mkdir -p './courier-imap/shared.tmp'
mkdir -p './foomatic/direct'
mkdir -p './gnome-settings-daemon/xrandr'
+mkdir -p './hotplug/pci'
mkdir -p './php/embed-php5.3/ext'
mkdir -p './php/embed-php5.3/ext-active'
mkdir -p './pm/power.d'
maybe chmod 0644 './conf.d/twistd'
maybe chmod 0644 './conf.d/udev'
maybe chmod 0644 './conf.d/urandom'
+maybe chmod 0644 './conf.d/usb'
maybe chmod 0644 './conf.d/wpa_supplicant'
maybe chmod 0644 './conf.d/xdm'
maybe chmod 0644 './conf.d/xinetd'
maybe chmod 0755 './hotplug'
maybe chmod 0755 './hotplug.d'
maybe chmod 0644 './hotplug.d/.keep_sys-apps_hotplug-base-0'
+maybe chmod 0755 './hotplug.d/default'
+maybe chmod 0755 './hotplug.d/default/default.hotplug'
+maybe chmod 0644 './hotplug/blacklist'
+maybe chmod 0755 './hotplug/dasd.agent'
+maybe chmod 0755 './hotplug/dasd.permissions'
+maybe chmod 0755 './hotplug/firmware.agent'
+maybe chmod 0644 './hotplug/hotplug.functions'
+maybe chmod 0755 './hotplug/ieee1394.agent'
+maybe chmod 0755 './hotplug/input.agent'
+maybe chmod 0755 './hotplug/input.rc'
+maybe chmod 0755 './hotplug/isapnp.rc'
+maybe chmod 0755 './hotplug/net.agent'
+maybe chmod 0755 './hotplug/pci'
+maybe chmod 0755 './hotplug/pci.agent'
+maybe chmod 0755 './hotplug/pci.rc'
+maybe chmod 0644 './hotplug/pnp.distmap'
+maybe chmod 0755 './hotplug/pnp.rc'
+maybe chmod 0755 './hotplug/scsi.agent'
+maybe chmod 0755 './hotplug/tape.agent'
+maybe chmod 0755 './hotplug/tape.permissions'
maybe chmod 0755 './hotplug/usb'
+maybe chmod 0755 './hotplug/usb.agent'
+maybe chmod 0644 './hotplug/usb.distmap'
+maybe chmod 0644 './hotplug/usb.handmap'
+maybe chmod 0755 './hotplug/usb.rc'
+maybe chmod 0644 './hotplug/usb.usermap'
maybe chmod 0644 './hotplug/usb/libsane.usermap'
maybe chmod 0755 './hotplug/usb/libusbscanner'
maybe chmod 0755 './hp'
maybe chmod 0755 './init.d/gpm'
maybe chmod 0755 './init.d/gpsd'
maybe chmod 0755 './init.d/hostname'
+maybe chmod 0755 './init.d/hotplug'
maybe chmod 0755 './init.d/hwclock'
maybe chmod 0755 './init.d/ip6tables'
maybe chmod 0755 './init.d/iptables'
--- /dev/null
+# If you have a USB mouse, you probably want to enable the following,
+# and change your XFree86 configuration so that it uses /dev/input/mice
+# as the mouse input device
+#X11_USBMICE_HACK=true
+
+# Put any modules here that you want to be loaded by the USB hotplug system
+#STATIC_MODULE_LIST=
--- /dev/null
+#!/bin/sh
+#
+# This version of /sbin/hotplug should works on most GNU/Linux systems
+# using Linux 2.2.18+ or 2.4.* kernels. On 2.2.*, only USB has such
+# hotplugging support; on 2.4.*, so do PCI/Cardbus and network interfaces.
+#
+# In 2.5, both classes and busses can report hotplug events as part
+# of the driver model core functionality. Plus, /sys/$DEVPATH is
+# available for scripting, as well as the $ACTION being reported.
+#
+# The kernel HOTPLUG configuration option needs to be enabled, and most
+# device drivers will be compiled for MODULES (make allmod).
+#
+#
+# HISTORY:
+#
+# 21-Nov-2002 Optionally log events; 2.5 notes (db)
+# 26-Feb-2001 Cleanup (Gioele Barabucci)
+# 14-Feb-2001 Better diagnostics: logging, agent list (contributors)
+# 04-Jan-2001 First "New" version, which only delegates to
+# specialized hotplug agents.
+#
+# $Id: default.hotplug,v 1.4 2004/09/20 21:40:27 kroah Exp $
+#
+
+exec < /dev/null
+test -t 1 || exec > /dev/null
+test -t 2 || exec 2>&1
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+# DEBUG=yes export DEBUG
+
+debug_mesg "arguments ($*) env (`env`)"
+
+#
+# Only one required argument: event type type being dispatched.
+# Examples: usb, pci, isapnp, net, ieee1394, printer, disk,
+# parport, input, ide, cpu, system, ... with 2.5, lots more.
+# Other parameters are passed in the environment, or positionally
+# through argv.
+#
+if [ $# -lt 1 ] || [ "$1" = "help" ] || [ "$1" = "--help" ]; then
+ if [ -t ]; then
+ echo "Usage: $0 AgentName [AgentArguments]"
+
+ AGENTS=""
+ for AGENT in /etc/hotplug/*.agent ; do
+ TYPE=`basename $AGENT | sed s/.agent//`
+ if [ -x $AGENT ]; then
+ AGENTS="$AGENTS $TYPE"
+ else
+ AGENTS="$AGENTS ($TYPE)"
+ fi
+ done
+ echo "AgentName values on this system: $AGENTS"
+ else
+ mesg "illegal usage $*"
+ fi
+ exit 1
+fi
+
+#
+# Delegate event handling:
+# /sbin/hotplug FOO ..args.. ==> /etc/hotplug/FOO.agent ..args..
+#
+AGENT=/etc/hotplug/$1.agent
+if [ -x $AGENT ]; then
+ shift
+ if [ "$DEBUG" != "" ]; then
+ mesg "invoke $AGENT ($@)"
+ fi
+ exec $AGENT "$@"
+ mesg "couldn't exec $AGENT"
+ exit 1
+fi
+
+debug_mesg "no runnable $AGENT is installed"
+
+#
+# Optionally log events we don't handle directly.
+# Some program or person has asked for $LOG data.
+#
+LOG=/var/log/hotplug/$1.events
+if [ ! -w $LOG ]; then
+ # catch-all for unclaimed events
+ LOG=/var/log/hotplug/events
+fi
+if [ -w $LOG ]; then
+ # record all basic event data
+ HOTPLUG_TYPE=$1
+ shift
+ HOTPLUG_ARGS="$*"
+ export HOTPLUG_ARGS HOTPLUG_TYPE
+
+ # use to tempfile to buffer events
+ # FIXME buffering acts oddly when logging to pipes,
+ # it'd be better not to need a tempfile
+ TMP=$(mktemp /var/log/hotplug/e-$HOTPLUG_TYPE-XXXXXXXX)
+ if [ $? -ne 0 ]; then
+ mesg "couldn't create tempfile for logging"
+ exit 1
+ fi
+
+ debug_mesg "log to $LOG ($HOTPLUG_TYPE $HOTPLUG_ARGS)"
+ log_to_stdout > $TMP
+ cat $TMP >> $LOG
+ rm -f $TMP
+
+ exit 0
+fi
+
+exit 1
--- /dev/null
+#
+# Listing a module here prevents the hotplug scripts from loading it.
+# Usually that'd be so that some other driver will bind it instead,
+# no matter which driver happens to get probed first. Sometimes user
+# mode tools can also control driver binding.
+#
+# Syntax: driver name alone (without any spaces) on a line. Other
+# lines are ignored.
+#
+
+# uhci ... usb-uhci handles the same pci class
+usb-uhci
+# usbcore ... module is loaded implicitly, ignore it otherwise
+usbcore
+
+# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
+de4x5
+# At least 2.4.3 and later xircom_tulip doesn't have that conflict
+# xircom_tulip_cb
+dmfe
+
+#evbug is a debug tool and should be loaded explicitly
+evbug
+
+# Don't hotplug eth1394, bug #128962
+eth1394
+
+shpchp
--- /dev/null
+#!/bin/sh
+#
+# Dasd hotplug policy agent for Linux 2.4 kernels
+#
+# Copyright (c) 2002 SuSE Linux AG, Nuremberg
+#
+# the GNU Public License applies
+#
+# Author: Susanne Oberhauser <froh@suse.de>, 2002
+#
+#
+# Kernel DASD hotplug params include:
+#
+# s390 device address
+: ${DEVNO?Bad DASD invocation: \$DEVNO is not set}
+
+# Linux major and minor
+: ${MAJOR?Bad DASD invocation: \$MAJOR is not set}
+: ${MINOR?Bad DASD invocation: \$MINOR is not set}
+
+# Linux device name (dasda, ...)
+: ${DASDNAME?Bad DASD invocation: \$DASDNAME is not set}
+
+# Hotplug event type (add, remove, partchk or partremove)
+: ${ACTION?Bad DASD invocation: \$ACTION is not set}
+
+#
+# they are generated here: /usr/src/linux/drivers/s390/block/dasd.c
+#
+
+#
+# HISTORY:
+#
+# 2002-08-06 Susanne Oberhauser <froh@suse.de>
+# created script
+
+cd /etc/hotplug
+. hotplug.functions
+
+( test -d /dev/dasd && test -d /dev/labels ) || {
+ debug_mesg "/etc/init.d/boot.dasd_devfs_compat is not started.
+ignoring $ACTION $DEVNO $MAJOR $MINOR $DASDNAME"
+ exit 0
+}
+
+mesg "$ACTION $DEVNO $MAJOR $MINOR $DASDNAME"
+
+
+test -r dasd.permissions && . dasd.permissions || {
+ mesg DASD permission handling not found
+ exit 1
+}
+
+# to preserve the script from doing anything real, call it with
+# CONDOM=echo
+: ${CONDOM=}
+# abort on error or unset variables:
+set -o errexit
+set -o nounset
+
+die() {
+ mesg "$*"
+ exit 1
+}
+
+
+create_node() #
+# environment:
+# TYPE (char, block)
+# NODE (filename including any leading directories)
+# MAJOR, MINOR
+# OWNER (user.group or unset, which means)
+# PERMISSIONS (symbolic or unset, which means minimal settings)
+#
+# when this function exits sucessfully,
+# $NODE exists as $TYPE-device with $MAJOR and $MINOR, belongs to
+# $OWNER and has $PERMISSIONS.
+
+{
+ debug_mesg "create_node $PERMISSIONS $OWNER $MAJOR $MINOR $TYPE $NODE"
+ case "$TYPE" in
+ block|b) TYPE=b;;
+ char|c) TYPE=c;;
+ *) die "create_node: wrong TYPE given"
+ esac
+
+
+ # Don't remove the node, if it has the correct major/minor
+
+ if test -e "$NODE"
+ then
+
+ # if the file exists, check that it is a $TYPE device with the
+ # correct major and minor
+
+ if test -$TYPE "$NODE"
+ then
+ ls -l $NODE | {
+
+ read existing_mode existing_nlink \
+ existing_user existing_group \
+ existing_major existing_minor \
+ dummy
+
+ if test "$existing_major" != "$MAJOR," || test "$existing_minor" != "$MINOR"
+ then
+ # create a new node using the existing
+ # permissions, ownership and timestamp
+ $CONDOM rm -f $NODE
+ $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
+ fi
+ }
+ else
+ # create a new node using the existing
+ # permissions, ownership and timestamp
+ $CONDOM rm -f $NODE
+ $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
+ fi
+ else
+ # TODO?: this does not support missing directories, yet:
+ # if the node does not exist yet, create it
+ $CONDOM mknod --mode="a=" $NODE $TYPE $MAJOR $MINOR
+ fi
+
+ # always set ownership and permissions
+ $CONDOM chown $OWNER $NODE
+ $CONDOM chmod $PERMISSIONS $NODE
+}
+
+
+create_symlink()
+# uses these from the environment:
+# LINK
+# TARGET
+# OWNER (user.group) of the link. Directory components belong to root.root
+# CONDOM
+{
+ debug_mesg "create_symlink $OWNER $LINK -> $TARGET"
+ # first create the directory if necessary:
+ link_dir=$(dirname "$LINK")
+ test -d "$link_dir" || {
+ test -e "$link_dir" && die "$link_dir exists but is not a directory:
+$(ls -l $link_dir)"
+ } || {
+ $CONDOM install --directory --owner=root --group=root "$link_dir"
+ }
+ test -e "$LINK" && rm -rf "$LINK"
+ $CONDOM ln -snf "$TARGET" "$LINK"
+ $CONDOM chown "$OWNER" "$LINK"
+}
+
+case $ACTION in
+ add)
+ export NODE=/dev/$DASDNAME
+ export TYPE=block
+ # get $OWNER and $PERMISSIONS
+ MISC=$DEVNO \
+ dasd_permissions
+ create_node
+ LINK=/dev/dasd/$DEVNO/device TARGET=$NODE \
+ create_symlink
+ LINK=/dev/dasd/$DEVNO/disk TARGET=$NODE \
+ create_symlink
+ ;;
+
+ remove)
+ $CONDOM rm -f /dev/$DASDNAME*
+ VOLSER=$(ls -l /dev/dasd/$DEVNO/VOLSER | sed -e 's,.*-> ,,')
+ $CONDOM rm -rf /dev/dasd/$DEVNO
+ test "${VOLSER}" != "" && $CONDOM rm -f "$VOLSER"
+ ;;
+
+ partchk)
+ export NODE=/dev/$DASDNAME
+ export VOLSER=$(dasdview -j -f $NODE | sed -e 's,[[:space:]]\+$,,')
+ CHECKED_VOLSER=$(
+ echo "$VOLSER" |
+ sed -e '
+ # spaces, slashes, asterisks and questionmarks are no good for filenames
+ s/[ /*?]/ space, slash, asterisk or questionmark /g
+ # nor are nonprinting characters
+ s/[^[:print:]]/ nonprinting characters /g
+ # "." and ".." are evil as well
+ s/^\.$/ dot /
+ s/^\.\.$/ dot dot /
+ '
+ )
+
+ if test "$VOLSER" != "$CHECKED_VOLSER"
+ then
+ mesg "VOLSER label of $NODE is no legal filename: <$VOLSER> -> <$CHECKED_VOLSER> ignoring it."
