# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (no) (never) (100)
# ==========================================================================
-smtp inet n - y - - smtpd
-#smtp inet n - y - 1 postscreen
-#smtpd pass - - y - - smtpd
-#dnsblog unix - - y - 0 dnsblog
-#tlsproxy unix - - y - 0 tlsproxy
-# Choose one: enable submission for loopback clients only, or for any client.
-#127.0.0.1:submission inet n - y - - smtpd
-#submission inet n - y - - smtpd
-# -o syslog_name=postfix/submission
-# -o smtpd_tls_security_level=encrypt
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_tls_auth_only=yes
-# -o smtpd_reject_unlisted_recipient=no
-# Instead of specifying complex smtpd_<xxx>_restrictions here,
-# specify "smtpd_<xxx>_restrictions=$mua_<xxx>_restrictions"
-# here, and specify mua_<xxx>_restrictions in main.cf (where
-# "<xxx>" is "client", "helo", "sender", "relay", or "recipient").
-# -o smtpd_client_restrictions=
-# -o smtpd_helo_restrictions=
-# -o smtpd_sender_restrictions=
-# -o smtpd_relay_restrictions=
-# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
-# Choose one: enable submissions for loopback clients only, or for any client.
-#127.0.0.1:submissions inet n - y - - smtpd
-#submissions inet n - y - - smtpd
-# -o syslog_name=postfix/submissions
-# -o smtpd_tls_wrappermode=yes
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_reject_unlisted_recipient=no
-# Instead of specifying complex smtpd_<xxx>_restrictions here,
-# specify "smtpd_<xxx>_restrictions=$mua_<xxx>_restrictions"
-# here, and specify mua_<xxx>_restrictions in main.cf (where
-# "<xxx>" is "client", "helo", "sender", "relay", or "recipient").
-# -o smtpd_client_restrictions=
-# -o smtpd_helo_restrictions=
-# -o smtpd_sender_restrictions=
-# -o smtpd_relay_restrictions=
-# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
-#628 inet n - y - - qmqpd
-pickup unix n - y 60 1 pickup
-cleanup unix n - y - 0 cleanup
-qmgr unix n - n 300 1 qmgr
-#qmgr unix n - n 300 1 oqmgr
-tlsmgr unix - - y 1000? 1 tlsmgr
-rewrite unix - - y - - trivial-rewrite
-bounce unix - - y - 0 bounce
-defer unix - - y - 0 bounce
-trace unix - - y - 0 bounce
-verify unix - - y - 1 verify
-flush unix n - y 1000? 0 flush
-proxymap unix - - n - - proxymap
-proxywrite unix - - n - 1 proxymap
-smtp unix - - y - - smtp
-relay unix - - y - - smtp
+smtp inet n - y - 1 postscreen
+smtpd pass - - y - - smtpd
+dnsblog unix - - y - 0 dnsblog
+tlsproxy unix - - y - 0 tlsproxy
+#628 inet n - y - - qmqpd
+pickup unix n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+#qmgr unix n - n 300 1 oqmgr
+qmgr unix n - n 300 1 qmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - n - - smtp
+relay unix - - n - - smtp
-o syslog_name=postfix/$service_name
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
-showq unix n - y - - showq
-error unix - - y - - error
-retry unix - - y - - error
-discard unix - - y - - discard
-local unix - n n - - local
-virtual unix - n n - - virtual
-lmtp unix - - y - - lmtp
-anvil unix - - y - 1 anvil
-scache unix - - y - 1 scache
-postlog unix-dgram n - n - 1 postlogd
-#
-# ====================================================================
-# Interfaces to non-Postfix software. Be sure to examine the manual
-# pages of the non-Postfix software to find out what options it wants.
-#
-# Many of the following services use the Postfix pipe(8) delivery
-# agent. See the pipe(8) man page for information about ${recipient}
-# and other message envelope options.
-# ====================================================================
-#
-# maildrop. See the Postfix MAILDROP_README file for details.
