+++ /dev/null
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-#
-# /etc/screenrc
-#
-# This is the system wide screenrc.
-#
-# You can use this file to change the default behavior of screen system wide
-# or copy it to ~/.screenrc and use it as a starting point for your own
-# settings.
-#
-# Commands in this file are used to set options, bind screen functions to
-# keys, redefine terminal capabilities, and to automatically establish one or
-# more windows at the beginning of your screen session.
-#
-# This is not a comprehensive list of options, look at the screen manual for
-# details on everything that you can put in this file.
-#
-#
-
-# ==============================================================================
-# SCREEN SETTINGS
-# ==============================================================================
-
-# ESCAPE - the COMMAND CHARACTER
-# ===============================================================
-# escape ^aa # default
-# escape ^^^^ # suggested binding (Control-^) for Emacs users
-
-
-# PASSWORD
-# ===============================================================
-# This commands sets the *internal* password for the screen session.
-# WARNING!! If this is set then a "lock" command will only let you in to the
-# session after you enter the user's account password and then *also*
-# the internal password for that session. This gives additional safety but,
-# if you forget the internal password then you cannot resume your session.
-# Use :password to generate a password
-# password ODSJQf.4IJN7E # "1234"
-
-
-# VARIABLES
-# ===============================================================
-# No annoying audible bell, using "visual bell"
-# vbell on # default: off
-# vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!"
-
-# Automatically detach on hangup.
- autodetach on # default: on
-
-# Don't display the copyright page
- startup_message off # default: on
-
-# Uses nethack-style messages
-# nethack on # default: off
-
-# Affects the copying of text regions
- crlf off # default: off
-
-# Enable/disable multiuser mode. Standard screen operation is singleuser.
-# In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used
-# to enable (and disable) other user accessing this screen session.
-# Requires suid-root.
- multiuser off
-
-# Change default scrollback value for new windows
- defscrollback 1000 # default: 100
-
-# Define the time that all windows monitored for silence should
-# wait before displaying a message. Default 30 seconds.
- silencewait 15 # default: 30
-
-# bufferfile: The file to use for commands
-# "readbuf" ('<') and "writebuf" ('>'):
- bufferfile $HOME/.screen_exchange
-#
-# hardcopydir: The directory which contains all hardcopies.
-# hardcopydir ~/.hardcopy
-# hardcopydir ~/.screen
-#
-# shell: Default process started in screen's windows.
-# Makes it possible to use a different shell inside screen
-# than is set as the default login shell.
-# If begins with a '-' character, the shell will be started as a login shell.
-# shell zsh
-# shell bash
-# shell ksh
- shell -$SHELL
-
-# shellaka '> |tcsh'
-# shelltitle '$ |bash'
-
-# emulate .logout message
- pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended."
-
-# caption always " %w --- %c:%s"
-# caption always "%3n %t%? @%u%?%? [%h]%?%=%c"
-
-# advertise hardstatus support to $TERMCAP
-# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\'
-
-# set every new windows hardstatus line to somenthing descriptive
-# defhstatus "screen: ^En (^Et)"
-
-# don't kill window after the process died
-# zombie "^["
-
-# ignore displays that block on output
-defnonblock on
-
-# XTERM TWEAKS
-# ===============================================================
-
-# xterm understands both im/ic and doesn't have a status line.
-# Note: Do not specify im and ic in the real termcap/info file as
-# some programs (e.g. vi) will not work anymore.
- termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
- terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
-
-# 80/132 column switching must be enabled for ^AW to work
-# change init sequence to not switch width
- termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l
-
-# Make the output buffer large for (fast) xterms.
-# termcapinfo xterm* OL=10000
- termcapinfo xterm* OL=100
-
-# tell screen that xterm can switch to dark background and has function
-# keys.
- termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l'
- termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~'
- termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~'
-
-# special xterm hardstatus: use the window title.
- termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
-
-#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l'
- termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l'
-
-# emulate part of the 'K' charset
- termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337'
-
-# xterm-52 tweaks:
-# - uses background color for delete operations
- termcapinfo xterm* be
-
-# Do not use xterm's alternative window buffer, it breaks scrollback (see bug #61195)
- termcapinfo xterm|xterms|xs ti@:te=\E[2J
-
-# WYSE TERMINALS
-# ===============================================================
-
-#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff")
-#essential to have it here, as this is a slow terminal.
- termcapinfo wy75-42 xo:hs@
-
-# New termcap sequences for cursor application mode.
- termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J
-
-
-# OTHER TERMINALS
-# ===============================================================
-
-# make hp700 termcap/info better
- termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
-
-# Extend the vt100 desciption by some sequences.
- termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC
- terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC
- termcapinfo linux C8
-# old rxvt versions also need this
-# termcapinfo rxvt C8
-
-
-# KEYBINDINGS
-# ==============================================================
-# The "bind" command assign keys to (internal) commands
-# SCREEN checks all the keys you type; you type the key
-# which is known as the "command character" then SCREEN
-# eats this key, too, and checks whether this key is
-# "bound" to a command. If so then SCREEN will execute it.
-#
-# The command "bind" allows you to chose which keys
-# will be assigned to the commands.
-#
-# Some commands are bound to several keys -
-# usually to both some letter and its corresponding
-# control key combination, eg the command
-# "(create) screen" is bound to both 'c' and '^C'.
-#
-# The following list shows the default bindings:
-#
-# break ^B b
-# clear C
-# colon :
-# copy ^[ [
-# detach ^D d
-# digraph ^V
-# displays *
-# dumptermcap .
-# fit F
-# flow ^F f
-# focus ^I
-# hardcopy h
-# help ?
-# history { }
-# info i
-# kill K k
-# lastmsg ^M m
-# license ,
-# log H
-# login L
-# meta x
-# monitor M
-# next ^@ ^N sp n
-# number N
-# only Q
-# other ^X
-# pow_break B
-# pow_detach D
-# prev ^H ^P p ^?
-# quit \
-# readbuf <
-# redisplay ^L l
-# remove X
-# removebuf =
-# reset Z
-# screen ^C c
-# select " '
-# silence _
-# split S
-# suspend ^Z z
-# time ^T t
-# title A
-# vbell ^G
-# version v
-# width W
-# windows ^W w
-# wrap ^R r
-# writebuf >
-# xoff ^S s
-# xon ^Q q
-# ^] paste .
-# - select -
-# 0 select 0
-# 1 select 1
-# 2 select 2
-# 3 select 3
-# 4 select 4
-# 5 select 5
-# 6 select 6
-# 7 select 7
-# 8 select 8
-# 9 select 9
-# I login on
-# O login off
-# ] paste .
-#
-
-# And here are the default bind commands if you need them:
-#
-# bind A title
-# bind C clear
-# bind D pow_detach
-# bind F fit
-# bind H log
-# bind I login on
-# bind K kill
-# bind L login
-# bind M monitor
-# bind N number
-# bind O login off
-# bind Q only
-# bind S split
-# bind W width
-# bind X remove
-# bind Z reset
-
-# Let's remove some dangerous key bindings ...
- bind k
- bind ^k
-# bind . dumptermcap # default
- bind .
-# bind ^\ quit # default
- bind ^\
-# bind \\ quit # default
- bind \\
-# bind ^h ??? # default
- bind ^h
-# bind h hardcopy # default
- bind h
-
-# ... and make them better.
- bind 'K' kill
- bind 'I' login on
- bind 'O' login off
- bind '}' history
-
-# Yet another hack:
-# Prepend/append register [/] to the paste if ^a^] is pressed.
-# This lets me have autoindent mode in vi.
- register [ "\033:se noai\015a"
- register ] "\033:se ai\015a"
- bind ^] paste [.]
-
-
-# hardstatus alwaysignore
-# hardstatus alwayslastline "%Lw"
-
-# Resize the current region. The space will be removed from or added to
-# the region below or if there's not enough space from the region above.
- bind = resize =
- bind + resize +3
- bind - resize -3
-# bind _ resize max
-#
-# attrcolor u "-u b"
-# attrcolor b "R"
-
-# STARTUP SCREENS
-# ===============================================================
-# Defines the time screen delays a new message when one message
-# is currently displayed. The default is 1 second.
-# msgminwait 2
-
-# Time a message is displayed if screen is not disturbed by
-# other activity. The dafault is 5 seconds:
-# msgwait 2
-
-# Briefly show the version number of this starting
-# screen session - but only for *one* second:
-# msgwait 1
-# version
-
-# Welcome the user:
-# echo "welcome :-)"
-# echo "I love you today."
-
-# Uncomment one/some following lines to automatically let
-# SCREEN start some programs in the given window numbers:
-# screen -t MAIL 0 mutt
-# screen -t EDIT 1 vim
-# screen -t GOOGLE 2 links http://www.google.com
-# screen -t NEWS 3 slrn
-# screen -t WWW 4 links http://www.math.fu-berlin.de/~guckes/
-# screen 5
-# screen 6
-
-# Set the environment variable var to value string. If only var is specified,
-# you'll be prompted to enter a value. If no parameters are specified,
-# you'll be prompted for both variable and value. The environment is
-# inherited by all subsequently forked shells.
-# setenv PROMPT_COMMAND 'echo -n -e "\033k\033\134"'
-
-# Don't you want to start programs which need a DISPLAY ?
