--- /dev/null
+# /etc/conf.d/rsyslog
+
+# Configuration file
+RSYSLOG_CONFIGFILE="/etc/rsyslog.conf"
+
+# PID file
+# If you should ever change this, remember to update
+# "/etc/logrotate.d/rsyslog", too.
+RSYSLOG_PIDFILE="/run/rsyslogd.pid"
+
+# You can use this configuration option to pass additional options to the
+# start-stop-daemon, see start-stop-daemon(8) for more details.
+# Per default we wait 1000ms after we have started the service to ensure
+# that the daemon is really up and running.
+RSYSLOG_SSDARGS="--wait 1000"
+
+# The termination timeout (start-stop-daemon parameter "retry") ensures
+# that the service will be terminated within a given time (60 + 5 seconds
+# per default) when you are stopping the service.
+# You need to increase the value when you are working with a large queue.
+# See http://www.rsyslog.com/doc/queues.html for further information.
+RSYSLOG_TERMTIMEOUT="TERM/60/KILL/5"
+
+
+# Options to rsyslogd
+# See rsyslogd(8) for more details
+# Notes:
+# * Do not specify another PIDFILE but use the variable above to change the location
+# * Do not specify another CONFIGFILE but use the variable above to change the location
+RSYSLOG_OPTS=""
--- /dev/null
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmpd.conf,v 1.8 2006/11/26 21:37:22 cedk Exp $
+
+# Initial (empty) options.
+SNMPD_FLAGS=""
+
+# Enable connection logging.
+#SNMPD_FLAGS="${SNMPD_FLAGS} -a"
+
+# Enable syslog and disable file log.
+#SNMPD_FLAGS="${SNMPD_FLAGS} -Lsd -Lf /dev/null"
+
+# Enable agentx socket as /var/agentx/master
+# *NOTE* Before uncommenting this, make sure
+# the /var/agentx directory exists.
+#SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
--- /dev/null
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmptrapd.conf,v 1.1 2005/01/28 11:19:25 ka0ttic Exp $
+
+# extra flags to pass to snmptrapd
+SNMPTRAPD_FLAGS=""
+
+# ignore authentication failure traps
+#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -a"
+
+# log messages to specified file
+#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -Lf /var/log/snmptrapd.log"
+
+# log messages to syslog with the specified facility
+# where facility is: 'd' = LOG_DAEMON, 'u' = LOG_USER, [0-7] = LOG_LOCAL[0-7]
+#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -Ls d"
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-admin/rsyslog/files/8-stable/rsyslog.initd,v 1.1 2014/09/30 13:09:39 polynomial-c Exp $
+
+RSYSLOG_CONFIGFILE=${RSYSLOG_CONFIGFILE:-"/etc/rsyslog.conf"}
+RSYSLOG_PIDFILE=${RSYSLOG_PIDFILE:-"/run/rsyslogd.pid"}
+
+command="/usr/sbin/rsyslogd"
+command_args="${RSYSLOG_OPTS} -f ${RSYSLOG_CONFIGFILE} -i ${RSYSLOG_PIDFILE}"
+start_stop_daemon_args="${RSYSLOG_SSDARGS}"
+pidfile="${RSYSLOG_PIDFILE}"
+retry="${RSYSLOG_TERMTIMEOUT}"
+
+required_files="${RSYSLOG_CONFIGFILE}"
+
+description="RSYSLOG is the rocket-fast system for log processing (syslog replacement)."
+
+extra_commands="configtest"
+extra_started_commands="rotate"
+
+description_configtest="Run rsyslogd's internal config check."
+
+description_rotate="Sends rsyslogd a signal to re-open its log files."
+
+depend() {
+ need clock hostname localmount
+ provide logger
+}
+
+start_pre() {
+ if [ "${RC_CMD}" != "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_pre() {
+ if [ "${RC_CMD}" = "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_post() {
+ rm -f ${RSYSLOG_PIDFILE}
+}
+
+configtest() {
+ # This will currently only detect fatal errors
+ # See https://github.com/rsyslog/rsyslog/issues/79
+
+ local _test_command="${command} -N 999 -f ${RSYSLOG_CONFIGFILE}"
+ local _retval=0
+
+ ebegin "Checking rsyslogd's configuration"
+ ${_test_command} >/dev/null 2>&1
+ _retval=$?
