# The documentation is always available at
# http://httpd.apache.org/docs/2.2/
<IfDefine MANUAL>
-AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.24/manual$1"
+AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.25/manual$1"
-<Directory "/usr/share/doc/apache-2.2.24/manual">
+<Directory "/usr/share/doc/apache-2.2.25/manual">
Options Indexes
AllowOverride None
Order allow,deny
-# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd-2.1.21.conf,v 1.2 2007/04/07 13:03:55 chtekk Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd-2.1.26.conf,v 1.1 2013/07/13 12:01:10 pacho Exp $
-# Config file for /etc/init.d/saslauthd
+# Config file for /etc/init.d/saslauthd and systemd unit
-# Initial (empty) options.
-SASLAUTHD_OPTS=""
+# PLEASE READ THIS IF YOU ARE USING SYSTEMD
+# Please note that systemd does not expand shell variables
+# thus, something like FOO="${FOO} bar" won't work.
# Specify the authentications mechanism.
# **NOTE** For a list see: saslauthd -v
# Since 2.1.19, add "-r" to options for old behavior,
# ie. reassemble user and realm to user@realm form.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -a pam -r"
-SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -a pam"
-
-# Specify the hostname for remote IMAP server.
-# **NOTE** Only needed if rimap auth mechanism is used.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -O localhost"
-
-# Specify the number of worker processes to create.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -n 5"
-
-# Enable credential cache, set cache size and timeout.
-# **NOTE** Size is measured in kilobytes.
-# Timeout is measured in seconds.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -c -s 128 -t 30"
+#
+# Specify the hostname for remote IMAP server using:
+# "-O localhost".
+# Specify the number of worker processes to create using:
+# "-n <N>".
+# Enable credential cache, set cache size and timeout using:
+# "-c -s <cache size, like 128> -t <timeout seconds>".
+#
+SASLAUTHD_OPTS="-a pam"
# Config file for /etc/init.d/syslog-ng
+# If you are not using network logging, this entire section should be
+# commented out. Otherwise, choose one of the settings below based on
+# how you are configuring your network.
+#
+# If you are using the net.* scripts to configure your network, you should
+# set rc_need to match the interface through which your logging server
+# can be reached.
+#rc_need="net.eth0"
+#
+# If you are using an interface manager like wicd, dhcpcd in standalone
+# mode, networkmanager, etc to control your interfaces, set rc_need to
+# the name of that service.
+# rc_need="dhcpcd"
+#rc_need="networkmanager"
+#
+# If you are using newnet and configuring your interface statically with
+# the network script, you should use this setting.
+#rc_need="network"
+#
+# You can use this setting, but I do not recommend relying on it.
+#rc_need="net"
+#
+# You may also want to uncomment the following if you are using network
+# logging.
+#rc_use="stunnel"
+
+# For very customized setups these variables can be adjusted as needed
+# but for most situations they should remain commented:
