-# $OpenBSD$
+# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
-# AddressFamily any
+ AddressFamily any
+# AddressFamily inet
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
# EscapeChar ~
-# AllowedCertPurpose sslserver
-# MandatoryCRL no
-# CACertificateFile /etc/ssh/ca/ca-bundle.crt
-# CACertificatePath /etc/ssh/ca/crt
-# CARevocationFile /etc/ssh/ca/ca-bundle.crl
-# CARevocationPath /etc/ssh/ca/crl
-# UserCACertificateFile ~/.ssh/ca-bundle.crt
-# UserCACertificatePath ~/.ssh/crt
-# UserCARevocationFile ~/.ssh/ca-bundle.crl
-# UserCARevocationPath ~/.ssh/crl
-# VAType none
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
+# RekeyLimit 1G 1h
-# SendEnv LANG LC_*
+# Send locale environment variables #367017
+#SendEnv LANG LC_*
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
-# Host *
+Host *
+# ForwardAgent no
+# ForwardX11 no
ForwardAgent yes
ForwardX11 yes
# RhostsRSAAuthentication no
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
+
+# SendEnv LANG LC_*
--- /dev/null
+# $OpenBSD$
+
+# This is the ssh client system-wide configuration file. See
+# ssh_config(5) for more information. This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+# 1. command line options
+# 2. user-specific file
+# 3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options. For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+ ForwardAgent yes
+ ForwardX11 yes
+# RhostsRSAAuthentication no
+# RSAAuthentication yes
+# PasswordAuthentication yes
+# HostbasedAuthentication no
+# GSSAPIAuthentication no
+# GSSAPIDelegateCredentials no
+# BatchMode no
+# CheckHostIP yes
+# AddressFamily any
+# ConnectTimeout 0
+# StrictHostKeyChecking ask
+# IdentityFile ~/.ssh/identity
+# IdentityFile ~/.ssh/id_rsa
+# IdentityFile ~/.ssh/id_dsa
+# Port 22
+# Protocol 2,1
+# Cipher 3des
+# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
+# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
+# EscapeChar ~
+# AllowedCertPurpose sslserver
+# MandatoryCRL no
+# CACertificateFile /etc/ssh/ca/ca-bundle.crt
+# CACertificatePath /etc/ssh/ca/crt
+# CARevocationFile /etc/ssh/ca/ca-bundle.crl
+# CARevocationPath /etc/ssh/ca/crl
+# UserCACertificateFile ~/.ssh/ca-bundle.crt
+# UserCACertificatePath ~/.ssh/crt
+# UserCARevocationFile ~/.ssh/ca-bundle.crl
+# UserCARevocationPath ~/.ssh/crl
+# VAType none
+# Tunnel no
+# TunnelDevice any:any
+# PermitLocalCommand no
+# VisualHostKey no
+# ProxyCommand ssh -q -W %h:%p gateway.example.com
-# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
+# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
+# IdentityFile ~/.ssh/id_ecdsa
+# IdentityFile ~/.ssh/id_ed25519
# Port 22
-# Protocol 2,1
+# Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
-# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
+# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#LoginGraceTime 2m
#PermitRootLogin no
+#PermitRootLogin prohibit-password
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
-# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
+# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
+#UseDNS no
+#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
-# $OpenBSD$
+# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
-# "key type names" for X.509 certificates with RSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
-
-# "key type names" for X.509 certificates with DSA key
-# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
-#X509KeyAlgorithm x509v3-sign-dss,dss-raw
-
-# The intended use for the X509 client certificate. Without this option
-# no chain verification will be done. Currently accepted uses are case
-# insensitive:
-# - "sslclient", "SSL client", "SSL_client" or "client"
-# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
-# - "skip" or ""(empty): don`t check purpose.
-#AllowedCertPurpose sslclient
-
-# Specifies whether self-issued(self-signed) X.509 certificate can be
-# allowed only by entry in AutorizedKeysFile that contain matching
-# public key or certificate blob.
-#KeyAllowSelfIssued no
-
-# Specifies whether CRL must present in store for all certificates in
-# certificate chain with atribute "cRLDistributionPoints"
-#MandatoryCRL no
-
-# A file with multiple certificates of certificate signers
-# in PEM format concatenated together.
-#CACertificateFile /etc/ssh/ca/ca-bundle.crt
-
-# A directory with certificates of certificate signers.
-# The certificates should have name of the form: [HASH].[NUMBER]
-# or have symbolic links to them of this form.
-#CACertificatePath /etc/ssh/ca/crt
-
-# A file with multiple CRL of certificate signers
-# in PEM format concatenated together.