-# setenv DISPLAY ''
mkdir -p './texmf/dvips.d'
mkdir -p './unixODBC/ODBCDataSources'
maybe chmod 0755 '.'
-maybe chmod 0644 './._cfg0000_screenrc'
maybe chmod 0700 './.etckeeper'
maybe chmod 0600 './.gitignore'
maybe chmod 0600 './.pwd.lock'
maybe chgrp users './X11/xorg.conf.d/20-evdev.conf'
maybe chmod 0644 './X11/xorg.conf.d/20-evdev.conf'
maybe chmod 0755 './abcde'
-maybe chmod 0644 './abcde/._cfg0000_abcde.conf'
maybe chmod 0644 './abcde/abcde.conf'
maybe chmod 0755 './acpi'
maybe chmod 0755 './acpi/default.sh'
maybe chmod 0755 './config-archive/etc/UPower'
maybe chmod 0644 './config-archive/etc/UPower/UPower.conf'
maybe chmod 0644 './config-archive/etc/UPower/UPower.conf.dist'
+maybe chmod 0755 './config-archive/etc/abcde'
+maybe chmod 0644 './config-archive/etc/abcde/abcde.conf'
+maybe chmod 0644 './config-archive/etc/abcde/abcde.conf.dist'
maybe chmod 0755 './config-archive/etc/apache2'
maybe chmod 0755 './config-archive/etc/apache2/modules.d'
maybe chmod 0644 './config-archive/etc/apache2/modules.d/00_apache_manual.conf'
maybe chmod 0644 './config-archive/etc/pulse/system.pa.dist'
maybe chmod 0644 './config-archive/etc/request-key.conf'
maybe chmod 0644 './config-archive/etc/request-key.conf.dist'
+maybe chmod 0644 './config-archive/etc/screenrc'
+maybe chmod 0644 './config-archive/etc/screenrc.dist.new'
maybe chmod 0755 './config-archive/etc/ssh'
maybe chmod 0644 './config-archive/etc/ssh/ssh_config'
maybe chmod 0644 './config-archive/etc/ssh/ssh_config.dist'
+++ /dev/null
-# System defaults for abcde version 2.2.x
-# Nothing in this file is uncommented by default.
-#
-# If you wish to override these system-wide settings, create your own
-# .abcde.conf file in your home directory.
-
-# CDDB options
-# Choose whether you want to use CDDB or Musicbrainz. Default is CDDB
-#CDDBMETHOD=cddb
-
-# If you wish to use a different CDDB server, edit this line.
-# If you just wanted to use a proxy server, just set your http_proxy
-# environment variable - wget will use it correctly.
-#CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
-
-# The CDDB protocol level.
-# Right now 5 is latin1 output and 6 is UTF8 encoding.
-#CDDBPROTO=6
-
-# The CDDB protocol requires hello information, including a valid username
-# and hostname. If you feel paranoid about giving away such info, edit this
-# line - the format is username@hostname.
-#HELLOINFO="`whoami`@`hostname`"
-
-# This controls the email address CDDB changes are submitted to.
-#CDDBSUBMIT=freedb-submit@freedb.org
-
-# The following options control whether or not fetched CDDB entries
-# are cached locally in $CDDBLOCALDIR
-#CDDBCOPYLOCAL="n"
-#CDDBLOCALDIR="$HOME/.cddb"
-#CDDBLOCALRECURSIVE="n"
-
-# If NOSUBMIT is set to y, then abcde will never prompt asking if you
-# wish to submit your edited cddb file.
-#NOSUBMIT=n
-
-# If NOCDDBQUERY is set to y, then abcde will never even try to access
-# the CDDB server; running abcde will automatically drop you into a
-# blank cddb file to edit at your leisure. This is the same as the
-# -n option. NOCDDBQUERY=y implies NOSUBMIT=y.
-#NOCDDBQUERY=n
-
-# Select here if you want to use the locally stored CDDB entries.
-# This is useful if you do a lot of editing to those CDDB entries.
-# Also, other tools like Grip store CDDB entries under $HOME/.cddb,
-# so they can be reused when ripping CDs.
-#CDDBUSELOCAL="n"
-
-# List, separated with a comma, the fields we want the parsing function to
-# output. Defaults to YEAR and GENRE, for a complete list of fields provided by
-# CDDB.
-# The fields are not case sensitive. Actually, "y,g" will work as fine as "Y,G"
-# or "YEAR, GENRE"
-#SHOWCDDBFIELDS=year,genre
-
-# Specify the style of encoder to use here -
-# oggenc, vorbize - for OGGENCODERSYNTAX
-# lame, gogo, bladeenc, l3enc, xingmp3enc, mp3enc - for MP3ENCODERSYNTAX
-# flac - the only supported for FLACENCODERSYNTAX at the moment
-# speexenc - the only encoder for SPEEXENCODERSYNTAX
-# mppenc - encoder for MPPENCODERSYNTAX
-# default is a valid option for oggenc, lame, flac, speexenc and mppenc.
-# Currently this affects the default location of the binary, the variable
-# to pick encoder command-line options from, and where the options are
-# given.
-#MP3ENCODERSYNTAX=default
-#OGGENCODERSYNTAX=default
-#FLACENCODERSYNTAX=default
-#SPEEXENCODERSYNTAX=default
-#MPPENCODERSYNTAX=default
-#AACENCODERSYNTAX=default
-
-# Specify the syntax of the normalize binary here - so far only 'normalize'
-# is supported.
-#NORMALIZERSYNTAX=default
-
-# CD reader program to use - currently recognized options are 'cdparanoia',
-# 'icedax', 'cdda2wav', 'dagrab', 'cddafs' (Mac OS X only) and 'flac'.
-#CDROMREADERSYNTAX=cdparanoia
-
-# CUE reader syntax for the CUE reader program to use.
-# abcde supports 2 CUE modes: 'mkcue' and 'abcde.mkcue' so you can set the
-# MKCUE variable accordingly. The 'abcde.mkcue' uses an internal
-# implementation, without the need of an external program.
-#CUEREADERSYNTAX=default
-
-# Specify the program to convert a CUE sheet back to a CD disc ID for CDDB queries.
-# Select between '/path/to/cue2discid' (provided as an example) or
-# 'abcde.cue2discid', implemented internaly.
-#CUE2DISCID=abcde.cue2discid
-
-# Keep the wav files after encoding. Set it to "y" and remove "clean" from
-# the list of default actions, since we purge the temp directory as default.
-#KEEPWAVS=n
-
-# Track padding: force abcde to pad tracks using 0, so every song uses a two
-# digit entry. If set to "y", even a single song encoding outputs a file like
-# 01.my_song.ext
-#PADTRACKS=n
-
-# Define if you want abcde to be non-interactive.
-# Keep in mind that there is no way to deactivate it right now in the command
-# line, so setting this option makes abcde to be always non-interactive.
-#INTERACTIVE=n
-
-# Specify 'nice'ness of the encoder, the CD reader and the distmp3 proc.
-# This is a relative 'nice'ness (that is, if the parent process is at a
-# nice level of 12, and the ENCNICE is set to 3, then the encoder will
-# run with an absolute nice value of 15. Note also, that setting these
-# to be empty will result in some default niceness increase (4 in tcsh
-# and 10 using the bsdutils' nice).
-#ENCNICE=10
-#READNICE=10
-#DISTMP3NICE=10
-
-# Paths of programs to use
-#LAME=lame
-#TOOLAME=toolame
-#GOGO=gogo
-#BLADEENC=bladeenc
-#L3ENC=l3enc
-#XINGMP3ENC=xingmp3enc
-#MP3ENC=mp3enc
-#VORBIZE=vorbize
-#OGGENC=oggenc
-#FLAC=flac
-#SPEEXENC=speexenc
-#MPPENC=mppenc
-#AACENC=faac
-
-#ID3=id3
-#ID3V2=id3v2
-#CDPARANOIA=cdparanoia
-#CDDA2WAV=icedax
-#CDDAFS=cp
-#CDDISCID=cd-discid
-#CDDBTOOL=cddb-tool
-#EJECT=eject
-#MD5SUM=md5sum
-#DISTMP3=distmp3
-#VORBISCOMMENT=vorbiscomment
-#METAFLAC=metaflac
-#NORMALIZE=normalize-audio
-#CDSPEED=eject
-#VORBISGAIN=vorbisgain
-#MKCUE=mkcue
-#MKTOC=cdrdao
-#DIFF=diff
-
-# Options to call programs with:
-
-# If HTTPGET is modified, the HTTPGETOPTS options should also be defined
-# accordingly. If HTTPGET is changed, the default options will be set,
-# if HTTPGETOPTS is empty or not defined.