+# SYSLOG_NG_CONFIGFILE=/etc/syslog-ng/syslog-ng.conf
+# SYSLOG_NG_STATEFILE_DIR=/var/lib/syslog-ng
+# SYSLOG_NG_STATEFILE=${SYSLOG_NG_STATEFILE_DIR}/syslog-ng.persist
+# SYSLOG_NG_PIDFILE_DIR=/var/run
+# SYSLOG_NG_PIDFILE=${SYSLOG_NG_PIDFILE_DIR}/syslog-ng.pid
+# SYSLOG_NG_GROUP=root
+# SYSLOG_NG_USER=root
+
# Put any additional options for syslog-ng here.
# See syslog-ng(8) for more information.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.5/html
+html_directory = /usr/share/doc/postfix-2.10.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.5/readme
+readme_directory = /usr/share/doc/postfix-2.10.0/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.3/html
+html_directory = /usr/share/doc/postfix-2.9.4/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.3/readme
+readme_directory = /usr/share/doc/postfix-2.9.4/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = /usr/lib64/postfix
+daemon_directory = /usr/libexec/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
-#mailbox_transport = lmtp:unix:/file/name
+# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
+# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
+#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
+#
+# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
+# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.9/html
+html_directory = /usr/share/doc/postfix-2.9.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.9/readme
+readme_directory = /usr/share/doc/postfix-2.9.3/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = //usr/lib64/postfix
+daemon_directory = /usr/lib64/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
--- /dev/null
+# vim: noai: filetype=pfmain ts=4 sw=4
+
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = //usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.9/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
+home_mailbox = .maildir/
+#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
+alias_maps = hash:/etc/postfix/maps/aliases
+anvil_status_update_time = 3600s
+body_checks = pcre:/etc/postfix/maps/body_checks
+bounce_template_file = /etc/postfix/bounce-templates/bounce.de-DE.cf
+broken_sasl_auth_clients = yes
+#canonical_maps = mysql:/etc/postfix/mysql-canonical.cf
+canonical_maps = hash:/etc/postfix/maps/canonical
+cyrus_sasl_config_path = /etc/sasl2
+default_destination_concurrency_limit = 5
+header_checks = pcre:/etc/postfix/maps/header_checks
+inet_protocols = all
+local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname
+mail_spool_directory = /var/spool/mail
+mailbox_size_limit = 512000000
+message_size_limit = 51200000
+#mydestination = $myhostname, $mydomain, mysql:/etc/postfix/mysql-mydomains.cf
+mydestination = $myhostname, $mydomain, hash:/etc/postfix/maps/mydomains
+mydomain = brehm-online.com
+myhostname = helga.brehm-online.com
+mynetworks = 127.0.0.0/8 85.214.134.152/32 85.214.109.1/32 [::1]/128 [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]/128
+mynetworks_style = host
+myorigin = $mydomain
+#recipient_bcc_maps = mysql:/etc/postfix/mysql-recipient_bcc.cf
+recipient_bcc_maps = hash:/etc/postfix/maps/recipient_bcc
+#relay_clientcerts = hash:/etc/postfix/relay_clientcerts
+relay_clientcerts = hash:/etc/postfix/maps/relay_clientcerts
+#relay_domains = mysql:/etc/postfix/mysql-relay-domains.cf
+relay_domains = hash:/etc/postfix/maps/relay_domains
+#relocated_maps = mysql:/etc/postfix/mysql-relocated.cf
+relocated_maps = hash:/etc/postfix/maps/relocated
+#sender_bcc_maps = mysql:/etc/postfix/mysql-sender_bcc.cf
+sender_bcc_maps = hash:/etc/postfix/maps/sender_bcc
+smtp_generic_maps = hash:/etc/postfix/maps/generic
+smtp_tls_CAfile = /etc/ssl/CA-Brehm/cacert.pem
+smtp_tls_cert_file = /etc/postfix/postfix.pem
+smtp_tls_enforce_peername = no
+smtp_use_tls = yes
+smtpd_banner = $myhostname ESMTP Frank Brehms Mail Service $mail_name ($mail_version)
+
+smtpd_recipient_restrictions =
+ check_client_access cidr:/etc/postfix/maps/access_client,
+ check_recipient_access hash:/etc/postfix/maps/access_recipient,
+ check_helo_access hash:/etc/postfix/maps/access_helo,
+ check_sender_access hash:/etc/postfix/maps/access_sender,
+ reject_non_fqdn_recipient,
+ reject_unknown_recipient_domain,
+ reject_non_fqdn_sender,
+ reject_unknown_sender_domain,
+ reject_invalid_helo_hostname,
+ permit_mynetworks,
+ permit_sasl_authenticated,
+ permit_tls_clientcerts,
+ reject_rbl_client zen.spamhaus.org,
+ reject_rbl_client ix.dnsbl.manitu.net,
+ check_policy_service unix:private/postgrey,
+ check_policy_service inet:127.0.0.1:12525,
+ reject_unverified_recipient,
+ permit_mx_backup,
+ reject_unauth_destination,
+ permit
+
+smtpd_sasl_auth_enable = yes
+smtpd_tls_CAfile = $smtp_tls_CAfile
+smtpd_tls_cert_file = $smtp_tls_cert_file
+smtpd_tls_key_file = $smtp_tls_cert_file
+smtpd_tls_loglevel = 1
+smtpd_tls_received_header = yes
+smtpd_use_tls = yes
+transport_maps = hash:/etc/postfix/maps/transport
+#virtual_alias_domains = mysql:/etc/postfix/mysql-virtual-alias-domains.cf
+virtual_alias_domains = hash:/etc/postfix/maps/virtual_alias_domains
+#virtual_alias_maps = mysql:/etc/postfix/mysql-virtual.cf
+virtual_alias_maps = hash:/etc/postfix/maps/virtual_alias_maps
+virtual_gid_maps = static:1023
+virtual_mailbox_base = /
+#virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
+virtual_mailbox_domains = hash:/etc/postfix/maps/virtual_mailbox_domains
+virtual_mailbox_limit = 512000000
+#virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-maps.cf
+virtual_mailbox_maps = hash:/etc/postfix/maps/virtual_mailbox_maps
+virtual_uid_maps = static:1023
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
-smtpd_relay_restrictions = permit_mynetworks,permit_sasl_authenticated,defer_unauth_destination
--- /dev/null
+# Sample configuration file for smartd. See man smartd.conf.
