maybe chmod 0644 'conf.d/urandom'
maybe chmod 0700 'config-archive'
maybe chmod 0755 'config-archive/etc'
+maybe chmod 0755 'config-archive/etc/apache2'
+maybe chmod 0755 'config-archive/etc/apache2/modules.d'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_default_settings.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_languages.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_languages.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_autoindex.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_log_config.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_log_config.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_mime.conf'
+maybe chmod 0644 'config-archive/etc/apache2/modules.d/00_mod_mime.conf.dist.new'
+maybe chmod 0755 'config-archive/etc/apache2/vhosts.d'
+maybe chmod 0644 'config-archive/etc/apache2/vhosts.d/00_default_vhost.conf'
+maybe chmod 0644 'config-archive/etc/apache2/vhosts.d/00_default_vhost.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/apache2/vhosts.d/default_vhost.include'
+maybe chmod 0644 'config-archive/etc/apache2/vhosts.d/default_vhost.include.dist.new'
+maybe chmod 0755 'config-archive/etc/conf.d'
+maybe chmod 0644 'config-archive/etc/conf.d/apache2'
+maybe chmod 0644 'config-archive/etc/conf.d/apache2.dist.new'
maybe chmod 0644 'config-archive/etc/genkernel.conf'
-maybe chmod 0644 'config-archive/etc/genkernel.conf.dist.new'
+maybe chmod 0644 'config-archive/etc/genkernel.conf.dist'
+maybe chmod 0644 'config-archive/etc/hosts'
+maybe chmod 0644 'config-archive/etc/hosts.dist'
maybe chmod 0755 'config-archive/etc/layman'
maybe chmod 0644 'config-archive/etc/layman/layman.cfg'
maybe chmod 0644 'config-archive/etc/layman/layman.cfg.dist.new'
maybe chmod 0644 'config-archive/etc/locale.gen'
maybe chmod 0644 'config-archive/etc/locale.gen.dist.new'
maybe chmod 0755 'config-archive/etc/logrotate.d'
+maybe chmod 0644 'config-archive/etc/logrotate.d/apache2'
+maybe chmod 0644 'config-archive/etc/logrotate.d/apache2.dist.new'
maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog'
maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog.dist.new'
maybe chmod 0644 'config-archive/etc/rsyslog.conf'
--- /dev/null
+# This configuration file reflects default settings for Apache HTTP Server.
+# You may change these, but chances are that you may not need to.
+
+# Timeout: The number of seconds before receives and sends time out.
+Timeout 300
+
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+KeepAlive On
+
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+MaxKeepAliveRequests 100
+
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+KeepAliveTimeout 15
+
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client. When set "On", Apache will use the value of the
+# ServerName directive.
+UseCanonicalName Off
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+AccessFileName .htaccess
+
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+ServerTokens Prod
+
+# TraceEnable
+# This directive overrides the behavior of TRACE for both the core server and
+# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
+# which disallows any request body to accompany the request. TraceEnable off
+# causes the core server and mod_proxy to return a 405 (Method not allowed)
+# error to the client.
+# For security reasons this is turned off by default. (bug #240680)
+TraceEnable off
+
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+ServerSignature On
+
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+HostnameLookups Off
+
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+EnableMMAP On
+EnableSendfile On
+
+# FileETag: Configures the file attributes that are used to create
+# the ETag (entity tag) response header field when the document is
+# based on a static file. (The ETag value is used in cache management
+# to save network bandwidth.)
+FileETag INode MTime Size
+
+# ContentDigest: This directive enables the generation of Content-MD5
+# headers as defined in RFC1864 respectively RFC2616.
+# The Content-MD5 header provides an end-to-end message integrity
+# check (MIC) of the entity-body. A proxy or client may check this
+# header for detecting accidental modification of the entity-body
+# in transit.
+# Note that this can cause performance problems on your server since
+# the message digest is computed on every request (the values are
+# not cached).
+# Content-MD5 is only sent for documents served by the core, and not
+# by any module. For example, SSI documents, output from CGI scripts,
+# and byte range responses do not have this header.
+ContentDigest Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+ErrorLog /var/log/apache2/error.log
+
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+LogLevel warn
+
+# We configure the "default" to be a very restrictive set of features.
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Require all denied
+</Directory>
+
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents. The MultiViews Options can be used for the
+# same purpose, but it is much slower.
+#
+# Do not change this entry unless you know what you are doing.
+<IfModule dir_module>
+ DirectoryIndex index.html index.html.var index.shtml index.htm
+</IfModule>
+
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+<FilesMatch "^\.ht">
+ Require all denied
+</FilesMatch>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# This configuration file reflects default settings for Apache HTTP Server.
+# You may change these, but chances are that you may not need to.
+
+# Timeout: The number of seconds before receives and sends time out.
+Timeout 300
+
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+KeepAlive On
+
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+MaxKeepAliveRequests 100
+
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+KeepAliveTimeout 15
+
+# UseCanonicalName: Determines how Apache constructs self-referencing
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client. When set "On", Apache will use the value of the
+# ServerName directive.
+UseCanonicalName Off
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+AccessFileName .htaccess
+
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of: Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+ServerTokens Prod
+
+# TraceEnable
+# This directive overrides the behavior of TRACE for both the core server and
+# mod_proxy. The default TraceEnable on permits TRACE requests per RFC 2616,
+# which disallows any request body to accompany the request. TraceEnable off
+# causes the core server and mod_proxy to return a 405 (Method not allowed)
+# error to the client.
+# For security reasons this is turned off by default. (bug #240680)
+TraceEnable off
+
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+ServerSignature On
+
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+HostnameLookups Off
+
+# EnableMMAP and EnableSendfile: On systems that support it,
+# memory-mapping or the sendfile syscall is used to deliver
+# files. This usually improves server performance, but must
+# be turned off when serving from networked-mounted
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+EnableMMAP On
+EnableSendfile Off
+
+# FileETag: Configures the file attributes that are used to create
+# the ETag (entity tag) response header field when the document is
+# based on a static file. (The ETag value is used in cache management
+# to save network bandwidth.)
