maybe chmod 0644 './bash/bash_logout'
maybe chmod 0644 './bash/bashrc'
maybe chmod 0755 './bash_completion.d'
+maybe chmod 0755 './bluetooth'
+maybe chmod 0644 './bluetooth/audio.conf'
+maybe chmod 0644 './bluetooth/input.conf'
+maybe chmod 0644 './bluetooth/main.conf'
+maybe chmod 0644 './bluetooth/network.conf'
+maybe chmod 0644 './bluetooth/rfcomm.conf'
+maybe chmod 0644 './bluetooth/serial.conf'
maybe chmod 0755 './bonobo-activation'
maybe chmod 0644 './bonobo-activation/bonobo-activation-config.xml'
maybe chmod 0755 './ca-certificates'
maybe chmod 0644 './colordiffrc-lightbg'
maybe chmod 0755 './conf.d'
maybe chmod 0644 './conf.d/._cfg0000_ntpd'
+maybe chmod 0644 './conf.d/bluetooth'
maybe chmod 0644 './conf.d/bootmisc'
maybe chmod 0644 './conf.d/consolefont'
maybe chmod 0644 './conf.d/crypto-loop'
maybe chmod 0755 './dbus-1/system.d'
maybe chmod 0644 './dbus-1/system.d/.keep_sys-apps_dbus-0'
maybe chmod 0644 './dbus-1/system.d/ConsoleKit.conf'
+maybe chmod 0644 './dbus-1/system.d/bluetooth.conf'
maybe chmod 0444 './dbus-1/system.d/cups.conf'
maybe chmod 0644 './dbus-1/system.d/org.freedesktop.PolicyKit1.conf'
maybe chmod 0644 './dbus-1/system.d/org.gnome.GConf.Defaults.conf'
maybe chmod 0644 './hosts'
maybe chmod 0755 './init.d'
maybe chmod 0755 './init.d/aiccu'
+maybe chmod 0755 './init.d/bluetooth'
maybe chmod 0755 './init.d/bootmisc'
maybe chmod 0755 './init.d/consolefont'
maybe chmod 0755 './init.d/consolekit'
--- /dev/null
+# Configuration file for the audio service
+
+# This section contains options which are not specific to any
+# particular interface
+[General]
+
+# Switch to master role for incoming connections (defaults to true)
+#Master=true
+
+# If we want to disable support for specific services
+# Defaults to supporting all implemented services
+#Disable=Control,Source
+
+# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
+# Defaults to HCI
+#SCORouting=PCM
+
+# Automatically connect both A2DP and HFP/HSP profiles for incoming
+# connections. Some headsets that support both profiles will only connect the
+# other one automatically so the default setting of true is usually a good
+# idea.
+#AutoConnect=true
+
+# Headset interface specific options (i.e. options which affect how the audio
+# service interacts with remote headset devices)
+[Headset]
+
+# Set to true to support HFP, false means only HSP is supported
+# Defaults to true
+HFP=true
+
+# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
+MaxConnected=1
+
+# Set to true to enable use of fast connectable mode (faster page scanning)
+# for HFP when incomming call starts. Default settings are restored after
+# call is answered or rejected. Page scan interval is much shorter and page
+# scan type changed to interlaced. Such allows faster connection initiated
+# by a headset.
+FastConnectable=false
+
+# Just an example of potential config options for the other interfaces
+#[A2DP]
+#SBCSources=1
+#MPEG12Sources=0
--- /dev/null
+# Configuration file for the input service
+
+# This section contains options which are not specific to any
+# particular interface
+[General]
+
+# Set idle timeout (in minutes) before the connection will
+# be disconnect (defaults to 0 for no timeout)
+#IdleTimeout=30
--- /dev/null
+[General]
+
+# List of plugins that should not be loaded on bluetoothd startup
+#DisablePlugins = network,input
+
+# Default adaper name
+# %h - substituted for hostname
+# %d - substituted for adapter id
+Name = %h-%d
+
+# Default device class. Only the major and minor device class bits are
+# considered.
+Class = 0x000100
+
+# How long to stay in discoverable mode before going back to non-discoverable
+# The value is in seconds. Default is 180, i.e. 3 minutes.
+# 0 = disable timer, i.e. stay discoverable forever
+DiscoverableTimeout = 0
+
+# How long to stay in pairable mode before going back to non-discoverable
+# The value is in seconds. Default is 0.
+# 0 = disable timer, i.e. stay pairable forever
+PairableTimeout = 0
+
+# Use some other page timeout than the controller default one
+# which is 16384 (10 seconds).