-#HTTPGET=wget
-# for fetch (FreeBSD): HTTPGETOPTS="-q -o -"
-# for wget: HTTPGETOPTS="-q -nv -O -"
-# for curl (MacOSX): HTTPGETOPTS="-f -s"
-#HTTPGETOPTS="-q -O -"
-
-# MP3:
-#LAMEOPTS=
-#TOOLAMEOPTS=
-#GOGOOPTS=
-#BLADEENCOPTS=
-#L3ENCOPTS=
-#XINGMP3ENCOPTS=
-#MP3ENCOPTS=
-
-# Ogg:
-#VORBIZEOPTS=
-#OGGENCOPTS=
-
-# FLAC:
-#FLACOPTS="-f"
-
-# Speex:
-#SPEEXENCOPTS=
-
-# MPP/MP+ (Musepack):
-# For the encoder options take a look at the manpage. Set them like this:
-# MPPENCOPTS='--xtreme' if you wish to set more options then:
-# MPPENCOPTS='--xtreme --skip 20 --fade 10'
-#MPPENCOPTS=
-
-# M4A/AAC
-#AACENCOPTS=
-
-#ID3OPTS=
-#ID3V2OPTS=
-#CDPARANOIAOPTS=
-#CDDA2WAVOPTS=
-#CDDAFSOPTS="-f"
-#CDDBTOOLOPTS=
-#EJECTOPTS=
-#DISTMP3OPTS=
-#NORMALIZEOPTS=
-#CDSPEEDOPTS="-x"
-#CDSPEEDVALUE=""
-#MKCUEOPTS=""
-#MKTOCOPTS=""
-#DIFFOPTS=""
-#VORBISCOMMENTOPTS="-R"
-#METAFLACOPTS="--no-utf8-convert"
-#DIFFOPTS=""
-
-# Actions to take
-# Comma-separated list of one or more of the following:
-# cddb,cue,read,normalize,encode,tag,move,playlist,clean,default
-# encode implies read
-# normalize implies read
-# tag implies cddb,read,encode
-# move implies cddb,read,encode,tag
-# playlist implies cddb
-# An action can be added to the "default" action by specifying it along with
-# "default", without having to repeat the default ones:
-# ACTIONS=default,playlist
-# The default action list (referenced as "default") is defined in the following
-# comment:
-#ACTIONS=cddb,read,encode,tag,move,clean
-
-# CD device you want to read from
-# It can be defined as a singletrack flac file, but since it might change from
-# file to file it makes little sense to define it here.
-#CDROM=/dev/cdrom
-# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
-# If we are using the ide-scsi emulation layer, we need to define a "g"
-#CDPARANOIACDROMBUS="d"
-
-# If you'd like to make a default location that overrides the current
-# directory for putting mp3's, uncomment this.
-#OUTPUTDIR=`pwd`
-
-# Or if you'd just like to put the temporary .wav files somewhere else
-# you can specify that here
-#WAVOUTPUTDIR=`pwd`
-
-# OUTPUTTYPE can be either "ogg", "mp3", "flac" or "spx", or a combination
-# of them separated with ",": "ogg,mp3".
-#OUTPUTTYPE=ogg
-
-# Output filename format - change this to reflect your inner desire to
-# organize things differently than everyone else :)
-# You have the following variables at your disposal:
-# OUTPUT, GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, and TRACKNUM.
-# Make sure to single-quote this variable. abcde will automatically create
-# the directory portion of this filename.
-# NOTICE: OUTPUTTYPE has been deprecated in the OUTPUTFORMAT string.
-# Since multiple-output was integrated we always append the file type
-# to the files. Remove it from your user defined string if you are getting
-# files like ".ogg.ogg".
-#OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
-
-# Like OUTPUTFORMAT but for Various Artists discs.
-#VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
-
-# Like OUTPUTFORMAT and VAOUTPUTFORMAT but for the ONEFILE rips.
-#ONETRACKOUTPUTFORMAT=$OUTPUTFORMAT
-#VAONETRACKOUTPUTFORMAT=$VAOUTPUTFORMAT
-
-# Define how many encoders to run at once. This makes for huge speedups
-# on SMP systems. Defaults to 1. Equivalent to -j.
-#MAXPROCS=2
-
-# Support for systems with low disk space:
-# n: Default parallelization (read entire CD in while encoding)
-# y: No parallelization (rip, encode, rip, encode...)
-#LOWDISK=n
-
-# If set to y, enables batch mode normalization, which preserves relative
-# volume differences between tracks of an album.
-#BATCHNORM=n
-
-# Enables nogap encoding when using the 'lame' encoder.
-#NOGAP=y
-
-# Set the playlist file location format. Uses the same variables and format
-# as OUTPUTFORMAT. If the playlist is specified to be in a subdirectory, it
-# will be created for you and the playlist will reference files from that
-# subdirectory.
-#PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
-# If you want to prefix every filename in a playlist with an arbitrary
-# string (such as 'http://you/yourstuff/'), use this option
-#PLAYLISTDATAPREFIX=''
-
-#Like PLAYLIST{FORMAT,DATAPREFIX} but for Various Artists discs:
-#VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
-#VAPLAYLISTDATAPREFIX=''
-
-#This will give the playlist CR-LF line-endings, if set to "y".
-#(some hardware players insist on CR-LF line-endings)
-#DOSPLAYLIST=n
-
-# Custom filename munging:
-# By default, abcde will do the following to CDDB data to get a useful
-# filename:
-# * Translate colons to a space and a dash for Windows compatibility
-# * Eat control characters, single quotes, and question marks
-# * Translate spaces and forward slashes to underscores
-# To change that, redefine the mungefilename function.
-# mungefilename receives the CDDB data (artist, track, title, whatever)
-# as $1 and outputs it on stdout.
-#mungefilename ()
-#{
-# echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
-#}
-
-# Custom genre munging:
-# By default we just transform uppercase to lowercase. Not much of a fancy
-# function, with not much use, but one can disable it or just turn the first
-# Uppercase.
-#mungegenre ()
-#{
-# echo $CDGENRE | tr "[:upper:]" "[:lower:]"
-#}
-
-
-# Custom pre-read function
-# By default it does nothing.
-# You can set some things to get abcde function in better ways:
-# * Close the CD tray using eject -t (if available in eject and supported by
-# your CD device.
-# * Set the CD speed. You can also use the built-in options, but you can also
-# set it here. In Debian, eject -x and cdset -x do the job.
-# KEEP IN MIND that executables included in pre_read must be in your $PATH or
-# you have to define them with full /path/to/binary
-# Uncomment and substitute the ":" with your commands.
-#pre_read ()
-#{
-#:
-#}
-
-# Custom post-read function
-# By default it does nothing.
-# You can set some things to get abcde function in better ways:
-# * Store a copy of the CD TOC.
-# KEEP IN MIND that executables included in post_read must be in your $PATH or
-# you have to define them with full /path/to/binary
-# Uncomment and substitute the ":" with your commands.
-#post_read ()
-#{
-#:
-#}
-
-# post_encode
-# By default it does nothing.
-# You can set some things to get abcde function in better ways:
-# * Move the resulting directory over the network
-# * Compare results with a previously made run, for tests
-# KEEP IN MIND that executables included in post_encode must be in your $PATH or
-# you have to define them with full /path/to/binary
-# Uncomment and substitute the ":" with your commands.
-#post_encode ()
-#{
-#:
-#}
-
-# If you'd like to have abcde eject the cdrom after all the tracks have been
-# read, uncomment the following line.
-#EJECTCD=y
-
-# To encode on the remote machines foo, bar, baz, quux, and qiix, as well as
-# on the local machine (requires distmp3 to be installed on local machine and
-# distmp3host to be installed and running on all remote machines - see README)
-#REMOTEHOSTS=foo,bar,baz,quux,qiix
-
-# Set to 1,2, etc. to obtain some information about actions happening in the background
-# Useful if you have a slow network or CDDB servers seem unresponsive.
-#EXTRAVERBOSE=0
# .abcde.conf file in your home directory.
# CDDB options
+# Choose whether you want to use CDDB or Musicbrainz. Default is CDDB
+#CDDBMETHOD=cddb
# If you wish to use a different CDDB server, edit this line.
# If you just wanted to use a proxy server, just set your http_proxy
# distmp3host to be installed and running on all remote machines - see README)
#REMOTEHOSTS=foo,bar,baz,quux,qiix
-# Set to obtain some information about actions happening in the background
+# Set to 1,2, etc. to obtain some information about actions happening in the background
# Useful if you have a slow network or CDDB servers seem unresponsive.
-#EXTRAVERBOSE=n
+#EXTRAVERBOSE=0
--- /dev/null
+# System defaults for abcde version 2.2.x
+# Nothing in this file is uncommented by default.
+#
+# If you wish to override these system-wide settings, create your own
+# .abcde.conf file in your home directory.
+
+# CDDB options
+
+# If you wish to use a different CDDB server, edit this line.
+# If you just wanted to use a proxy server, just set your http_proxy
+# environment variable - wget will use it correctly.
+#CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
+
+# The CDDB protocol level.
+# Right now 5 is latin1 output and 6 is UTF8 encoding.
+#CDDBPROTO=6
+
+# The CDDB protocol requires hello information, including a valid username
+# and hostname. If you feel paranoid about giving away such info, edit this
+# line - the format is username@hostname.
+#HELLOINFO="`whoami`@`hostname`"
+
+# This controls the email address CDDB changes are submitted to.
+#CDDBSUBMIT=freedb-submit@freedb.org
+
+# The following options control whether or not fetched CDDB entries
+# are cached locally in $CDDBLOCALDIR
+#CDDBCOPYLOCAL="n"
+#CDDBLOCALDIR="$HOME/.cddb"
+#CDDBLOCALRECURSIVE="n"
+
+# If NOSUBMIT is set to y, then abcde will never prompt asking if you
+# wish to submit your edited cddb file.