+ VOLSER=""
+ fi
+
+
+ # If the volser label has changed, this is also notified as a
+ # 'partchk' action. remove the old volser if present and
+ # different from the new one.
+
+ # The VOLSER symlink in the DEVNO directory points to the
+ # VOLSER file for deletion of the VOLSER label after device
+ # removal (the device is no longer available then to query the
+ # VOLSER from there).
+
+ test -e /dev/dasd/$DEVNO/VOLSER && {
+ OLD_VOLSER="$(ls -l /dev/dasd/$DEVNO/VOLSER | sed -e 's,.*-> ,,')"
+ test "$OLD_VOLSER" = "/dev/labels/$VOLSER" || {
+ $CONDOM rm -f "$OLD_VOLSER"
+ }
+ }
+
+ # Get ownership and permissions for the nodes and ownership
+ # for the symlinks:
+
+ MISC=$VOLSER-$DEVNO \
+ dasd_permissions
+ # add the volser symlink if no other dasd uses that volser yet.
+ test "$VOLSER" != "" && test ! -e /dev/labels/"$VOLSER" && {
+ LINK=/dev/labels/"$VOLSER" TARGET=../dasd/$DEVNO \
+ create_symlink
+
+ TARGET=/dev/labels/"$VOLSER" LINK=/dev/dasd/$DEVNO/VOLSER \
+ create_symlink
+ }
+
+ # TODO: for the time being, we ignore /proc/partitions and
+ # create all candidate partitions
+ export TYPE=block
+ for partition in 1 2 3
+ do
+
+ NODE=/dev/$DASDNAME$partition
+
+ # get ownership and permissions for the partition
+ MISC="$VOLSER"-$DEVNO-$partition dasd_permissions
+
+ MINOR=$((MINOR + partition)) create_node
+
+ LINK=/dev/dasd/$DEVNO/part$partition TARGET=$NODE \
+ create_symlink
+ done
+ ;;
+
+ partremove)
+ $CONDOM rm -f /dev/$DASDNAME[123]
+ $CONDOM rm -rf /dev/dasd/$DEVNO/part*
+ ;;
+ *)
+ mesg DASD $ACTION event not supported
+ exit 1 ;;
+esac
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2002 SuSE Linux AG, Nuremberg
+#
+# Author: Susanne Oberhauser <froh@suse.de>, 2002
+#
+# the GNU Public License applies
+#
+
+# modify this function at your heart's:
+dasd_permissions()
+{
+
+ case "$NODE-$MAJOR-$MINOR-$MISC" in
+ # add your special ownership handling here, e.g.
+ #
+ # this feature is experimental, which means it's neither
+ # supported nor maintained: you're on your own.
+ #
+ # /dev/dasd*-*-*-*-ORA*) OWNER=ora.ora; PERMISSIONS="ug=rw,o=";;
+ #
+ /dev/dasd*-*)
+ # default:
+ OWNER=root.disk
+ PERMISSIONS="ug=rw,o="
+ ;;
+ *)
+ die "dasd_permissions: don't know what permissions to give $NODE-$MAJOR-$MINOR-$MISC"
+ esac
+}
--- /dev/null
+#!/bin/sh
+#
+# Firmware-specific hotplug policy agent.
+#
+# Kernel firmware hotplug params include:
+#
+# ACTION=%s [add or remove]
+# DEVPATH=%s [in 2.5 kernels, /sys/$DEVPATH]
+# FIRMWARE=%s
+#
+# HISTORY:
+#
+# 24-Jul-2003 Initial version of "new" hotplug agent.
+#
+# $Id: firmware.agent,v 1.4 2004/09/20 21:23:51 kroah Exp $
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+# DEBUG=yes export DEBUG
+
+# directory of the firmware files
+FIRMWARE_DIR=/lib/firmware
+
+# mountpoint of sysfs
+SYSFS=$(sed -n 's/^.* \([^ ]*\) sysfs .*$/\1/p' /proc/mounts)
+
+# use /proc for 2.4 kernels
+if [ "$SYSFS" = "" ]; then
+ SYSFS=/proc
+fi
+
+#
+# What to do with this firmware hotplug event?
+#
+case "$ACTION" in
+
+add)
+ if [ ! -e $SYSFS/$DEVPATH/loading ]; then
+ sleep 1
+ fi
+
+ if [ -f "$FIRMWARE_DIR/$FIRMWARE" ]; then
+ echo 1 > $SYSFS/$DEVPATH/loading
+ cp "$FIRMWARE_DIR/$FIRMWARE" $SYSFS/$DEVPATH/data
+ echo 0 > $SYSFS/$DEVPATH/loading
+ else
+ echo -1 > $SYSFS/$DEVPATH/loading
+ fi
+
+ ;;
+
+remove)
+ ;;
+
+*)
+ mesg "Firmware '$ACTION' event not supported"
+ exit 1
+ ;;
+
+esac
--- /dev/null
+#
+# Setup and BASH utility functions for use in hotplug agents
+#
+# Most essential parameters are passed from the kernel using
+# environment variables. For more information, see the docs
+# on-line at http://linux-hotplug.sourceforge.net or the
+# sources for each hotplug-aware kernel subsystem.
+#
+# $Id: hotplug.functions,v 1.27 2004/09/20 23:12:07 kroah Exp $
+#
+#
+
+# DEBUG=yes; export DEBUG
+PATH=/bin:/sbin:/usr/sbin:/usr/bin
+
+KERNEL=`uname -r`
+MODULE_DIR=/lib/modules/$KERNEL
+
+HOTPLUG_DIR=/etc/hotplug
+
+if [ -f /etc/sysconfig/hotplug ]; then
+ . /etc/sysconfig/hotplug
+fi
+
+if [ -x /usr/bin/logger ]; then
+ LOGGER=/usr/bin/logger
+elif [ -x /bin/logger ]; then
+ LOGGER=/bin/logger
+else
+ unset LOGGER
+fi
+#
+# for diagnostics
+#
+if [ -t 1 -o -z "$LOGGER" ]; then
+ mesg () {
+ echo "$@"
+ }
+else
+ mesg () {
+ $LOGGER -t $(basename $0)"[$$]" "$@"
+ }
+fi
+
+debug_mesg () {
+ test "$DEBUG" = "" -o "$DEBUG" = no && return
+ mesg "$@"
+}
+
+
+#
+# Not "modprobe --autoclean" ... one driver module can handle many
+# devices. Unloading should be done when no devices are present.
+# Autocleaning happens if none of the devices are open, once any of
+# them gets opened; wrong timing.
+#
+MODPROBE="/sbin/modprobe -s -q"
+#MODPROBE="/sbin/modprobe -vs"
+
+
+####################################################################
+#
+# usage: load_driver type filename description
+#
+# modprobes driver module(s) if appropriate, and optionally
+# invokes a driver-specific setup script (or user-mode driver).
+#
+# the "modules.*map" format file is guaranteed to exist
+#
+load_drivers ()
+{
+ local LOADED TYPE FILENAME DESCRIPTION LISTER
+ DRIVERS=""
+
+ # make this routine more readable
+ TYPE=$1
+ FILENAME=$2
+ DESCRIPTION=$3
+
+ # should we use usbmodules, pcimodules? not on 2.5+, because sysfs
+ # ought to expose the data we need to find all candidate drivers.
+ # (on 2.5.48 it does for usb; but maybe not yet for pci.)
+ case "$KERNEL" in
+ 2.2*|2.3*|2.4*) LISTER=`which ${TYPE}modules` ;;
+ *) LISTER="" ;;
+ esac
+
+ if [ "$LISTER" != "" ]; then
+ # lister programs MIGHT be preferable to parsing from shell scripts:
+ # - usbmodules used for (a) multi-interface devices, (b) coldplug
+ # - pcimodules used only for coldplug
+ case $TYPE in
+ usb)
+ # "usbutils-0.8" (or later) is needed in $PATH
+ # only works if we have usbfs
+ # ... reads more descriptors than are passed in env
+ # ... doesn't handle comment syntax either
+ if [ "$DEVICE" = "" -o ! -f "$DEVICE" ]; then
+ LISTER=
+ else
+ DRIVERS=`$LISTER --mapfile $FILENAME --device $DEVICE`
+ fi ;;
+
+ pci)
+ debug_mesg "pcimodules is scanning more than $PCI_SLOT ..."
+ DRIVERS=`$LISTER`
+ ;;
+ esac
+ fi
+
+ # try parsing by shell scripts if no luck yet
+ if [ "$DRIVERS" = "" ]; then
+ ${TYPE}_map_modules < $FILENAME
+ fi
+
+ # FIXME remove dups and blacklisted modules from $DRIVERS here
+
+ if [ "$DRIVERS" = "" ]; then
+ return
+ fi
+
+ # Note that DRIVERS aren't all going to be modules.
+ # For USB, some user-mode drivers or setup scripts may be listed.
+ debug_mesg Setup $DRIVERS for $DESCRIPTION
+
+ # either kernel or user mode drivers may need to be set up
+ for MODULE in $DRIVERS
+ do
+ # maybe driver modules need loading
+ LOADED=false
+ if ! lsmod | grep -q "^$(echo $MODULE|sed -e 's/-/_/g') " > /dev/null 2>&1; then
+ if grep -q "^$(echo $MODULE|sed -e 's/[-_]/[-_]/g')\$" $HOTPLUG_DIR/blacklist \
+ $HOTPLUG_DIR/blacklist.d/* \
+ >/dev/null 2>&1; then
+ debug_mesg "... blacklisted module: $MODULE"
+ continue
+ fi
+
+ # statically linked modules aren't shown by 'lsmod',
+ # and user mode drivers will ONLY have a setup script;
+ # it's not an error if a module doesn't exist or won't load.
+ if $MODPROBE -n $MODULE >/dev/null 2>&1 &&
+ ! $MODPROBE $MODULE >/dev/null 2>&1 ; then
+ mesg "... can't load module $MODULE"
+ else
+ # /etc/modules.conf may have set non-default module
+ # parameters ... handle per-device parameters in apps
+ # (ioctls etc) not in setup scripts or modules.conf
+ LOADED=true
+ fi
+ else
+ # This module is already loaded
+ LOADED=true
+ fi
+
+ # always run setup scripts after any matching kernel code has had
+ # a chance to do its thing, no matter whether it was dynamically
+ # or statically linked, or if there is only a user mode driver.
+ # the script might re-enumerate usb devices after firmware download,
+ # giving kernel code another chance.
+ if [ -x $HOTPLUG_DIR/$TYPE/$MODULE ]; then
+ debug_mesg Module setup $MODULE for $DESCRIPTION
+ $HOTPLUG_DIR/$TYPE/$MODULE
+ LOADED=true
+ fi
+
+ if [ "$LOADED" = "false" ]; then
+ mesg "missing kernel or user mode driver $MODULE "
+ fi
+ if echo "$MODULE" | grep -q "usb-storage" > /dev/null 2>&1 ; then
+ [ -x /usr/sbin/updfstab ] && /usr/sbin/updfstab
+ fi
+ done
+}
+
+####################################################################
+#
+# usage: log_to_stdout filename
+#
+# writes a copy of the current hotplug event to stdout.
+# add buffering, to avoid interleaving reports!
+#
+log_to_stdout ()
+{
+ if [ -x /bin/date ]; then
+ echo "HOTPLUG_TIME='$(/bin/date)'"
+ fi
+
+ env | egrep -v '^PATH=|^PWD=|^_=|^OLDPWD=|^SHLVL=|^HOME='
+ echo ''
+ # empty line terminates events
+}
+
+# vim:syntax=sh
--- /dev/null
+#!/bin/sh
+#
+# IEEE1394-specific hotplug policy agent.
+#
+# This should handle 2.4.10 (or later) IEEE1394 hotplugging, with a
+# consistent framework for adding device and driver specific treatments.
+#
+# Kernel IEEE1394 params are:
+#
+# ACTION=add or remove
+# VENDOR_ID=24 bit vendor id
+# GUID=64 bit globally unique id
+# SPEFICIER_ID=24 bit id of owner of specification
+# VERSION=version of specification
+#
+# See IEEE1212 for details on these parameters.
+#
+# HISTORY:
+# 26-Mar-2002 Small cleanups to match other .agent files. (gkh)
+# 16-Sept-2001 Initial version from Kristian Hogsberg
+# <hogsberg@users.sourceforge.net> (plus tweaks)
+#
+# $Id: ieee1394.agent,v 1.13 2004/09/20 21:43:37 kroah Exp $
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+# DEBUG=yes export DEBUG
+
+# generated by modutils 2.4.9 or later, for 2.4.10 and later kernels
+MAP_CURRENT=$MODULE_DIR/modules.ieee1394map
+
+# accumulates list of modules we may care about
+DRIVERS=
+
+if [ "$ACTION" = "" ]; then
+ mesg Bad IEEE1394 agent invocation
+ exit 1
+fi
+
+
+device_vendor_id=$((0x$VENDOR_ID))
+device_specifier_id=$((0x$SPECIFIER_ID))
+device_version=$((0x$VERSION))
+
+MATCH_VENDOR_ID=0x0001
+MATCH_SPECIFIER_ID=0x0004
+MATCH_VERSION=0x0008
+
+#
+# stdin is "modules.ieee1394map" syntax
+# on return, all matching modules were added to $DRIVERS
+#
+ieee1394_map_modules ()
+{
+ # comment line lists (current) pci_device_id field names
+ read ignored
+
+ while read module match_flags vendor_id model_id specifier_id version
+ do
+ : check match for $module
+
+ # convert from hex to dec
+ match_flags=$(($match_flags))
+ vendor_id=$(($vendor_id)); model_id=$(($model_id))
+ specifier_id=$(($specifier_id)); version=$(($version))
+
+ : vendor_id $vendor_id $device_vendor_id
+ if [ $(($match_flags & $MATCH_VENDOR_ID)) -ne 0 ] && [ $vendor_id -ne $device_vendor_id ]; then
+ continue
+ fi
+
+ : specifier_id $specifier_id $device_specifier_id
+ if [ $(($match_flags & $MATCH_SPECIFIER_ID)) -ne 0 ] && [ $specifier_id -ne $device_specifier_id ]; then
+ continue
+ fi
+
+ : version $version $device_version
+ if [ $(($match_flags & $MATCH_VERSION)) -ne 0 ] && [ $version != $device_version ]; then
+ continue
+ fi
+
+ DRIVERS="$module $DRIVERS"
+ done
+}
+
+#
+# What to do with this IEEE1394 hotplug event?
