#
-# "$Id: cupsd.conf.in 11025 2013-06-07 01:00:33Z msweet $"
-#
-# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# Configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
#
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
+PageLogFormat
# Only listen for connections from the local machine.
Listen localhost:631
Order deny,allow
</Limit>
</Policy>
-
-#
-# End of "$Id: cupsd.conf.in 11025 2013-06-07 01:00:33Z msweet $".
-#
-# Show general information in error_log.
+#
+# "$Id: cupsd.conf.in 11025 2013-06-07 01:00:33Z msweet $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
LogLevel warn
+
+# Only listen for connections from the local machine.
Listen localhost:631
Listen 10.12.11.2:631
Listen /var/run/cups/cups.sock
Browsing On
BrowseLocalProtocols CUPS dnssd
+#BrowseLocalProtocols dnssd
+
+# Default authentication type, when authentication is required...
DefaultAuthType Basic
+
+# Web interface setting...
WebInterface Yes
+
+# Restrict access to the server...
<Location />
Order allow,deny
Allow @LOCAL
</Location>
+
+# Restrict access to the admin pages...
<Location /admin>
Encryption Required
Order allow,deny
Allow @LOCAL
</Location>
+
+# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow @LOCAL
</Location>
+
+# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
+
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
+
+ # All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
+
+ # All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
+
<Limit All>
Order deny,allow
</Limit>
</Policy>
+
+# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
+
+ # Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
+
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
+
+ # All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
+
+ # All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
+
<Limit All>
Order deny,allow
</Limit>
</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 11025 2013-06-07 01:00:33Z msweet $".
+#
-#
-# "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $"
-#
-# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
-# complete description of this file.
-#
-
-# Log general information in error_log - change "warn" to "debug"
-# for troubleshooting...
-LogLevel debug
-
-# Administrator user group...
-SystemGroup lpadmin
-
-
-# Only listen for connections from the local machine.
+# Show general information in error_log.
+LogLevel warn
Listen localhost:631
Listen 10.12.11.2:631
-# Port 631
Listen /var/run/cups/cups.sock
-AccessLog /var/log/cups/access.log
-ErrorLog /var/log/cups/error.log
-PageLog /var/log/cups/page.log
-# Show shared printers on the local network.
Browsing On
-# We switch this off by default in Gentoo, to avoid an unnecessary open port.
-#Browsing Off
-BrowseOrder allow,deny
-BrowseAllow all
-# BrowseLocalProtocols CUPS
BrowseLocalProtocols CUPS dnssd
-
-# Default authentication type, when authentication is required...
DefaultAuthType Basic
-
-# Web interface setting...
WebInterface Yes
-
-# Restrict access to the server...
<Location />
Order allow,deny
Allow @LOCAL
</Location>
-
-# Restrict access to the admin pages...
<Location /admin>
Encryption Required
Order allow,deny
Allow @LOCAL
</Location>
-
-# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow @LOCAL
</Location>
-
-# Set the default printer/job policies...
<Policy default>
- # Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
-
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
-
- # All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
-
- # All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
-
<Limit All>
Order deny,allow
</Limit>
</Policy>
-
-# Set the authenticated printer/job policies...
<Policy authenticated>
- # Job/subscription privacy...
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
-
- # Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
-
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
-
- # All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
-
- # All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
-
- # Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
-
<Limit All>
Order deny,allow
</Limit>
</Policy>
-
-#
-# End of "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $".
-#
#
-# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
+# "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
-LogLevel info
+LogLevel debug
# Administrator user group...
SystemGroup lpadmin
</Policy>
#
-# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
+# End of "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $".
#
#
-# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
PageLog /var/log/cups/page.log
# Show shared printers on the local network.
Browsing On
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+#Browsing Off
BrowseOrder allow,deny
BrowseAllow all
-BrowseLocalProtocols CUPS
+# BrowseLocalProtocols CUPS
+BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
+# Web interface setting...
+WebInterface Yes
+
# Restrict access to the server...
<Location />
- # Allow remote administration...
Order allow,deny
Allow @LOCAL
</Location>
# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Policy>
#
-# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
#
--- /dev/null
+#
+# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+#
+# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
+# complete description of this file.
+#
+
+# Log general information in error_log - change "warn" to "debug"
+# for troubleshooting...