+PageTimeout = 8192
+
+# Discover scheduler interval used in Adapter.DiscoverDevices
+# The value is in seconds. Defaults is 30.
+DiscoverSchedulerInterval = 30
+
+# What value should be assumed for the adapter Powered property when
+# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
+InitiallyPowered = true
+
+# Remember the previously stored Powered state when initializing adapters
+RememberPowered = true
+
+# Use vendor, product and version information for DID profile support.
+# The values are separated by ":" and VID, PID and version.
+#DeviceID = 1234:5678:abcd
+
+# Do reverse service discovery for previously unknown devices that connect to
+# us. This option is really only needed for qualification since the BITE tester
+# doesn't like us doing reverse SDP for some test cases (though there could in
+# theory be other useful purposes for this too). Defaults to true.
+ReverseServiceDiscovery = true
+
+# Enable name resolving after inquiry. Set it to 'false' if you don't need
+# remote devices name and want shorter discovery cycle. Defaults to 'true'.
+NameResolving = true
+
+# Enable runtime persistency of debug link keys. Default is false which
+# makes debug link keys valid only for the duration of the connection
+# that they were created for.
+DebugKeys = false
+
+# Enable Low Energy support if the dongle supports. Default is false.
+# Enable/Disable interleave discovery and attribute server over LE.
+EnableLE = false
+
+# Enable the GATT Attribute Server. Default is false, because it is only
+# useful for testing. Attribute server is not enabled over LE if EnableLE
+# is false.
+AttributeServer = false
--- /dev/null
+# Configuration file for the network service
+
+[General]
+
+# Disable link encryption: default=false
+#DisableSecurity=true
--- /dev/null
+#
+# RFCOMM configuration file.
+#
+
+#rfcomm0 {
+# # Automatically bind the device at startup
+# bind no;
+#
+# # Bluetooth address of the device
+# device 11:22:33:44:55:66;
+#
+# # RFCOMM channel for the connection
+# channel 1;
+#
+# # Description of the connection
+# comment "Example Bluetooth device";
+#}
--- /dev/null
+# Configuration file for serial
+
+# There could be multiple proxy sections, the format is [Proxy <user chosen name>]
+#[Proxy DUN]
+
+# UUID for DUN proxy service
+#UUID=00001103-0000-1000-8000-00805F9B34FB
+
+# Address for device node
+#Address=/dev/ttyx
--- /dev/null
+# Bluetooth configuraton file
+
+# Bind rfcomm devices (allowed values are "true" and "false")
+RFCOMM_ENABLE=true
+
+# Config file for rfcomm
+RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
--- /dev/null
+<!-- This configuration file specifies the required security policies
+ for Bluetooth core daemon to work. -->
+
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+
+ <!-- ../system.conf have denied everything, so we just punch some holes -->
+
+ <policy user="root">
+ <allow own="org.bluez"/>
+ <allow send_destination="org.bluez"/>
+ <allow send_interface="org.bluez.Agent"/>
+ <allow send_interface="org.bluez.HandsfreeAgent"/>
+ <allow send_interface="org.bluez.MediaEndpoint"/>
+ <allow send_interface="org.bluez.Watcher"/>
+ </policy>
+
+ <policy at_console="true">
+ <allow send_destination="org.bluez"/>
+ </policy>
+
+ <!-- allow users of lp group (printing subsystem) to
+ communicate with bluetoothd -->
+ <policy group="lp">
+ <allow send_destination="org.bluez"/>
+ </policy>
+
+ <policy context="default">
+ <deny send_destination="org.bluez"/>
+ </policy>
+
+</busconfig>
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/bluetooth-init.d,v 1.2 2011/03/20 16:57:35 pacho Exp $
+
+depend() {
+ after coldplug
+ need dbus localmount hostname
+}
+
+start() {
+ ebegin "Starting Bluetooth"
+
+ udevadm trigger --subsystem-match=bluetooth --action=add
+ eend $?
+
+ if [ "${RFCOMM_ENABLE}" = "true" -a -x /usr/bin/rfcomm ]; then
+ if [ -f "${RFCOMM_CONFIG}" ]; then
+ eindent
+ ebegin "Starting rfcomm"
+ /usr/bin/rfcomm -f "${RFCOMM_CONFIG}" bind all
+ eoutdent
+ eend $?
+ else
+ ewarn "Not enabling rfcomm because RFCOMM_CONFIG does not exists"
+ fi
+ fi
+}
+
+stop() {
+ ebegin "Shutting down Bluetooth"
+ eend 0
+}
projects / config / bruni / etc.git / commitdiff