+
+# Home page is: http://smartmontools.sourceforge.net
+
+# $Id: smartd.conf 3128 2010-07-27 13:08:31Z chrfranke $
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices. DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found. Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+DEVICESCAN
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
+/dev/sda -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+/dev/sdb -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/hdb -H -l error -l selftest -t -I 194
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check. Only report SMART health status if it fails
+# But send an email in this case
+#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks. This will monitor everything that smartd can
+# monitor. Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED. Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am.
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+# -T TYPE set the tolerance to one of: normal, permissive
+# -o VAL Enable/disable automatic offline tests (on/off)
+# -S VAL Enable/disable attribute autosave (on/off)
+# -n MODE No check. MODE is one of: never, sleep, standby, idle
+# -H Monitor SMART Health Status, report if failed
+# -l TYPE Monitor SMART log. Type is one of: error, selftest
+# -f Monitor for failure of any 'Usage' Attributes
+# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
+# -M TYPE Modify email warning behavior (see man page)
+# -s REGE Start self-test when type/date matches regular expression (see man page)
+# -p Report changes in 'Prefailure' Normalized Attributes
+# -u Report changes in 'Usage' Normalized Attributes
+# -t Equivalent to -p and -u Directives
+# -r ID Also report Raw values of Attribute ID with -p, -u or -t
+# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
+# -i ID Ignore Attribute ID for -f Directive
+# -I ID Ignore Attribute ID for -p, -u or -t Directive
+# -C ID Report if Current Pending Sector count non-zero
+# -U ID Report if Offline Uncorrectable count non-zero
+# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+# -v N,ST Modifies labeling of Attribute N (see man page)
+# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+# -P TYPE Drive-specific presets: use, ignore, show, showall
+# # Comment: text after a hash sign is ignored
+# \ Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# DEVICESCAN may be followed by any desired Directives.
--- /dev/null
+# Sample configuration file for smartd. See man smartd.conf.
+
+# Home page is: http://smartmontools.sourceforge.net
+
+# $Id: smartd.conf 3651 2012-10-18 15:11:36Z samm2 $
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices. DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found. Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+DEVICESCAN
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/hdb -H -l error -l selftest -t -I 194
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check. Only report SMART health status if it fails
+# But send an email in this case
+#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks. This will monitor everything that smartd can
+# monitor. Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED. Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+# On FreeBSD /dev/tws0 should be used instead
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am.
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+# -T TYPE set the tolerance to one of: normal, permissive
+# -o VAL Enable/disable automatic offline tests (on/off)
+# -S VAL Enable/disable attribute autosave (on/off)
+# -n MODE No check. MODE is one of: never, sleep, standby, idle
+# -H Monitor SMART Health Status, report if failed
+# -l TYPE Monitor SMART log. Type is one of: error, selftest
+# -f Monitor for failure of any 'Usage' Attributes
+# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
+# -M TYPE Modify email warning behavior (see man page)
+# -s REGE Start self-test when type/date matches regular expression (see man page)
+# -p Report changes in 'Prefailure' Normalized Attributes
+# -u Report changes in 'Usage' Normalized Attributes
+# -t Equivalent to -p and -u Directives
+# -r ID Also report Raw values of Attribute ID with -p, -u or -t
+# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
+# -i ID Ignore Attribute ID for -f Directive
+# -I ID Ignore Attribute ID for -p, -u or -t Directive
+# -C ID Report if Current Pending Sector count non-zero
+# -U ID Report if Offline Uncorrectable count non-zero
+# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+# -v N,ST Modifies labeling of Attribute N (see man page)
+# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+# -P TYPE Drive-specific presets: use, ignore, show, showall
+# # Comment: text after a hash sign is ignored
+# \ Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# DEVICESCAN may be followed by any desired Directives.
