#pki_dir: /etc/salt/pki/master
# Directory to store job and cache data:
+# This directory may contain sensitive data and should be protected accordingly.
+#
#cachedir: /var/cache/salt/master
# Directory for custom modules. This directory can contain subdirectories for
#file_roots:
# base:
# - /srv/salt
+#
+
+# When using multiple environments, each with their own top file, the
+# default behaviour is an unordered merge. To prevent top files from
+# being merged together and instead to only use the top file from the
+# requested environment, set this value to 'same'.
+#top_file_merging_strategy: merge
+
+# To specify the order in which environments are merged, set the ordering
+# in the env_order option. Given a conflict, the last matching value will
+# win.
+#env_order: ['base', 'dev', 'prod']
+
+# If top_file_merging_strategy is set to 'same' and an environment does not
+# contain a top file, the top file in the environment specified by default_top
+# will be used instead.
+#default_top: base
# The hash_type is the hash to use when discovering the hash of a file on
# the master server. The default is md5, but sha1, sha224, sha256, sha384
# master config file that can then be used on minions.
#pillar_opts: False
-# The pillar_safe_render_error option prevents the master from passing piller
+# The pillar_safe_render_error option prevents the master from passing pillar
# render errors to the minion. This is set on by default because the error could
# contain templating data which would give that minion information it shouldn't
# have, like a password! When set true the error message will only show:
##### Syndic settings #####
##########################################
# The Salt syndic is used to pass commands through a master from a higher
-# master. Using the syndic is simple, if this is a master that will have
-# syndic servers(s) below it set the "order_masters" setting to True, if this
-# is a master that will be running a syndic daemon for passthrough the
-# "syndic_master" setting needs to be set to the location of the master server
+# master. Using the syndic is simple. If this is a master that will have
+# syndic servers(s) below it, then set the "order_masters" setting to True.
+#
+# If this is a master that will be running a syndic daemon for passthrough, then
+# the "syndic_master" setting needs to be set to the location of the master server
# to receive commands from.
# Set the order_masters setting to True if this master will command lower
#
#
##### Mine settings #####
-##########################################
+#####################################
# Restrict mine.get access from minions. By default any minion has a full access
# to get all mine data from master cache. In acl definion below, only pcre matches
# are allowed.
# The level of messages to send to the console.
# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
+#
+# The following log levels are considered INSECURE and may log sensitive data:
+# ['garbage', 'trace', 'debug']
+#
#log_level: warning
# The level of messages to send to the log file.
# The format of the console logging messages. Allowed formatting options can
# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
+#
+# Console log colors are specified by these additional formatters:
+#
+# %(colorlevel)s
+# %(colorname)s
+# %(colorprocess)s
+# %(colormsg)s
+#
+# Since it is desirable to include the surrounding brackets, '[' and ']', in
+# the coloring of the messages, these color formatters also include padding as
+# well. Color LogRecord attributes are only available for console logging.
+#
+#log_fmt_console: '%(colorlevel)s %(colormsg)s'
#log_fmt_console: '[%(levelname)-8s] %(message)s'
+#
#log_fmt_logfile: '%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s'
# This can be used to control logging levels more specificically. This
#log_granular_levels: {}
-##### Node Groups #####
+##### Node Groups ######
##########################################
# Node groups allow for logical groupings of minion nodes. A group consists of a group
# name and a compound target.
#range_server: range:80
-##### Windows Software Repo settings #####
-##############################################
+##### Windows Software Repo settings #####
+###########################################
+# Location of the repo on the master:
+#winrepo_dir_ng: '/srv/salt/win/repo-ng'
+#
+# List of git repositories to include with the local repo:
+#winrepo_remotes_ng:
+# - 'https://github.com/saltstack/salt-winrepo-ng.git'
+
+
+##### Windows Software Repo settings - Pre 2015.8 #####
+########################################################
+# Legacy repo settings for pre-2015.8 Windows minions.
