maybe chmod 0600 'config-archive/etc/ssh/sshd_config.1'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.2'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.3'
+maybe chmod 0600 'config-archive/etc/ssh/sshd_config.4'
maybe chmod 0600 'config-archive/etc/ssh/sshd_config.dist'
maybe chmod 0755 'config-archive/etc/ssl'
maybe chmod 0755 'config-archive/etc/ssl/certs'
maybe chmod 0440 'config-archive/etc/sudoers'
maybe chmod 0644 'config-archive/etc/sudoers,v'
maybe chmod 0440 'config-archive/etc/sudoers.1'
+maybe chmod 0440 'config-archive/etc/sudoers.2'
maybe chmod 0440 'config-archive/etc/sudoers.dist'
maybe chmod 0644 'config-archive/etc/sysctl.conf,v'
maybe chmod 0755 'config-archive/etc/syslog-ng'
-# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
+# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# Authentication:
#LoginGraceTime 2m
-#PermitRootLogin yes
+#PermitRootLogin no
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
-ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
+#UseDNS no
+#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
-# $OpenBSD$
+# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
-# "key type names" for X.509 certificates with RSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
-
-# "key type names" for X.509 certificates with DSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
-#X509KeyAlgorithm x509v3-sign-dss,dss-raw
-
-# The intended use for the X509 client certificate. Without this option
-# no chain verification will be done. Currently accepted uses are case
-# insensitive:
-# - "sslclient", "SSL client", "SSL_client" or "client"
-# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
-# - "skip" or ""(empty): don`t check purpose.
-#AllowedCertPurpose sslclient
-
-# Specifies whether self-issued(self-signed) X.509 certificate can be
-# allowed only by entry in AutorizedKeysFile that contain matching
-# public key or certificate blob.
-#KeyAllowSelfIssued no
-
-# Specifies whether CRL must present in store for all certificates in
-# certificate chain with atribute "cRLDistributionPoints"
-#MandatoryCRL no
-
-# A file with multiple certificates of certificate signers
-# in PEM format concatenated together.
-#CACertificateFile /etc/ssh/ca/ca-bundle.crt
-
-# A directory with certificates of certificate signers.
-# The certificates should have name of the form: [HASH].[NUMBER]
-# or have symbolic links to them of this form.
-#CACertificatePath /etc/ssh/ca/crt
-
-# A file with multiple CRL of certificate signers
-# in PEM format concatenated together.
-#CARevocationFile /etc/ssh/ca/ca-bundle.crl
-
-# A directory with CRL of certificate signers.
-# The CRL should have name of the form: [HASH].r[NUMBER]
-# or have symbolic links to them of this form.
-#CARevocationPath /etc/ssh/ca/crl
-
-# LDAP protocol version.
-# Example:
-# CAldapVersion 2
-
-# Note because of OpenSSH options parser limitation
-# use %3D instead of = !
-# LDAP initialization may require URL to be escaped, i.e.
-# use %2C instead of ,(comma). Escaped URL don't depend from
-# LDAP initialization method.
-# Example:
-# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
-
-# SSH can use "Online Certificate Status Protocol"(OCSP)
-# to validate certificate. Set VAType to
-# - none : do not use OCSP to validate certificates;
-# - ocspcert: validate only certificates that specify `OCSP
-# Service Locator' URL;
-# - ocspspec: use specified in the configuration 'OCSP Responder'
-# to validate all certificates.
-#VAType none
-
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# no default banner path
#Banner none
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# the following are HPN related configuration options
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-
+
# disable hpn performance boosts
#HPNDisabled no
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
+#PermitTTY yes
PrintMotd no
PrintLastLog no
#TCPKeepAlive yes
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
+# PermitTTY no
# ForceCommand cvs server
# Allow client to pass locale environment variables #367017
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
# "key type names" for X.509 certificates with DSA key
# Note first defined is used in signature operations!
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
+# Ciphers and keying
+#RekeyLimit default none
+
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
-#LogLevel DEBUG
# Authentication:
# but this is overridden so installations will only check .ssh/authorized_keys
#AuthorizedKeysFile .ssh/authorized_keys
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
PrintLastLog no
#TCPKeepAlive yes
#UseLogin no
-#UsePrivilegeSeparation yes
+UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
-#MaxStartups 10
+#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
+#VersionAddendum none
# no default banner path
#Banner none
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-# allow the use of the none cipher
-#NoneEnabled no
-
-# disable hpn performance boosts.
