+++ /dev/null
-head 1.4;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.4
-date 2010.12.01.23.32.18; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2010.12.01.15.48.50; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.05.27.13.09.20; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.26.13.08.21; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@use strict;
-
-# Sample configuration file for amavisd-new (traditional style, chatty,
-# you may prefer to start with the more concise supplied amavisd.conf)
-#
-# See amavisd.conf-default for a list of all variables with their defaults;
-# for more details see documentation in INSTALL, README_FILES/*
-# and at http://www.ijs.si/software/amavisd/amavisd-new-docs.html
-
-# This software is licensed under the GNU General Public License (GPL).
-# See comments at the start of amavisd-new for the whole license text.
-
-#Sections:
-# Section I - Essential daemon and MTA settings
-# Section II - MTA specific
-# Section III - Logging
-# Section IV - Notifications/DSN, bounce/reject/discard/pass, quarantine
-# Section V - Per-recipient and per-sender handling, whitelisting, etc.
-# Section VI - Resource limits
-# Section VII - External programs, virus scanners, SpamAssassin
-# Section VIII - Debugging
-# Section IX - Policy banks (dynamic policy switching)
-
-#GENERAL NOTES:
-# This file is a normal Perl code, interpreted by Perl itself.
-# - make sure this file (or directory where it resides) is NOT WRITABLE
-# by mere mortals (not even vscan/amavis; best to make it owned by root),
-# otherwise it can represent a severe security risk!
-# - for values which are interpreted as booleans, it is recommended
-# to use 1 for true, and 0 or undef or '' for false;
-# Note that this interpretation of boolean values does not apply directly
-# to LDAP and SQL lookups, which follow their own rules - see README.lookups
-# and README.ldap (in short: use Y/N in SQL, and TRUE/FALSE in LDAP);
-# - Perl syntax applies. Most notably: strings in "" may include variables
-# (which start with $ or @@); to include characters $ and @@ and \ in double
-# quoted strings precede them by a backslash; in single-quoted strings
-# the $ and @@ lose their special meaning, so it is usually easier to use
-# single quoted strings (or qw operator) for e-mail addresses.
-# In both types of quoting a backslash should to be doubled.
-# - variables with names starting with a '@@' are lists, the values assigned
-# to them should be lists too, e.g. ('one@@foo', $mydomain, "three");
-# note the comma-separation and parenthesis. If strings in the list
-# do not contain spaces nor variables, a Perl operator qw() may be used
-# as a shorthand to split its argument on whitespace and produce a list
-# of strings, e.g. qw( one@@foo example.com three ); Note that the argument
-# to qw is quoted implicitly and no variable interpretation is done within
-# (no '$' variable evaluations). The #-initiated comments can NOT be used
-# within a string. In other words, $ and # lose their special meaning
-# within a qw argument, just like within '...' strings.
-# - all e-mail addresses in this file and as used internally by the daemon
-# are in their raw (rfc2821-unquoted and non-bracketed) form, i.e.
-# Bob "Funny" Dude@@example.com, not: "Bob \"Funny\" Dude"@@example.com
-# and not <"Bob \"Funny\" Dude"@@example.com>; also: '' and not '<>'.
-# - the term 'default value' in examples below refers to the value of a
-# variable pre-assigned to it by the program; any explicit assignment
-# to a variable in this configuration file overrides the default value;
-
-
-#
-# Section I - Essential daemon and MTA settings
-#
-
-# $MYHOME serves as a quick default for some other configuration settings.
-# More refined control is available with each individual setting further down.
-# $MYHOME is not used directly by the program. No trailing slash!
-$MYHOME = '/var/amavis'; # (default is '/var/amavis'), -H
-
-# $mydomain serves as a quick default for some other configuration settings.
-# More refined control is available with each individual setting further down.
-# $mydomain is never used directly by the program.
-$mydomain = 'brehm-online.com'; # (no useful default)
-
-# $myhostname = 'host.example.com'; # fqdn of this host, default by uname(3)
-$myhostname = 'helga.brehm-online.com';
-
-# Set the user and group to which the daemon will change if started as root
-# (otherwise just keeps the UID unchanged, and these settings have no effect):
-$daemon_user = 'amavis'; # (no default; customary: vscan or amavis), -u
-$daemon_group = 'amavis'; # (no default; customary: vscan or amavis), -g
-
-# Runtime working directory (cwd), and a place where
-# temporary directories for unpacking mail are created.
-# (no trailing slash, may be a scratch file system)
-#$TEMPBASE = $MYHOME; # (must be set if other config vars use is), -T
-$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
-
-#$db_home = "$MYHOME/db"; # DB databases directory, default "$MYHOME/db", -D
-
-# $helpers_home sets environment variable HOME, and is passed as option
-# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
-# on a normal persistent file system, not a scratch or temporary file system
-#$helpers_home = $MYHOME; # (defaults to $MYHOME), -S
-
-# Run the daemon in the specified chroot jail if nonempty:
-#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot), -R
-
-#$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid"), -P
-#$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock"), -L
-
-# set environment variables if you want (no defaults):
-$ENV{TMPDIR} = $TEMPBASE; # used for SA temporary files, by some decoders, etc.
-
-$enable_db = 1; # enable use of BerkeleyDB/libdb (SNMP and nanny)
-$enable_global_cache = 1; # enable use of libdb-based cache if $enable_db=1
-
-$enable_dkim_verification = 0; # enable DKIM signatures verification
-$enable_dkim_signing = 0; # load DKIM signing code, keys defined by dkim_key
-
-# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
-# both $forward_method and $notify_method default to 'smtp:[127.0.0.1]:10025'
-
-# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
-# (set host and port number as required; host can be specified
-# as an IP address or a DNS name (A or CNAME, but MX is ignored)
-#$forward_method = 'smtp:[127.0.0.1]:10025'; # where to forward checked mail
-#$notify_method = $forward_method; # where to submit notifications
-
-#$os_fingerprint_method = 'p0f:127.0.0.1:2345'; # query p0f-analyzer.pl
-
-# To make it possible for several hosts to share one content checking daemon,
-# the IP address and/or the port number in $forward_method and $notify_method
-# may be spacified as an asterisk. An asterisk in the colon-separated
-# second field (host) will be replaced by the SMTP client peer address,
-# An asterisk in the third field (tcp port) will be replaced by the incoming
-# SMTP/LMTP session port number plus one. This obsoletes the previously used
-# less flexible configuration parameter $relayhost_is_client. An example:
-# $forward_method = 'smtp:*:*'; $notify_method = 'smtp:*:10587';
-
-
-# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
-# uncomment the appropriate settings below if using other setups!
-
-# SENDMAIL MILTER, using amavis-milter.c helper program:
-#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
-# milter; option -odd is needed to avoid deadlocks
-#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
-# just a thought: can we use use -Am instead of -odd ?
-
-# SENDMAIL (old non-milter setup, as relay, deprecated):
-#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
-#$notify_method = $forward_method;
-
-# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent, deprecated):
-#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
-#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
-
-# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
-#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
-#$notify_method = $forward_method;
-
-# COURIER using courierfilter
-#$forward_method = undef; # no explicit forwarding, Courier does it itself
-#$notify_method = 'pipe:flags=q argv=perl -e $pid=fork();if($pid==-1){exit(75)}elsif($pid==0){exec(@@ARGV)}else{exit(0)} /usr/sbin/sendmail -f ${sender} -- ${recipient}';
-# Only set $courierfilter_shutdown to 1 if you are using courierfilter to
-# control the startup and shutdown of amavis
-#$courierfilter_shutdown = 1; # (default 0)
-
-# prefer to collect mail for forwarding as BSMTP files?
-#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
-#$notify_method = $forward_method;
-
-@@auth_mech_avail = qw(PLAIN LOGIN);
-$auth_required_inp = 0;
-$auth_required_out = 0;
-
-# Net::Server pre-forking settings
-# The $max_servers should match the width of your MTA pipe
-# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
-# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
-#
-$max_servers = 2; # num of pre-forked children (2..30 is common), -m
-$max_requests = 20; # retire a child after that many accepts (default 20)
-
-$child_timeout=5*60; # abort child if it does not complete its processing in
- # approximately n seconds (default: 8*60 seconds)
-
-$smtpd_timeout = 120; # disconnect session if client is idle for too long
- # (default: 8*60 seconds); should be higher than a
- # Postfix setting max_idle (default 100s)
-
-# Here is a QUICK WAY to completely DISABLE some sections of code
-# that WE DO NOT WANT (it won't even be compiled-in).
-# For more refined controls leave the following two lines commented out,
-# and see further down what these two lookup lists really mean.
-#
-# @@bypass_virus_checks_maps = (1); # controls running of anti-virus code
-# @@bypass_spam_checks_maps = (1); # controls running of anti-spam code
-# $bypass_decode_parts = 1; # controls running of decoders&dearchivers
-#
-# Any setting can be changed with a new assignment, so make sure
-# you do not unintentionally override these settings further down!
-
-# Check also the settings of @@av_scanners at the end if you want to use
-# virus scanners. If not, you may want to delete the whole long assignment
-# to the variable @@av_scanners and @@av_scanners_backup, which will also
-# remove the virus checking code (e.g. if you only want to do spam scanning).
-
-
-# Lookup list of local domains (see README.lookups for syntax details)
-#
-# @@local_domains_maps is a list of lookup tables which are used in deciding
-# whether a recipient is local or not, or in other words, if the message is
-# outgoing or not. This affects inserting spam-related and OS fingerprinting
-# header fields for local recipients, editing Subject header field and allowing
-# mail body defanging, limiting recipient notifications to local recipients,
-# in deciding if address extension may be appended, in matching mail addresses
-# to non-fqdn SQL record keys, for proper operation of pen pals feature,
-# for selecting statistics counters (distinguishing outgoing from internal-
-# to internal mail), and possibly more in future versions.
-# Set it up correctly if you need features that rely on this setting.
-#
-# With Postfix (2.0) a quick hint on what local domains normally are:
-# a union of domains specified in: mydestination, virtual_alias_domains,
-# virtual_mailbox_domains, and relay_domains.
-
-@@local_domains_maps = ( [".$mydomain"] ); # $mydomain and its subdomains
-# @@local_domains_maps = (); # default is empty list, no recip. considered local
-# @@local_domains_maps = # using ACL lookup table
-# ( [ ".$mydomain", 'sub.example.net', '.example.com' ] );
-# @@local_domains_maps = # similar, split list elements on whitespace
-# ( [qw( .example.com !host.sub.example.net .sub.example.net )] );
-# @@local_domains_maps = ( new_RE( qr'[@@.]example\.com$'i ) ); # using regexp
-# @@local_domains_maps = ( read_hash("$MYHOME/local_domains") ); # using hash
-# perhaps combined with Postfix: mydestination = /var/amavis/local_domains
-# for debugging purposes: dump_hash($local_domains_maps[0]);
-#
-# Section II - MTA specific (defaults should be ok)
-#
-
-#$insert_received_line = 1; # behave like MTA: insert 'Received:' header
- # (does not apply to sendmail/milter)
- # (default is true)
-
-# AMAVIS-CLIENT AND COURIER PROTOCOL INPUT SETTINGS (e.g. amavisd-release, or
-# sendmail milter through helper clients like amavis-milter.c and amavis.c)
-# option(s) -p overrides $inet_socket_port and $unix_socketname
-$unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
-#$unix_socketname = undef; # disable listening on a unix socket
- # (default is undef, i.e. disabled)
-#$unix_socketname = "/var/lib/courier/allfilters/amavisd"; # Courier socket
- # (usual setting is $MYHOME/amavisd.sock)
-
-# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
-# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
-$inet_socket_port = 10024; # accept SMTP on this local TCP port
- # (default is undef, i.e. disabled)
-# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
-
-# SMTP SERVER (INPUT) access control
-# - do not allow free access to the amavisd SMTP port !!!
-#
-# when MTA is at the same host, use the following (one or the other or both):
-#$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
- # (default is '127.0.0.1')
-@@inet_acl = qw(127.0.0.1 [::1]); # allow SMTP access only from localhost IP
- # (default is qw(127.0.0.1 [::1]) )
-
-# when MTA (one or more) is on a different host, use the following:
-#@@inet_acl = qw(127.0.0.0/8 [::1] 10.1.0.1 10.1.0.2); # adjust list as needed
-#$inet_socket_bind = undef; # bind to all IP interfaces if undef
-
-#
-# Example1:
-# @@inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
-# permit only SMTP access from loopback and rfc1918 private address space
-#
-# Example2:
-# @@inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
-# 127.0.0.1 10/8 172.16/12 192.168/16 );
-# matches loopback and rfc1918 private address space except host 192.168.1.12
-# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
-#
-# Example3:
-# @@inet_acl = qw( 127/8
-# !172.16.3.0 !172.16.3.127 172.16.3.0/25
-# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
-# matches loopback and both halves of the 172.16.3/24 C-class,
-# split into two subnets, except all four broadcast addresses
-# for these subnets
-
-
-# @@mynetworks is an IP access list which determines if the original SMTP client
-# IP address belongs to our internal networks, i.e. mail is coming from inside.
-# It is much like the Postfix parameter 'mynetworks' in semantics and similar
-# in syntax, and its value should normally match the Postfix counterpart.
-# It only affects the value of a macro %l (=sender-is-local),
-# and the loading of policy 'MYNETS' if present (see below).
-# Note that '-o smtp_send_xforward_command=yes' (or its lmtp counterpart)
-# must be enabled in the Postfix service that feeds amavisd, otherwise
-# client IP address is not available to amavisd-new.
-#
-# @@mynetworks = qw( 127.0.0.0/8 [::1] [FE80::]/10 [FEC0::]/10
-# 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 ); # default
-#
-# A list of networks can also be read from a file, either as an IP acl in
-# CIDR notation, one address per line (comments and empty lines are allowed):
-# @@mynetworks_maps = (read_array('/etc/amavisd-mynetworks'), \@@mynetworks);
-#
-# or less flexibly (but provides faster lookups for large lists) by reading
-# into a hash lookup table, which only allows for full addresses or classful
-# IPv4 subnets with truncated octets, such as 127, 10, 192.168, 10.11.12.13,
-# one address per line (comments and empty lines are allowed):
-# @@mynetworks_maps = (read_hash('/etc/amavisd-mynetworks'), \@@mynetworks);
-
-# See README.lookups for details on specifying access control lists.
-
-
-#
-# Section III - Logging
-#
-
-# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
-$DO_SYSLOG = 1; # (defaults to 0)
-
-$syslog_ident = 'amavis'; # Syslog ident string (defaults to 'amavis')
-$syslog_facility = 'mail'; # Syslog facility as a string
- # e.g.: mail, daemon, user, local0, ... local7, ...
-$syslog_priority = 'info'; # Syslog base (minimal) priority as a string,
- # choose from: emerg, alert, crit, err, warning, notice, info, debug
-
-# Log file (if not using syslog)
-$LOGFILE = "$MYHOME/amavis.log"; # (defaults to empty, no log)
-
-#NOTE: levels are not strictly observed and are somewhat arbitrary
-# 0: startup/exit/failure messages, viruses detected
-# 1: args passed from client, some more interesting messages
-# 2: virus scanner output, timing
-# 3: server, client
-# 4: decompose parts
-# 5: more debug details
-$log_level = 3; # (defaults to 0), -d
-
-# Customizable template for the most interesting log file entry (e.g. with
-# $log_level=0) (take care to properly quote Perl special characters like '\')
-# For a list of available macros see README.customize .
-
-# $log_templ = undef; # undef disables by-message level-0 log entries
-$log_recip_templ = undef; # undef disables by-recipient level-0 log entries
-
-
-# log both infected and noninfected messages (as deflt, with size,subj,tests):
-# (remove the leading '#' and a space in the following lines to activate)
-
-# $log_templ = <<'EOD';
-# [?%#D|#|Passed #
-# [? [:ccat|major] |OTHER|CLEAN|MTA-BLOCKED|OVERSIZED|BAD-HEADER|SPAMMY|SPAM|\
-# UNCHECKED|BANNED (%F)|INFECTED (%V)]#
-# , [? %p ||%p ][?%a||[?%l||LOCAL ]\[%a\] ][?%e||\[%e\] ]%s -> [%D|,]#
-# [? %q ||, quarantine: %q]#
-# [? %Q ||, Queue-ID: %Q]#
-# [? %m ||, Message-ID: %m]#
-# [? %r ||, Resent-Message-ID: %r]#
-# , mail_id: %i#
-# , Hits: [:SCORE]#
-# , size: %z#
-# [~[:remote_mta_smtp_response]|["^$"]||[", queued_as: "]]\
-# [remote_mta_smtp_response|[~%x|["queued as ([0-9A-Z]+)$"]|["%1"]|["%0"]]|/]#
-# [? [:header_field|Subject] ||, Subject: [:dquote|[:header_field|Subject]]]#
-# [? [:header_field|From] ||, From: [:uquote|[:header_field|From]]]#
-# [? [:useragent|name] ||, [:useragent|name]: [:uquote|[:useragent|body]]]#
-# [? %#T ||, Tests: \[[%T|,]\]]#
-# [:supplementary_info|SCTYPE|, shortcircuit=%%s]#
-# [:supplementary_info|AUTOLEARN|, autolearn=%%s]#
-# , %y ms#
-# ]
-# [?%#O|#|Blocked #
-# [? [:ccat|major|blocking] |#
-# OTHER|CLEAN|MTA-BLOCKED|OVERSIZED|BAD-HEADER|SPAMMY|SPAM|\
-# UNCHECKED|BANNED (%F)|INFECTED (%V)]#
-# , [? %p ||%p ][?%a||[?%l||LOCAL ]\[%a\] ][?%e||\[%e\] ]%s -> [%O|,]#
-# [? %q ||, quarantine: %q]#
-# [? %Q ||, Queue-ID: %Q]#
-# [? %m ||, Message-ID: %m]#
-# [? %r ||, Resent-Message-ID: %r]#
-# , mail_id: %i#
-# , Hits: [:SCORE]#
-# , size: %z#
-# #, smtp_resp: [:smtp_response]#
-# [? [:header_field|Subject] ||, Subject: [:dquote|[:header_field|Subject]]]#
-# [? [:header_field|From] ||, From: [:uquote|[:header_field|From]]]#
-# [? [:useragent|name] ||, [:useragent|name]: [:uquote|[:useragent|body]]]#
-# [? %#T ||, Tests: \[[%T|,]\]]#
-# [:supplementary_info|SCTYPE|, shortcircuit=%%s]#
-# [:supplementary_info|AUTOLEARN|, autolearn=%%s]#
-# , %y ms#
-# ]
-# EOD
-
-#
-# Section IV - Notifications/DSN, bounce/reject/discard/pass, quarantine
-#
-
-# Select notifications text encoding when Unicode-aware Perl is converting
-# text from internal character representation to external encoding (charset
-# in MIME terminology). Used as argument to Perl Encode::encode subroutine.
-#
-# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
-#$hdr_encoding = 'iso-8859-1'; # MIME charset (default: 'iso-8859-1')
-#$hdr_encoding_qb = 'Q'; # MIME encoding: quoted-printable (default)
-#$hdr_encoding_qb = 'B'; # MIME encoding: base64
-#
-# to be used in notification body text: its encoding and Content-type.charset
-#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
-
-# Default template texts for notifications may be overruled by directly
-# assigning new text to template variables, or by reading template text
-# from files. A second argument may be specified in a call to read_text(),
-# specifying character encoding layer to be used when reading from the
-# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
-# Text will be converted to internal character representation by Perl 5.8.0
-# or later; second argument is ignored otherwise. See PerlIO::encoding,
-# Encode::PerlIO and perluniintro man pages.
-#
-# $notify_sender_templ = read_text("$MYHOME/notify_sender.txt");
-# $notify_virus_sender_templ= read_text("$MYHOME/notify_virus_sender.txt");
-# $notify_virus_admin_templ = read_text("$MYHOME/notify_virus_admin.txt");
-# $notify_virus_recips_templ= read_text("$MYHOME/notify_virus_recips.txt");
-# $notify_spam_sender_templ = read_text("$MYHOME/notify_spam_sender.txt");
-# $notify_spam_admin_templ = read_text("$MYHOME/notify_spam_admin.txt");
-
-# If notification template files are collectively available in some directory,
-# one may call read_l10n_templates which invokes read_text for each known
-# template. This is primarily a Debian-specific feature, but was incorporated
-# into base code to facilitate porting.
-#
-# read_l10n_templates('/etc/amavis/en_US');
-#
-# If read_l10n_templates is called, a localization template directory must
-# contain the following files:
-# charset this file should contain a one-line name
-# of the character set used in the template
-# files (e.g. utf8, iso-8859-2, ...) and is
-# passed as the second argument to read_text;
-# template-dsn.txt content fills the $notify_sender_templ
-# template-virus-sender.txt content fills the $notify_virus_sender_templ
-# template-virus-admin.txt content fills the $notify_virus_admin_templ
-# template-virus-recipient.txt content fills the $notify_virus_recips_templ
-# template-spam-sender.txt content fills the $notify_spam_sender_templ
-# template-spam-admin.txt content fills the $notify_spam_admin_templ
-
-# Here is an overall picture (sequence of events) of how pieces fit together
-#
-# bypass_virus_checks set for all recipients? ==> PASS
-# no viruses? ==> PASS
-# log virus if $log_templ is nonempty
-# quarantine if $virus_quarantine_to is nonempty
-# notify admin if $virus_admin (lookup) nonempty
-# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
-# add address extensions for local recipients (when enabled)
-# send (non-)delivery notifications
-# to sender if DSN needed (BOUNCE or ($warnvirussender and D_PASS))
-# virus_lovers or final_destiny==D_PASS ==> PASS
-# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
-#
-# Equivalent flow diagram applies for spam checks.
-# If a virus is detected, spam checking is skipped entirely.
-
-# The following symbolic constants can be used in *_destiny settings:
-#
-# D_PASS mail will pass to recipients, regardless of bad contents;
-#
-# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
-# notified. Effectively we lose mail (but will be quarantined
-# unless disabled). Losing mail is not decent for a mailer,
-# but might be desired.
-#
-# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
-# notification (bounce) will be sent to the sender by amavisd-new;
-# Exception: bounce (DSN) will not be sent if a virus name matches
-# @@viruses_that_fake_sender_maps, or to messages from mailing lists
-# (Precedence: bulk|list|junk), or for spam level that exceeds
-# the $sa_dsn_cutoff_level.
-#
-# D_REJECT mail will not be delivered to its recipients, sender should
-# preferably get a reject, e.g. SMTP permanent reject response
-# (e.g. with milter), or non-delivery notification from MTA
-# (e.g. Postfix). If this is not possible (e.g. different recipients
-# have different tolerances to bad mail contents and not using LMTP)
-# amavisd-new sends a bounce by itself (same as D_BOUNCE).
-# Not to be used with Postfix or dual-MTA setups!
-#
-# Notes:
-# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
-# for informing the sender about non-delivery, and how informative
-# the notification can be (amavisd-new knows more than MTA);
-# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
-# notification, colloquially called 'bounce') - depending on MTA;
-# Best suited for sendmail milter and Courier, especially for spam.
-# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
-# reason for mail non-delivery or even suppress DSN, but unable
-# to reject the original SMTP session). Best suited to reporting
-# viruses, and for Postfix and other dual-MTA setups, which can't
-# reject original client SMTP session, as the mail has already
-# been enqueued.
-
-# Alternatives to consider for spam:
-# - use D_PASS if clients will do filtering based on inserted
-# mail headers or added address extensions ('plus-addressing');
-# - use D_DISCARD, if kill_level is set comfortably high;
-#
-# D_BOUNCE is preferred for viruses, but consider:
-# - use D_PASS (or virus_lovers) to deliver viruses;
-# - use D_REJECT instead of D_BOUNCE if using Courier or milter and under heavy
-# virus storm;
-
-
-# The use of new *_by_ccat hashes is illustrated by the following examples
-# on configuring final_*_destiny.
-
-
-# using traditional settings of $final_*_destiny variables, relying on a
-# default setting of an associative array %final_destiny_by_ccat which is
-# backwards compatible and contains references to these traditional variables:
-#
-$final_virus_destiny = D_REJECT; # (defaults to D_DISCARD)
-$final_banned_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_spam_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_bad_header_destiny = D_PASS; # (defaults to D_PASS)
-
-########
-#
-# Please think about what you are doing when you set these options.
-# If necessary, question your origanization's e-mail policies:
-#
-# D_BOUNCE contributes to the overall spread of virii and spam on the
-# internet. Both the envelope and header from addresses can be forged
-# accurately with no effort, causing the bounces to go to innocent parties,
-# whose addresses have been forged.
-#
-# D_DISCARD breaks internet mail specifications. However, with a
-# properly implemented Quaratine system, the concern for breaking the
-# specification is addressed to some extent.
-#
-# D_PASS is the safest way to handle e-mails. You must implement
-# client-side filtering to handle this method.
-#
-# -Cory Visi <merlin@@gentoo.org> 07/28/04
-#
-#######
-
-# to explicitly list all (or most) possible contents category (ccat) keys:
-%final_destiny_by_ccat = (
- CC_VIRUS, D_DISCARD,
- CC_BANNED, D_BOUNCE,
- CC_UNCHECKED, D_PASS,
- CC_SPAM, D_DISCARD,
- CC_BADH, D_PASS,
- CC_OVERSIZED, D_BOUNCE,
- CC_CLEAN, D_PASS,
- CC_CATCHALL, D_PASS,
-);
-
-# to rely on a catchall ccat key and only list exceptions (alternative 1):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_BANNED, D_BOUNCE,
-# CC_SPAM, D_BOUNCE,
-# CC_BADH.',4', D_BOUNCE, # BadHdrSpace
-# CC_BADH.',3', D_BOUNCE, # BadHdrChar
-# CC_OVERSIZED, D_BOUNCE,
-# CC_CATCHALL, D_PASS,
-#);
-
-# to rely on a catchall ccat key and list exceptions (alternative 2):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_UNCHECKED, D_PASS,
-# CC_BADH.',6', D_PASS, # BadHdrSyntax
-# CC_BADH.',5', D_PASS, # BadHdrLong
-# CC_BADH.',2', D_PASS, # BadHdr8bit
-# CC_BADH.',1', D_PASS, # BadHdrMime
-# CC_CLEAN, D_PASS,
-# CC_CATCHALL, D_BOUNCE,
-#);
-
-# to rely on a catchall ccat key and list exceptions (alternative 3):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_UNCHECKED, D_PASS,
-# CC_BADH.',4', D_BOUNCE, # BadHdrSpace
-# CC_BADH.',3', D_BOUNCE, # BadHdrChar
-# CC_BADH, D_PASS, # sub-catchall for CC_BADH
-# CC_CLEAN, D_PASS,
-# CC_CATCHALL, D_BOUNCE,
-#);
-
-# to rely on a default %final_destiny_by_ccat and only change few settings:
-#$final_destiny_by_ccat{+CC_SPAM} = D_PASS;
-#$final_destiny_by_ccat{+CC_BADH} = D_BOUNCE;
-#$final_destiny_by_ccat{+CC_BADH.',2'} = D_PASS; # BadHdr8bit
-
-
-
-# For monitoring / testing purposes let the administrator receive a copy
-# of certain delivery status notifications that are mailed back to senders:
-#
-#%dsn_bcc_by_ccat = (
-# CC_BANNED, undef,
-# CC_SPAM, undef,
-# CC_BADH, undef,
-# CC_CATCHALL, 'admin+test@@example.com',
-#);
-#
-# or use a simpler form, taking advantage of defaults in %dsn_bcc_by_ccat:
-#$dsn_bcc = 'admin+test@@example.com';
-
-
-# The following $warn*sender settings are ONLY used when mail is
-# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
-# Bounces or rejects produce non-delivery status notification regardless.
-#
-# Notify sender of syntactically invalid header containing non-ASCII chars?
-#$warnbadhsender = 1; # (defaults to false (undef))
-
-# Notify virus (or banned files or bad headers) RECIPIENT?
-# (not very useful, but some policies demand it)
-#$warnvirusrecip = 1; # (defaults to false (undef))
-#$warnbannedrecip = 1; # (defaults to false (undef))
-#$warnbadhrecip = 1; # (defaults to false (undef))
-
-# Notify also non-local virus/banned recipients if $warn*recip is true?
-# (including those not matching local_domains*)
-#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
-
-
-# Treat envelope sender address as unreliable and don't send sender
-# notification / bounces if name(s) of detected virus(es) match the list.
-# Note that virus names are supplied by external virus scanner(s) and are
-# not standardized, so virus names may need to be adjusted.
-# See README.lookups for syntax, check also README.policy-on-notifications.
-# If the intention is to treat all viruses as faking the sender address, it
-# is equivalent but more efficient to just set $final_virus_destiny=D_DISCARD;
-#
-@@viruses_that_fake_sender_maps = (new_RE(
- qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i,
- qr'tanatos|lentin|bridex|mimail|trojan\.dropper|dumaru|parite|spaces'i,
- qr'dloader|galil|gibe|swen|netwatch|bics|sbrowse|sober|rox|val(hal)?la'i,
- qr'frethem|sircam|be?agle|tanx|mydoom|novarg|shimg|netsky|somefool|moodown'i,
- qr'@@mm|@@MM', # mass mailing viruses as labeled by f-prot and uvscan
- qr'Worm'i, # worms as labeled by ClamAV, Kaspersky, etc
-# [qr'^(EICAR|Joke\.|Junk\.)'i => 0],
-# [qr'^(WM97|OF97|W95/CIH-|JS/Fort)'i => 0],
- [qr/^/ => 1], # true by default (remove or comment-out if undesired)
-));
-
-# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
-# - the administrator envelope address may be a simple fixed e-mail address
-# (a scalar), or may depend on the RECIPIENT address (e.g. its domain).
-#
-# Empty or undef lookup disables virus admin notifications.
-
-# The full set of configurable administrator addresses is:
-# @@virus_admin_maps ... notifications to admin about viruses
-# @@newvirus_admin_maps ... newly encountered viruses since amavisd startup
-# @@spam_admin_maps ... notifications to admin about spam
-# @@banned_admin_maps ... notifications to admin about banned contents
-# @@bad_header_admin_maps ... notifications to admin about bad headers
-
-$virus_admin = "virusalert\@@$mydomain";
-# $virus_admin = 'virus-admin@@example.com';
-# $virus_admin = undef; # do not send virus admin notifications (default)
-#
-#@@virus_admin_maps = ( # by-recipient maps
-# {'not.example.com' => '',
-# '.' => 'virusalert@@example.com'},
-# $virus_admin, # the usual default
-#);
-
-# equivalent to $virus_admin, but for spam admin notifications:
-# $spam_admin = "spamalert\@@$mydomain";
-# $spam_admin = undef; # do not send spam admin notifications (default)
-#@@spam_admin_maps = ( # by-recipient maps
-# {'not.example.com' => '',
-# '.' => 'spamalert@@example.com'},
-# $spam_admin, # the usual default
-#);
-
-# receive a copy of all delivery status notifications sent;
-# useful for testing or monitoring
-#$dsn_bcc = "mailadmin\@@$mydomain";
-
-#advanced example, using a hash lookup table and a scalar default,
-#lookup key is a recipient envelope address:
-#@@virus_admin_maps = ( # by-recipient maps
-# { 'baduser@@sub1.example.com' => 'HisBoss@@sub1.example.com',
-# '.sub1.example.com' => 'virusalert@@sub1.example.com',
-# '.sub2.example.com' => '', # don't send admin notifications
-# 'a.sub3.example.com' => 'abuse@@sub3.example.com',
-# '.sub3.example.com' => 'virusalert@@sub3.example.com',
-# '.example.com' => 'noc@@example.com', # default for our virus senders
-# },
-# 'virusalert@@hq.example.com', # catchall for the rest
-#);
-
-# sender envelope address, from which notification reports are sent from;
-# may be a null reverse path, or a fully qualified address:
-# (admin and recip sender addresses default to a null return path).