+#
+case "$ACTION" in
+
+add)
+ LABEL="IEEE1394 product 0x$VENDOR_ID/0x$SPECIFIER_ID/0x$VERSION"
+
+ # on 2.4 systems, modutils maintains MAP_CURRENT
+ if [ -r $MAP_CURRENT ]; then
+ load_drivers ieee1394 $MAP_CURRENT "$LABEL"
+ fi
+
+ if [ "$DRIVERS" = "" ]; then
+ mesg "... no drivers for $LABEL"
+ exit 2
+ fi
+ ;;
+
+remove)
+ ieee1394_map_modules < $MAP_CURRENT
+ for MODULE in $DRIVERS
+ do
+ if [ -x $HOTPLUG_DIR/ieee1394/$MODULE ]; then
+ $HOTPLUG_DIR/ieee1394/$MODULE
+ fi
+ done
+ ;;
+
+*)
+ debug_mesg "IEEE1394 '$ACTION' event not supported"
+ exit 1
+ ;;
+
+esac
--- /dev/null
+#!/bin/sh
+#
+# input-specific hotplug policy agent.
+#
+# This should handle 2.6.* input hotplugging,
+# with a consistent framework for adding device and driver
+# specific handling.
+#
+# Normally, adding a input device will modprobe handler(s) for
+# this device.
+#
+# Kernel input hotplug params include (not all of them may be available):
+#
+# ACTION=%s [add or remove]
+# PRODUCT=%x/%x/%x/%x
+# NAME=%s
+# PHYS=%s
+# EV=%lx
+# KEY=%lx %lx ...
+# REL=%lx
+# ABS=%lx %lx ...
+# MSC=%lx
+# LED=%lx
+# SND=%lx
+# FF=%lx %lx ...
+#
+# HISTORY:
+#
+# 30-Jul-2003 initial version
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+# DEBUG=yes export DEBUG
+
+# generated by module-init-tools
+MAP_CURRENT=$MODULE_DIR/modules.inputmap
+
+# accumulates list of modules we may care about
+DRIVERS=""
+
+if [ "$ACTION" = "" ]; then
+ mesg Bad INPUT agent invocation, no action
+ exit 1
+fi
+
+# we can't "unset IFS" on bash1, so save a copy
+DEFAULT_IFS="$IFS"
+
+#
+# Each modules.inputmap format line corresponds to one entry in a
+# MODULE_DEVICE_TABLE(input,...) declaration in a kernel file.
+#
+matchBits=0; i_bustype=0; i_vendor=0; i_product=0; i_version=0; i_evBits=0
+
+input_join_words ()
+{
+ name="$1"
+ array="$2"
+
+ if [ "$array" = '' ]; then
+ return
+ fi
+
+ set $array
+
+ tmp="$1"
+ shift
+ while [ "$#" -gt 0 ]; do
+ tmp="$tmp:$1"
+ shift
+ done
+
+ eval "$name=\"$tmp\""
+}
+
+input_convert_vars ()
+{
+ if [ "$PRODUCT" != "" ]; then
+ IFS=/
+ set $PRODUCT ''
+ IFS="$DEFAULT_IFS"
+ i_bustype=$((0x$1))
+ i_vendor=$((0x$2))
+ i_product=$((0x$3))
+ i_version=$((0x$4))
+ fi
+
+ if [ "$EV" != "" ]; then
+ i_evBits=$((0x$EV))
+ fi
+
+ input_join_words i_keyBits "$KEY"
+ input_join_words i_relBits "$REL"
+ input_join_words i_absBits "$ABS"
+ input_join_words i_mscBits "$MSC"
+ input_join_words i_ledBits "$LED"
+ input_join_words i_sndBits "$SND"
+ input_join_words i_ffBits "$FF"
+}
+
+INPUT_DEVICE_ID_MATCH_BUS=1
+INPUT_DEVICE_ID_MATCH_VENDOR=2
+INPUT_DEVICE_ID_MATCH_PRODUCT=4
+INPUT_DEVICE_ID_MATCH_VERSION=8
+INPUT_DEVICE_ID_MATCH_EVBIT=$((0x010))
+INPUT_DEVICE_ID_MATCH_KEYBIT=$((0x020))
+INPUT_DEVICE_ID_MATCH_RELBIT=$((0x040))
+INPUT_DEVICE_ID_MATCH_ABSBIT=$((0x080))
+INPUT_DEVICE_ID_MATCH_MSCBIT=$((0x100))
+INPUT_DEVICE_ID_MATCH_LEDBIT=$((0x200))
+INPUT_DEVICE_ID_MATCH_SNDBIT=$((0x400))
+INPUT_DEVICE_ID_MATCH_FFBIT=$((0x800))
+
+
+input_match_bits ()
+{
+ mod_bits=$1
+ dev_bits=$2
+
+ if [ "$dev_bits" = "" ]; then
+ return 0
+ fi
+ mword=$((0x${mod_bits##*:}))
+ dword=$((0x${dev_bits##*:}))
+
+ while true; do
+ if [ $(( $mword & $dword != $mword )) -eq 1 ]; then
+ return 1
+ fi
+
+ mod_bits=${mod_bits%:*}
+ dev_bits=${dev_bits%:*}
+
+ case "$mod_bits-$dev_bits" in
+ *:*-*:* )
+ : continue
+ ;;
+ *:*-*|*-*:* )
+ return 0
+ ;;
+ * )
+ return 1
+ ;;
+ esac
+ done
+}
+
+#
+# stdin is "modules.inputmap" syntax
+# on return, all matching modules were added to $DRIVERS
+#
+input_map_modules ()
+{
+ while read line
+ do
+ # comments are lines that start with "#" ...
+ # be careful, they still get parsed by bash!
+ case "$line" in
+ \#*) continue ;;
+ esac
+
+ set $line
+
+ module="$1"
+ matchBits=$(($2))
+
+ bustype=$(($3))
+ vendor=$(($4))
+ product=$(($5))
+ version=$(($6))
+
+ evBits="$7"
+ keyBits="$8"
+ relBits="$9"
+
+ shift 9
+ absBits="$1"
+ cbsBits="$2"
+ ledBits="$3"
+ sndBits="$4"
+ ffBits="$5"
+ driverInfo=$(($6))
+
+ : checkmatch $module
+
+ : bustype $bustype $i_bustype
+ if [ $INPUT_DEVICE_ID_MATCH_BUS -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_BUS )) ] &&
+ [ $bustype -ne $i_bustype ]; then
+ continue
+ fi
+
+ : vendor $vendor $i_vendor
+ if [ $INPUT_DEVICE_ID_MATCH_VENDOR -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_VENDOR )) ] &&
+ [ $vendor -ne $i_vendor ]; then
+ continue
+ fi
+
+ : product $product $i_product
+ if [ $INPUT_DEVICE_ID_MATCH_PRODUCT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_PRODUCT )) ] &&
+ [ $product -ne $i_product ]; then
+ continue
+ fi
+
+ # version i_version $i_version < version $version
+ if [ $INPUT_DEVICE_ID_MATCH_VERSION -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_VERSION )) ] &&
+ [ $version -ge $i_version ]; then
+ continue
+ fi
+
+ : evBits $evBits $i_evBits
+ if [ $INPUT_DEVICE_ID_MATCH_EVBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_EVBIT )) ] &&
+ input_match_bits "$evBits" "$i_evBits"; then
+ continue
+ fi
+ : keyBits $keyBits $i_keyBits
+ if [ $INPUT_DEVICE_ID_MATCH_KEYBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_KEYBIT )) ] &&
+ input_match_bits "$keyBits" "$i_keyBits"; then
+ continue
+ fi
+ : relBits $relBits $i_relBits
+ if [ $INPUT_DEVICE_ID_MATCH_RELBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_RELBIT )) ] &&
+ input_match_bits "$relBits" "$i_relBits"; then
+ continue
+ fi
+
+ : absBits $absBits $i_absBits
+ if [ $INPUT_DEVICE_ID_MATCH_ABSBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_ABSBIT )) ] &&
+ input_match_bits "$absBits" "$i_absBits"; then
+ continue
+ fi
+
+ : mscBits $mscBits $i_mscBits
+ if [ $INPUT_DEVICE_ID_MATCH_MSCBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_MSCBIT )) ] &&
+ input_match_bits "$mscBits" "$i_mscBits"; then
+ continue
+ fi
+
+ : ledBits $ledBits $_ledBits
+ if [ $INPUT_DEVICE_ID_MATCH_LEDBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_LEDBIT )) ] &&
+ input_match_bits "$ledBits" "$i_ledBits"; then
+ continue
+ fi
+
+ : sndBits $sndBits $i_sndBits
+ if [ $INPUT_DEVICE_ID_MATCH_SNDBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_SNDBIT )) ] &&
+ input_match_bits "$sndBits" "$i_sndBits"; then
+ continue
+ fi
+
+ : ffBits $ffBits $i_ffBits
+ if [ $INPUT_DEVICE_ID_MATCH_FFBIT -eq $(( $matchBits & $INPUT_DEVICE_ID_MATCH_FFBIT )) ] &&
+ input_match_bits "$ffBits" "$i_ffBits"; then
+ continue
+ fi
+
+ : driverInfo $driverInfo
+ if [ $matchBits -eq 0 ] && [ $driverInfo -eq 0 ]; then
+ continue
+ fi
+
+ # It was a match!
+ case " $DRIVERS " in
+ *" $module "* )
+ : already found
+ ;;
+ * )
+ DRIVERS="$module $DRIVERS"
+ ;;
+ esac
+ : drivers $DRIVERS
+ done
+}
+
+#
+# What to do with this INPUT hotplug event?
+#
+case $ACTION in
+
+add)
+
+ input_convert_vars
+
+ FOUND=false
+ LABEL="INPUT product $PRODUCT"
+
+ if [ -r $MAP_CURRENT ]; then
+ load_drivers input $MAP_CURRENT "$LABEL"
+ fi
+
+ if [ "$DRIVERS" != "" ]; then
+ FOUND=true
+ fi
+
+ if [ "$FOUND" = "false" ]; then
+ debug_mesg "... no modules for $LABEL"
+ exit 2
+ fi
+
+ ;;
+
+remove)
+ : nothing so far
+
+ ;;
+
+*)
+ debug_mesg INPUT $ACTION event not supported
+ exit 1
+ ;;
+
+esac
--- /dev/null
+#!/bin/sh
+#
+# input.rc This loads handlers for those input devices
+# that have drivers compiled in kernel
+# Currently stopping is not supported
+#
+# Best invoked via /etc/init.d/hotplug or equivalent, with
+# writable /tmp, /usr mounted, and syslogging active.
+#
+
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+PROCDIR=/proc/bus/input
+
+# source function library
+if [ -f /etc/init.d/functions ]; then
+ . /etc/init.d/functions
+elif [ -f /etc/rc.d/init.d/functions ]; then
+ . /etc/rc.d/init.d/functions
+fi
+
+if [ -f /etc/hotplug/hotplug.functions ]; then
+ . /etc/hotplug/hotplug.functions
+fi
+
+input_reset_state () {
+
+ PRODUCT=
+ NAME=
+ PHYS=
+ EV=
+ KEY=
+ REL=
+ ABS=
+ MSC=
+ LED=
+ SND=
+ FF=
+
+}
+
+#
+# "COLD PLUG" ... load input handlers for compile-in input drivers loaded
+# before the OS could really handle hotplug, perhaps because /sbin or
+# $HOTPLUG_DIR wasn't available or /tmp wasn't writable. When/if the
+# /sbin/hotplug program is invoked then, hotplug event notifications
+# get dropped. To make up for such "cold boot" errors, we synthesize
+# all the hotplug events we expect to have seen already. They can be
+# out of order, and some might be duplicates.
+#
+input_boot_events ()
+{
+ # do not even try if /proc/bus/input is missing
+ [ -d $PROCDIR ] || return
+
+ if [ ! -r $PROCDIR/devices ]; then
+ echo $"** can't synthesize input events - $PROCDIR/devices missing"
+ return
+ fi
+
+ ACTION=add
+ export ACTION
+
+ export PRODUCT NAME PHYS EV KEY REL ABS MSC LED SND FF
+ input_reset_state
+
+ #
+ # the following reads from /proc/bus/input/devices. It is inherently
+ # racy (esp. as this file may be changed by input.agent invocation)
+ # but so far input devices do not appear in sysfs
+ #
+ while read line; do
+ case "$line" in
+ I:* ) # product ID
+ eval "${line#I: }"
+ PRODUCT="$Bus/$Vendor/$Product/$Version"
+ ;;
+ N:* ) # name
+ eval "${line#N: }"
+ NAME="$Name"
+ ;;
+ P:* ) # Physical
+ eval "${line#P: }"
+ PHYS="$Phys"
+ ;;
+ B:* ) # Controls supported
+ line="${line#B: }"
+ eval "${line%%=*}=\"${line#*=}\""
+ ;;
+ "" ) # End of block
+ debug_mesg "Invoking input.agent"
+ debug_mesg "PRODUCT=$PRODUCT"
+ debug_mesg "NAME=$NAME"
+ debug_mesg "PHYS=$PHYS"
+ debug_mesg "EV=$EV"
+ debug_mesg "KEY=$KEY"
+ debug_mesg "REL=$REL"
+ debug_mesg "ABS=$ABS"
+ debug_mesg "MSC=$MSC"
+ debug_mesg "LED=$LED"
+ debug_mesg "SND=$SND"
+ debug_mesg "FF=$FF"
+ /etc/hotplug/input.agent < /dev/null
+ input_reset_state
+ ;;
+ esac
+ done < $PROCDIR/devices
+}
+
+
+# See how we were called.