-# Also specify in main.cf: maildrop_destination_recipient_limit=1
-#
-maildrop unix - n n - - pipe
- flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
-#
-# ====================================================================
-#
-# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
-#
-# Specify in cyrus.conf:
-# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
-#
-# Specify in main.cf one or more of the following:
-# mailbox_transport = lmtp:inet:localhost
-# virtual_transport = lmtp:inet:localhost
-#
-# ====================================================================
-#
-# Cyrus 2.1.5 (Amos Gouaux)
-# Also specify in main.cf: cyrus_destination_recipient_limit=1
-#
-#cyrus unix - n n - - pipe
-# flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
-#
-# ====================================================================
-# Old example of delivery via Cyrus.
-#
-#old-cyrus unix - n n - - pipe
-# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
-#
-# ====================================================================
-#
-# See the Postfix UUCP_README file for configuration details.
-#
-uucp unix - n n - - pipe
- flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
-#
-# Other external delivery methods.
-#
-ifmail unix - n n - - pipe
- flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
-bsmtp unix - n n - - pipe
- flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+postlog unix-dgram n - n - 1 postlogd
+maildrop unix - n n - - pipe
+ flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+uucp unix - n n - - pipe
+ flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+ifmail unix - n n - - pipe
+ flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+bsmtp unix - n n - - pipe
+ flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
- flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
-mailman unix - n n - - pipe
- flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}
+ flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
+mailman unix - n n - - pipe
+ flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}
+
+# Submission, port 587, force TLS connection.
+submission inet n - n - - smtpd
+ -o syslog_name=postfix/submission
+ -o smtpd_tls_security_level=encrypt
+ -o smtpd_sasl_auth_enable=yes
+ -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+
+# Use dovecot's `deliver` program as LDA.
+dovecot unix - n n - - pipe
+ flags=DRh user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${domain} -m ${extension}
+
+# mlmmj - mailing list manager
+# ${nexthop} is '%d/%u' in transport ('mlmmj:%d/%u')
+mlmmj unix - n n - - pipe
+ flags=ORhu user=mlmmj:mlmmj argv=/usr/bin/mlmmj-amime-receive -L /var/vmail/mlmmj/${nexthop}
+
+# Amavisd integration.
+#smtp-amavis unix - - n - 4 smtp
+# -o syslog_name=postfix/amavis
+# -o smtp_data_done_timeout=1200
+# -o smtp_send_xforward_command=yes
+# -o disable_dns_lookups=yes
+# -o max_use=20
+
+# smtp port used by Amavisd to re-inject scanned email back to Postfix
+#127.0.0.1:10025 inet n - n - - smtpd
+# -o syslog_name=postfix/10025
+# -o content_filter=
+# -o mynetworks_style=host
+# -o mynetworks=127.0.0.0/8
+# -o local_recipient_maps=
+# -o relay_recipient_maps=
+# -o strict_rfc821_envelopes=yes
+# -o smtp_tls_security_level=none
+# -o smtpd_tls_security_level=none
+# -o smtpd_restriction_classes=
+# -o smtpd_delay_reject=no
+# -o smtpd_client_restrictions=permit_mynetworks,reject
+# -o smtpd_helo_restrictions=
+# -o smtpd_sender_restrictions=
+# -o smtpd_recipient_restrictions=permit_mynetworks,reject
+# -o smtpd_end_of_data_restrictions=
+# -o smtpd_error_sleep_time=0
+# -o smtpd_soft_error_limit=1001
+# -o smtpd_hard_error_limit=1000
+# -o smtpd_client_connection_count_limit=0
+# -o smtpd_client_connection_rate_limit=0
+# -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_address_mappings
+
+# smtp port used by mlmmj to re-inject scanned email back to Postfix, with
+# address mapping support
+#127.0.0.1:10028 inet n - n - - smtpd
+# -o syslog_name=postfix/10028
+# -o content_filter=
+# -o mynetworks_style=host
+# -o mynetworks=127.0.0.0/8
+# -o local_recipient_maps=
+# -o relay_recipient_maps=
+# -o strict_rfc821_envelopes=yes
+# -o smtp_tls_security_level=none
+# -o smtpd_tls_security_level=none
+# -o smtpd_restriction_classes=
+# -o smtpd_delay_reject=no
+# -o smtpd_client_restrictions=permit_mynetworks,reject
+# -o smtpd_helo_restrictions=
+# -o smtpd_sender_restrictions=
+# -o smtpd_recipient_restrictions=permit_mynetworks,reject
+# -o smtpd_end_of_data_restrictions=
+# -o smtpd_error_sleep_time=0
+# -o smtpd_soft_error_limit=1001
+# -o smtpd_hard_error_limit=1000
+# -o smtpd_client_connection_count_limit=0
+# -o smtpd_client_connection_rate_limit=0
+# -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks
+
--- /dev/null
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master" or
+# on-line: http://www.postfix.org/master.5.html).