-# If using strings in double quotes, don't forget to quote @@, i.e. \@@
-#
-$mailfrom_notify_admin = "virusalert\@@$mydomain";
-$mailfrom_notify_recip = "virusalert\@@$mydomain";
-$mailfrom_notify_spamadmin = "spam.police\@@$mydomain";
-
-# 'From' HEADER FIELD for sender and admin notifications.
-# This should be a replyable address, see rfc1894. Not to be confused
-# with $mailfrom_notify_sender, which is the envelope return address
-# and can be empty (null reverse path) according to rfc2821.
-#
-# The syntax of the 'From' header field is specified in rfc2822, section
-# '3.4. Address Specification'. Note in particular that display-name must be
-# a quoted-string if it contains any special characters like spaces and dots.
-#
-# $hdrfrom_notify_sender = "amavisd-new <postmaster\@@$mydomain>";
-# $hdrfrom_notify_sender = 'amavisd-new <postmaster@@example.com>';
-# $hdrfrom_notify_sender = '"Content-Filter Master" <postmaster@@example.com>';
-# $hdrfrom_notify_admin = $mailfrom_notify_admin;
-# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
-# (default: "\"Content-filter at $myhostname\" <postmaster\@@$myhostname>")
-
-# whom quarantined messages appear to be sent from (envelope sender);
-# keeps original sender if undef, or set it explicitly, default is undef
-$mailfrom_to_quarantine = ''; # override sender address with null return path
-
-
-# Location to put infected mail into: (applies to 'local:' quarantine method)
-# empty for not quarantining, may be a file (Unix-style mailbox),
-# or a directory (no trailing slash)
-# (the default value is undef, meaning no quarantine)
-#
-$QUARANTINEDIR = "$MYHOME/quarantine";
-
-#$quarantine_subdir_levels = 1; # add level of subdirs to disperse quarantine
-
-#$clean_quarantine_method = 'local:clean-%m'; # disabled by default
-#$virus_quarantine_method = 'local:virus-%m'; # default
-#$spam_quarantine_method = 'local:spam-%m.gz'; # default
-#$banned_files_quarantine_method = 'local:banned-%m'; # default
-#$bad_header_quarantine_method = 'local:badh-%m'; # default
-
-# Separate quarantine subdirectories virus, spam, banned and badh within
-# the directory $QUARANTINEDIR may be specified by the following settings
-# (the subdirectories need to exist - must be created manually):
-#$clean_quarantine_method = 'local:clean/%m';
-#$virus_quarantine_method = 'local:virus/%m';
-#$spam_quarantine_method = 'local:spam/%m.gz';
-#$banned_files_quarantine_method = 'local:banned/%m';
-#$bad_header_quarantine_method = 'local:badh/%m';
-#
-#use the 'bsmtp:' method as an alternative to the default 'local:'
-#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%m.bsmtp";
-#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%m.bsmtp";
-#
-#using the 'pipe:' method might be useful for some special purpose:
-#$mailfrom_to_quarantine = undef; # pass on the original sender address
-#$spam_quarantine_method = 'pipe:argv=/usr/bin/myscript.sh spam-%b ${sender}';
-#
-#using the 'sql:' method to store quarantined message to a SQL database:
-#$virus_quarantine_method = $spam_quarantine_method =
-# $banned_files_quarantine_method = $bad_header_quarantine_method = 'sql:';
-
-# Send copy of every mail to an archival mail address:
-#$archive_quarantine_method = $notify_method;
-#@@archive_quarantine_to_maps = ( 'collector@@example.com' );
-
-
-# When using the 'local:' quarantine method (default), the following applies:
-#
-# A finer control of quarantining is available through
-# variables $virus_quarantine_method/$spam_quarantine_method/
-# $banned_files_quarantine_method/$bad_header_quarantine_method.
-#
-# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
-# per-recipient lookup result from lookup tables @@virus_quarantine_to_maps)
-# is/are interpreted as follows:
-#
-# VARIANT 1:
-# empty or undef disables quarantine;
-#
-# VARIANT 2:
-# a string NOT containing an '@@';
-# amavisd will behave as a local delivery agent (LDA) and will quarantine
-# viruses to local files according to hash %local_delivery_aliases (pseudo
-# aliases map) - see subroutine mail_to_local_mailbox() for details.
-# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
-# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
-#
-# * if $QUARANTINEDIR is a directory, each quarantined virus will go
-# to a separate file in the $QUARANTINEDIR directory (traditional
-# amavis style, similar to maildir mailbox format);
-#
-# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
-# mailbox. All quarantined messages will be appended to this file.
-# Amavisd child process must obtain an exclusive lock on the file during
-# delivery, so this may be less efficient than using individual files
-# or forwarding to MTA, and it may not work across NFS or other non-local
-# file systems (but may be handy for pickup of quarantined files via IMAP
-# for example);
-#
-# VARIANT 3:
-# any email address (must contain '@@').
-# The e-mail messages to be quarantined will be handed to MTA
-# for delivery to the specified address. If a recipient address local to MTA
-# is desired, you may leave the domain part empty, e.g. 'infected@@', but the
-# '@@' character must nevertheless be included to distinguish it from variant 2.
-#
-# This variant enables more refined delivery control made available by MTA
-# (e.g. its aliases file, other local delivery agents, dealing with
-# privileges and file locking when delivering to user's mailbox, nonlocal
-# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
-# will not be handed back to amavisd for checking, as this will cause a loop
-# (hopefully broken at some stage)! If this can be assured, notifications
-# will benefit too from not being unnecessarily virus-scanned.
-#
-# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
-# setup, but probably not safe with sendmail milter interface without tricks.
-
-# (default values are: virus-quarantine, banned-quarantine, spam-quarantine)
-
-$virus_quarantine_to = 'virus-quarantine'; # traditional local quarantine
-#$virus_quarantine_to = 'infected@@'; # forward to MTA for delivery
-#$virus_quarantine_to = "virus-quarantine\@@$mydomain"; # similar
-#$virus_quarantine_to = 'virus-quarantine@@example.com'; # similar
-#$virus_quarantine_to = undef; # no quarantine
-#
-# lookup key is envelope recipient address:
-#@@virus_quarantine_to_maps = ( # per-recip multiple quarantines
-# new_RE( [qr'^user@@example\.com$'i => 'infected@@'],
-# [qr'^(.*)@@example\.com$'i => 'virus-${1}@@example.com'],
-# [qr'^(.*)(@@[^@@])?$'i => 'virus-${1}${2}'] ),
-# $virus_quarantine_to, # the usual default
-#);
-
-# similar for banned names and bad headers and spam (set to undef to disable)
-$banned_quarantine_to = 'banned-quarantine'; # local quarantine
-$bad_header_quarantine_to = 'bad-header-quarantine'; # local quarantine
-$spam_quarantine_to = 'spam-quarantine'; # local quarantine
-
-# or to a mailbox:
-#$spam_quarantine_to = "spam-quarantine\@@$mydomain";
-#
-#@@spam_quarantine_to_maps = ( # per-recip quarantines
-# new_RE( [qr'^(.*)@@example\.com$'i => 'spam-${1}@@example.com'] ),
-# $spam_quarantine_to, # the usual default
-#);
-
-
-# In addition to per-recip quarantine, a by-sender lookup is possible.
-# It is similar to $spam_quarantine_to, but the lookup key is the
-# envelope sender address:
-#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
-
-
-# Spam level beyond which quarantining is disabled (global value):
-#$sa_quarantine_cutoff_level = 20; # dflt: undef, which disables this feature
-
-#@@spam_quarantine_cutoff_level_maps = ( # per-recip. quarantine cutoff levels
-# { 'user1@@example.com' => 20.5,
-# 'postmaster@@example.com' => 9999,
-# '.example.com' => 25 },
-# \$sa_quarantine_cutoff_level, # catchall default
-#);
-
-
-# Add X-Virus-Scanned header field to mail?
-$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: 'X-Virus-Scanned')
-
-# Set to empty to add no header field # (dflt "$myproduct_name at $mydomain")
-# $X_HEADER_LINE = "$myproduct_name at $mydomain";
-# $X_HEADER_LINE = "by $myproduct_name using ClamAV at $mydomain";
-# $X_HEADER_LINE = "$myproduct_name $myversion_id ($myversion_date) at $mydomain";
-
-# a string to prepend to Subject (for local recipients only) if mail could
-# not be decoded or checked entirely, e.g. due to password-protected archives
-$undecipherable_subject_tag = '***UNCHECKED*** '; # undef disables it
-
-# MIME defanging wraps the entire original mail in a MIME container of type
-# 'Content-type: multipart/mixed', where the first part is a text/plain with
-# a short explanation, and the second part is a complete original mail,
-# enclosed in a 'Content-type: message/rfc822' MIME part.
-# Defanging is only done when enabled (selectively by malware type),
-# and mail is considered malware (virus/spam/...), and the malware is allowed
-# to pass (*_lovers or *_destiny=D_PASS)
-#
-$defang_virus = 1; # default is false: don't modify mail body
-$defang_banned = 1; # default is false: don't modify mail body
-# $defang_bad_header = 1; # default is false: don't modify mail body
-# $defang_undecipherable = 1; # default is false: don't modify mail body
-# $defang_spam = 1; # default is false: don't modify mail body
-
-# NOTE: setting the following variables to true may break mail signatures
-# (DKIM and DomainKeys) when verification is done after content filtering:
-# $remove_existing_x_scanned_headers, $remove_existing_x_scanned_headers,
-# and $allow_fixing_improper_header_folding (and defanging, described
-# elsewhere). This is rarely an issue, as mail signing should be done
-# after content filtering, and mail verification should preferably be done
-# before filtering or by SpamAssassin called from within amavisd, which
-# sees still-unmodified mail.
-#
-$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
- # (defaults to false)
-#$remove_existing_x_scanned_headers= 1; # remove existing X-Virus-Scanned
-#$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
-$remove_existing_spam_headers = 1; # remove existing spam headers if
- # spam scanning is enabled (default)
-#$allow_fixing_improper_header_folding = 1; # (default is true)
-
-# set $bypass_decode_parts to true if you only do spam scanning, or if you
-# have a good virus scanner that can deal with compression and recursively
-# unpacking archives by itself, and save amavisd the trouble.
-# Disabling decoding also causes banned_files checking NOT to see MIME types
-# and content classification types as provided by the file(1) utility.
-# It is a double-edged sword, make sure you know what you are doing!
-#
-#$bypass_decode_parts = 1; # (defaults to false)
-
-# don't trust this file type or corresponding unpacker for this file type,
-# keep both the original and the unpacked file for a virus checker to see
-# (lookup key is what file(1) utility returned):
-#
-@@keep_decoded_original_maps = (new_RE(
-# qr'^MAIL$', # retain full original message for virus checking (can be slow)
- qr'^MAIL-UNDECIPHERABLE$', # retain full mail if it contains undecipherables
- qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
-# qr'^Zip archive data', # don't trust Archive::Zip
-));
-
-
-# Checking for banned MIME types and names. If any mail part matches,
-# the whole mail is rejected. Object $banned_filename_re provides a list
-# of Perl regular expressions to be matched against each part's:
-#
-# * Content-Type value (both declared and effective mime-type),
-# such as the possible security-risk content types
-# 'message/partial' and 'message/external-body', as specified in rfc2046
-# or 'application/x-msdownload' and 'application/x-msdos-program';
-#
-# * declared (recommended) file names as specified by MIME subfields
-# Content-Disposition.filename and Content-Type.name, both in their
-# raw (encoded) form and in rfc2047-decoded form if applicable
-# as well as (recommended) file names specified in archives;
-#
-# * file content type as guessed by 'file(1)' utility, mapped
-# (by @@map_full_type_to_short_type_maps) into short type names such as
-# .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe-ms, ..., which always
-# starts with a dot. These short types are available unless
-# $bypass_decode_parts is true.
-#
-# All nodes (mail parts) of the fully recursively decoded mail and embedded
-# archives are checked, each node independently from remaining nodes.
-#
-# For each node all its ancestor nodes including itself are checked against
-# $banned_filename_re lookup list, top-down. The search for a node stops
-# at the first match, the right-hand side of the matching key determines
-# the result (true or false, absent right-hand side implies true, as explained
-# in README.lookups).
-#
-# Although repeatedly re-checking ancestor nodes may seem excessive, it gives
-# the opportunity to specify rules which make a particular node hide its
-# descendents, e.g. allow any name or file type within a .zip, even though
-# .exe files may otherwise not be allowed.
-#
-# Leave $banned_filename_re undefined to disable these checks
-# (giving an empty list to new_RE() will also always return false)
-
-# for $banned_namepath_re (a new-style of banned table) see amavisd.conf-sample
-
-$banned_filename_re = new_RE(
-
-### BLOCKED ANYWHERE
-# qr'^UNDECIPHERABLE$', # is or contains any undecipherable components
- qr'^\.(exe-ms|dll)$', # banned file(1) types, rudimentary
-# qr'^\.(exe|lha|tnef|cab|dll)$', # banned file(1) types
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
-# [ qr'^\.(gz|bz2)$' => 0 ], # allow any in gzip or bzip2
- [ qr'^\.(rpm|cpio|tar)$' => 0 ], # allow any in Unix-type archives
-
- qr'.\.(pif|scr)$'i, # banned extensions - rudimentary
-# qr'^\.zip$', # block zip type
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN ARCHIVES:
-# [ qr'^\.(zip|rar|arc|arj|zoo)$'=> 0 ], # allow any within these archives
-
- qr'^application/x-msdownload$'i, # block these MIME types
- qr'^application/x-msdos-program$'i,
- qr'^application/hta$'i,
-
-# qr'^message/partial$'i, # rfc2046 MIME type
-# qr'^message/external-body$'i, # rfc2046 MIME type
-
-# qr'^(application/x-msmetafile|image/x-wmf)$'i, # Windows Metafile MIME type
-# qr'^\.wmf$', # Windows Metafile file(1) type
-
- # block certain double extensions in filenames
- qr'\.[^./]*[A-Za-z][^./]*\.\s*(exe|vbs|pif|scr|bat|cmd|com|cpl|dll)[.\s]*$'i,
-
-# qr'\{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?'i, # Class ID CLSID, strict
-# qr'\{[0-9a-z]{4,}(-[0-9a-z]{4,}){0,7}\}?'i, # Class ID extension CLSID, loose
-
- qr'.\.(exe|vbs|pif|scr|cpl)$'i, # banned extension - basic
-# qr'.\.(exe|vbs|pif|scr|cpl|bat|cmd|com)$'i, # banned extension - basic+cmd
-# qr'.\.(ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ins|isp|js|jse|lnk|mda|mdb|mde|mdw|mdt|mdz|msc|msi|msp|mst|
-# ops|pcd|pif|prg|reg|scr|sct|shb|shs|vb|vbe|vbs|
-# wmf|wsc|wsf|wsh)$'ix, # banned ext - long
-# qr'.\.(ani|cur|ico)$'i, # banned cursors and icons filename
-# qr'^\.ani$', # banned animated cursor file(1) type
-
-# qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
-);
-# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
-# and http://www.cknow.com/vtutor/vtextensions.htm
-
-# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
-# as well as any file name which happens to end with .exe. If only matching
-# a file name is desired, but not the short type, a pattern qr'.\.exe$'i
-# or similar may be used, which requires that at least one character precedes
-# the '.exe', and so it will never match short file types which always start
-# with a dot.
-
-
-# the syntax of these Perl regular expressions is a bit awkward if not
-# familiar with them, so please do follow examples and stick to the idioms:
-# \A ... at the beginning of the first component
-# \z ... at the end of the the last (leaf) component
-# ^ ... at the beginning of each component in the path
-# $ ... at the end of each component in the path
-# (.*\t)? ... at the beginning of a field
-# (\t.*)? ... at the end of a field
-# \t(.*\t)* ... separating fields
-# [^\t\n] ... any single character, but don't escape from this field
-# (.*\n)+ ... one or more levels down
-# (?#...) ... a comment within a regexp
-
-# new-style of banned lookup table
-$banned_namepath_re = new_RE(
-
-### BLOCKED ANYWHERE
-
- qr'(?# BLOCK Microsoft EXECUTABLES and DLL )
- ^ (.*\t)? T=(exe-ms|dll) (\t.*)? $'xm, # banned file(1) types, rudimentary
-
-# qr'(?# BLOCK ANY EXECUTABLE )
-# ^ (.*\t)? T=exe (\t.*)? $'xm, # banned file(1) type
-
-# qr'(?# BLOCK THESE TYPES )
-# ^ (.*\t)? T=(exe|lha|tnef|cab|dll) (\t.*)? $'xm, # banned file(1) types
-
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
-
-# # within traditional gzip and bzip2 allow any name and type
-# [ qr'(?#rule-3) ^ (.*\t)? T=(gz|bz2) (\t.*)? $'xmi => 0 ], # allow
-
- # within traditional Unix archives allow any name and type
- [ qr'(?#rule-4) ^ (.*\t)? T=(tar|rpm|cpio) (\t.*)? $'xmi => 0 ], # allow
-
- # banned filename extensions (in declared names) anywhere - rudimentary
- qr'(?# BLOCK COMMON NAME EXENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. (pif|scr) (\t.*)? $'xmi,
-
-# # block anything within a zip
-# qr'(?#rule-5) ^ (.*\t)? T=zip (\t.*)? (.*\n)+ .* $'xmi,
-
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN ARCHIVES OR CRYPTED:
-
-# # within PC archives allow any types or names at any depth
-# [ qr'(?#rule-7) ^ (.*\t)? T=(zip|rar|arc|arj|zoo) (\t.*)? $'xmi => 0 ], # ok
-
-# # within certain archives allow leaf members at any depth if crypted
-# [ qr'(?# ALLOW ENCRYPTED )
-# ^ (.*\t)? T=(zip|rar|arj) (.*\n)+ (.*\t)? A=C (\t.*)? \z'xmi => 0 ],
-
-# # allow crypted leaf members regardless of their name or type
-# [ qr'(?# ALLOW IF ENCRYPTED ) ^ (.*\t)? A=C (\t.*)? \z'xmi => 0 ],
-
- # block these MIME types
- qr'(?#NO X-MSDOWNLOAD) ^(.*\t)? M=application/x-msdownload (\t.*)? $'xmi,
- qr'(?#NO X-MSDOS-PROGRAM)^(.*\t)? M=application/x-msdos-program(\t.*)? $'xmi,
- qr'(?#NO HTA) ^(.*\t)? M=application/hta (\t.*)? $'xmi,
-
-# # block rfc2046 MIME types
-# qr'(?# BLOCK RFC2046 ) ^ (.*\t)? M=message/partial (\t.*)? $'xmi,
-# qr'(?# BLOCK RFC2046 ) ^ (.*\t)? M=message/external-body (\t.*)? $'xmi,
-
-# qr'(?#No Metafile MIME) ^(.*\t)? M=application/x-msmetafile (\t.*)? $'xmi,
-# qr'(?#No Metafile MIME) ^(.*\t)? M=image/x-wmf (\t.*)? $'xmi,
-# qr'(?#No Metafile file) ^(.*\t)? T=wmf (\t.*)? $'xm,
-# qr'(?#No animated cursors) ^(.*\t)? T=ani (\t.*)? $'xm,
-
- # block certain double extensions in filenames
- qr'(?# BLOCK DOUBLE-EXTENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. [^./\t\n]* [A-Za-z] [^./\t\n]* \. \ *
- (exe|vbs|pif|scr|bat|cmd|com|cpl|dll) [. ]* (\t.*)? $'xmi,
-
- [ qr'(?# BLOCK EMPTY MIME PART APPLICATION/OCTET-STREAM )
- ^ (.*\t)? M=application/(octet-stream|x-msdownload|x-msdos-program)
- \t(.*\t)* T=empty (\t.*)? $'xmi
- => 'DISCARD' ],
-
-# [ qr'(?# BLOCK EMPTY MIME PARTS )
-# ^ (.*\t)? M= [^\t\n]+ \t(.*\t)* T=empty (\t.*)? $'xmi => 'DISCARD' ],
-
-# # block Class ID (CLSID) extensions in filenames, strict
-# qr'(?# BLOCK CLSID-EXTENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?
-# [^\t\n]* (\t.*)? $'xmi,
-
-# # banned suggested names with three or more consecutive spaces
-# qr'(?# BLOCK NAMES WITH SPACES )
-# ^ (.*\t)? N= [^\t\n]* [ ]{3,} 'xmi,
-
-# # block if any component can not be decoded (is encrypted or bad archive)
-# qr'(?# BLOCK IF UNDECIPHERABLE ) ^ (.*\t)? A=U (\t.*)? \z'xmi,
-
-# [ qr'(?# SPECIAL ALLOWANCES - MAGIC NAMES)
-# \A (.*\t)? T=(rpm|cpio|tar|zip|rar|arc|arj|zoo|Z|gz|bz2)
-# \t(.*\t)* N=example\d+[^\t\n]*
-# (\t.*)? $'xmi => 0 ],
-
- # banned filename extensions (in suggested names) anywhere - basic
- qr'(?# BLOCK COMMON NAME EXENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. (exe|vbs|pif|scr|cpl) (\t.*)? $'xmi,
-
-# # banned filename extensions (in suggested names) anywhere - basic+cmd
-# qr'(?# BLOCK COMMON NAME EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (exe|vbs|pif|scr|cpl|bat|cmd|com) (\t.*)? $'xmi,
-
-# # banned filename extensions (in suggested names) anywhere - long
-# qr'(?# BLOCK MORE NAME EXTENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (
-# ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ins|isp|js|jse|lnk|mda|mdb|mde|mdw|mdt|mdz|msc|msi|msp|mst|
-# ops|pcd|pif|prg|reg|scr|sct|shb|shs|vb|vbe|vbs|
-# wmf|wsc|wsf|wsh) (\t.*)? $'xmi,
-
-# qr'(?# BLOCK CURSOR AND ICON NAME EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (ani|cur|ico) (\t.*)? $'xmi,
-
-# # banned filename extensions anywhere - WinZip vulnerability (pre-V9)
-# qr'(?# BLOCK WinZip VULNERABILITY EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (mim|b64|bhx|hqx|xxe|uu|uue) (\t.*)? $'xmi,
-
-);
-
-# use old or new style of banned lookup table; not both to avoid confusion
-#
-# @@banned_filename_maps = (); # to disable old-style
- $banned_namepath_re = undef; # to disable new-style
-
-
-%banned_rules = (
- 'MYNETS-DEFAULT' => new_RE( # permissive set of rules for internal hosts
- [ qr'^\.(rpm|cpio|tar)$' => 0 ], # allow any name/type in Unix archives
- qr'.\.(vbs|pif|scr)$'i, # banned extension - rudimentary
- ),
- 'DEFAULT' => $banned_filename_re,
-);
-
-
-#
-# Section V - Per-recipient and per-sender handling, whitelisting, etc.
-#
-
-# @@virus_lovers_maps list of lookup tables:
-# (this should be considered a policy option, is does not disable checks,
-# see bypass*checks for that!)
-#
-# Exclude certain RECIPIENTS from virus filtering by adding their (lower-cased)
-# envelope e-mail address (or domain only) to one of the lookup tables in
-# the @@virus_lovers_maps list - see README.lookups and examples.
-# Make sure the appropriate form (e.g. external/internal) of address
-# is used in case of virtual domains, or when mapping external to internal
-# addresses, etc. - this is MTA-specific.
-#
-# Notifications would still be generated however (see the overall
-# picture above), and infected mail (if passed) gets additional header:
-# X-AMaViS-Alert: INFECTED, message contains virus: ...
-# (header not inserted with Courier or milter interface!)
-#
-# Setting $final_*_destiny=D_PASS is functionally equivalent to having
-# all recipients match the @@*_lovers_maps.
-#
-# NOTE (milter interface only): in case of multiple recipients,
-# it is only possible to drop or accept the message in its entirety - for all
-# recipients. If all of them are virus lovers, we'll accept mail, but if
-# at least one recipient is not a virus lover, we'll discard the message.
-
-
-# @@bypass_virus_checks_maps list of lookup tables:
-# (this is mainly a time-saving option, unlike virus_lovers* !)
-#
-# Similar in concept to @@virus_lovers_maps, a @@bypass_virus_checks_maps
-# is used to skip entirely the decoding, unpacking and virus checking,
-# but only if ALL recipients match the lookup.
-#
-# @@bypass_virus_checks_maps does NOT GUARANTEE the message will NOT be checked
-# for viruses - this may still happen when there is more than one recipient
-# for a message and not all of them match these lookup tables, or when
-# check result was cached (i.e. the same contents was recently sent to other
-# recipients). To guarantee virus delivery, a recipient must also match
-# @@virus_lovers_maps lookups (but see milter limitations above),
-#
-# The following table summarizes the possible combinations:
-# bypass lover
-# 0 0 useful, check for malware and block it
-# 0 1 useful, check but deliver nevertheless, possibly tagged
-# 1 0 not too useful, free riding on cached or other-people's checks
-# 1 1 useful, no checks if possible, and no effects
-
-# NOTE: it would not be clever to base enabling of virus checks on SENDER
-# address, since there are no guarantees that it is genuine. Many viruses
-# and spam messages fake sender address. To achieve selective filtering
-# based on the source of the mail (e.g. IP address, MTA port number, ...),
-# use mechanisms provided by MTA if available, possibly combined with policy
-# banks feature.
-
-# Similar to lists of lookup tables controlling virus checking, there are
-# counterparts for spam scanning, banned names/types, and headers_checks
-# control:
-# @@spam_lovers_maps,
-# @@banned_files_lovers_maps,
-# @@bad_header_lovers_maps
-# and:
-# @@bypass_spam_checks_maps,
-# @@bypass_banned_checks_maps,
-# @@bypass_header_checks_maps
-
-# Example:
-# @@bypass_header_checks_maps = ( [qw( user@@example.com )] );
-# @@bad_header_lovers_maps = ( [qw( user@@example.com )] );
-
-# The following example disables spam checking altogether,
-# since it matches any recipient e-mail address.
-# @@bypass_spam_checks_maps = (1);
-
-
-# See README.lookups for further detail, and examples below.
-
-# In the following example a list of lookup tables @@virus_lovers_maps
-# contains three elements, the first is a reference to an ACL lookup table
-# (brackets in Perl indicate a ref to a list), the second is a reference
-# to a hash lookup table (curly braces in Perl indicate a ref to a hash),
-# the third is a regexp lookup table, indicated by the type of object
-# created by new_RE() :
-#
-#@@virus_lovers_maps = (
-# [ qw( me@@lab.xxx.com !lab.xxx.com .xxx.com yyy.org ) ],
-# { "postmaster\@@$mydomain" => 1, # double quotes permit variable evaluation
-# 'postmaster@@example.com'=> 1, # in single quotes the '@@' need not be quoted
-# 'abuse@@example.com'=> 1,
-# 'some.user@@' => 1, # this recipient, regardless of domain
-# 'boss@@example.com' => 0, # never, even if domain matches
-# 'example.com' => 1, # this domain, but not its subdomains
-# '.example.com' => 1, # this domain, including its subdomains
-# },
-# new_RE( qr'^(helpdesk|postmaster)@@example\.com$'i ),
-#);
-
-#@@spam_lovers_maps = (
-# ["postmaster\@@$mydomain", 'postmaster@@example.com', 'abuse@@example.com'],
-#);
-
-#@@bad_header_lovers_maps = (
-# ["postmaster\@@", "abuse\@@$mydomain"],
-#);
-
-
-# as an alternative to fiddling with @@_lovers_maps and similar _maps, here
-# is an illustration of using a more general *_by_ccat associative array,
-# introduced with 2.4.0, like %lovers_maps_by_ccat in this example:
-#
-#$lovers_maps_by_ccat{+CC_SPAM} = [
-# read_hash("$MYHOME/etc/spam_lovers.txt"),
-# [qw(postmaster@@example.com abuse@@example.com)],
-#];
-#
-#$lovers_maps_by_ccat{+CC_BANNED} = [
-# { map {lc $_ => 1} # construct a hash lookup table from a list
-# qw(user1@@example.com user2.example.com)
-# },
-#];
-
-
-# to save some typing of quotes and commas, a Perl operator qw can be used
-# to split its argument on whitespace and to quote resulting elements:
-#@@bypass_spam_checks_maps = (
-# [ qw( some.ddd !butnot.example.com .example.com ) ],
-#);
-
-
-# don't run spam check for these RECIPIENT domains:
-# @@bypass_spam_checks_maps = ( [qw( d1.com .d2.com a.d3.com )] );
-# or the other way around (bypass check for all BUT these):
-# @@bypass_spam_checks_maps = ( [qw( !d1.com !.d2.com !a.d3.com . )] );
-# a practical application: don't check outgoing mail for spam:
-# @@bypass_spam_checks_maps = ( [ "!.$mydomain", "." ] );
-# or calculated (negated) from the %local_domains:
-# @@bypass_spam_checks_maps =
-# ( {map {$_ => !$local_domains{$_}} keys %local_domains}, 1);
-# (a downside of which is that such mail will not count as ham in SA bayes db)
-#
-# Note that 'outgoing' is not the same as 'originating from inside'. We refer
-# to 'outgoing' here as 'mail addressed to recipients outside our domain(s)'.
-# The internal-to-internal mail is not outgoing, but is still originating from
-# inside. To base rules on 'originating from inside', the use of a policy bank
-# with 'originating => 1' is needed (such as MYNETS), in conjunction with
-# XFORWARD Postfix extension to SMTP.
-
-# Where to find SQL server(s) and database to support SQL lookups?
-# A list of triples: (dsn,user,passw). (dsn = data source name)
-# More than one entry may be specified for multiple (backup) SQL servers.
-# See 'man DBI', 'man DBD::mysql', 'man DBD::Pg', ... for details.
-# When chroot-ed, accessing SQL server over inet socket may be more convenient.
-#
-# @@lookup_sql_dsn =
-# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
-# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'],
-# ["DBI:SQLite:dbname=$MYHOME/sql/mail_prefs.sqlite", '', ''] );
-# @@storage_sql_dsn = @@lookup_sql_dsn; # none, same, or separate database
-#
-# ('mail' in the example is the database name, choose what you like)
-# With PostgreSQL the dsn (first element of the triple) may look like:
-# 'DBI:Pg:dbname=mail;host=host1'
-
-# The SQL select clause to fetch per-recipient policy settings.
-# The %k will be replaced by a comma-separated list of query addresses
-# (e.g. full address, domain only (stripped level by level), and a catchall).
-# Use ORDER if there is a chance that multiple records will match - the first
-# match wins. If field names are not unique (e.g. 'id'), the later field
-# overwrites the earlier in a hash returned by lookup, which is why we use
-# '*,users.id' instead of just '*'. No need to uncomment the following
-# assignment if the default is ok.
-# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
-# ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
-# ' ORDER BY users.priority DESC';
-#
-# The SQL select clause to check sender in per-recipient whitelist/blacklist
-# The first SELECT argument '?' will be users.id from recipient SQL lookup,
-# the %k will be sender addresses (e.g. full address, domain only, catchall).