+#
# Location of the repo on the master:
-#win_repo: '/srv/salt/win/repo'
+#winrepo_dir: '/srv/salt/win/repo'
#
# Location of the master's repo cache file:
-#win_repo_mastercachefile: '/srv/salt/win/repo/winrepo.p'
+#winrepo_mastercachefile: '/srv/salt/win/repo/winrepo.p'
#
# List of git repositories to include with the local repo:
-#win_gitrepos:
+#winrepo_remotes:
# - 'https://github.com/saltstack/salt-winrepo.git'
+
##### Returner settings ######
############################################
# Which returner(s) will be used for minion's result:
--- /dev/null
+##### Primary configuration settings #####
+##########################################
+# This configuration file is used to manage the behavior of all Salt Proxy
+# Minions on this host.
+# With the exception of the location of the Salt Master Server, values that are
+# commented out but have an empty line after the comment are defaults that need
+# not be set in the config. If there is no blank line after the comment, the
+# value is presented as an example and is not the default.
+
+# Per default the minion will automatically include all config files
+# from minion.d/*.conf (minion.d is a directory in the same directory
+# as the main minion config file).
+#default_include: minion.d/*.conf
+
+# Backwards compatibility option for proxymodules created before 2015.8.2
+# This setting will default to 'False' in the Boron release
+# Setting this to True adds proxymodules to the __opts__ dictionary.
+# This breaks several Salt features (basically anything that serializes
+# __opts__ over the wire) but retains backwards compatibility.
+#add_proxymodule_to_opts: True
+
+# Set the location of the salt master server. If the master server cannot be
+# resolved, then the minion will fail to start.
+#master: salt
+
+# If multiple masters are specified in the 'master' setting, the default behavior
+# is to always try to connect to them in the order they are listed. If random_master is
+# set to True, the order will be randomized instead. This can be helpful in distributing
+# the load of many minions executing salt-call requests, for example, from a cron job.
+# If only one master is listed, this setting is ignored and a warning will be logged.
+#random_master: False
+
+# Minions can connect to multiple masters simultaneously (all masters
+# are "hot"), or can be configured to failover if a master becomes
+# unavailable. Multiple hot masters are configured by setting this
+# value to "str". Failover masters can be requested by setting
+# to "failover". MAKE SURE TO SET master_alive_interval if you are
+# using failover.
+# master_type: str
+
+# Poll interval in seconds for checking if the master is still there. Only
+# respected if master_type above is "failover".
+# master_alive_interval: 30
+
+# Set whether the minion should connect to the master via IPv6:
+#ipv6: False
+
+# Set the number of seconds to wait before attempting to resolve
+# the master hostname if name resolution fails. Defaults to 30 seconds.
+# Set to zero if the minion should shutdown and not retry.
+# retry_dns: 30
+
+# Set the port used by the master reply and authentication server.
+#master_port: 4506
+
+# The user to run salt.
+#user: root
+
+# Setting sudo_user will cause salt to run all execution modules under an sudo
+# to the user given in sudo_user. The user under which the salt minion process
+# itself runs will still be that provided in the user config above, but all
+# execution modules run by the minion will be rerouted through sudo.
+#sudo_user: saltdev
+
+# Specify the location of the daemon process ID file.
+#pidfile: /var/run/salt-minion.pid
+
+# The root directory prepended to these options: pki_dir, cachedir, log_file,
+# sock_dir, pidfile.
+#root_dir: /
+
+# The directory to store the pki information in
+#pki_dir: /etc/salt/pki/minion
+
+# Where cache data goes.
+# This data may contain sensitive data and should be protected accordingly.
+#cachedir: /var/cache/salt/minion
+
+# Verify and set permissions on configuration directories at startup.
+#verify_env: True
+
+# The minion can locally cache the return data from jobs sent to it, this
+# can be a good way to keep track of jobs the minion has executed
+# (on the minion side). By default this feature is disabled, to enable, set
+# cache_jobs to True.
+#cache_jobs: False
+
+# Set the directory used to hold unix sockets.
+#sock_dir: /var/run/salt/minion
+
+# Set the default outputter used by the salt-call command. The default is
+# "nested".