+#NOSUBMIT=n
+
+# If NOCDDBQUERY is set to y, then abcde will never even try to access
+# the CDDB server; running abcde will automatically drop you into a
+# blank cddb file to edit at your leisure. This is the same as the
+# -n option. NOCDDBQUERY=y implies NOSUBMIT=y.
+#NOCDDBQUERY=n
+
+# Select here if you want to use the locally stored CDDB entries.
+# This is useful if you do a lot of editing to those CDDB entries.
+# Also, other tools like Grip store CDDB entries under $HOME/.cddb,
+# so they can be reused when ripping CDs.
+#CDDBUSELOCAL="n"
+
+# List, separated with a comma, the fields we want the parsing function to
+# output. Defaults to YEAR and GENRE, for a complete list of fields provided by
+# CDDB.
+# The fields are not case sensitive. Actually, "y,g" will work as fine as "Y,G"
+# or "YEAR, GENRE"
+#SHOWCDDBFIELDS=year,genre
+
+# Specify the style of encoder to use here -
+# oggenc, vorbize - for OGGENCODERSYNTAX
+# lame, gogo, bladeenc, l3enc, xingmp3enc, mp3enc - for MP3ENCODERSYNTAX
+# flac - the only supported for FLACENCODERSYNTAX at the moment
+# speexenc - the only encoder for SPEEXENCODERSYNTAX
+# mppenc - encoder for MPPENCODERSYNTAX
+# default is a valid option for oggenc, lame, flac, speexenc and mppenc.
+# Currently this affects the default location of the binary, the variable
+# to pick encoder command-line options from, and where the options are
+# given.
+MP3ENCODERSYNTAX=default
+#OGGENCODERSYNTAX=default
+#FLACENCODERSYNTAX=default
+#SPEEXENCODERSYNTAX=default
+#MPPENCODERSYNTAX=default
+#AACENCODERSYNTAX=default
+
+# Specify the syntax of the normalize binary here - so far only 'normalize'
+# is supported.
+#NORMALIZERSYNTAX=default
+
+# CD reader program to use - currently recognized options are 'cdparanoia',
+# 'icedax', 'cdda2wav', 'dagrab', 'cddafs' (Mac OS X only) and 'flac'.
+#CDROMREADERSYNTAX=cdparanoia
+
+# CUE reader syntax for the CUE reader program to use.
+# abcde supports 2 CUE modes: 'mkcue' and 'abcde.mkcue' so you can set the
+# MKCUE variable accordingly. The 'abcde.mkcue' uses an internal
+# implementation, without the need of an external program.
+#CUEREADERSYNTAX=default
+
+# Specify the program to convert a CUE sheet back to a CD disc ID for CDDB queries.
+# Select between '/path/to/cue2discid' (provided as an example) or
+# 'abcde.cue2discid', implemented internaly.
+#CUE2DISCID=abcde.cue2discid
+
+# Keep the wav files after encoding. Set it to "y" and remove "clean" from
+# the list of default actions, since we purge the temp directory as default.
+KEEPWAVS=y
+
+# Track padding: force abcde to pad tracks using 0, so every song uses a two
+# digit entry. If set to "y", even a single song encoding outputs a file like
+# 01.my_song.ext
+PADTRACKS=y
+
+# Define if you want abcde to be non-interactive.
+# Keep in mind that there is no way to deactivate it right now in the command
+# line, so setting this option makes abcde to be always non-interactive.
+#INTERACTIVE=n
+
+# Specify 'nice'ness of the encoder, the CD reader and the distmp3 proc.
+# This is a relative 'nice'ness (that is, if the parent process is at a
+# nice level of 12, and the ENCNICE is set to 3, then the encoder will
+# run with an absolute nice value of 15. Note also, that setting these
+# to be empty will result in some default niceness increase (4 in tcsh
+# and 10 using the bsdutils' nice).
+#ENCNICE=10
+#READNICE=10
+#DISTMP3NICE=10
+
+# Paths of programs to use
+#LAME=lame
+#TOOLAME=toolame
+#GOGO=gogo
+#BLADEENC=bladeenc
+#L3ENC=l3enc
+#XINGMP3ENC=xingmp3enc
+#MP3ENC=mp3enc
+#VORBIZE=vorbize
+#OGGENC=oggenc
+#FLAC=flac
+#SPEEXENC=speexenc
+#MPPENC=mppenc
+#AACENC=faac
+
+#ID3=id3
+#ID3V2=id3v2
+#CDPARANOIA=cdparanoia
+#CDDA2WAV=icedax
+#CDDAFS=cp
+#CDDISCID=cd-discid
+#CDDBTOOL=cddb-tool
+#EJECT=eject
+#MD5SUM=md5sum
+#DISTMP3=distmp3
+#VORBISCOMMENT=vorbiscomment
+#METAFLAC=metaflac
+NORMALIZE=normalize
+#CDSPEED=eject
+#VORBISGAIN=vorbisgain
+#MKCUE=mkcue
+#MKTOC=cdrdao
+#DIFF=diff
+
+# Options to call programs with:
+
+# If HTTPGET is modified, the HTTPGETOPTS options should also be defined
+# accordingly. If HTTPGET is changed, the default options will be set,
+# if HTTPGETOPTS is empty or not defined.
+#HTTPGET=wget
+# for fetch (FreeBSD): HTTPGETOPTS="-q -o -"
+# for wget: HTTPGETOPTS="-q -nv -O -"
+# for curl (MacOSX): HTTPGETOPTS="-f -s"
+#HTTPGETOPTS="-q -O -"
+
+# MP3:
+LAMEOPTS="--preset standard"
+#TOOLAMEOPTS=
+#GOGOOPTS=
+#BLADEENCOPTS=
+#L3ENCOPTS=
+#XINGMP3ENCOPTS=
+#MP3ENCOPTS=
+
+# Ogg:
+#VORBIZEOPTS=
+#OGGENCOPTS=
+
+# FLAC:
+#FLACOPTS="-f"
+
+# Speex:
+#SPEEXENCOPTS=
+
+# MPP/MP+ (Musepack):
+# For the encoder options take a look at the manpage. Set them like this:
+# MPPENCOPTS='--xtreme' if you wish to set more options then:
+# MPPENCOPTS='--xtreme --skip 20 --fade 10'
+#MPPENCOPTS=
+
+# M4A/AAC
+#AACENCOPTS=
+
+#ID3OPTS=
+#ID3V2OPTS=
+#CDPARANOIAOPTS=
+#CDDA2WAVOPTS=
+#CDDAFSOPTS="-f"
+#CDDBTOOLOPTS=
+#EJECTOPTS=
+#DISTMP3OPTS=
+#NORMALIZEOPTS=
+#CDSPEEDOPTS="-x"
+#CDSPEEDVALUE=""
+#MKCUEOPTS=""
+#MKTOCOPTS=""
+#DIFFOPTS=""
+#VORBISCOMMENTOPTS="-R"
+#METAFLACOPTS="--no-utf8-convert"
+#DIFFOPTS=""
+
+# Actions to take
+# Comma-separated list of one or more of the following:
+# cddb,cue,read,normalize,encode,tag,move,playlist,clean,default
+# encode implies read
+# normalize implies read
+# tag implies cddb,read,encode
+# move implies cddb,read,encode,tag
+# playlist implies cddb
+# An action can be added to the "default" action by specifying it along with
+# "default", without having to repeat the default ones:
+# ACTIONS=default,playlist
+# The default action list (referenced as "default") is defined in the following
+# comment:
+#ACTIONS=cddb,read,encode,tag,move,clean
+ACTIONS=cddb,read,normalize,encode,tag,move,playlist,clean
+
+# CD device you want to read from
+# It can be defined as a singletrack flac file, but since it might change from
+# file to file it makes little sense to define it here.
+#CDROM=/dev/cdrom
+# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
+# If we are using the ide-scsi emulation layer, we need to define a "g"
+#CDPARANOIACDROMBUS="d"
+
+# If you'd like to make a default location that overrides the current
+# directory for putting mp3's, uncomment this.
+#OUTPUTDIR=`pwd`
+
+# Or if you'd just like to put the temporary .wav files somewhere else
+# you can specify that here
+#WAVOUTPUTDIR=`pwd`
+
+# OUTPUTTYPE can be either "ogg", "mp3", "flac" or "spx", or a combination
+# of them separated with ",": "ogg,mp3".
+#OUTPUTTYPE=ogg
+OUTPUTTYPE=mp3
+
+# Output filename format - change this to reflect your inner desire to
+# organize things differently than everyone else :)
+# You have the following variables at your disposal:
+# OUTPUT, GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, and TRACKNUM.
+# Make sure to single-quote this variable. abcde will automatically create
+# the directory portion of this filename.
+# NOTICE: OUTPUTTYPE has been deprecated in the OUTPUTFORMAT string.
+# Since multiple-output was integrated we always append the file type
+# to the files. Remove it from your user defined string if you are getting
+# files like ".ogg.ogg".
+#OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
+OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${ARTISTFILE}_-_${ALBUMFILE}_-_${TRACKNUM}.${TRACKFILE}'
+
+# Like OUTPUTFORMAT but for Various Artists discs.