-# The default value is:
-# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
-# ' WHERE (wblist.rid=?) AND (wblist.sid=mailaddr.id)'.
-# ' AND (mailaddr.email IN (%k))'.
-# ' ORDER BY mailaddr.priority DESC';
-#
-# To disable SQL white/black list, set to undef (otherwise comment-out
-# the following statement, leaving it at the default value):
-$sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
-
-# Controls the format of timestamps in the field msgs.time_iso:
-# $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
-# defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
-
-# Does a database mail address field with no '@@' character represent a
-# local username or a domain name? By default it implies a username in
-# SQL and LDAP lookups (but represents a domain in hash and acl lookups),
-# so domain names in SQL and LDAP should be specified as '@@domain'.
-# Setting these to true will cause 'xxx' to be interpreted as a domain
-# name, just like in hash or acl lookups.
-#
-# $sql_lookups_no_at_means_domain = 0; # default is 0
-# $ldap_lookups_no_at_means_domain = 0; # default is 0
-
-# Here is an example of a SELECT clause that fabricates an artificial 'users'
-# table from actual table 'postfix_domains' containing a field 'domain_name'.
-# The effect is that domains listed in the 'postfix_domains' table will be
-# treated as local by amavisd, and be given settings from a policy id 99
-# if such a policy id exists, or just fall back to static lookups.
-# The user.id (with a value 1) is there only to provide a user id (same id
-# for all listed domains) when global SQL-based white/blacklisting is used.
-#
-# $sql_lookups_no_at_means_domain = 1;
-# $sql_select_policy =
-# 'SELECT *, user.id'.
-# ' FROM (SELECT 1 as id, 99 as policy_id, "Y" AS local'.
-# ' FROM postfix_domains WHERE domain_name IN (%k)) AS user'.
-# ' LEFT JOIN policy ON policy_id=policy.id';
-
-# If passing malware to certain recipients ($final_*_destiny=D_PASS or
-# *_lovers), the recipient-based lookup tables @@addr_extension_*_maps may
-# return a string, which (if nonempty) will be added as an address extension
-# to the local-part of the recipient's address. This extension may be used
-# by the final local delivery agent (LDA) to place such mail into different
-# subfolders (the extension is usually interpreted as a folder name).
-# This is sometimes known as the 'plus addressing'. Appending address
-# extensions is prevented when:
-# - recipient does not match lookup tables @@local_domains_maps;
-# - lookup into corresponding @@addr_extension_*_maps results
-# in an empty string or undef;
-# - $recipient_delimiter is empty (see below)
-# LDAs usually default to stripping away address extension if no special
-# handling is specified or if a named subfolder or alias does not exist,
-# so adding address extensions normally does no harm.
-
-# @@addr_extension_virus_maps = ('virus'); # defaults to empty
-# @@addr_extension_spam_maps = ('spam'); # defaults to empty
-# @@addr_extension_banned_maps = ('banned'); # defaults to empty
-# @@addr_extension_bad_header_maps = ('badh'); # defaults to empty
-#
-# A more complex example:
-# @@addr_extension_virus_maps = (
-# {'sub.example.com'=>'infected', '.example.com'=>'filtered'}, 'virus' );
-
-# Delimiter between local part of the envelope recipient address and address
-# extension (which can optionally be added, see @@addr_extension_*_maps. E.g.
-# recipient address <user@@example.com> is changed to <user+virus@@example.com>.
-#
-# Delimiter must match the equivalent (final) MTA delimiter setting.
-# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
-# Setting it to an empty string or to undef disables adding extensions
-# regardless of $addr_extension_*_maps.
-
-# $recipient_delimiter = '+'; # (default is undef, i.e. disabled)
-
-# true: replace extension; false: append extension
-# $replace_existing_extension = 1; # (default is true)
-
-# Affects matching of localpart of e-mail addresses (left of '@@')
-# in lookups: true = case sensitive, false = case insensitive
-$localpart_is_case_sensitive = 0; # (default is false)
-
-
-# ENVELOPE SENDER SOFT-WHITELISTING / SOFT-BLACKLISTING
-
-# Instead of hard black- or whitelisting, a softer approach is to add
-# score points (penalties) to the SA score for mail from certain senders.
-# Positive points lean towards blacklisting, negative towards whitelisting.
-# This is much like adding SA rules or using its white/blacklisting, except
-# that here only envelope sender addresses are considered (not addresses
-# in a mail header), and that score points can be assigned per-recipient
-# (or globally), and the assigned penalties are customarily much lower
-# than the default SA white/blacklisting score.
-#
-# The table structure is similar to $per_recip_blacklist_sender_lookup_tables
-# i.e. the first level key is recipient, pointing to by-sender lookup tables.
-# The essential difference is that scores from _all_ matching by-recipient
-# lookups (not just the first that matches) are summed to give the final
-# score boost. That means that both the site and domain administrators,
-# as well as the recipient can have a say on the final score.
-#
-# NOTE: keep hash keys in lowercase, either manually or by using function lc
-
-@@score_sender_maps = ({ # a by-recipient hash lookup table
-
-# # per-recipient personal tables (NOTE: positive: black, negative: white)
-# 'user1@@example.com' => [{'bla-mobile.press@@example.com' => 10.0}],
-# 'user3@@example.com' => [{'.ebay.com' => -3.0}],
-# 'user4@@example.com' => [{'cleargreen@@cleargreen.com' => -7.0,
-# '.cleargreen.com' => -5.0}],
-
- # site-wide opinions about senders (the '.' matches any recipient)
- '.' => [ # the _first_ matching sender determines the score boost
-
- new_RE( # regexp-type lookup table, just happens to be all soft-blacklist
- [qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou)@@'i => 5.0],
- [qr'^(greatcasino|investments|lose_weight_today|market\.alert)@@'i=> 5.0],
- [qr'^(money2you|MyGreenCard|new\.tld\.registry|opt-out|opt-in)@@'i=> 5.0],
- [qr'^(optin|saveonlsmoking2002k|specialoffer|specialoffers)@@'i => 5.0],
- [qr'^(stockalert|stopsnoring|wantsome|workathome|yesitsfree)@@'i => 5.0],
- [qr'^(your_friend|greatoffers)@@'i => 5.0],
- [qr'^(inkjetplanet|marketopt|MakeMoney)\d*@@'i => 5.0],
- [ qr'@@strato(?:-rz)\.de$'i => -5.0 ],
- [ qr'^Doris\.Hennig@@BA-MH\.Verwalt-Berlin\.de$'i => -5.0 ],
- [ qr'^doris@@hennig-berlin\.org$'i => -5.0 ],
- ),
-
-# read_hash("/var/amavis/sender_scores_sitewide"),
-
- { # a hash-type lookup table (associative array)
- 'nobody@@cert.org' => -3.0,
- 'cert-advisory@@us-cert.gov' => -3.0,
- 'owner-alert@@iss.net' => -3.0,
- 'slashdot@@slashdot.org' => -3.0,
- 'securityfocus.com' => -3.0,
- 'ntbugtraq@@listserv.ntbugtraq.com' => -3.0,
- 'security-alerts@@linuxsecurity.com' => -3.0,
- 'mailman-announce-admin@@python.org' => -3.0,
- 'amavis-user-admin@@lists.sourceforge.net'=> -3.0,
- 'amavis-user-bounces@@lists.sourceforge.net' => -3.0,
- 'spamassassin.apache.org' => -3.0,
- 'notification-return@@lists.sophos.com' => -3.0,
- 'owner-postfix-users@@postfix.org' => -3.0,
- 'owner-postfix-announce@@postfix.org' => -3.0,
- 'owner-sendmail-announce@@lists.sendmail.org' => -3.0,
- 'sendmail-announce-request@@lists.sendmail.org' => -3.0,
- 'donotreply@@sendmail.org' => -3.0,
- 'ca+envelope@@sendmail.org' => -3.0,
- 'noreply@@freshmeat.net' => -3.0,
- 'owner-technews@@postel.acm.org' => -3.0,
- 'ietf-123-owner@@loki.ietf.org' => -3.0,
- 'cvs-commits-list-admin@@gnome.org' => -3.0,
- 'rt-users-admin@@lists.fsck.com' => -3.0,
- 'clp-request@@comp.nus.edu.sg' => -3.0,
- 'surveys-errors@@lists.nua.ie' => -3.0,
- 'emailnews@@genomeweb.com' => -5.0,
- 'yahoo-dev-null@@yahoo-inc.com' => -3.0,
- 'returns.groups.yahoo.com' => -3.0,
- 'clusternews@@linuxnetworx.com' => -3.0,
- lc('lvs-users-admin@@LinuxVirtualServer.org') => -3.0,
- lc('owner-textbreakingnews@@CNNIMAIL12.CNN.COM') => -5.0,
- 'niels@@google.com' => -3.0,
- 'kameu@@gmx.de' => -3.0,
-
- # soft-blacklisting (positive score)
- 'sender@@example.net' => 3.0,
- '.example.net' => 1.0,
-
- },
- ], # end of site-wide tables
-});
-
-
-# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
-# (affects spam checking only, has no effect on virus and other checks)
-
-# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
-# senders even if the message would be recognized as spam. Effectively, for
-# the specified senders, message recipients temporarily become 'spam_lovers'.
-# To avoid surprises, whitelisted sender also suppresses inserting/editing
-# the tag2-level header fields (X-Spam-*, Subject), appending spam address
-# extension, and quarantining.
-#
-# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
-# Effectively, for messages from blacklisted envelope sender addresses, spam
-# level is artificially pushed high, and the normal spam processing applies,
-# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
-# reactions to spam, including possible rejection. If the message nevertheless
-# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
-# in the 'X-Spam-Status' header field, but the reported spam value and
-# set of tests in this report header field (if available from SpamAssassin,
-# which may or may not have been called) is not adjusted.
-#
-# A sender may be both white- and blacklisted at the same time, settings
-# are independent. For example, being both white- and blacklisted, message
-# is delivered to recipients, but is not tagged as spam (X-Spam-Flag: No;
-# X-Spam-Status: No, ...), but the reported spam level (if computed) may
-# still indicate high spam score.
-#
-# If ALL recipients of the message either white- or blacklist the sender,
-# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
-#
-# The following variables (lists of lookup tables) are available,
-# with the semantics and syntax as specified in README.lookups:
-# @@whitelist_sender_maps, @@blacklist_sender_maps
-
-# SOME EXAMPLES:
-#
-#ACL:
-# @@whitelist_sender_maps = ( ['.example.org', '.example.net'] );
-# @@whitelist_sender_maps = ( [qw(.example.org .example.net)] ); # same thing
-#
-# @@whitelist_sender_maps = ( [".$mydomain"] ); # $mydomain and its subdomains
-# NOTE: This is not a reliable way of turning off spam checks for
-# locally-originating mail, as sender address can easily be faked.
-# To reliably avoid spam-scanning outgoing mail, use @@bypass_spam_checks_maps
-# for nonlocal recipients. To reliably avoid spam scanning for locally
-# originating mail (including internal-to-internal mail), recognized by
-# the original SMTP client IP address matching @@mynetworks, use policy bank
-# MYNETS, adjust @@mynetworks, and turn on XFORWARD in the Postfix smtp client
-# service feeding amavisd.
-
-#with regexps:
-# @@whitelist_sender_maps = ( new_RE(
-# qr'^postmaster@@.*\bexample\.com$'i,
-# qr'^owner-[^@@]*@@'i, qr'-request@@'i,
-# qr'\.example\.com$'i
-# ));
-
-
-# illustrates the use of regexp lookup table:
-
-@@blacklist_sender_maps = ( new_RE(
- qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@@'i,
- qr'^(investments|lose_weight_today|market\.alert|money2you|MyGreenCard)@@'i,
- qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@@'i,
- qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@@'i,
- qr'^(workathome|yesitsfree|your_friend|greatoffers)@@'i,
- qr'^(inkjetplanet|marketopt|MakeMoney)\d*@@'i,
-));
-
-
-# NOTE: whitelisting is becoming deprecated because sender address is
-# all too often faked; use @@score_sender_maps for soft-whitelisting!
-#
-# Illustrates the use of several lookup tables:
-#
-# @@whitelist_sender_maps = (
-#
-# # read_hash("$MYHOME/whitelist_sender"), # a hash table read from a file
-#
-# # and another hash lookup table constructed in-line, with keys lowercased:
-# { map {lc $_ => 1} qw(
-# nobody@@cert.org
-# cert-advisory@@us-cert.gov
-# owner-alert@@iss.net
-# slashdot@@slashdot.org
-# bugtraq@@securityfocus.com
-# NTBUGTRAQ@@LISTSERV.NTBUGTRAQ.COM
-# security-alerts@@linuxsecurity.com
-# amavis-user-admin@@lists.sourceforge.net
-# amavis-user-bounces@@lists.sourceforge.net
-# notification-return@@lists.sophos.com
-# mailman-announce-admin@@python.org
-# owner-postfix-users@@postfix.org
-# owner-postfix-announce@@postfix.org
-# owner-sendmail-announce@@lists.sendmail.org
-# sendmail-announce-request@@lists.sendmail.org
-# owner-technews@@postel.ACM.ORG
-# lvs-users-admin@@LinuxVirtualServer.org
-# ietf-123-owner@@loki.ietf.org
-# cvs-commits-list-admin@@gnome.org
-# rt-users-admin@@lists.fsck.com
-# clp-request@@comp.nus.edu.sg
-# surveys-errors@@lists.nua.ie
-# emailNews@@genomeweb.com
-# owner-textbreakingnews@@CNNIMAIL12.CNN.COM
-# yahoo-dev-null@@yahoo-inc.com
-# returns.groups.yahoo.com
-# )},
-#
-# # { '' => 1 }, # and another one, containing just an empty reverse path (DSN)
-#
-# );
-
-
-# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
-
-# The same semantics as for global white/blacklisting applies, but this
-# time each recipient (or its domain, or subdomain, ...) can be given
-# an individual lookup table for matching senders. The per-recipient lookups
-# take precedence over the global lookups, which serve as a fallback default.
-
-# Specify a two-level lookup table: the key for the outer table is recipient,
-# and the result should be an inner lookup table (hash or ACL or RE),
-# where the key used will be the sender. (Note that this structure is flatter
-# than @@score_sender_maps, where the first level result is a ref to a _list_
-# of inner lookup tables, not a ref to a single lookup table.)
-#
-#$per_recip_blacklist_sender_lookup_tables = {
-# 'user1@@my.example.com'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@@'i),
-# 'user2@@my.example.com'=>[qw( spammer@@d1.example,org .d2.example,org )],
-#};
-#$per_recip_whitelist_sender_lookup_tables = {
-# 'user@@my.example.com' => [qw( friend@@example.org .other.example.org )],
-# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
-# '.my2.example.com' => read_hash("$MYHOME/my2-wl.dat"),
-# 'abuse@@' => { 'postmaster@@'=>1,
-# 'cert-advisory-owner@@cert.org'=>1, 'owner-alert@@iss.net'=>1 },
-#};
-
-
-#
-# Section VI - Resource limits
-#
-
-# Sanity limit to the number of allowed recipients per SMTP transaction
-# $smtpd_recipient_limit = 1100; # (default is 1100)
-
-# Resource limits to protect unpackers, decompressors and virus scanners
-# against mail bombs (e.g. 42.zip)
-
-
-# Maximum recursion level for extraction/decoding (0 or undef disables limit)
-$MAXLEVELS = 14; # (default is undef, no limit)
-
-# Maximum number of extracted files (0 or undef disables the limit)
-$MAXFILES = 1500; # (default is undef, no limit)
-
-# For the cumulative total of all decoded mail parts we set max storage size
-# to defend against mail bombs. Even though parts may be deleted (replaced
-# by decoded text) during decoding, the size they occupied is _not_ returned
-# to the quota pool.
-#
-# Parameters to storage quota formula for unpacking/decoding/decompressing
-# Formula:
-# quota = max($MIN_EXPANSION_QUOTA,
-# $mail_size*$MIN_EXPANSION_FACTOR,
-# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
-# In plain words (later condition overrules previous ones):
-# allow MAX_EXPANSION_FACTOR times initial mail size,
-# but not more than MAX_EXPANSION_QUOTA,
-# but not less than MIN_EXPANSION_FACTOR times initial mail size,
-# but never less than MIN_EXPANSION_QUOTA
-#
-$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
-$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
-$MIN_EXPANSION_FACTOR = 5; # times original mail size (default is 5)
-$MAX_EXPANSION_FACTOR = 500; # times original mail size (default is 500)
-
-# expiration time of cached results: time to live in seconds
-# (how long the result of a virus/spam test remains valid)
-$virus_check_negative_ttl= 3*60; # time to remember that mail was not infected
-$virus_check_positive_ttl= 30*60; # time to remember that mail was infected
-$spam_check_negative_ttl = 10*60; # time to remember that mail was not spam
-$spam_check_positive_ttl = 30*60; # time to remember that mail was spam
-#
-# NOTE:
-# Cache size will be determined by the largest of the $*_ttl values.
-# Depending on the mail rate, the cache database may grow quite large.
-# Reasonable compromise for the max value is 15 minutes to 2 hours.
-
-#
-# Section VII - External programs, virus scanners
-#
-
-# Specify a path string, which is a colon-separated string of directories
-# (no trailing slashes!) to be assigned to the environment variable PATH
-# and to serve for locating external programs below.
-
-# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
-# relative to the chroot directory specified;
-
-$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin:/opt/bin';
-
-# For external programs specify one string or a search list of strings (first
-# match wins). The string (or: each string in a list) may be an absolute path,
-# or just a program name, to be located via $path;
-# Empty string or undef (=default) disables the use of that external program.
-# Optionally command arguments may be specified - only the first substring
-# up to the whitespace is used for file searching.
-
-$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
-$dspam = 'dspam';
-
-# A list of pairs or n-tuples: [short-type, code_ref, optional-args...].
-# Maps short types to a decoding routine, the first match wins.
-# Arguments beyond the first two can be program path string (or a listref of
-# paths to be searched) or a reference to a variable containing such a path,
-# which allows for lazy evaluation, making possible to assign values to
-# legacy configuration variables even after the assignment to @@decoders.
-#
-@@decoders = (
- ['mail', \&do_mime_decode],
- ['asc', \&do_ascii],
- ['uue', \&do_ascii],
- ['hqx', \&do_ascii],
- ['ync', \&do_ascii],
- ['F', \&do_uncompress, ['unfreeze','freeze -d','melt','fcat'] ],
- ['Z', \&do_uncompress, ['uncompress','gzip -d','zcat'] ],
- ['gz', \&do_uncompress, 'gzip -d'],
- ['gz', \&do_gunzip],
- ['bz2', \&do_uncompress, 'bzip2 -d'],
- ['lzo', \&do_uncompress, 'lzop -d'],
- ['rpm', \&do_uncompress, ['rpm2cpio.pl','rpm2cpio'] ],
- ['cpio', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['tar', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['deb', \&do_ar, 'ar'],
-# ['a', \&do_ar, 'ar'], # unpacking .a seems an overkill
- ['zip', \&do_unzip],
- ['7z', \&do_7zip, ['7zr','7za','7z'] ],
- ['rar', \&do_unrar, ['rar','unrar'] ],
- ['arj', \&do_unarj, ['arj','unarj'] ],
- ['arc', \&do_arc, ['nomarch','arc'] ],
- ['zoo', \&do_zoo, ['zoo','unzoo'] ],
- ['lha', \&do_lha, 'lha'],
-# ['doc', \&do_ole, 'ripole'],
- ['cab', \&do_cabextract, 'cabextract'],
- ['tnef', \&do_tnef_ext, 'tnef'],
- ['tnef', \&do_tnef],
-# ['sit', \&do_unstuff, 'unstuff'], # broken/unsafe decoder
- ['exe', \&do_executable, ['rar','unrar'], 'lha', ['arj','unarj'] ],
-);
-
-
-# SpamAssassin settings
-
-# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
-# of the option local_tests_only. See Mail::SpamAssassin man page.
-# If set to 1, no SA tests that require internet access will be performed.
-#
-$sa_local_tests_only = 0; # only tests which do not require internet access?
-#$sa_auto_whitelist = 1; # turn on AWL in SA 2.63 or older (irrelevant
- # for SA 3.0, its cf option is use_auto_whitelist)
-
-$sa_mail_body_size_limit = 400*1024; # don't waste time on SA if mail is larger
- # (less than 1% of spam is > 64k)
- # default: undef, no limitations
-
-# default values, customarily used in the @@spam_*_level_maps as the last entry
-$sa_tag_level_deflt = 2.0; # add spam info headers if at, or above that level;
- # undef is interpreted as lower than any spam level
-$sa_tag2_level_deflt = 6.31;# add 'spam detected' headers at that level to
- # passed mail, adding address extensions;
-$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
- # at or above that level: bounce/reject/drop,
- # quarantine
-$sa_dsn_cutoff_level = 9; # spam level beyond which a DSN is not sent,
- # effectively turning D_BOUNCE into D_DISCARD;
- # undef disables this feature and is a default;
-# see also $sa_quarantine_cutoff_level above, which only controls quarantining
-
-# $penpals_bonus_score = 5; # (positive) score by which spam score is lowered
- # when sender is known to have previously received mail from our
- # local user from this mail system; zero or undef disables penpals
- # lookups in SQL; default: undef
-# $penpals_halflife = 10*24*60*60; #exponential decay time constant in seconds;
- # penpal bonus is halved for each halflife period from the last mail
- # sent by a local user to a current mail's sender; default: 7 days
-# $penpals_threshold_low = 1.0; # no need for pen pals lookup on low spam score
-# $penpals_threshold_high = $sa_kill_level_deflt; # don't waste time on hi spam
-
-# $bounce_killer_score = 100; # spam score points to add for joe-jobbed bounces
- # bounce killer needs operational SQL logging (pen pals) !
-
-# advanced example specifying per-recipient values using a hash lookup:
-#@@spam_tag_level_maps = (\$sa_tag_level_deflt); # this is a default
-#@@spam_tag2_level_maps = (
-# { 'user1@@example.com' => 8.0, '.example.com' => 6.0 },
-# \$sa_tag2_level_deflt, # catchall default
-#);
-#@@spam_kill_level_maps = (
-# { 'user1@@example.com' => 8.0, '.example.com' => 6.0 },
-# \$sa_kill_level_deflt, # catchall default
-#);
-#@@spam_dsn_cutoff_level_maps = (
-# { 'user1@@example.com' => 10, '.example.com' => 15 },
-# \$sa_dsn_cutoff_level, # catchall default
-#);
-
-# selectively trim down bounces to domains sending their own bounces with
-# non-null return path, to frequently abused domains, or to those sending
-# marginal spam
-@@spam_dsn_cutoff_level_bysender_maps = (
- { # an associative array (hash) lookup table, use lowercase keys
- 'virgilio.it' => 7, 'mail.ru' => 7, '0451.com' => 7,
- 'yahoo.co.uk' => 7, 'yahoo.co.jp' => 7, 'nobody@@' => 7,
- 'noreply@@' => 0, 'no-reply@@' => 0, 'donotreply@@' => 0,
- 'opt-in@@' => 0, 'opt-out@@' => 0, 'yahoo-dev-null@@' => 0,
- '.optin-out.com' => 0, 'daily@@astrocenter.com' => 0,
- 'spamadmin@@fraunhofer.de'=> 7, # Sophos PureMessage spam bounces
- },
- \$sa_dsn_cutoff_level, # catchall default value
-);
-
-# a quick reference:
-# tag_level contents category: CC_CLEAN,
-# controls adding the X-Spam-Status and X-Spam-Level headers,
-# tag2_level contents category: CC_SPAMMY,
-# controls adding 'X-Spam-Flag: YES', editing (tagging) Subject,
-# and adding address extensions,
-# tag3_level contents category: CC_SPAMMY, minor category 1,
-# like tag2, but may insert different Subject tag
-# e.g. @@spam_subject_tag3_maps=('***BLATANT*SPAM*** ');
-# kill_level contents category: CC_SPAM,
-# controls 'evasive actions' (reject, quarantine);
-# it only makes sense to maintain the relationship:
-# tag_level <= tag2_level <= tag3_level <= kill_level <
-# < dsn_cutoff_level <= quarantine_cutoff_level
-
-# string to prepend to Subject header field when message exceeds tag2 level
-#$sa_spam_subject_tag = '***SPAM*** '; # (defaults to undef, disabled)
- # (only seen when spam is passed and recipient is
- # in local_domains*)
-# more examples, using @@*_maps directly:
-#@@spam_subject_tag_maps = ('[possible-spam:_SCORE_] ');
-#@@spam_subject_tag2_maps = ('***SPAM*** _SCORE_ (_REQD_) ');
-#@@spam_subject_tag3_maps = ('***BLATANT*SPAM**** _SCORE_ (_REQD_) ');
-# another examples, using _maps_by_ccat:
-#$subject_tag_maps_by_ccat{+CC_CLEAN} = [
-# { lc('TestUser@@example.net') =>
-# '**TEST:_U_,hits=_SCORE_,req=_REQD_,amid=_TASKID_,mid=_MAILID_**' } ];
-
-#$sa_spam_modifies_subj = 1; # in @@spam_modifies_subj_maps, default is true
-
-# Example: modify Subject for all local recipients except user@@example.com
-#@@spam_modifies_subj_maps = ( [qw( !user@@example.com . )] );
-
-#$sa_spam_level_char = '*'; # char for X-Spam-Level bar, defaults to '*';
- # undef or empty disables inserting X-Spam-Level
-#$sa_spam_report_header = 0; # insert X-Spam-Report header field? default false
-
-# stop anti-virus scanning when the first scanner detects a virus?
-#$first_infected_stops_scan = 1; # default is false, all scanners in a section
- # are called
-
-# @@av_scanners is a list of n-tuples, where fields semantics is:
-# 1. av scanner plain name, to be used in log and reports;
-# 2a.scanner program name; this string will be submitted to subroutine
-# find_external_programs(), which will try to find the full program path
-# name during startup; if program is not found, this scanner is disabled.
-# Besides a simple string (full program path name or just the basename
-# to be looked for in PATH), this may be an array ref of alternative
-# program names or full paths - the first match in the list will be used;
-# 2b.alternatively, this second field may be a subroutine reference,
-# and the whole n-tuple entry is passed to it as args; it should return
-# a triple: ($scan_status,$output,$virusnames_ref), where:
-# - $scan_status is: true if a virus was found, 0 if no viruses,
-# undef if scanner was unable to complete its job (failed);
-# - $output is an optional result string to appear in logging and macro %v;
-# - $virusnames_ref is a ref to a list of detected virus names (may be
-# undef or a ref to an empty list);
-# 3. command arguments to be given to the scanner program;
-# a substring {} will be replaced by the directory name to be scanned, i.e.
-# "$tempdir/parts", a "*" will be replaced by base file names of parts;
-# 4. an array ref of av scanner exit status values, or a regexp (to be
-# matched against scanner output), indicating NO VIRUSES found;
-# a special case is a value undef, which does not claim file to be clean
-# (i.e. it never matches, similar to []), but suppresses a failure warning;
-# to be used when the result is inconclusive (useful for specialized and
-# quick partial scanners such as jpeg checker);
-# 5. an array ref of av scanner exit status values, or a regexp (to be
-# matched against scanner output), indicating VIRUSES WERE FOUND;
-# a value undef may be used and it never matches (for consistency with 4.);
-# Note: the virus match prevails over a 'not found' match, so it is safe
-# even if the no. 4. matches for viruses too;
-# 6. a regexp (to be matched against scanner output), returning a list
-# of virus names found, or a sub ref, returning such a list when given
-# scanner output as argument;
-# 7. and 8.: (optional) subroutines to be executed before and after scanner
-# (e.g. to set environment or current directory);
-# see examples for these at KasperskyLab AVP and NAI uvscan.
-
-# NOTES:
-#
-# - NOT DEFINING @@av_scanners (e.g. setting it to empty list, or deleting the
-# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
-# (which can be handy if all you want to do is spam scanning);
-#
-# - the order matters: although _all_ available entries from the list
-# are tried regardless of their verdict, scanners are run in the order
-# specified: the report from the first one detecting a virus will be used
-# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
-# see also $first_infected_stops_scan;
-#
-# - it doesn't hurt to keep an unused command line scanner entry in the list
-# if the program can not be found; the path search is only performed once
-# during the program startup;
-#
-# COROLLARY: to disable a scanner that _does_ exist on your system,
-# comment out its entry or use undef or '' as its program name/path
-# (second parameter). An example where this is almost a must: disable
-# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
-# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
-# program happens to have a name matching one of the entries ('sweep'
-# again comes to mind);
-#
-# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
-# for interfacing (where the second parameter starts with \&).
-# Keeping such entry and not having a corresponding virus scanner daemon
-# causes an unnecessary connection attempt (which eventually times out,
-# but it wastes precious time). For this reason the daemonized entries
-# are commented in the distribution - just remove the '#' where needed.
-#
-# CERT list of av resources: http://www.cert.org/other_sources/viruses.html
-
-@@av_scanners = (
-
-# ### http://www.clanfield.info/sophie/ (http://www.vanja.com/tools/sophie/)
-# ['Sophie',
-# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
-# ['Sophos SAVI', \&sophos_savi ],
-
-### http://www.clamav.net/
-['ClamAV-clamd',
- \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
- qr/\bOK$/m, qr/\bFOUND$/m,
- qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# NOTE: run clamd under the same user as amavisd, or run it under its own
-# uid such as clamav, add user clamav to the amavis group, and then add
-# AllowSupplementaryGroups to clamd.conf;
-# NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-
-# ### http://www.clamav.net/ and CPAN (memory-hungry! clamd is preferred)
-# # note that Mail::ClamAV requires perl to be build with threading!
-# ['Mail::ClamAV', \&ask_clamav, "*", [0], [1], qr/^INFECTED: (.+)/m ],
-
-# ### http://www.openantivirus.org/
-# ['OpenAntiVirus ScannerDaemon (OAV)',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
-# qr/^OK/m, qr/^FOUND: /m, qr/^FOUND: (.+)/m ],
-
-# ### http://www.vanja.com/tools/trophie/
-# ['Trophie',
-# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.grisoft.com/
-# ['AVG Anti-Virus',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:55555'],
-# qr/^200/m, qr/^403/m, qr/^403 .*?: ([^\r\n]+)/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot fpscand', # F-PROT Antivirus for BSD/Linux/Solaris, version 6
-# \&ask_daemon,
-# ["SCAN FILE {}/*\n", '127.0.0.1:10200'],
-# qr/^(0|8|64) /m,
-# qr/^([1235679]|1[01345]) |<[^>:]*(?i)(infected|suspicious|unwanted)/m,
-# qr/(?i)<[^>:]*(?:infected|suspicious|unwanted)[^>:]*: ([^>]*)>/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot f-protd', # old version
-# \&ask_daemon,
-# ["GET {}/*?-dumb%20-archive%20-packed HTTP/1.0\r\n\r\n",
-# ['127.0.0.1:10200', '127.0.0.1:10201', '127.0.0.1:10202',
-# '127.0.0.1:10203', '127.0.0.1:10204'] ],
-# qr/(?i)<summary[^>]*>clean<\/summary>/m,
-# qr/(?i)<summary[^>]*>infected<\/summary>/m,
-# qr/(?i)<name>(.+)<\/name>/m ],
-
-# ### http://www.sald.com/, http://www.dials.ru/english/, http://www.drweb.ru/
-# ['DrWebD', \&ask_daemon, # DrWebD 4.31 or later
-# [pack('N',1). # DRWEBD_SCAN_CMD
-# pack('N',0x00280001). # DONT_CHANGEMAIL, IS_MAIL, RETURN_VIRUSES
-# pack('N', # path length
-# length("$TEMPBASE/amavis-yyyymmddTHHMMSS-xxxxx/parts/pxxx")).
