+++ /dev/null
-# GDM Custom Configuration file.
-#
-# This file is the appropriate place for specifying your customizations to the
-# GDM configuration. If you run gdmsetup, it will automatically edit this
-# file for you and will cause the daemon and any running GDM GUI programs to
-# automatically update with the new configuration. Not all configuration
-# options are supported by gdmsetup, so to modify some values it may be
-# necessary to modify this file directly by hand.
-#
-# This file overrides the default configuration settings. These settings
-# are stored in the GDM System Defaults configuration file, which is found
-# at the following location.
-#
-# /usr/share/gdm/defaults.conf.
-#
-# This file contains comments about the meaning of each configuration option,
-# so is also a useful reference. Also refer to the documentation links at
-# the end of this comment for further information. In short, to hand-edit
-# this file, simply add or modify the key=value combination in the
-# appropriate section in the template below this comment section.
-#
-# For example, if you want to specify a different value for the Enable key
-# in the "[debug]" section of your GDM System Defaults configuration file,
-# then add "Enable=true" in the "[debug]" section of this file. If the
-# key already exists in this file, then simply modify it.
-#
-# Older versions of GDM used the "gdm.conf" file for configuration. If your
-# system has an old gdm.conf file on the system, it will be used instead of
-# this file - so changes made to this file will not take effect. Consider
-# migrating your configuration to this file and removing the gdm.conf file.
-#
-# If you hand edit a GDM configuration file, you can run the following
-# command and the GDM daemon will immediately reflect the change. Any
-# running GDM GUI programs will also be notified to update with the new
-# configuration.
-#
-# gdmflexiserver --command="UPDATE_CONFIG <configuration key>"
-#
-# e.g, the "Enable" key in the "[debug]" section would be "debug/Enable".
-#
-# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and
-# re-read the new configuration settings. You can also restart GDM by sending
-# a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes
-# any user session started by GDM to exit immediately while USR1 behaves like
-# gdm-safe-restart and will wait until all users log out before restarting GDM.
-#
-# For full reference documentation see the gnome help browser under
-# GNOME|System category. You can also find the docs in HTML form on
-# http://www.gnome.org/projects/gdm/
-#
-# NOTE: Lines that begin with "#" are considered comments.
-#
-# Have fun!
-
-[daemon]
-
-[security]
-
-[xdmcp]
-
-[gui]
-
-[greeter]
-
-[chooser]
-
-[debug]
-
-# Note that to disable servers defined in the GDM System Defaults
-# configuration file (such as 0=Standard, you must put a line in this file
-# that says 0=inactive, as described in the Configuration section of the GDM
-# documentation.
-#
-[servers]
-
-# Also note, that if you redefine a [server-foo] section, then GDM will
-# use the definition in this file, not the GDM System Defaults configuration
-# file. It is currently not possible to disable a [server-foo] section
-# defined in the GDM System Defaults configuration file.
-#
--- /dev/null
+# GDM Custom Configuration file.
+#
+# This file is the appropriate place for specifying your customizations to the
+# GDM configuration. If you run gdmsetup, it will automatically edit this
+# file for you and will cause the daemon and any running GDM GUI programs to
+# automatically update with the new configuration. Not all configuration
+# options are supported by gdmsetup, so to modify some values it may be
+# necessary to modify this file directly by hand.
+#
+# This file overrides the default configuration settings. These settings
+# are stored in the GDM System Defaults configuration file, which is found
+# at the following location.
+#
+# /usr/share/gdm/defaults.conf.
+#
+# This file contains comments about the meaning of each configuration option,
+# so is also a useful reference. Also refer to the documentation links at
+# the end of this comment for further information. In short, to hand-edit
+# this file, simply add or modify the key=value combination in the
+# appropriate section in the template below this comment section.
+#
+# For example, if you want to specify a different value for the Enable key
+# in the "[debug]" section of your GDM System Defaults configuration file,
+# then add "Enable=true" in the "[debug]" section of this file. If the
+# key already exists in this file, then simply modify it.
+#
+# Older versions of GDM used the "gdm.conf" file for configuration. If your
+# system has an old gdm.conf file on the system, it will be used instead of
+# this file - so changes made to this file will not take effect. Consider
+# migrating your configuration to this file and removing the gdm.conf file.
+#
+# If you hand edit a GDM configuration file, you can run the following
+# command and the GDM daemon will immediately reflect the change. Any
+# running GDM GUI programs will also be notified to update with the new
+# configuration.
+#
+# gdmflexiserver --command="UPDATE_CONFIG <configuration key>"
+#
+# e.g, the "Enable" key in the "[debug]" section would be "debug/Enable".
+#
+# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and
+# re-read the new configuration settings. You can also restart GDM by sending
+# a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes
+# any user session started by GDM to exit immediately while USR1 behaves like
+# gdm-safe-restart and will wait until all users log out before restarting GDM.