-@version: 3.2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3.2,v 1.1 2011/01/18 17:44:14 mr_bones_ Exp $
+@version: 3.4
+# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/3.4/syslog-ng.conf.gentoo,v 1.2 2013/06/02 01:18:35 mr_bones_ Exp $
#
# Syslog-ng default configuration file for Gentoo Linux
+# https://bugs.gentoo.org/show_bug.cgi?id=426814
+@include "scl.conf"
+
options {
+ threaded(yes);
chain_hostnames(no);
# The default action of syslog-ng is to log a STATS line
mark_freq(3600);
};
-source src {
- unix-stream("/dev/log" max-connections(256));
- internal();
- file("/proc/kmsg");
-};
+source src { system(); internal(); };
destination messages { file("/var/log/messages"); };
setenv GSETTINGS_BACKEND 'gconf'
setenv GUILE_LOAD_PATH '/usr/share/guile/1.8'
setenv HG '/usr/bin/hg'
-setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
+setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/info'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
setenv MULTIOSDIRS '../lib64:../lib32'
setenv OPENGL_PROFILE 'xorg-x11'
setenv PAGER '/usr/bin/less'
setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
+setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so'
setenv PYTHONDOCS_2_7 '/usr/share/doc/python-docs-2.7.3/html/library'
setenv PYTHONDOCS_3_2 '/usr/share/doc/python-docs-3.2.3/html/library'
setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
-MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man
-INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info
+MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/man
+INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/info
--- /dev/null
+PRELINK_PATH_MASK=/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so
-CURRENT=2.22
+CURRENT=2.23.1
+++ /dev/null
-TARGET="x86_64-pc-linux-gnu"
-VER="2.22"
-LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.22"
-FAKE_TARGETS="x86_64-pc-linux-gnu"
--- /dev/null
+TARGET="x86_64-pc-linux-gnu"
+VER="2.23.1"
+LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.23.1"
+FAKE_TARGETS="x86_64-pc-linux-gnu"
#!/sbin/runscript
-# $Header: /var/cvsroot/gentoo-x86/net-misc/memcached/files/1.3.3/init,v 1.2 2011/12/31 20:36:20 idl0r Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-misc/memcached/files/1.3.3/init,v 1.3 2012/12/23 18:05:21 robbat2 Exp $
CONF="${SVCNAME#*.}"
CONFBASE="/etc/conf.d/memcached"
[ -z "${PIDBASE}" ] && PIDBASE="/var/run/memcached/memcached"
-[ "${CONF}" == "memcached" ] && CONF=''
+[ "${CONF}" = "memcached" ] && CONF=''
if [ -n "${CONF}" ]; then
PIDFILE="${PIDBASE}-${PORT}.${CONF}.pid"
CONFSRC="${CONFBASE}.${CONF}"
if [ -f "${CONFSRC}" ]; then
- source "${CONFSRC}"
+ . "${CONFSRC}"
else
eerror "The configuration file $CONFSRC was not found!"
fi
#!/sbin/runscript
-# Copyright 1999-2007 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd2.rc6,v 1.7 2007/04/07 13:03:55 chtekk Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd2.rc7,v 1.1 2013/07/13 12:01:10 pacho Exp $
depend() {
need net
stop() {
ebegin "Stopping saslauthd"
- start-stop-daemon --stop --quiet --pidfile /var/lib/sasl2/saslauthd.pid
+ start-stop-daemon --stop --quiet --pidfile /run/saslauthd/saslauthd.pid
eend $?