-# '{}/*'. # path
-# pack('N',0). # content size
-# pack('N',0),
-# '/var/drweb/run/drwebd.sock',
-# # '/var/amavis/var/run/drwebd.sock', # suitable for chroot
-# # '/usr/local/drweb/run/drwebd.sock', # FreeBSD drweb ports default
-# # '127.0.0.1:3000', # or over an inet socket
-# ],
-# qr/\A\x00[\x10\x11][\x00\x10]\x00/sm, # IS_CLEAN,EVAL_KEY; SKIPPED
-# qr/\A\x00[\x00\x01][\x00\x10][\x20\x40\x80]/sm,# KNOWN_V,UNKNOWN_V,V._MODIF
-# qr/\A.{12}(?:infected with )?([^\x00]+)\x00/sm,
-# ],
-# # NOTE: If using amavis-milter, change length to:
-# # length("$TEMPBASE/amavis-milter-xxxxxxxxxxxxxx/parts/pxxx").
-
- ### http://www.kaspersky.com/ (kav4mailservers)
- ['KasperskyLab AVP - aveclient',
- ['/usr/local/kav/bin/aveclient','/usr/local/share/kav/bin/aveclient',
- '/opt/kav/5.5/kav4mailservers/bin/aveclient','aveclient'],
- '-p /var/run/aveserver -s {}/*',
- [0,3,6,8], qr/\b(INFECTED|SUSPICION|SUSPICIOUS)\b/m,
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.+)/m,
- ],
- # NOTE: one may prefer [0],[2,3,4,5], depending on how suspicious,
- # currupted or protected archives are to be handled
-
- ### http://www.kaspersky.com/
- ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp'],
- '-* -P -B -Y -O- {}', [0,3,6,8], [2,4], # any use for -A -K ?
- qr/infected: (.+)/m,
- sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
- sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
- ### The kavdaemon and AVPDaemonClient have been removed from Kasperky
- ### products and replaced by aveserver and aveclient
- ['KasperskyLab AVPDaemonClient',
- [ '/opt/AVP/kavdaemon', 'kavdaemon',
- '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
- '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
- '/opt/AVP/avpdc', 'avpdc' ],
- "-f=$TEMPBASE {}", [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/m ],
- # change the startup-script in /etc/init.d/kavd to:
- # DPARMS="-* -Y -dl -f=/var/amavis /var/amavis"
- # (or perhaps: DPARMS="-I0 -Y -* /var/amavis" )
- # adjusting /var/amavis above to match your $TEMPBASE.
- # The '-f=/var/amavis' is needed if not running it as root, so it
- # can find, read, and write its pid file, etc., see 'man kavdaemon'.
- # defUnix.prf: there must be an entry "*/var/amavis" (or whatever
- # directory $TEMPBASE specifies) in the 'Names=' section.
- # cd /opt/AVP/DaemonClients; configure; cd Sample; make
- # cp AvpDaemonClient /opt/AVP/
- # su - vscan -c "${PREFIX}/kavdaemon ${DPARMS}"
-
- ### http://www.centralcommand.com/
- ['CentralCommand Vexira (new) vascan',
- ['vascan','/usr/lib/Vexira/vascan'],
- "-a s --timeout=60 --temp=$TEMPBASE -y $QUARANTINEDIR ".
- "--log=/var/log/vascan.log {}",
- [0,3], [1,2,5],
- qr/(?x)^\s* (?:virus|iworm|macro|mutant|sequence|trojan)\ found:\ ( [^\]\s']+ )\ \.\.\.\ /m ],
- # Adjust the path of the binary and the virus database as needed.
- # 'vascan' does not allow to have the temp directory to be the same as
- # the quarantine directory, and the quarantine option can not be disabled.
- # If $QUARANTINEDIR is not used, then another directory must be specified
- # to appease 'vascan'. Move status 3 to the second list if password
- # protected files are to be considered infected.
-
- ### http://www.avira.com/
- ### Avira AntiVir (formerly H+BEDV) or (old) CentralCommand Vexira Antivirus
- ['Avira AntiVir', ['antivir','vexira'],
- '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/m,
- qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
- (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/m ],
- # NOTE: if you only have a demo version, remove -z and add 214, as in:
- # '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,
-
- ### http://www.commandsoftware.com/
- ['Command AntiVirus for Linux', 'csav',
- '-all -archive -packed {}', [50], [51,52,53],
- qr/Infection: (.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec CarrierScan via Symantec CommandLineScanner',
- 'cscmdline', '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
- qr/^Files Infected:\s+0$/m, qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec AntiVirus Scan Engine',
- 'savsecls', '-server 127.0.0.1:7777 -mode scanrepair -details -verbose {}',
- [0], qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
- # NOTE: check options and patterns to see which entry better applies
-
-# ### http://www.f-secure.com/products/anti-virus/ version 4.65
-# ['F-Secure Antivirus for Linux servers',
-# ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
-# '--delete=no --disinf=no --rename=no --archive=yes --auto=yes '.
-# '--dumb=yes --list=no --mime=yes {}', [0], [3,6,8],
-# qr/(?:infection|Infected|Suspected): (.+)/m ],
-
- ### http://www.f-secure.com/products/anti-virus/ version 5.52
- ['F-Secure Antivirus for Linux servers',
- ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
- '--virus-action1=report --archive=yes --auto=yes '.
- '--dumb=yes --list=no --mime=yes {}', [0], [3,4,6,8],
- qr/(?:infection|Infected|Suspected|Riskware): (.+)/m ],
- # NOTE: internal archive handling may be switched off by '--archive=no'
- # to prevent fsav from exiting with status 9 on broken archives
-
-# ### http://www.avast.com/
-# ['avast! Antivirus daemon',
-# \&ask_daemon, # greets with 220, terminate with QUIT
-# ["SCAN {}\015\012QUIT\015\012", '/var/run/avast4/mailscanner.sock'],
-# qr/\t\[\+\]/m, qr/\t\[L\]\t/m, qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
-# ### http://www.avast.com/
-# ['avast! Antivirus - Client/Server Version', 'avastlite',
-# '-a /var/run/avast4/mailscanner.sock -n {}', [0], [1],
-# qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
- ['CAI InoculateIT', 'inocucmd', # retired product
- '-sec -nex {}', [0], [100],
- qr/was infected by virus (.+)/m ],
- # see: http://www.flatmtn.com/computer/Linux-Antivirus_CAI.html
-
- ### http://www3.ca.com/Solutions/Product.asp?ID=156 (ex InoculateIT)
- ['CAI eTrust Antivirus', 'etrust-wrapper',
- '-arc -nex -spm h {}', [0], [101],
- qr/is infected by virus: (.+)/m ],
- # NOTE: requires suid wrapper around inocmd32; consider flag: -mod reviewer
- # see http://marc.theaimsgroup.com/?l=amavis-user&m=109229779912783
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir for Linux (beta)', ['mks32','mks'],
- '-s {}/*', [0], [1,2],
- qr/--[ \t]*(.+)/m ],
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir daemon', 'mksscan',
- '-s -q {}', [0], [1..7],
- qr/^... (\S+)/m ],
-
-# ### http://www.nod32.com/, version v2.52 (old)
-# ['ESET NOD32 for Linux Mail servers',
-# ['/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir --files -z --sfx --rtp --adware --unsafe --pattern --heur '.
-# '-w -a --action-on-infected=accept --action-on-uncleanable=accept '.
-# '--action-on-notscanned=accept {}',
-# [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version v2.7 (old)
-# ['ESET NOD32 Linux Mail Server - command line interface',
-# ['/usr/bin/nod32cli', '/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir {}', [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version 2.71.12
-# ['ESET Software ESETS Command Line Interface',
-# ['/usr/bin/esets_cli', 'esets_cli'],
-# '--subdir {}', [0], [1,2,3], qr/virus="([^"]+)"/m ],
-
- ### http://www.eset.com/, version 3.0
- ['ESET Software ESETS Command Line Interface',
- ['/usr/bin/esets_cli', 'esets_cli'],
- '--subdir {}', [0], [1,2,3],
- qr/:\s*action="(?!accepted)[^"]*"\n.*:\s*virus="([^"]*)"/m ],
-
- ## http://www.nod32.com/, NOD32LFS version 2.5 and above
- ['ESET NOD32 for Linux File servers',
- ['/opt/eset/nod32/sbin/nod32','nod32'],
- '--files -z --mail --sfx --rtp --adware --unsafe --pattern --heur '.
- '-w -a --action=1 -b {}',
- [0], [1,10], qr/^object=.*, virus="(.*?)",/m ],
-
-# Experimental, based on posting from Rado Dibarbora (Dibo) on 2002-05-31
-# ['ESET Software NOD32 Client/Server (NOD32SS)',
-# \&ask_daemon2, # greets with 200, persistent, terminate with QUIT
-# ["SCAN {}/*\r\n", '127.0.0.1:8448' ],
-# qr/^200 File OK/m, qr/^201 /m, qr/^201 (.+)/m ],
-
- ### http://www.norman.com/products_nvc.shtml
- ['Norman Virus Control v5 / Linux', 'nvcc',
- '-c -l:0 -s -u -temp:$TEMPBASE {}', [0,10,11], [1,2,14],
- qr/(?i).* virus in .* -> \'(.+)\'/m ],
-
- ### http://www.pandasoftware.com/
- ['Panda CommandLineSecure 9 for Linux',
- ['/opt/pavcl/usr/bin/pavcl','pavcl'],
- '-auto -aex -heu -cmp -nbr -nor -nos -eng -nob {}',
- qr/Number of files infected[ .]*: 0+(?!\d)/m,
- qr/Number of files infected[ .]*: 0*[1-9]/m,
- qr/Found virus :\s*(\S+)/m ],
- # NOTE: for efficiency, start the Panda in resident mode with 'pavcl -tsr'
- # before starting amavisd - the bases are then loaded only once at startup.
- # To reload bases in a signature update script:
- # /opt/pavcl/usr/bin/pavcl -tsr -ulr; /opt/pavcl/usr/bin/pavcl -tsr
- # Please review other options of pavcl, for example:
- # -nomalw, -nojoke, -nodial, -nohackt, -nospyw, -nocookies
-
-# ### http://www.pandasoftware.com/
-# ['Panda Antivirus for Linux', ['pavcl'],
-# '-TSR -aut -aex -heu -cmp -nbr -nor -nso -eng {}',
-# [0], [0x10, 0x30, 0x50, 0x70, 0x90, 0xB0, 0xD0, 0xF0],
-# qr/Found virus :\s*(\S+)/m ],
-
-# GeCAD AV technology is acquired by Microsoft; RAV has been discontinued.
-# Check your RAV license terms before fiddling with the following two lines!
-# ['GeCAD RAV AntiVirus 8', 'ravav',
-# '--all --archive --mail {}', [1], [2,3,4,5], qr/Infected: (.+)/m ],
-# # NOTE: the command line switches changed with scan engine 8.5 !
-# # (btw, assigning stdin to /dev/null causes RAV to fail)
-
- ### http://www.nai.com/
- ['NAI McAfee AntiVirus (uvscan)', 'uvscan',
- '--secure -rv --mime --summary --noboot --mailbox --program --timeout 180 - {}', [0], [13],
- qr/(?x) Found (?:
- \ the\ (.+)\ (?:virus|trojan) |
- \ (?:virus|trojan)\ or\ variant\ ([^ ]+) |
- :\ (.+)\ NOT\ a\ virus)/m,
- # sub {$ENV{LD_PRELOAD}='/lib/libc.so.6'},
- # sub {delete $ENV{LD_PRELOAD}},
- ],
- # NOTE1: with RH9: force the dynamic linker to look at /lib/libc.so.6 before
- # anything else by setting environment variable LD_PRELOAD=/lib/libc.so.6
- # and then clear it when finished to avoid confusing anything else.
- # NOTE2: to treat encrypted files as viruses replace the [13] with:
- # qr/^\s{5,}(Found|is password-protected|.*(virus|trojan))/
-
- ### http://www.virusbuster.hu/en/
- ['VirusBuster', ['vbuster', 'vbengcl'],
- "{} -ss -i '*' -log=$MYHOME/vbuster.log", [0], [1],
- qr/: '(.*)' - Virus/m ],
- # VirusBuster Ltd. does not support the daemon version for the workstation
- # engine (vbuster-eng-1.12-linux-i386-libc6.tgz) any longer. The names of
- # binaries, some parameters AND return codes have changed (from 3 to 1).
- # See also the new Vexira entry 'vascan' which is possibly related.
-
-# ### http://www.virusbuster.hu/en/
-# ['VirusBuster (Client + Daemon)', 'vbengd',
-# '-f -log scandir {}', [0], [3],
-# qr/Virus found = (.*);/m ],
-# # HINT: for an infected file it always returns 3,
-# # although the man-page tells a different story
-
- ### http://www.cyber.com/
- ['CyberSoft VFind', 'vfind',
- '--vexit {}/*', [0], [23], qr/##==>>>> VIRUS ID: CVDL (.+)/m,
- # sub {$ENV{VSTK_HOME}='/usr/lib/vstk'},
- ],
-
- ### http://www.avast.com/
- ['avast! Antivirus', ['/usr/bin/avastcmd','avastcmd'],
- '-a -i -n -t=A {}', [0], [1], qr/\binfected by:\s+([^ \t\n\[\]]+)/m ],
-
- ### http://www.ikarus-software.com/
- ['Ikarus AntiVirus for Linux', 'ikarus',
- '{}', [0], [40], qr/Signature (.+) found/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdscan', # new version
- '--action=ignore --no-list {}', qr/^Infected files *:0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/m,
- qr/(?:suspected|infected): (.*)(?:\033|$)/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdc', # old version
- '--arc --mail {}', qr/^Infected files *:0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/m,
- qr/(?:suspected|infected): (.*)(?:\033|$)/m ],
- # consider also: --all --nowarn --alev=15 --flev=15. The --all argument may
- # not apply to your version of bdc, check documentation and see 'bdc --help'
-
- ### ArcaVir for Linux and Unix http://www.arcabit.pl/
- ['ArcaVir for Linux', ['arcacmd','arcacmd.static'],
- '-v 1 -summary 0 -s {}', [0], [1,2],
- qr/(?:VIR|WIR):[ \t]*(.+)/m ],
-
-# ['File::Scan', sub {Amavis::AV::ask_av(sub{
-# use File::Scan; my($fn)=@@_;
-# my($f)=File::Scan->new(max_txt_size=>0, max_bin_size=>0);
-# my($vname) = $f->scan($fn);
-# $f->error ? (2,"Error: ".$f->error)
-# : ($vname ne '') ? (1,"$vname FOUND") : (0,"Clean")}, @@_) },
-# ["{}/*"], [0], [1], qr/^(.*) FOUND$/m ],
-
-# ### fully-fledged checker for JPEG marker segments of invalid length
-# ['check-jpeg',
-# sub { use JpegTester (); Amavis::AV::ask_av(\&JpegTester::test_jpeg, @@_) },
-# ["{}/*"], undef, [1], qr/^(bad jpeg: .*)$/m ],
-# # NOTE: place file JpegTester.pm somewhere where Perl can find it,
-# # for example in /usr/local/lib/perl5/site_perl
-
-# ### example: simpleminded checker for JPEG marker segments with
-# ### invalid length (only checks first 32k, which is not thorough enough)
-# ['check-jpeg-simple',
-# sub { Amavis::AV::ask_av(sub {
-# my($f)=@@_; local(*FF,$_,$1,$2); my(@@r)=(0,'not jpeg');
-# open(FF,$f) or die "jpeg: open err $f: $!";
-# binmode(FF) or die "jpeg: binmode err $f: $!";
-# defined read(FF,$_,32000) or die "jpeg: read err $f: $!";
-# close(FF) or die "jpeg: close err $f: $!";
-# if (/^\xff\xd8\xff/) {
-# @@r=(0,'jpeg ok');
-# while (!/\G(?:\xff\xd9|\z)/gc) { # EOI or eof
-# if (/\G\xff+(?=\xff|\z)/gc) {} # fill-bytes before marker
-# elsif (/\G\xff([\x01\xd0-\xd8])/gc) {} # TEM, RSTi, SOI
-# elsif (/\G\xff([^\x00\xff])(..)/gcs) { # marker segment start
-# my($n)=unpack("n",$2)-2;
-# $n=32766 if $n>32766; # Perl regexp limit
-# if ($n<0) {@@r=(1,"bad jpeg: len=$n, pos=".pos); last}
-# elsif (/\G.{$n}/gcs) {} # ok
-# elsif (/\G.{0,$n}\z/gcs) {last} # truncated
-# else {@@r=(1,"bad jpeg: unexpected, pos=".pos); last}
-# }
-# elsif (/\G[^\xff]+/gc) {} # ECS
-# elsif (/\G(?:\xff\x00)+/gc) {} # ECS
-# else {@@r=(2,"bad jpeg: unexpected char, pos=".pos); last}
-# }
-# }; @@r}, @@_) },
-# ["{}/*"], undef, [1], qr/^(bad jpeg: .*)$/m ],
-
-# ### an example/testing/template virus scanner (external), wastes 3 seconds
-# ['wasteful sleeper example',
-# '/bin/sleep', '3', # calls external program
-# undef, undef, qr/no such/m ],
-
-# ### an example/testing/template virus scanner (internal), does nothing
-# ['null',
-# sub {}, ["{}"], # supplies its own subroutine, no external program
-# undef, undef, qr/no such/m ],
-
-);
-
-
-# If no virus scanners from the @@av_scanners list produce 'clean' nor
-# 'infected' status (i.e. they all fail to run or the list is empty),
-# then _all_ scanners from the @@av_scanners_backup list are tried
-# (again, subject to $first_infected_stops_scan). When there are both
-# daemonized and equivalent or similar command-line scanners available,
-# it is customary to place slower command-line scanners in the
-# @@av_scanners_backup list. The default choice is somewhat arbitrary,
-# move entries from one list to another as desired, keeping main scanners
-# in the primary list to avoid warnings.
-
-@@av_scanners_backup = (
-
- ### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
- ['ClamAV-clamscan', 'clamscan',
- "--stdout --no-summary -r --tempdir=$TEMPBASE {}",
- [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon, V6
- ['F-PROT Antivirus for UNIX', ['fpscan'],
- '--report --mount --adware {}', # consider: --applications -s 4 -u 3 -z 10
- [0,8,64], [1,2,3, 4+1,4+2,4+3, 8+1,8+2,8+3, 12+1,12+2,12+3],
- qr/^\[Found\s+[^\]]*\]\s+<([^ \t(>]*)/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon (old)
- ['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
- '-dumb -ai -archive -packed -server {}', [0,8], [3,6], # or: [0], [3,6,8],
- qr/(?:Infection:|security risk named) (.+)|\s+contains\s+(.+)$/m ],
-
- ### http://www.trendmicro.com/ - backs up Trophie
- ['Trend Micro FileScanner', ['/etc/iscan/vscan','vscan'],
- '-za -a {}', [0], qr/Found virus/m, qr/Found virus (.+) in/m ],
-
- ### http://www.sald.com/, http://drweb.imshop.de/ - backs up DrWebD
- ['drweb - DrWeb Antivirus', # security LHA hole in Dr.Web 4.33 and earlier
- ['/usr/local/drweb/drweb', '/opt/drweb/drweb', 'drweb'],
- '-path={} -al -go -ot -cn -upn -ok-',
- [0,32], [1,9,33], qr' infected (?:with|by)(?: virus)? (.*)$'m ],
-
- ### http://www.kaspersky.com/
- ['Kaspersky Antivirus v5.5',
- ['/opt/kaspersky/kav4fs/bin/kav4fs-kavscanner',
- '/opt/kav/5.5/kav4unix/bin/kavscanner',
- '/opt/kav/5.5/kav4mailservers/bin/kavscanner', 'kavscanner'],
- '-i0 -xn -xp -mn -R -ePASBME {}/*', [0,10,15], [5,20,21,25],
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.*)/m,
-# sub {chdir('/opt/kav/bin') or die "Can't chdir to kav: $!"},
-# sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
-# Commented out because the name 'sweep' clashes with Debian and FreeBSD
-# package/port of an audio editor. Make sure the correct 'sweep' is found
-# in the path when enabling.
-#
-# ### http://www.sophos.com/ - backs up Sophie or SAVI-Perl
-# ['Sophos Anti Virus (sweep)', 'sweep',
-# '-nb -f -all -rec -ss -sc -archive -cab -mime -oe -tnef '.
-# '--no-reset-atime {}',
-# [0,2], qr/Virus .*? found/m,
-# qr/^>>> Virus(?: fragment)? '?(.*?)'? found/m,
-# ],
-# # other options to consider: -idedir=/usr/local/sav
-
-# Always succeeds and considers mail clean.
-# Potentially useful when all other scanners fail and it is desirable
-# to let mail continue to flow with no virus checking (when uncommented).
-# ['always-clean', sub {0}],
-
-);
-
-
-#
-# Section VIII - Debugging
-#
-
-# The most useful debugging tool is to run amavisd-new non-detached
-# from a terminal window using command: # amavisd debug
-
-# Some more refined approaches:
-
-# If sender matches ACL, turn debugging fully up, just for this one message
-#@@debug_sender_maps = ( ["test-sender\@@$mydomain"] );
-#@@debug_sender_maps = ( [qw( debug@@example.com debug@@example.net )] );
-
-# May be useful along with @@debug_sender_maps:
-# Prevent all decoded originals being deleted (replaced by decoded part)
-#@@keep_decoded_original_maps = (1);
-
-# Turn on SpamAssassin debugging (output to STDERR, use with 'amavisd debug')
-#$sa_debug = '1,all'; # defaults to false
-
-
-#
-# Section IX - Policy banks (dynamic policy switching)
-#
-
-## Define some policy banks (sets of settings) and give them
-## arbitrary names (the names '', 'MYNETS' and 'MYUSERS' have special meaning):
-#
-# $policy_bank{'ALT'} = {
-# log_level => 3,
-# syslog_ident => 'alt-amavis',
-# syslog_facility => 'LOCAL3',
-# inet_acl => [qw( 10.0.1.14 )],
-# final_spam_destiny => D_PASS, final_bad_header_destiny => D_PASS,
-# forward_method => 'smtp:*:*',
-# notify_method => 'smtp:[127.0.0.1]:10025',
-# virus_admin_maps => "abuse\@@$mydomain",
-# spam_lovers_maps => [@@spam_lovers_maps, [qw( abuse@@example.com )]],
-# spam_tag_level_maps => 2.1,
-# spam_tag2_level_maps => 6.32,
-# spam_kill_level_maps => 6.72,
-# spam_dsn_cutoff_level_maps => 8,
-# defang_spam => 1,
-# local_client_bind_address => '10.11.12.13',
-# localhost_name => 'amavis.example.com',
-# smtpd_greeting_banner =>
-# '${helo-name} ${protocol} ${product} ${version-id} (${version-date}) TEST service ready';
-# auth_mech_avail => [qw(PLAIN LOGIN)],
-# auth_required_inp => 1,
-# auth_required_out => 1,
-# amavis_auth_user => 'amavisd', amavis_auth_pass = 'tOpsecretX',
-# av_scanners => [ # provide only 'free' scanners
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/, qr/\bFOUND$/,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/,
-# ],
-# ],
-# av_scanners_backup => [
-# ['ClamAV-clamscan', 'clamscan',
-# "--stdout --disable-summary -r --tempdir=$TEMPBASE {}", [0], [1],
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/,
-# ],
-# ],
-# };
-
-# NOTE: the use of policy banks for changing protocol on the input socket is
-# only needed when different protocols need to be spoken on different sockets
-# at the same time. For normal use just set globally e.g.: $protocol='AM.PDP';
-#
-#$policy_bank{'AM.PDP-SOCK'} = {
-# protocol => 'AM.PDP', # Amavis policy delegation protocol
-# auth_required_release => 0, # do not require secret_id for amavisd-release
-#};
-#
-#$policy_bank{'AM.PDP-INET'} = {
-# protocol => 'AM.PDP', # Amavis policy delegation protocol
-# inet_acl => [qw( 127.0.0.1 [::1] )], # restrict to these IP addresses
-#};
-#
-## the name 'MYNETS' has special semantics: this policy bank gets loaded
-## whenever MTA supplies the original SMTP client IP address (Postfix XFORWARD
-## extension or a new AM.PDP protocol) and that address matches @@mynetworks.
-#
-# $terminate_dsn_on_notify_success = 1;
-# $policy_bank{'MYNETS'} = { # mail originating from @@mynetworks
-# originating => 1, # is true in MYNETS by deflt, but let's make it explicit
-# terminate_dsn_on_notify_success => 0,
-# spam_kill_level_maps => 6.9,
-# syslog_facility => 'LOCAL4', # tell syslog to log to a separate file
-# virus_admin_maps => ["virusalert\@@$mydomain"], # alert of internal viruses
-# spam_admin_maps => ["spamalert\@@$mydomain"], # alert of internal spam
-# bypass_spam_checks_maps => [1], # or: don't spam-check internal mail
-# bypass_banned_checks_maps => [1], # don't banned-check internal mail
-# warnbadhsender => 1, # warn local senders about their broken MUA
-# banned_filename_maps => ['MYNETS-DEFAULT'], # more permissive banning rules
-# spam_quarantine_cutoff_level_maps => undef, # quarantine all local spam
-# spam_dsn_cutoff_level_maps => undef, # ensure NDN regardless of spam level
-# spam_dsn_cutoff_level_bysender_maps => # but only from local domain senders
-# [ { lc(".$mydomain") => undef, '.' => 15 } ],
-# };
-
-## the name 'MYUSERS' has special semantics: this policy bank gets loaded
-## whenever the sender matches @@local_domains_maps. This only makes sense
-## if local sender addresses can be trusted -- for example by requiring
-## authentication before letting users send with their local address.
-#
-# $policy_bank{'MYUSERS'} = {
-# final_virus_destiny => D_BOUNCE, # bounce only to authenticated local users
-# final_banned_destiny=> D_BOUNCE,
-# };
-
-# Needed for Courier: speak courier protocol on the socket
-#$interface_policy{'SOCK'} = 'AM-SOCK';
-#$policy_bank{'AM-SOCK'} = {protocol => 'COURIER'};
-
-## Now we can assign policy banks to amavisd tcp port numbers listed in
-## $inet_socket_port. Whenever the connection from MTA is received, first
-## a built-in policy bank $policy_bank{''} gets loaded, which bringings-in
-## all the global/legacy settings, then it gets overlaid by the bank
-## named in the $interface_policy{$port} if any, and finally the bank
-## 'MYNETS' is overlaid if it exists and the SMTP client IP address
-## is known (by XFORWARD command from MTA) and it matches @@mynetworks.
-
-# $interface_policy{'10026'} = 'ALT';
-
-# used by amavisd-release utility of a new AM.PDP-based amavis-milter client
-#$interface_policy{'9998'} = 'AM.PDP-INET';
-#$interface_policy{'SOCK'} = 'AM.PDP-SOCK';
-
-# invoke custom hooks or additional configuration files:
-# include_config_files('/etc/amavisd-custom.conf');
-
-# Want to execute additional configuration files from some directory?
-#{ my($d) = '/etc/amavis/conf.d'; # do *.cf or *.conf files in this directory
-# local(*D); opendir(D,$d) or die "Can't open dir $d: $!";
-# my(@@d) = sort grep {/\.(cf|conf)$/ && -f} map {/^(.*)$/,"$d/$1"} readdir(D);
-# closedir(D) or die "Can't close $d: $!";
-# include_config_files($_) for (@@d);
-#}
-
-1; # insure a defined return value
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d74 1
-d162 3
-d318 1
-a318 1
-$syslog_priority = 'debug'; # Syslog base (minimal) priority as a string,
-d331 1
-a331 1
-$log_level = 2; # (defaults to 0), -d
-d515 4
-a518 4
-#$final_virus_destiny = D_DISCARD; # (defaults to D_DISCARD)
-#$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
-#$final_spam_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
-#$final_bad_header_destiny = D_PASS; # (defaults to D_PASS)
-d921 1
-a921 1
- qr'^MAIL$', # retain full original message for virus checking (can be slow)
-d1464 3
-d1503 2
-d1959 10
-a1968 10
-# ### http://www.clamav.net/
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# # NOTE: run clamd under the same user as amavisd, or run it under its own
-# # uid such as clamav, add user clamav to the amavis group, and then add
-# # AllowSupplementaryGroups to clamd.conf;
-# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# # this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@a73 1
-$myhostname = 'helga.brehm-online.com';
-a160 3
-@@auth_mech_avail = qw(PLAIN LOGIN);
-$auth_required_inp = 0;
-$auth_required_out = 0;
-d314 1
-a314 1
-$syslog_priority = 'info'; # Syslog base (minimal) priority as a string,
-d327 1
-a327 1
-$log_level = 3; # (defaults to 0), -d
-d511 4
-a514 4
-$final_virus_destiny = D_REJECT; # (defaults to D_DISCARD)
-$final_banned_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_spam_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_bad_header_destiny = D_PASS; # (defaults to D_PASS)
-d917 1
-a917 1
-# qr'^MAIL$', # retain full original message for virus checking (can be slow)
-a1459 3
- [ qr'@@strato(?:-rz)\.de$'i => -5.0 ],
- [ qr'^Doris\.Hennig@@BA-MH\.Verwalt-Berlin\.de$'i => -5.0 ],
- [ qr'^doris@@hennig-berlin\.org$'i => -5.0 ],
-a1495 2
- 'niels@@google.com' => -3.0,
- 'kameu@@gmx.de' => -3.0,
-d1950 10
-a1959 10
-### http://www.clamav.net/
-['ClamAV-clamd',
- \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
- qr/\bOK$/m, qr/\bFOUND$/m,
- qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# NOTE: run clamd under the same user as amavisd, or run it under its own
-# uid such as clamav, add user clamav to the amavis group, and then add
-# AllowSupplementaryGroups to clamd.conf;
-# NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d74 1
-d162 3
-d318 1
-a318 1
-$syslog_priority = 'debug'; # Syslog base (minimal) priority as a string,
-d331 1
-a331 1
-$log_level = 2; # (defaults to 0), -d
-d515 4
-a518 4
-#$final_virus_destiny = D_DISCARD; # (defaults to D_DISCARD)
-#$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
-#$final_spam_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
-#$final_bad_header_destiny = D_PASS; # (defaults to D_PASS)
-d921 1
-a921 1
- qr'^MAIL$', # retain full original message for virus checking (can be slow)
-d1464 3
-d1503 2
-d1959 10
-a1968 10
-# ### http://www.clamav.net/
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# # NOTE: run clamd under the same user as amavisd, or run it under its own
-# # uid such as clamav, add user clamav to the amavis group, and then add
-# # AllowSupplementaryGroups to clamd.conf;
-# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# # this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.09.08.21.17.36; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@use strict;
-
-# a minimalistic configuration file for amavisd-new with all necessary settings
-#
-# see amavisd.conf-default for a list of all variables with their defaults;
-# for more details see documentation in INSTALL, README_FILES/*
-# and at http://www.ijs.si/software/amavisd/amavisd-new-docs.html
-
-
-# COMMONLY ADJUSTED SETTINGS:
-
-# @@bypass_virus_checks_maps = (1); # controls running of anti-virus code
-# @@bypass_spam_checks_maps = (1); # controls running of anti-spam code
-# $bypass_decode_parts = 1; # controls running of decoders&dearchivers
-
-$max_servers = 2; # num of pre-forked children (2..30 is common), -m
-$daemon_user = 'amavis'; # (no default; customary: vscan or amavis), -u
-$daemon_group = 'amavis'; # (no default; customary: vscan or amavis), -g
-
-$mydomain = 'example.com'; # a convenient default for other settings
-
-# $MYHOME = '/var/amavis'; # a convenient default for other settings, -H
-$TEMPBASE = "$MYHOME/tmp"; # working directory, needs to exist, -T
-$ENV{TMPDIR} = $TEMPBASE; # environment variable TMPDIR, used by SA, etc.