+#output: nested
+#
+# By default output is colored. To disable colored output, set the color value
+# to False.
+#color: True
+
+# Do not strip off the colored output from nested results and state outputs
+# (true by default).
+# strip_colors: False
+
+# Backup files that are replaced by file.managed and file.recurse under
+# 'cachedir'/file_backups relative to their original location and appended
+# with a timestamp. The only valid setting is "minion". Disabled by default.
+#
+# Alternatively this can be specified for each file in state files:
+# /etc/ssh/sshd_config:
+# file.managed:
+# - source: salt://ssh/sshd_config
+# - backup: minion
+#
+#backup_mode: minion
+
+# When waiting for a master to accept the minion's public key, salt will
+# continuously attempt to reconnect until successful. This is the time, in
+# seconds, between those reconnection attempts.
+#acceptance_wait_time: 10
+
+# If this is nonzero, the time between reconnection attempts will increase by
+# acceptance_wait_time seconds per iteration, up to this maximum. If this is
+# set to zero, the time between reconnection attempts will stay constant.
+#acceptance_wait_time_max: 0
+
+# If the master rejects the minion's public key, retry instead of exiting.
+# Rejected keys will be handled the same as waiting on acceptance.
+#rejected_retry: False
+
+# When the master key changes, the minion will try to re-auth itself to receive
+# the new master key. In larger environments this can cause a SYN flood on the
+# master because all minions try to re-auth immediately. To prevent this and
+# have a minion wait for a random amount of time, use this optional parameter.
+# The wait-time will be a random number of seconds between 0 and the defined value.
+#random_reauth_delay: 60
+
+# When waiting for a master to accept the minion's public key, salt will
+# continuously attempt to reconnect until successful. This is the timeout value,
+# in seconds, for each individual attempt. After this timeout expires, the minion
+# will wait for acceptance_wait_time seconds before trying again. Unless your master
+# is under unusually heavy load, this should be left at the default.
+#auth_timeout: 60
+
+# Number of consecutive SaltReqTimeoutError that are acceptable when trying to
+# authenticate.
+#auth_tries: 7
+
+# If authentication fails due to SaltReqTimeoutError during a ping_interval,
+# cause sub minion process to restart.
+#auth_safemode: False
+
+# Ping Master to ensure connection is alive (minutes).
+#ping_interval: 0
+
+# To auto recover minions if master changes IP address (DDNS)
+# auth_tries: 10
+# auth_safemode: False
+# ping_interval: 90
+#
+# Minions won't know master is missing until a ping fails. After the ping fail,
+# the minion will attempt authentication and likely fails out and cause a restart.
+# When the minion restarts it will resolve the masters IP and attempt to reconnect.
+
+# If you don't have any problems with syn-floods, don't bother with the
+# three recon_* settings described below, just leave the defaults!
+#
+# The ZeroMQ pull-socket that binds to the masters publishing interface tries
+# to reconnect immediately, if the socket is disconnected (for example if
+# the master processes are restarted). In large setups this will have all
+# minions reconnect immediately which might flood the master (the ZeroMQ-default
+# is usually a 100ms delay). To prevent this, these three recon_* settings
+# can be used.
+# recon_default: the interval in milliseconds that the socket should wait before
+# trying to reconnect to the master (1000ms = 1 second)
+#
+# recon_max: the maximum time a socket should wait. each interval the time to wait
+# is calculated by doubling the previous time. if recon_max is reached,
+# it starts again at recon_default. Short example:
+#
+# reconnect 1: the socket will wait 'recon_default' milliseconds
+# reconnect 2: 'recon_default' * 2
+# reconnect 3: ('recon_default' * 2) * 2
+# reconnect 4: value from previous interval * 2
+# reconnect 5: value from previous interval * 2
+# reconnect x: if value >= recon_max, it starts again with recon_default
+#
+# recon_randomize: generate a random wait time on minion start. The wait time will
+# be a random value between recon_default and recon_default +
+# recon_max. Having all minions reconnect with the same recon_default
+# and recon_max value kind of defeats the purpose of being able to
+# change these settings. If all minions have the same values and your
+# setup is quite large (several thousand minions), they will still
+# flood the master. The desired behavior is to have timeframe within
+# all minions try to reconnect.