+#
+# For full reference documentation see the gnome help browser under
+# GNOME|System category. You can also find the docs in HTML form on
+# http://www.gnome.org/projects/gdm/
+#
+# NOTE: Lines that begin with "#" are considered comments.
+#
+# Have fun!
+
+[daemon]
+
+
+Greeter=/usr/libexec/gdmlogin
+
+
+
+[security]
+
+RelaxPermissions=1
+
+
+[xdmcp]
+
+[gui]
+
+[greeter]
+
+
+
+
+
+
+
+
+
+
+GraphicalTheme=GDM-puesta_de_sol
+
+Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,postgres,pvm,rpm,nfsnobody,pcap,thomas
+
+
+
+
+
+Browser=true
+
+
+
+BackgroundType=1
+
+BackgroundImage=/usr/share/pixmaps/backgrounds/gnome/nature/Storm.jpg
+
+
+
+BackgroundColor=#3574a6
+
+Logo=/usr/share/pixmaps/gnome-background-image.png
+
+
+ChooserButton=false
+
+
+
+
+
+
+
+
+DefaultFace=
+
+GlobalFaceDir=/usr/share/pixmaps/
+
+
+
+
+IncludeAll=false
+
+Include=doris,patrick,heiko,frank,robert,steffen
+
+SoundOnLoginFile=/usr/share/sounds/startup3.wav
+
+[chooser]
+
+[debug]
+
+# Note that to disable servers defined in the GDM System Defaults
+# configuration file (such as 0=Standard, you must put a line in this file
+# that says 0=inactive, as described in the Configuration section of the GDM
+# documentation.
+#
+
+[servers]
+
+# Also note, that if you redefine a [server-foo] section, then GDM will
+# use the definition in this file, not the GDM System Defaults configuration
+# file. It is currently not possible to disable a [server-foo] section
+# defined in the GDM System Defaults configuration file.
+#
--- /dev/null
+# GDM Custom Configuration file.
+#
+# This file is the appropriate place for specifying your customizations to the
+# GDM configuration. If you run gdmsetup, it will automatically edit this
+# file for you and will cause the daemon and any running GDM GUI programs to
+# automatically update with the new configuration. Not all configuration
+# options are supported by gdmsetup, so to modify some values it may be
+# necessary to modify this file directly by hand.
+#
+# This file overrides the default configuration settings. These settings
+# are stored in the GDM System Defaults configuration file, which is found
+# at the following location.
+#
+# /usr/share/gdm/defaults.conf.
+#
+# This file contains comments about the meaning of each configuration option,
+# so is also a useful reference. Also refer to the documentation links at
+# the end of this comment for further information. In short, to hand-edit
+# this file, simply add or modify the key=value combination in the
+# appropriate section in the template below this comment section.
+#
+# For example, if you want to specify a different value for the Enable key
+# in the "[debug]" section of your GDM System Defaults configuration file,
+# then add "Enable=true" in the "[debug]" section of this file. If the
+# key already exists in this file, then simply modify it.
+#
+# Older versions of GDM used the "gdm.conf" file for configuration. If your
+# system has an old gdm.conf file on the system, it will be used instead of
+# this file - so changes made to this file will not take effect. Consider
+# migrating your configuration to this file and removing the gdm.conf file.
+#
+# If you hand edit a GDM configuration file, you can run the following
+# command and the GDM daemon will immediately reflect the change. Any
+# running GDM GUI programs will also be notified to update with the new
+# configuration.
+#
+# gdmflexiserver --command="UPDATE_CONFIG <configuration key>"
+#
+# e.g, the "Enable" key in the "[debug]" section would be "debug/Enable".
+#
+# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and
+# re-read the new configuration settings. You can also restart GDM by sending
+# a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes
+# any user session started by GDM to exit immediately while USR1 behaves like
+# gdm-safe-restart and will wait until all users log out before restarting GDM.
+#
+# For full reference documentation see the gnome help browser under
+# GNOME|System category. You can also find the docs in HTML form on
+# http://www.gnome.org/projects/gdm/
+#
+# NOTE: Lines that begin with "#" are considered comments.
+#
+# Have fun!
+
+[daemon]
+
+[security]
+
+[xdmcp]
+
+[gui]
+
+[greeter]
+
+[chooser]
+
+[debug]
+
+# Note that to disable servers defined in the GDM System Defaults
+# configuration file (such as 0=Standard, you must put a line in this file
+# that says 0=inactive, as described in the Configuration section of the GDM
+# documentation.
+#
+[servers]
+
+# Also note, that if you redefine a [server-foo] section, then GDM will
+# use the definition in this file, not the GDM System Defaults configuration
+# file. It is currently not possible to disable a [server-foo] section
+# defined in the GDM System Defaults configuration file.
+#
projects / config / bruni / etc.git / commitdiff