+LogLevel info
+
+# Administrator user group...
+SystemGroup lpadmin
+
+
+# Only listen for connections from the local machine.
+Listen localhost:631
+Listen 10.12.11.2:631
+# Port 631
+Listen /var/run/cups/cups.sock
+AccessLog /var/log/cups/access.log
+ErrorLog /var/log/cups/error.log
+PageLog /var/log/cups/page.log
+# Show shared printers on the local network.
+Browsing On
+BrowseOrder allow,deny
+BrowseAllow all
+BrowseLocalProtocols CUPS
+
+# Default authentication type, when authentication is required...
+DefaultAuthType Basic
+
+# Restrict access to the server...
+<Location />
+ # Allow remote administration...
+ Order allow,deny
+ Allow @LOCAL
+</Location>
+
+# Restrict access to the admin pages...
+<Location /admin>
+ Encryption Required
+ Order allow,deny
+ Allow @LOCAL
+</Location>
+
+# Restrict access to configuration files...
+<Location /admin/conf>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+ Allow @LOCAL
+</Location>
+
+# Set the default printer/job policies...
+<Policy default>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+# Set the authenticated printer/job policies...
+<Policy authenticated>
+ # Job-related operations must be done by the owner or an administrator...
+ <Limit Create-Job Print-Job Print-URI Validate-Job>
+ AuthType Default
+ Order deny,allow
+ </Limit>
+
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All administration operations require an administrator to authenticate...
+ <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # All printer operations require a printer operator to authenticate...
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ AuthType Default
+ Require user @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ # Only the owner or an administrator can cancel or authenticate a job...
+ <Limit Cancel-Job CUPS-Authenticate-Job>
+ AuthType Default
+ Require user @OWNER @SYSTEM
+ Order deny,allow
+ </Limit>
+
+ <Limit All>
+ Order deny,allow
+ </Limit>
+</Policy>
+
+#
+# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+#
Order allow,deny
</Location>
+# Restrict access to log files...
+<Location /admin/log>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
# Modified by: Mike Frysinger, <vapier@gentoo.org>
# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
#
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.1 2010/01/08 16:55:07 williamh Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.2 2013/04/20 03:51:26 vapier Exp $
# Default runlevel.
id:3:initdefault:
c6:2345:respawn:/sbin/agetty 38400 tty6 linux
# SERIAL CONSOLES
-#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
-#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100
+#s0:12345:respawn:/sbin/agetty -L 115200 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty -L 115200 ttyS1 vt100
# What to do at the "Three Finger Salute".
ca:12345:ctrlaltdel:/sbin/shutdown -r now
# extra at boot if /etc/init.d/xdm is not added
# to the "default" runlevel.
x:a:once:/etc/X11/startDM.sh
-
--- /dev/null
+#
+# /etc/inittab: This file describes how the INIT process should set up
+# the system in a certain run-level.
+#
+# Author: Miquel van Smoorenburg, <miquels@cistron.nl>
+# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com>
+# Modified by: Daniel Robbins, <drobbins@gentoo.org>
+# Modified by: Martin Schlemmer, <azarah@gentoo.org>
+# Modified by: Mike Frysinger, <vapier@gentoo.org>
+# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
+#
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.1 2010/01/08 16:55:07 williamh Exp $
+
+# Default runlevel.
+id:3:initdefault:
+
+# System initialization, mount local filesystems, etc.
+si::sysinit:/sbin/rc sysinit
+
+# Further system initialization, brings up the boot runlevel.
+rc::bootwait:/sbin/rc boot
+
+l0:0:wait:/sbin/rc shutdown
+l0s:0:wait:/sbin/halt -dhp
+l1:1:wait:/sbin/rc single
+l2:2:wait:/sbin/rc nonetwork
+l3:3:wait:/sbin/rc default
+l4:4:wait:/sbin/rc default
+l5:5:wait:/sbin/rc default
+l6:6:wait:/sbin/rc reboot
+l6r:6:wait:/sbin/reboot -dk
+#z6:6:respawn:/sbin/sulogin
+
+# new-style single-user
+su0:S:wait:/sbin/rc single
+su1:S:wait:/sbin/sulogin
+
+# TERMINALS
+c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux
+c2:2345:respawn:/sbin/agetty 38400 tty2 linux
+c3:2345:respawn:/sbin/agetty 38400 tty3 linux
+c4:2345:respawn:/sbin/agetty 38400 tty4 linux
+c5:2345:respawn:/sbin/agetty 38400 tty5 linux
+c6:2345:respawn:/sbin/agetty 38400 tty6 linux
+
+# SERIAL CONSOLES
+#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100
+
+# What to do at the "Three Finger Salute".