}
#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.rc6.3,v 1.5 2011/12/04 09:53:39 swegener Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/3.4/syslog-ng.rc6,v 1.5 2013/05/08 20:12:59 mr_bones_ Exp $
+SYSLOG_NG_CONFIGFILE=${SYSLOG_NG_CONFIGFILE:-/etc/syslog-ng/${RC_SVCNAME}.conf}
+SYSLOG_NG_STATEFILE_DIR=${SYSLOG_NG_STATEFILE_DIR:-/var/lib/syslog-ng}
+SYSLOG_NG_STATEFILE=${SYSLOG_NG_STATEFILE:-${SYSLOG_NG_STATEFILE_DIR}/syslog-ng.persist}
+SYSLOG_NG_PIDFILE_DIR=${SYSLOG_NG_PIDFILE_DIR:-/var/run}
+SYSLOG_NG_PIDFILE=${SYSLOG_NG_PIDFILE:-${SYSLOG_NG_PIDFILE_DIR}/${RC_SVCNAME}.pid}
+
+SYSLOG_NG_GROUP=${SYSLOG_NG_GROUP:-root}
+SYSLOG_NG_USER=${SYSLOG_NG_USER:-root}
+
+command="syslog-ng"
+command_args="--persist-file \"${SYSLOG_NG_STATEFILE}\" --cfgfile \"${SYSLOG_NG_CONFIGFILE}\" --pidfile \"${SYSLOG_NG_PIDFILE}\" ${SYSLOG_NG_OPTS}"
extra_commands="checkconfig"
extra_started_commands="reload"
+pidfile="${SYSLOG_NG_PIDFILE}"
+start_stop_daemon_args="--user \"${SYSLOG_NG_USER}\":\"${SYSLOG_NG_GROUP}\""
+description="Syslog-ng is a syslog replacement with advanced filtering features."
+description_checkconfig="Check the configuration file that will be used by \"start\""
+description_reload="Reload the configuration without exiting"
+required_files="${SYSLOG_NG_CONFIGFILE}"
+required_dirs="${SYSLOG_NG_PIDFILE_DIR}"
depend() {
- # Make networking dependency conditional on configuration
- case $(sed 's/#.*//' /etc/syslog-ng/syslog-ng.conf) in
- *source*tcp*|*source*udp*|*destination*tcp*|*destination*udp*)
- need net
- use stunnel ;;
- esac
-
- config /etc/syslog-ng/syslog-ng.conf
use clock
need hostname localmount
+ after bootmisc
provide logger
}
checkconfig() {
- if [ ! -e /etc/syslog-ng/syslog-ng.conf ] ; then
- eerror "You need to create /etc/syslog-ng/syslog-ng.conf first."
- eerror "An example can be found in /etc/syslog-ng/syslog-ng.conf.sample"
- return 1
- fi
- syslog-ng -s -f /etc/syslog-ng/syslog-ng.conf
-
- # the start and reload functions have their own eends so
- # avoid calling this twice when there are no problems
- [ $? -eq 0 ] || eend $? "Configuration error. Please fix your configfile (/etc/syslog-ng/syslog-ng.conf)"
+ ebegin "Checking your configfile (${SYSLOG_NG_CONFIGFILE})"
+ syslog-ng -s -f "${SYSLOG_NG_CONFIGFILE}"
+ eend $? "Configuration error. Please fix your configfile (${SYSLOG_NG_CONFIGFILE})"
}
-start() {
- checkconfig || return 1
- ebegin "Starting syslog-ng"
- [ -n "${SYSLOG_NG_OPTS}" ] && SYSLOG_NG_OPTS="-- ${SYSLOG_NG_OPTS}"
- start-stop-daemon --start --pidfile /var/run/syslog-ng.pid --exec /usr/sbin/syslog-ng ${SYSLOG_NG_OPTS}
- eend $? "Failed to start syslog-ng"
+start_pre() {
+ checkconfig || return 1
+ checkpath \
+ -d \
+ --mode 0700 \
+ --owner "${SYSLOG_NG_OWNER}:${SYSLOG_NG_GROUP}" \
+ "${SYSLOG_NG_STATEFILE_DIR}"
}
-stop() {
- ebegin "Stopping syslog-ng"
- start-stop-daemon --stop --pidfile /var/run/syslog-ng.pid
- eend $? "Failed to stop syslog-ng"
- sleep 1 # needed for syslog-ng to stop in case we're restarting
+stop_pre() {
+ [ "$RC_CMD" = restart ] && sleep 1
+ return 0
}
reload() {
- if [ ! -f /var/run/syslog-ng.pid ]; then
- eerror "syslog-ng isn't running"
- return 1
- fi
checkconfig || return 1
ebegin "Reloading configuration and re-opening log files"
- start-stop-daemon --signal HUP \
- --pidfile /var/run/syslog-ng.pid
+ start-stop-daemon --signal HUP --pidfile "${pidfile}"
eend $?