+#
+# Example on how to use these settings. The goal: have all minions reconnect within a
+# 60 second timeframe on a disconnect.
+# recon_default: 1000
+# recon_max: 59000
+# recon_randomize: True
+#
+# Each minion will have a randomized reconnect value between 'recon_default'
+# and 'recon_default + recon_max', which in this example means between 1000ms
+# 60000ms (or between 1 and 60 seconds). The generated random-value will be
+# doubled after each attempt to reconnect. Lets say the generated random
+# value is 11 seconds (or 11000ms).
+# reconnect 1: wait 11 seconds
+# reconnect 2: wait 22 seconds
+# reconnect 3: wait 33 seconds
+# reconnect 4: wait 44 seconds
+# reconnect 5: wait 55 seconds
+# reconnect 6: wait time is bigger than 60 seconds (recon_default + recon_max)
+# reconnect 7: wait 11 seconds
+# reconnect 8: wait 22 seconds
+# reconnect 9: wait 33 seconds
+# reconnect x: etc.
+#
+# In a setup with ~6000 thousand hosts these settings would average the reconnects
+# to about 100 per second and all hosts would be reconnected within 60 seconds.
+# recon_default: 100
+# recon_max: 5000
+# recon_randomize: False
+#
+#
+# The loop_interval sets how long in seconds the minion will wait between
+# evaluating the scheduler and running cleanup tasks. This defaults to a
+# sane 60 seconds, but if the minion scheduler needs to be evaluated more
+# often lower this value
+#loop_interval: 60
+
+# The grains_refresh_every setting allows for a minion to periodically check
+# its grains to see if they have changed and, if so, to inform the master
+# of the new grains. This operation is moderately expensive, therefore
+# care should be taken not to set this value too low.
+#
+# Note: This value is expressed in __minutes__!
+#
+# A value of 10 minutes is a reasonable default.
+#
+# If the value is set to zero, this check is disabled.
+#grains_refresh_every: 1
+
+# Cache grains on the minion. Default is False.
+#grains_cache: False
+
+# Grains cache expiration, in seconds. If the cache file is older than this
+# number of seconds then the grains cache will be dumped and fully re-populated
+# with fresh data. Defaults to 5 minutes. Will have no effect if 'grains_cache'
+# is not enabled.
+# grains_cache_expiration: 300
+
+# Windows platforms lack posix IPC and must rely on slower TCP based inter-
+# process communications. Set ipc_mode to 'tcp' on such systems
+#ipc_mode: ipc
+
+# Overwrite the default tcp ports used by the minion when in tcp mode
+#tcp_pub_port: 4510
+#tcp_pull_port: 4511
+
+# Passing very large events can cause the minion to consume large amounts of
+# memory. This value tunes the maximum size of a message allowed onto the
+# minion event bus. The value is expressed in bytes.
+#max_event_size: 1048576
+
+# To detect failed master(s) and fire events on connect/disconnect, set
+# master_alive_interval to the number of seconds to poll the masters for
+# connection events.
+#
+#master_alive_interval: 30
+
+# The minion can include configuration from other files. To enable this,
+# pass a list of paths to this option. The paths can be either relative or
+# absolute; if relative, they are considered to be relative to the directory
+# the main minion configuration file lives in (this file). Paths can make use
+# of shell-style globbing. If no files are matched by a path passed to this
+# option then the minion will log a warning message.
+#
+# Include a config file from some other path:
+# include: /etc/salt/extra_config
+#
+# Include config from several files and directories:
+#include:
+# - /etc/salt/extra_config
+# - /etc/roles/webserver
+#
+#
+#
+##### Minion module management #####
+##########################################
+# Disable specific modules. This allows the admin to limit the level of
+# access the master has to the minion.
+#disable_modules: [cmd,test]
+#disable_returners: []
+#
+# Modules can be loaded from arbitrary paths. This enables the easy deployment
+# of third party modules. Modules for returners and minions can be loaded.