-#CARevocationFile /etc/ssh/ca/ca-bundle.crl
-
-# A directory with CRL of certificate signers.
-# The CRL should have name of the form: [HASH].r[NUMBER]
-# or have symbolic links to them of this form.
-#CARevocationPath /etc/ssh/ca/crl
-
-# LDAP protocol version.
-# Example:
-# CAldapVersion 2
-
-# Note because of OpenSSH options parser limitation
-# use %3D instead of = !
-# LDAP initialization may require URL to be escaped, i.e.
-# use %2C instead of ,(comma). Escaped URL don't depend from
-# LDAP initialization method.
-# Example:
-# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
-
-# SSH can use "Online Certificate Status Protocol"(OCSP)
-# to validate certificate. Set VAType to
-# - none : do not use OCSP to validate certificates;
-# - ocspcert: validate only certificates that specify `OCSP
-# Service Locator' URL;
-# - ocspspec: use specified in the configuration 'OCSP Responder'
-# to validate all certificates.
-#VAType none
-
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
-#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
# Allow client to pass locale environment variables
AcceptEnv LANG LC_*
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# the following are HPN related configuration options
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-
+
# disable hpn performance boosts
#HPNDisabled no
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
+#PermitTTY yes
PrintMotd no
PrintLastLog no
#TCPKeepAlive yes
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
+# PermitTTY no
# ForceCommand cvs server
# Allow client to pass locale environment variables #367017
# "key type names" for X.509 certificates with RSA key
# Note first defined is used in signature operations!
-#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
# "key type names" for X.509 certificates with DSA key
# Note first defined is used in signature operations!
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
+# Ciphers and keying
+#RekeyLimit default none
+
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
# but this is overridden so installations will only check .ssh/authorized_keys
#AuthorizedKeysFile .ssh/authorized_keys
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
PrintLastLog no
#TCPKeepAlive yes
#UseLogin no
-#UsePrivilegeSeparation yes
+UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
-#MaxStartups 10
+#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
+#VersionAddendum none
# no default banner path
#Banner none
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
-# allow the use of the none cipher
-#NoneEnabled no
-
-# disable hpn performance boosts.
+# disable hpn performance boosts
#HPNDisabled no
# buffer size for hpn to non-hpn connections
#HPNBufferSize 2048
+# allow the use of the none cipher
+#NoneEnabled no
+
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options change a
+# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
# Authentication:
#LoginGraceTime 2m
-PermitRootLogin no
+#PermitRootLogin no
+PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# no default banner path
#Banner none
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
-# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $
+# $OpenBSD$
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# no default banner path
#Banner none
-# here are the new patched ldap related tokens
-# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
-#UseLPK yes
-#LpkLdapConf /etc/ldap.conf
-#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
-#LpkUserDN ou=users,dc=phear,dc=org
-#LpkGroupDN ou=groups,dc=phear,dc=org
-#LpkBindDN cn=Manager,dc=phear,dc=org
-#LpkBindPw secret
-#LpkServerGroup mail
-#LpkFilter (hostAccess=master.phear.org)
-#LpkForceTLS no
-#LpkSearchTimelimit 3
-#LpkBindTimelimit 3
-#LpkPubKeyAttr sshPublicKey
-
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
-# $OpenBSD$
+# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# no default banner path
#Banner none
+# here are the new patched ldap related tokens
+# entries in your LDAP must have posixAccount & ldapPublicKey objectclass
+#UseLPK yes
+#LpkLdapConf /etc/ldap.conf
+#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/
+#LpkUserDN ou=users,dc=phear,dc=org
+#LpkGroupDN ou=groups,dc=phear,dc=org
+#LpkBindDN cn=Manager,dc=phear,dc=org
+#LpkBindPw secret
+#LpkServerGroup mail
+#LpkFilter (hostAccess=master.phear.org)
+#LpkForceTLS no
+#LpkSearchTimelimit 3
+#LpkBindTimelimit 3
+#LpkPubKeyAttr sshPublicKey
+
# override default of no subsystems
-Subsystem sftp /usr/lib/misc/sftp-server
+Subsystem sftp /usr/lib64/misc/sftp-server
# the following are HPN related configuration options
# tcp receive buffer polling. disable in non autotuning kernels
--- /dev/null
+# $OpenBSD$
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options change a
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+
+# "key type names" for X.509 certificates with RSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5
+#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1
+
+# "key type names" for X.509 certificates with DSA key
+# Note first defined is used in signature operations!