-$QUARANTINEDIR = "$MYHOME/quarantine"; # -Q
-# $quarantine_subdir_levels = 1; # add level of subdirs to disperse quarantine
-# $release_format = 'resend'; # 'attach', 'plain', 'resend'
-# $report_format = 'arf'; # 'attach', 'plain', 'resend', 'arf'
-
-# $daemon_chroot_dir = $MYHOME; # chroot directory or undef, -R
-
-# $db_home = "$MYHOME/db"; # dir for bdb nanny/cache/snmp databases, -D
-# $helpers_home = "$MYHOME/var"; # working directory for SpamAssassin, -S
-# $lock_file = "$MYHOME/var/amavisd.lock"; # -L
-# $pid_file = "$MYHOME/var/amavisd.pid"; # -P
-#NOTE: create directories $MYHOME/tmp, $MYHOME/var, $MYHOME/db manually
-
-$log_level = 0; # verbosity 0..5, -d
-$log_recip_templ = undef; # disable by-recipient level-0 log entries
-$do_syslog = 1; # log via syslogd (preferred)
-$syslog_facility = 'mail'; # Syslog facility as a string
- # e.g.: mail, daemon, user, local0, ... local7
-
-$enable_db = 1; # enable use of BerkeleyDB/libdb (SNMP and nanny)
-$nanny_details_level = 2; # nanny verbosity: 1: traditional, 2: detailed
-$enable_dkim_verification = 0; # enable DKIM signatures verification
-$enable_dkim_signing = 0; # load DKIM signing code, keys defined by dkim_key
-
-@@local_domains_maps = ( [".$mydomain"] ); # list of all local domains
-
-@@mynetworks = qw( 127.0.0.0/8 [::1] [FE80::]/10 [FEC0::]/10
- 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 );
-
-$unix_socketname = "$MYHOME/amavisd.sock"; # amavisd-release or amavis-milter
- # option(s) -p overrides $inet_socket_port and $unix_socketname
-
-$inet_socket_port = 10024; # listen on this local TCP port(s)
-# $inet_socket_port = [10024,10026]; # listen on multiple TCP ports
-
-$policy_bank{'MYNETS'} = { # mail originating from @@mynetworks
- originating => 1, # is true in MYNETS by default, but let's make it explicit
- os_fingerprint_method => undef, # don't query p0f for internal clients
-};
-
-# it is up to MTA to re-route mail from authenticated roaming users or
-# from internal hosts to a dedicated TCP port (such as 10026) for filtering
-$interface_policy{'10026'} = 'ORIGINATING';
-
-$policy_bank{'ORIGINATING'} = { # mail supposedly originating from our users
- originating => 1, # declare that mail was submitted by our smtp client
- allow_disclaimers => 1, # enables disclaimer insertion if available
- # notify administrator of locally originating malware
- virus_admin_maps => ["virusalert\@@$mydomain"],
- spam_admin_maps => ["virusalert\@@$mydomain"],
- warnbadhsender => 1,
- # forward to a smtpd service providing DKIM signing service
- forward_method => 'smtp:[127.0.0.1]:10027',
- # force MTA conversion to 7-bit (e.g. before DKIM signing)
- smtpd_discard_ehlo_keywords => ['8BITMIME'],
- bypass_banned_checks_maps => [1], # allow sending any file names and types
- terminate_dsn_on_notify_success => 0, # don't remove NOTIFY=SUCCESS option
-};
-
-$interface_policy{'SOCK'} = 'AM.PDP-SOCK'; # only applies with $unix_socketname
-
-# Use with amavis-release over a socket or with Petr Rehor's amavis-milter.c
-# (with amavis-milter.c from this package or old amavis.c client use 'AM.CL'):
-$policy_bank{'AM.PDP-SOCK'} = {
- protocol => 'AM.PDP',
- auth_required_release => 0, # do not require secret_id for amavisd-release
-};
-
-$sa_tag_level_deflt = 2.0; # add spam info headers if at, or above that level
-$sa_tag2_level_deflt = 6.2; # add 'spam detected' headers at that level
-$sa_kill_level_deflt = 6.9; # triggers spam evasive actions (e.g. blocks mail)
-$sa_dsn_cutoff_level = 10; # spam level beyond which a DSN is not sent
-$sa_crediblefrom_dsn_cutoff_level = 18; # likewise, but for a likely valid From
-# $sa_quarantine_cutoff_level = 25; # spam level beyond which quarantine is off
-$penpals_bonus_score = 8; # (no effect without a @@storage_sql_dsn database)
-$penpals_threshold_high = $sa_kill_level_deflt; # don't waste time on hi spam
-$bounce_killer_score = 100; # spam score points to add for joe-jobbed bounces
-
-$sa_mail_body_size_limit = 400*1024; # don't waste time on SA if mail is larger
-$sa_local_tests_only = 0; # only tests which do not require internet access?
-
-# @@lookup_sql_dsn =
-# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
-# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'],
-# ["DBI:SQLite:dbname=$MYHOME/sql/mail_prefs.sqlite", '', ''] );
-# @@storage_sql_dsn = @@lookup_sql_dsn; # none, same, or separate database
-
-# $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
-# defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
-
-$virus_admin = "virusalert\@@$mydomain"; # notifications recip.
-
-$mailfrom_notify_admin = "virusalert\@@$mydomain"; # notifications sender
-$mailfrom_notify_recip = "virusalert\@@$mydomain"; # notifications sender
-$mailfrom_notify_spamadmin = "spam.police\@@$mydomain"; # notifications sender
-$mailfrom_to_quarantine = ''; # null return path; uses original sender if undef
-
-@@addr_extension_virus_maps = ('virus');
-@@addr_extension_banned_maps = ('banned');
-@@addr_extension_spam_maps = ('spam');
-@@addr_extension_bad_header_maps = ('badh');
-# $recipient_delimiter = '+'; # undef disables address extensions altogether
-# when enabling addr extensions do also Postfix/main.cf: recipient_delimiter=+
-
-$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
-# $dspam = 'dspam';
-
-$MAXLEVELS = 14;
-$MAXFILES = 1500;
-$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
-$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
-
-$sa_spam_subject_tag = '***Spam*** ';
-$defang_virus = 1; # MIME-wrap passed infected mail
-$defang_banned = 1; # MIME-wrap passed mail containing banned name
-# for defanging bad headers only turn on certain minor contents categories:
-$defang_by_ccat{CC_BADH.",3"} = 1; # NUL or CR character in header
-$defang_by_ccat{CC_BADH.",5"} = 1; # header line longer than 998 characters
-$defang_by_ccat{CC_BADH.",6"} = 1; # header field syntax error
-
-
-# OTHER MORE COMMON SETTINGS (defaults may suffice):
-
-# $myhostname = 'host.example.com'; # must be a fully-qualified domain name!
-
-# $notify_method = 'smtp:[127.0.0.1]:10025';
-# $forward_method = 'smtp:[127.0.0.1]:10025'; # set to undef with milter!
-
-# $final_virus_destiny = D_DISCARD;
-# $final_banned_destiny = D_DISCARD;
-# $final_spam_destiny = D_PASS; #!!! D_DISCARD / D_REJECT
-# $final_bad_header_destiny = D_PASS;
-# $bad_header_quarantine_method = undef;
-
-# $os_fingerprint_method = 'p0f:*:2345'; # to query p0f-analyzer.pl
-
-## hierarchy by which a final setting is chosen:
-## policy bank (based on port or IP address) -> *_by_ccat
-## *_by_ccat (based on mail contents) -> *_maps
-## *_maps (based on recipient address) -> final configuration value
-
-
-# SOME OTHER VARIABLES WORTH CONSIDERING (see amavisd.conf-default for all)
-
-# $warnbadhsender,
-# $warnvirusrecip, $warnbannedrecip, $warnbadhrecip, (or @@warn*recip_maps)
-#
-# @@bypass_virus_checks_maps, @@bypass_spam_checks_maps,
-# @@bypass_banned_checks_maps, @@bypass_header_checks_maps,
-#
-# @@virus_lovers_maps, @@spam_lovers_maps,
-# @@banned_files_lovers_maps, @@bad_header_lovers_maps,
-#
-# @@blacklist_sender_maps, @@score_sender_maps,
-#
-# $clean_quarantine_method, $virus_quarantine_to, $banned_quarantine_to,
-# $bad_header_quarantine_to, $spam_quarantine_to,
-#
-# $defang_bad_header, $defang_undecipherable, $defang_spam
-
-
-# REMAINING IMPORTANT VARIABLES ARE LISTED HERE BECAUSE OF LONGER ASSIGNMENTS
-
-@@keep_decoded_original_maps = (new_RE(
- qr'^MAIL$', # retain full original message for virus checking
- qr'^MAIL-UNDECIPHERABLE$', # recheck full mail if it contains undecipherables
- qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
-# qr'^Zip archive data', # don't trust Archive::Zip
-));
-
-
-$banned_filename_re = new_RE(
-
-### BLOCKED ANYWHERE
-# qr'^UNDECIPHERABLE$', # is or contains any undecipherable components
- qr'^\.(exe-ms|dll)$', # banned file(1) types, rudimentary
-# qr'^\.(exe|lha|cab|dll)$', # banned file(1) types
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
-# [ qr'^\.(gz|bz2)$' => 0 ], # allow any in gzip or bzip2
- [ qr'^\.(rpm|cpio|tar)$' => 0 ], # allow any in Unix-type archives
-
- qr'.\.(pif|scr)$'i, # banned extensions - rudimentary
-# qr'^\.zip$', # block zip type
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN ARCHIVES:
-# [ qr'^\.(zip|rar|arc|arj|zoo)$'=> 0 ], # allow any within these archives
-
- qr'^application/x-msdownload$'i, # block these MIME types
- qr'^application/x-msdos-program$'i,
- qr'^application/hta$'i,
-
-# qr'^message/partial$'i, # rfc2046 MIME type
-# qr'^message/external-body$'i, # rfc2046 MIME type
-
-# qr'^(application/x-msmetafile|image/x-wmf)$'i, # Windows Metafile MIME type
-# qr'^\.wmf$', # Windows Metafile file(1) type
-
- # block certain double extensions in filenames
- qr'^(?!cid:).*\.[^./]*[A-Za-z][^./]*\.\s*(exe|vbs|pif|scr|bat|cmd|com|cpl|dll)[.\s]*$'i,
-
-# qr'\{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?'i, # Class ID CLSID, strict
-# qr'\{[0-9a-z]{4,}(-[0-9a-z]{4,}){0,7}\}?'i, # Class ID extension CLSID, loose
-
- qr'.\.(exe|vbs|pif|scr|cpl)$'i, # banned extension - basic
-# qr'.\.(exe|vbs|pif|scr|cpl|bat|cmd|com)$'i, # banned extension - basic+cmd
-# qr'.\.(ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ini|ins|isp|js|jse|lib|lnk|mda|mdb|mde|mdt|mdw|mdz|msc|msi|
-# msp|mst|ocx|ops|pcd|pif|prg|reg|scr|sct|shb|shs|sys|vb|vbe|vbs|vxd|
-# wmf|wsc|wsf|wsh)$'ix, # banned extensions - long
-# qr'.\.(asd|asf|asx|url|vcs|wmd|wmz)$'i, # consider also
-# qr'.\.(ani|cur|ico)$'i, # banned cursors and icons filename
-# qr'^\.ani$', # banned animated cursor file(1) type
-# qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
-);
-# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
-# and http://www.cknow.com/vtutor/vtextensions.htm
-
-
-# ENVELOPE SENDER SOFT-WHITELISTING / SOFT-BLACKLISTING
-
-@@score_sender_maps = ({ # a by-recipient hash lookup table,
- # results from all matching recipient tables are summed
-
-# ## per-recipient personal tables (NOTE: positive: black, negative: white)
-# 'user1@@example.com' => [{'bla-mobile.press@@example.com' => 10.0}],
-# 'user3@@example.com' => [{'.ebay.com' => -3.0}],
-# 'user4@@example.com' => [{'cleargreen@@cleargreen.com' => -7.0,
-# '.cleargreen.com' => -5.0}],
-
- ## site-wide opinions about senders (the '.' matches any recipient)
- '.' => [ # the _first_ matching sender determines the score boost
-
- new_RE( # regexp-type lookup table, just happens to be all soft-blacklist
- [qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou)@@'i => 5.0],
- [qr'^(greatcasino|investments|lose_weight_today|market\.alert)@@'i=> 5.0],
- [qr'^(money2you|MyGreenCard|new\.tld\.registry|opt-out|opt-in)@@'i=> 5.0],
- [qr'^(optin|saveonlsmoking2002k|specialoffer|specialoffers)@@'i => 5.0],
- [qr'^(stockalert|stopsnoring|wantsome|workathome|yesitsfree)@@'i => 5.0],
- [qr'^(your_friend|greatoffers)@@'i => 5.0],
- [qr'^(inkjetplanet|marketopt|MakeMoney)\d*@@'i => 5.0],
- ),
-
-# read_hash("/var/amavis/sender_scores_sitewide"),
-
- { # a hash-type lookup table (associative array)
- 'nobody@@cert.org' => -3.0,
- 'cert-advisory@@us-cert.gov' => -3.0,
- 'owner-alert@@iss.net' => -3.0,
- 'slashdot@@slashdot.org' => -3.0,
- 'securityfocus.com' => -3.0,
- 'ntbugtraq@@listserv.ntbugtraq.com' => -3.0,
- 'security-alerts@@linuxsecurity.com' => -3.0,
- 'mailman-announce-admin@@python.org' => -3.0,
- 'amavis-user-admin@@lists.sourceforge.net'=> -3.0,
- 'amavis-user-bounces@@lists.sourceforge.net' => -3.0,
- 'spamassassin.apache.org' => -3.0,
- 'notification-return@@lists.sophos.com' => -3.0,
- 'owner-postfix-users@@postfix.org' => -3.0,
- 'owner-postfix-announce@@postfix.org' => -3.0,
- 'owner-sendmail-announce@@lists.sendmail.org' => -3.0,
- 'sendmail-announce-request@@lists.sendmail.org' => -3.0,
- 'donotreply@@sendmail.org' => -3.0,
- 'ca+envelope@@sendmail.org' => -3.0,
- 'noreply@@freshmeat.net' => -3.0,
- 'owner-technews@@postel.acm.org' => -3.0,
- 'ietf-123-owner@@loki.ietf.org' => -3.0,
- 'cvs-commits-list-admin@@gnome.org' => -3.0,
- 'rt-users-admin@@lists.fsck.com' => -3.0,
- 'clp-request@@comp.nus.edu.sg' => -3.0,
- 'surveys-errors@@lists.nua.ie' => -3.0,
- 'emailnews@@genomeweb.com' => -5.0,
- 'yahoo-dev-null@@yahoo-inc.com' => -3.0,
- 'returns.groups.yahoo.com' => -3.0,
- 'clusternews@@linuxnetworx.com' => -3.0,
- lc('lvs-users-admin@@LinuxVirtualServer.org') => -3.0,
- lc('owner-textbreakingnews@@CNNIMAIL12.CNN.COM') => -5.0,
-
- # soft-blacklisting (positive score)
- 'sender@@example.net' => 3.0,
- '.example.net' => 1.0,
-
- },
- ], # end of site-wide tables
-});
-
-
-@@decoders = (
- ['mail', \&do_mime_decode],
-# ['asc', \&do_ascii],
-# ['uue', \&do_ascii],
-# ['hqx', \&do_ascii],
-# ['ync', \&do_ascii],
- ['F', \&do_uncompress, ['unfreeze','freeze -d','melt','fcat'] ],
- ['Z', \&do_uncompress, ['uncompress','gzip -d','zcat'] ],
- ['gz', \&do_uncompress, 'gzip -d'],
- ['gz', \&do_gunzip],
- ['bz2', \&do_uncompress, 'bzip2 -d'],
- ['xz', \&Amavis::Unpackers::do_uncompress,
- ['xzdec'. 'xz -dc', 'unxz -c', 'xzcat'] ],
- ['lzma', \&Amavis::Unpackers::do_uncompress,
- ['lzmadec', 'xz -dc --format=lzma',
- 'lzma -dc', 'unlzma -c', 'lzcat', 'lzmadec'] ],
- ['lzo', \&do_uncompress, 'lzop -d'],
- ['rpm', \&do_uncompress, ['rpm2cpio.pl','rpm2cpio'] ],
- ['cpio', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['tar', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['deb', \&do_ar, 'ar'],
-# ['a', \&do_ar, 'ar'], # unpacking .a seems an overkill
- ['zip', \&do_unzip],
- ['7z', \&do_7zip, ['7zr','7za','7z'] ],
- ['rar', \&do_unrar, ['rar','unrar'] ],
- ['arj', \&do_unarj, ['arj','unarj'] ],
- ['arc', \&do_arc, ['nomarch','arc'] ],
- ['zoo', \&do_zoo, ['zoo','unzoo'] ],
- ['lha', \&do_lha, 'lha'],
-# ['doc', \&do_ole, 'ripole'],
- ['cab', \&do_cabextract, 'cabextract'],
- ['tnef', \&do_tnef_ext, 'tnef'],
- ['tnef', \&do_tnef],
-# ['sit', \&do_unstuff, 'unstuff'], # broken/unsafe decoder
- ['exe', \&do_executable, ['rar','unrar'], 'lha', ['arj','unarj'] ],
-);
-
-
-@@av_scanners = (
-
-# ### http://www.sophos.com/
-# ['Sophos-SSSP',
-# \&ask_daemon, ["{}", 'sssp:/var/run/savdi/sssp.sock'],
-# # or: ["{}", 'sssp:[127.0.0.1]:4010'],
-# qr/^DONE OK\b/m, qr/^VIRUS\b/m, qr/^VIRUS\s*(\S*)/m ],
-
-# ### http://www.clanfield.info/sophie/ (http://www.vanja.com/tools/sophie/)
-# ['Sophie',
-# \&ask_daemon, ["{}/\n", 'sophie:/var/run/sophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
-# ['Sophos SAVI', \&ask_daemon, ['{}','savi-perl:'] ],
-
-# ['Avira SAVAPI',
-# \&ask_daemon, ["*", 'savapi:/var/tmp/.savapi3', 'product-id'],
-# qr/^(200|210)/m, qr/^(310|420|319)/m,
-# qr/^(?:310|420)[,\s]*(?:.* <<< )?(.+?)(?: ; |$)/m
-# settings for the SAVAPI3.conf: ArchiveScan=1, HeurLevel=2, MailboxScan=1
-
-# ### http://www.clamav.net/
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# # NOTE: run clamd under the same user as amavisd, or run it under its own
-# # uid such as clamav, add user clamav to the amavis group, and then add
-# # AllowSupplementaryGroups to clamd.conf;
-# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# # this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-
-# ### http://www.clamav.net/ and CPAN (memory-hungry! clamd is preferred)
-# # note that Mail::ClamAV requires perl to be build with threading!
-# ['Mail::ClamAV', \&ask_daemon, ['{}','clamav-perl:'],
-# [0], [1], qr/^INFECTED: (.+)/m],
-
-# ### http://www.openantivirus.org/
-# ['OpenAntiVirus ScannerDaemon (OAV)',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
-# qr/^OK/m, qr/^FOUND: /m, qr/^FOUND: (.+)/m ],
-
-# ### http://www.vanja.com/tools/trophie/
-# ['Trophie',
-# \&ask_daemon, ["{}/\n", 'trophie:/var/run/trophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.grisoft.com/
-# ['AVG Anti-Virus',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:55555'],
-# qr/^200/m, qr/^403/m, qr/^403 .*?: ([^\r\n]+)/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot fpscand', # F-PROT Antivirus for BSD/Linux/Solaris, version 6
-# \&ask_daemon,
-# ["SCAN FILE {}/*\n", '127.0.0.1:10200'],
-# qr/^(0|8|64) /m,
-# qr/^([1235679]|1[01345]) |<[^>:]*(?i)(infected|suspicious|unwanted)/m,
-# qr/(?i)<[^>:]*(?:infected|suspicious|unwanted)[^>:]*: ([^>]*)>/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot f-protd', # old version
-# \&ask_daemon,
-# ["GET {}/*?-dumb%20-archive%20-packed HTTP/1.0\r\n\r\n",
-# ['127.0.0.1:10200', '127.0.0.1:10201', '127.0.0.1:10202',
-# '127.0.0.1:10203', '127.0.0.1:10204'] ],
-# qr/(?i)<summary[^>]*>clean<\/summary>/m,
-# qr/(?i)<summary[^>]*>infected<\/summary>/m,
-# qr/(?i)<name>(.+)<\/name>/m ],
-
-# ### http://www.sald.com/, http://www.dials.ru/english/, http://www.drweb.ru/
-# ['DrWebD', \&ask_daemon, # DrWebD 4.31 or later
-# [pack('N',1). # DRWEBD_SCAN_CMD
-# pack('N',0x00280001). # DONT_CHANGEMAIL, IS_MAIL, RETURN_VIRUSES
-# pack('N', # path length
-# length("$TEMPBASE/amavis-yyyymmddTHHMMSS-xxxxx/parts/pxxx")).
-# '{}/*'. # path
-# pack('N',0). # content size
-# pack('N',0),
-# '/var/drweb/run/drwebd.sock',
-# # '/var/amavis/var/run/drwebd.sock', # suitable for chroot
-# # '/usr/local/drweb/run/drwebd.sock', # FreeBSD drweb ports default
-# # '127.0.0.1:3000', # or over an inet socket
-# ],
-# qr/\A\x00[\x10\x11][\x00\x10]\x00/sm, # IS_CLEAN,EVAL_KEY; SKIPPED
-# qr/\A\x00[\x00\x01][\x00\x10][\x20\x40\x80]/sm,# KNOWN_V,UNKNOWN_V,V._MODIF
-# qr/\A.{12}(?:infected with )?([^\x00]+)\x00/sm,
-# ],
-# # NOTE: If using amavis-milter, change length to:
-# # length("$TEMPBASE/amavis-milter-xxxxxxxxxxxxxx/parts/pxxx").
-
- ### http://www.kaspersky.com/ (kav4mailservers)
- ['KasperskyLab AVP - aveclient',
- ['/usr/local/kav/bin/aveclient','/usr/local/share/kav/bin/aveclient',
- '/opt/kav/5.5/kav4mailservers/bin/aveclient','aveclient'],
- '-p /var/run/aveserver -s {}/*',
- [0,3,6,8], qr/\b(INFECTED|SUSPICION|SUSPICIOUS)\b/m,
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.+)/m,
- ],
- # NOTE: one may prefer [0],[2,3,4,5], depending on how suspicious,
- # currupted or protected archives are to be handled
-
- ### http://www.kaspersky.com/
- ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp'],
- '-* -P -B -Y -O- {}', [0,3,6,8], [2,4], # any use for -A -K ?
- qr/infected: (.+)/m,
- sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
- sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
- ### The kavdaemon and AVPDaemonClient have been removed from Kasperky
- ### products and replaced by aveserver and aveclient
- ['KasperskyLab AVPDaemonClient',
- [ '/opt/AVP/kavdaemon', 'kavdaemon',
- '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
- '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
- '/opt/AVP/avpdc', 'avpdc' ],
- "-f=$TEMPBASE {}", [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/m ],
- # change the startup-script in /etc/init.d/kavd to:
- # DPARMS="-* -Y -dl -f=/var/amavis /var/amavis"
- # (or perhaps: DPARMS="-I0 -Y -* /var/amavis" )
- # adjusting /var/amavis above to match your $TEMPBASE.
- # The '-f=/var/amavis' is needed if not running it as root, so it
- # can find, read, and write its pid file, etc., see 'man kavdaemon'.
- # defUnix.prf: there must be an entry "*/var/amavis" (or whatever
- # directory $TEMPBASE specifies) in the 'Names=' section.
- # cd /opt/AVP/DaemonClients; configure; cd Sample; make
- # cp AvpDaemonClient /opt/AVP/
- # su - amavis -c "${PREFIX}/kavdaemon ${DPARMS}"
-
- ### http://www.centralcommand.com/
- ['CentralCommand Vexira (new) vascan',
- ['vascan','/usr/lib/Vexira/vascan'],
- "-a s --timeout=60 --temp=$TEMPBASE -y $QUARANTINEDIR ".
- "--log=/var/log/vascan.log {}",
- [0,3], [1,2,5],
- qr/(?x)^\s* (?:virus|iworm|macro|mutant|sequence|trojan)\ found:\ ( [^\]\s']+ )\ \.\.\.\ /m ],
- # Adjust the path of the binary and the virus database as needed.
- # 'vascan' does not allow to have the temp directory to be the same as
- # the quarantine directory, and the quarantine option can not be disabled.
- # If $QUARANTINEDIR is not used, then another directory must be specified
- # to appease 'vascan'. Move status 3 to the second list if password
- # protected files are to be considered infected.
-
- ### http://www.avira.com/
- ### old Avira AntiVir 2.x (ex H+BEDV) or old CentralCommand Vexira Antivirus
- ['Avira AntiVir', ['antivir','vexira'],
- '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/m,
- qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
- (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/m ],
- # NOTE: if you only have a demo version, remove -z and add 214, as in:
- # '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,
-
- ### http://www.avira.com/
- ### Avira for UNIX 3.x
- ['Avira AntiVir', ['avscan'],
- '-s --batch --alert-action=none {}', [0,4], qr/(?:ALERT|FUND):/m,
- qr/(?:ALERT|FUND): (?:.* <<< )?(.+?)(?: ; |$)/m ],
-
- ### http://www.commandsoftware.com/
- ['Command AntiVirus for Linux', 'csav',
- '-all -archive -packed {}', [50], [51,52,53],
- qr/Infection: (.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec CarrierScan via Symantec CommandLineScanner',
- 'cscmdline', '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
- qr/^Files Infected:\s+0$/m, qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec AntiVirus Scan Engine',
- 'savsecls', '-server 127.0.0.1:7777 -mode scanrepair -details -verbose {}',
- [0], qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
- # NOTE: check options and patterns to see which entry better applies
-
-# ### http://www.f-secure.com/products/anti-virus/ version 4.65
-# ['F-Secure Antivirus for Linux servers',
-# ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
-# '--delete=no --disinf=no --rename=no --archive=yes --auto=yes '.
-# '--dumb=yes --list=no --mime=yes {}', [0], [3,6,8],
-# qr/(?:infection|Infected|Suspected): (.+)/m ],
-
- ### http://www.f-secure.com/products/anti-virus/ version 5.52
- ['F-Secure Antivirus for Linux servers',
- ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
- '--virus-action1=report --archive=yes --auto=yes '.
- '--dumb=yes --list=no --mime=yes {}', [0], [3,4,6,8],
- qr/(?:infection|Infected|Suspected|Riskware): (.+)/m ],
- # NOTE: internal archive handling may be switched off by '--archive=no'
- # to prevent fsav from exiting with status 9 on broken archives
-
-# ### http://www.avast.com/
-# ['avast! Antivirus daemon',
-# \&ask_daemon, # greets with 220, terminate with QUIT
-# ["SCAN {}\015\012QUIT\015\012", '/var/run/avast4/mailscanner.sock'],
-# qr/\t\[\+\]/m, qr/\t\[L\]\t/m, qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
-# ### http://www.avast.com/
-# ['avast! Antivirus - Client/Server Version', 'avastlite',
-# '-a /var/run/avast4/mailscanner.sock -n {}', [0], [1],
-# qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
- ['CAI InoculateIT', 'inocucmd', # retired product
- '-sec -nex {}', [0], [100],
- qr/was infected by virus (.+)/m ],
- # see: http://www.flatmtn.com/computer/Linux-Antivirus_CAI.html
-
- ### http://www3.ca.com/Solutions/Product.asp?ID=156 (ex InoculateIT)
- ['CAI eTrust Antivirus', 'etrust-wrapper',
- '-arc -nex -spm h {}', [0], [101],
- qr/is infected by virus: (.+)/m ],
- # NOTE: requires suid wrapper around inocmd32; consider flag: -mod reviewer
- # see http://marc.theaimsgroup.com/?l=amavis-user&m=109229779912783
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir for Linux (beta)', ['mks32','mks'],
- '-s {}/*', [0], [1,2],
- qr/--[ \t]*(.+)/m ],
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir daemon', 'mksscan',
- '-s -q {}', [0], [1..7],
- qr/^... (\S+)/m ],
-
-# ### http://www.nod32.com/, version v2.52 (old)
-# ['ESET NOD32 for Linux Mail servers',
-# ['/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir --files -z --sfx --rtp --adware --unsafe --pattern --heur '.
-# '-w -a --action-on-infected=accept --action-on-uncleanable=accept '.
-# '--action-on-notscanned=accept {}',
-# [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version v2.7 (old)
-# ['ESET NOD32 Linux Mail Server - command line interface',
-# ['/usr/bin/nod32cli', '/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir {}', [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version 2.71.12
-# ['ESET Software ESETS Command Line Interface',
-# ['/usr/bin/esets_cli', 'esets_cli'],
-# '--subdir {}', [0], [1,2,3], qr/virus="([^"]+)"/m ],
-
- ### http://www.eset.com/, version 3.0
- ['ESET Software ESETS Command Line Interface',
- ['/usr/bin/esets_cli', 'esets_cli'],
- '--subdir {}', [0], [1,2,3],
- qr/:\s*action="(?!accepted)[^"]*"\n.*:\s*virus="([^"]*)"/m ],
-
- ## http://www.nod32.com/, NOD32LFS version 2.5 and above
- ['ESET NOD32 for Linux File servers',
- ['/opt/eset/nod32/sbin/nod32','nod32'],
- '--files -z --mail --sfx --rtp --adware --unsafe --pattern --heur '.
- '-w -a --action=1 -b {}',
- [0], [1,10], qr/^object=.*, virus="(.*?)",/m ],
-
-# Experimental, based on posting from Rado Dibarbora (Dibo) on 2002-05-31
-# ['ESET Software NOD32 Client/Server (NOD32SS)',
-# \&ask_daemon2, # greets with 200, persistent, terminate with QUIT
-# ["SCAN {}/*\r\n", '127.0.0.1:8448' ],
-# qr/^200 File OK/m, qr/^201 /m, qr/^201 (.+)/m ],
-
- ### http://www.norman.com/products_nvc.shtml
- ['Norman Virus Control v5 / Linux', 'nvcc',
- '-c -l:0 -s -u -temp:$TEMPBASE {}', [0,10,11], [1,2,14],
- qr/(?i).* virus in .* -> \'(.+)\'/m ],
-
- ### http://www.pandasoftware.com/
- ['Panda CommandLineSecure 9 for Linux',
- ['/opt/pavcl/usr/bin/pavcl','pavcl'],
- '-auto -aex -heu -cmp -nbr -nor -nos -eng -nob {}',
- qr/Number of files infected[ .]*: 0+(?!\d)/m,
- qr/Number of files infected[ .]*: 0*[1-9]/m,
- qr/Found virus :\s*(\S+)/m ],
- # NOTE: for efficiency, start the Panda in resident mode with 'pavcl -tsr'
- # before starting amavisd - the bases are then loaded only once at startup.