+ca:12345:ctrlaltdel:/sbin/shutdown -r now
+
+# Used by /etc/init.d/xdm to control DM startup.
+# Read the comments in /etc/init.d/xdm for more
+# info. Do NOT remove, as this will start nothing
+# extra at boot if /etc/init.d/xdm is not added
+# to the "default" runlevel.
+x:a:once:/etc/X11/startDM.sh
+
# Modified by: Martin Schlemmer, <azarah@gentoo.org>
# Modified by: Mike Frysinger, <vapier@gentoo.org>
# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
+# Modified by: William Hubbs, <williamh@gentoo.org>
#
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.2 2013/04/20 03:51:26 vapier Exp $
+# $Id$
# Default runlevel.
id:3:initdefault:
# System initialization, mount local filesystems, etc.
-si::sysinit:/sbin/rc sysinit
+si::sysinit:/sbin/openrc sysinit
# Further system initialization, brings up the boot runlevel.
-rc::bootwait:/sbin/rc boot
-
-l0:0:wait:/sbin/rc shutdown
-l0s:0:wait:/sbin/halt -dhp
-l1:1:wait:/sbin/rc single
-l2:2:wait:/sbin/rc nonetwork
-l3:3:wait:/sbin/rc default
-l4:4:wait:/sbin/rc default
-l5:5:wait:/sbin/rc default
-l6:6:wait:/sbin/rc reboot
-l6r:6:wait:/sbin/reboot -dk
+rc::bootwait:/sbin/openrc boot
+
+l0:0:wait:/sbin/openrc shutdown
+l0s:0:wait:/sbin/halt -dhnp
+l1:1:wait:/sbin/openrc single
+l2:2:wait:/sbin/openrc nonetwork
+l3:3:wait:/sbin/openrc default
+l4:4:wait:/sbin/openrc default
+l5:5:wait:/sbin/openrc default
+l6:6:wait:/sbin/openrc reboot
+l6r:6:wait:/sbin/reboot -dkn
#z6:6:respawn:/sbin/sulogin
# new-style single-user
-su0:S:wait:/sbin/rc single
+su0:S:wait:/sbin/openrc single
su1:S:wait:/sbin/sulogin
# TERMINALS
+#x1:12345:respawn:/sbin/agetty 38400 console linux
c1:12345:respawn:/sbin/agetty 38400 tty1 linux
c2:2345:respawn:/sbin/agetty 38400 tty2 linux
c3:2345:respawn:/sbin/agetty 38400 tty3 linux
# The format for a filter is one of:
# x:name
# x:+name
-# where name is a string which is matched against source file name,
-# e.g., "remote", "qemu", or "util/json", the optional "+" prefix
-# tells libvirt to log stack trace for each message matching name,
-# and x is the minimal level where matching messages should be logged:
+
+# where name is a string which is matched against the category
+# given in the VIR_LOG_INIT() at the top of each libvirt source
+# file, e.g., "remote", "qemu", or "util.json" (the name in the
+# filter can be a substring of the full category name, in order
+# to match multiple similar categories), the optional "+" prefix
+# tells libvirt to log stack trace for each message matching
+# name, and x is the minimal level where matching messages should
+# be logged:
+
# 1: DEBUG
# 2: INFO
# 3: WARNING
#
#keepalive_interval = 5
#keepalive_count = 5
+
#
-# If set to 1, libvirtd will refuse to talk to clients that do not
-# support keepalive protocol. Defaults to 0.
+# These configuration options are no longer used. There is no way to
+# restrict such clients from connecting since they first need to
+# connect in order to ask for keepalive.