+#VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
+VAOUTPUTFORMAT='${ALBUMFILE}/${TRACKNUM}_-_${ARTISTFILE}_-_${TRACKFILE}'
+
+# Like OUTPUTFORMAT and VAOUTPUTFORMAT but for the ONEFILE rips.
+#ONETRACKOUTPUTFORMAT=$OUTPUTFORMAT
+#VAONETRACKOUTPUTFORMAT=$VAOUTPUTFORMAT
+
+# Define how many encoders to run at once. This makes for huge speedups
+# on SMP systems. Defaults to 1. Equivalent to -j.
+#MAXPROCS=2
+
+# Support for systems with low disk space:
+# n: Default parallelization (read entire CD in while encoding)
+# y: No parallelization (rip, encode, rip, encode...)
+#LOWDISK=n
+
+# If set to y, enables batch mode normalization, which preserves relative
+# volume differences between tracks of an album.
+#BATCHNORM=n
+
+# Enables nogap encoding when using the 'lame' encoder.
+NOGAP=y
+
+# Set the playlist file location format. Uses the same variables and format
+# as OUTPUTFORMAT. If the playlist is specified to be in a subdirectory, it
+# will be created for you and the playlist will reference files from that
+# subdirectory.
+#PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+# If you want to prefix every filename in a playlist with an arbitrary
+# string (such as 'http://you/yourstuff/'), use this option
+#PLAYLISTDATAPREFIX=''
+
+#Like PLAYLIST{FORMAT,DATAPREFIX} but for Various Artists discs:
+#VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+#VAPLAYLISTDATAPREFIX=''
+
+#This will give the playlist CR-LF line-endings, if set to "y".
+#(some hardware players insist on CR-LF line-endings)
+#DOSPLAYLIST=n
+
+# Custom filename munging:
+# By default, abcde will do the following to CDDB data to get a useful
+# filename:
+# * Translate colons to a space and a dash for Windows compatibility
+# * Eat control characters, single quotes, and question marks
+# * Translate spaces and forward slashes to underscores
+# To change that, redefine the mungefilename function.
+# mungefilename receives the CDDB data (artist, track, title, whatever)
+# as $1 and outputs it on stdout.
+#mungefilename ()
+#{
+# echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
+#}
+
+# Custom genre munging:
+# By default we just transform uppercase to lowercase. Not much of a fancy
+# function, with not much use, but one can disable it or just turn the first
+# Uppercase.
+#mungegenre ()
+#{
+# echo $CDGENRE | tr "[:upper:]" "[:lower:]"
+#}
+
+
+# Custom pre-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Close the CD tray using eject -t (if available in eject and supported by
+# your CD device.
+# * Set the CD speed. You can also use the built-in options, but you can also
+# set it here. In Debian, eject -x and cdset -x do the job.
+# KEEP IN MIND that executables included in pre_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#pre_read ()
+#{
+#:
+#}
+
+# Custom post-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Store a copy of the CD TOC.
+# KEEP IN MIND that executables included in post_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_read ()
+#{
+#:
+#}
+
+# post_encode
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Move the resulting directory over the network
+# * Compare results with a previously made run, for tests
+# KEEP IN MIND that executables included in post_encode must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_encode ()
+#{
+#:
+#}
+
+# If you'd like to have abcde eject the cdrom after all the tracks have been
+# read, uncomment the following line.
+#EJECTCD=y
+
+# To encode on the remote machines foo, bar, baz, quux, and qiix, as well as
+# on the local machine (requires distmp3 to be installed on local machine and
+# distmp3host to be installed and running on all remote machines - see README)
+#REMOTEHOSTS=foo,bar,baz,quux,qiix
+
+# Set to obtain some information about actions happening in the background
+# Useful if you have a slow network or CDDB servers seem unresponsive.
+#EXTRAVERBOSE=n
--- /dev/null
+# System defaults for abcde version 2.2.x
+# Nothing in this file is uncommented by default.
+#
+# If you wish to override these system-wide settings, create your own
+# .abcde.conf file in your home directory.
+
+# CDDB options
+# Choose whether you want to use CDDB or Musicbrainz. Default is CDDB
+#CDDBMETHOD=cddb
+
+# If you wish to use a different CDDB server, edit this line.
+# If you just wanted to use a proxy server, just set your http_proxy
+# environment variable - wget will use it correctly.
+#CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
+
+# The CDDB protocol level.
+# Right now 5 is latin1 output and 6 is UTF8 encoding.
+#CDDBPROTO=6
+
+# The CDDB protocol requires hello information, including a valid username
+# and hostname. If you feel paranoid about giving away such info, edit this
+# line - the format is username@hostname.
+#HELLOINFO="`whoami`@`hostname`"
+
+# This controls the email address CDDB changes are submitted to.
+#CDDBSUBMIT=freedb-submit@freedb.org
+
+# The following options control whether or not fetched CDDB entries
+# are cached locally in $CDDBLOCALDIR
+#CDDBCOPYLOCAL="n"
+#CDDBLOCALDIR="$HOME/.cddb"
+#CDDBLOCALRECURSIVE="n"
+
+# If NOSUBMIT is set to y, then abcde will never prompt asking if you
+# wish to submit your edited cddb file.
+#NOSUBMIT=n
+
+# If NOCDDBQUERY is set to y, then abcde will never even try to access
+# the CDDB server; running abcde will automatically drop you into a
+# blank cddb file to edit at your leisure. This is the same as the
+# -n option. NOCDDBQUERY=y implies NOSUBMIT=y.
+#NOCDDBQUERY=n
+
+# Select here if you want to use the locally stored CDDB entries.
+# This is useful if you do a lot of editing to those CDDB entries.
+# Also, other tools like Grip store CDDB entries under $HOME/.cddb,
+# so they can be reused when ripping CDs.
+#CDDBUSELOCAL="n"
+
+# List, separated with a comma, the fields we want the parsing function to
+# output. Defaults to YEAR and GENRE, for a complete list of fields provided by
+# CDDB.
+# The fields are not case sensitive. Actually, "y,g" will work as fine as "Y,G"
+# or "YEAR, GENRE"
+#SHOWCDDBFIELDS=year,genre
+
+# Specify the style of encoder to use here -
+# oggenc, vorbize - for OGGENCODERSYNTAX
+# lame, gogo, bladeenc, l3enc, xingmp3enc, mp3enc - for MP3ENCODERSYNTAX
+# flac - the only supported for FLACENCODERSYNTAX at the moment
+# speexenc - the only encoder for SPEEXENCODERSYNTAX
+# mppenc - encoder for MPPENCODERSYNTAX
+# default is a valid option for oggenc, lame, flac, speexenc and mppenc.
+# Currently this affects the default location of the binary, the variable
+# to pick encoder command-line options from, and where the options are
+# given.
+#MP3ENCODERSYNTAX=default
+#OGGENCODERSYNTAX=default
+#FLACENCODERSYNTAX=default
+#SPEEXENCODERSYNTAX=default
+#MPPENCODERSYNTAX=default
+#AACENCODERSYNTAX=default
+
+# Specify the syntax of the normalize binary here - so far only 'normalize'
+# is supported.
+#NORMALIZERSYNTAX=default
+
+# CD reader program to use - currently recognized options are 'cdparanoia',
+# 'icedax', 'cdda2wav', 'dagrab', 'cddafs' (Mac OS X only) and 'flac'.
+#CDROMREADERSYNTAX=cdparanoia
+
+# CUE reader syntax for the CUE reader program to use.
+# abcde supports 2 CUE modes: 'mkcue' and 'abcde.mkcue' so you can set the
+# MKCUE variable accordingly. The 'abcde.mkcue' uses an internal
+# implementation, without the need of an external program.
+#CUEREADERSYNTAX=default
+
+# Specify the program to convert a CUE sheet back to a CD disc ID for CDDB queries.
+# Select between '/path/to/cue2discid' (provided as an example) or
+# 'abcde.cue2discid', implemented internaly.
+#CUE2DISCID=abcde.cue2discid
+
+# Keep the wav files after encoding. Set it to "y" and remove "clean" from
+# the list of default actions, since we purge the temp directory as default.
+#KEEPWAVS=n
+
+# Track padding: force abcde to pad tracks using 0, so every song uses a two
+# digit entry. If set to "y", even a single song encoding outputs a file like
+# 01.my_song.ext
+#PADTRACKS=n
+
+# Define if you want abcde to be non-interactive.
+# Keep in mind that there is no way to deactivate it right now in the command
+# line, so setting this option makes abcde to be always non-interactive.
+#INTERACTIVE=n
+
+# Specify 'nice'ness of the encoder, the CD reader and the distmp3 proc.
+# This is a relative 'nice'ness (that is, if the parent process is at a
+# nice level of 12, and the ENCNICE is set to 3, then the encoder will
+# run with an absolute nice value of 15. Note also, that setting these
+# to be empty will result in some default niceness increase (4 in tcsh
+# and 10 using the bsdutils' nice).