+case "$1" in
+ start)
+ input_boot_events
+ ;;
+ stop)
+ : not supported currently
+ ;;
+ status)
+ echo $"INPUT status for kernel: " `uname -srm`
+ echo ''
+
+ echo "INPUT devices:"
+ if [ -r $PROCDIR/devices ]; then
+ grep "^[INHP]:" $PROCDIR/devices
+ else
+ echo "$PROCDIR/devices not available"
+ fi
+ echo ''
+
+ echo "INPUT handlers:"
+ if [ -r $PROCDIR/handlers ]; then
+ cat $PROCDIR/handlers
+ else
+ echo "$PROCDIR/handlers not available"
+ fi
+
+ echo ''
+
+ ;;
+ restart)
+ # always invoke by absolute path, else PATH=$PATH:
+ $0 stop && $0 start
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|status|restart}"
+ exit 1
+esac
--- /dev/null
+#!/bin/sh
+#
+# Network hotplug policy agent for Linux 2.4 kernels
+#
+# Kernel NET hotplug params include:
+#
+# ACTION=%s [register or unregister]
+# INTERFACE=%s
+#
+# HISTORY:
+#
+# 25-Feb-2001 Special case ppp and similar (redhat)
+# 23-Jan-2001 Log invocation of "ifup" if debugging
+# 04-Jan-2001 Initial version of "new" hotplug agent.
+#
+# $Id: net.agent,v 1.22 2004/09/20 23:02:34 kroah Exp $
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+# DEBUG=yes export DEBUG
+
+if [ "$INTERFACE" = "" ]; then
+ mesg Bad NET invocation: \$INTERFACE is not set
+ exit 1
+fi
+
+case $ACTION in
+add|register)
+ # Red Hat specific hack...
+ if [ -f /etc/redhat-release ]; then
+ # Don't do anything if the network is stopped
+ if [ ! -f /var/lock/subsys/network ]; then
+ exit 0
+ fi
+ fi
+
+ case $INTERFACE in
+ # interfaces that are registered after being "up" (?)
+ ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*)
+ debug_mesg assuming $INTERFACE is already up
+ exit 0
+ ;;
+ # interfaces that are registered then brought up
+ *)
+ # NOTE: network configuration relies on administered state,
+ # we can't do much here without distro-specific knowledge
+ # such as whether/how to invoke DHCP, set up bridging, etc.
+
+ # Run ifrename as needed - Jean II
+ # Remap interface names based on MAC address. This workaround
+ # the dreaded configuration problem "all my cards are 'eth0'"...
+ # This needs to be done before ifup otherwise ifup will get
+ # confused by the name changed and because iface need to be
+ # down to change its name.
+ if [ -x /sbin/ifrename ] && [ -r /etc/iftab ]; then
+ debug_mesg invoke ifrename for $INTERFACE
+ NEWNAME=`/sbin/ifrename -i $INTERFACE`
+ if [ -n "$NEWNAME" ]; then
+ debug_mesg iface $INTERFACE is remapped to $NEWNAME
+ INTERFACE=$NEWNAME
+ fi;
+ fi
+
+ # RedHat and similar
+ export IN_HOTPLUG=1
+ if [ -x /sbin/ifup ]; then
+ debug_mesg invoke ifup $INTERFACE
+ exec /sbin/ifup $INTERFACE
+
+ # Gentoo
+ elif [ -f /etc/gentoo-release ]; then
+ script=/etc/init.d/net.$INTERFACE
+ if [ -x "$script" ]; then
+ debug_mesg invoke \"$script\" --quiet start
+ exec "$script" --quiet start
+ fi
+ else
+ mesg "how do I bring interfaces up on this distro?"
+ fi
+ ;;
+ esac
+ mesg $1 $ACTION event not handled
+ ;;
+
+remove|unregister)
+ case $INTERFACE in
+ # interfaces that are unregistered after being "down" (?)
+ ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*)
+ debug_mesg assuming $INTERFACE is already down
+ exit 0
+ ;;
+ *)
+ # right now it looks like only Gentoo wants to care about
+ # unregistering network devices...
+ if [ -f /etc/gentoo-release ]; then
+ script=/etc/init.d/net.$INTERFACE
+ if [ -x "$script" ]; then
+ debug_mesg invoke "$script" --quiet stop
+ exec "$script" --quiet stop
+ fi
+ fi
+ ;;
+ esac
+ mesg $1 $ACTION event not handled
+ ;;
+
+*)
+ debug_mesg NET $ACTION event for $INTERFACE not supported
+ exit 1 ;;
+
+esac
--- /dev/null
+#!/bin/sh
+#
+# PCI-specific hotplug policy agent.
+#
+# This should handle 2.4.* PCI (including Cardbus) hotplugging,
+# with a consistent framework for adding device and driver specific
+# treatments.
+#
+# Kernel Cardbus/PCI params are:
+#
+# ACTION=%s [add or remove]
+# PCI_CLASS=%06X
+# PCI_ID=%04X:%04X
+# PCI_SLOT_NAME=%s
+# PCI_SUBSYS_ID=%04X:%04X
+#
+# If /proc is mounted, /proc/bus/pci/$PCI_SLOT_NAME is almost the name
+# of the binary device descriptor file ... just change ':' to '/'.
+#
+# On systems using Linux 2.4.* kernels, be sure to use the right
+# modutils (2.4.1+).
+#
+#
+# HISTORY:
+#
+# 26-Feb-2001 Cleanup, support comments (Gioele Barabucci)
+# 13-Jan-2001 Initial version of "new" hotplug agent; needs
+# retesting.
+# 17-Jan-2001 Update to latest kernel syntax (Dan Zink)
+# 15-Feb-2001 Remove use of "<<" (Adam Richter)
+#
+# $Id: pci.agent,v 1.16 2004/09/20 21:43:37 kroah Exp $
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+# generated by modutils, for current 2.4.x kernels
+MAP_CURRENT=$MODULE_DIR/modules.pcimap
+
+# accumulates list of modules we may care about
+DRIVERS=
+
+if [ "$PCI_CLASS" = "" ] || [ "$PCI_CLASS" = "" ]; then
+ mesg Bad PCI agent invocation
+ exit 1
+fi
+
+#
+# Each modules.usbmap format line corresponds to one entry in a
+# MODULE_DEVICE_TABLE(pci,...) declaration in a kernel file.
+#
+# Think of it as a database column with up to three "match specs"
+# to associate kernel modules with particular devices or classes
+# of device. The match specs provide a reasonably good filtering
+# mechanism, but some driver probe() routines need to provide
+# extra filtering.
+#
+
+pci_convert_vars ()
+{
+ pci_class=$((0x$PCI_CLASS))
+
+ set $(echo $PCI_ID | sed -e 's/\([^:]*\):\(.*\)/\1 \2/')
+ pci_id_vendor=$((0x$1))
+ pci_id_device=$((0x$2))
+
+ set $(echo $PCI_SUBSYS_ID | sed -e 's/\([^:]*\):\(.*\)/\1 \2/')
+ pci_subid_vendor=$((0x$1))
+ pci_subid_device=$((0x$2))
+}
+
+PCI_ANY=$((0xffffffff))
+
+
+#
+# stdin is "modules.pcimap" syntax
+# on return, ONE matching module was added to $DRIVERS
+#
+pci_map_modules ()
+{
+ # comment line lists (current) pci_device_id field names
+ read ignored
+
+ # look at each pci_device_id entry
+ # collect one match in $DRIVERS
+ while read module vendor device subvendor subdevice class class_mask ignored
+ do
+ # comments are lines that start with "#" ...
+ # be careful, they still get parsed by bash!
+ case "$module" in
+ \#*) continue ;;
+ esac
+
+ # convert the fields from hex to dec
+ vendor=$(($vendor)); device=$(($device))
+ subvendor=$(($subvendor)); subdevice=$(($subdevice))
+ class=$(($class)); class_mask=$(($class_mask))
+
+ : checkmatch $module
+
+ : vendor $vendor $pci_id_vendor
+ if [ $vendor -ne $PCI_ANY ] && [ $vendor -ne $pci_id_vendor ]; then
+ continue
+ fi
+ : device $device $pci_id_device
+ if [ $device -ne $PCI_ANY ] && [ $device -ne $pci_id_device ]; then
+ continue
+ fi
+ : sub-vendor $subvendor $pci_subid_vendor
+ if [ $subvendor -ne $PCI_ANY ] && [ $subvendor -ne $pci_subid_vendor ]; then
+ continue
+ fi
+ : sub-device $subdevice $pci_subid_device
+ if [ $subdevice -ne $PCI_ANY ] && [ $subdevice -ne $pci_subid_device ]; then
+ continue
+ fi
+
+ class_temp=$(($pci_class & $class_mask))
+ if [ $class_temp -eq $class ]; then
+ DRIVERS="$module $DRIVERS"
+ : drivers $DRIVERS
+ break
+ fi
+ done
+}
+
+
+#
+# What to do with this PCI hotplug event?
+#
+case $ACTION in
+
+add)
+ pci_convert_vars
+
+ LABEL="PCI slot $PCI_SLOT_NAME"
+
+ # on 2.4 systems, modutils maintains MAP_CURRENT
+ if [ -r $MAP_CURRENT ]; then
+ load_drivers pci $MAP_CURRENT "$LABEL"
+ fi
+
+ if [ "$DRIVERS" = "" ]; then
+ debug_mesg "... no modules for $LABEL"
+ exit 2
+ fi
+ ;;
+
+*)
+ debug_mesg PCI $ACTION event not supported
+ exit 1
+ ;;
+
+esac
--- /dev/null
+#!/bin/sh
+# vim: syntax=sh
+#
+# pci.rc mostly to recover lost boot-time pci hotplug events
+#
+# $Id: pci.rc,v 1.12 2004/09/20 21:36:47 kroah Exp $
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+pci_boot_events ()
+{
+ # make sure the pci agent will run
+ ACTION=add
+ PCI_CLASS=0
+ PCI_ID=0:0
+ PCI_SLOT=0:0.0
+ PCI_SLOT_NAME=0:0.0
+ PCI_SUBSYS_ID=0:0
+ export ACTION PCI_CLASS PCI_ID PCI_SLOT PCI_SLOT_NAME PCI_SUBSYS_ID
+
+ if [ -d /sys/bus ]; then
+ # 2.6 kernels
+ if [ -d /sys/bus/pci/devices/ ]; then
+ cd /sys/bus/pci/devices/
+ for PCI_DEVICE in *; do
+ set `echo $PCI_DEVICE \
+ | sed -e 's/\([^:]*\):\(.*\):\(.*\)\.\(.*\)/\1 \2 \3 \4/'`
+ PCI_SLOT_NAME=$2:$3.$4
+ PCI_CLASS="`cat $PCI_DEVICE/class`"
+ PCI_CLASS=${PCI_CLASS#0x}
+ vendor_id=`cat $PCI_DEVICE/vendor`
+ device_id=`cat $PCI_DEVICE/device`
+ PCI_ID="${vendor_id#0x}:${device_id#0x}"
+ sub_vendor_id=`cat $PCI_DEVICE/subsystem_vendor`
+ sub_device_id=`cat $PCI_DEVICE/subsystem_device`
+ PCI_SUBSYS_ID="${sub_vendor_id#0x}:${sub_device_id#0x}"
+ /sbin/hotplug pci
+ done
+ fi
+ else
+ # 2.4 kernels
+ LISTER=`which pcimodules`
+ if [ "$LISTER" = "" ] || [ ! -f /proc/bus/pci/devices ] || [ ! -x pci.agent ]; then
+ echo $"** can't synthesize pci hotplug events"
+ return 1
+ fi
+
+ # these notifications will be handled by pcimodules
+ for BUS in `cd /proc/bus/pci;find * -type d -print`; do
+ for SLOT_FUNC in `cd /proc/bus/pci/$BUS; echo *`; do
+ PCI_SLOT=$BUS:$SLOT_FUNC
+ /sbin/hotplug pci
+ done
+ done
+ fi
+
+ return 0
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ pci_boot_events
+ ;;
+ stop)
+ # echo $"pci stop -- ignored"
+ ;;
+ status)
+ echo $"PCI Status for kernel: " `uname -srm`
+ echo ''
+
+ if [ -f /proc/bus/pci/devices ]; then
+ COUNT=`ls /proc/bus/pci | wc -l`
+ if [ $COUNT -gt 1 ]; then
+ COUNT=`expr $COUNT - 1`
+ echo $"PCI up; bus count is $COUNT"
+ if [ -x /sbin/lspci ]; then
+ /sbin/lspci
+ fi
+ else
+ echo $"no PCI busses?"
+ fi
+ echo ''
+ else
+ echo $"no PCI /proc support?"
+ fi
+ echo ''
+
+ ;;
+ restart)
+ # always invoke by absolute path, else PATH=$PATH:
+ $0 stop && $0 start
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|status|restart}"
+ exit 1
+esac
--- /dev/null
+# isapnp module cardvendor carddevice driver_data vendor function ...
+irtty-sir 0xffff 0xffff 0x00000000 0xd041 0x1005
+irtty-sir 0xffff 0xffff 0x00000000 0xd041 0x1105
+floppy 0xffff 0xffff 0x00000000 0xd041 0x0007
+pcspkr 0xffff 0xffff 0x00000000 0xd041 0x0008
+rtc 0xffff 0xffff 0x00000000 0xd041 0x000b
+atkbd 0xffff 0xffff 0x00000000 0xd041 0x0303
+psmouse 0xffff 0xffff 0x00000000 0xd041 0x130f
+analog 0xffff 0xffff 0x00000000 0xd041 0x2fb0
--- /dev/null
+#!/bin/sh
+# vim: syntax=sh
+#
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Copyright (C) 2004 Alexander E. Patrakov (patrakov@ums.usu.ru)
+# Copyright (C) 2004 Simone Gotti (simone.gotti@email.it)
+# All Rights Reserved.