+
+ if [ ${_retval} -ne 0 ]; then
+ ${_test_command}
+ fi
+
+ eend ${_retval} "failed, please correct errors above"
+}
+
+rotate() {
+ ebegin "Re-opening rsyslogd logs"
+ start-stop-daemon --signal SIGHUP --pidfile "${RSYSLOG_PIDFILE}"
+ eend $?
+}
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmpd.init.2,v 1.3 2012/10/22 02:57:05 flameeyes Exp $
+
+SNMPD_PIDFILE="${SNMPD_PIDFILE:-/var/run/snmpd.pid}"
+
+extra_started_commands="reload"
+
+command="/usr/sbin/snmpd"
+command_args="-p ${SNMPD_PIDFILE} ${SNMPD_FLAGS}"
+pidfile="${SNMPD_PIDFILE}"
+
+depend() {
+ use logger
+}
+
+checkconfig() {
+ if [ ! -e /etc/snmp/snmpd.conf ] ; then
+ eerror "${SVCNAME} requires an /etc/snmp/snmpd.conf configuration file"
+ return 1
+ fi
+}
+
+start_pre() {
+ checkconfig || return 1
+}
+
+reload() {
+ checkconfig || return 1
+
+ ebegin "Reloading ${SVCNAME} configuration"
+ kill -HUP $(cat ${SNMPD_PIDFILE}) 2>&1 > /dev/null
+ eend $?
+}
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmptrapd.init.2,v 1.2 2012/10/22 02:57:05 flameeyes Exp $
+
+SNMPTRAPD_PIDFILE="${SNMPTRAPD_PIDFILE:-/var/run/snmptrapd.pid}"
+
+command="/usr/sbin/snmptrapd"
+command_args="-p ${SNMPTRAPD_PIDFILE} ${SNMPTRAPD_FLAGS}"
+pidfile="${SNMPTRAPD_PIDFILE}"
+
+depend() {
+ use logger
+}
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+#/var/log/auth.log
+#/var/log/cron.log
+#/var/log/daemon.log
+#/var/log/kern.log
+#/var/log/lpr.log
+#/var/log/mail.log
+#/var/log/news.log
+#/var/log/user.log
+#/var/log/debug.log
+#/var/log/messages
+#{
+# rotate 4
+# weekly
+# missingok
+# notifempty
+# compress
+# delaycompress
+# sharedscripts
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+script syslog-reload
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null || true
+endscript
+
+/var/log/messages /var/log/syslog {
+ daily
+ olddir /var/log/.old/%Y-%m
+ size 1024K
+ postrotate syslog-reload
+}
+
+/var/log/syslog.d/* {
+ daily
+ olddir /var/log/syslog.d/.old/%Y-%m
+ size 1024K
+ postrotate syslog-reload
+ maxage 1y
+}
+
+/var/log/debug.log /var/log/debug /var/log/all /var/log/all.log {
+ daily
+ olddir /var/log/.old/%Y-%m
+ size 4M
+ postrotate syslog-reload
+ maxage 6m
+}
+
+
+++ /dev/null
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.logrotate.in,v 1.1 2014/01/22 04:25:35 mr_bones_ Exp $
-#
-# Syslog-ng logrotate snippet for Gentoo Linux
-# contributed by Michael Sterrett
-#
-
-script syslog-reload
- /etc/init.d/syslog-ng reload >/dev/null || true
-endscript
-
-rotate 10
-
-/var/log/messages {
- daily
- olddir /var/log/old/%Y-%m
- size 1024K
- postrotate syslog-reload
-}
-
-/var/log/all /var/log/debug /var/log/syslog {
- daily
- olddir /var/log/old/%Y-%m
- size 4M
- maxage 6m
- postrotate syslog-reload
-}
-
-/var/log/syslog.d/* {
- daily
- olddir /var/log/syslog.d/old/%Y-%m
- size 1024K
- maxage 1y
- postrotate syslog-reload
-}
-
-# Generated by net-scripts for interface eth0
-domain brehm-online.com
-search home.brehm-online.com home.hennig-berlin.org brehm-online.com hennig-berlin.org uhu-banane.de
-nameserver 10.12.11.254
-#nameserver 127.0.0.1
+# Hand made by Frank Brehm
+domain home.brehm-online.com
+#search home.brehm-online.com brehm-online.com hennig-berlin.org uhu-banane.de pb.local dc1.pb.local dc2.pb.local
+search home.brehm-online.com brehm-online.com uhu-banane.de pb.local dc1.de.profitbricks.net dc2.us.profitbricks.net dc3.de.profitbricks.net
+#nameserver 10.12.11.1
+nameserver 192.168.178.30
+nameserver 192.168.178.89
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+#$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+#module(load="immark" Interval="600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_TraditionalFileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+#######################
+### DEFAULT ACTIONS ###
+#######################
+