+FileETag MTime Size
+
+# ContentDigest: This directive enables the generation of Content-MD5
+# headers as defined in RFC1864 respectively RFC2616.
+# The Content-MD5 header provides an end-to-end message integrity
+# check (MIC) of the entity-body. A proxy or client may check this
+# header for detecting accidental modification of the entity-body
+# in transit.
+# Note that this can cause performance problems on your server since
+# the message digest is computed on every request (the values are
+# not cached).
+# Content-MD5 is only sent for documents served by the core, and not
+# by any module. For example, SSI documents, output from CGI scripts,
+# and byte range responses do not have this header.
+ContentDigest Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+ErrorLog /var/log/apache2/error_log
+
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+LogLevel warn
+
+# We configure the "default" to be a very restrictive set of features.
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+ Require all denied
+</Directory>
+
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents. The MultiViews Options can be used for the
+# same purpose, but it is much slower.
+#
+# Do not change this entry unless you know what you are doing.
+<IfModule dir_module>
+ DirectoryIndex index.html index.html.var
+</IfModule>
+
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+<FilesMatch "^\.ht">
+ Require all denied
+</FilesMatch>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# Settings for hosting different languages.
+<IfDefine LANGUAGE>
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# It is generally better to not mark a page as
+# being a certain language than marking it with the wrong
+# language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+LanguagePriority de en ca cs da el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+ForceLanguagePriority Prefer Fallback
+
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See http://www.iana.org/assignments/character-sets for the
+# official list of charset names and their respective RFCs.
+AddCharset us-ascii.ascii .us-ascii
+AddCharset ISO-8859-1 .iso8859-1 .latin1
+AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3 .iso8859-3 .latin3
+AddCharset ISO-8859-4 .iso8859-4 .latin4
+AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
+AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
+AddCharset ISO-8859-7 .iso8859-7 .grk .greek
+AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
+AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
+AddCharset ISO-8859-10 .iso8859-10 .latin6
+AddCharset ISO-8859-13 .iso8859-13
+AddCharset ISO-8859-14 .iso8859-14 .latin8
+AddCharset ISO-8859-15 .iso8859-15 .latin9
+AddCharset ISO-8859-16 .iso8859-16 .latin10
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5.Big5 .big5 .b5
+AddCharset cn-Big5 .cn-big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251 .win-1251
+AddCharset CP866 .cp866
+AddCharset KOI8 .koi8
+AddCharset KOI8-E .koi8-e
+AddCharset KOI8-r .koi8-r .koi8-ru
+AddCharset KOI8-U .koi8-u
+AddCharset KOI8-ru .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-7 .utf7
+AddCharset UTF-8 .utf8
+AddCharset UTF-16 .utf16
+AddCharset UTF-16BE .utf16be
+AddCharset UTF-16LE .utf16le
+AddCharset UTF-32 .utf32
+AddCharset UTF-32BE .utf32be
+AddCharset UTF-32LE .utf32le
+AddCharset euc-cn .euc-cn
+AddCharset euc-gb .euc-gb
+AddCharset euc-jp .euc-jp
+AddCharset euc-kr .euc-kr
+# Not sure how euc-tw got in - IANA doesn't list it???
+AddCharset EUC-TW .euc-tw
+AddCharset gb2312 .gb2312 .gb
+AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
+AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
+AddCharset shift_jis .shift_jis .sjis
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# Settings for hosting different languages.
+<IfDefine LANGUAGE>
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# It is generally better to not mark a page as
+# being a certain language than marking it with the wrong
+# language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+ForceLanguagePriority Prefer Fallback
+
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See http://www.iana.org/assignments/character-sets for the
+# official list of charset names and their respective RFCs.
+AddCharset us-ascii.ascii .us-ascii
+AddCharset ISO-8859-1 .iso8859-1 .latin1
+AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3 .iso8859-3 .latin3
+AddCharset ISO-8859-4 .iso8859-4 .latin4
+AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
+AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
+AddCharset ISO-8859-7 .iso8859-7 .grk .greek
+AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
+AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
+AddCharset ISO-8859-10 .iso8859-10 .latin6
+AddCharset ISO-8859-13 .iso8859-13
+AddCharset ISO-8859-14 .iso8859-14 .latin8
+AddCharset ISO-8859-15 .iso8859-15 .latin9
+AddCharset ISO-8859-16 .iso8859-16 .latin10
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5.Big5 .big5 .b5
+AddCharset cn-Big5 .cn-big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251 .win-1251
+AddCharset CP866 .cp866
+AddCharset KOI8 .koi8
+AddCharset KOI8-E .koi8-e
+AddCharset KOI8-r .koi8-r .koi8-ru
+AddCharset KOI8-U .koi8-u
+AddCharset KOI8-ru .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-7 .utf7
+AddCharset UTF-8 .utf8
+AddCharset UTF-16 .utf16
+AddCharset UTF-16BE .utf16be
+AddCharset UTF-16LE .utf16le
+AddCharset UTF-32 .utf32
+AddCharset UTF-32BE .utf32be
+AddCharset UTF-32LE .utf32le
+AddCharset euc-cn .euc-cn
+AddCharset euc-gb .euc-gb
+AddCharset euc-jp .euc-jp
+AddCharset euc-kr .euc-kr
+# Not sure how euc-tw got in - IANA doesn't list it???
+AddCharset EUC-TW .euc-tw
+AddCharset gb2312 .gb2312 .gb
+AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
+AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
+AddCharset shift_jis .shift_jis .sjis
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule autoindex_module>
+<IfDefine !NO_AUTOINDEX_CONF>
+
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Require all granted
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+IndexOptions FancyIndexing VersionSort FoldersFirst HTMLTable IgnoreCase NameWidth=50
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+AddDescription "GZIP compressed document" .gz
+AddDescription "tar archive" .tar
+AddDescription "GZIP compressed tar archive" .tgz
+AddDescription "GZIP-komprimiertes Tar-Archiv" .tgz
+AddDescription "PDF-Dokument" .pdf
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfDefine>
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule autoindex_module>
+<IfDefine !NO_AUTOINDEX_CONF>
+
+<IfModule alias_module>
+# We include the /icons/ alias for FancyIndexed directory listings. If
+# you do not use FancyIndexing, you may comment this out.