+#ENCNICE=10
+#READNICE=10
+#DISTMP3NICE=10
+
+# Paths of programs to use
+#LAME=lame
+#TOOLAME=toolame
+#GOGO=gogo
+#BLADEENC=bladeenc
+#L3ENC=l3enc
+#XINGMP3ENC=xingmp3enc
+#MP3ENC=mp3enc
+#VORBIZE=vorbize
+#OGGENC=oggenc
+#FLAC=flac
+#SPEEXENC=speexenc
+#MPPENC=mppenc
+#AACENC=faac
+
+#ID3=id3
+#ID3V2=id3v2
+#CDPARANOIA=cdparanoia
+#CDDA2WAV=icedax
+#CDDAFS=cp
+#CDDISCID=cd-discid
+#CDDBTOOL=cddb-tool
+#EJECT=eject
+#MD5SUM=md5sum
+#DISTMP3=distmp3
+#VORBISCOMMENT=vorbiscomment
+#METAFLAC=metaflac
+#NORMALIZE=normalize-audio
+#CDSPEED=eject
+#VORBISGAIN=vorbisgain
+#MKCUE=mkcue
+#MKTOC=cdrdao
+#DIFF=diff
+
+# Options to call programs with:
+
+# If HTTPGET is modified, the HTTPGETOPTS options should also be defined
+# accordingly. If HTTPGET is changed, the default options will be set,
+# if HTTPGETOPTS is empty or not defined.
+#HTTPGET=wget
+# for fetch (FreeBSD): HTTPGETOPTS="-q -o -"
+# for wget: HTTPGETOPTS="-q -nv -O -"
+# for curl (MacOSX): HTTPGETOPTS="-f -s"
+#HTTPGETOPTS="-q -O -"
+
+# MP3:
+#LAMEOPTS=
+#TOOLAMEOPTS=
+#GOGOOPTS=
+#BLADEENCOPTS=
+#L3ENCOPTS=
+#XINGMP3ENCOPTS=
+#MP3ENCOPTS=
+
+# Ogg:
+#VORBIZEOPTS=
+#OGGENCOPTS=
+
+# FLAC:
+#FLACOPTS="-f"
+
+# Speex:
+#SPEEXENCOPTS=
+
+# MPP/MP+ (Musepack):
+# For the encoder options take a look at the manpage. Set them like this:
+# MPPENCOPTS='--xtreme' if you wish to set more options then:
+# MPPENCOPTS='--xtreme --skip 20 --fade 10'
+#MPPENCOPTS=
+
+# M4A/AAC
+#AACENCOPTS=
+
+#ID3OPTS=
+#ID3V2OPTS=
+#CDPARANOIAOPTS=
+#CDDA2WAVOPTS=
+#CDDAFSOPTS="-f"
+#CDDBTOOLOPTS=
+#EJECTOPTS=
+#DISTMP3OPTS=
+#NORMALIZEOPTS=
+#CDSPEEDOPTS="-x"
+#CDSPEEDVALUE=""
+#MKCUEOPTS=""
+#MKTOCOPTS=""
+#DIFFOPTS=""
+#VORBISCOMMENTOPTS="-R"
+#METAFLACOPTS="--no-utf8-convert"
+#DIFFOPTS=""
+
+# Actions to take
+# Comma-separated list of one or more of the following:
+# cddb,cue,read,normalize,encode,tag,move,playlist,clean,default
+# encode implies read
+# normalize implies read
+# tag implies cddb,read,encode
+# move implies cddb,read,encode,tag
+# playlist implies cddb
+# An action can be added to the "default" action by specifying it along with
+# "default", without having to repeat the default ones:
+# ACTIONS=default,playlist
+# The default action list (referenced as "default") is defined in the following
+# comment:
+#ACTIONS=cddb,read,encode,tag,move,clean
+
+# CD device you want to read from
+# It can be defined as a singletrack flac file, but since it might change from
+# file to file it makes little sense to define it here.
+#CDROM=/dev/cdrom
+# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
+# If we are using the ide-scsi emulation layer, we need to define a "g"
+#CDPARANOIACDROMBUS="d"
+
+# If you'd like to make a default location that overrides the current
+# directory for putting mp3's, uncomment this.
+#OUTPUTDIR=`pwd`
+
+# Or if you'd just like to put the temporary .wav files somewhere else
+# you can specify that here
+#WAVOUTPUTDIR=`pwd`
+
+# OUTPUTTYPE can be either "ogg", "mp3", "flac" or "spx", or a combination
+# of them separated with ",": "ogg,mp3".
+#OUTPUTTYPE=ogg
+
+# Output filename format - change this to reflect your inner desire to
+# organize things differently than everyone else :)
+# You have the following variables at your disposal:
+# OUTPUT, GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, and TRACKNUM.
+# Make sure to single-quote this variable. abcde will automatically create
+# the directory portion of this filename.
+# NOTICE: OUTPUTTYPE has been deprecated in the OUTPUTFORMAT string.
+# Since multiple-output was integrated we always append the file type
+# to the files. Remove it from your user defined string if you are getting
+# files like ".ogg.ogg".
+#OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
+
+# Like OUTPUTFORMAT but for Various Artists discs.
+#VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
+
+# Like OUTPUTFORMAT and VAOUTPUTFORMAT but for the ONEFILE rips.
+#ONETRACKOUTPUTFORMAT=$OUTPUTFORMAT
+#VAONETRACKOUTPUTFORMAT=$VAOUTPUTFORMAT
+
+# Define how many encoders to run at once. This makes for huge speedups
+# on SMP systems. Defaults to 1. Equivalent to -j.
+#MAXPROCS=2
+
+# Support for systems with low disk space:
+# n: Default parallelization (read entire CD in while encoding)
+# y: No parallelization (rip, encode, rip, encode...)
+#LOWDISK=n
+
+# If set to y, enables batch mode normalization, which preserves relative
+# volume differences between tracks of an album.
+#BATCHNORM=n
+
+# Enables nogap encoding when using the 'lame' encoder.
+#NOGAP=y
+
+# Set the playlist file location format. Uses the same variables and format
+# as OUTPUTFORMAT. If the playlist is specified to be in a subdirectory, it
+# will be created for you and the playlist will reference files from that
+# subdirectory.
+#PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+# If you want to prefix every filename in a playlist with an arbitrary
+# string (such as 'http://you/yourstuff/'), use this option
+#PLAYLISTDATAPREFIX=''
+
+#Like PLAYLIST{FORMAT,DATAPREFIX} but for Various Artists discs:
+#VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
+#VAPLAYLISTDATAPREFIX=''
+
+#This will give the playlist CR-LF line-endings, if set to "y".
+#(some hardware players insist on CR-LF line-endings)
+#DOSPLAYLIST=n
+
+# Custom filename munging:
+# By default, abcde will do the following to CDDB data to get a useful
+# filename:
+# * Translate colons to a space and a dash for Windows compatibility
+# * Eat control characters, single quotes, and question marks
+# * Translate spaces and forward slashes to underscores
+# To change that, redefine the mungefilename function.
+# mungefilename receives the CDDB data (artist, track, title, whatever)
+# as $1 and outputs it on stdout.
+#mungefilename ()
+#{
+# echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
+#}
+
+# Custom genre munging:
+# By default we just transform uppercase to lowercase. Not much of a fancy
+# function, with not much use, but one can disable it or just turn the first
+# Uppercase.
+#mungegenre ()
+#{
+# echo $CDGENRE | tr "[:upper:]" "[:lower:]"
+#}
+
+
+# Custom pre-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Close the CD tray using eject -t (if available in eject and supported by
+# your CD device.
+# * Set the CD speed. You can also use the built-in options, but you can also
+# set it here. In Debian, eject -x and cdset -x do the job.
+# KEEP IN MIND that executables included in pre_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#pre_read ()
+#{
+#:
+#}
+
+# Custom post-read function
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Store a copy of the CD TOC.
+# KEEP IN MIND that executables included in post_read must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_read ()
+#{
+#:
+#}
+
+# post_encode
+# By default it does nothing.
+# You can set some things to get abcde function in better ways:
+# * Move the resulting directory over the network
+# * Compare results with a previously made run, for tests
+# KEEP IN MIND that executables included in post_encode must be in your $PATH or
+# you have to define them with full /path/to/binary
+# Uncomment and substitute the ":" with your commands.
+#post_encode ()
+#{
+#:
+#}
+
+# If you'd like to have abcde eject the cdrom after all the tracks have been
+# read, uncomment the following line.
+#EJECTCD=y
+
+# To encode on the remote machines foo, bar, baz, quux, and qiix, as well as
+# on the local machine (requires distmp3 to be installed on local machine and
+# distmp3host to be installed and running on all remote machines - see README)
+#REMOTEHOSTS=foo,bar,baz,quux,qiix
+
+# Set to 1,2, etc. to obtain some information about actions happening in the background
+# Useful if you have a slow network or CDDB servers seem unresponsive.
+#EXTRAVERBOSE=0
--- /dev/null
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+#
+# /etc/screenrc
+#
+# This is the system wide screenrc.
+#
+# You can use this file to change the default behavior of screen system wide
+# or copy it to ~/.screenrc and use it as a starting point for your own
+# settings.
+#
+# Commands in this file are used to set options, bind screen functions to
+# keys, redefine terminal capabilities, and to automatically establish one or
+# more windows at the beginning of your screen session.
+#
+# This is not a comprehensive list of options, look at the screen manual for
+# details on everything that you can put in this file.