}
-Subproject commit ea7c16832d2f390aadd69dceed7a12fc8af754a7
+Subproject commit 7c6b4fd6b1c95c9924891097a64759098ea5d35b
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
export GSETTINGS_BACKEND='gconf'
export GUILE_LOAD_PATH='/usr/share/guile/1.8'
export HG='/usr/bin/hg'
-export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/info'
+export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/info'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.22/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.6.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.1/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.4/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.2/man/'
export MULTIOSDIRS='../lib64:../lib32'
export OPENGL_PROFILE='xorg-x11'
export PAGER='/usr/bin/less'
export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
+export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so'
export PYTHONDOCS_2_7='/usr/share/doc/python-docs-2.7.3/html/library'
export PYTHONDOCS_3_2='/usr/share/doc/python-docs-3.2.3/html/library'
export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.6.3:/usr/lib64/subversion/bin'
-SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.12.5"
+SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.12.6"
# Home page is: http://smartmontools.sourceforge.net
-# $Id: smartd.conf 3128 2010-07-27 13:08:31Z chrfranke $
+# $Id: smartd.conf 3651 2012-10-18 15:11:36Z samm2 $
# smartd will re-read the configuration file if it receives a HUP
# signal
#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
-# uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
# between 1-2 and 3-4 am.
+# On FreeBSD /dev/tws0 should be used instead
#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
-#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
# Same as above for Windows. Option '-d 3ware,N' is not necessary,
# disk (port) number is specified in device name.
--- /dev/null
+#! /bin/sh
+#
+# smartd warning script
+#
+# Copyright (C) 2012-13 Christian Franke <smartmontools-support@lists.sourceforge.net>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# You should have received a copy of the GNU General Public License
+# (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
+#
+# $Id: smartd_warning.sh.in 3784 2013-03-06 22:02:54Z chrfranke $
+#
+
+set -e
+
+# Set by config.status
+PACKAGE="smartmontools"
+VERSION="6.1"
+prefix="/usr"
+sysconfdir="/etc"
+
+# Default mailer
+os_mailer="mail"
+
+# Plugin directory
+plugindir="$sysconfdir/smartd_warning.d"
+
+# Parse options
+dryrun=
+case $1 in
+ --dryrun) dryrun=t; shift ;;
+esac
+
+if [ $# != 0 ]; then
+ cat <<EOF
+smartd $VERSION warning message script
+
+Usage:
+ export SMARTD_MAILER='Path to external script, empty for "$os_mailer"'
+ export SMARTD_ADDRESS='Space separated mail adresses, empty if none'
+ export SMARTD_MESSAGE='Error Message'
+ export SMARTD_FAILTYPE='Type of failure, "EMailTest" for tests'
+ export SMARTD_TFIRST='Date of first message sent, empty if none'
+ export SMARTD_TFIRSTEPOCH='time_t format of above'
+ export SMARTD_PREVCNT='Number of previous messages, 0 if none'
+ export SMARTD_NEXTDAYS='Number of days until next message, empty if none'
+ export SMARTD_DEVICEINFO='Device identify information'
+ #export SMARTD_DEVICE='Device name'
+ #export SMARTD_DEVICESTRING='Annotated device name'
+ #export SMARTD_DEVICETYPE='Device type from -d directive, "auto" if none'
+ $0 [--dryrun]
+EOF
+ exit 1
+fi
+
+if [ -z "${SMARTD_ADDRESS}${SMARTD_MAILER}" ]; then
+ echo "$0: SMARTD_ADDRESS or SMARTD_MAILER must be set" >&2
+ exit 1
+fi
+
+# Get host and domain names
+for cmd in 'hostname' 'uname -n' 'echo "${HOSTNAME?unset}"' 'echo "[Unknown]"'; do
+ hostname=`eval $cmd 2>/dev/null` || continue
+ test -n "$hostname" || continue
+ break
+done
+
+dnsdomain=${hostname#*.}
+if [ "$dnsdomain" != "$hostname" ]; then
+ # BSD 'hostname' prints FQDN
+ hostname=${hostname%%.*}
+else
+ # Linux Cygwin
+ for cmd in 'dnsdomainname' 'echo "${USERDNSDOMAIN?unset}"' 'echo'; do
+ dnsdomain=`eval $cmd 2>/dev/null` || continue
+ break
+ done
+fi
+
+for cmd in 'nisdomainname' 'ypdomainname' 'domainname' 'echo'; do
+ nisdomain=`eval $cmd 2>/dev/null` || continue
+ break
+done
+test "$nisdomain" != "(none)" || nisdomain=
+
+case $OS in
+ Windows*) windomain=$USERDOMAIN ;;
+ *) windomain= ;;
+esac
+
+# Format subject
+export SMARTD_SUBJECT="SMART error (${SMARTD_FAILTYPE-[SMARTD_FAILTYPE]}) detected on host: $hostname"
+
+# Format message
+fullmessage=`
+ echo "This message was generated by the smartd daemon running on:"
+ echo
+ echo " host name: $hostname"
+ echo " DNS domain: ${dnsdomain:-[Empty]}"
+ test -z "$nisdomain" ||
+ echo " NIS domain: $nisdomain"
+ test -z "$windomain" ||
+ echo " Win domain: $windomain"
+ echo
+ echo "The following warning/error was logged by the smartd daemon:"
+ echo
+ echo "${SMARTD_MESSAGE-[SMARTD_MESSAGE]}"
+ echo
+ echo "Device info:"
+ echo "${SMARTD_DEVICEINFO-[SMARTD_DEVICEINFO]}"
+ echo
+ echo "For details see host's SYSLOG."
