac
+ done
+
+ while read -u 3 targetline ; do
+ case ${targetline} in
+ # skip comments and blank lines
+ ""|"#"*) continue ;;
+ # skip service-specific openrc configs #377927
+ rc_*) continue ;;
+ esac
+
+ ${header} && ebegin "Setting up dm-crypt mappings"
+ header=false
+
+ # check for the start of a new target/swap
+ case ${targetline} in
+ target=*|swap=*)
+ # If we have a target queued up, then execute it
+ ${execute_hook}
+
+ # Prepare for the next target/swap by resetting variables
+ unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
+ ;;
+
+ gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
+ if [ -z "${target}${swap}" ] ; then
+ ewarn "Ignoring setting outside target/swap section: ${targetline}"
+ continue
+ fi
+ ;;
+
+ dmcrypt_max_timeout=*)
+ # ignore global options
+ continue
+ ;;
+
+ *)
+ ewarn "Skipping invalid line in ${conf_file}: ${targetline}"
+ ;;
+ esac
+
+ # Queue this setting for the next call to dm_crypt_execute_xxx
+ eval "${targetline}"
+ done 3< ${conf_file}
+
+ # If we have a target queued up, then execute it
+ ${execute_hook}
+
+ ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
+}
+
+stop() {
+ local line header
+
+ # Break down all mappings
+ header=true
+ egrep "^(target|swap)=" ${conf_file} | \
+ while read line ; do
+ ${header} && einfo "Removing dm-crypt mappings"
+ header=false
+
+ target= swap=
+ eval ${line}
+
+ [ -n "${swap}" ] && target=${swap}
+ if [ -z "${target}" ] ; then
+ ewarn "invalid line in ${conf_file}: ${line}"
+ continue
+ fi
+
+ ebegin " ${target}"
+ cryptsetup remove ${target}
+ eend $?
+ done
+
+ # Break down loop devices
+ header=true
+ grep '^source=./dev/loop' ${conf_file} | \
+ while read line ; do
+ ${header} && einfo "Detaching dm-crypt loop devices"
+ header=false
+
+ source=
+ eval ${line}
+
+ ebegin " ${source}"
+ losetup -d "${source}"
+ eend $?
+ done
+
+ return 0
+}
projects / config / bruni / etc.git / commitdiff