#
#keepalive_required = 1
+#admin_keepalive_required = 1
# Keepalive settings for the admin interface
#admin_keepalive_interval = 5
#admin_keepalive_count = 5
-#
-#admin_keepalive_required = 1
# control, then you may want to relax this too.
#unix_sock_rw_perms = "0770"
+# Set the UNIX socket permissions for the admin interface socket.
+#
+# Default allows only owner (root), do not change it unless you are
+# sure to whom you are exposing the access to.
+#unix_sock_admin_perms = "0700"
+
# Set the name of the directory in which sockets will be found/created.
#unix_sock_dir = "/var/run/libvirt"
+
+
#################################################################
#
# Authentication.
# and max_workers parameter
#max_client_requests = 5
+# Same processing controls, but this time for the admin interface.
+# For description of each option, be so kind to scroll few lines
+# upwards.
+
+#admin_min_workers = 1
+#admin_max_workers = 5
+#admin_max_clients = 5
+#admin_max_queued_clients = 5
+#admin_max_client_requests = 5
+
#################################################################
#
# Logging controls
# support keepalive protocol. Defaults to 0.
#
#keepalive_required = 1
+
+# Keepalive settings for the admin interface
+#admin_keepalive_interval = 5
+#admin_keepalive_count = 5
+#
+#admin_keepalive_required = 1
--- /dev/null
+# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+#
+# NOTE: the tests/daemon-conf regression test script requires
+# that each "PARAMETER = VALUE" line in this file have the parameter
+# name just after a leading "#".
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+#listen_tls = 0
+
+# Listen for unencrypted TCP connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# Using the TCP socket requires SASL authentication by default. Only
+# SASL mechanisms which support data encryption are allowed. This is
+# DIGEST_MD5 and GSSAPI (Kerberos5)
+#
+# This is disabled by default, uncomment this to enable it.
+listen_tcp = 1
+
+
+
+# Override the port for accepting secure TLS connections
+# This can be a port number, or service name
+#
+#tls_port = "16514"
+
+# Override the port for accepting insecure TCP connections
+# This can be a port number, or service name
+#
+tcp_port = "1611"
+
+
+# Override the default configuration which binds to all network
+# interfaces. This can be a numeric IPv4/6 address, or hostname
+#
+# If the libvirtd service is started in parallel with network
+# startup (e.g. with systemd), binding to addresses other than
+# the wildcards (0.0.0.0/::) might not be available yet.
+#
+#listen_addr = "192.168.0.1"
+listen_addr = "127.0.0.1"
+
+
+# Flag toggling mDNS advertizement of the libvirt service.
+#
+# Alternatively can disable for all services on a host by
+# stopping the Avahi daemon
+#
+# This is disabled by default, uncomment this to enable it
+#mdns_adv = 1
+
+# Override the default mDNS advertizement name. This must be
+# unique on the immediate broadcast network.
+#
+# The default is "Virtualization Host HOSTNAME", where HOSTNAME
+# is substituted for the short hostname of the machine (without domain)
+#
+#mdns_name = "Virtualization Host Joe Demo"
+
+
+#################################################################
+#
+# UNIX socket access controls
+#
+
+# Beware that if you are changing *any* of these options, and you use
+# socket activation with systemd, you need to adjust the settings in
+# the libvirtd.socket file as well since it could impose a security
+# risk if you rely on file permission checking only.
+
+# Set the UNIX domain socket group ownership. This can be used to
+# allow a 'trusted' set of users access to management capabilities
+# without becoming root.
+#
+# This is restricted to 'root' by default.
+unix_sock_group = "libvirt"
+
+# Set the UNIX socket permissions for the R/O socket. This is used
+# for monitoring VM status only
+#
+# Default allows any user. If setting group ownership, you may want to
+# restrict this too.
+#unix_sock_ro_perms = "0777"
+
+# Set the UNIX socket permissions for the R/W socket. This is used
+# for full management of VMs
+#
+# Default allows only root. If PolicyKit is enabled on the socket,
+# the default will change to allow everyone (eg, 0777)
+#
+# If not using PolicyKit and setting group ownership for access
+# control, then you may want to relax this too.
+#unix_sock_rw_perms = "0770"
+
+# Set the name of the directory in which sockets will be found/created.
+#unix_sock_dir = "/var/run/libvirt"
+
+#################################################################
+#
+# Authentication.