+# Specify a list of extra directories to search for minion modules and
+# returners. These paths must be fully qualified!
+#module_dirs: []
+#returner_dirs: []
+#states_dirs: []
+#render_dirs: []
+#utils_dirs: []
+#
+# A module provider can be statically overwritten or extended for the minion
+# via the providers option, in this case the default module will be
+# overwritten by the specified module. In this example the pkg module will
+# be provided by the yumpkg5 module instead of the system default.
+#providers:
+# pkg: yumpkg5
+#
+# Enable Cython modules searching and loading. (Default: False)
+#cython_enable: False
+#
+# Specify a max size (in bytes) for modules on import. This feature is currently
+# only supported on *nix operating systems and requires psutil.
+# modules_max_memory: -1
+
+
+##### State Management Settings #####
+###########################################
+# The state management system executes all of the state templates on the minion
+# to enable more granular control of system state management. The type of
+# template and serialization used for state management needs to be configured
+# on the minion, the default renderer is yaml_jinja. This is a yaml file
+# rendered from a jinja template, the available options are:
+# yaml_jinja
+# yaml_mako
+# yaml_wempy
+# json_jinja
+# json_mako
+# json_wempy
+#
+#renderer: yaml_jinja
+#
+# The failhard option tells the minions to stop immediately after the first
+# failure detected in the state execution. Defaults to False.
+#failhard: False
+#
+# Reload the modules prior to a highstate run.
+#autoload_dynamic_modules: True
+#
+# clean_dynamic_modules keeps the dynamic modules on the minion in sync with
+# the dynamic modules on the master, this means that if a dynamic module is
+# not on the master it will be deleted from the minion. By default, this is
+# enabled and can be disabled by changing this value to False.
+#clean_dynamic_modules: True
+#
+# Normally, the minion is not isolated to any single environment on the master
+# when running states, but the environment can be isolated on the minion side
+# by statically setting it. Remember that the recommended way to manage
+# environments is to isolate via the top file.
+#environment: None
+#
+# If using the local file directory, then the state top file name needs to be
+# defined, by default this is top.sls.
+#state_top: top.sls
+#
+# Run states when the minion daemon starts. To enable, set startup_states to:
+# 'highstate' -- Execute state.highstate
+# 'sls' -- Read in the sls_list option and execute the named sls files
+# 'top' -- Read top_file option and execute based on that file on the Master
+#startup_states: ''
+#
+# List of states to run when the minion starts up if startup_states is 'sls':
+#sls_list:
+# - edit.vim
+# - hyper
+#
+# Top file to execute if startup_states is 'top':
+#top_file: ''
+
+# Automatically aggregate all states that have support for mod_aggregate by
+# setting to True. Or pass a list of state module names to automatically
+# aggregate just those types.
+#
+# state_aggregate:
+# - pkg
+#
+#state_aggregate: False
+
+##### File Directory Settings #####
+##########################################
+# The Salt Minion can redirect all file server operations to a local directory,
+# this allows for the same state tree that is on the master to be used if
+# copied completely onto the minion. This is a literal copy of the settings on
+# the master but used to reference a local directory on the minion.
+
+# Set the file client. The client defaults to looking on the master server for
+# files, but can be directed to look at the local file directory setting
+# defined below by setting it to "local". Setting a local file_client runs the
+# minion in masterless mode.
+#file_client: remote
+
+# The file directory works on environments passed to the minion, each environment
+# can have multiple root directories, the subdirectories in the multiple file
+# roots cannot match, otherwise the downloaded files will not be able to be
+# reliably ensured. A base environment is required to house the top file.
+# Example:
+# file_roots:
+# base:
+# - /srv/salt/
+# dev:
+# - /srv/salt/dev/services
+# - /srv/salt/dev/states
+# prod:
+# - /srv/salt/prod/services
+# - /srv/salt/prod/states
+#
+#file_roots:
+# base:
+# - /srv/salt
+
+# By default, the Salt fileserver recurses fully into all defined environments
+# to attempt to find files. To limit this behavior so that the fileserver only
+# traverses directories with SLS files and special Salt directories like _modules,
+# enable the option below. This might be useful for installations where a file root
+# has a very large number of files and performance is negatively impacted. Default
+# is False.