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (no) (never) (100)
+# ==========================================================================
+smtp inet n - y - - smtpd
+#smtp inet n - y - 1 postscreen
+#smtpd pass - - y - - smtpd
+#dnsblog unix - - y - 0 dnsblog
+#tlsproxy unix - - y - 0 tlsproxy
+# Choose one: enable submission for loopback clients only, or for any client.
+#127.0.0.1:submission inet n - y - - smtpd
+#submission inet n - y - - smtpd
+# -o syslog_name=postfix/submission
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_tls_auth_only=yes
+# -o smtpd_reject_unlisted_recipient=no
+# Instead of specifying complex smtpd_<xxx>_restrictions here,
+# specify "smtpd_<xxx>_restrictions=$mua_<xxx>_restrictions"
+# here, and specify mua_<xxx>_restrictions in main.cf (where
+# "<xxx>" is "client", "helo", "sender", "relay", or "recipient").
+# -o smtpd_client_restrictions=
+# -o smtpd_helo_restrictions=
+# -o smtpd_sender_restrictions=
+# -o smtpd_relay_restrictions=
+# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+# Choose one: enable submissions for loopback clients only, or for any client.
+#127.0.0.1:submissions inet n - y - - smtpd
+#submissions inet n - y - - smtpd
+# -o syslog_name=postfix/submissions
+# -o smtpd_tls_wrappermode=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_reject_unlisted_recipient=no
+# Instead of specifying complex smtpd_<xxx>_restrictions here,
+# specify "smtpd_<xxx>_restrictions=$mua_<xxx>_restrictions"
+# here, and specify mua_<xxx>_restrictions in main.cf (where
+# "<xxx>" is "client", "helo", "sender", "relay", or "recipient").
+# -o smtpd_client_restrictions=
+# -o smtpd_helo_restrictions=
+# -o smtpd_sender_restrictions=
+# -o smtpd_relay_restrictions=
+# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#628 inet n - y - - qmqpd
+pickup unix n - y 60 1 pickup
+cleanup unix n - y - 0 cleanup
+qmgr unix n - n 300 1 qmgr
+#qmgr unix n - n 300 1 oqmgr
+tlsmgr unix - - y 1000? 1 tlsmgr
+rewrite unix - - y - - trivial-rewrite
+bounce unix - - y - 0 bounce
+defer unix - - y - 0 bounce
+trace unix - - y - 0 bounce
+verify unix - - y - 1 verify
+flush unix n - y 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - y - - smtp
+relay unix - - y - - smtp
+ -o syslog_name=postfix/$service_name
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - y - - showq
+error unix - - y - - error
+retry unix - - y - - error
+discard unix - - y - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - y - - lmtp
+anvil unix - - y - 1 anvil
+scache unix - - y - 1 scache
+postlog unix-dgram n - n - 1 postlogd
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+maildrop unix - n n - - pipe
+ flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+uucp unix - n n - - pipe
+ flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# Other external delivery methods.
+#
+ifmail unix - n n - - pipe
+ flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+bsmtp unix - n n - - pipe
+ flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
+scalemail-backend unix - n n - 2 pipe
+ flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
+mailman unix - n n - - pipe
+ flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}
projects / config / dev-mail-fbrehm / etc.git / commitdiff