+#
+# - none: do not perform auth checks. If you can connect to the
+# socket you are allowed. This is suitable if there are
+# restrictions on connecting to the socket (eg, UNIX
+# socket permissions), or if there is a lower layer in
+# the network providing auth (eg, TLS/x509 certificates)
+#
+# - sasl: use SASL infrastructure. The actual auth scheme is then
+# controlled from /etc/sasl2/libvirt.conf. For the TCP
+# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+# For non-TCP or TLS sockets, any scheme is allowed.
+#
+# - polkit: use PolicyKit to authenticate. This is only suitable
+# for use on the UNIX sockets. The default policy will
+# require a user to supply their own password to gain
+# full read/write access (aka sudo like), while anyone
+# is allowed read/only access.
+#
+# Set an authentication scheme for UNIX read-only sockets
+# By default socket permissions allow anyone to connect
+#
+# To restrict monitoring of domains you may wish to enable
+# an authentication mechanism here
+#auth_unix_ro = "none"
+
+# Set an authentication scheme for UNIX read-write sockets
+# By default socket permissions only allow root. If PolicyKit
+# support was compiled into libvirt, the default will be to
+# use 'polkit' auth.
+#
+# If the unix_sock_rw_perms are changed you may wish to enable
+# an authentication mechanism here
+#auth_unix_rw = "none"
+auth_unix_rw = "polkit"
+#auth_unix_rw = "sasl"
+
+# Change the authentication scheme for TCP sockets.
+#
+# If you don't enable SASL, then all TCP traffic is cleartext.
+# Don't do this outside of a dev/test scenario. For real world
+# use, always enable SASL and use the GSSAPI or DIGEST-MD5
+# mechanism in /etc/sasl2/libvirt.conf
+#auth_tcp = "sasl"
+
+# Change the authentication scheme for TLS sockets.
+#
+# TLS sockets already have encryption provided by the TLS
+# layer, and limited authentication is done by certificates
+#
+# It is possible to make use of any SASL authentication
+# mechanism as well, by using 'sasl' for this option
+#auth_tls = "none"
+
+
+# Change the API access control scheme
+#
+# By default an authenticated user is allowed access
+# to all APIs. Access drivers can place restrictions
+# on this. By default the 'nop' driver is enabled,
+# meaning no access control checks are done once a
+# client has authenticated with libvirtd
+#
+#access_drivers = [ "polkit" ]
+
+#################################################################
+#
+# TLS x509 certificate configuration
+#
+
+
+# Override the default server key file path
+#
+#key_file = "/etc/pki/libvirt/private/serverkey.pem"
+
+# Override the default server certificate file path
+#
+#cert_file = "/etc/pki/libvirt/servercert.pem"
+
+# Override the default CA certificate path
+#
+#ca_file = "/etc/pki/CA/cacert.pem"
+
+# Specify a certificate revocation list.
+#
+# Defaults to not using a CRL, uncomment to enable it
+#crl_file = "/etc/pki/CA/crl.pem"
+
+
+
+#################################################################
+#
+# Authorization controls
+#
+
+
+# Flag to disable verification of our own server certificates
+#
+# When libvirtd starts it performs some sanity checks against
+# its own certificates.
+#
+# Default is to always run sanity checks. Uncommenting this
+# will disable sanity checks which is not a good idea
+#tls_no_sanity_certificate = 1
+
+# Flag to disable verification of client certificates
+#
+# Client certificate verification is the primary authentication mechanism.
+# Any client which does not present a certificate signed by the CA
+# will be rejected.
+#
+# Default is to always verify. Uncommenting this will disable
+# verification - make sure an IP whitelist is set
+#tls_no_verify_certificate = 1
+
+
+# A whitelist of allowed x509 Distinguished Names
+# This list may contain wildcards such as
+#
+# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no DN's are checked
+#tls_allowed_dn_list = ["DN1", "DN2"]
+
+
+# A whitelist of allowed SASL usernames. The format for usernames
+# depends on the SASL authentication mechanism. Kerberos usernames
+# look like username@REALM
+#
+# This list may contain wildcards such as
+#
+# "*@EXAMPLE.COM"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no Username's are checked
+#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
+
+
+
+#################################################################
+#
+# Processing controls
+#
+
+# The maximum number of concurrent client connections to allow
+# over all sockets combined.