- # To reload bases in a signature update script:
- # /opt/pavcl/usr/bin/pavcl -tsr -ulr; /opt/pavcl/usr/bin/pavcl -tsr
- # Please review other options of pavcl, for example:
- # -nomalw, -nojoke, -nodial, -nohackt, -nospyw, -nocookies
-
-# ### http://www.pandasoftware.com/
-# ['Panda Antivirus for Linux', ['pavcl'],
-# '-TSR -aut -aex -heu -cmp -nbr -nor -nso -eng {}',
-# [0], [0x10, 0x30, 0x50, 0x70, 0x90, 0xB0, 0xD0, 0xF0],
-# qr/Found virus :\s*(\S+)/m ],
-
-# GeCAD AV technology is acquired by Microsoft; RAV has been discontinued.
-# Check your RAV license terms before fiddling with the following two lines!
-# ['GeCAD RAV AntiVirus 8', 'ravav',
-# '--all --archive --mail {}', [1], [2,3,4,5], qr/Infected: (.+)/m ],
-# # NOTE: the command line switches changed with scan engine 8.5 !
-# # (btw, assigning stdin to /dev/null causes RAV to fail)
-
- ### http://www.nai.com/
- ['NAI McAfee AntiVirus (uvscan)', 'uvscan',
- '--secure -rv --mime --summary --noboot - {}', [0], [13],
- qr/(?x) Found (?:
- \ the\ (.+)\ (?:virus|trojan) |
- \ (?:virus|trojan)\ or\ variant\ ([^ ]+) |
- :\ (.+)\ NOT\ a\ virus)/m,
- # sub {$ENV{LD_PRELOAD}='/lib/libc.so.6'},
- # sub {delete $ENV{LD_PRELOAD}},
- ],
- # NOTE1: with RH9: force the dynamic linker to look at /lib/libc.so.6 before
- # anything else by setting environment variable LD_PRELOAD=/lib/libc.so.6
- # and then clear it when finished to avoid confusing anything else.
- # NOTE2: to treat encrypted files as viruses replace the [13] with:
- # qr/^\s{5,}(Found|is password-protected|.*(virus|trojan))/
-
- ### http://www.virusbuster.hu/en/
- ['VirusBuster', ['vbuster', 'vbengcl'],
- "{} -ss -i '*' -log=$MYHOME/vbuster.log", [0], [1],
- qr/: '(.*)' - Virus/m ],
- # VirusBuster Ltd. does not support the daemon version for the workstation
- # engine (vbuster-eng-1.12-linux-i386-libc6.tgz) any longer. The names of
- # binaries, some parameters AND return codes have changed (from 3 to 1).
- # See also the new Vexira entry 'vascan' which is possibly related.
-
-# ### http://www.virusbuster.hu/en/
-# ['VirusBuster (Client + Daemon)', 'vbengd',
-# '-f -log scandir {}', [0], [3],
-# qr/Virus found = (.*);/m ],
-# # HINT: for an infected file it always returns 3,
-# # although the man-page tells a different story
-
- ### http://www.cyber.com/
- ['CyberSoft VFind', 'vfind',
- '--vexit {}/*', [0], [23], qr/##==>>>> VIRUS ID: CVDL (.+)/m,
- # sub {$ENV{VSTK_HOME}='/usr/lib/vstk'},
- ],
-
- ### http://www.avast.com/
- ['avast! Antivirus', ['/usr/bin/avastcmd','avastcmd'],
- '-a -i -n -t=A {}', [0], [1], qr/\binfected by:\s+([^ \t\n\[\]]+)/m ],
-
- ### http://www.ikarus-software.com/
- ['Ikarus AntiVirus for Linux', 'ikarus',
- '{}', [0], [40], qr/Signature (.+) found/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdscan', # new version
- '--action=ignore --no-list {}', qr/^Infected files\s*:\s*0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files)\s*:\s*0*[1-9]/m,
- qr/(?:suspected|infected)\s*:\s*(.*)(?:\033|$)/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdc', # old version
- '--arc --mail {}', qr/^Infected files *:0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/m,
- qr/(?:suspected|infected): (.*)(?:\033|$)/m ],
- # consider also: --all --nowarn --alev=15 --flev=15. The --all argument may
- # not apply to your version of bdc, check documentation and see 'bdc --help'
-
- ### ArcaVir for Linux and Unix http://www.arcabit.pl/
- ['ArcaVir for Linux', ['arcacmd','arcacmd.static'],
- '-v 1 -summary 0 -s {}', [0], [1,2],
- qr/(?:VIR|WIR):[ \t]*(.+)/m ],
-
-# ### a generic SMTP-client interface to a SMTP-based virus scanner
-# ['av_smtp', \&ask_av_smtp,
-# ['{}', 'smtp:[127.0.0.1]:5525', 'dummy@@localhost'],
-# qr/^2/, qr/^5/, qr/^\s*(.*?)\s*$/m ],
-
-# ['File::Scan', sub {Amavis::AV::ask_av(sub{
-# use File::Scan; my($fn)=@@_;
-# my($f)=File::Scan->new(max_txt_size=>0, max_bin_size=>0);
-# my($vname) = $f->scan($fn);
-# $f->error ? (2,"Error: ".$f->error)
-# : ($vname ne '') ? (1,"$vname FOUND") : (0,"Clean")}, @@_) },
-# ["{}/*"], [0], [1], qr/^(.*) FOUND$/m ],
-
-# ### fully-fledged checker for JPEG marker segments of invalid length
-# ['check-jpeg',
-# sub { use JpegTester (); Amavis::AV::ask_av(\&JpegTester::test_jpeg, @@_) },
-# ["{}/*"], undef, [1], qr/^(bad jpeg: .*)$/m ],
-# # NOTE: place file JpegTester.pm somewhere where Perl can find it,
-# # for example in /usr/local/lib/perl5/site_perl
-
-);
-
-
-@@av_scanners_backup = (
-
- ### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
- ['ClamAV-clamscan', 'clamscan',
- "--stdout --no-summary -r --tempdir=$TEMPBASE {}",
- [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
-# ### http://www.clamav.net/ - using remote clamd scanner as a backup
-# ['ClamAV-clamdscan', 'clamdscan',
-# "--stdout --no-summary --config-file=/etc/clamd-client.conf {}",
-# [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
-# ['ClamAV-clamd-stream',
-# \&ask_daemon, ["*", 'clamd:/var/run/clamav/clamd'],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon, V6
- ['F-PROT Antivirus for UNIX', ['fpscan'],
- '--report --mount --adware {}', # consider: --applications -s 4 -u 3 -z 10
- [0,8,64], [1,2,3, 4+1,4+2,4+3, 8+1,8+2,8+3, 12+1,12+2,12+3],
- qr/^\[Found\s+[^\]]*\]\s+<([^ \t(>]*)/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon (old)
- ['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
- '-dumb -archive -packed {}', [0,8], [3,6], # or: [0], [3,6,8],
- qr/(?:Infection:|security risk named) (.+)|\s+contains\s+(.+)$/m ],
-
- ### http://www.trendmicro.com/ - backs up Trophie
- ['Trend Micro FileScanner', ['/etc/iscan/vscan','vscan'],
- '-za -a {}', [0], qr/Found virus/m, qr/Found virus (.+) in/m ],
-
- ### http://www.sald.com/, http://drweb.imshop.de/ - backs up DrWebD
- ['drweb - DrWeb Antivirus', # security LHA hole in Dr.Web 4.33 and earlier
- ['/usr/local/drweb/drweb', '/opt/drweb/drweb', 'drweb'],
- '-path={} -al -go -ot -cn -upn -ok-',
- [0,32], [1,9,33], qr' infected (?:with|by)(?: virus)? (.*)$'m ],
-
- ### http://www.kaspersky.com/
- ['Kaspersky Antivirus v5.5',
- ['/opt/kaspersky/kav4fs/bin/kav4fs-kavscanner',
- '/opt/kav/5.5/kav4unix/bin/kavscanner',
- '/opt/kav/5.5/kav4mailservers/bin/kavscanner', 'kavscanner'],
- '-i0 -xn -xp -mn -R -ePASBME {}/*', [0,10,15], [5,20,21,25],
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.*)/m,
-# sub {chdir('/opt/kav/bin') or die "Can't chdir to kav: $!"},
-# sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
-# Commented out because the name 'sweep' clashes with Debian and FreeBSD
-# package/port of an audio editor. Make sure the correct 'sweep' is found
-# in the path when enabling.
-#
-# ### http://www.sophos.com/ - backs up Sophie or SAVI-Perl
-# ['Sophos Anti Virus (sweep)', 'sweep',
-# '-nb -f -all -rec -ss -sc -archive -cab -mime -oe -tnef '.
-# '--no-reset-atime {}',
-# [0,2], qr/Virus .*? found/m,
-# qr/^>>> Virus(?: fragment)? '?(.*?)'? found/m,
-# ],
-# # other options to consider: -idedir=/usr/local/sav
-
-# Always succeeds and considers mail clean.
-# Potentially useful when all other scanners fail and it is desirable
-# to let mail continue to flow with no virus checking (when uncommented).
-# ['always-clean', sub {0}],
-
-);
-
-
-1; # insure a defined return value
-@
+++ /dev/null
-head 1.3;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.3
-date 2010.12.01.22.28.49; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.12.01.22.03.57; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.21.14.09; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@root::0:root,frank
-bin::1:root,bin,daemon
-daemon::2:root,bin,daemon
-sys::3:root,bin,adm
-adm::4:root,adm,daemon
-tty::5:frank,taurec
-disk::6:root,adm
-lp::7:lp,frank,taurec
-mem::8:
-kmem::9:
-wheel::10:root,frank,taurec,morph
-floppy::11:root
-mail::12:mail,postfix
-news::13:news
-uucp::14:uucp
-man::15:man
-cron:x:16:frank,taurec,morph,patrick,vivi
-console::17:frank,taurec
-audio::18:frank,taurec
-cdrom::19:
-dialout::20:root
-ftp:x:21:
-sshd:x:22:
-at:x:25:
-tape::26:root
-video::27:root,frank,taurec
-games:x:35:
-named:x:40:
-mysql:x:60:
-cdrw::80:
-apache:x:81:
-usb::85:
-users::100:games,taurec
-postgrey:x:101:
-polw:x:102:
-teamspeak3:x:103:
-nagios:x:104:frank
-wireshark:x:105:
-lpadmin:x:106:
-messagebus:x:110:
-rpc:x:111:
-locate:x:122:frank,taurec,morph,patrick,vivi
-ntp:x:123:
-tcpdump:x:196:
-ulogd:x:197:
-crontab:x:198:
-ssmtp:x:199:
-nofiles:x:200:
-postfix:x:207:
-postdrop:x:208:
-smmsp:x:209:smmsp
-portage::250:portage,frank,taurec
-utmp:x:406:
-ldap:x:439:
-clamav:x:998:
-amavis:x:999:
-proftpd:x:1008:
-vmail:x:1023:
-nogroup::65533:
-nobody::65534:
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d6 1
-a6 1
-tty::5:frank
-d8 1
-a8 1
-lp::7:lp,frank
-d11 1
-a11 1
-wheel::10:root,frank
-d17 3
-a19 3
-cron:x:16:frank
-console::17:frank
-audio::18:frank
-d26 2
-a27 1
-video::27:root,frank
-d33 1
-a33 1
-users::100:games
-d37 1
-a37 1
-nagios:x:104:
-d42 1
-a42 1
-locate:x:122:frank
-d52 1
-a52 1
-portage::250:portage,frank
-d58 1
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d56 1
-@
+++ /dev/null
-head 1.12;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.12
-date 2011.12.08.21.02.30; author root; state Exp;
-branches;
-next 1.11;
-
-1.11
-date 2011.07.10.23.54.02; author root; state Exp;
-branches;
-next 1.10;
-
-1.10
-date 2011.04.05.12.56.57; author root; state Exp;
-branches;
-next 1.9;
-
-1.9
-date 2010.12.02.13.04.30; author root; state Exp;
-branches;
-next 1.8;
-
-1.8
-date 2010.11.30.16.23.24; author root; state Exp;
-branches;
-next 1.7;
-
-1.7
-date 2010.11.29.23.28.22; author root; state Exp;
-branches;
-next 1.6;
-
-1.6
-date 2010.11.18.09.24.05; author root; state Exp;
-branches;
-next 1.5;
-
-1.5
-date 2010.07.13.20.45.29; author root; state Exp;
-branches;
-next 1.4;
-
-1.4
-date 2010.06.29.09.00.42; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2010.06.23.11.39.20; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.06.08.12.01.00; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.29.20.34.38; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.12
-log
-@Checked in.
-@
-text
-@# These settings were set by the catalyst build script that automatically
-# built this stage.
-# Please consult /usr/share/portage/config/make.conf.example for a more
-# detailed example.
-
-CFLAGS="-O2 -pipe -march=opteron"
-CXXFLAGS="${CFLAGS}"
-
-# WARNING: Changing your CHOST is not something that should be done lightly.
-# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
-CHOST="x86_64-pc-linux-gnu"
-
-# These are the USE flags that were used in addition to what is provided by the
-# profile used for building.
-USE="3dnow X acl apache2 audit bash-completion bazaar bzip2 caps cgi cvs curl \
- darcs djvu doc examples expat fam fastcgi fontconfig ftp gd gif git gmp \
- gnutls gpg graphviz gs gsl gtk guile hscolour html icu idn imagemagick imap ipv6 ithreads \
- jadetex java javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua \
- lzma lzo maildir mailwrapper mercurial mmx mmxext modperl motif mp3 mysql \
- nis odbc ogg openldap pam pch pcre pdf perl pic png php python rar samba sasl \
- session smtp snmp soap spamassassin spell sqlite sqlite3 sse sse2 ssh \
- subversion svg syslog theora tiff tk truetype unicode vhosts vim-syntax \
- vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
-
-I_KNOW_WHAT_I_AM_DOING=yes
-
-ACCEPT_LICENSE="DOOM3 PUEL RTCW RTCW-ETEULA"
-
-APACHE2_MODULES="actions alias asis auth_basic auth_digest authn_alias
- authn_anon authn_dbd authn_dbm authn_default authn_file
- authz_dbm authz_default authz_groupfile authz_host
- authz_owner authz_user autoindex cache cern_meta cgi cgid
- charset_lite dav dav_fs dav_lock dbd deflate dir disk_cache
- dumpio env expires ext_filter file_cache filter headers icu
- ident imagemap include info log_config log_forensic logio
- mem_cache mime mime_magic negotiation proxy proxy_ajp
- proxy_balancer proxy_connect proxy_ftp proxy_http proxy_scgi
- reqtimeout rewrite setenvif speling status substitute
- unique_id userdir usertrack version vhost_alias "
-
-#APACHE2_MPMS="-event% -itk% -peruser% -prefork% -worker%"
-APACHE2_MPMS="prefork"
-
-VIDEO_CARDS="intel mach64 r128 radeon savage via svga"
-
-CONFIG_PROTECT="/var/www/ldap/htdocs/config \
- /var/www/ldap/htdocs/templates \
- /var/www/bautagebuch/htdocs/wp-config.php \
- /var/www/myadmin/htdocs/config.inc.php \
- /var/www/webmail/htdocs/horde/config \
- "
-CONFIG_PROTECT_MASK="/etc/init.d"
-
-PORTAGE_NICENESS=3
-
-AUTOCLEAN="yes"
-
-PORTDIR_OVERLAY="/usr/local/portage"
-
-#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp -P \${DISTDIR} \${URI}"
-#FETCHCOMMAND="mv -v \${DISTDIR}/.old/\${FILE} \${DISTDIR}/"
-
-FEATURES="parallel-fetch"
-#MAKEOPTS="-j3"
-EMERGE_DEFAULT_OPTS="--with-bdeps y "
-
-LINGUAS="de de_AT de_BE de_CH de_DE de_LU en en_AG en_AU en_BW en_CA en_DK en_GB en_HK en_IE en_IN en_NG en_NZ en_PH en_SG en_ZA en_ZW en_US ru_RU ru_UA"
-
-#GENTOO_MIRRORS="ftp://mirror.netcologne.de/gentoo/ ftp://mirror.muntinternet.net/pub/gentoo/ http://mirror.muntinternet.net/pub/gentoo/ http://gentoo.supp.name/"
-GENTOO_MIRRORS="http://mirror.opteamax.de/gentoo/ http://gentoo.mneisen.org/ http://gentoo.mirror.dkm.cz/pub/gentoo/ http://de-mirror.org/gentoo/ http://gentoo.wheel.sk/"
-
-#PORT_LOGDIR="/var/log/portage"
-source /var/lib/layman/make.conf
-
-@
-
-
-1.11
-log
-@Checked in.
-@
-text
-@d17 1
-a17 1
- gnutls gpg graphviz gs gsl gtk guile html icu idn imagemagick imap ipv6 ithreads \
-d21 1
-a21 1
- session smtp snmp soap spamassassin spell sqlite sqlite3 sse sse2 \
-d69 2
-a70 1
-GENTOO_MIRRORS="ftp://mirror.netcologne.de/gentoo/ ftp://mirror.muntinternet.net/pub/gentoo/ http://mirror.muntinternet.net/pub/gentoo/ http://gentoo.supp.name/"
-@
-
-
-1.10
-log
-@Checked in.
-@
-text
-@d17 1
-a17 1
- gnutls gpg gs gsl gtk guile html icu idn imagemagick imap ipv6 ithreads \
-d20 1
-a20 1
- nis odbc ogg pam pch pcre pdf perl pic png php python rar samba sasl \
-@
-
-
-1.9
-log
-@Checked in.
-@
-text
-@d17 7
-a23 6
- gnutls gpg gs gsl gtk guile html icu idn imagemagick imap ipv6 ithreads jadetex java \
- javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua lzma lzo maildir \
- mailwrapper mercurial mmx mmxext modperl motif mp3 mysql nis odbc ogg pam \
- pch pcre pdf perl pic png php python rar samba sasl session smtp snmp soap spamassassin \
- spell sqlite sqlite3 sse sse2 subversion svg syslog theora tiff tk truetype \
- unicode vhosts vim-syntax vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
-d29 11
-a39 9
-APACHE2_MODULES="actions alias asis auth_basic auth_digest authn_alias authn_anon authn_dbd
- authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile
- authz_host authz_owner authz_user autoindex cache cgi cgid charset_lite dav
- dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache
- filter headers icu ident imagemap include info log_config log_forensic logio
- mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer
- proxy_connect proxy_ftp proxy_http rewrite setenvif speling status
- substitute unique_id userdir usertrack vhost_alias "
-# -cern_meta -dumpio -version
-@
-
-
-1.8
-log
-@Checked in.
-@
-text
-@d20 1
-a20 1
- pch pcre pdf perl php pic png python rar samba sasl session smtp snmp soap spamassassin \
-a23 3
-USE="3dnow X acl audit bash-completion bazaar bzip2 caps \
- idn mmx mysql perl python sqlite sqlite3 sse sse2 vim-syntax xattr zlib"
-
-@
-
-
-1.7
-log
-@Checked in.
-@
-text
-@d15 11
-a25 1
-USE="idn mmx perl python sse sse2"
-@
-
-
-1.6
-log
-@Checked in.
-@
-text
-@d15 1
-a15 8
-USE="3dnow X acl apache2 audit bash-completion bazaar bzip2 caps cgi cvs curl \
- darcs djvu doc examples expat fam fastcgi fontconfig ftp gd gif git gmp \
- gnutls gpg gs gsl gtk guile html icu idn imagemagick imap ipv6 ithreads jadetex java \
- javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua lzma lzo maildir \
- mailwrapper mercurial mmx mmxext modperl motif mp3 mysql nis odbc ogg pam \
- pch pcre pdf perl php pic png python rar samba sasl session smtp snmp soap spamassassin \
- spell sqlite sqlite3 sse sse2 subversion svg syslog theora tiff tk truetype \
- unicode vhosts vim-syntax vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
-d61 1
-a61 1
-PORT_LOGDIR="/var/log/portage"
-d63 1
-@
-
-
-1.5
-log
-@Checked in.
-@
-text
-@d20 1
-a20 1
- pch pcre pdf php pic png python rar samba sasl session smtp snmp soap spamassassin \
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@d30 2
-a31 2
- authz_host authz_owner authz_user autoindex cache charset_lite dav dav_fs
- dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache
-d57 2
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d17 1
-a17 1
- gnutls gpg gs gsl gtk guile html icu idn imap ipv6 ithreads jadetex java \
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d15 6
-a20 5
-USE="3dnow X acl apache2 audit bash-completion bzip2 caps cgi curl djvu doc examples expat fam \
- fastcgi fontconfig ftp gd gif git gmp gnutls gpg gs gsl gtk guile html icu idn \
- imap ipv6 ithreads jadetex java javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua \
- lzma lzo maildir mailwrapper mmx mmxext modperl motif mp3 mysql nis odbc ogg pam \
- pch pcre pdf php pic png python samba sasl session smtp snmp soap spamassassin \
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d18 1
-a18 1
- lzo maildir mailwrapper mmx mmxext modperl motif mp3 mysql nis odbc ogg pam \
-@
+++ /dev/null
-head 1.29;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.29
-date 2010.04.12.08.42.16; author root; state Exp;
-branches;
-next 1.28;
-
-1.28
-date 2010.03.03.09.40.27; author root; state Exp;
-branches;
-next 1.27;
-
-1.27
-date 2010.02.04.18.02.12; author root; state Exp;
-branches;
-next 1.26;
-
-1.26
-date 2009.11.06.15.40.51; author root; state Exp;
-branches;
-next 1.25;
-
-1.25
-date 2009.10.27.10.36.10; author root; state Exp;
-branches;
-next 1.24;
-
-1.24
-date 2009.09.15.09.50.26; author root; state Exp;
-branches;
-next 1.23;
-
-1.23
-date 2009.07.13.08.48.31; author root; state Exp;
-branches;
-next 1.22;
-
-1.22
-date 2009.07.13.08.21.47; author root; state Exp;
-branches;
-next 1.21;
-
-1.21
-date 2009.06.15.09.46.43; author root; state Exp;
-branches;
-next 1.20;
-
-1.20
-date 2009.05.20.14.56.48; author root; state Exp;
-branches;
-next 1.19;
-
-1.19
-date 2009.03.30.21.09.00; author root; state Exp;
-branches;
-next 1.18;
-
-1.18
-date 2009.03.16.15.52.36; author root; state Exp;
-branches;
-next 1.17;
-
-1.17
-date 2009.02.09.09.54.34; author root; state Exp;
-branches;
-next 1.16;
-
-1.16
-date 2008.12.15.09.47.19; author root; state Exp;
-branches;
-next 1.15;
-
-1.15
-date 2008.12.08.09.26.17; author root; state Exp;
-branches;
-next 1.14;
-
-1.14
-date 2008.10.06.10.16.34; author root; state Exp;
-branches;
-next 1.13;
-
-1.13
-date 2008.08.14.19.55.22; author root; state Exp;
-branches;
-next 1.12;
-
-1.12
-date 2008.08.04.07.27.22; author root; state Exp;
-branches;
-next 1.11;
-
-1.11
-date 2008.07.10.09.16.43; author root; state Exp;
-branches;
-next 1.10;
-
-1.10
-date 2008.06.10.14.50.28; author root; state Exp;
-branches;
-next 1.9;
-
-1.9
-date 2008.06.10.13.42.07; author root; state Exp;
-branches;
-next 1.8;
-
-1.8
-date 2008.03.12.17.05.09; author root; state Exp;
-branches;
-next 1.7;
-
-1.7
-date 2008.02.11.08.51.40; author root; state Exp;
-branches;
-next 1.6;
-
-1.6
-date 2008.02.04.09.59.35; author root; state Exp;
-branches;
-next 1.5;
-
-1.5
-date 2008.01.09.10.00.27; author root; state Exp;
-branches;
-next 1.4;
-
-1.4
-date 2007.12.17.08.57.22; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2007.11.19.10.32.09; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2007.10.18.09.26.58; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2007.08.07.10.41.04; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.29
-log
-@Checked in.
-@
-text
-@# These settings were set by the catalyst build script that automatically built this stage
-# Please consult /etc/make.conf.example for a more detailed example
-
-#
-# $Header: /etc/make.conf,v 1.28 2010/03/03 09:40:27 root Exp $
-#
-
-CFLAGS="-O2 -march=i686 -pipe -march=athlon"
-CHOST="i686-pc-linux-gnu"
-CXXFLAGS="${CFLAGS}"
-
-I_KNOW_WHAT_I_AM_DOING=yes
-
-ACCEPT_LICENSE="DOOM3 PUEL RTCW RTCW-ETEULA"
-
-SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
-
-USE="3dnow X acl apache2 audit bash-completion bzip2 caps cgi curl djvu doc examples expat fam
- fastcgi fontconfig ftp gd gif git gmp gnome-keyring gnutls gpg gs gsl gtk guile hal html icu idn
- imap ipv6 ithreads jadetex java javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua
- lzo maildir mailwrapper mbox mmx mmxext modperl motif mp3 mysql nis nptl odbc ogg pam
- pch pcre pdf php pic png pop python ruby samba sasl session slp smtp snmp soap spamassassin
- spell sqlite sqlite3 sse subversion svg syslog tcl theora threads tiff tk truetype
- unicode usb vhosts vim-syntax vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
-# ithreads
-
-APACHE2_MODULES="actions alias asis auth_basic auth_digest authn_alias authn_anon authn_dbd
- authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile
- authz_host authz_owner authz_user autoindex cache charset_lite dav dav_fs
- dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache
- filter headers icu ident imagemap include info log_config log_forensic logio
- mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer
- proxy_connect proxy_ftp proxy_http rewrite setenvif speling status
- substitute unique_id userdir usertrack vhost_alias "
-# -cern_meta -dumpio -version
-
-#APACHE2_MPMS="-event% -itk% -peruser% -prefork% -worker%"
-APACHE2_MPMS="prefork"
-
-VIDEO_CARDS="intel mach64 r128 radeon savage via svga"
-
-CONFIG_PROTECT="/var/www/ldap/htdocs/config /var/www/ldap/htdocs/templates"
-CONFIG_PROTECT_MASK="/etc/init.d"
-
-PORTAGE_NICENESS=3
-
-PORT_LOGDIR="/var/log/portage"
-
-AUTOCLEAN="yes"
-PORTAGE_ELOG_CLASSES="info warn error log"
-PORTAGE_ELOG_SYSTEM="save mail"
-PORTAGE_ELOG_MAILURI="frank@@brehm-online.com localhost"
-PORTAGE_ELOG_MAILFROM="portage@@brehm-online.com"
-
-PORTDIR_OVERLAY="/usr/local/portage"
-FEATURES="parallel-fetch"
-#MAKEOPTS="-j3"
-EMERGE_DEFAULT_OPTS="--with-bdeps y "
-
-LINGUAS="de en en_GB en_US"
-
-#FETCHCOMMAND="mv -v \${DISTDIR}/.old/\${FILE} \${DISTDIR}/"
-
-# GENTOO_MIRRORS="ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ http://ftp.lug.ro/gentoo/ http://ftp.du.se/pub/os/gentoo"
-#GENTOO_MIRRORS="http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/"
-GENTOO_MIRRORS="ftp://mirror.netcologne.de/gentoo/ ftp://mirror.muntinternet.net/pub/gentoo/ http://mirror.muntinternet.net/pub/gentoo/ http://gentoo.supp.name/"
-
-source /var/lib/layman/make.conf
-
-@
-
-
-1.28
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: /etc/make.conf,v 1.27 2010/02/04 18:02:12 root Exp $
-d40 2
-@
-
-
-1.27
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: /etc/make.conf,v 1.26 2009/11/06 15:40:51 root Exp $
-d66 1
-a66 1
-source /usr/portage/local/layman/make.conf
-@
-
-
-1.26
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: /etc/make.conf,v 1.25 2009/10/27 10:36:10 root Exp $
-d8 1
-a8 1
-CFLAGS="-O3 -march=i686 -pipe -march=athlon"
-d25 1
-@
-
-
-1.25
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: /etc/make.conf,v 1.24 2009/09/15 09:50:26 root Exp $
-d19 1
-a19 1
- fastcgi fontconfig ftp gd gif git gmp gnome-keyring gnutls gpg gs gsl gtk guile hal html idn
-d23 1
-a23 1
- spell sqlite sqlite3 sse subversion svg tcl theora threads tiff tk truetype
-@
-
-
-1.24
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: /etc/make.conf,v 1.23 2009/07/13 08:48:31 root Exp $
-d14 2
-@
-
-
-1.23
-log
-@Checked in.
-@
-text
-@d5 1
-a5 1
-# $Header: $
-d18 1
-a18 1
- imap ipv6 ithreads jadetex java javascript jbig jpeg jpeg2k kerberos ldap libwww lua
-@
-
-
-1.22
-log
-@Checked in.
-@
-text
-@d4 4
-@
-
-
-1.21
-log
-@Checked in.
-@
-text
-@d13 2
-a14 2
- fastcgi fontconfig ftp gd gif git gmp gnome-keyring gnutls gpg gs gsl gtk guile hal html idn imap
- ipv6 ithreads jadetex java javascript jbig jpeg jpeg2k kerberos ldap libwww lua
-@
-
-
-1.20
-log
-@Checked in.
-@
-text
-@d13 1
-a13 1
- fastcgi fontconfig ftp gd gif git gmp gnutls gpg gs gsl gtk guile hal html idn imap
-@
-
-
-1.19
-log
-@Checked in.
-@
-text
-@d13 1
-a13 1
- fastcgi fontconfig ftp gd gif git gmp gnutls gpg gs gsl gtk guile hal html idn
-d16 1
-a16 1
- pch pcre pdf php pic png python ruby samba sasl session slp snmp soap spamassassin
-@
-
-
-1.18
-log
-@Checked in.
-@
-text
-@d56 2
-a57 1
-GENTOO_MIRRORS="http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/"
-@
-
-
-1.17
-log
-@Checked in.
-@
-text
-@d17 1
-a17 1
- spell sqlite sqlite3 sse sse2 subversion svg tcl theora threads tiff tk truetype
-@
-
-
-1.16
-log
-@Checked in.
-@
-text
-@d12 1
-a12 1
-USE="X acl apache2 bash-completion bzip2 caps cgi curl djvu doc examples expat fam
-d15 1
-a15 1
- lzo maildir mailwrapper mbox mmx mmxext modperl motif mp3 mysql nis nptl odbc pam
-@
-
-
-1.15
-log
-@Checked in.
-@
-text
-@d15 1
-a15 1
- lzo maildir mailwrapper mbox mmx modperl motif mysql nis nptl odbc pam
-d17 2
-a18 2
- spell sqlite sqlite3 sse sse2 subversion svg tcl threads tiff tk truetype
- unicode usb vhosts vim-syntax wmf xattr xml xmlrpc xpm xsl zlib"
-d28 1
-a28 1
-# -cern_meta -dumpio -version
-@
-
-
-1.14
-log
-@Checked in.
-@
-text
-@d16 1
-a16 1
- pch pcre pdf php pic png python ruby samba sasl session slp snmp soap
-@
-
-
-1.13
-log
-@Checked in.
-@
-text
-@d14 1
-a14 1
- ipv6 ithreads java javascript jbig jpeg jpeg2k kerberos ldap libwww lua
-@
-
-
-1.12
-log
-@Checked in.