+#
+# Based on scripts by Simone Gotti, from:
+# http://members.xoom.virgilio.it/motaboy/hotplug-isapnp-0.2.1.tar.bz2
+#
+
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+if [ "$(echo /sys/bus/pnp/devices/*)" = "/sys/bus/pnp/devices/*" ]
+then
+ exit 0
+fi
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+MAP_CURRENT=$MODULE_DIR/modules.isapnpmap
+DRIVERS=
+
+# WARNING: od and printf are in /usr/bin
+decode_isapnp_vendor() {
+ echo -n $1 | od -A n -t d1 | ( read A B C
+ printf '%x\n' $(( ( ( $A & 0x3f ) << 2) | \
+ ( ( $B & 0x18 ) >> 3) | \
+ ( ( $B & 0x07 ) <<13) | \
+ ( ( $C & 0x1f ) << 8) )) )
+}
+
+hex_swab() {
+ echo `echo $1 | cut -b3-4``echo $1 | cut -b1-2`
+}
+
+#
+# stdin is "modules.isapnpmap" syntax
+# on return, ONE matching module was added to $DRIVERS
+#
+isapnp_map_modules ()
+{
+ local module ignored
+
+ CHECKED_ID="0x`echo $ISAPNP_ID | cut -b1-4`0x`echo $ISAPNP_ID | cut -b5-8`"
+ # comment line lists (current) isapnp_device_id field names
+ read ignored
+
+ while read module cardvendor carddevice driver_data therest
+ do
+ # comments are lines that start with "#" ...
+ # be careful, they still get parsed by bash!
+ case "$module" in
+ \#*) continue ;;
+ esac
+ : checkmatch $module
+ set $therest
+ while [ $# -gt 0 ]
+ do
+ id_temp=$2$1
+ if [ "$id_temp" = "$CHECKED_ID" ] ; then
+ DRIVERS="$module $DRIVERS"
+ : drivers $DRIVERS
+ break
+ fi
+ shift
+ shift
+ done
+ done
+}
+
+
+isapnp_boot_events ()
+{
+ cd /sys/bus/pnp/devices/
+ for ISAPNP_DEVICE in * ; do
+ ISAPNP_STRINGS=`cat $ISAPNP_DEVICE/id`
+ for ISAPNP_STRING in $ISAPNP_STRINGS ; do
+ rawcardvendor=`echo $ISAPNP_STRING | cut -b1-3`
+ rawcarddevice=`echo $ISAPNP_STRING | cut -b4-7`
+ cardvendor=`decode_isapnp_vendor $rawcardvendor`
+ carddevice=`hex_swab $rawcarddevice`
+ ISAPNP_ID=$carddevice$cardvendor
+ LABEL="ISAPNP id $ISAPNP_ID"
+ load_drivers isapnp $MAP_CURRENT "$LABEL"
+ load_drivers isapnp /etc/hotplug/pnp.distmap "$LABEL"
+ done
+ done
+ return 0
+}
+
+
+# See how we were called.
+case "$1" in
+ start)
+ isapnp_boot_events
+ ;;
+ stop)
+ # echo $"isapnp stop -- ignored"
+ ;;
+ status)
+ # echo $"isapnp status -- ignored"
+ ;;
+ restart)
+ # always invoke by absolute path, else PATH=$PATH:
+ $0 stop && $0 start
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|status|restart}"
+ exit 1
+esac
--- /dev/null
+#!/bin/sh
+#
+# SCSI hotplug agent for 2.5 kernels
+#
+# ACTION=add
+# DEVPATH=devices/scsi0/0:0:0:0
+#
+
+cd /etc/hotplug
+. ./hotplug.functions
+
+case $ACTION in
+
+add)
+ # 2.5.50 kernel bug: this happens sometimes
+ if [ ! -d /sys/$DEVPATH ]; then
+ mesg "bogus sysfs DEVPATH=$DEVPATH"
+ exit 1
+ fi
+
+ TYPE_ATTR=/sys$DEVPATH/type
+
+ # Possibly sleep here to try and avoid races with scsi attributes and block
+ # devices
+ count=120
+ while [ ! -f $TYPE_ATTR ] && [ $count -gt 0 ]
+ do
+ # We seem to always hit this now, so don't output any message.
+ debug_mesg "waiting for $TYPE_ATTR"
+ sleep 1
+ count=$(($count-1))
+ done
+
+ if [ ! -f $TYPE_ATTR ]
+ then
+ mesg "Attribute $TYPE_ATTR does not exist"
+ exit 1
+ fi
+
+ TYPE=$(cat $TYPE_ATTR)
+ case "$TYPE" in
+ # 2.5.51 style attributes; <scsi/scsi.h> TYPE_* constants
+ 0) TYPE=disk ; MODULE=sd_mod ;;
+ # FIXME some tapes use 'osst' not 'st'
+ 1) TYPE=tape ; MODULE=st ;;
+ 2) TYPE=printer ;;
+ 3) TYPE=processor ;;
+ 4) TYPE=worm ; MODULE=sr_mod ;;
+ 5) TYPE=cdrom ; MODULE=sr_mod ;;
+ 6) TYPE=scanner ;;
+ 7) TYPE=mod ; MODULE=sd_mod ;;
+ 8) TYPE=changer ;;
+ 9) TYPE=comm ;;
+ 14) TYPE=enclosure ;;
+ esac
+ if [ "$MODULE" != "" ]; then
+ mesg "$TYPE at $DEVPATH"
+ modprobe $MODULE
+ else
+ debug_mesg "how to add device type=$TYPE at $DEVPATH ??"
+ fi
+ ;;
+
+*)
+ debug_mesg SCSI $ACTION event not supported
+ exit 1
+ ;;
+
+esac
--- /dev/null
+#!/bin/sh
+###############################################################################
+# Tape hotplug agent for Linux 2.4 kernels
+#
+# Copyright (c) 2002 IBM Development Germany, Boeblingen
+#
+# the GNU Public License applies
+#
+# Author: Stefan Bader <Stefan.Bader@de.ibm.com>, 2002
+#
+# History:
+# 2002-10-14 Stefan Bader <Stefan.Bader@de.ibm.com>
+# Fixed remove char case (missing statement)
+# 2002-10-01 Stefan Bader <Stefan.Bader@de.ibm.com>
+# Created inital version
+#
+# Generated by:
+# /usr/src/linux/drivers/s390/char/tape.c
+#
+# Evionment:
+# ACTION ::= add | remove
+# DEVNO ::= <4 digit hex number>
+# MAJOR ::= <dec major number>
+# MINOR ::= <dec minor number>
+# INTERFACE ::= char | block
+###############################################################################
+: ${ACTION?Bad invocation: \$ACTION is not set}
+: ${DEVNO?Bad invocation: \$DEVNO is not set}
+: ${MAJOR?Bad invocation: \$MAJOR is not set}
+: ${MINOR?Bad invocation: \$MINOR is not set}
+: ${INTERFACE?Bad invocation: \$INTERFACE is not set}
+
+# Convert to lowercase (just in case)
+DEVNO=$(echo $DEVNO | tr A-F a-f)
+
+cd /etc/hotplug
+. hotplug.functions
+
+mesg "$ACTION $DEVNO $MAJOR $MINOR $INTERFACE"
+
+if test -r tape.permissions; then
+ . tape.permissions
+else
+ mesg "Tape permission handling not found"
+ exit 1
+fi
+
+#==============================================================================
+# To preserve the script from doing anything real, call it with
+# CONDOM=echo
+: ${CONDOM=}
+# To try things on an alternate location set ROOTDIR to a different base
+#: ${ROOTDIR=}
+: ${ROOTDIR=}
+# Abort on error or unset variables:
+set -o errexit
+set -o nounset
+#==============================================================================
+
+#------------------------------------------------------------------------------
+# Environment: none
+# Parameters : $1 : abort message
+# $2 : optional return code
+#------------------------------------------------------------------------------
+# Abort handling
+abort() {
+ if test "$#" -lt 2; then
+ RC=1
+ else
+ RC=$2
+ fi
+
+ mesg "$1 RC($RC)"
+ exit $RC
+}
+
+#------------------------------------------------------------------------------
+# Environment: INTERFACE
+# MINOR
+# Parameters: none
+#
+# Prints: Tape number [0..127]
+# Returns: 0
+#------------------------------------------------------------------------------
+tape_number() {
+ if test "$INTERFACE" = "block"; then
+ echo $MINOR
+ else
+ echo "$(($MINOR / 2))"
+ fi
+ return 0
+}
+
+#------------------------------------------------------------------------------
+# Environment: ROOTDIR
+# DEVNO
+# CONDOM
+# Parameters: $1 : variable part of the link name
+# $2 : variable part of the target node name
+#
+# Creates a symbolic link to access the tape device by devno
+#
+# Prints: nothing
+# Returns: 0 on success, otherwise 1
+#------------------------------------------------------------------------------
+create_symlink() {
+ LINK=$ROOTDIR/dev/tape/$DEVNO/$1
+ TARGET=../../../$2$(tape_number)
+
+ # Do not create link if devfs compatibility mode is not started
+ if test ! -d $ROOTDIR/dev/tape; then
+ return 0
+ fi
+
+ if test ! -d $(dirname $LINK); then
+ $CONDOM mkdir -p $(dirname $LINK) || return 1
+ fi
+ mesg "Creating symlink $LINK -> $TARGET"
+ $CONDOM rm -f $LINK || return 1
+ $CONDOM ln -s $TARGET $LINK || return 1
+
+ return 0
+}
+
+#------------------------------------------------------------------------------
+# Environment: MAJOR
+# MINOR
+# Parameters: $1 : node name
+# $2 : device type (b|c)
+#
+# Tests whether the node already exists with the correct type, major and minor
+#
+# Prints: nothing
+# Returns: 0 if the node is ok, otherwise 1
+#------------------------------------------------------------------------------
+verify_node() {
+ NAME="$1"
+ TYPE="$2"
+ RC=1
+
+ if test -$TYPE "$NAME"; then
+ MAJMIN=$(ls -l "$NAME"|awk '{print $5 $6}')
+
+ if test "$(echo $MAJMIN|cut -d, -f1)" = "$MAJOR"; then
+ if test "$(echo $MAJMIN|cut -d, -f2)" = "$MINOR"; then
+ RC=0
+ fi
+ fi
+ fi
+
+ return $RC
+}
+
+#------------------------------------------------------------------------------
+# Environment: ROOTDIR
+# INTERFACE
+# CONDOM
+# MAJOR
+# MINOR
+# OWNER
+# PERMISSIONS
+# Parameters: $1 : device type (b|c)
+# $2 : variable part of the device node name ([brn]tibm)
+#
+# Creates a device node for the tpae device (if it doesn't exist) and sets
+# the permissions.
+#
+# Prints: nothing
+# Returns: 0 on success, otherwise 1
+#------------------------------------------------------------------------------
+create_node() {
+ TYPE="$1"
+ NAME="$ROOTDIR/dev/$2$(tape_number)"
+
+ # FIXME: This would currently recreate the device node if it isn't
+ # right even if devfs compatibility isn't enabled. Should
+ # ownership and permissions be preserved in that case???
+ if ! verify_node $NAME $TYPE; then
+ mesg "Creating devicenode $NAME"
+ $CONDOM rm -f "$NAME" || return 1
+ $CONDOM mknod "$NAME" $TYPE $MAJOR $MINOR || return 1
+ fi
+
+ # We only want to change ownership and permissions if devfs compa-
+ # tibility is enabled.
+ tape_permissions $DEVNO
+ if test "$OWNER" != "" && test -d $ROOTDIR/dev/tape; then
+ $CONDOM chown $OWNER "$NAME" || return 1
+
+ if test "$PERMISSIONS" != ""; then
+ $CONDOM chmod "$PERMISSIONS" "$NAME" || return 1
+ fi
+ fi
+
+ return 0
+}
+
+#------------------------------------------------------------------------------
+# Main
+#------------------------------------------------------------------------------
+case "$ACTION" in
+ add)
+ case "$INTERFACE" in
+ block)
+ create_node b btibm || return 1
+ create_symlink block/disc btibm || return 1
+ ;;
+ char)
+ create_node c ntibm || return 1
+ create_symlink char/norewind ntibm || return 1
+ MINOR=$(($MINOR + 1))
+ create_node c rtibm || return 1
+ create_symlink char/rewind rtibm || return 1
+ ;;
+ *)
+ abort "Unknown interface type <$INTERFACE>"
+ ;;
+ esac
+ ;;
+ remove)
+ case "$INTERFACE" in
+ char)
+ $CONDOM rm -rf $ROOTDIR/dev/tape/$DEVNO/char
+ if test -d $ROOTDIR/dev/tape; then
+ $CONDOM rm -f \
+ $ROOTDIR/dev/[nr]tibm$(tape_number)
+ fi
+ ;;
+ block)
+ $CONDOM rm -rf $ROOTDIR/dev/tape/$DEVNO/block
+ if test -d $ROOTDIR/dev/tape; then
+ $CONDOM \
+ rm -f $ROOTDIR/dev/btibm$(tape_number)
+ fi
+ ;;
+ *)
+ abort "Unknown interface type <$INTERFACE>"
+ ;;
+ esac
+
+ if test "$(ls $ROOTDIR/dev/tape/$DEVNO)" = ""; then
+ $CONDOM rmdir $ROOTDIR/dev/tape/$DEVNO
+ fi
+ ;;
+ *)
+ abort "$(basename $0): $ACTION event not supported"
+ ;;
+esac
+
+exit 0
+
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2002 IBM Development Germany, Boeblingen
+#
+# Author: Stefan Bader <Stefan.Bader@de.ibm.com>
+#
+# the GNU Public License applies
+#
+tape_permissions() {
+ DEVNO="$1"
+
+ case "$DEVNO" in
+ #
+ # You could set other permissions to specific tape device
+ # numbers here. E.g. the following would override the default
+ # for tape 1a32
+ #
+ # 1a32) OWNER=nobody.users PERMISSIONS="u=rw,go=";;
+
+ *) OWNER=root.root PERMISSIONS="ug=rw,o=";;
+ esac
+
+ return 0
+}
--- /dev/null
+#!/bin/sh
+#
+# USB-specific hotplug policy agent.
+#
+# This should handle 2.2.18+, 2.4.*, and 2.5.* USB hotplugging,
+# with a consistent framework for adding device and driver
+# specific handling.
+#
+# Normally, adding a usb device will modprobe a driver. If there
+# is a /etc/hotplug/usb/$DRIVER script set up, it will also run,
+# handling tasks like loading firmware or starting daemons.
+#
+# Kernel USB hotplug params include:
+#
+# ACTION=%s [add or remove]
+# DEVPATH=%s [in 2.5 kernels, /sys/$DEVPATH]
+# PRODUCT=%x/%x/%x
+# INTERFACE=%d/%d/%d [ for interface 0, if TYPE=0/*/* ]
+# TYPE=%d/%d/%d
+#
+# And if usbfs (originally called usbdevfs) is configured, also:
+#
+# DEVFS=/proc/bus/usb [gone in 2.5]
+# DEVICE=/proc/bus/usb/%03d/%03d
+#
+# This script then adds the variable:
+#
+# REMOVER=/var/run/usb/<some string unique to $DEVICE>
+#
+# This is the path where the script would like to find a remover, if
+# the target device needs one. This script is executed on remove if
+# it is executable when the remove happens.