+#X509KeyAlgorithm x509v3-sign-dss,dss-asn1
+#X509KeyAlgorithm x509v3-sign-dss,dss-raw
+
+# The intended use for the X509 client certificate. Without this option
+# no chain verification will be done. Currently accepted uses are case
+# insensitive:
+# - "sslclient", "SSL client", "SSL_client" or "client"
+# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose"
+# - "skip" or ""(empty): don`t check purpose.
+#AllowedCertPurpose sslclient
+
+# Specifies whether self-issued(self-signed) X.509 certificate can be
+# allowed only by entry in AutorizedKeysFile that contain matching
+# public key or certificate blob.
+#KeyAllowSelfIssued no
+
+# Specifies whether CRL must present in store for all certificates in
+# certificate chain with atribute "cRLDistributionPoints"
+#MandatoryCRL no
+
+# A file with multiple certificates of certificate signers
+# in PEM format concatenated together.
+#CACertificateFile /etc/ssh/ca/ca-bundle.crt
+
+# A directory with certificates of certificate signers.
+# The certificates should have name of the form: [HASH].[NUMBER]
+# or have symbolic links to them of this form.
+#CACertificatePath /etc/ssh/ca/crt
+
+# A file with multiple CRL of certificate signers
+# in PEM format concatenated together.
+#CARevocationFile /etc/ssh/ca/ca-bundle.crl
+
+# A directory with CRL of certificate signers.
+# The CRL should have name of the form: [HASH].r[NUMBER]
+# or have symbolic links to them of this form.
+#CARevocationPath /etc/ssh/ca/crl
+
+# LDAP protocol version.
+# Example:
+# CAldapVersion 2
+
+# Note because of OpenSSH options parser limitation
+# use %3D instead of = !
+# LDAP initialization may require URL to be escaped, i.e.
+# use %2C instead of ,(comma). Escaped URL don't depend from
+# LDAP initialization method.
+# Example:
+# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom
+
+# SSH can use "Online Certificate Status Protocol"(OCSP)
+# to validate certificate. Set VAType to
+# - none : do not use OCSP to validate certificates;
+# - ocspcert: validate only certificates that specify `OCSP
+# Service Locator' URL;
+# - ocspspec: use specified in the configuration 'OCSP Responder'
+# to validate all certificates.
+#VAType none
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin no
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/misc/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts.
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
-# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
+# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
PrintLastLog no
#TCPKeepAlive yes
#UseLogin no
-UsePrivilegeSeparation sandbox # Default for new installations.
+#UsePrivilegeSeparation sandbox
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
-# the following are HPN related configuration options
-# tcp receive buffer polling. disable in non autotuning kernels
-#TcpRcvBufPoll yes
-
-# disable hpn performance boosts
-#HPNDisabled no
-
-# buffer size for hpn to non-hpn connections
-#HPNBufferSize 2048
-
-
-# allow the use of the none cipher
-#NoneEnabled no
-
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# Subscription configuration file for CUPS v2.0.3
-# Written by cupsd on 2016-04-05 17:09
-NextSubscriptionId 260
-<Subscription 259>
+# Written by cupsd on 2016-04-06 07:23
+NextSubscriptionId 262
+<Subscription 260>
+Events printer-changed
+Owner root
+LeaseDuration 86400
+Interval 60
+ExpirationTime 1460006606
+NextEventId 1
+</Subscription>
+<Subscription 261>
Events all
Owner anonymous
Recipient dbus://
LeaseDuration 86400
Interval 0
-ExpirationTime 1459955367
+ExpirationTime 1460006606
NextEventId 1
</Subscription>
-# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
+# $OpenBSD: ssh_config,v 1.30 2016/02/20 23:06:23 sobrado Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
+# IdentityFile ~/.ssh/id_ecdsa
+# IdentityFile ~/.ssh/id_ed25519
# Port 22
-# Protocol 2,1
+# Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
-# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $
+# $OpenBSD: sshd_config,v 1.98 2016/02/17 05:29:04 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
PrintLastLog no
#TCPKeepAlive yes
#UseLogin no
-UsePrivilegeSeparation sandbox # Default for new installations.
+#UsePrivilegeSeparation sandbox
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
-# the following are HPN related configuration options
-# tcp receive buffer polling. disable in non autotuning kernels
-#TcpRcvBufPoll yes
-
-# disable hpn performance boosts
-#HPNDisabled no
-
-# buffer size for hpn to non-hpn connections
-#HPNBufferSize 2048
-
-
-# allow the use of the none cipher
-#NoneEnabled no
-
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
projects / config / bruni / etc.git / commitdiff