+#fileserver_limit_traversal: False
+
+# The hash_type is the hash to use when discovering the hash of a file in
+# the local fileserver. The default is md5, but sha1, sha224, sha256, sha384
+# and sha512 are also supported.
+#
+# Warning: Prior to changing this value, the minion should be stopped and all
+# Salt caches should be cleared.
+#hash_type: md5
+
+# The Salt pillar is searched for locally if file_client is set to local. If
+# this is the case, and pillar data is defined, then the pillar_roots need to
+# also be configured on the minion:
+#pillar_roots:
+# base:
+# - /srv/pillar
+#
+#
+###### Security settings #####
+###########################################
+# Enable "open mode", this mode still maintains encryption, but turns off
+# authentication, this is only intended for highly secure environments or for
+# the situation where your keys end up in a bad state. If you run in open mode
+# you do so at your own risk!
+#open_mode: False
+
+# Enable permissive access to the salt keys. This allows you to run the
+# master or minion as root, but have a non-root group be given access to
+# your pki_dir. To make the access explicit, root must belong to the group
+# you've given access to. This is potentially quite insecure.
+#permissive_pki_access: False
+
+# The state_verbose and state_output settings can be used to change the way
+# state system data is printed to the display. By default all data is printed.
+# The state_verbose setting can be set to True or False, when set to False
+# all data that has a result of True and no changes will be suppressed.
+#state_verbose: True
+
+# The state_output setting changes if the output is the full multi line
+# output for each changed state if set to 'full', but if set to 'terse'
+# the output will be shortened to a single line.
+#state_output: full
+
+# The state_output_diff setting changes whether or not the output from
+# successful states is returned. Useful when even the terse output of these
+# states is cluttering the logs. Set it to True to ignore them.
+#state_output_diff: False
+
+# The state_output_profile setting changes whether profile information
+# will be shown for each state run.
+#state_output_profile: True
+
+# Fingerprint of the master public key to validate the identity of your Salt master
+# before the initial key exchange. The master fingerprint can be found by running
+# "salt-key -F master" on the Salt master.
+#master_finger: ''
+
+
+###### Thread settings #####
+###########################################
+# Disable multiprocessing support, by default when a minion receives a
+# publication a new process is spawned and the command is executed therein.
+#multiprocessing: True
+
+
+##### Logging settings #####
+##########################################
+# The location of the minion log file
+# The minion log can be sent to a regular file, local path name, or network
+# location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
+# ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
+# format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
+#log_file: /var/log/salt/minion
+#log_file: file:///dev/log
+#log_file: udp://loghost:10514
+#
+#log_file: /var/log/salt/minion
+#key_logfile: /var/log/salt/key
+
+# The level of messages to send to the console.
+# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
+#
+# The following log levels are considered INSECURE and may log sensitive data:
+# ['garbage', 'trace', 'debug']
+#
+# Default: 'warning'
+#log_level: warning
+
+# The level of messages to send to the log file.
+# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
+# If using 'log_granular_levels' this must be set to the highest desired level.
+# Default: 'warning'
+#log_level_logfile:
+
+# The date and time format used in log messages. Allowed date/time formating
+# can be seen here: http://docs.python.org/library/time.html#time.strftime
+#log_datefmt: '%H:%M:%S'
+#log_datefmt_logfile: '%Y-%m-%d %H:%M:%S'
+
+# The format of the console logging messages. Allowed formatting options can
+# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
+#
+# Console log colors are specified by these additional formatters:
+#
+# %(colorlevel)s
+# %(colorname)s
+# %(colorprocess)s
+# %(colormsg)s
+#
+# Since it is desirable to include the surrounding brackets, '[' and ']', in
+# the coloring of the messages, these color formatters also include padding as
+# well. Color LogRecord attributes are only available for console logging.