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Require all granted
+</Directory>
+</IfModule>
+
+# Directives controlling the display of server-generated directory listings.
+#
+# To see the listing of a directory, the Options directive for the
+# directory must include "Indexes", and the directory must not contain
+# a file matching those listed in the DirectoryIndex directive.
+
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+IndexOptions FancyIndexing VersionSort
+
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+DefaultIcon /icons/unknown.gif
+
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfDefine>
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule log_config_module>
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%T\" \"%v\" \"%f\"" full
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-Agent}i" agent
+LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
+
+<IfModule logio_module>
+# You need to enable mod_logio.c to use %I and %O
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%T\" \"%v\" \"%f\" %I %O" full_io
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" vhostio
+</IfModule>
+
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here. Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+CustomLog /var/log/apache2/access.log full
+
+# If you would like to have agent and referer logfiles,
+# uncomment the following directives.
+#CustomLog /var/log/apache2/referer_log referer
+#CustomLog /var/log/apache2/agent_logs agent
+
+# If you prefer a logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#CustomLog /var/log/apache2/access_log combined
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule log_config_module>
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-Agent}i" agent
+LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
+
+<IfModule logio_module>
+# You need to enable mod_logio.c to use %I and %O
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" vhostio
+</IfModule>
+
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here. Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+CustomLog /var/log/apache2/access_log common
+
+# If you would like to have agent and referer logfiles,
+# uncomment the following directives.
+#CustomLog /var/log/apache2/referer_log referer
+#CustomLog /var/log/apache2/agent_logs agent
+
+# If you prefer a logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#CustomLog /var/log/apache2/access_log combined
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule mime_module>
+# TypesConfig points to the file containing the list of mappings from
+# filename extension to MIME-type.
+TypesConfig /etc/mime.types
+
+# AddType allows you to add to or override the MIME configuration
+# file specified in TypesConfig for specific file types.
+#AddType application/x-gzip .tgz
+
+# AddEncoding allows you to have certain browsers uncompress
+# information on the fly. Note: Not all browsers support this.
+AddEncoding x-compress .Z
+AddEncoding x-gzip .gz .tgz
+
+# If the AddEncoding directives above are commented-out, then you
+# probably should define those extensions to indicate media types:
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+
+# AddHandler allows you to map certain file extensions to "handlers":
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action directive (see below)
+
+# To use CGI scripts outside of ScriptAliased directories:
+# (You will also need to add "ExecCGI" to the "Options" directive.)
+#AddHandler cgi-script .cgi
+
+# For type maps (negotiated resources):
+AddHandler type-map var
+
+# Filters allow you to process content before it is sent to the client.
+#
+# To parse .shtml files for server-side includes (SSI):
+# (You will also need to add "Includes" to the "Options" directive.)
+#AddType text/html .shtml
+#AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+<IfModule mime_magic_module>
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+MIMEMagicFile /etc/apache2/magic
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+<IfModule mime_module>
+# TypesConfig points to the file containing the list of mappings from
+# filename extension to MIME-type.
+TypesConfig /etc/mime.types
+
+# AddType allows you to add to or override the MIME configuration
+# file specified in TypesConfig for specific file types.
+#AddType application/x-gzip .tgz
+
+# AddEncoding allows you to have certain browsers uncompress
+# information on the fly. Note: Not all browsers support this.
+#AddEncoding x-compress .Z
+#AddEncoding x-gzip .gz .tgz
+
+# If the AddEncoding directives above are commented-out, then you
+# probably should define those extensions to indicate media types:
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+
+# AddHandler allows you to map certain file extensions to "handlers":
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action directive (see below)
+
+# To use CGI scripts outside of ScriptAliased directories:
+# (You will also need to add "ExecCGI" to the "Options" directive.)
+#AddHandler cgi-script .cgi
+
+# For type maps (negotiated resources):
+#AddHandler type-map var
+
+# Filters allow you to process content before it is sent to the client.
+#
+# To parse .shtml files for server-side includes (SSI):
+# (You will also need to add "Includes" to the "Options" directive.)
+#AddType text/html .shtml
+#AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+<IfModule mime_magic_module>
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+MIMEMagicFile /etc/apache2/magic
+</IfModule>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# Virtual Hosts
+#
+# If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs/2.4/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+<IfDefine DEFAULT_VHOST>
+# see bug #178966 why this is in here
+
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+# Use name-based virtual hosting.
+NameVirtualHost *:80
+
+# When virtual hosts are enabled, the main host defined in the default
+# httpd.conf configuration will go away. We redefine it here so that it is
+# still available.
+#
+# If you disable this vhost by removing -D DEFAULT_VHOST from
+# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
+# the default.
+<VirtualHost *:80>
+ ServerName berta.pixelpark.com
+ Include /etc/apache2/vhosts.d/default_vhost.include
+
+ <IfModule mpm_peruser_module>
+ ServerEnvironment apache apache
+ </IfModule>
+</VirtualHost>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# Virtual Hosts
+#
+# If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs/2.4/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+<IfDefine DEFAULT_VHOST>
+# see bug #178966 why this is in here
+
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+# When virtual hosts are enabled, the main host defined in the default
+# httpd.conf configuration will go away. We redefine it here so that it is
+# still available.
+#
+# If you disable this vhost by removing -D DEFAULT_VHOST from
+# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
+# the default.
+<VirtualHost *:80>
+ ServerName localhost
+ Include /etc/apache2/vhosts.d/default_vhost.include
+
+ <IfModule mpm_peruser_module>
+ ServerEnvironment apache apache
+ </IfModule>
+</VirtualHost>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+ServerAdmin frank.brehm@pixelpark.com
+
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+# If you change this to something that isn't under /var/www then suexec
+# will no longer work.