+#auth,authpriv.* action(
+# type="omfile"
+# File="/var/log/auth.log"
+# FileCreateMode="0600"
+# FileOwner="root"
+# FileGroup="adm"
+# Sync="off"
+#)
+
+#cron.* action(
+# type="omfile"
+# File="/var/log/cron.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#daemon.* action(
+# type="omfile"
+# File="/var/log/daemon.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#kern.* action(
+# type="omfile"
+# File="/var/log/kern.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#lpr.* action(
+# type="omfile"
+# File="/var/log/lpr.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#mail.* action(
+# type="omfile"
+# File="/var/log/mail.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#news.* action(
+# type="omfile"
+# File="/var/log/news.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#user.* action(
+# type="omfile"
+# File="/var/log/user.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+*.=debug;auth,authpriv,news,mail.none action(
+ type="omfile"
+ File="/var/log/debug.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.info;auth,authpriv,cron,daemon,lpr,mail,news.none action(
+ type="omfile"
+ File="/var/log/messages"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+# Uncomment the following directive to re-enable the
+# deprecated "/var/log/syslog" log file (don't forget to re-enable log
+# rotation in "/etc/logrotate.d/rsyslog" if you do that!)
+*.*;auth,authpriv.none,mail.none action(
+ type="omfile"
+ File="/var/log/syslog"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.emerg action(
+ type="omusrmsg"
+ Users="*"
+ action.execOnlyOnceEveryInterval="10"
+)
+
+# Create an additional socket for the default chroot location
+# (used by net-misc/openssh[hpn], see https://bugs.gentoo.org/490744)
+input(type="imuxsock" Socket="/var/empty/dev/log")
--- /dev/null
+
+template (
+ name="facility"
+ type="string"
+ string="/var/log/syslog.d/%syslogfacility-text%.log"
+)
+
+*.* action(
+ type="omfile"
+ DynaFile="facility"
+ DirCreateMode="0755"
+ FileCreateMode="0644"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.* action(
+ type="omfile"
+ File="/var/log/all.log"
+ FileOwner="root"
+ FileGroup="adm"
+ Sync="off"
+)
+
+*.warn;news,mail.none action(
+ type="omfile"
+ File="/dev/tty12"
+ FileOwner="root"
+ FileGroup="root"
+)
+
+# vim: filetype=conf
--- /dev/null
+/etc/init.d/rsyslog
\ No newline at end of file
+++ /dev/null
-/etc/init.d/syslog-ng
\ No newline at end of file
--- /dev/null
+###############################################################################
+#
+# EXAMPLE.conf:
+# An example configuration file for configuring the Net-SNMP agent ('snmpd')
+# See the 'snmpd.conf(5)' man page for details
+#
+# Some entries are deliberately commented out, and will need to be explicitly activated
+#
+###############################################################################
+#
+# AGENT BEHAVIOUR
+#
+
+# Listen for connections from the local system only
+agentAddress udp:127.0.0.1:161
+# Listen for connections on all interfaces (both IPv4 *and* IPv6)
+#agentAddress udp:161,udp6:[::1]:161
+
+
+
+###############################################################################
+#
+# SNMPv3 AUTHENTICATION
+#
+# Note that these particular settings don't actually belong here.
+# They should be copied to the file /var/net-snmp/snmpd.conf
+# and the passwords changed, before being uncommented in that file *only*.
+# Then restart the agent
+
+# createUser authOnlyUser MD5 "remember to change this password"
+# createUser authPrivUser SHA "remember to change this one too" DES
+# createUser internalUser MD5 "this is only ever used internally, but still change the password"
+
+# If you also change the usernames (which might be sensible),
+# then remember to update the other occurances in this example config file to match.