+#
+#
+
+# ==============================================================================
+# SCREEN SETTINGS
+# ==============================================================================
+
+# ESCAPE - the COMMAND CHARACTER
+# ===============================================================
+# escape ^aa # default
+# escape ^^^^ # suggested binding (Control-^) for Emacs users
+
+
+# PASSWORD
+# ===============================================================
+# This commands sets the *internal* password for the screen session.
+# WARNING!! If this is set then a "lock" command will only let you in to the
+# session after you enter the user's account password and then *also*
+# the internal password for that session. This gives additional safety but,
+# if you forget the internal password then you cannot resume your session.
+# Use :password to generate a password
+# password ODSJQf.4IJN7E # "1234"
+
+
+# VARIABLES
+# ===============================================================
+# No annoying audible bell, using "visual bell"
+# vbell on # default: off
+# vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!"
+
+# Automatically detach on hangup.
+ autodetach on # default: on
+
+# Don't display the copyright page
+ startup_message off # default: on
+
+# Uses nethack-style messages
+# nethack on # default: off
+
+# Affects the copying of text regions
+ crlf off # default: off
+
+# Enable/disable multiuser mode. Standard screen operation is singleuser.
+# In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used
+# to enable (and disable) other user accessing this screen session.
+# Requires suid-root.
+ multiuser off
+
+# Change default scrollback value for new windows
+ defscrollback 50000 # default: 100
+
+# Define the time that all windows monitored for silence should
+# wait before displaying a message. Default 30 seconds.
+ silencewait 15 # default: 30
+
+# bufferfile: The file to use for commands
+# "readbuf" ('<') and "writebuf" ('>'):
+ bufferfile $HOME/.screen_exchange
+#
+# hardcopydir: The directory which contains all hardcopies.
+# hardcopydir ~/.hardcopy
+# hardcopydir ~/.screen
+#
+# shell: Default process started in screen's windows.
+# Makes it possible to use a different shell inside screen
+# than is set as the default login shell.
+# If begins with a '-' character, the shell will be started as a login shell.
+# shell zsh
+# shell bash
+# shell ksh
+ shell -$SHELL
+
+caption always " %{gw}$LOGNAME@%H | %{bw}%c%{-} | %{kw}%-Lw%{rw}%50>%{rW}%n%f* %t %{kw}%+LW%<"
+
+# shellaka '> |tcsh'
+# shelltitle '$ |bash'
+
+# emulate .logout message
+ pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended."
+
+# caption always " %w --- %c:%s"
+# caption always "%3n %t%? @%u%?%? [%h]%?%=%c"
+
+# advertise hardstatus support to $TERMCAP
+# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\'
+
+# set every new windows hardstatus line to somenthing descriptive
+# defhstatus "screen: ^En (^Et)"
+
+# don't kill window after the process died
+# zombie "^["
+
+# ignore displays that block on output
+defnonblock on
+
+# XTERM TWEAKS
+# ===============================================================
+
+# xterm understands both im/ic and doesn't have a status line.
+# Note: Do not specify im and ic in the real termcap/info file as
+# some programs (e.g. vi) will not work anymore.
+ termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
+ terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
+
+# 80/132 column switching must be enabled for ^AW to work
+# change init sequence to not switch width
+ termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l
+
+# Make the output buffer large for (fast) xterms.
+# termcapinfo xterm* OL=10000
+ termcapinfo xterm* OL=100
+
+# tell screen that xterm can switch to dark background and has function
+# keys.
+ termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l'
+ termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~'
+ termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~'
+
+# special xterm hardstatus: use the window title.
+ termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
+
+#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l'
+ termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l'
+
+# emulate part of the 'K' charset
+ termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337'
+
+# xterm-52 tweaks:
+# - uses background color for delete operations
+ termcapinfo xterm* be
+
+# Do not use xterm's alternative window buffer, it breaks scrollback (see bug #61195)
+ termcapinfo xterm|xterms|xs ti@:te=\E[2J
+
+# WYSE TERMINALS
+# ===============================================================
+
+#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff")
+#essential to have it here, as this is a slow terminal.
+ termcapinfo wy75-42 xo:hs@
+
+# New termcap sequences for cursor application mode.
+ termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J
+
+
+# OTHER TERMINALS
+# ===============================================================
+
+# make hp700 termcap/info better
+ termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
+
+# Extend the vt100 desciption by some sequences.
+ termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC
+ terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC
+ termcapinfo linux C8
+# old rxvt versions also need this
+# termcapinfo rxvt C8
+
+
+# KEYBINDINGS
+# ==============================================================
+# The "bind" command assign keys to (internal) commands
+# SCREEN checks all the keys you type; you type the key
+# which is known as the "command character" then SCREEN
+# eats this key, too, and checks whether this key is
+# "bound" to a command. If so then SCREEN will execute it.
+#
+# The command "bind" allows you to chose which keys
+# will be assigned to the commands.
+#
+# Some commands are bound to several keys -
+# usually to both some letter and its corresponding
+# control key combination, eg the command
+# "(create) screen" is bound to both 'c' and '^C'.
+#
+# The following list shows the default bindings:
+#
+# break ^B b
+# clear C
+# colon :
+# copy ^[ [
+# detach ^D d
+# digraph ^V
+# displays *
+# dumptermcap .
+# fit F
+# flow ^F f
+# focus ^I
+# hardcopy h
+# help ?
+# history { }
+# info i
+# kill K k
+# lastmsg ^M m
+# license ,
+# log H
+# login L
+# meta x
+# monitor M
+# next ^@ ^N sp n
+# number N
+# only Q
+# other ^X
+# pow_break B
+# pow_detach D
+# prev ^H ^P p ^?
+# quit \
+# readbuf <
+# redisplay ^L l
+# remove X
+# removebuf =
+# reset Z
+# screen ^C c
+# select " '
+# silence _
+# split S
+# suspend ^Z z
+# time ^T t
+# title A
+# vbell ^G
+# version v
+# width W
+# windows ^W w
+# wrap ^R r
+# writebuf >
+# xoff ^S s
+# xon ^Q q
+# ^] paste .
+# - select -
+# 0 select 0
+# 1 select 1
+# 2 select 2
+# 3 select 3
+# 4 select 4
+# 5 select 5
+# 6 select 6
+# 7 select 7
+# 8 select 8
+# 9 select 9
+# I login on
+# O login off
+# ] paste .
+#
+
+# And here are the default bind commands if you need them:
+#
+# bind A title
+# bind C clear
+# bind D pow_detach
+# bind F fit
+# bind H log
+# bind I login on
+# bind K kill
+# bind L login
+# bind M monitor
+# bind N number
+# bind O login off
+# bind Q only
+# bind S split
+# bind W width
+# bind X remove
+# bind Z reset
+
+# Let's remove some dangerous key bindings ...
+ bind k
+ bind ^k
+# bind . dumptermcap # default
+ bind .
+# bind ^\ quit # default
+ bind ^\
+# bind \\ quit # default
+ bind \\
+# bind ^h ??? # default
+ bind ^h
+# bind h hardcopy # default
+ bind h
+
+# ... and make them better.
+ bind 'K' kill
+ bind 'I' login on
+ bind 'O' login off
+ bind '}' history
+
+# Yet another hack:
+# Prepend/append register [/] to the paste if ^a^] is pressed.
+# This lets me have autoindent mode in vi.
+ register [ "\033:se noai\015a"
+ register ] "\033:se ai\015a"
+ bind ^] paste [.]
+
+
+# hardstatus alwaysignore
+# hardstatus alwayslastline "%Lw"
+
+# Resize the current region. The space will be removed from or added to
+# the region below or if there's not enough space from the region above.
+ bind = resize =
+ bind + resize +3
+ bind - resize -3
+# bind _ resize max
+#
+# attrcolor u "-u b"
+# attrcolor b "R"
+
+# STARTUP SCREENS
+# ===============================================================
+# Defines the time screen delays a new message when one message
+# is currently displayed. The default is 1 second.
+# msgminwait 2
+
+# Time a message is displayed if screen is not disturbed by
+# other activity. The dafault is 5 seconds:
+# msgwait 2
+
+# Briefly show the version number of this starting
+# screen session - but only for *one* second:
+# msgwait 1
+# version
+
+# Welcome the user:
+# echo "welcome :-)"
+# echo "I love you today."
+
+# Uncomment one/some following lines to automatically let
+# SCREEN start some programs in the given window numbers:
+# screen -t MAIL 0 mutt
+# screen -t EDIT 1 vim
+# screen -t GOOGLE 2 links http://www.google.com
+# screen -t NEWS 3 slrn
+# screen -t WWW 4 links http://www.math.fu-berlin.de/~guckes/
+# screen 5
+# screen 6
+
+# Set the environment variable var to value string. If only var is specified,
+# you'll be prompted to enter a value. If no parameters are specified,
+# you'll be prompted for both variable and value. The environment is
+# inherited by all subsequently forked shells.
+# setenv PROMPT_COMMAND 'echo -n -e "\033k\033\134"'
+
+# Don't you want to start programs which need a DISPLAY ?
+# setenv DISPLAY ''
--- /dev/null
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+#
+# /etc/screenrc
+#
+# This is the system wide screenrc.
+#
+# You can use this file to change the default behavior of screen system wide
+# or copy it to ~/.screenrc and use it as a starting point for your own
+# settings.