+DocumentRoot "/var/www/localhost/htdocs"
+
+# This should be changed to whatever you set DocumentRoot to.
+<Directory "/var/www/localhost/htdocs">
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs/2.4/mod/core.html#options
+ # for more information.
+ Options Indexes FollowSymLinks
+
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # Options FileInfo AuthConfig Limit
+ AllowOverride All
+
+ # Controls who can get stuff from this server.
+ Require all granted
+</Directory>
+
+<IfModule alias_module>
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
+</IfModule>
+
+# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+<Directory "/var/www/localhost/cgi-bin">
+ AllowOverride None
+ Options None
+ Require all granted
+</Directory>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+ServerAdmin root@localhost
+
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+# If you change this to something that isn't under /var/www then suexec
+# will no longer work.
+DocumentRoot "/var/www/localhost/htdocs"
+
+# This should be changed to whatever you set DocumentRoot to.
+<Directory "/var/www/localhost/htdocs">
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs/2.4/mod/core.html#options
+ # for more information.
+ Options Indexes FollowSymLinks
+
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # Options FileInfo AuthConfig Limit
+ AllowOverride All
+
+ # Controls who can get stuff from this server.
+ Require all granted
+</Directory>
+
+<IfModule alias_module>
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
+</IfModule>
+
+# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+<Directory "/var/www/localhost/cgi-bin">
+ AllowOverride None
+ Options None
+ Require all granted
+</Directory>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# /etc/conf.d/apache2: config file for /etc/init.d/apache2
+
+# When you install a module it is easy to activate or deactivate the modules
+# and other features of apache using the APACHE2_OPTS line. Every module should
+# install a configuration in /etc/apache2/modules.d. In that file will have an
+# <IfDefine NNN> directive where NNN is the option to enable that module.
+#
+# Here are the options available in the default configuration:
+#
+# AUTH_DIGEST Enables mod_auth_digest
+# AUTHNZ_LDAP Enables authentication through mod_ldap (available if USE=ldap)
+# CACHE Enables mod_cache
+# DAV Enables mod_dav
+# ERRORDOCS Enables default error documents for many languages.
+# INFO Enables mod_info, a useful module for debugging
+# LANGUAGE Enables content-negotiation based on language and charset.
+# LDAP Enables mod_ldap (available if USE=ldap)
+# MANUAL Enables /manual/ to be the apache manual (available if USE=docs)
+# MEM_CACHE Enables default configuration mod_mem_cache
+# PROXY Enables mod_proxy
+# SSL Enables SSL (available if USE=ssl)
+# STATUS Enabled mod_status, a useful module for statistics
+# SUEXEC Enables running CGI scripts (in USERDIR) through suexec.
+# USERDIR Enables /~username mapping to /home/username/public_html
+#
+#
+# The following two options provide the default virtual host for the HTTP and
+# HTTPS protocol. YOU NEED TO ENABLE AT LEAST ONE OF THEM, otherwise apache
+# will not listen for incomming connections on the approriate port.
+#
+# DEFAULT_VHOST Enables name-based virtual hosts, with the default
+# virtual host being in /var/www/localhost/htdocs
+# SSL_DEFAULT_VHOST Enables default vhost for SSL (you should enable this
+# when you enable SSL)
+#
+#APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D SUEXEC -D LANGUAGE"
+#APACHE2_OPTS="-D DEFAULT_VHOST -D PHP -D SSL -D SSL_DEFAULT_VHOST -D MANUAL -D INFO -D STATUS -D ERRORDOCS -D LANGUAGE"
+APACHE2_OPTS="-D DEFAULT_VHOST -D PHP -D MANUAL -D INFO -D STATUS -D ERRORDOCS -D LANGUAGE"
+
+# Extended options for advanced uses of Apache ONLY
+# You don't need to edit these unless you are doing crazy Apache stuff
+# As not having them set correctly, or feeding in an incorrect configuration
+# via them will result in Apache failing to start
+# YOU HAVE BEEN WARNED.
+
+# PID file
+#PIDFILE=/var/run/apache2.pid
+
+# timeout for startup/shutdown checks
+#TIMEOUT=10
+
+# ServerRoot setting
+#SERVERROOT=/usr/lib64/apache2
+
+# Configuration file location
+# - If this does NOT start with a '/', then it is treated relative to
+# $SERVERROOT by Apache
+#CONFIGFILE=/etc/apache2/httpd.conf
+
+# Location to log startup errors to
+# They are normally dumped to your terminal.
+#STARTUPERRORLOG="/var/log/apache2/startuperror.log"
+
+# A command that outputs a formatted text version of the HTML at the URL
+# of the command line. Designed for lynx, however other programs may work.
+#LYNX="lynx -dump"
+
+# The URL to your server's mod_status status page.
+# Required for status and fullstatus
+#STATUSURL="http://localhost/server-status"
+
+# Method to use when reloading the server
+# Valid options are 'restart' and 'graceful'
+# See http://httpd.apache.org/docs/2.2/stopping.html for information on
+# what they do and how they differ.
+#RELOAD_TYPE="graceful"
--- /dev/null
+# /etc/conf.d/apache2: config file for /etc/init.d/apache2
+
+# When you install a module it is easy to activate or deactivate the modules
+# and other features of apache using the APACHE2_OPTS line. Every module should
+# install a configuration in /etc/apache2/modules.d. In that file will have an
+# <IfDefine NNN> directive where NNN is the option to enable that module.
+#
+# Here are the options available in the default configuration:
+#
+# AUTH_DIGEST Enables mod_auth_digest
+# AUTHNZ_LDAP Enables authentication through mod_ldap (available if USE=ldap)
+# CACHE Enables mod_cache
+# DAV Enables mod_dav
+# ERRORDOCS Enables default error documents for many languages.
+# INFO Enables mod_info, a useful module for debugging
+# LANGUAGE Enables content-negotiation based on language and charset.
