--- /dev/null
+# This is an example simulation setup for ipmi_sim. It creates a single
+# management controller as a BMC. That will have the standard watchdog
+# sensor and we add a temperature sensor.
+
+# The BMC is the MC at address 20
+mc_setbmc 0x20
+
+# Now add the BMC
+mc_add 0x20 0 no-device-sdrs 0x23 9 8 0x9f 0x1291 0xf02 persist_sdr
+sel_enable 0x20 1000 0x0a
+
+# Watchdog sensor. This must be sensor zero.
+sensor_add 0x20 0 0 35 0x6f event-only
+sensor_set_event_support 0x20 0 0 enable scanning per-state \
+ 000000000001111 000000000000000 \
+ 000000000001111 000000000000000
+
+# Add a temperature sensor and its SDR. Note that sensor 0 is already
+# taken as the watchdog sensor.
+sensor_add 0x20 0 1 0x01 0x01
+# Start with the value set to 0x60
+sensor_set_value 0x20 0 1 0x60 0
+# Set just the upper thresholds with the values 0x70, 0x90, and 0xa0
+sensor_set_threshold 0x20 0 1 settable 111000 0xa0 0x90 0x70 00 00 00
+# Enable all upper threshold events events
+sensor_set_event_support 0x20 0 1 enable scanning per-state \
+ 000111111000000 000111111000000 \
+ 000111111000000 000111111000000
+
+# Add a satellite MC
+mc_add 0x30 2 no-device-sdrs 0x98 0x10 1 0x20 0x1291 0xf03
+
+sensor_add 0x30 0 1 0x01 0x01 poll 1000 file "/tmp/file1.ipm"
+sensor_set_threshold 0x30 0 1 settable 111000 0xa0 0x90 0x70 00 00 00
+sensor_set_event_support 0x30 0 1 enable scanning per-state \
+ 000111111000000 000111111000000 \
+ 000111111000000 000111111000000
+
+mc_enable 0x30
+
+# Turn on the BMC
+mc_enable 0x20
--- /dev/null
+# lan.conf
+# A configuration file for lanserv or ipmi_sim to configure the various
+# communication parameters for the device.
+
+# This is a name used to identify this instance, and used to create
+# the default name of the emulator startup command file and eventually
+# the storage facility for permanent storage.
+name "ipmisim1"
+
+#
+# Work on the BMC first
+set_working_mc 0x20
+
+ # Define a LAN channel on channel 1
+ startlan 1
+ # Define an IP address and port to listen on. You can define more
+ # than one address/port to listen on multiple addresses. The ::
+ # listens on all addresses.
+ addr localhost 9001
+ #addr 192.168.27.126 9000
+ #addr 192.168.27.200 9000
+
+ # Maximum privilege limit on the channel.
+ priv_limit admin
+
+ # Allowed IPMI 1.5 authorization types
+ allowed_auths_callback none md2 md5 straight
+ allowed_auths_user none md2 md5 straight
+ allowed_auths_operator none md2 md5 straight
+ allowed_auths_admin none md2 md5 straight
+
+ # guid for IPMI 2.0 authorization You can also use a string
+ guid a123456789abcdefa123456789abcdef
+ #guid "I_AM_A_REAL_BMC!"
+
+ # You can specify a BMC key for IPMI 2.0 authorization. See the
+ # spec for details.
+ #bmc_key "abcdefghijklmnopqrst"
+
+ # A program to get and set the LAN configuration of the interface.
+ #lan_config_program "/usr/local/bin/ipmi_sim_lancontrol eth0"
+ lan_config_program "./ipmi_sim_lancontrol eth1"
+ endlan
+
+ #chassis_control "./ipmi_sim_chassiscontrol 0x20"
+
+ # Define a serial VM inteface for channel 15 (the system interface) on
+ # port 9002, just available to the local system (localhost).
+ serial 15 localhost 9002 codec VM
+
+ # startcmd is what to execute to start a VM associated with the
+ # codec above (localhost 9002). It also starts a console serial port
+ # on port 9003 that is also used as the monitor interface.