+#
+# If usbfs is mounted on /proc/bus/usb, $DEVICE is a file which
+# can be read to get the device's current configuration descriptor.
+# (The "usbmodules" utility does that.) Or it can be used by a
+# user mode driver to interact with the usb device. USB hotplug
+# does *not* require usbfs (or sysfs) to work, although on 2.4
+# some devices work better if "usbmodules" can help.
+#
+# For Linux 2.5+ kernels, there's no need for "usbmodules". For
+# two reasons: first, hotplug is invoked for each interface, not
+# just the first one. Second, sysfs exposes descriptors so they
+# are easy to use for "coldplug" event simulation. (But sysfs is
+# not a replacement for the driver I/O capabilities in usbfs.)
+#
+# On systems using Linux 2.4.* kernels, be sure to use the right
+# modutils (2.4.2+). That ensures that hotplugging uses the list
+# of modules installed for your kernel, rather than the one that's
+# included here for use on systems without MODULE_DEVICE_TABLE
+# support.
+#
+#
+# HISTORY:
+#
+# 20-Nov-2002 some 2.5 updates; handle new 'device' hotplug; turn off
+# 'sleep' hack since hcds must all queue control traffic
+# 08-Aug-2002 support for multiple usermaps (maxk), minor cleanup
+# 18-Jan-2002 fix match algorithm in usb_map_modules()
+# 14-Jan-2002 fix work around 2.2 brokeness of $PRODUCT
+# 09-Jan-2002 REMOVER for system without usbdevfs
+#
+# 14-Mar-2001 Cleanup, bitmask the match_flags
+# 26-Feb-2001 Cleanup, support comments (Gioele Barabucci)
+# 15-Feb-2001 Remove use of "<<" (Adam Richter)
+# 23-Jan-2001 Update 2.2 handling; unfortunately there's no "feature
+# test" that can work robustly
+# 05-Jan-2001 Quick hack for kernel 2.4.0 and modutils 2.4.1
+# 03-Jan-2001 Initial version of "new" hotplug agent, using feedback
+# and contributions from Adam Richter, Ryan VanderBijl,
+# Norbert Preining, Florian Lohoff, David Brownell and
+# others. To replace the original /etc/usb/policy. (db)
+#
+# $Id: usb.agent,v 1.43 2004/09/20 22:50:11 kroah Exp $
+#
+
+if [ -f /etc/sysconfig/usb ]; then
+ . /etc/sysconfig/usb
+fi
+if [ -f /etc/conf.d/usb ]; then
+ . /etc/conf.d/usb
+fi
+
+cd /etc/hotplug
+. ./hotplug.functions
+# DEBUG=yes export DEBUG
+
+# generated by modutils, for current 2.4.x (and later) kernels
+MAP_CURRENT=$MODULE_DIR/modules.usbmap
+
+# used if MAP_CURRENT is missing; for 2.2.x kernels
+MAP_DISTMAP=$HOTPLUG_DIR/usb.distmap
+
+#
+# used for kernel drivers that don't show up in CURRENT or DISTMAP,
+# currently input drivers (joysticks, keyboards, etc). newer systems
+# should use input hotplug events instead.
+#
+MAP_HANDMAP=$HOTPLUG_DIR/usb.handmap
+
+#
+# used to run config scripts for user mode drivers (jPhoto, gPhoto2,
+# rio500 tools, etc) ... instead of naming kernel modules, it names
+# config scripts. those could change $DEVICE permissions, etc.
+#
+# for purely user mode drivers, scripts $HOTPLUG_DIR/usb/NAME should be
+# installed with usermap files in $HOTPLUG_DIR/usb/NAME.usermap instead
+# of continuing to use/modify $MAP_USERMAP
+#
+MAP_USERMAP=$HOTPLUG_DIR/usb.usermap
+
+
+# accumulates list of modules we may care about
+DRIVERS=""
+
+if [ "$ACTION" = "" ]; then
+ mesg Bad USB agent invocation, no action
+ exit 1
+fi
+
+# starting in kernel 2.5 there are two kinds of USB hotplug events.
+# - per-interface; 2.2/2.4 kernels only reported the first one.
+# "new" events have nonzero /sys/$DEVPATH/bInterfaceNumber
+# - per-device; "new" events don't have $PRODUCT
+SYSFS=/sys
+if [ "$PRODUCT" = "" ]; then
+ # this is either an error, or we're on a 2.5 system...
+ if [ "$DEVPATH" = "" ]; then
+ mesg Bad USB agent invocation
+ exit 1
+ fi
+
+ # sysfs files may already be gone
+ if [ $ACTION = 'remove' ]; then
+ exit 0
+ fi
+
+ # we could be running before usb populated these attributes...
+ if [ ! -f $SYSFS/$DEVPATH/bNumConfigurations ]; then
+ # FIXME wait till they appear, or N seconds elapse
+ sleep 2
+ fi
+
+ # this could care about changing the default config, or warning
+ # when the user hooked a fast device up so it runs slowly.
+ if [ ! -f $SYSFS/$DEVPATH/bNumConfigurations ]; then
+ exit 0
+ fi
+ TMP=$(cat $SYSFS/$DEVPATH/bNumConfigurations)
+ if [ $TMP -ne 1 ] && [ "$ACTION" = add ]; then
+ mesg Keeping default configuration with $SYSFS/$DEVPATH
+ fi
+
+ # NOTE: it might be good to add an extension hook here rather
+ # than ignore these events, but even device-scope tasks such
+ # as firmware download can still use the interface-0 event
+ # (as they did with 2.2/2.4 hotplug setup scripts).
+ exit 0
+fi
+
+# we can't "unset IFS" on bash1, so save a copy
+DEFAULT_IFS="$IFS"
+
+#
+# Each modules.usbmap format line corresponds to one entry in a
+# MODULE_DEVICE_TABLE(usb,...) declaration in a kernel file.
+#
+# Think of it as a database column with up to three "match specs"
+# to associate kernel modules with particular devices or classes
+# of device. The match specs provide a reasonably good filtering
+# mechanism, but some driver probe() routines need to provide
+# extra filtering.
+#
+
+usb_convert_vars ()
+{
+ # work around 2.2.early brokenness
+ # munges the usb_bcdDevice such that it is a integer rather
+ # than a float: e.g. 1.0 become 0100
+ PRODUCT=`echo $PRODUCT | sed -e "s+\.\([0-9]\)$+.\10+" -e "s/\.$/00/" \
+ -e "s+/\([0-9]\)\.\([0-9][0-9]\)+/0\1\2+" \
+ -e "s+/\([0-9][0-9]\)\.\([0-9][0-9]\)+/\1\2+"`
+ set $(echo $PRODUCT | sed -e 's+\([^/]*\)/\([^/]*\)/\(.*\)+\1 \2 \3+')
+ usb_idVendor=$((0x$1))
+ usb_idProduct=$((0x$2))
+ usb_bcdDevice=$((0x$3))
+
+ if [ "$TYPE" != "" ]; then
+ IFS=/
+ set $TYPE ''
+ usb_bDeviceClass=$1
+ usb_bDeviceSubClass=$2
+ usb_bDeviceProtocol=$3
+ IFS="$DEFAULT_IFS"
+ elif [ -r $SYSFS/$DEVPATH/bDeviceClass ]; then
+ usb_bDeviceClass=$((0x$(cat $SYSFS/$DEVPATH/bDeviceClass)))
+ usb_bDeviceSubClass=$((0x$(cat $SYSFS/$DEVPATH/bDeviceSubClass)))
+ usb_bDeviceProtocol=$((0x$(cat $SYSFS/$DEVPATH/bDeviceProtocol)))
+ else
+ # out-of-range values
+ usb_bDeviceClass=1000
+ usb_bDeviceSubClass=1000
+ usb_bDeviceProtocol=1000
+ fi
+
+ if [ "$INTERFACE" != "" ]; then
+ IFS=/
+ set $INTERFACE ''
+ usb_bInterfaceClass=$1
+ usb_bInterfaceSubClass=$2
+ usb_bInterfaceProtocol=$3
+ IFS="$DEFAULT_IFS"
+ elif [ -r $SYSFS/$DEVPATH/bInterfaceClass ]; then
+ usb_bInterfaceClass=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceClass)))
+ usb_bInterfaceSubClass=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceSubClass)))
+ usb_bInterfaceProtocol=$((0x$(cat $SYSFS/$DEVPATH/bInterfaceProtocol)))
+ else
+ # out-of-range values
+ usb_bInterfaceClass=1000
+ usb_bInterfaceSubClass=1000
+ usb_bInterfaceProtocol=1000
+ fi
+}
+
+USB_MATCH_VENDOR=$((0x0001))
+USB_MATCH_PRODUCT=$((0x0002))
+USB_MATCH_DEV_LO=$((0x0004))
+USB_MATCH_DEV_HI=$((0x0008))
+USB_MATCH_DEV_CLASS=$((0x0010))
+USB_MATCH_DEV_SUBCLASS=$((0x0020))
+USB_MATCH_DEV_PROTOCOL=$((0x0040))
+USB_MATCH_INT_CLASS=$((0x0080))
+USB_MATCH_INT_SUBCLASS=$((0x0100))
+USB_MATCH_INT_PROTOCOL=$((0x0200))
+
+#
+# stdin is "modules.usbmap" syntax
+# on return, all matching modules were added to $DRIVERS
+#
+usb_map_modules ()
+{
+ # look at each usb_device_id entry
+ # collect all matches in $DRIVERS
+
+ while read line
+ do
+ # comments are lines that start with "#" ...
+ # be careful, they still get parsed by bash!
+ case "$line" in
+ \#*) continue ;;
+ "") continue ;;
+ esac
+
+ set $line
+
+ module=$1
+ match_flags=$(($2))
+
+ idVendor=$(($3))
+ idProduct=$(($4))
+ bcdDevice_lo=$(($5))
+ bcdDevice_hi=$(($6))
+
+ bDeviceClass=$(($7))
+ bDeviceSubClass=$(($8))
+ bDeviceProtocol=$(($9))
+
+ shift 9
+ bInterfaceClass=$(($1))
+ bInterfaceSubClass=$(($2))
+ bInterfaceProtocol=$(($3))
+
+ : checkmatch $module
+
+ : idVendor $idVendor $usb_idVendor
+ if [ $USB_MATCH_VENDOR -eq $(( $match_flags & $USB_MATCH_VENDOR )) ] &&
+ [ $idVendor -ne $usb_idVendor ]; then
+ continue
+ fi
+
+ : idProduct $idProduct $usb_idProduct
+ if [ $USB_MATCH_PRODUCT -eq $(( $match_flags & $USB_MATCH_PRODUCT )) ] &&
+ [ $idProduct -ne $usb_idProduct ]; then
+ continue
+ fi
+
+ : bcdDevice range $bcdDevice_hi $bcdDevice_lo actual $usb_bcdDevice
+ if [ $USB_MATCH_DEV_LO -eq $(( $match_flags & $USB_MATCH_DEV_LO )) ] &&
+ [ $usb_bcdDevice -lt $bcdDevice_lo ]; then
+ continue
+ fi
+
+ # bcdDevice_lo <= bcdDevice <= bcdDevice_hi
+ if [ $USB_MATCH_DEV_HI -eq $(( $match_flags & $USB_MATCH_DEV_HI )) ] &&
+ [ $usb_bcdDevice -gt $bcdDevice_hi ]; then
+ continue
+ fi
+
+ : bDeviceClass $bDeviceClass $usb_bDeviceClass
+ if [ $USB_MATCH_DEV_CLASS -eq $(( $match_flags & $USB_MATCH_DEV_CLASS )) ] &&
+ [ $bDeviceClass -ne $usb_bDeviceClass ]; then
+ continue
+ fi
+ : bDeviceSubClass $bDeviceSubClass $usb_bDeviceSubClass
+ if [ $USB_MATCH_DEV_SUBCLASS -eq $(( $match_flags & $USB_MATCH_DEV_SUBCLASS )) ] &&
+ [ $bDeviceSubClass -ne $usb_bDeviceSubClass ]; then
+ continue
+ fi
+ : bDeviceProtocol $bDeviceProtocol $usb_bDeviceProtocol
+ if [ $USB_MATCH_DEV_PROTOCOL -eq $(( $match_flags & $USB_MATCH_DEV_PROTOCOL )) ] &&
+ [ $bDeviceProtocol -ne $usb_bDeviceProtocol ]; then
+ continue
+ fi
+
+ # NOTE: for now, this only checks the first of perhaps
+ # several interfaces for this device.
+
+ : bInterfaceClass $bInterfaceClass $usb_bInterfaceClass
+ if [ $USB_MATCH_INT_CLASS -eq $(( $match_flags & $USB_MATCH_INT_CLASS )) ] &&
+ [ $bInterfaceClass -ne $usb_bInterfaceClass ]; then
+ continue
+ fi
+ : bInterfaceSubClass $bInterfaceSubClass $usb_bInterfaceSubClass
+ if [ $USB_MATCH_INT_SUBCLASS -eq $(( $match_flags & $USB_MATCH_INT_SUBCLASS )) ] &&
+ [ $bInterfaceSubClass -ne $usb_bInterfaceSubClass ]; then
+ continue
+ fi
+ : bInterfaceProtocol $bInterfaceProtocol $usb_bInterfaceProtocol
+ if [ $USB_MATCH_INT_PROTOCOL -eq $(( $match_flags & $USB_MATCH_INT_PROTOCOL )) ] &&
+ [ $bInterfaceProtocol -ne $usb_bInterfaceProtocol ]; then
+ continue
+ fi
+
+ # It was a match!
+ DRIVERS="$module $DRIVERS"
+ : drivers $DRIVERS
+ done
+}
+
+#
+# declare a REMOVER name that the add action can use to create a
+# remover, or that the remove action can use to execute a remover.