+ if [ "$SMARTD_FAILTYPE" != "EmailTest" ]; then
+ echo
+ echo "You can also use the smartctl utility for further investigation."
+ test "$SMARTD_PREVCNT" = "0" ||
+ echo "The original message about this issue was sent at ${SMARTD_TFIRST-[SMARTD_TFIRST]}"
+ case $SMARTD_NEXTDAYS in
+ '') echo "No additional messages about this problem will be sent." ;;
+ 1) echo "Another message will be sent in 24 hours if the problem persists." ;;
+ *) echo "Another message will be sent in $SMARTD_NEXTDAYS days if the problem persists." ;;
+ esac
+ fi
+`
+
+# Export message with trailing newline
+export SMARTD_FULLMESSAGE="$fullmessage
+"
+
+# Run plugin scripts if requested
+case " $SMARTD_ADDRESS" in
+ *\ @*)
+ if [ -n "$dryrun" ]; then
+ echo "export SMARTD_SUBJECT='$SMARTD_SUBJECT'"
+ echo "export SMARTD_FULLMESSAGE='$SMARTD_FULLMESSAGE'"
+ fi
+
+ # Run ALL scripts if requested
+ case " $SMARTD_ADDRESS " in
+ *\ @ALL\ *)
+ for cmd in "$plugindir"/*; do
+ if [ -f "$cmd" ] && [ -x "$cmd" ]; then
+ if [ -n "$dryrun" ]; then
+ echo "$cmd </dev/null"
+ else
+ "$cmd" </dev/null
+ fi
+ fi
+ done
+ ;;
+ esac
+
+ # Run selected scripts
+ addrs=$SMARTD_ADDRESS
+ SMARTD_ADDRESS=
+ for ad in $addrs; do
+ case $ad in
+ @ALL)
+ ;;
+ @?*)
+ cmd="$plugindir/${ad#@}"
+ if [ -f "$cmd" ] && [ -x "$cmd" ]; then
+ if [ -n "$dryrun" ]; then
+ echo "$cmd </dev/null"
+ else
+ "$cmd" </dev/null
+ fi
+ elif [ ! -e "$cmd" ]; then
+ echo "$cmd: Not found" >&2
+ fi
+ ;;
+ *)
+ SMARTD_ADDRESS="${SMARTD_ADDRESS:+ }$ad"
+ ;;
+ esac
+ done
+
+ # Send email to remaining addresses
+ test -n "$SMARTD_ADDRESS" || exit 0
+ ;;
+esac
+
+# Send mail or run command
+if [ -n "$SMARTD_ADDRESS" ]; then
+
+ # Send mail, use platform mailer by default
+ test -n "$SMARTD_MAILER" || SMARTD_MAILER=$os_mailer
+ if [ -n "$dryrun" ]; then
+ echo "exec '$SMARTD_MAILER' -s '$SMARTD_SUBJECT' $SMARTD_ADDRESS <<EOF
+$fullmessage
+EOF"
+ else
+ exec "$SMARTD_MAILER" -s "$SMARTD_SUBJECT" $SMARTD_ADDRESS <<EOF
+$fullmessage
+EOF
+ fi
+
+elif [ -n "$SMARTD_MAILER" ]; then
+
+ # Run command
+ if [ -n "$dryrun" ]; then
+ echo "export SMARTD_SUBJECT='$SMARTD_SUBJECT'"
+ echo "export SMARTD_FULLMESSAGE='$SMARTD_FULLMESSAGE'"
+ echo "exec '$SMARTD_MAILER' </dev/null"
+ else
+ unset SMARTD_ADDRESS
+ exec "$SMARTD_MAILER" </dev/null
+ fi
+
+fi
+++ /dev/null
-#############################################################################
-#
-# Default modules.conf file for syslog-ng which lists all modules loaded on
-# startup by default. This file is included by scl, but can be used by
-# including the file directly and avoiding scl.conf entirely.
