mkdir -p './initramfs-tools/scripts/panic'
mkdir -p './insserv/overrides'
mkdir -p './kernel/install.d'
-mkdir -p './logwatch/conf/logfiles'
-mkdir -p './logwatch/conf/services'
mkdir -p './logwatch/scripts/services'
mkdir -p './modprobe.d'
mkdir -p './network/if-pre-up.d'
maybe chmod 0755 'logwatch'
maybe chmod 0755 'logwatch/conf'
maybe chmod 0755 'logwatch/conf/logfiles'
+maybe chmod 0644 'logwatch/conf/logfiles/cron.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/daemon.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/fail2ban.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/iptables.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/maillog.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/named.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/secure.conf'
+maybe chmod 0644 'logwatch/conf/logfiles/syslog.conf'
+maybe chmod 0644 'logwatch/conf/logwatch.conf'
maybe chmod 0755 'logwatch/conf/services'
+maybe chmod 0644 'logwatch/conf/services/iptables.conf'
+maybe chmod 0644 'logwatch/conf/services/named.conf'
maybe chmod 0755 'logwatch/scripts'
maybe chmod 0755 'logwatch/scripts/services'
maybe chmod 0644 'ltrace.conf'
--- /dev/null
+##########################################################################
+# $Id: cron.conf 149 2013-06-18 22:18:12Z mtremaine $
+##########################################################################
+
+# What actual file? Defaults to LogPath if not absolute path....
+#Solaris is /var/cron/log -mgt
+LogFile = syslog.d/cron.log
+LogFile = syslog.d/.old/cron.log-*[0-9]
+
+# If the archives are searched, here is one or more line
+# (optionally containing wildcards) that tell where they are...
+Archive = syslog.d/.old/cron.*.gz
+Archive = syslog.d/.old/cron-*.gz
+
+# Expand the repeats (actually just removes them now)
+*ExpandRepeats
+
+# Keep only the lines in the proper date range...
+*ApplyStdDate
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+###########################################################################
+# $Id: daemon.conf 149 2013-06-18 22:18:12Z mtremaine $
+###########################################################################
+
+# daemon log file for debian-based systems
+
+LogFile = syslog.d/daemon.log
+LogFile = syslog.d/.old/daemon.log-*[0-9]
+Archive = syslog.d/.old/daemon.log.*.gz
+Archive = syslog.d/.old/daemon.log-*.gz
+
+*ExpandRepeats
+*ApplyStdDate
+
+###########################################################################
+# Please send all comments, suggestions, bug reports,
+# etc, to logwatch-devel@lists.sourceforge.net
+###########################################################################
--- /dev/null
+###########################################################################
+# $Id: fail2ban.conf 149 2013-06-18 22:18:12Z mtremaine $
+###########################################################################
+# $Log: fail2ban.conf,v $
+# Revision 1.2 2006/12/15 04:53:39 bjorn
+# Now using ApplyEuroDate, by Willi Mann.
+#
+# Revision 1.1 2006/05/30 19:04:26 bjorn
+# Added fail2ban service, written by Yaroslav Halchenko.
+#
+###########################################################################
+
+# You can put comments anywhere you want to. They are effective for the
+# rest of the line.
+
+# this is in the format of <name> = <value>. Whitespace at the beginning
+# and end of the lines is removed. Whitespace before and after the = sign
+# is removed. Everything is case *insensitive*.
+
+# Yes = True = On = 1
+# No = False = Off = 0
+
+
+*ApplyEuroDate
+
+
+LogFile = fail2ban.log
+LogFile = .old/fail2ban.log-*[0-9]
+
+Archive = .old/fail2ban.*.gz
+Archive = .old/fail2ban-*.gz
+
--- /dev/null
+##########################################################################
+# $Id$
+##########################################################################
+
+########################################################
+# This was written and is maintained by:
+# Kirk Bauer <kirk@kaybee.org>
+#
+# Please send all comments, suggestions, bug reports,
+# etc, to kirk@kaybee.org.
+########################################################
+
+# What actual file? Defaults to LogPath if not absolute path....
+LogFile = ulog/syslogemu.log
+
+# If the archives are searched, here is one or more line
+# (optionally containing wildcards) that tell where they are...
+Archive = ulog/syslogemu.log.*
+Archive = ulog/syslogemu.log-*
+
+# Keep only the lines in the proper date range...
+*ApplyStdDate
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+##########################################################################
+# $Id: maillog.conf,v 1.14 2007/10/01 16:55:18 mike Exp $
+##########################################################################
+
+# What actual file? Defaults to LogPath if not absolute path....
+LogFile = syslog.d/mail.log
+LogFile = syslog.d/.old/mail.log-*[0-9]
+
+
+# If the archives are searched, here is one or more line
+# (optionally containing wildcards) that tell where they are...
+#If you use a "-" in naming add that as well -mgt
+Archive = syslog.d/.old/mail.*.gz
+Archive = syslog.d/.old/mail-*.gz
+
+
+# Expand the repeats (actually just removes them now)
+*ExpandRepeats
+
+# Keep only the lines in the proper date range...
+*ApplyStdDate
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+##########################################################################
+# $Id$
+##########################################################################
+
+########################################################
+# This was written and is maintained by:
+# Frank Brehm <frank@brehm-online.com>
+########################################################
+
+# What actual file? Defaults to LogPath if not absolute path....