+#
+if [ "$DEVPATH" != "" ]; then
+ # probably, 2.6.x
+ REMOVER=/var/run/usb/$(readlink -f $SYSFS/$DEVPATH | sed -e 's;/;%;g')
+elif [ "$DEVICE" != "" ]; then
+ # 2.4.x?
+ REMOVER=/var/run/usb/$(echo $DEVICE | sed -e 's;/;%;g')
+else
+ # should not happen?
+ REMOVER=/var/run/usb/$(echo "$INTERFACE/$PRODUCT/$TYPE" | sed -e 's;/;%;g')
+fi
+export REMOVER
+
+#
+# What to do with this USB hotplug event?
+#
+case $ACTION in
+
+add)
+ # partial workaround for 2.4 uhci/usb-uhci driver problem: they don't
+ # queue control requests, so device drivers can confuse each other if
+ # they happen to issue requests at the same time ... it happens easily
+ # with slow HID devices and "usbmodules".
+ # starting with 2.5 (DEVPATH set), all hcds must queue control traffic.
+ if [ "$DEVPATH" = "" ]; then
+ sleep 3
+ fi
+
+ usb_convert_vars
+
+ FOUND=false
+ if [ -f $SYSFS/$DEVPATH/manufacturer ]; then
+ LABEL="USB `cat $SYSFS/$DEVPATH/manufacturer` `cat $SYSFS/$DEVPATH/product`"
+ else
+ LABEL="USB product $PRODUCT"
+ fi
+
+ if [ -e "$REMOVER" ]; then
+ rm -f "$REMOVER"
+ fi
+
+ # on 2.4 systems, modutils 2.4.2+ maintains MAP_CURRENT
+ # ... otherwise we can't rely on it (sigh)
+ case "$KERNEL" in
+ 2.4.*|2.5.*|2.6.*)
+ if [ -r $MAP_CURRENT ]; then
+ load_drivers usb $MAP_CURRENT "$LABEL"
+ fi;;
+ *)
+ if [ -r $MAP_DISTMAP ]; then
+ load_drivers usb $MAP_DISTMAP "$LABEL"
+ fi;;
+ esac
+ if [ "$DRIVERS" != "" ]; then
+ FOUND=true
+ fi
+
+ # cope with special driver module configurations
+ # (mostly HID devices, until we have an input.agent)
+ # not needed on 2.6 - they are loaded by hotplug
+ case "$KERNEL" in
+ 2.6.* )
+ : nothing
+ ;;
+ * )
+ if [ -r $MAP_HANDMAP ]; then
+ load_drivers usb $MAP_HANDMAP "$LABEL"
+ if [ "$DRIVERS" != "" ]; then
+ FOUND=true
+ fi
+ fi
+ ;;
+ esac
+
+ # some devices have user-mode drivers (no kernel module, but config)
+ # or specialized user-mode setup helpers
+ MODPROBE=:
+ for MAP in $MAP_USERMAP $HOTPLUG_DIR/usb/*.usermap
+ do
+ if [ -r $MAP ]; then
+ load_drivers usb $MAP "$LABEL"
+ if [ "$DRIVERS" != "" ]; then
+ FOUND=true
+ fi
+ fi
+ done
+
+ if [ "$FOUND" = "false" ]; then
+ debug_mesg "... no modules for $LABEL"
+ exit 2
+ fi
+ ;;
+
+remove)
+ if [ -x $REMOVER ]; then
+ $REMOVER
+ fi
+ rm -f $REMOVER
+
+ if [ -x /usr/sbin/updfstab ]; then
+ /usr/sbin/updfstab
+ fi
+ ;;
+
+*)
+ debug_mesg USB $ACTION event not supported
+ exit 1
+ ;;
+
+esac
--- /dev/null
+# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
+iforce 0x0003 0x046d 0xc281 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+cpia_usb 0x0003 0x0553 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+acm 0x0070 0x0000 0x0000 0x0000 0x0000 0x02 0x00 0x00 0x00 0x00 0x00 0x00000000
+audio 0x0180 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x01 0x01 0x00 0x00000000
+bluetooth 0x0070 0x0000 0x0000 0x0000 0x0000 0xe0 0x01 0x01 0x00 0x00 0x00 0x00000000
+dabusb 0x0003 0x0547 0x2131 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dabusb 0x0003 0x0547 0x9999 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0120 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0130 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0131 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0132 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0110 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0111 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0x040a 0x0112 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dc2xx 0x0003 0xf003 0x6002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+dsbr100 0x0003 0x04b4 0x1002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+hid 0x0080 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x00 0x00 0x00000000
+ibmcam 0x000f 0x0545 0x8080 0x0002 0x0002 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ibmcam 0x000f 0x0545 0x8080 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x03e8 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0506 0x03e8 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0557 0x2002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0557 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0565 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0565 0x0005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x05e9 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x06e1 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0707 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x07aa 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x0846 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x13d2 0x0400 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x066b 0x2202 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x1645 0x0005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x2001 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+kaweth 0x0003 0x07b8 0x4000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+mdc800 0x0003 0x055f 0xa800 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x04ce 0x0300 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x0094 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x0099 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x009a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x00a0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x00a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x80a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+microtek 0x0003 0x05da 0x80ac 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ov511 0x0003 0x05a9 0x0511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ov511 0x0003 0x05a9 0xa511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ov511 0x0003 0x0813 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x083a 0x1046 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x07a6 0x8511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x07a6 0x0986 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x08dd 0x0986 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x08dd 0x0987 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x08dd 0x0988 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x08dd 0x8511 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x07aa 0x0004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x2001 0x4001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x2001 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x2001 0x4003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x2001 0xabc1 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x07b8 0xabc1 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x07b8 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x04bb 0x0904 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x056e 0x4002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x066b 0x2202 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x066b 0x2203 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x066b 0x2204 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x066b 0x2206 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x0411 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x0707 0x0200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+pegasus 0x0003 0x15e8 0x9100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x01 0x00 0x00 0x00 0x00000000
+printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x02 0x00 0x00 0x00 0x00000000
+printer 0x0070 0x0000 0x0000 0x0000 0x0000 0x07 0x01 0x03 0x00 0x00 0x00 0x00000000
+printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x01 0x00000000
+printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x02 0x00000000
+printer 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x07 0x01 0x03 0x00000000
+rio500 0x0003 0x0841 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a5 0x2060 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a5 0x2040 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a5 0x2022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x06bd 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x06bd 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x06bd 0x2061 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x06bd 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0458 0x2001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0205 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0105 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0102 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0401 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0701 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0201 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x03f0 0x0601 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0638 0x0268 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x0099 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x0094 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x00a0 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x009a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x00a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x80a3 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x05da 0x80ac 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x055f 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0400 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x055f 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x055f 0x0003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x055f 0x0006 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0300 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0380 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0301 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0381 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0302 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0382 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0303 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0383 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0340 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0360 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0341 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x0461 0x0361 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04b8 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04b8 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04b8 0x0104 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04b8 0x0106 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04b8 0x0107 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x1606 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x1606 0x0030 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x1606 0x0230 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0221 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0211 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0231 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0311 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0321 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+scanner 0x0003 0x04a7 0x0331 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+belkin_sa 0x0003 0x050d 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+belkin_sa 0x0003 0x056c 0x8007 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+belkin_sa 0x0003 0x0565 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+digi_acceleport 0x0003 0x05c5 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+digi_acceleport 0x0003 0x05c5 0x0004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+empeg 0x0003 0x084f 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ftdi_sio 0x0003 0x0403 0x8372 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+ftdi_sio 0x0003 0x0403 0x6001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0105 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0106 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0101 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0102 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0109 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0112 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0107 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0108 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x010f 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x0110 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan 0x0003 0x06cd 0x010a 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan_pda 0x0003 0x06cd 0x0103 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+keyspan_pda 0x0003 0x06cd 0x0104 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+mct_u232 0x0003 0x0711 0x0210 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+mct_u232 0x0003 0x0711 0x0230 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+mct_u232 0x0003 0x0711 0x0200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+omninet 0x0003 0x0586 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+visor 0x0003 0x082d 0x0100 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+whiteheat 0x0003 0x0710 0x8001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+whiteheat 0x0003 0x0710 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x03ee 0x0000 0x0000 0x0245 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x03f0 0x0107 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0001 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0002 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0006 0x0100 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0007 0x0100 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0009 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x000a 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x000b 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x000c 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x04e6 0x0101 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x054c 0x0010 0x0106 0x0210 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x054c 0x002d 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x057b 0x0000 0x0000 0x0299 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x057b 0x0000 0x0300 0x9999 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x059f 0xa601 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x05ab 0x0031 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0644 0x0000 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0693 0x0002 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0693 0x0005 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0781 0x0001 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0781 0x0100 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x0781 0x0002 0x0009 0x0009 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x07af 0x0004 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x000f 0x07af 0x0005 0x0100 0x0100 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x01 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x00 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x01 0x50 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x02 0x50 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x03 0x50 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x04 0x50 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x05 0x50 0x00000000
+usb-storage 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x08 0x06 0x50 0x00000000
+usb-storage 0x000f 0x0ea0 0x06803 0x0200 0x0200 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usbcore 0x0080 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x09 0x00 0x00 0x00000000
+usbnet 0x0003 0x0547 0x2720 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002a08
+usbnet 0x0003 0x0525 0x1080 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002cf0
+usbnet 0x0003 0x067b 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002d70
+usbnet 0x0003 0x067b 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00002d70
+uss720 0x0003 0x047e 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+uss720 0x0003 0x0557 0x2001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+uss720 0x0003 0x0729 0x1284 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+wacom 0x0003 0x056a 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+wacom 0x0003 0x056a 0x0020 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000001
+wacom 0x0003 0x056a 0x0021 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000002
+wacom 0x0003 0x056a 0x0022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000003
+wacom 0x0003 0x056a 0x0023 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000004
+wacom 0x0003 0x056a 0x0024 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000005
+stir4200 0x0003 0x066f 0x4200 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
--- /dev/null
+#
+# This file contains modutils format usbmap entries
+# with special driver mappings that the kernel
+# for some reason does not expose through modutils
+#
+# Comments get read by bash so dont use punctuation
+# RETEST ESPECIALLY AFER CHANGES TO COMMENTS
+#
+#
+# usbcore hub driver metadata passes different metadata than
+# policy agents see unless extra data from usbdevfs can be used
+#
+usbcore 0x0090 0x0000 0x0000 0x0000 0x0000 0x09 0x00 0x00 0x09 0x00 0x00 0x00000000
+#
+# recognize keyboard and mouse boot protocols to avoid
+# parsing all HID descriptors
+#
+keybdev 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x01 0x01 0x00000000
+mousedev 0x0380 0x0000 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x03 0x01 0x02 0x00000000
+#
+# In the big picture not many HID devices are keyboards or mice
+# HID device classes are defined with HID reports and so far
+# there is no hotplugging support for hid or the input subsystem
+#
+# This section mapping HID devices to their input subsystem
+# handlers will probably grow a lot
+#
+# FIXME describe each device by vendor and product name
+# PLEASE DO NOT SUBMIT ANY MORE PATCHES WITHOUT SUCH COMMENTS
+#
+mousedev 0x0003 0x05a4 0x9998 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+joydev 0x0003 0x046d 0xc207 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+joydev 0x0003 0x045e 0x0008 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+joydev 0x0003 0x047d 0x3002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+joydev 0x0003 0x07b5 0x9902 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Saitek Cyborg 3D USB
+joydev 0x0003 0x06a3 0x0006 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+#Gravis Gamepad Pro
+joydev 0x0003 0x0428 0x4001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+# Wacom tablets need "evdev" but don't depend on it;
+# XFree86 wacom_drv needs both.
+evdev 0x0003 0x056a 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0020 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0021 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0022 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0023 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0024 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0011 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+evdev 0x0003 0x056a 0x0042 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
+usblcd 0x0003 0x1212 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
--- /dev/null
+#!/bin/sh
+# vim: syntax=sh
+#
+# usb.rc This brings the USB subsystem up and down safely.
+#
+# $Id: usb.rc,v 1.28 2004/09/20 22:30:35 kroah Exp $
+#
+# Best invoked via /etc/init.d/hotplug or equivalent, with
+# writable /tmp, /usr mounted, and syslogging active.
+#
+# Bus management is basically unrelated to runlevel changes; it
+# relates to physical topology, including possibly hotpluggable
+# busses (USB, Cardbus) or controllers. If a bus is physically
+# present, it should normally be available.
+#
+# USB-dependant systems (iMacs, "legacy free" x86 systems, and so on)
+# should statically link USB keyboard support into the kernel (USB core,
+# EHCI/OHCI/UHCI/..., hid, input, keybdev; and likely mousedev) so the
+# system console can't be removed by accident.
+
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+unset I_WANT_A_BROKEN_PS
+PS_PERSONALITY=linux
+
+STATIC_MODULE_LIST=
+X11_USBMICE_HACK=false
+
+# override any of the defaults above?
+if [ -f /etc/sysconfig/usb ]; then
+ . /etc/sysconfig/usb
+fi
+if [ -f /etc/conf.d/usb ]; then
+ . /etc/conf.d/usb
+fi
+
+
+MOUSE_MODULES="mousedev input"
+
+# In its currently-recommended configuration, XFree86 3.3.6 always opens
+# /dev/input/mice; so mousedev and input must be loaded before X11 starts.
+if [ $X11_USBMICE_HACK = true ]; then
+ STATIC_MODULE_LIST="$MOUSE_MODULES $STATIC_MODULE_LIST"
+fi
+
+
+#
+# "COLD PLUG" ... recovery from partial USB init that may have happened
+# before the OS could really handle hotplug, perhaps because /sbin or
+# $HOTPLUG_DIR wasn't available or /tmp wasn't writable. When/if the
+# /sbin/hotplug program is invoked then, hotplug event notifications
+# get dropped. To make up for such "cold boot" errors, we synthesize
+# all the hotplug events we expect to have seen already. They can be
+# out of order, and some might be duplicates.
+#
+# Note that on 2.5 the init filesystem may have loaded some of the more
+# essential usb drivers (maybe usb-storage for a boot disk, and hid),
+# but we may still need to load less important ones or invoke setup
+# scripts that couldn't run earlier.