+
+
+
+###############################################################################
+#
+# ACCESS CONTROL
+#
+
+ # system + hrSystem groups only
+view systemonly included .1.3.6.1.2.1.1
+view systemonly included .1.3.6.1.2.1.25.1
+
+ # Full access from the local host
+#rocommunity public localhost
+ # Default access to basic system info
+ rocommunity public default -V systemonly
+
+ # Full access from an example network
+ # Adjust this network address to match your local
+ # settings, change the community string,
+ # and check the 'agentAddress' setting above
+#rocommunity secret 10.0.0.0/16
+
+ # Full read-only access for SNMPv3
+ rouser authOnlyUser
+ # Full write access for encrypted requests
+ # Remember to activate the 'createUser' lines above
+#rwuser authPrivUser priv
+
+# It's no longer typically necessary to use the full 'com2sec/group/access' configuration
+# r[ou]user and r[ow]community, together with suitable views, should cover most requirements
+
+
+
+###############################################################################
+#
+# SYSTEM INFORMATION
+#
+
+# Note that setting these values here, results in the corresponding MIB objects being 'read-only'
+# See snmpd.conf(5) for more details
+sysLocation Sitting on the Dock of the Bay
+sysContact Me <me@example.org>
+ # Application + End-to-End layers
+sysServices 72
+
+
+#
+# Process Monitoring
+#
+ # At least one 'mountd' process
+proc mountd
+ # No more than 4 'ntalkd' processes - 0 is OK
+proc ntalkd 4
+ # At least one 'sendmail' process, but no more than 10
+proc sendmail 10 1
+
+# Walk the UCD-SNMP-MIB::prTable to see the resulting output
+# Note that this table will be empty if there are no "proc" entries in the snmpd.conf file
+
+
+#
+# Disk Monitoring
+#
+ # 10MBs required on root disk, 5% free on /var, 10% free on all other disks
+disk / 10000
+disk /var 5%
+includeAllDisks 10%
+
+# Walk the UCD-SNMP-MIB::dskTable to see the resulting output
+# Note that this table will be empty if there are no "disk" entries in the snmpd.conf file
+
+
+#
+# System Load
+#
+ # Unacceptable 1-, 5-, and 15-minute load averages
+load 12 10 5
+
+# Walk the UCD-SNMP-MIB::laTable to see the resulting output
+# Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file
+
+
+
+###############################################################################
+#
+# ACTIVE MONITORING
+#
+
+ # send SNMPv1 traps
+ trapsink localhost public
+ # send SNMPv2c traps
+#trap2sink localhost public
+ # send SNMPv2c INFORMs
+#informsink localhost public
+
+# Note that you typically only want *one* of these three lines
+# Uncommenting two (or all three) will result in multiple copies of each notification.
+
+
+#
+# Event MIB - automatically generate alerts
+#
+ # Remember to activate the 'createUser' lines above
+iquerySecName internalUser
+rouser internalUser
+ # generate traps on UCD error conditions
+defaultMonitors yes
+ # generate traps on linkUp/Down
+linkUpDownNotifications yes
+
+
+
+###############################################################################
+#
+# EXTENDING THE AGENT
+#
+
+#
+# Arbitrary extension commands
+#
+ extend test1 /bin/echo Hello, world!
+ extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35
+#extend-sh test3 /bin/sh /tmp/shtest
+
+# Note that this last entry requires the script '/tmp/shtest' to be created first,
+# containing the same three shell commands, before the line is uncommented
+
+# Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable, nsExtendOutput1Table
+# and nsExtendOutput2Table) to see the resulting output
+
+# Note that the "extend" directive supercedes the previous "exec" and "sh" directives
+# However, walking the UCD-SNMP-MIB::extTable should still returns the same output,
+# as well as the fuller results in the above tables.
+
+
+#
+# "Pass-through" MIB extension command
+#
+#pass .1.3.6.1.4.1.8072.2.255 /bin/sh PREFIX/local/passtest
+#pass .1.3.6.1.4.1.8072.2.255 /usr/bin/perl PREFIX/local/passtest.pl
+
+# Note that this requires one of the two 'passtest' scripts to be installed first,
+# before the appropriate line is uncommented.
+# These scripts can be found in the 'local' directory of the source distribution,
+# and are not installed automatically.
+
+# Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the resulting output
+
+
+#
+# AgentX Sub-agents
+#
+ # Run as an AgentX master agent
+ master agentx
+ # Listen for network connections (from localhost)
+ # rather than the default named socket /var/agentx/master
+#agentXSocket tcp:localhost:705
projects / config / bruni / etc.git / commitdiff