+# LDAP Enables mod_ldap (available if USE=ldap)
+# MANUAL Enables /manual/ to be the apache manual (available if USE=docs)
+# MEM_CACHE Enables default configuration mod_mem_cache
+# PROXY Enables mod_proxy
+# SSL Enables SSL (available if USE=ssl)
+# STATUS Enabled mod_status, a useful module for statistics
+# SUEXEC Enables running CGI scripts (in USERDIR) through suexec.
+# USERDIR Enables /~username mapping to /home/username/public_html
+#
+#
+# The following two options provide the default virtual host for the HTTP and
+# HTTPS protocol. YOU NEED TO ENABLE AT LEAST ONE OF THEM, otherwise apache
+# will not listen for incomming connections on the approriate port.
+#
+# DEFAULT_VHOST Enables name-based virtual hosts, with the default
+# virtual host being in /var/www/localhost/htdocs
+# SSL_DEFAULT_VHOST Enables default vhost for SSL (you should enable this
+# when you enable SSL)
+#
+APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D SUEXEC -D LANGUAGE"
+
+# Extended options for advanced uses of Apache ONLY
+# You don't need to edit these unless you are doing crazy Apache stuff
+# As not having them set correctly, or feeding in an incorrect configuration
+# via them will result in Apache failing to start
+# YOU HAVE BEEN WARNED.
+
+# PID file
+#PIDFILE=/var/run/apache2.pid
+
+# timeout for startup/shutdown checks
+#TIMEOUT=10
+
+# ServerRoot setting
+#SERVERROOT=/usr/lib64/apache2
+
+# Configuration file location
+# - If this does NOT start with a '/', then it is treated relative to
+# $SERVERROOT by Apache
+#CONFIGFILE=/etc/apache2/httpd.conf
+
+# Location to log startup errors to
+# They are normally dumped to your terminal.
+#STARTUPERRORLOG="/var/log/apache2/startuperror.log"
+
+# A command that outputs a formatted text version of the HTML at the URL
+# of the command line. Designed for lynx, however other programs may work.
+#LYNX="lynx -dump"
+
+# The URL to your server's mod_status status page.
+# Required for status and fullstatus
+#STATUSURL="http://localhost/server-status"
+
+# Method to use when reloading the server
+# Valid options are 'restart' and 'graceful'
+# See http://httpd.apache.org/docs/2.2/stopping.html for information on
+# what they do and how they differ.
+#RELOAD_TYPE="graceful"
--- /dev/null
+# Configuration file for genkernel
+
+# This file is sourced by genkernel at startup and determines which options
+# we will be using to compile our kernel. The order of precidence is simple,
+# with the internal settings being least important, configuration file
+# settings next, and command line options being most important.
+
+# =========Common Command Line Option Defaults=========
+
+# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
+# catalyst and stage building.
+#INSTALL="yes"
+
+# Run 'make oldconfig' before compiling this kernel?
+OLDCONFIG="yes"
+
+# Run 'make menuconfig' before compiling this kernel?
+MENUCONFIG="no"
+
+# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel?
+NCONFIG="no"
+
+# Note, that two previous lines are mutual exclusive (logically), while
+# MENUCONFIG has a higher priority if both them is enabled.
+
+# Run 'make clean' before compilation?
+# If set to NO, implies MRPROPER WILL NOT be run
+# Also, if clean is NO, it won't copy over any configuration
+# file, it will use what's there.
+CLEAN="yes"
+
+# Run 'make mrproper' before configuration/compilation?
+MRPROPER="yes"
+
+# Override the arch detection?
+#ARCH_OVERRIDE="x86"
+
+# Mount BOOTDIR automatically if it isn't mounted?
+MOUNTBOOT="yes"
+
+# Make symlinks in BOOTDIR automatically?
+#SYMLINK="no"
+
+# Save the new configuration in /etc/kernels upon
+# successfull compilation
+SAVE_CONFIG="yes"
+
+# Use Color output in Genkernel?
+USECOLOR="yes"
+
+# Clear build cache dir
+#CLEAR_CACHE_DIR="yes"
+
+# Clear all tmp files and caches after genkernel has run
+#POSTCLEAR="1"
+
+# Genkernel uses an independent configuration for MAKEOPTS, and does not source
+# /etc/make.conf . You can override the default setting by uncommenting and
+# tweaking the following line. Default setting is set up by
+# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
+# argument is: <number of processors>*<number of cores per processor>+1
+#MAKEOPTS="-j2"
+
+# Add in LVM support from static binaries if they exist on the system, or
+# compile static LVM binaries if static ones do not exist.
+#LVM="no"
+
+# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
+#LUKS="no"
+
+# Add in GnuPG support
+#GPG="no"
+
+# Add DMRAID support.
+#DMRAID="no"
+
+# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
+# If included, busybox is rebuilt if the cached copy is out of date.
+#BUSYBOX="yes"
+
+# Use udev instead of mdev as the default device manager for the initramfs.
+# If you use systemd and perhaps lvm, you _must_ keep this turned on.
+#UDEV="yes"
+
+# Includes mdadm/mdmon binaries in initramfs.
+# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
+#MDADM="no"
+
+# Specify a custom mdadm.conf.
+# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
+# arrays during bootup. Usually, this should not be needed.
+#MDADM_CONFIG="/etc/mdadm.conf"
+
+# Add Multipath support.
+#MULTIPATH="no"
+
+# Add iSCSI support.
+#ISCSI="no"
+
+# Add e2fsprogs support.
+#E2FSPROGS="no"
+
+# Enable copying of firmware into initramfs
+#FIRMWARE="no"
+# Specify directory to pull from
+#FIRMWARE_DIR="/lib/firmware"
+# Specify specific firmware files to include. This overrides FIRMWARE_DIR
+#FIRMWARE_FILES=""
+
+# Add new kernel to grub?
+#BOOTLOADER="grub"
+
+# Enable splashutils in early space (initrd). Default is "no".