+LogFile = bind/named.log
+LogFile = bind/security.log
+
+# If the archives are searched, here is one or more line
+# (optionally containing wildcards) that tell where they are...
+Archive = bind/named.log.*
+Archive = bind/named.log-*
+Archive = bind/.old/named.log.*
+Archive = bind/.old/named.log-*
+
+# Keep only the lines in the proper date range...
+*ApplyBindDate
+
+# vi: filetype=conf shiftwidth=3 tabstop=3 et
--- /dev/null
+##########################################################################
+# $Id: secure.conf 149 2013-06-18 22:18:12Z mtremaine $
+##########################################################################
+
+# What actual file? Defaults to LogPath if not absolute path....
+LogFile = syslog.d/auth.log
+LogFile = syslog.d/authpriv.log
+LogFile = syslog.d/.old/auth.log-*[0-9]
+LogFile = syslog.d/.old/authpriv.log-*[0-9]
+
+# If the archives are searched, here is one or more line
+# (optionally containing wildcards) that tell where they are...
+#If you use a "-" in naming add that as well -mgt
+Archive = syslog.d/.old/auth.*.gz
+Archive = syslog.d/.old/auth-*.gz
+Archive = syslog.d/.old/authpriv.*.gz
+Archive = syslog.d/.old/authpriv-*.gz
+
+
+# Expand the repeats (actually just removes them now)
+*ExpandRepeats
+
+# Keep only the lines in the proper date range...
+*ApplyStdDate
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+###########################################################################
+# $Id: syslog.conf 149 2013-06-18 22:18:12Z mtremaine $
+###########################################################################
+
+# Syslog file for debian-based systems
+
+Logfile =
+Archive =
+LogFile = syslog
+LogFile = .old/syslog-*[0-9]
+Archive = .old/syslog.*.gz
+Archive = .old/syslog-*.gz
+*ExpandRepeats
+#Comma separated list works best -mgt
+*RemoveService = talkd,telnetd,inetd,nfsd,/sbin/mingetty
+*applystddate
+# *ApplyStdDate
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+# Local configuration options go here (defaults are in /usr/share/logwatch/default.conf/logwatch.conf)
+
+#Output/Format Options
+#By default Logwatch will print to stdout in text with no encoding.
+#To make email Default set Output = mail to save to file set Output = file
+Output = stdout
+#To make Html the default formatting Format = html
+Format = text
+#To make Base64 [aka uuencode] Encode = base64
+Encode = none
+
+# Default person to mail reports to. Can be a local account or a
+# complete email address. Variable Output should be set to mail, or
+# --output mail should be passed on command line to enable mail feature.
+MailTo = frank@brehm-online.com
+
+
+# The default detail level for the report.
+# This can either be Low, Med, High or a number.
+# Low = 0
+# Med = 5
+# High = 10
+Detail = High
+
--- /dev/null
+###########################################################################
+# $Id$
+###########################################################################
+
+# You can put comments anywhere you want to. They are effective for the
+# rest of the line.
+
+# this is in the format of <name> = <value>. Whitespace at the beginning
+# and end of the lines is removed. Whitespace before and after the = sign
+# is removed. Everything is case *insensitive*.
+
+# Yes = True = On = 1
+# No = False = Off = 0
+
+Title = "iptables firewall"
+
+# Which logfile group...
+#LogFile = messages
+LogFile = iptables
+
+# Set this to yes to lookup IPs in kernel firewall report
+$iptables_ip_lookup = Yes
+
+# Set this to enable a filter on iptables/ipchains displays
+# This will block out hosts who have less than the specified
+# number of hits between all ports. Defaults to 0.
+$iptables_host_min_count = 0
+
+# If both of the following settings are enabled, two output lists
+# will be produced. If none is set, the old style output is prduced.
+# Set this to generate old style output (sorted by source hosts)
+#$iptables_list_by_host = 0
+# Set this to generate new style output (sorted by targeted service)
+$iptables_list_by_service = 1
+
+########################################################
+# Please send all comments, suggestions, bug reports,
+# etc, to logwatch-devel@lists.sourceforge.net
+########################################################
+
+# vi: shiftwidth=3 tabstop=3 et
--- /dev/null
+###########################################################################
+# $Id$
+###########################################################################
+
+# You can put comments anywhere you want to. They are effective for the
+# rest of the line.
+
+# this is in the format of <name> = <value>. Whitespace at the beginning
+# and end of the lines is removed. Whitespace before and after the = sign
+# is removed. Everything is case *insensitive*.
+
+# Yes = True = On = 1
+# No = False = Off = 0
+
+Title = "Named"
+
+# Which logfile group...
+#LogFile = messages
+LogFile = named
+
+# Whether or not to lookup the IPs into hostnames...
+# Setting this to Yes will significantly increase runtime
+$named_ip_lookup = No
+
+# Only give lines pertaining to the named service...
+#*OnlyService = named
+*RemoveHeaders
+
+########################################################
+# This was written and is maintained by:
+# Kirk Bauer <kirk@kaybee.org>
+#
+# Please send all comments, suggestions, bug reports,
+# etc, to kirk@kaybee.org.
+########################################################
+
+# vi: filetype=conf shiftwidth=3 tabstop=3 et
projects / config / ns1 / etc.git / commitdiff