-#
-# SCL plugins will not emit @module lines for modules listed here (but may
-# do so for other non-listed stuff).
-#
-
-# syslog-ng loads all compile-time configured modules by default, unless
-# autoload-compiled-modules is set to 0.
-#
-# The next line in this file sets this value to 0, and only loads a selected
-# set of modules as assumed by SCL. So if you don't really want control
-# over the modules loaded, simply don't include this file.
-
-@define autoload-compiled-modules 0
-@module syslogformat
-@module basicfuncs
-@module afsocket
-@module affile
-@module afprog
-@module afuser
-@module dbparser
-@module csvparser
-
-### afstreams is auto-loaded by the system() source if needed
-#@module afstreams
-
-### afsql is not loaded by default
-#@module afsql
#############################################################################
-# Copyright (c) 2010 BalaBit IT Ltd, Budapest, Hungary
+# Copyright (c) 2010-2012 BalaBit IT Ltd, Budapest, Hungary
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation, or (at your option) any later version.
#
-# As an additional exemption you are allowed to compile & link against the
-# OpenSSL libraries as published by the OpenSSL project. See the file
-# COPYING for details.
-#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
+# As an additional exemption you are allowed to compile & link against the
+# OpenSSL libraries as published by the OpenSSL project. See the file
+# COPYING for details.
+#
#############################################################################
#
# This file is placed into /etc/syslog-ng in order to make it trivial to
@define scl-root "`syslog-ng-data`/include/scl"
@define include-path "`include-path`:`syslog-ng-data`/include"
-@include 'modules.conf'
@include 'scl/system/plugin.conf'
@include 'scl/pacct/plugin.conf'
@include 'scl/syslogconf/plugin.conf'
-@version: 3.2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3.2,v 1.1 2011/01/18 17:44:14 mr_bones_ Exp $
+@version: 3.4
+# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/3.4/syslog-ng.conf.gentoo,v 1.2 2013/06/02 01:18:35 mr_bones_ Exp $
#
# Syslog-ng default configuration file for Gentoo Linux
options {
+ threaded(yes);
chain_hostnames(no);
flush_lines(0);
};
source src {
- unix-stream("/dev/log" max-connections(256));
- internal();
- file("/proc/kmsg");
+ unix-stream("/dev/log" max-connections(256));
+# system();
+ internal();
+ file("/proc/kmsg");
};
destination d_messages { file("/var/log/syslog.d/$FACILITY"); };
-@version: 3.2
-# $Header: /etc/syslog-ng/.rcs/syslog-ng.conf.org,v 1.2 2011/01/18 17:44:14 root Exp $
+@version: 3.4
+# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/3.4/syslog-ng.conf.gentoo,v 1.2 2013/06/02 01:18:35 mr_bones_ Exp $
#
# Syslog-ng default configuration file for Gentoo Linux
+# https://bugs.gentoo.org/show_bug.cgi?id=426814
+@include "scl.conf"
+
options {
+ threaded(yes);
chain_hostnames(no);
# The default action of syslog-ng is to log a STATS line
mark_freq(3600);
};
-source src {
- unix-stream("/dev/log" max-connections(256));
- internal();
- file("/proc/kmsg");
-};
+source src { system(); internal(); };
destination messages { file("/var/log/messages"); };
# the compiled in servers are not suitable. Each entry is a single
# text line and consists of a regular expression pattern to match and
# the whois server to be used for it, separated by blank space.
+# IDN domains must use the ACE format.
#
# Eg:
# \.nz$ nz.whois-servers.net
projects / config / helga / etc.git / commitdiff