+#SPLASH="yes"
+
+# Use this splash theme. If commented out - the "default" name theme is used.
+# Also, SPLASH="yes" needs to be enabled for this one to one work.
+# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
+#SPLASH_THEME="gentoo"
+
+# Installs, or not, plymouth into the initramfs. If "splash" will be
+# passed at boot, plymouth will be activated.
+# PLYMOUTH="yes"
+
+# Embeds the given plymouth theme into the initramfs.
+# PLYMOUTH_THEME="text"
+
+# =========Keymap Settings=========
+#
+# Force keymap selection at boot
+#DOKEYMAPAUTO="yes"
+
+
+# Disables keymap selection support
+#KEYMAP="0"
+
+
+# =========Low Level Compile Settings=========
+#
+# GNU Make to use for kernel. See also the --kernel-make command line option.
+#KERNEL_MAKE="make"
+
+# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
+# command line option.
+#KERNEL_CC="gcc"
+
+# Assembler to use for the kernel. See also the --kernel-as command line
+# option.
+#KERNEL_AS="as"
+
+# Linker to use for the kernel. See also the --kernel-ld command line option.
+#KERNEL_LD="ld"
+
+# GNU Make to use for the utilities. See also the --utils-make command line
+# option.
+#UTILS_MAKE="make"
+
+# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
+# command line option.
+#UTILS_CC="gcc"
+
+# Assembler to use for the utilities. See also the --utils-as command line
+# option.
+#UTILS_AS="as"
+
+# Linker to use for the utilities. See also the --utils-ld command line
+# option.
+#UTILS_LD="ld"
+
+# =========GENKERNEL LOCATION CONFIGURATION============
+# Variables:
+# %%ARCH%% - Final determined architecture
+# %%CACHE%% - Final determined cache location
+
+# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
+#TMPDIR="/var/tmp/genkernel"
+
+# Set the boot directory, default is /boot
+#BOOTDIR="/boot"
+
+# Default share directory location
+GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
+
+# Location of the default cache
+CACHE_DIR="/var/cache/genkernel"
+# Location of DISTDIR, where our source tarballs are stored
+DISTDIR="/var/lib/genkernel/src"
+# Log output file
+LOGFILE="/var/log/genkernel.log"
+# Debug Level
+LOGLEVEL=1
+
+# =========COMPILED UTILS CONFIGURATION============
+#
+# Default location of kernel source
+DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+# Default kernel config (only use to override using
+# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
+#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
+
+# Specifies a user created busybox config
+#BUSYBOX_CONFIG="/path/to/file"
+#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
+
+# NOTE: Since genkernel 3.4.41 the version of
+# busybox, lvm, mdadm, .. have been moved to
+# /usr/share/genkernel/defaults/software.sh in order to
+# reduce the merging you have to do during etc-update.
+# You can still override these settings in here.
+
+
+# =========MISC KERNEL CONFIGURATION============
+#
+# Tag the kernel and ramdisk with a name:
+# If not defined the option defaults to
+# 'genkernel'
+#KNAME="genkernel"
+
+# Append a text to the kernel/initrd's name,
+# usefull to add a unique key like the actual date
+#KAPPENDNAME="-$(date +%Y%m%d-%H%M%S)"
+
+
+# This option is only valid if kerncache is
+# defined. If there is a valid kerncache no checks
+# will be made against a kernel source tree
+#KERNEL_SOURCES="0"
+
+
+# Build a static (monolithic kernel)
+#BUILD_STATIC="1"
+
+
+# Make and install kernelz image (PowerPC)
+#GENZIMAGE="1"
+
+
+# File to output a .tar.bz2'd kernel contents
+# of /lib/modules/ and the kernel config
+# NOTE: This is created before the callbacks
+# are run!
+#KERNCACHE="/path/to/file"
+
+
+# Prefix to kernel module destination, modules
+# will be installed in <prefix>/lib/modules
+# (.conf equivalent of --module-prefix=<dir>)
+#INSTALL_MOD_PATH=""
+
+
+# =========MISC INITRD CONFIGURATION============
+#
+# Copy all kernel modules to the ramdisk
+#ALLRAMDISKMODULES="1"
+
+
+# Don't copy any modules to the ramdisk
+#RAMDISKMODULES="0"
+
+
+# File to output a .tar.bz2'd kernel and ramdisk:
+# No modules outside of the ramdisk will be
+# included...
+#MINKERNPACKAGE="/path/to/file.bz2"
+
+
+# File to output a .tar.bz2'd modules after the
+# callbacks have run
+#MODULESPACKAGE="/path/to/file.bz2"
+
+
+# Directory structure to include in the initramfs,
+# only available on >=2.6 kernels
+#INITRAMFS_OVERLAY=""
+
+
+# Build the generated initramfs into the kernel instead of
+# keeping it as a separate file
+#INTEGRATED_INITRAMFS="1"
+
+
+# Compress generated initramfs
+#COMPRESS_INITRD="yes"
+# Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest
+# "best" selects the best available compression method
+# "fastest" selects the fastest available compression method
+#COMPRESS_INITRD_TYPE="best"
+
+
+# Create a self-contained env in the initramfs
+#NETBOOT="1"
+
+
+# =========MISC BOOT CONFIGURATION============
+#
+# Specify a default for real_root=
+#REAL_ROOT="/dev/one/two/gentoo"
+++ /dev/null
-# Configuration file for genkernel
-
-# This file is sourced by genkernel at startup and determines which options
-# we will be using to compile our kernel. The order of precidence is simple,
-# with the internal settings being least important, configuration file
-# settings next, and command line options being most important.
-
-# =========Common Command Line Option Defaults=========
-
-# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
-# catalyst and stage building.
-#INSTALL="yes"
-
-# Run 'make oldconfig' before compiling this kernel?
-OLDCONFIG="yes"
-
-# Run 'make menuconfig' before compiling this kernel?
-MENUCONFIG="no"
-
-# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel?
-NCONFIG="no"
-
-# Note, that two previous lines are mutual exclusive (logically), while
-# MENUCONFIG has a higher priority if both them is enabled.