+#max_clients = 5000
+
+# The maximum length of queue of connections waiting to be
+# accepted by the daemon. Note, that some protocols supporting
+# retransmission may obey this so that a later reattempt at
+# connection succeeds.
+#max_queued_clients = 1000
+
+# The maximum length of queue of accepted but not yet
+# authenticated clients. The default value is zero, meaning
+# the feature is disabled.
+#max_anonymous_clients = 20
+
+# The minimum limit sets the number of workers to start up
+# initially. If the number of active clients exceeds this,
+# then more threads are spawned, up to max_workers limit.
+# Typically you'd want max_workers to equal maximum number
+# of clients allowed
+#min_workers = 5
+#max_workers = 20
+
+
+# The number of priority workers. If all workers from above
+# pool are stuck, some calls marked as high priority
+# (notably domainDestroy) can be executed in this pool.
+#prio_workers = 5
+
+# Total global limit on concurrent RPC calls. Should be
+# at least as large as max_workers. Beyond this, RPC requests
+# will be read into memory and queued. This directly impacts
+# memory usage, currently each request requires 256 KB of
+# memory. So by default up to 5 MB of memory is used
+#
+# XXX this isn't actually enforced yet, only the per-client
+# limit is used so far
+#max_requests = 20
+
+# Limit on concurrent requests from a single client
+# connection. To avoid one client monopolizing the server
+# this should be a small fraction of the global max_requests
+# and max_workers parameter
+#max_client_requests = 5
+
+#################################################################
+#
+# Logging controls
+#
+
+# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
+# basically 1 will log everything possible
+# Note: Journald may employ rate limiting of the messages logged
+# and thus lock up the libvirt daemon. To use the debug level with
+# journald you have to specify it explicitly in 'log_outputs', otherwise
+# only information level messages will be logged.
+log_level = 2
+
+# Logging filters:
+# A filter allows to select a different logging level for a given category
+# of logs
+# The format for a filter is one of:
+# x:name
+# x:+name
+# where name is a string which is matched against source file name,
+# e.g., "remote", "qemu", or "util/json", the optional "+" prefix
+# tells libvirt to log stack trace for each message matching name,
+# and x is the minimal level where matching messages should be logged:
+# 1: DEBUG
+# 2: INFO
+# 3: WARNING
+# 4: ERROR
+#
+# Multiple filters can be defined in a single @filters, they just need to be
+# separated by spaces.
+#
+# e.g. to only get warning or errors from the remote layer and only errors
+# from the event layer:
+#log_filters="3:remote 4:event"
+
+# Logging outputs:
+# An output is one of the places to save logging information
+# The format for an output can be:
+# x:stderr
+# output goes to stderr
+# x:syslog:name
+# use syslog for the output and use the given name as the ident
+# x:file:file_path
+# output to a file, with the given filepath
+# x:journald
+# output to journald logging system
+# In all case the x prefix is the minimal level, acting as a filter
+# 1: DEBUG
+# 2: INFO
+# 3: WARNING
+# 4: ERROR
+#
+# Multiple outputs can be defined, they just need to be separated by spaces.
+# e.g. to log all warnings and errors to syslog under the libvirtd ident:
+#log_outputs="3:syslog:libvirtd"
+log_outputs="2:syslog:libvirtd"
+#
+
+# Log debug buffer size:
+#
+# This configuration option is no longer used, since the global
+# log buffer functionality has been removed. Please configure
+# suitable log_outputs/log_filters settings to obtain logs.
+#log_buffer_size = 64
+
+
+##################################################################
+#
+# Auditing
+#
+# This setting allows usage of the auditing subsystem to be altered:
+#
+# audit_level == 0 -> disable all auditing
+# audit_level == 1 -> enable auditing, only if enabled on host (default)
+# audit_level == 2 -> enable auditing, and exit if disabled on host
+#
+#audit_level = 2
+#
+# If set to 1, then audit messages will also be sent
+# via libvirt logging infrastructure. Defaults to 0
+#
+#audit_logging = 1
+
+###################################################################
+# UUID of the host:
+# Provide the UUID of the host here in case the command
+# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
+# 'dmidecode' does not provide a valid UUID and none is provided here, a
+# temporary UUID will be generated.