+#
+#log_fmt_console: '%(colorlevel)s %(colormsg)s'
+#log_fmt_console: '[%(levelname)-8s] %(message)s'
+#
+#log_fmt_logfile: '%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s'
+
+# This can be used to control logging levels more specificically. This
+# example sets the main salt library at the 'warning' level, but sets
+# 'salt.modules' to log at the 'debug' level:
+# log_granular_levels:
+# 'salt': 'warning'
+# 'salt.modules': 'debug'
+#
+#log_granular_levels: {}
+
+# To diagnose issues with minions disconnecting or missing returns, ZeroMQ
+# supports the use of monitor sockets # to log connection events. This
+# feature requires ZeroMQ 4.0 or higher.
+#
+# To enable ZeroMQ monitor sockets, set 'zmq_monitor' to 'True' and log at a
+# debug level or higher.
+#
+# A sample log event is as follows:
+#
+# [DEBUG ] ZeroMQ event: {'endpoint': 'tcp://127.0.0.1:4505', 'event': 512,
+# 'value': 27, 'description': 'EVENT_DISCONNECTED'}
+#
+# All events logged will include the string 'ZeroMQ event'. A connection event
+# should be logged on the as the minion starts up and initially connects to the
+# master. If not, check for debug log level and that the necessary version of
+# ZeroMQ is installed.
+#
+#zmq_monitor: False
+
+###### Module configuration #####
+###########################################
+# Salt allows for modules to be passed arbitrary configuration data, any data
+# passed here in valid yaml format will be passed on to the salt minion modules
+# for use. It is STRONGLY recommended that a naming convention be used in which
+# the module name is followed by a . and then the value. Also, all top level
+# data must be applied via the yaml dict construct, some examples:
+#
+# You can specify that all modules should run in test mode:
+#test: True
+#
+# A simple value for the test module:
+#test.foo: foo
+#
+# A list for the test module:
+#test.bar: [baz,quo]
+#
+# A dict for the test module:
+#test.baz: {spam: sausage, cheese: bread}
+#
+#
+###### Update settings ######
+###########################################
+# Using the features in Esky, a salt minion can both run as a frozen app and
+# be updated on the fly. These options control how the update process
+# (saltutil.update()) behaves.
+#
+# The url for finding and downloading updates. Disabled by default.
+#update_url: False
+#
+# The list of services to restart after a successful update. Empty by default.
+#update_restart_services: []
+
+
+###### Keepalive settings ######
+############################################
+# ZeroMQ now includes support for configuring SO_KEEPALIVE if supported by
+# the OS. If connections between the minion and the master pass through
+# a state tracking device such as a firewall or VPN gateway, there is
+# the risk that it could tear down the connection the master and minion
+# without informing either party that their connection has been taken away.
+# Enabling TCP Keepalives prevents this from happening.
+
+# Overall state of TCP Keepalives, enable (1 or True), disable (0 or False)
+# or leave to the OS defaults (-1), on Linux, typically disabled. Default True, enabled.
+#tcp_keepalive: True
+
+# How long before the first keepalive should be sent in seconds. Default 300
+# to send the first keepalive after 5 minutes, OS default (-1) is typically 7200 seconds
+# on Linux see /proc/sys/net/ipv4/tcp_keepalive_time.
+#tcp_keepalive_idle: 300
+
+# How many lost probes are needed to consider the connection lost. Default -1
+# to use OS defaults, typically 9 on Linux, see /proc/sys/net/ipv4/tcp_keepalive_probes.
+#tcp_keepalive_cnt: -1
+
+# How often, in seconds, to send keepalives after the first one. Default -1 to
+# use OS defaults, typically 75 seconds on Linux, see
+# /proc/sys/net/ipv4/tcp_keepalive_intvl.
+#tcp_keepalive_intvl: -1
+
+
+###### Windows Software settings ######
+############################################
+# Location of the repository cache file on the master:
+#win_repo_cachefile: 'salt://win/repo/winrepo.p'
+
+
+###### Returner settings ######
+############################################
+# Which returner(s) will be used for minion's result:
+#return: mysql
projects / config / samara / etc.git / commitdiff