-
-# Run 'make clean' before compilation?
-# If set to NO, implies MRPROPER WILL NOT be run
-# Also, if clean is NO, it won't copy over any configuration
-# file, it will use what's there.
-CLEAN="yes"
-
-# Run 'make mrproper' before configuration/compilation?
-MRPROPER="yes"
-
-# Override the arch detection?
-#ARCH_OVERRIDE="x86"
-
-# Mount BOOTDIR automatically if it isn't mounted?
-MOUNTBOOT="yes"
-
-# Make symlinks in BOOTDIR automatically?
-#SYMLINK="no"
-
-# Save the new configuration in /etc/kernels upon
-# successfull compilation
-SAVE_CONFIG="yes"
-
-# Use Color output in Genkernel?
-USECOLOR="yes"
-
-# Clear build cache dir
-#CLEAR_CACHE_DIR="yes"
-
-# Clear all tmp files and caches after genkernel has run
-#POSTCLEAR="1"
-
-# Genkernel uses an independent configuration for MAKEOPTS, and does not source
-# /etc/make.conf . You can override the default setting by uncommenting and
-# tweaking the following line. Default setting is set up by
-# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
-# argument is: <number of processors>*<number of cores per processor>+1
-#MAKEOPTS="-j2"
-
-# Add in LVM support from static binaries if they exist on the system, or
-# compile static LVM binaries if static ones do not exist.
-#LVM="no"
-
-# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
-#LUKS="no"
-
-# Add in GnuPG support
-#GPG="no"
-
-# Add DMRAID support.
-#DMRAID="no"
-
-# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
-# If included, busybox is rebuilt if the cached copy is out of date.
-#BUSYBOX="yes"
-
-# Use udev instead of mdev as the default device manager for the initramfs.
-# If you use systemd and perhaps lvm, you _must_ keep this turned on.
-#UDEV="yes"
-
-# Includes mdadm/mdmon binaries in initramfs.
-# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
-#MDADM="no"
-
-# Specify a custom mdadm.conf.
-# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
-# arrays during bootup. Usually, this should not be needed.
-#MDADM_CONFIG="/etc/mdadm.conf"
-
-# Add Multipath support.
-#MULTIPATH="no"
-
-# Add iSCSI support.
-#ISCSI="no"
-
-# Add e2fsprogs support.
-#E2FSPROGS="no"
-
-# Enable copying of firmware into initramfs
-#FIRMWARE="no"
-# Specify directory to pull from
-#FIRMWARE_DIR="/lib/firmware"
-# Specify specific firmware files to include. This overrides FIRMWARE_DIR
-#FIRMWARE_FILES=""
-
-# Add new kernel to grub?
-#BOOTLOADER="grub"
-
-# Enable splashutils in early space (initrd). Default is "no".
-#SPLASH="yes"
-
-# Use this splash theme. If commented out - the "default" name theme is used.
-# Also, SPLASH="yes" needs to be enabled for this one to one work.
-# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
-#SPLASH_THEME="gentoo"
-
-# Installs, or not, plymouth into the initramfs. If "splash" will be
-# passed at boot, plymouth will be activated.
-# PLYMOUTH="yes"
-
-# Embeds the given plymouth theme into the initramfs.
-# PLYMOUTH_THEME="text"
-
-# =========Keymap Settings=========
-#
-# Force keymap selection at boot
-#DOKEYMAPAUTO="yes"
-
-
-# Disables keymap selection support
-#KEYMAP="0"
-
-
-# =========Low Level Compile Settings=========
-#
-# GNU Make to use for kernel. See also the --kernel-make command line option.
-#KERNEL_MAKE="make"
-
-# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
-# command line option.
-#KERNEL_CC="gcc"
-
-# Assembler to use for the kernel. See also the --kernel-as command line
-# option.
-#KERNEL_AS="as"
-
-# Linker to use for the kernel. See also the --kernel-ld command line option.
-#KERNEL_LD="ld"
-
-# GNU Make to use for the utilities. See also the --utils-make command line
-# option.
-#UTILS_MAKE="make"
-
-# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
-# command line option.
-#UTILS_CC="gcc"
-
-# Assembler to use for the utilities. See also the --utils-as command line
-# option.
-#UTILS_AS="as"
-
-# Linker to use for the utilities. See also the --utils-ld command line
-# option.
-#UTILS_LD="ld"
-
-# =========GENKERNEL LOCATION CONFIGURATION============
-# Variables:
-# %%ARCH%% - Final determined architecture
-# %%CACHE%% - Final determined cache location
-
-# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
-#TMPDIR="/var/tmp/genkernel"
-
-# Set the boot directory, default is /boot
-#BOOTDIR="/boot"
-
-# Default share directory location
-GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
-
-# Location of the default cache
-CACHE_DIR="/var/cache/genkernel"
-# Location of DISTDIR, where our source tarballs are stored
-DISTDIR="/var/lib/genkernel/src"
-# Log output file
-LOGFILE="/var/log/genkernel.log"
-# Debug Level
-LOGLEVEL=1
-
-# =========COMPILED UTILS CONFIGURATION============
-#
-# Default location of kernel source
-DEFAULT_KERNEL_SOURCE="/usr/src/linux"
-# Default kernel config (only use to override using
-# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
-#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
-
-# Specifies a user created busybox config
-#BUSYBOX_CONFIG="/path/to/file"
-#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
-
-# NOTE: Since genkernel 3.4.41 the version of
-# busybox, lvm, mdadm, .. have been moved to
-# /usr/share/genkernel/defaults/software.sh in order to
-# reduce the merging you have to do during etc-update.
-# You can still override these settings in here.