+# Keep the format of the example UUID below. UUID must not have all digits
+# be the same.
+
+# NB This default all-zeros UUID will not work. Replace
+# it with the output of the 'uuidgen' command and then
+# uncomment this entry
+#host_uuid = "00000000-0000-0000-0000-000000000000"
+host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01"
+
+###################################################################
+# Keepalive protocol:
+# This allows libvirtd to detect broken client connections or even
+# dead clients. A keepalive message is sent to a client after
+# keepalive_interval seconds of inactivity to check if the client is
+# still responding; keepalive_count is a maximum number of keepalive
+# messages that are allowed to be sent to the client without getting
+# any response before the connection is considered broken. In other
+# words, the connection is automatically closed approximately after
+# keepalive_interval * (keepalive_count + 1) seconds since the last
+# message received from the client. If keepalive_interval is set to
+# -1, libvirtd will never send keepalive requests; however clients
+# can still send them and the daemon will send responses. When
+# keepalive_count is set to 0, connections will be automatically
+# closed after keepalive_interval seconds of inactivity without
+# sending any keepalive messages.
+#
+#keepalive_interval = 5
+#keepalive_count = 5
+#
+# If set to 1, libvirtd will refuse to talk to clients that do not
+# support keepalive protocol. Defaults to 0.
+#
+#keepalive_required = 1
# UNIX socket access controls
#
-# Beware that if you are changing *any* of these options, and you use
-# socket activation with systemd, you need to adjust the settings in
-# the libvirtd.socket file as well since it could impose a security
-# risk if you rely on file permission checking only.
-
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.2/html
+html_directory = /usr/share/doc/postfix-3.0.3-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.2/readme
+readme_directory = /usr/share/doc/postfix-3.0.3-r1/readme
+
# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.1-r1/html
+html_directory = /usr/share/doc/postfix-3.0.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
+readme_directory = /usr/share/doc/postfix-3.0.2/readme
# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
+# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
+# COMPATIBILITY
+#
+# The compatibility_level determines what default settings Postfix
+# will use for main.cf and master.cf settings. These defaults will
+# change over time.
+#
+# To avoid breaking things, Postfix will use backwards-compatible
+# default settings and log where it uses those old backwards-compatible
+# default settings, until the system administrator has determined
+# if any backwards-compatible default settings need to be made
+# permanent in main.cf or master.cf.
+#
+# When this review is complete, update the compatibility_level setting
+# below as recommended in the RELEASE_NOTES file.
+#
+# The level below is what should be used with new (not upgrade) installs.
+#
+#compatibility_level = 2
+
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.11.3/html
+html_directory = /usr/share/doc/postfix-3.0.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.11.3/readme
+readme_directory = /usr/share/doc/postfix-3.0.0/readme
+meta_directory = /etc/postfix
+shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
+# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.3/html
+html_directory = /usr/share/doc/postfix-2.11.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.3/readme
+readme_directory = /usr/share/doc/postfix-2.11.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.2/html
+html_directory = /usr/share/doc/postfix-2.10.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.2/readme
+readme_directory = /usr/share/doc/postfix-2.10.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.1/html
+html_directory = /usr/share/doc/postfix-2.10.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.1/readme
+readme_directory = /usr/share/doc/postfix-2.10.2/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.5/html
+html_directory = /usr/share/doc/postfix-2.10.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.5/readme
+readme_directory = /usr/share/doc/postfix-2.10.0/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
-smtpd_sasl2_auth_enable = yes
+#smtpd_sasl2_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_local_domain = $myhostname
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
+# The default is $myhostname + localhost.$mydomain + localhost. On
+# a mail domain gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.3-r1/html
+html_directory = /usr/share/doc/postfix-3.1.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.3-r1/readme
+readme_directory = /usr/share/doc/postfix-3.1.0/readme
inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
Allow @LOCAL
</Location>
+# Restrict access to log files...