+ startcmd "/home/cminyard/git/qemu/O/x86_64-softmmu/qemu-system-x86_64 --enable-kvm -drive file=/work/cge7/build.x86-generic-64/tmp/deploy/images/complete-image.ext2,format=raw -nographic -kernel ~/git/linux-ipmi/Ox86_64/arch/x86/boot/bzImage -append 'root=/dev/sda console=ttyS0,115200' -net nic,model=e1000,macaddr=52:54:00:12:34:59 -net user,hostfwd=tcp::5556-10.0.2.15:22 -chardev socket,id=ipmi0,host=localhost,port=9011,reconnect=10 -device ipmi-bmc-extern,id=bmc0,chardev=ipmi0 -device isa-ipmi-bt,bmc=bmc0 -serial mon:telnet::9012,server,telnet,nowait"
+
+ sol "telnet:localhost:9012" 115200
+
+ # Start startcmd at startup? Default is false.
+ startnow false
+
+ # The amount of time to wait for the startcmd to do a graceful shutdown
+ # on a powerdown request. The simulator will send a request to the
+ # target, wait this amount of time, and then do a SIGTERM kill on the
+ # process. If this is zero, a SIGTERM will not be done (nor will a SIGKILL).
+ # Note that if the simulator does not have a connection to the VM, the
+ # graceful shutdown is skipped and a SIGTERM is done immediately.
+ # Default time is 60 seconds.
+ #poweroff_wait 30
+
+ # The amount of time to wait for SIGTERM to kill the process. If the process
+ # does not terminate in this period of time, send a SIGKILL kill. If this
+ # is zero, don't send the SIGKILL. Default time is 20 seconds.
+ #kill_wait 5
+
+ # Now add some users. User 0 is invalid, user 1 is the special "anonymous"
+ # user and cannot take a username. Note that the users here are only
+ # used if the persistent user config doesn't exist.
+ # # valid name passw priv-lim max-sess allowed-auths
+ user 1 true "" "test" user 10 none md2 md5 straight
+ user 2 true "ipmiusr" "test" admin 10 none md2 md5 straight
+
+# sol "/dev/ttyUSB0" 38400 history=4000 historyfru=10
+
+#
+# Switch to a new MC
+#
+set_working_mc 0x30
+
+ # Add a SOL config, a device and a default baud rate.
+ # "history" sets a history buffer size. This means that DCD and CTS will
+ # always be enabled to the device, and we will constantly collect
+ # history for the device. It will be available as SOL instance 2
+ # on the device. If the optional backupfile option is specified,
+ # the history data is stored in the given file if the BMC shuts down
+ # (or is killed by a catchable signal) and restored from that file if it
+ # starts up.
+ # If historyfru=N is specified, then FRU device N on the MC will be
+ # able to fetch the contents of the history buffer, too, up to
+ # 65535 bytes (the max size of FRU data).
+ # Specifying nortscts disabled rtscts on the port. It will still change
+ # the RTS output line, but it won't listen to CTS.
+ # Normally the data is left in the history buffer when read. If
+ # you want the history data to be cleared from the buffer on read
+ # add readclear.
+ #sol "/dev/ttyUSB0" 19200 nortscts readclear
+# sol "/dev/ttyUSB0" 38400 history=4000,backupfile=/var/ipmi_sim/solhist1 historyfru=10
+
+ # Define a serial VM inteface for channel 15 (the system interface) on
+ # port 9003 for the MC at 0x30
+ serial 15 localhost 9011 codec VM
+
+ startcmd "$HOME/git/qemu-kvm/x86_64-softmmu/qemu-system-x86_64 --enable-kvm -drive file=$HOME/KVM/Test4sda -nographic -net nic,model=e1000,macaddr=52:54:00:12:34:59 -net user,hostfwd=tcp::5556-10.0.2.15:22 -chardev socket,id=ipmi0,host=localhost,port=9011,reconnect=10 -device isa-ipmi,chardev=ipmi0,interface=bt,irq=5 -serial mon:tcp::9012,server,telnet,nowait"
+
+ # Start startcmd at startup? Default is false.
+ startnow false
+
+# Allow a console connection to perform emulation commands.
+#console localhost 9000
+
+# Dynamically load a module to extend the simulator. After the module is
+# loaded, if the function "ipmi_sim_module_init" is defined in the module,
+# it will be called with the following parameters:
+# int ipmi_sim_module_init(sys_data_t *sys, char *initstr);
+# where initstr is the init string passed on the module load line.
+# It should return 0 on success or an errno no failure.
+#loadlib "/opt/lib/ipmi_sim_extend.so" "Initialization String"
projects / config / helga / etc.git / commitdiff