-
-
-# =========MISC KERNEL CONFIGURATION============
-#
-# Tag the kernel and ramdisk with a name:
-# If not defined the option defaults to
-# 'genkernel'
-#KNAME="genkernel"
-
-
-# This option is only valid if kerncache is
-# defined. If there is a valid kerncache no checks
-# will be made against a kernel source tree
-#KERNEL_SOURCES="0"
-
-
-# Build a static (monolithic kernel)
-#BUILD_STATIC="1"
-
-
-# Make and install kernelz image (PowerPC)
-#GENZIMAGE="1"
-
-
-# File to output a .tar.bz2'd kernel contents
-# of /lib/modules/ and the kernel config
-# NOTE: This is created before the callbacks
-# are run!
-#KERNCACHE="/path/to/file"
-
-
-# Prefix to kernel module destination, modules
-# will be installed in <prefix>/lib/modules
-# (.conf equivalent of --module-prefix=<dir>)
-#INSTALL_MOD_PATH=""
-
-
-# =========MISC INITRD CONFIGURATION============
-#
-# Copy all kernel modules to the ramdisk
-#ALLRAMDISKMODULES="1"
-
-
-# Don't copy any modules to the ramdisk
-#RAMDISKMODULES="0"
-
-
-# File to output a .tar.bz2'd kernel and ramdisk:
-# No modules outside of the ramdisk will be
-# included...
-#MINKERNPACKAGE="/path/to/file.bz2"
-
-
-# File to output a .tar.bz2'd modules after the
-# callbacks have run
-#MODULESPACKAGE="/path/to/file.bz2"
-
-
-# Directory structure to include in the initramfs,
-# only available on >=2.6 kernels
-#INITRAMFS_OVERLAY=""
-
-
-# Build the generated initramfs into the kernel instead of
-# keeping it as a separate file
-#INTEGRATED_INITRAMFS="1"
-
-
-# Compress generated initramfs
-#COMPRESS_INITRD="yes"
-# Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest
-# "best" selects the best available compression method
-# "fastest" selects the fastest available compression method
-#COMPRESS_INITRD_TYPE="best"
-
-
-# Create a self-contained env in the initramfs
-#NETBOOT="1"
-
-
-# =========MISC BOOT CONFIGURATION============
-#
-# Specify a default for real_root=
-#REAL_ROOT="/dev/one/two/gentoo"
--- /dev/null
+# /etc/hosts: Local Host Database
+#
+# This file describes a number of aliases-to-address mappings for the for
+# local hosts that share this file.
+#
+# In the presence of the domain name service or NIS, this file may not be
+# consulted at all; see /etc/host.conf for the resolution order.
+#
+
+# IPv4 and IPv6 localhost aliases
+127.0.0.1 berta.pixelpark.com berta localhost
+::1 berta.pixelpark.com berta localhost
+
+#
+# Imaginary network.
+#10.0.0.2 myname
+#10.0.0.3 myfriend
+#
+# According to RFC 1918, you can use the following IP networks for private
+# nets which will never be connected to the Internet:
+#
+# 10.0.0.0 - 10.255.255.255
+# 172.16.0.0 - 172.31.255.255
+# 192.168.0.0 - 192.168.255.255
+#
+# In case you want to be able to connect directly to the Internet (i.e. not
+# behind a NAT, ADSL router, etc...), you need real official assigned
+# numbers. Do not try to invent your own network numbers but instead get one
+# from your network provider (if any) or from your regional registry (ARIN,
+# APNIC, LACNIC, RIPE NCC, or AfriNIC.)
+#
--- /dev/null
+# /etc/hosts: Local Host Database
+#
+# This file describes a number of aliases-to-address mappings for the for
+# local hosts that share this file.
+#
+# The format of lines in this file is:
+#
+# IP_ADDRESS canonical_hostname [aliases...]
+#
+#The fields can be separated by any number of spaces or tabs.
+#
+# In the presence of the domain name service or NIS, this file may not be
+# consulted at all; see /etc/host.conf for the resolution order.
+#
+
+# IPv4 and IPv6 localhost aliases
+127.0.0.1 localhost
+::1 localhost
+
+#
+# Imaginary network.
+#10.0.0.2 myname
+#10.0.0.3 myfriend
+#
+# According to RFC 1918, you can use the following IP networks for private
+# nets which will never be connected to the Internet:
+#
+# 10.0.0.0 - 10.255.255.255
+# 172.16.0.0 - 172.31.255.255
+# 192.168.0.0 - 192.168.255.255
+#
+# In case you want to be able to connect directly to the Internet (i.e. not
+# behind a NAT, ADSL router, etc...), you need real official assigned
+# numbers. Do not try to invent your own network numbers but instead get one
+# from your network provider (if any) or from your regional registry (ARIN,
+# APNIC, LACNIC, RIPE NCC, or AfriNIC.)
+#
--- /dev/null
+# Apache2 logrotate snipet for Gentoo Linux
+# Contributes by Chuck Short
+#
+/var/log/apache2/*log {
+ daily
+ rotate 14
+ missingok
+ notifempty
+ sharedscripts
+ size 4M
+ postrotate
+ /etc/init.d/apache2 reload > /dev/null 2>&1 || true
+ endscript
+}
--- /dev/null
+# Apache2 logrotate snipet for Gentoo Linux
+# Contributes by Chuck Short
+#
+/var/log/apache2/*log {
+ missingok
+ notifempty
+ sharedscripts
+ postrotate
+ /etc/init.d/apache2 reload > /dev/null 2>&1 || true
+ endscript
+}
# 'genkernel'
#KNAME="genkernel"
+# Append a text to the kernel/initrd's name,
+# usefull to add a unique key like the actual date
+#KAPPENDNAME="-$(date +%Y%m%d-%H%M%S)"
+
# This option is only valid if kerncache is
# defined. If there is a valid kerncache no checks
# This file describes a number of aliases-to-address mappings for the for
# local hosts that share this file.
#
+# The format of lines in this file is:
+#
+# IP_ADDRESS canonical_hostname [aliases...]
+#
+#The fields can be separated by any number of spaces or tabs.
+#
# In the presence of the domain name service or NIS, this file may not be
# consulted at all; see /etc/host.conf for the resolution order.
#
projects / config / berta / etc.git / commitdiff