+<Location /admin/log>
+ AuthType Default
+ Require user @SYSTEM
+ Order allow,deny
+</Location>
+
# Set the default printer/job policies...
<Policy default>
# Job/subscription privacy...
-# Printer configuration file for CUPS v2.0.3
-# Written by cupsd on 2016-05-29 11:38
+# Printer configuration file for CUPS v2.1.3
+# Written by cupsd on 2016-06-16 20:50
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer Bla_blub>
UUID urn:uuid:37ccb9f9-f39f-3442-414c-7de19e42748d
Info blubber blub
Location hier
+MakeModel Kyocera FS-1020D - CUPS+Gutenprint v5.2.9
DeviceURI lpd://10.12.11.32/lp
State Idle
StateTime 1388061630
+ConfigTime 1466102983
Type 8392724
Accepting Yes
Shared No
UUID urn:uuid:539ead49-b7d1-3af8-69d7-7f753e43178a
Info Kyocera FS-1020D
Location Arbeitszimmer
+MakeModel Kyocera FS-1020D - CUPS+Gutenprint v5.2.9
DeviceURI usb://Kyocera/FS-1020D?serial=XAX5991704
State Idle
StateTime 1388067872
+ConfigTime 1466102983
Type 8392724
Accepting Yes
Shared Yes
DeviceURI cups-pdf:/
State Idle
StateTime 1264666962
+ConfigTime 1466102983
Type 8388612
Accepting Yes
Shared Yes
-# Subscription configuration file for CUPS v2.0.3
-# Written by cupsd on 2016-06-16 11:20
+# Subscription configuration file for CUPS v2.1.3
+# Written by cupsd on 2016-06-16 20:50
NextSubscriptionId 280
<Subscription 279>
Events all
LeaseDuration 86400
Interval 0
ExpirationTime 1466155203
-NextEventId 1
+NextEventId 3
</Subscription>
# Modified by: Martin Schlemmer, <azarah@gentoo.org>
# Modified by: Mike Frysinger, <vapier@gentoo.org>
# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
+# Modified by: William Hubbs, <williamh@gentoo.org>
#
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.2 2013/04/20 03:51:26 vapier Exp $
+# $Id$
# Default runlevel.
id:3:initdefault:
# System initialization, mount local filesystems, etc.
-si::sysinit:/sbin/rc sysinit
+si::sysinit:/sbin/openrc sysinit
# Further system initialization, brings up the boot runlevel.
-rc::bootwait:/sbin/rc boot
-
-l0:0:wait:/sbin/rc shutdown
-l0s:0:wait:/sbin/halt -dhp
-l1:1:wait:/sbin/rc single
-l2:2:wait:/sbin/rc nonetwork
-l3:3:wait:/sbin/rc default
-l4:4:wait:/sbin/rc default
-l5:5:wait:/sbin/rc default
-l6:6:wait:/sbin/rc reboot
-l6r:6:wait:/sbin/reboot -dk
+rc::bootwait:/sbin/openrc boot
+
+l0:0:wait:/sbin/openrc shutdown
+l0s:0:wait:/sbin/halt -dhnp
+l1:1:wait:/sbin/openrc single
+l2:2:wait:/sbin/openrc nonetwork
+l3:3:wait:/sbin/openrc default
+l4:4:wait:/sbin/openrc default
+l5:5:wait:/sbin/openrc default
+l6:6:wait:/sbin/openrc reboot
+l6r:6:wait:/sbin/reboot -dkn
#z6:6:respawn:/sbin/sulogin
# new-style single-user
-su0:S:wait:/sbin/rc single
+su0:S:wait:/sbin/openrc single
su1:S:wait:/sbin/sulogin
# TERMINALS
+#x1:12345:respawn:/sbin/agetty 38400 console linux
c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux
c2:2345:respawn:/sbin/agetty 38400 tty2 linux
c3:2345:respawn:/sbin/agetty 38400 tty3 linux
# UNIX socket access controls
#
-# Beware that if you are changing *any* of these options, and you use
-# socket activation with systemd, you need to adjust the settings in
-# the libvirtd.socket file as well since it could impose a security
-# risk if you rely on file permission checking only.
-
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
+# The default is $myhostname + localhost.$mydomain + localhost. On
+# a mail domain gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.3-r1/html
+html_directory = /usr/share/doc/postfix-3.1.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.3-r1/readme
-
+readme_directory = /usr/share/doc/postfix-3.1.0/readme
# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
projects / config / bruni / etc.git / commitdiff