committing changes in /etc after emerge run

Package changes:
+sys-apps/smartmontools-5.42

diff --git a/.etckeeper b/.etckeeper
index b2c7d20879ad2732f0839d0ad22ab50a83524196..2de75806dfea42e7d428f44f06d98b8ed4bbec9e 100755 (executable)
--- a/.etckeeper
+++ b/.etckeeper
@@ -213,6 +213,7 @@ maybe chmod 0644 './conf.d/rsyncd'
 maybe chmod 0644 './conf.d/samba'
 maybe chmod 0644 './conf.d/saslauthd'
 maybe chmod 0644 './conf.d/slapd'
+maybe chmod 0644 './conf.d/smartd'
 maybe chmod 0644 './conf.d/sshd'
 maybe chmod 0644 './conf.d/staticroute'
 maybe chmod 0644 './conf.d/svnserve'
@@ -707,6 +708,7 @@ maybe chmod 0755 './init.d/savecache'
 maybe chmod 0755 './init.d/shutdown.sh'
 maybe chmod 0755 './init.d/slapd'
 maybe chmod 0755 './init.d/slpd'
+maybe chmod 0755 './init.d/smartd'
 maybe chmod 0755 './init.d/sshd'
 maybe chmod 0755 './init.d/staticroute'
 maybe chmod 0755 './init.d/svnserve'
@@ -1090,6 +1092,7 @@ maybe chmod 0644 './slp.conf'
 maybe chmod 0644 './slp.reg'
 maybe chmod 0644 './slp.spi'
 maybe chmod 0644 './slsh.rc'
+maybe chmod 0644 './smartd.conf'
 maybe chmod 0755 './sound'
 maybe chmod 0755 './sound/events'
 maybe chmod 0644 './sound/events/gnome-2.soundlist'

diff --git a/conf.d/smartd b/conf.d/smartd
new file mode 100644 (file)
index 0000000..4b7db4d
--- /dev/null
+++ b/conf.d/smartd
@@ -0,0 +1,4 @@
+# /etc/conf.d/smartd: config file for /etc/init.d/smartd
+
+# Insert any other options needed
+SMARTD_OPTS=""

diff --git a/init.d/smartd b/init.d/smartd
new file mode 100755 (executable)
index 0000000..131a7d4
--- /dev/null
+++ b/init.d/smartd
@@ -0,0 +1,43 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/smartmontools/files/smartd.rc,v 1.9 2011/09/15 07:58:50 polynomial-c Exp $
+
+depend() {
+    need localmount
+    after bootmisc
+}
+
+extra_started_commands="reload"
+
+checkconfig() {
+       if [ ! -f "/etc/smartd.conf" ] ; then
+               eerror "You should setup your /etc/smartd.conf file!"
+               eerror "See the smartd.conf(5) manpage."
+               return 1
+       fi
+       return 0
+}
+
+start() {
+       checkconfig || return 1
+
+       ebegin "Starting S.M.A.R.T. monitoring daemon"
+       start-stop-daemon --start --exec /usr/sbin/smartd \
+           --pidfile /var/run/smartd.pid \
+           -- -p /var/run/smartd.pid ${SMARTD_OPTS}
+       eend $?
+}
+
+stop() {
+       ebegin "Stopping S.M.A.R.T. monitoring daemon"
+       start-stop-daemon --stop --exec /usr/sbin/smartd \
+           --pidfile /var/run/smartd.pid
+       eend $?
+}
+
+reload() {
+       ebegin "Reloading configuration"
+       start-stop-daemon --signal HUP --pidfile /var/run/smartd.pid smartd
+       eend $?
+}

diff --git a/smartd.conf b/smartd.conf
new file mode 100644 (file)
index 0000000..7605d5c
--- /dev/null
+++ b/smartd.conf
@@ -0,0 +1,144 @@
+# Sample configuration file for smartd.  See man smartd.conf.
+
+# Home page is: http://smartmontools.sourceforge.net
+
+# $Id: smartd.conf 3128 2010-07-27 13:08:31Z chrfranke $
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices.  DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found.  Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+DEVICESCAN
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First (primary) ATA/IDE hard disk.  Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/hdb -H -l error -l selftest -t -I 194 
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check.  Only report SMART health status if it fails
+# But send an email in this case
+#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks.  This will monitor everything that smartd can
+# monitor.  Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4, 
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED.  Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am. 
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+#   -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+#   -T TYPE set the tolerance to one of: normal, permissive
+#   -o VAL  Enable/disable automatic offline tests (on/off)
+#   -S VAL  Enable/disable attribute autosave (on/off)
+#   -n MODE No check. MODE is one of: never, sleep, standby, idle
+#   -H      Monitor SMART Health Status, report if failed
+#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
+#   -f      Monitor for failure of any 'Usage' Attributes
+#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
+#   -M TYPE Modify email warning behavior (see man page)
+#   -s REGE Start self-test when type/date matches regular expression (see man page)
+#   -p      Report changes in 'Prefailure' Normalized Attributes
+#   -u      Report changes in 'Usage' Normalized Attributes
+#   -t      Equivalent to -p and -u Directives
+#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
+#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
+#   -i ID   Ignore Attribute ID for -f Directive
+#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
+#   -C ID   Report if Current Pending Sector count non-zero
+#   -U ID   Report if Offline Uncorrectable count non-zero
+#   -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+#   -v N,ST Modifies labeling of Attribute N (see man page)
+#   -a      Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+#   -P TYPE Drive-specific presets: use, ignore, show, showall
+#    #      Comment: text after a hash sign is ignored
+#    \      Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# DEVICESCAN may be followed by any desired Directives.