+#
+usb_boot_events ()
+{
+ #
+ # FIXME on 2.5, /sys/bus/usb/devices/* gives all of the
+ # info we need. Interface hotplug events come from the
+ # "*:*" files, and device events (do them first) come
+ # from the others.
+ #
+ # don't expect usbmodules to exist!! and remove the
+ # dependency (below) on usbfs to decide whether we should
+ # be synthesizing coldplug events.
+ #
+
+ # synthesize hotplug events if we can
+
+ # make sure the usb agent will run
+ ACTION=add
+ PRODUCT=0/0/0
+ TYPE=
+ INTERFACE=
+ DEVPATH=
+ DEVFS=/proc/bus/usb
+ DEVICE=
+ export ACTION PRODUCT TYPE INTERFACE DEVPATH DEVFS DEVICE
+
+ if [ -d /sys/bus ]; then
+ if [ -d /sys/bus/usb/devices ]; then
+ cd /sys/bus/usb/devices
+ for device in /sys/bus/usb/devices/[0-9]*; do
+ devlink=$( readlink -f $device )
+ DEVPATH=${devlink#/sys}
+ if [ -f $devlink/../idVendor ]; then
+ PRODUCT="$(cat $devlink/../idVendor)/$(cat $devlink/../idProduct)/$(cat $devlink/../bcdDevice)"
+ if [ -f $devlink/../../devnum ]
+ then
+ devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | grep -o ...\$ )
+ devdev=$( ( echo -n 000 ; cat $devlink/../devnum ) | grep -o ...\$ )
+ DEVICE="/proc/bus/usb/$devbus/$devdev"
+ else
+ DEVICE=
+ fi
+ /etc/hotplug/usb.agent
+ fi
+ done
+ fi
+ else
+ # we need (non-bash) programs to parse descriptors.
+ LISTER=`which usbmodules`
+ if [ "$LISTER" = "" ] || [ ! -f /proc/bus/usb/devices ]; then
+ echo $"** can't synthesize root hub events"
+ return
+ fi
+ for DEVICE in /proc/bus/usb/*/*; do
+ /etc/hotplug/usb.agent
+ done
+ fi
+}
+
+
+maybe_start_usb ()
+{
+ COUNT=0
+
+ # if USB is partially initted then synthesize "cold plug" events. the
+ # kernel probably dropped many "hot plug" events, and those it didn't
+ # drop likely couldn't trigger all the setup actions (kicking daemons,
+ # dropping config records, and so on).
+
+ # if it's not initted at all (no hcds loaded) no synthesized events
+ # will be needed, we'll see real ones. knowing that there are no
+ # hcds available through version-portable logic is a nightmare, so
+ # assume we synthesize unless "usbfs" is clearly not initted (which
+ # we currently need when synthesizing, anyway).
+
+ SYNTHESIZE=true
+ if [ ! -d /proc/bus/usb ]; then
+ SYNTHESIZE=false
+ fi
+
+ # if distro hasn't already done part of this ... load core,
+ # and mount usbfs before the first hotplug agent fires
+ # (so it'll be available to the agents).
+ modprobe -q usbcore >/dev/null 2>&1
+ if [ -d /proc/bus/usb ]; then
+ # if it's not mounted, try to mount it
+ if [ -z "`grep " /proc/bus/usb " /proc/mounts`" ]; then
+ if grep -q -E "^[^#][^[:space:]]+[[:space:]]+/proc/bus/usb/?[[:space:]]" /etc/fstab; then
+ mount /proc/bus/usb
+ else
+ if grep -q usbfs /proc/filesystems; then
+ mount -t usbfs usbfs /proc/bus/usb
+ else
+ mount -t usbdevfs usbdevfs /proc/bus/usb
+ fi
+ fi
+ fi
+ fi
+
+ # Load Host Controller Drivers (HCDs) ... this automatically handles
+ # systems with multiple controllers (EHCI, OHCI, UHCI) without needing
+ # /proc or tools (lspci -v|grep USB, etc) to do so. If hotplugging
+ # is enabled on this system, initting a root hub will cause hotplug
+ # events to fire for every device on the tree at that root.
+
+ # FIXME: some of this should be driven by PCI hotplugging, and have
+ # the blacklist control which uhci driver gets used (before 2.5).
+
+ # "new style" HCDs ... more common code
+ modprobe -q ehci-hcd >/dev/null 2>&1
+ modprobe -q ohci-hcd >/dev/null 2>&1
+ modprobe -q uhci-hcd >/dev/null 2>&1
+
+ # "old style" HCDs ... more driver-specific bugs
+ modprobe -q usb-ohci >/dev/null 2>&1
+ # NOTE: this prefers "uhci"; you may prefer "usb-uhci".
+ # modprobe -q usb-uhci >/dev/null 2>&1 || modprobe -q uhci >/dev/null 2>&1
+ modprobe -q uhci >/dev/null 2>&1 || modprobe -q usb-uhci >/dev/null 2>&1
+
+ # ... add any non-PCI HCDS here. Examples include the
+ # CRIS usb-host, Philips ISP-1161, Symlogic 811HS, and so on.
+ # ohci-hcd can handle some non-pci variants.
+
+ if [ -d /proc/bus/usb ]; then
+ # If we see there are no busses, we "failed" and
+ # can report so even if we're partially nonmodular.
+ #
+ # NOTE: this fails on older kernels, where usbdevfs had two files
+ # ('devices' and 'drivers') with no hcds registered, but works on
+ # newer kernels where usbfs has zero files until hcds register,
+ # and might not have the 'drivers' file.
+ COUNT=`ls /proc/bus/usb | wc -l`
+ if [ $COUNT -lt 2 ]; then
+ umount /proc/bus/usb
+ rmmod usbcore >/dev/null 2>&1
+ return 1
+ fi
+
+ # if USB is fully modular and yet can clean up,
+ # we know init failed without needing usbfs
+ elif rmmod usbcore >/dev/null 2>&1; then
+ return 1
+ fi
+
+ # hotplug events didn't fire during booting;
+ # cope with devices that enumerated earlier
+ # and may not have been fully configured.
+ if [ $SYNTHESIZE = true ]; then
+ sleep 1
+ usb_boot_events
+ fi
+
+ # Some modules are statically loaded, perhaps because they are
+ # needed to activate filesystem device nodes.
+ for MODULE in $STATIC_MODULE_LIST; do
+ modprobe $MODULE
+ done
+
+ # we did everything we could ...
+ return 0
+}
+
+maybe_stop_usb ()
+{
+ # call this multiple times if you had to take down components of the
+ # USB subsystem by hand; it cleans up whatever can
+ # be cleaned up, letting the system quiesce further.
+
+ # NOTE: this list of "all USB modules" is unfortunate, but it seems
+ # inevitable until modutils supports the notion of drivers with use
+ # counts of zero that shouldn't be removed until after their device
+ # gets removed. Maybe in 2.5 ... of necessity, the list is partial.
+
+ # disconnect all controllers we can, and kernel drivers
+ # HCDs first, so most drivers reduce their use counts.
+ rmmod ehci-hcd >/dev/null 2>&1
+ rmmod ohci-hcd >/dev/null 2>&1
+ rmmod uhci-hcd >/dev/null 2>&1
+ rmmod usb-ohci >/dev/null 2>&1
+ rmmod usb-uhci >/dev/null 2>&1
+ rmmod uhci >/dev/null 2>&1
+
+ # user mode code may keep usbfs busy for a while yet ...
+
+ # OK, usbcore won't actually be removed unless there happen to be
+ # no USB drivers loaded, and usbfs isn't mounted. let's force
+ # removal of autocleanable modules before trying to rmmod usbcore
+ rmmod -as
+# note: module-init-tools 0.8a doesn't handle "-as" flags
+
+ # Now let's workaround the fact that some USB modules never increase
+ # their module use counts, so that "rmmod -a" won't unload them.
+ # (And we can't use "modprobe --autoclean" anyway.)
+ rmmod acm >/dev/null 2>&1
+ rmmod audio >/dev/null 2>&1
+ rmmod auerswald >/dev/null 2>&1
+ rmmod belkin_sa >/dev/null 2>&1
+ rmmod bluetooth >/dev/null 2>&1
+ rmmod catc >/dev/null 2>&1
+ rmmod CDCEther >/dev/null 2>&1
+ rmmod cpia_usb >/dev/null 2>&1
+ rmmod cyberjack >/dev/null 2>&1
+ rmmod dabusb >/dev/null 2>&1
+ rmmod dc2xx >/dev/null 2>&1
+ rmmod digi_acceleport >/dev/null 2>&1
+ rmmod dsbr100 >/dev/null 2>&1
+ rmmod emi26 >/dev/null 2>&1
+ rmmod empeg >/dev/null 2>&1
+ rmmod ftdi_sio >/dev/null 2>&1
+ rmmod hci_usb >/dev/null 2>&1
+ rmmod hid >/dev/null 2>&1
+ rmmod hpusbscsi >/dev/null 2>&1
+ rmmod ibmcam >/dev/null 2>&1
+ rmmod iforce >/dev/null 2>&1
+ rmmod io_edgeport >/dev/null 2>&1
+ rmmod ipaq >/dev/null 2>&1
+ rmmod ir-usb >/dev/null 2>&1
+ rmmod irda-usb >/dev/null 2>&1
+ rmmod kaweth >/dev/null 2>&1
+ rmmod keyspan >/dev/null 2>&1
+ rmmod keyspan_pda >/dev/null 2>&1
+ rmmod kl5kusb105 >/dev/null 2>&1
+ rmmod mct_u232 >/dev/null 2>&1
+ rmmod mdc800 >/dev/null 2>&1
+ rmmod microtek >/dev/null 2>&1
+ rmmod omninet >/dev/null 2>&1
+ rmmod ov511 >/dev/null 2>&1
+ rmmod pegasus >/dev/null 2>&1
+ rmmod pl2303 >/dev/null 2>&1
+ rmmod printer >/dev/null 2>&1
+ rmmod pwc pwcx >/dev/null 2>&1
+ rmmod rio500 >/dev/null 2>&1
+ rmmod rtl8150 >/dev/null 2>&1
+ rmmod scanner >/dev/null 2>&1
+ rmmod se401 >/dev/null 2>&1
+ rmmod stv680 >/dev/null 2>&1
+ rmmod usbhid >/dev/null 2>&1
+ rmmod usbkbd >/dev/null 2>&1
+ rmmod usbmouse >/dev/null 2>&1
+ rmmod usbnet >/dev/null 2>&1
+ rmmod usbtest >/dev/null 2>&1
+ rmmod usb-storage >/dev/null 2>&1
+ rmmod uss720 >/dev/null 2>&1
+ rmmod vicam >/dev/null 2>&1
+ rmmod visor >/dev/null 2>&1
+ rmmod wacom >/dev/null 2>&1
+ rmmod whiteheat >/dev/null 2>&1
+
+ if [ "$STATIC_MODULE_LIST" != "" ]; then
+ rmmod $STATIC_MODULE_LIST >/dev/null 2>&1
+ fi
+
+ # remove the helper modules that some usb modules need
+ rmmod usbserial >/dev/null 2>&1
+ rmmod usbvideo >/dev/null 2>&1
+
+ # ok, hope that user mode drivers/managers closed their fds.
+ umount /proc/bus/usb >/dev/null 2>&1
+
+ rmmod usbcore >/dev/null 2>&1
+
+ # we did everything we could ...
+ return 0;
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ maybe_start_usb
+ ;;
+ stop)
+ maybe_stop_usb
+ ;;
+ status)
+ echo $"USB Status for kernel: " `uname -srm`
+ echo ''
+
+ if [ -f /proc/bus/usb/devices ]; then
+ # as noted above: this fails on older kernels,
+ # where usbfs created files differently.
+ COUNT=`ls /proc/bus/usb | wc -l`
+ if [ $COUNT -ge 2 ]; then
+ COUNT=`expr $COUNT - 2`
+ echo $"USB up; bus count is $COUNT"
+ grep "^[TPSI]:" /proc/bus/usb/devices
+ else
+ echo $"usbfs partially up; no busses"
+ fi
+ echo ''
+
+ echo $"USB Drivers Loaded: "
+ if [ -f /proc/bus/usb/drivers ]; then
+ cat /proc/bus/usb/drivers
+ fi
+ if [ -d /sys/bus/usb ]; then
+ ls -1 /sys/bus/usb/drivers
+ fi
+ else
+ echo $"usbfs is unavailable. "
+ if [ -f /proc/modules ] && grep -F -q usbcore /proc/modules; then
+ echo $"USB module is loaded. "
+ else
+ echo $"USB may be statically linked. "
+ fi
+ echo $"If khubd is running, that shows USB is available."
+ fi
+ echo ''
+
+ if [ -f /proc/sys/kernel/hotplug ]; then
+ echo $"khubd/hotplug thread: "
+ else
+ echo $"khubd thread:"
+ fi
+ ps -l | head -n 1
+ ps -Al | grep 'khubd' | grep -v grep
+ echo ''
+
+ lsmod
+ echo ''
+
+ # /proc/devices too? "usb", "input", and others ...
+
+ ;;
+ restart)
+ # always invoke by absolute path, else PATH=$PATH:
+ $0 stop && $0 start
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|status|restart}"
+ exit 1
+esac
--- /dev/null
+# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/hotplug/files/hotplug.rc.empty,v 1.3 2005/01/27 18:29:26 wolf31o2 Exp $
+
+#
+# nothing here anymore. Please use the coldplug package if you really want to
+# load modules for devices that are discovered by your kernel before init runs.
+#
+# However, please realize that if you have any problems, the developers
+# recommend just using the modules.autoload functionality to handle this in a
+# much simpler manner.
+#
+# Comments, flames, and fine beer should be directed at gregkh@gentoo.org
+#
+
+depend() {
+ need modules
+}
+
+start () {
+ # just verify that people build their kernel with hotplug support.
+ if [ ! -f /proc/sys/kernel/hotplug ] ; then
+ eerror "CONFIG_HOTPLUG not enabled for this kernel!"
+ return 1
+ fi
+ # This unpacks any firmware tarballs. Used for LiveCD.
+ if [ -e /lib/firmware.tar.bz2 ]
+ then
+ ebegin "Unpacking hotplug firmware"
+ tar xjf /lib/firmware.tar.bz2 -C /lib/firmware
+ eend 0
+ fi
+}
projects / config / bruni / etc.git / commitdiff