+#
+# Commands in this file are used to set options, bind screen functions to
+# keys, redefine terminal capabilities, and to automatically establish one or
+# more windows at the beginning of your screen session.
+#
+# This is not a comprehensive list of options, look at the screen manual for
+# details on everything that you can put in this file.
+#
+#
+
+# ==============================================================================
+# SCREEN SETTINGS
+# ==============================================================================
+
+# ESCAPE - the COMMAND CHARACTER
+# ===============================================================
+# escape ^aa # default
+# escape ^^^^ # suggested binding (Control-^) for Emacs users
+
+
+# PASSWORD
+# ===============================================================
+# This commands sets the *internal* password for the screen session.
+# WARNING!! If this is set then a "lock" command will only let you in to the
+# session after you enter the user's account password and then *also*
+# the internal password for that session. This gives additional safety but,
+# if you forget the internal password then you cannot resume your session.
+# Use :password to generate a password
+# password ODSJQf.4IJN7E # "1234"
+
+
+# VARIABLES
+# ===============================================================
+# No annoying audible bell, using "visual bell"
+# vbell on # default: off
+# vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!"
+
+# Automatically detach on hangup.
+ autodetach on # default: on
+
+# Don't display the copyright page
+ startup_message off # default: on
+
+# Uses nethack-style messages
+# nethack on # default: off
+
+# Affects the copying of text regions
+ crlf off # default: off
+
+# Enable/disable multiuser mode. Standard screen operation is singleuser.
+# In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used
+# to enable (and disable) other user accessing this screen session.
+# Requires suid-root.
+ multiuser off
+
+# Change default scrollback value for new windows
+ defscrollback 1000 # default: 100
+
+# Define the time that all windows monitored for silence should
+# wait before displaying a message. Default 30 seconds.
+ silencewait 15 # default: 30
+
+# bufferfile: The file to use for commands
+# "readbuf" ('<') and "writebuf" ('>'):
+ bufferfile $HOME/.screen_exchange
+#
+# hardcopydir: The directory which contains all hardcopies.
+# hardcopydir ~/.hardcopy
+# hardcopydir ~/.screen
+#
+# shell: Default process started in screen's windows.
+# Makes it possible to use a different shell inside screen
+# than is set as the default login shell.
+# If begins with a '-' character, the shell will be started as a login shell.
+# shell zsh
+# shell bash
+# shell ksh
+ shell -$SHELL
+
+# shellaka '> |tcsh'
+# shelltitle '$ |bash'
+
+# emulate .logout message
+ pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended."
+
+# caption always " %w --- %c:%s"
+# caption always "%3n %t%? @%u%?%? [%h]%?%=%c"
+
+# advertise hardstatus support to $TERMCAP
+# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\'
+
+# set every new windows hardstatus line to somenthing descriptive
+# defhstatus "screen: ^En (^Et)"
+
+# don't kill window after the process died
+# zombie "^["
+
+# ignore displays that block on output
+defnonblock on
+
+# XTERM TWEAKS
+# ===============================================================
+
+# xterm understands both im/ic and doesn't have a status line.
+# Note: Do not specify im and ic in the real termcap/info file as
+# some programs (e.g. vi) will not work anymore.
+ termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
+ terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
+
+# 80/132 column switching must be enabled for ^AW to work
+# change init sequence to not switch width
+ termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l
+
+# Make the output buffer large for (fast) xterms.
+# termcapinfo xterm* OL=10000
+ termcapinfo xterm* OL=100
+
+# tell screen that xterm can switch to dark background and has function
+# keys.
+ termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l'
+ termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~'
+ termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~'
+
+# special xterm hardstatus: use the window title.
+ termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
+
+#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l'
+ termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l'
+
+# emulate part of the 'K' charset
+ termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337'
+
+# xterm-52 tweaks:
+# - uses background color for delete operations
+ termcapinfo xterm* be
+
+# Do not use xterm's alternative window buffer, it breaks scrollback (see bug #61195)
+ termcapinfo xterm|xterms|xs ti@:te=\E[2J
+
+# WYSE TERMINALS
+# ===============================================================
+
+#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff")
+#essential to have it here, as this is a slow terminal.
+ termcapinfo wy75-42 xo:hs@
+
+# New termcap sequences for cursor application mode.
+ termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J
+
+
+# OTHER TERMINALS
+# ===============================================================
+
+# make hp700 termcap/info better
+ termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
+
+# Extend the vt100 desciption by some sequences.
+ termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC
+ terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC
+ termcapinfo linux C8
+# old rxvt versions also need this
+# termcapinfo rxvt C8
+
+
+# KEYBINDINGS
+# ==============================================================
+# The "bind" command assign keys to (internal) commands
+# SCREEN checks all the keys you type; you type the key
+# which is known as the "command character" then SCREEN
+# eats this key, too, and checks whether this key is
+# "bound" to a command. If so then SCREEN will execute it.
+#
+# The command "bind" allows you to chose which keys
+# will be assigned to the commands.
+#
+# Some commands are bound to several keys -
+# usually to both some letter and its corresponding
+# control key combination, eg the command
+# "(create) screen" is bound to both 'c' and '^C'.
+#
+# The following list shows the default bindings:
+#
+# break ^B b
+# clear C
+# colon :
+# copy ^[ [
+# detach ^D d
+# digraph ^V
+# displays *
+# dumptermcap .
+# fit F
+# flow ^F f
+# focus ^I
+# hardcopy h
+# help ?
+# history { }
+# info i
+# kill K k
+# lastmsg ^M m
+# license ,
+# log H
+# login L
+# meta x
+# monitor M
+# next ^@ ^N sp n
+# number N
+# only Q
+# other ^X
+# pow_break B
+# pow_detach D
+# prev ^H ^P p ^?
+# quit \
+# readbuf <
+# redisplay ^L l
+# remove X
+# removebuf =
+# reset Z
+# screen ^C c
+# select " '
+# silence _
+# split S
+# suspend ^Z z
+# time ^T t
+# title A
+# vbell ^G
+# version v
+# width W
+# windows ^W w
+# wrap ^R r
+# writebuf >
+# xoff ^S s
+# xon ^Q q
+# ^] paste .
+# - select -
+# 0 select 0
+# 1 select 1
+# 2 select 2
+# 3 select 3
+# 4 select 4
+# 5 select 5
+# 6 select 6
+# 7 select 7
+# 8 select 8
+# 9 select 9
+# I login on
+# O login off
+# ] paste .
+#
+
+# And here are the default bind commands if you need them:
+#
+# bind A title
+# bind C clear
+# bind D pow_detach
+# bind F fit
+# bind H log
+# bind I login on
+# bind K kill
+# bind L login
+# bind M monitor
+# bind N number
+# bind O login off
+# bind Q only
+# bind S split
+# bind W width
+# bind X remove
+# bind Z reset
+
+# Let's remove some dangerous key bindings ...
+ bind k
+ bind ^k
+# bind . dumptermcap # default
+ bind .
+# bind ^\ quit # default
+ bind ^\
+# bind \\ quit # default
+ bind \\
+# bind ^h ??? # default
+ bind ^h
+# bind h hardcopy # default
+ bind h
+
+# ... and make them better.
+ bind 'K' kill
+ bind 'I' login on
+ bind 'O' login off
+ bind '}' history
+
+# Yet another hack:
+# Prepend/append register [/] to the paste if ^a^] is pressed.
+# This lets me have autoindent mode in vi.
+ register [ "\033:se noai\015a"
+ register ] "\033:se ai\015a"
+ bind ^] paste [.]
+
+
+# hardstatus alwaysignore
+# hardstatus alwayslastline "%Lw"
+
+# Resize the current region. The space will be removed from or added to
+# the region below or if there's not enough space from the region above.
+ bind = resize =
+ bind + resize +3
+ bind - resize -3
+# bind _ resize max
+#
+# attrcolor u "-u b"
+# attrcolor b "R"
+
+# STARTUP SCREENS
+# ===============================================================
+# Defines the time screen delays a new message when one message
+# is currently displayed. The default is 1 second.
+# msgminwait 2
+
+# Time a message is displayed if screen is not disturbed by
+# other activity. The dafault is 5 seconds:
+# msgwait 2
+
+# Briefly show the version number of this starting
+# screen session - but only for *one* second:
+# msgwait 1
+# version
+
+# Welcome the user:
+# echo "welcome :-)"
+# echo "I love you today."
+
+# Uncomment one/some following lines to automatically let
+# SCREEN start some programs in the given window numbers:
+# screen -t MAIL 0 mutt
+# screen -t EDIT 1 vim
+# screen -t GOOGLE 2 links http://www.google.com
+# screen -t NEWS 3 slrn
+# screen -t WWW 4 links http://www.math.fu-berlin.de/~guckes/
+# screen 5
+# screen 6
+
+# Set the environment variable var to value string. If only var is specified,
+# you'll be prompted to enter a value. If no parameters are specified,
+# you'll be prompted for both variable and value. The environment is
+# inherited by all subsequently forked shells.
+# setenv PROMPT_COMMAND 'echo -n -e "\033k\033\134"'
+
+# Don't you want to start programs which need a DISPLAY ?
+# setenv DISPLAY ''
projects / config / samara / etc.git / commitdiff