+# disable hpn performance boosts
#HPNDisabled no
# buffer size for hpn to non-hpn connections
#HPNBufferSize 2048
+# allow the use of the none cipher
+#NoneEnabled no
+
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
--- /dev/null
+# $OpenBSD$
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+
+# "key type names" for X.509 certificates with RSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+
+# "key type names" for X.509 certificates with DSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
+#X509KeyAlgorithm x509v3-sign-dss,dss-raw
+
+# The intended use for the X509 client certificate. Without this option
+# no chain verification will be done. Currently accepted uses are case
+# insensitive:
+# - "sslclient", "SSL client", "SSL_client" or "client"
+# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
+# - "skip" or ""(empty): don`t check purpose.
+#AllowedCertPurpose sslclient
+
+# Specifies whether self-issued(self-signed) X.509 certificate can be
+# allowed only by entry in AutorizedKeysFile that contain matching
+# public key or certificate blob.
+#KeyAllowSelfIssued no
+
+# Specifies whether CRL must present in store for all certificates in
+# certificate chain with atribute "cRLDistributionPoints"
+#MandatoryCRL no
+
+# A file with multiple certificates of certificate signers
+# in PEM format concatenated together.
+#CACertificateFile /etc/ssh/ca/ca-bundle.crt
+
+# A directory with certificates of certificate signers.
+# The certificates should have name of the form: [HASH].[NUMBER]
+# or have symbolic links to them of this form.
+#CACertificatePath /etc/ssh/ca/crt
+
+# A file with multiple CRL of certificate signers
+# in PEM format concatenated together.
+#CARevocationFile /etc/ssh/ca/ca-bundle.crl
+
+# A directory with CRL of certificate signers.
+# The CRL should have name of the form: [HASH].r[NUMBER]
+# or have symbolic links to them of this form.
+#CARevocationPath /etc/ssh/ca/crl
+
+# LDAP protocol version.
+# Example:
+# CAldapVersion 2
+
+# Note because of OpenSSH options parser limitation
+# use %3D instead of = !
+# LDAP initialization may require URL to be escaped, i.e.
+# use %2C instead of ,(comma). Escaped URL don't depend from
+# LDAP initialization method.
+# Example:
+# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
+
+# SSH can use "Online Certificate Status Protocol"(OCSP)
+# to validate certificate. Set VAType to
+# - none : do not use OCSP to validate certificates;
+# - ocspcert: validate only certificates that specify `OCSP
+# Service Locator' URL;
+# - ocspspec: use specified in the configuration 'OCSP Responder'
+# to validate all certificates.
+#VAType none
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+#LogLevel DEBUG
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/misc/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts.
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
-# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
+# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# Authentication:
#LoginGraceTime 2m
-#PermitRootLogin no
+#PermitRootLogin prohibit-password
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
## Groups of commands. Often used to group related commands together.
# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
# /usr/bin/pkill, /usr/bin/top
+# Cmnd_Alias REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff
##
## Defaults specification
# Defaults log_output
# Defaults!/usr/bin/sudoreplay !log_output
# Defaults!/usr/local/bin/sudoreplay !log_output
-# Defaults!/sbin/reboot !log_output
+# Defaults!REBOOT !log_output
##
## Runas alias specification
## Uncomment to allow members of group wheel to execute any command
%wheel ALL=(ALL) ALL
%root ALL=(ALL) NOPASSWD: ALL
+nagios ALL=(ALL) NOPASSWD: ALL
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
--- /dev/null
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users. These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands. Often used to group related commands together.
+# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# /usr/bin/pkill, /usr/bin/top
+
+##
+## Defaults specification
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file. Note that other programs use HOME to find
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods. Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!/sbin/reboot !log_output
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group wheel to execute any command
+%wheel ALL=(ALL) ALL
+%root ALL=(ALL) NOPASSWD: ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo ALL=(ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw # Ask for the password of the target user
+# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
+
+## Read drop-in files from /etc/sudoers.d
+## (the '#' here does not indicate a comment)
+#includedir /etc/sudoers.d
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
##
+## Uncomment to use a hard-coded PATH instead of the user's to find commands
+# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+##
+## Uncomment to send mail if the user does not enter the correct password.
+# Defaults mail_badpass
+##
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
# Defaults log_output
-# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
+# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#LoginGraceTime 2m
#PermitRootLogin no
+#PermitRootLogin prohibit-password
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
## this may allow users to subvert the command being run via sudo.
# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
##
+## Uncomment to use a hard-coded PATH instead of the user's to find commands
+# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+##
+## Uncomment to send mail if the user does not enter the correct password.
+# Defaults mail_badpass
+##
## Uncomment to enable logging of a command's output, except for
## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
# Defaults log_output
projects / config / helga / etc.git / commitdiff