-@
-text
-@d12 2
-a13 2
-USE="X acl apache2 bash-completion bzip2 caps curl djvu doc examples expat fam
- fastcgi fontconfig ftp gd gif gmp gnutls gs gsl gtk guile hal html idn
-d17 2
-a18 2
- spell sqlite sqlite3 sse sse2 svg tcl threads tiff tk truetype unicode
- usb vhosts vim-syntax wmf xattr xml xmlrpc xpm xsl zlib"
-@
-
-
-1.11
-log
-@Checked in.
-@
-text
-@d12 7
-a18 7
-USE="X acl apache2 bash-completion bzip2 caps curl djvu doc examples expat fam fastcgi fontconfig ftp
- gd gif gmp gnutls gs gsl gtk guile hal html idn ipv6 ithreads java javascript jbig jpeg jpeg2k
- kerberos ldap libwww lzo lua maildir mailwrapper mbox mmx modperl motif mysql nis
- nptl odbc pam pch pcre pdf php pic
- png python ruby samba sasl session slp snmp soap sqlite sqlite3 spell sse sse2 svg tcl
- threads tk tiff truetype unicode usb vim-syntax vhosts wmf xattr xml xmlrpc xpm
- xsl zlib"
-@
-
-
-1.10
-log
-@Checked in.
-@
-text
-@d8 2
-@
-
-
-1.9
-log
-@Checked in.
-@
-text
-@d11 1
-a11 1
- gd gif gmp gnutls gs gsl gtk guile hal html idn ipv6 ithreads java javascript jbig jpeg
-d25 1
-a25 1
- unique_id userdir usertrack vhost_alias "
-@
-
-
-1.8
-log
-@Checked in.
-@
-text
-@d8 2
-@
-
-
-1.7
-log
-@Checked in.
-@
-text
-@d9 1
-a9 1
- gd gif gmp gnutls gs gtk guile hal html idn ipv6 ithreads java javascript jbig jpeg
-@
-
-
-1.6
-log
-@Checked in.
-@
-text
-@d8 1
-a8 1
-USE="X acl apache2 bash-completion bzip2 caps curl doc examples expat fam fastcgi ftp
-d12 1
-a12 1
- png python ruby samba sasl session slp snmp soap sqlite sqlite3 spell sse sse2 tcl
-@
-
-
-1.5
-log
-@Checked in.
-@
-text
-@d20 1
-a20 1
- filter headers ident imagemap include info log_config log_forensic logio
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@d9 2
-a10 2
- gd gif gmp gnutls gs gtk hal html idn ipv6 ithreads java javascript jbig jpeg
- kerberos ldap libwww lua maildir mailwrapper mbox mmx modperl motif mysql nis
-d12 1
-a12 1
- png python samba sasl session slp snmp soap sqlite sqlite3 spell sse sse2 tcl
-d16 13
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d9 3
-a11 2
- gd gif gmp gnutls gs gtk html idn ipv6 ithreads java javascript jbig jpeg
- kerberos ldap lua mailwrapper mbox mmx modperl motif mysql nis nptl odbc pam pcre pdf php pic
-d16 1
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d10 1
-a10 1
- kerberos ldap lua mbox mmx modperl motif mysql nis nptl odbc pam pcre pdf php pic
-d12 1
-a12 1
- threads tk tiff truetype unicode usb vhosts wmf xattr xml xmlrpc xpm
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d8 6
-a13 14
-USE="X acl acpi aio apache2 authdaemond bash-completion bcmath bind-mysql
- bzip2 bzlib calendar caps cddb cgi cli cpdflib cscope ctype curl
- curlwrappers dba dbase dbus dga dio diskio dlz doc elf epydoc examples exif
- expat extraengine fam ffmpeg flatfile fontconfig ftp gcj gd gd-external gif gmp
- gnutls gs gtk hash iconv idea idn imap inifile innodb ipv6 ithreads java
- javascript jbig jpeg kerberos ldap ldap-sasl lm_sensors lua lzw mbox mdb
- memlimit mfd-rewrites mhash mime ming mmx mpeg mpg modperl motif mudflap
- multiuser mysql mysqli net nis nptl oav objc objc++ objc-gc odbc openssl
- pad pam pcntl pcre pdf pdo-external pear perlsuid php pic png posix python
- qt3support quotas rle rpc samba sasl search sendmail session shaper sharedext
- sharedmem simplexml slp smux snmp soap sqlite sockets spell spl sse sse2
- suhosin syslog sysvipc tcl threads tk tidy tiff tokenizer truetype
- unicode usb vda vim-with-x vhosts wddx wmf xattr xml xmlreader xmlrpc xmlwriter
- xpm xsl yaz zip zlib"
-d34 2
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.05.26.21.14.42; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.25.14.58.11; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# mdadm configuration file
-#
-# mdadm will function properly without the use of a configuration file,
-# but this file is useful for keeping track of arrays and member disks.
-# In general, a mdadm.conf file is created, and updated, after arrays
-# are created. This is the opposite behavior of /etc/raidtab which is
-# created prior to array construction.
-#
-#
-# the config file takes two types of lines:
-#
-# DEVICE lines specify a list of devices of where to look for
-# potential member disks
-#
-# ARRAY lines specify information about how to identify arrays so
-# so that they can be activated
-#
-# You can have more than one device line and use wild cards. The first
-# example includes SCSI the first partition of SCSI disks /dev/sdb,
-# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second
-# line looks for array slices on IDE disks.
-#
-#DEVICE /dev/sd[bcdjkl]1
-#DEVICE /dev/hda1 /dev/hdb1
-#
-# If you mount devfs on /dev, then a suitable way to list all devices is:
-#DEVICE /dev/discs/*/*
-#
-#
-#
-# ARRAY lines specify an array to assemble and a method of identification.
-# Arrays can currently be identified by using a UUID, superblock minor number,
-# or a listing of devices.
-#
-# super-minor is usually the minor number of the metadevice
-# UUID is the Universally Unique Identifier for the array
-# Each can be obtained using
-#
-# mdadm -D <md>
-#
-#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
-#ARRAY /dev/md1 super-minor=1
-#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
-#
-# ARRAY lines can also specify a "spare-group" for each array. mdadm --monitor
-# will then move a spare between arrays in a spare-group if one array has a failed
-# drive but no spare
-#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
-#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
-#
-# When used in --follow (aka --monitor) mode, mdadm needs a
-# mail address and/or a program. This can be given with "mailaddr"
-# and "program" lines to that monitoring can be started using
-# mdadm --follow --scan & echo $! > /var/run/mdadm
-# If the lines are not found, mdadm will exit quietly
-#MAILADDR root@@mydomain.tld
-MAILADDR frank@@brehm-online.com
-#PROGRAM /usr/sbin/handle-mdadm-events
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d57 1
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.05.26.21.08.58; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.26.14.45.15; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# NOTES:
-# DHCP clients can append or replace NTP configuration files.
-# You should consult your DHCP client documentation about its
-# default behaviour and how to change it.
-
-# Name of the servers ntpd should sync with
-# Please respect the access policy as stated by the responsible person.
-#server ntp.example.tld iburst
-
-# Common pool for random people
-#server pool.ntp.org
-
-# Pools for Gentoo users
-server 0.gentoo.pool.ntp.org
-server 1.gentoo.pool.ntp.org
-server 2.gentoo.pool.ntp.org
-server 3.gentoo.pool.ntp.org
-
-##
-# A list of available servers can be found here:
-# http://www.pool.ntp.org/
-# http://www.pool.ntp.org/#use
-# A good way to get servers for your machine is:
-# netselect -s 3 pool.ntp.org
-##
-
-# you should not need to modify the following paths
-driftfile /var/lib/ntp/ntp.drift
-
-logfile /var/log/ntp
-
-statsdir /var/log/ntpstats/
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
-
-#server ntplocal.example.com prefer
-#server timeserver.example.org
-
-# Warning: Using default NTP settings will leave your NTP
-# server accessible to all hosts on the Internet.
-
-# If you want to deny all machines (including your own)
-# from accessing the NTP server, uncomment:
-#restrict default ignore
-
-
-# To deny other machines from changing the
-# configuration but allow localhost:
-restrict default nomodify nopeer
-restrict 127.0.0.1
-
-
-# To allow machines within your network to synchronize
-# their clocks with your server, but ensure they are
-# not allowed to configure the server or used as peers
-# to synchronize against, uncomment this line.
-#
-#restrict 192.168.0.0 mask 255.255.255.0 nomodify nopeer notrap
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d30 7
-@
+++ /dev/null
-head 1.3;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.3
-date 2010.12.01.22.06.55; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.12.01.21.18.58; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.18.53.27; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@root:x:0:0:root Helga:/root:/bin/bash
-bin:x:1:1:bin:/bin:/bin/false
-daemon:x:2:2:daemon:/sbin:/bin/false
-adm:x:3:4:adm:/var/adm:/bin/false
-lp:x:4:7:lp:/var/spool/lpd:/bin/false
-sync:x:5:0:sync:/sbin:/bin/sync
-shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
-halt:x:7:0:halt:/sbin:/sbin/halt
-mail:x:8:12:mail:/var/spool/mail:/bin/false
-news:x:9:13:news:/usr/lib/news:/bin/false
-uucp:x:10:14:uucp:/var/spool/uucppublic:/bin/false
-operator:x:11:0:operator:/root:/bin/bash
-man:x:13:15:man:/usr/share/man:/bin/false
-postmaster:x:14:12:postmaster:/var/spool/mail:/bin/false
-cron:x:16:16:added by portage for cronbase:/var/spool/cron:/sbin/nologin
-ftp:x:21:21:added by portage for ftpbase:/home/ftp:/sbin/nologin
-sshd:x:22:22:added by portage for openssh:/var/empty:/sbin/nologin
-at:x:25:25:added by portage for at:/var/spool/at/atjobs:/sbin/nologin
-games:x:36:35:added by portage for enemy-territory:/usr/games:/bin/bash
-named:x:40:40:added by portage for bind:/etc/bind:/sbin/nologin
-mysql:x:60:60:added by portage for mysql:/dev/null:/sbin/nologin
-apache:x:81:81:added by portage for apache:/var/www:/sbin/nologin
-ulogd:x:101:197:added by portage for ulogd:/var/log/ulogd:/sbin/nologin
-tcpdump:x:102:196:added by portage for tcpdump:/dev/null:/sbin/nologin
-messagebus:x:103:110:added by portage for dbus:/dev/null:/sbin/nologin
-nagios:x:104:104:added by portage for nagios-plugins-snmp:/var/nagios/home:/bin/bash
-teamspeak3:x:105:103:added by portage for teamspeak-server-bin:/dev/null:/sbin/nologin
-polw:x:106:102:added by portage for policyd-weight:/dev/null:/sbin/nologin
-postgrey:x:107:101:added by portage for postgrey:/dev/null:/sbin/nologin
-amavis:x:108:999:added by portage for amavisd-new:/var/amavis:/sbin/nologin
-clamav:x:109:998:added by portage for clamav:/dev/null:/sbin/nologin
-proftpd:x:110:1008:added by portage for proftpd:/dev/null:/sbin/nologin
-rpc:x:111:111:added by portage for portmap:/dev/null:/sbin/nologin
-ntp:x:123:123:added by portage for ntp:/dev/null:/sbin/nologin
-postfix:x:207:207:added by portage for postfix:/var/spool/postfix:/sbin/nologin
-smmsp:x:209:209:smmsp:/var/spool/mqueue:/bin/false
-portage:x:250:250:portage:/var/tmp/portage:/bin/false
-ldap:x:439:439:added by portage for openldap:/usr/lib64/openldap:/sbin/nologin
-nobody:x:65534:65534:nobody:/:/bin/false
-taurec:x:1000:100:Jörn Valentin:/home/taurec:/bin/bash
-morph:x:1001:100:Daniel Wendler:/home/morph:/bin/bash
-patrick:x:1004:100:Patrick Hennig:/home/patrick:/bin/bash
-vivi:x:1006:100:Vivien Winkler:/home/vivi:/bin/bash
-frank:x:1017:100:Frank Brehm:/home/frank:/bin/bash
-doris:x:1019:100:Doris Hennig:/home/doris:/bin/bash
-davis:x:1020:100:Davis Winkler:/home/davis:/bin/bash
-thomas:x:1021:100:Thomas Schmidt:/home/thomas:/bin/bash
-vmail:x:1023:1023:Virtual Mailuser:/home/vmail:/bin/false
-alfred:x:1024:100:Alfred Haberkorn:/home/alfred:/bin/bash
-steffen:x:1025:100:Steffen Brehm:/home/steffen:/bin/bash
-heiko:x:1029:100:Heiko Hennig:/home/heiko:/bin/bash
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d19 1
-d32 1
-d36 1
-d40 4
-d45 7
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d1 1
-a1 1
-root:x:0:0:root:/root:/bin/bash
-d15 2
-a16 2
-portage:x:250:250:portage:/var/tmp/portage:/bin/false
-nobody:x:65534:65534:nobody:/:/bin/false
-d18 1
-a18 1
-cron:x:16:16:added by portage for cronbase:/var/spool/cron:/sbin/nologin
-d20 2
-a21 1
-at:x:25:25:added by portage for at:/var/spool/at/atjobs:/sbin/nologin
-a23 5
-ntp:x:123:123:added by portage for ntp:/dev/null:/sbin/nologin
-frank:x:1017:100:Frank Brehm:/home/frank:/bin/bash
-ldap:x:439:439:added by portage for openldap:/usr/lib64/openldap:/sbin/nologin
-mysql:x:60:60:added by portage for mysql:/dev/null:/sbin/nologin
-rpc:x:111:111:added by portage for portmap:/dev/null:/sbin/nologin
-a24 2
-apache:x:81:81:added by portage for apache:/var/www:/sbin/nologin
-ftp:x:21:21:added by portage for ftpbase:/home/ftp:/sbin/nologin
-a26 1
-postfix:x:207:207:added by portage for postfix:/var/spool/postfix:/sbin/nologin
-d31 7
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.26.13.07.36; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# ----------------------------------------------------------------
-# policyd-weight configuration (defaults) Version 0.1.14 beta-17
-# ----------------------------------------------------------------
-
-
- $DEBUG = 0; # 1 or 0 - don't comment
-
- $REJECTMSG = "550 Mail appeared to be SPAM or forged. Ask your Mail/DNS-Administrator to correct HELO and DNS MX settings or to get removed from DNSBLs";
-
- $REJECTLEVEL = 1; # Mails with scores which exceed this
- # REJECTLEVEL will be rejected
-
- $DEFER_STRING = 'IN_SPAMCOP= BOGUS_MX=';
- # A space separated case-sensitive list of
- # strings on which if found in the $RET
- # logging-string policyd-weight changes
- # its action to $DEFER_ACTION in case
- # of rejects.
- # USE WITH CAUTION!
- # DEFAULT: "IN_SPAMCOP= BOGUS_MX="
-
-
- $DEFER_ACTION = '450'; # Possible values: DEFER_IF_PERMIT,
- # DEFER_IF_REJECT,
- # 4xx response codes. See also access(5)
- # DEFAULT: 450
-
- $DEFER_LEVEL = 5; # DEFER mail only up to this level
- # scores greater than DEFER_LEVEL will be
- # rejected
- # DEFAULT: 5
-
- $DNSERRMSG = '450 No DNS entries for your MTA, HELO and Domain. Contact YOUR administrator';
-
- $dnsbl_checks_only = 0; # 1: ON, 0: OFF (default)
- # If ON request that ALL clients are only
- # checked against RBLs
-
- @@dnsbl_checks_only_regexps = (
- # qr/[^.]*(exch|smtp|mx|mail).*\..*\../,
- # qr/yahoo.com$/
-); # specify a comma-separated list of regexps
- # for client hostnames which shall only
- # be RBL checked. This does not work for
- # postfix' "unknown" clients.
- # The usage of this should not be the norm
- # and is a tool for people which like to
- # shoot in their own foot.
- # DEFAULT: empty
-
-
- $LOG_BAD_RBL_ONLY = 1; # 1: ON (default), 0: OFF
- # When set to ON it logs only RBLs which
- # affect scoring (positive or negative)
-
-## DNSBL settings
- @@dnsbl_score = (
-# HOST, HIT SCORE, MISS SCORE, LOG NAME
- 'pbl.spamhaus.org', 3.25, 0, 'DYN_PBL_SPAMHAUS',
- 'sbl-xbl.spamhaus.org', 4.35, -1.5, 'SBL_XBL_SPAMHAUS',
- 'bl.spamcop.net', 3.75, -1.5, 'SPAMCOP',
- 'dnsbl.njabl.org', 4.25, -1.5, 'BL_NJABL',
- 'list.dsbl.org', 4.35, 0, 'DSBL_ORG',
- 'ix.dnsbl.manitu.net', 4.35, 0, 'IX_MANITU'
-);
-
- $MAXDNSBLHITS = 2; # If Client IP is listed in MORE
- # DNSBLS than this var, it gets
- # REJECTed immediately
-
- $MAXDNSBLSCORE = 8; # alternatively, if the score of
- # DNSBLs is ABOVE this
- # level, reject immediately
-
- $MAXDNSBLMSG = '550 Your MTA is listed in too many DNSBLs';
-
-## RHSBL settings
- @@rhsbl_score = (
- 'multi.surbl.org', 4, 0, 'SURBL',
- 'rhsbl.ahbl.org', 4, 0, 'AHBL',
- 'dsn.rfc-ignorant.org', 3.5, 0, 'DSN_RFCI',
- 'postmaster.rfc-ignorant.org', 0.1, 0, 'PM_RFCI',
- 'abuse.rfc-ignorant.org', 0.1, 0, 'ABUSE_RFCI'
-);
-
- $BL_ERROR_SKIP = 2; # skip a RBL if this RBL had this many continuous
- # errors
-
- $BL_SKIP_RELEASE = 10; # skip a RBL for that many times
-
-## cache stuff
- $LOCKPATH = '/var/run/policyd-weight/'; # must be a directory (add
- # trailing slash)
-
- $SPATH = $LOCKPATH.'/polw.sock'; # socket path for the cache
- # daemon.
-
- $MAXIDLECACHE = 60; # how many seconds the cache may be idle
- # before starting maintenance routines
- # NOTE: standard maintenance jobs happen
- # regardless of this setting.
-
- $MAINTENANCE_LEVEL = 5; # after this number of requests do following
- # maintenance jobs:
- # checking for config changes
-
-# negative (i.e. SPAM) result cache settings ##################################
-
- $CACHESIZE = 2000; # set to 0 to disable caching for spam results.
- # To this level the cache will be cleaned.
-
- $CACHEMAXSIZE = 4000; # at this number of entries cleanup takes place
-
- $CACHEREJECTMSG = '550 temporarily blocked because of previous errors';
-
- $NTTL = 1; # after NTTL retries the cache entry is deleted
-
- $NTIME = 30; # client MUST NOT retry within this seconds in order
- # to decrease TTL counter
-
-
-# positve (i.,e. HAM) result cache settings ###################################
-
- $POSCACHESIZE = 1000; # set to 0 to disable caching of HAM. To this number
- # of entries the cache will be cleaned
-
- $POSCACHEMAXSIZE = 2000; # at this number of entries cleanup takes place
-
- $POSCACHEMSG = 'using cached result';
-
- $PTTL = 60; # after PTTL requests the HAM entry must
- # succeed one time the RBL checks again
-
- $PTIME = '3h'; # after $PTIME in HAM Cache the client
- # must pass one time the RBL checks again.
- # Values must be nonfractal. Accepted
- # time-units: s, m, h, d
-
- $TEMP_PTIME = '1d'; # The client must pass this time the RBL
- # checks in order to be listed as hard-HAM
- # After this time the client will pass
- # immediately for PTTL within PTIME
-
-
-## DNS settings
- $DNS_RETRIES = 2; # Retries for ONE DNS-Lookup
-
- $DNS_RETRY_IVAL = 2; # Retry-interval for ONE DNS-Lookup
-
- $MAXDNSERR = 3; # max error count for unresponded queries
- # in a complete policy query
-
- $MAXDNSERRMSG = 'passed - too many local DNS-errors';
-
- $PUDP = 0; # persistent udp connection for DNS queries.
- # broken in Net::DNS version 0.51. Works with
- # Net::DNS 0.53; DEFAULT: off
-
- $USE_NET_DNS = 0; # Force the usage of Net::DNS for RBL lookups.
- # Normally policyd-weight tries to use a faster
- # RBL lookup routine instead of Net::DNS
-
-
- $NS = ''; # A list of space separated NS IPs
- # This overrides resolv.conf settings
- # Example: $NS = '1.2.3.4 1.2.3.5';
- # DEFAULT: empty
-
-
- $IPC_TIMEOUT = 2; # timeout for receiving from cache instance
-
- $TRY_BALANCE = 0; # If set to 1 policyd-weight closes connections
- # to smtpd clients in order to avoid too many
- # established connections to one policyd-weight
- # child
-
-# scores for checks, WARNING: they may manipulate eachother
-# or be factors for other scores.
-# HIT score, MISS Score
- @@client_ip_eq_helo_score = (1.5, -1.25 );
- @@helo_score = (1.5, -2 );
- @@helo_from_mx_eq_ip_score = (1.5, -3.1 );
- @@helo_numeric_score = (2.5, 0 );
- @@from_match_regex_verified_helo = (1, -2 );
- @@from_match_regex_unverified_helo = (1.6, -1.5 );
- @@from_match_regex_failed_helo = (2.5, 0 );
- @@helo_seems_dialup = (1.5, 0 );
- @@failed_helo_seems_dialup = (2, 0 );
- @@helo_ip_in_client_subnet = (0, -1.2 );
- @@helo_ip_in_cl16_subnet = (0, -0.41 );
- @@client_seems_dialup_score = (3.75, 0 );
- @@from_multiparted = (1.09, 0 );
- @@from_anon = (1.17, 0 );
- @@bogus_mx_score = (2.1, 0 );
- @@random_sender_score = (0.25, 0 );
- @@rhsbl_penalty_score = (3.1, 0 );
- @@enforce_dyndns_score = (3, 0 );
-
-
- $VERBOSE = 0;
-
- $ADD_X_HEADER = 1; # Switch on or off an additional
- # X-policyd-weight: header
- # DEFAULT: on
-
-
- $DEFAULT_RESPONSE = 'DUNNO default'; # Fallback response in case
- # the weighted check didn't
- # return any response (should never
- # appear).
-
-
-
-#
-# Syslogging options for verbose mode and for fatal errors.
-# NOTE: comment out the $syslog_socktype line if syslogging does not
-# work on your system.
-#
-
- $syslog_socktype = 'unix'; # inet, unix, stream, console
-
- $syslog_facility = "mail";
- $syslog_options = "pid";
- $syslog_priority = "info";
- $syslog_ident = "postfix/policyd-weight";
-
-
-#
-# Process Options
-#
- $USER = "polw"; # User must be a username, no UID
-
- $GROUP = ""; # specify GROUP if necessary
- # DEFAULT: empty, will be initialized as
- # $USER
-
- $MAX_PROC = 50; # Upper limit if child processes
- $MIN_PROC = 3; # keep that minimum processes alive
-
- $TCP_PORT = 12525; # The TCP port on which policyd-weight
- # listens for policy requests from postfix
-
- $BIND_ADDRESS = '127.0.0.1'; # IP-Address on which policyd-weight will
- # listen for requests.
- # You may only list ONE IP here, if you want
- # to listen on all IPs you need to say 'all'
- # here. Default is '127.0.0.1'.
- # You need to restart policyd-weight if you
- # change this.
-
- $SOMAXCONN = 1024; # Maximum of client connections
- # policyd-weight accepts
- # Default: 1024
-
-
- $CHILDIDLE = 240; # how many seconds a child may be idle before
- # it dies.
-
- $PIDFILE = "/var/run/policyd-weight.pid";
-
-@
+++ /dev/null
-head 1.3;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.3
-date 2010.12.01.22.18.09; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.12.01.21.24.20; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.18.53.27; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@root:$6$0briKxmJ$IhtNDwr2yTK6nImlWue6P.NqFEURw9rOYmTXImRGR6EyBsls.yh.CIay2UU01fJ18NGmnNw7NkccUoVNlSgvL1:14942:0:::::
-bin:*:9797:0:::::
-daemon:*:9797:0:::::
-adm:*:9797:0:::::
-lp:*:9797:0:::::
-sync:*:9797:0:::::
-shutdown:*:9797:0:::::
-halt:*:9797:0:::::
-mail:*:9797:0:::::
-news:*:9797:0:::::
-uucp:*:9797:0:::::
-operator:*:9797:0:::::
-man:*:9797:0:::::
-postmaster:*:9797:0:::::
-cron:!:14942::::::
-ftp:!:14944::::::
-sshd:!:14931::::::
-at:!:14942::::::
-games:!:14755:0:99999:7:::
-named:!:14942::::::
-mysql:!:14943::::::
-apache:!:14944::::::
-ulogd:!:14942::::::
-tcpdump:!:14942::::::
-messagebus:!:14943::::::
-nagios:!:14944::::::
-teamspeak3:!:14944::::::
-polw:!:14944::::::
-postgrey:!:14944::::::
-amavis:!:14944::::::
-clamav:!:14944::::::
-proftpd:!:14755:0:99999:7:::
-rpc:!:14943::::::
-ntp:!:14942::::::
-postfix:!:14944::::::
-smmsp:!:14944::::::
-portage:!:14944::::::
-ldap:!:14943::::::
-nobody:*:9797:0:::::
-taurec:$1$aIByn.zw$HuqtNPuXReU4CqFQ21D0m1:14754:0:99999:7:::
-morph:$1$VXZ6JKs.$5BFb1vxIPcpV8qvfGU9721:14756:0:99999:7:::
-patrick:$6$cayHKFTo$y3plIUQem6gONYo/D.VqfmcUJRgJ08lxWKzr.Q2NYw9P6BWOGLFgNi6HyWQ8sCjR9Ky7cWvBULtyxJG4xq2Bq1:14756:0:99999:7:::
-vivi:$6$XgM4lbim$X2/XVS1Ymb1g0jDaoEFXaBvBRGpTFEk/PwZabvj1f2fRClMCJi4wDW1yOE2ScY6DBwmk9rHfykwI2u5WFgMe..:14756:0:99999:7:::
-frank:$6$DFnYHGpc$8YQInxXqQjHzWX/1m3xCeK8Myr1t4NoehN.HYeSrdVQU6IAr7BTjgn4yex.eTTSWysqnfGQxXe5yE.P4aIn8p.:14758:0:99999:7:::
-doris:$6$ytvH/1Wr$TBx1U/JLr62XC5slXfmU3fm1qz8wDqS5Awa23RYk7yxNTYEuRukEOOyq6wGhoB32NJqBtLR/8lPW0Ed6jGnFa0:14756:0:99999:7:::
-davis:$1$3T8Trt8I$msRWT6I6Th7I4Oh/ZPJ5L0:14756:0:99999:7:::
-thomas:$1$0XWKbUsf$U73Y/KdvYm6RVQMwMUowF0:14756:0:99999:7:::
-vmail:$1$PlXil62T$WTZDda6da9pKsgvD3S4vu.:14756:0:99999:7:::
-alfred:$6$7QGTopxZ$8cZaNAdFh9HPzgmo2J1klt1pXKacybRWfp3BnTY3q8ufnp8lNYFEdstvxgHD9iqSL8FpvrsGeC3V3BXhgzZO/.:14756:0:99999:7:::
-steffen:$6$hjuxkJql$9/ANdpksdci1A40kjix8xMXEnrhCeGlfGxHxsWHADY44Xe.NY0sahgAzIAhTtX5/gIaCoTU37z2QbHCoBPy5k0:14756:0:99999:7:::
-heiko:$1$OcX7G9Sq$YjjhAKtIp7UyxeZuHysq7/:14756:0:99999:7:::
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d19 1
-d32 1
-d36 1
-d40 4
-d45 7
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@a1 4
-halt:*:9797:0:::::
-operator:*:9797:0:::::
-shutdown:*:9797:0:::::
-sync:*:9797:0:::::
-d6 3
-a9 1
-postmaster:*:9797:0:::::
-d12 5
-a16 1
-nobody:*:9797:0:::::
-d18 1
-a18 1
-cron:!:14942::::::
-d20 2
-a21 1
-at:!:14942::::::
-a23 5
-ntp:!:14942::::::
-frank:$6$DFnYHGpc$8YQInxXqQjHzWX/1m3xCeK8Myr1t4NoehN.HYeSrdVQU6IAr7BTjgn4yex.eTTSWysqnfGQxXe5yE.P4aIn8p.:14758:0:99999:7:::
-ldap:!:14943::::::
-mysql:!:14943::::::
-rpc:!:14943::::::
-a24 2
-apache:!:14944::::::
-ftp:!:14944::::::
-a26 1
-postfix:!:14944::::::
-d31 7
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.22.15.07; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Sample configuration file for smartd. See man smartd.conf.
-
-# Home page is: http://smartmontools.sourceforge.net
-
-# $Id: smartd.conf,v 1.45 2006/11/12 23:39:04 dpgilbert Exp $
-
-# smartd will re-read the configuration file if it receives a HUP
-# signal
-
-# The file gives a list of devices to monitor using smartd, with one
-# device per line. Text after a hash (#) is ignored, and you may use
-# spaces and tabs for white space. You may use '\' to continue lines.
-
-# You can usually identify which hard disks are on your system by
-# looking in /proc/ide and in /proc/scsi.
-
-# The word DEVICESCAN will cause any remaining lines in this
-# configuration file to be ignored: it tells smartd to scan for all
-# ATA and SCSI devices. DEVICESCAN may be followed by any of the
-# Directives listed below, which will be applied to all devices that
-# are found. Most users should comment out DEVICESCAN and explicitly
-# list the devices that they wish to monitor.
-DEVICESCAN
-
-# Alternative setting to ignore temperature and power-on hours reports
-# in syslog.
-#DEVICESCAN -I 194 -I 231 -I 9
-
-# Alternative setting to report more useful raw temperature in syslog.
-#DEVICESCAN -R 194 -R 231 -I 9
-
-# Alternative setting to report raw temperature changes >= 5 Celsius
-# and min/max temperatures.
-#DEVICESCAN -I 194 -I 231 -I 9 -W 5
-
-# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
-# automatic online data collection, automatic Attribute autosave, and
-# start a short self-test every day between 2-3am, and a long self test
-# Saturdays between 3-4am.
-#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
-
-# Monitor SMART status, ATA Error Log, Self-test log, and track
-# changes in all attributes except for attribute 194
-#/dev/hdb -H -l error -l selftest -t -I 194
-
-# Monitor all attributes except normalized Temperature (usually 194),
-# but track Temperature changes >= 4 Celsius, report Temperatures
-# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
-# Send mail on SMART failures or when Temperature is >= 55 Celsius.
-#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@@example.com
-
-# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
-# ATA Translation (SAT) layer is between the OS and the device then
-# this can be flagged with the '-d sat' option. This situation may
-# become common with SATA disks in SAS and FC environments.
-# /dev/sda -a -d sat
-
-# A very silent check. Only report SMART health status if it fails
-# But send an email in this case
-#/dev/hdc -H -C 0 -U 0 -m admin@@example.com
-
-# First two SCSI disks. This will monitor everything that smartd can
-# monitor. Start extended self-tests Wednesdays between 6-7pm and
-# Sundays between 1-2 am
-#/dev/sda -d scsi -s L/../../3/18
-#/dev/sdb -d scsi -s L/../../7/01
-
-# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
-# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
-# and 4-5 am.
-# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
-# is DEPRECATED. Use the /dev/tweN character device interface instead.
-# For example /dev/twe0, /dev/twe1, and so on.
-#/dev/sdc -d 3ware,0 -a -s L/../../7/01
-#/dev/sdc -d 3ware,1 -a -s L/../../7/02
-#/dev/sdc -d 3ware,2 -a -s L/../../7/03
-#/dev/sdc -d 3ware,3 -a -s L/../../7/04
-
-# Monitor 2 ATA disks connected to a 3ware 9000 controller which uses
-# the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
-# between 1-2 and 3-4 am.
-#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
-#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
-
-# Same as above for Windows. Option '-d 3ware,N' is not necessary,
-# disk (port) number is specified in device name.
-# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
-#/dev/hdc,0 -a -s L/../../2/01
-#/dev/hdc,1 -a -s L/../../2/03
-
-# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
-# self-tests Sundays between 1-2, 2-3, and 3-4 am.
-#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
-#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
-#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
-
-# Monitor 2 ATA disks connected to the same PMPort which connected to the
-# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
-#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
-#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
-
-# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
-# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
-#
-# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
-# -T TYPE set the tolerance to one of: normal, permissive
-# -o VAL Enable/disable automatic offline tests (on/off)
-# -S VAL Enable/disable attribute autosave (on/off)
-# -n MODE No check. MODE is one of: never, sleep, standby, idle
-# -H Monitor SMART Health Status, report if failed
-# -l TYPE Monitor SMART log. Type is one of: error, selftest
-# -f Monitor for failure of any 'Usage' Attributes
-# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
-# -M TYPE Modify email warning behavior (see man page)
-# -s REGE Start self-test when type/date matches regular expression (see man page)
-# -p Report changes in 'Prefailure' Normalized Attributes
-# -u Report changes in 'Usage' Normalized Attributes
-# -t Equivalent to -p and -u Directives
-# -r ID Also report Raw values of Attribute ID with -p, -u or -t
-# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
-# -i ID Ignore Attribute ID for -f Directive
-# -I ID Ignore Attribute ID for -p, -u or -t Directive
-# -C ID Report if Current Pending Sector count non-zero
-# -U ID Report if Offline Uncorrectable count non-zero
-# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
-# -v N,ST Modifies labeling of Attribute N (see man page)
-# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
-# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
-# -P TYPE Drive-specific presets: use, ignore, show, showall
-# # Comment: text after a hash sign is ignored
-# \ Line continuation character
-# Attribute ID is a decimal integer 1 <= ID <= 255
-# except for -C and -U, where ID = 0 turns them off.
-# All but -d, -m and -M Directives are only implemented for ATA devices
-#
-# If the test string DEVICESCAN is the first uncommented text
-# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
-# DEVICESCAN may be followed by any desired Directives.
-@
+++ /dev/null
-head 1.3;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.3
-date 2010.10.12.07.51.44; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.05.27.09.10.01; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.26.09.20.32; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@# Example configuration for ulogd
-# $Id$
-# Adapted to Debian by Achilleas Kotsis <achille@@debian.gr>
-
-[global]
-######################################################################
-# GLOBAL OPTIONS
-######################################################################
-
-
-# logfile for status messages
-logfile="/var/log/ulogd/daemon.log"
-
-# loglevel: debug(1), info(3), notice(5), error(7) or fatal(8)
-loglevel=3
-
-######################################################################
-# PLUGIN OPTIONS
-######################################################################
-
-# We have to configure and load all the plugins we want to use
-
-# general rules:
-# 1. load the plugins _first_ from the global section
-# 2. options for each plugin in seperate section below
-
-
-plugin="/usr/lib64/ulogd/ulogd_inppkt_NFLOG.so"
-plugin="/usr/lib64/ulogd/ulogd_inppkt_ULOG.so"
-plugin="/usr/lib64/ulogd/ulogd_inpflow_NFCT.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_IFINDEX.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_IP2STR.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_IP2BIN.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_PRINTPKT.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_HWHDR.so"
-plugin="/usr/lib64/ulogd/ulogd_filter_PRINTFLOW.so"
-#plugin="/usr/lib64/ulogd/ulogd_filter_MARK.so"
-plugin="/usr/lib64/ulogd/ulogd_output_LOGEMU.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_SYSLOG.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_XML.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_OPRINT.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_NACCT.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_PCAP.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_PGSQL.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_MYSQL.so"
-#plugin="/usr/lib64/ulogd/ulogd_output_DBI.so"
-plugin="/usr/lib64/ulogd/ulogd_raw2packet_BASE.so"
-
-# this is a stack for logging packet send by system via LOGEMU
-stack=log1:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-
-# this is a stack for packet-based logging via LOGEMU
-stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-
-# this is a stack for ULOG packet-based logging via LOGEMU
-stack=ulog1:ULOG,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-
-# this is a stack for packet-based logging via LOGEMU with filtering on MARK
-#stack=log2:NFLOG,mark1:MARK,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-
-# this is a stack for flow-based logging via LOGEMU
-#stack=ct1:NFCT,ip2str1:IP2STR,print1:PRINTFLOW,emu1:LOGEMU
-
-# this is a stack for flow-based logging via OPRINT
-#stack=ct1:NFCT,op1:OPRINT
-
-# this is a stack for flow-based logging via XML
-#stack=ct1:NFCT,xml1:XML
-
-# this is a stack for logging in XML
-#stack=log1:NFLOG,xml1:XML
-
-# this is a stack for NFLOG packet-based logging to PCAP
-#stack=log2:NFLOG,base1:BASE,pcap1:PCAP
-
-# this is a stack for logging packet to MySQL
-#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2bin1:IP2BIN,mac2str1:HWHDR,mysql1:MYSQL
-
-# this is a stack for logging packet to PGsql after a collect via NFLOG
-#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,mac2str1:HWHDR,pgsql1:PGSQL
-
-# this is a stack for logging packets to syslog after a collect via NFLOG
-#stack=log3:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,sys1:SYSLOG
-
-# this is a stack for flow-based logging to MySQL
-#stack=ct1:NFCT,ip2bin1:IP2BIN,mysql2:MYSQL
-
-# this is a stack for flow-based logging to PGSQL
-#stack=ct1:NFCT,ip2str1:IP2STR,pgsql2:PGSQL
-
-# this is a stack for flow-based logging to PGSQL without local hash
-#stack=ct1:NFCT,ip2str1:IP2STR,pgsql3:PGSQL
-
-
-# this is a stack for flow-based logging in NACCT compatible format
-#stack=ct1:NFCT,ip2str1:IP2STR,nacct1:NACCT
-
-[ct1]
-#netlink_socket_buffer_size=217088
-#netlink_socket_buffer_maxsize=1085440
-#netlink_resync_timeout=60 # seconds to wait to perform resynchronization
-#pollinterval=10 # use poll-based logging instead of event-driven
-
-[ct2]
-#netlink_socket_buffer_size=217088
-#netlink_socket_buffer_maxsize=1085440
-hash_enable=0
-
-# Logging of system packet through NFLOG
-[log1]
-# netlink multicast group (the same as the iptables --nflog-group param)
-# Group O is used by the kernel to log connection tracking invalid message
-group=0
-#netlink_socket_buffer_size=217088
-#netlink_socket_buffer_maxsize=1085440
-# set number of packet to queue inside kernel
-#netlink_qthreshold=1
-# set the delay before flushing packet in the queue inside kernel (in 10ms)
-#netlink_qtimeout=100
-
-# packet logging through NFLOG for group 1
-[log2]
-# netlink multicast group (the same as the iptables --nflog-group param)
-group=1 # Group has to be different from the one use in log1
-#netlink_socket_buffer_size=217088
-#netlink_socket_buffer_maxsize=1085440
-# If your kernel is older than 2.6.29 and if a NFLOG input plugin with
-# group 0 is not used by any stack, you need to have at least one NFLOG
-# input plugin with bind set to 1. If you don't do that you may not
-# receive any message from the kernel.
-#bind=1
-
-# packet logging through NFLOG for group 2, numeric_label is
-# set to 1
-[log3]
-# netlink multicast group (the same as the iptables --nflog-group param)
-group=2 # Group has to be different from the one use in log1/log2
-numeric_label=1 # you can label the log info based on the packet verdict
-#netlink_socket_buffer_size=217088
-#netlink_socket_buffer_maxsize=1085440
-#bind=1
-
-[ulog1]
-# netlink multicast group (the same as the iptables --ulog-nlgroup param)
-nlgroup=1
-#numeric_label=0 # optional argument
-
-[emu1]
-file="/var/log/ulogd/syslogemu.log"
-sync=1
-
-[op1]
-file="/var/log/ulogd/oprint.log"
-#file="/var/log/ulogd_oprint.log"
-sync=1
-
-[xml1]
-directory="/var/log/ulogd/"
-sync=1
-
-[pcap1]
-sync=1
-
-[mysql1]
-db="nulog"
-host="localhost"
-user="nupik"
-table="ulog"
-pass="changeme"
-procedure="INSERT_PACKET_FULL"
-
-[mysql2]
-db="nulog"
-host="localhost"
-user="nupik"
-table="ulog"
-pass="changeme"
-procedure="INSERT_CT"
-
-[pgsql1]
-db="nulog"
-host="localhost"
-user="nupik"
-table="ulog"
-pass="changeme"
-procedure="INSERT_PACKET_FULL"
-
-[pgsql2]
-db="nulog"
-host="localhost"
-user="nupik"
-table="ulog2_ct"
-pass="changeme"
-procedure="INSERT_CT"
-
-[pgsql3]
-db="nulog"
-host="localhost"
-user="nupik"
-table="ulog2_ct"
-pass="changeme"
-procedure="INSERT_OR_REPLACE_CT"
-
-[dbi1]
-db="ulog2"
-dbtype="pgsql"
-host="localhost"
-user="ulog2"
-table="ulog"
-pass="ulog2"
-procedure="INSERT_PACKET_FULL"
-
-[sys2]
-facility=LOG_LOCAL2
-
-[nacct1]
-sync = 1
-
-[mark1]
-mark = 1
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d2 1
-a2 1
-# $Id: ulogd.conf,v 1.1 2010/05/26 09:20:32 root Exp $
-d40 1
-d67 6
-d101 2
-d118 2
-a119 2
-# set the delay before flushing packet in the queue inside kernel (in ms)
-#netlink_qtimeout=1000
-d154 5
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d2 1
-a2 1
-# $Id$
-d12 1
-a12 1
-logfile="/var/log/ulogd.log"
-d15 1
-a15 1
-loglevel=1
-d29 1
-a29 1
-#plugin="/usr/lib64/ulogd/ulogd_inppkt_ULOG.so"
-d39 1
-a39 1
-plugin="/usr/lib64/ulogd/ulogd_output_SYSLOG.so"
-d49 1
-a49 1
-#stack=log1:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-d52 1
-a52 1
-#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-d55 1
-a55 1
-#stack=ulog1:ULOG,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
-d140 1
-a140 1
-file="/var/log/ulogd_syslogemu.log"
-d144 1
-a144 1
-file="/var/log/ulogd_oprint.log"
-@
-0.000000 1294695034 0.000000
-1294695034
+0.000000 1343116740 0.000000
+1343116740
UTC
use strict;
-# Sample configuration file for amavisd-new (traditional style, chatty,
-# you may prefer to start with the more concise supplied amavisd.conf)
+# a minimalistic configuration file for amavisd-new with all necessary settings
#
-# See amavisd.conf-default for a list of all variables with their defaults;
-# for more details see documentation in INSTALL, README_FILES/*
-# and at http://www.ijs.si/software/amavisd/amavisd-new-docs.html
-
-# This software is licensed under the GNU General Public License (GPL).
-# See comments at the start of amavisd-new for the whole license text.
-
-#Sections:
-# Section I - Essential daemon and MTA settings
-# Section II - MTA specific
-# Section III - Logging
-# Section IV - Notifications/DSN, bounce/reject/discard/pass, quarantine
-# Section V - Per-recipient and per-sender handling, whitelisting, etc.
-# Section VI - Resource limits
-# Section VII - External programs, virus scanners, SpamAssassin
-# Section VIII - Debugging
-# Section IX - Policy banks (dynamic policy switching)
-
-#GENERAL NOTES:
-# This file is a normal Perl code, interpreted by Perl itself.
-# - make sure this file (or directory where it resides) is NOT WRITABLE
-# by mere mortals (not even vscan/amavis; best to make it owned by root),
-# otherwise it can represent a severe security risk!
-# - for values which are interpreted as booleans, it is recommended
-# to use 1 for true, and 0 or undef or '' for false;
-# Note that this interpretation of boolean values does not apply directly
-# to LDAP and SQL lookups, which follow their own rules - see README.lookups
-# and README.ldap (in short: use Y/N in SQL, and TRUE/FALSE in LDAP);
-# - Perl syntax applies. Most notably: strings in "" may include variables
-# (which start with $ or @); to include characters $ and @ and \ in double
-# quoted strings precede them by a backslash; in single-quoted strings
-# the $ and @ lose their special meaning, so it is usually easier to use
-# single quoted strings (or qw operator) for e-mail addresses.
-# In both types of quoting a backslash should to be doubled.
-# - variables with names starting with a '@' are lists, the values assigned
-# to them should be lists too, e.g. ('one@foo', $mydomain, "three");
-# note the comma-separation and parenthesis. If strings in the list
-# do not contain spaces nor variables, a Perl operator qw() may be used
-# as a shorthand to split its argument on whitespace and produce a list
-# of strings, e.g. qw( one@foo example.com three ); Note that the argument
-# to qw is quoted implicitly and no variable interpretation is done within
-# (no '$' variable evaluations). The #-initiated comments can NOT be used
-# within a string. In other words, $ and # lose their special meaning
-# within a qw argument, just like within '...' strings.
-# - all e-mail addresses in this file and as used internally by the daemon
-# are in their raw (rfc2821-unquoted and non-bracketed) form, i.e.
-# Bob "Funny" Dude@example.com, not: "Bob \"Funny\" Dude"@example.com
-# and not <"Bob \"Funny\" Dude"@example.com>; also: '' and not '<>'.
-# - the term 'default value' in examples below refers to the value of a
-# variable pre-assigned to it by the program; any explicit assignment
-# to a variable in this configuration file overrides the default value;
+# see amavisd.conf-default for a list of all variables with their defaults;
+# for more details see documentation in INSTALL, README_FILES/*
+# and at http://www.ijs.si/software/amavisd/amavisd-new-docs.html
-#
-# Section I - Essential daemon and MTA settings
-#
+# COMMONLY ADJUSTED SETTINGS:
-# $MYHOME serves as a quick default for some other configuration settings.
-# More refined control is available with each individual setting further down.
-# $MYHOME is not used directly by the program. No trailing slash!
-$MYHOME = '/var/amavis'; # (default is '/var/amavis'), -H
+# @bypass_virus_checks_maps = (1); # controls running of anti-virus code
+# @bypass_spam_checks_maps = (1); # controls running of anti-spam code
+# $bypass_decode_parts = 1; # controls running of decoders&dearchivers
-# $mydomain serves as a quick default for some other configuration settings.
-# More refined control is available with each individual setting further down.
-# $mydomain is never used directly by the program.
-$mydomain = 'brehm-online.com'; # (no useful default)
+$max_servers = 2; # num of pre-forked children (2..30 is common), -m
+$max_requests = 20; # retire a child after that many accepts (default 20)
-# $myhostname = 'host.example.com'; # fqdn of this host, default by uname(3)
-$myhostname = 'helga.brehm-online.com';
+$child_timeout=5*60; # abort child if it does not complete its processing in
+ # approximately n seconds (default: 8*60 seconds)
-# Set the user and group to which the daemon will change if started as root
-# (otherwise just keeps the UID unchanged, and these settings have no effect):
-$daemon_user = 'amavis'; # (no default; customary: vscan or amavis), -u
-$daemon_group = 'amavis'; # (no default; customary: vscan or amavis), -g
+$smtpd_timeout = 120; # disconnect session if client is idle for too long
+ # (default: 8*60 seconds); should be higher than a
+ # Postfix setting max_idle (default 100s)
-# Runtime working directory (cwd), and a place where
-# temporary directories for unpacking mail are created.
-# (no trailing slash, may be a scratch file system)
-#$TEMPBASE = $MYHOME; # (must be set if other config vars use is), -T
-$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
+$daemon_user = 'amavis'; # (no default; customary: vscan or amavis), -u
+$daemon_group = 'amavis'; # (no default; customary: vscan or amavis), -g
-#$db_home = "$MYHOME/db"; # DB databases directory, default "$MYHOME/db", -D
+$mydomain = 'brehm-online.com'; # a convenient default for other settings
-# $helpers_home sets environment variable HOME, and is passed as option
-# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
-# on a normal persistent file system, not a scratch or temporary file system
-#$helpers_home = $MYHOME; # (defaults to $MYHOME), -S
+# $MYHOME = '/var/amavis'; # a convenient default for other settings, -H
+$TEMPBASE = "$MYHOME/tmp"; # working directory, needs to exist, -T
+$ENV{TMPDIR} = $TEMPBASE; # environment variable TMPDIR, used by SA, etc.
+$QUARANTINEDIR = "$MYHOME/quarantine"; # -Q
+# $quarantine_subdir_levels = 1; # add level of subdirs to disperse quarantine
+# $release_format = 'resend'; # 'attach', 'plain', 'resend'
+# $report_format = 'arf'; # 'attach', 'plain', 'resend', 'arf'
-# Run the daemon in the specified chroot jail if nonempty:
-#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot), -R
+# $daemon_chroot_dir = $MYHOME; # chroot directory or undef, -R
-#$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid"), -P
-#$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock"), -L
+# $db_home = "$MYHOME/db"; # dir for bdb nanny/cache/snmp databases, -D
+# $helpers_home = "$MYHOME/var"; # working directory for SpamAssassin, -S
+# $lock_file = "$MYHOME/var/amavisd.lock"; # -L
+# $pid_file = "$MYHOME/var/amavisd.pid"; # -P
+#NOTE: create directories $MYHOME/tmp, $MYHOME/var, $MYHOME/db manually
-# set environment variables if you want (no defaults):
-$ENV{TMPDIR} = $TEMPBASE; # used for SA temporary files, by some decoders, etc.
+$log_level = 0; # verbosity 0..5, -d
+$log_recip_templ = undef; # disable by-recipient level-0 log entries
+$do_syslog = 1; # log via syslogd (preferred)
+$syslog_facility = 'mail'; # Syslog facility as a string
+ # e.g.: mail, daemon, user, local0, ... local7
$enable_db = 1; # enable use of BerkeleyDB/libdb (SNMP and nanny)
-$enable_global_cache = 1; # enable use of libdb-based cache if $enable_db=1
-
+$nanny_details_level = 2; # nanny verbosity: 1: traditional, 2: detailed
$enable_dkim_verification = 0; # enable DKIM signatures verification
$enable_dkim_signing = 0; # load DKIM signing code, keys defined by dkim_key
-# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
-# both $forward_method and $notify_method default to 'smtp:[127.0.0.1]:10025'
-
-# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
-# (set host and port number as required; host can be specified
-# as an IP address or a DNS name (A or CNAME, but MX is ignored)
-#$forward_method = 'smtp:[127.0.0.1]:10025'; # where to forward checked mail
-#$notify_method = $forward_method; # where to submit notifications
-
-#$os_fingerprint_method = 'p0f:127.0.0.1:2345'; # query p0f-analyzer.pl
-
-# To make it possible for several hosts to share one content checking daemon,
-# the IP address and/or the port number in $forward_method and $notify_method
-# may be spacified as an asterisk. An asterisk in the colon-separated
-# second field (host) will be replaced by the SMTP client peer address,
-# An asterisk in the third field (tcp port) will be replaced by the incoming
-# SMTP/LMTP session port number plus one. This obsoletes the previously used
-# less flexible configuration parameter $relayhost_is_client. An example:
-# $forward_method = 'smtp:*:*'; $notify_method = 'smtp:*:10587';
-
-
-# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
-# uncomment the appropriate settings below if using other setups!
-
-# SENDMAIL MILTER, using amavis-milter.c helper program:
-#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
-# milter; option -odd is needed to avoid deadlocks
-#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
-# just a thought: can we use use -Am instead of -odd ?
-
-# SENDMAIL (old non-milter setup, as relay, deprecated):
-#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
-#$notify_method = $forward_method;
-
-# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent, deprecated):
-#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
-#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
-
-# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
-#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
-#$notify_method = $forward_method;
-
-# COURIER using courierfilter
-#$forward_method = undef; # no explicit forwarding, Courier does it itself
-#$notify_method = 'pipe:flags=q argv=perl -e $pid=fork();if($pid==-1){exit(75)}elsif($pid==0){exec(@ARGV)}else{exit(0)} /usr/sbin/sendmail -f ${sender} -- ${recipient}';
-# Only set $courierfilter_shutdown to 1 if you are using courierfilter to
-# control the startup and shutdown of amavis
-#$courierfilter_shutdown = 1; # (default 0)
-
-# prefer to collect mail for forwarding as BSMTP files?
-#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
-#$notify_method = $forward_method;
-
@auth_mech_avail = qw(PLAIN LOGIN);
$auth_required_inp = 0;
$auth_required_out = 0;
-# Net::Server pre-forking settings
-# The $max_servers should match the width of your MTA pipe
-# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
-# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
-#
-$max_servers = 2; # num of pre-forked children (2..30 is common), -m
-$max_requests = 20; # retire a child after that many accepts (default 20)
-
-$child_timeout=5*60; # abort child if it does not complete its processing in
- # approximately n seconds (default: 8*60 seconds)
-
-$smtpd_timeout = 120; # disconnect session if client is idle for too long
- # (default: 8*60 seconds); should be higher than a
- # Postfix setting max_idle (default 100s)
-
-# Here is a QUICK WAY to completely DISABLE some sections of code
-# that WE DO NOT WANT (it won't even be compiled-in).
-# For more refined controls leave the following two lines commented out,
-# and see further down what these two lookup lists really mean.
-#
-# @bypass_virus_checks_maps = (1); # controls running of anti-virus code
-# @bypass_spam_checks_maps = (1); # controls running of anti-spam code
-# $bypass_decode_parts = 1; # controls running of decoders&dearchivers
-#
-# Any setting can be changed with a new assignment, so make sure
-# you do not unintentionally override these settings further down!
-
-# Check also the settings of @av_scanners at the end if you want to use
-# virus scanners. If not, you may want to delete the whole long assignment
-# to the variable @av_scanners and @av_scanners_backup, which will also
-# remove the virus checking code (e.g. if you only want to do spam scanning).
+@local_domains_maps = ( [".$mydomain"] ); # list of all local domains
+@mynetworks = qw( 127.0.0.0/8 [::1] [FE80::]/10 [FEC0::]/10
+ 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 );
-# Lookup list of local domains (see README.lookups for syntax details)
-#
-# @local_domains_maps is a list of lookup tables which are used in deciding
-# whether a recipient is local or not, or in other words, if the message is
-# outgoing or not. This affects inserting spam-related and OS fingerprinting
-# header fields for local recipients, editing Subject header field and allowing
-# mail body defanging, limiting recipient notifications to local recipients,
-# in deciding if address extension may be appended, in matching mail addresses
-# to non-fqdn SQL record keys, for proper operation of pen pals feature,
-# for selecting statistics counters (distinguishing outgoing from internal-
-# to internal mail), and possibly more in future versions.
-# Set it up correctly if you need features that rely on this setting.
-#
-# With Postfix (2.0) a quick hint on what local domains normally are:
-# a union of domains specified in: mydestination, virtual_alias_domains,
-# virtual_mailbox_domains, and relay_domains.
-
-@local_domains_maps = ( [".$mydomain"] ); # $mydomain and its subdomains
-# @local_domains_maps = (); # default is empty list, no recip. considered local
-# @local_domains_maps = # using ACL lookup table
-# ( [ ".$mydomain", 'sub.example.net', '.example.com' ] );
-# @local_domains_maps = # similar, split list elements on whitespace
-# ( [qw( .example.com !host.sub.example.net .sub.example.net )] );
-# @local_domains_maps = ( new_RE( qr'[@.]example\.com$'i ) ); # using regexp
-# @local_domains_maps = ( read_hash("$MYHOME/local_domains") ); # using hash
-# perhaps combined with Postfix: mydestination = /var/amavis/local_domains
-# for debugging purposes: dump_hash($local_domains_maps[0]);
-#
-# Section II - MTA specific (defaults should be ok)
-#
+$unix_socketname = "$MYHOME/amavisd.sock"; # amavisd-release or amavis-milter
+ # option(s) -p overrides $inet_socket_port and $unix_socketname
-#$insert_received_line = 1; # behave like MTA: insert 'Received:' header
- # (does not apply to sendmail/milter)
- # (default is true)
-
-# AMAVIS-CLIENT AND COURIER PROTOCOL INPUT SETTINGS (e.g. amavisd-release, or
-# sendmail milter through helper clients like amavis-milter.c and amavis.c)
-# option(s) -p overrides $inet_socket_port and $unix_socketname
-$unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
-#$unix_socketname = undef; # disable listening on a unix socket
- # (default is undef, i.e. disabled)
-#$unix_socketname = "/var/lib/courier/allfilters/amavisd"; # Courier socket
- # (usual setting is $MYHOME/amavisd.sock)
-
-# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
-# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
-$inet_socket_port = 10024; # accept SMTP on this local TCP port
- # (default is undef, i.e. disabled)
-# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
-
-# SMTP SERVER (INPUT) access control
-# - do not allow free access to the amavisd SMTP port !!!
-#
-# when MTA is at the same host, use the following (one or the other or both):
-#$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
- # (default is '127.0.0.1')
+$inet_socket_port = 10024; # listen on this local TCP port(s)
+# $inet_socket_port = [10024,10026]; # listen on multiple TCP ports
@inet_acl = qw(127.0.0.1 [::1]); # allow SMTP access only from localhost IP
# (default is qw(127.0.0.1 [::1]) )
-# when MTA (one or more) is on a different host, use the following:
-#@inet_acl = qw(127.0.0.0/8 [::1] 10.1.0.1 10.1.0.2); # adjust list as needed
-#$inet_socket_bind = undef; # bind to all IP interfaces if undef
+$policy_bank{'MYNETS'} = { # mail originating from @mynetworks
+ originating => 1, # is true in MYNETS by default, but let's make it explicit
+ os_fingerprint_method => undef, # don't query p0f for internal clients
+};
+
+# it is up to MTA to re-route mail from authenticated roaming users or
+# from internal hosts to a dedicated TCP port (such as 10026) for filtering
+$interface_policy{'10026'} = 'ORIGINATING';
+
+$policy_bank{'ORIGINATING'} = { # mail supposedly originating from our users
+ originating => 1, # declare that mail was submitted by our smtp client
+ allow_disclaimers => 1, # enables disclaimer insertion if available
+ # notify administrator of locally originating malware
+ virus_admin_maps => ["virusalert\@$mydomain"],
+ spam_admin_maps => ["virusalert\@$mydomain"],
+ warnbadhsender => 1,
+ # forward to a smtpd service providing DKIM signing service
+ forward_method => 'smtp:[127.0.0.1]:10027',
+ # force MTA conversion to 7-bit (e.g. before DKIM signing)
+ smtpd_discard_ehlo_keywords => ['8BITMIME'],
+ bypass_banned_checks_maps => [1], # allow sending any file names and types
+ terminate_dsn_on_notify_success => 0, # don't remove NOTIFY=SUCCESS option
+};
+
+$interface_policy{'SOCK'} = 'AM.PDP-SOCK'; # only applies with $unix_socketname
+
+# Use with amavis-release over a socket or with Petr Rehor's amavis-milter.c
+# (with amavis-milter.c from this package or old amavis.c client use 'AM.CL'):
+$policy_bank{'AM.PDP-SOCK'} = {
+ protocol => 'AM.PDP',
+ auth_required_release => 0, # do not require secret_id for amavisd-release
+};
+
+$sa_tag_level_deflt = 2.0; # add spam info headers if at, or above that level
+$sa_tag2_level_deflt = 6.2; # add 'spam detected' headers at that level
+$sa_kill_level_deflt = 6.9; # triggers spam evasive actions (e.g. blocks mail)
+$sa_dsn_cutoff_level = 10; # spam level beyond which a DSN is not sent
+$sa_crediblefrom_dsn_cutoff_level = 18; # likewise, but for a likely valid From
+# $sa_quarantine_cutoff_level = 25; # spam level beyond which quarantine is off
+$penpals_bonus_score = 8; # (no effect without a @storage_sql_dsn database)
+$penpals_threshold_high = $sa_kill_level_deflt; # don't waste time on hi spam
+$bounce_killer_score = 100; # spam score points to add for joe-jobbed bounces
-#
-# Example1:
-# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
-# permit only SMTP access from loopback and rfc1918 private address space
-#
-# Example2:
-# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
-# 127.0.0.1 10/8 172.16/12 192.168/16 );
-# matches loopback and rfc1918 private address space except host 192.168.1.12
-# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
-#
-# Example3:
-# @inet_acl = qw( 127/8
-# !172.16.3.0 !172.16.3.127 172.16.3.0/25
-# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
-# matches loopback and both halves of the 172.16.3/24 C-class,
-# split into two subnets, except all four broadcast addresses
-# for these subnets
-
-
-# @mynetworks is an IP access list which determines if the original SMTP client
-# IP address belongs to our internal networks, i.e. mail is coming from inside.
-# It is much like the Postfix parameter 'mynetworks' in semantics and similar
-# in syntax, and its value should normally match the Postfix counterpart.
-# It only affects the value of a macro %l (=sender-is-local),
-# and the loading of policy 'MYNETS' if present (see below).
-# Note that '-o smtp_send_xforward_command=yes' (or its lmtp counterpart)
-# must be enabled in the Postfix service that feeds amavisd, otherwise
-# client IP address is not available to amavisd-new.
-#
-# @mynetworks = qw( 127.0.0.0/8 [::1] [FE80::]/10 [FEC0::]/10
-# 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 ); # default
-#
-# A list of networks can also be read from a file, either as an IP acl in
-# CIDR notation, one address per line (comments and empty lines are allowed):
-# @mynetworks_maps = (read_array('/etc/amavisd-mynetworks'), \@mynetworks);
-#
-# or less flexibly (but provides faster lookups for large lists) by reading
-# into a hash lookup table, which only allows for full addresses or classful
-# IPv4 subnets with truncated octets, such as 127, 10, 192.168, 10.11.12.13,
-# one address per line (comments and empty lines are allowed):
-# @mynetworks_maps = (read_hash('/etc/amavisd-mynetworks'), \@mynetworks);
+$sa_mail_body_size_limit = 400*1024; # don't waste time on SA if mail is larger
+$sa_local_tests_only = 0; # only tests which do not require internet access?
-# See README.lookups for details on specifying access control lists.
+# @lookup_sql_dsn =
+# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
+# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'],
+# ["DBI:SQLite:dbname=$MYHOME/sql/mail_prefs.sqlite", '', ''] );
+# @storage_sql_dsn = @lookup_sql_dsn; # none, same, or separate database
+# $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
+# defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
-#
-# Section III - Logging
-#
+$virus_admin = "virusalert\@$mydomain"; # notifications recip.
-# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
-$DO_SYSLOG = 1; # (defaults to 0)
-
-$syslog_ident = 'amavis'; # Syslog ident string (defaults to 'amavis')
-$syslog_facility = 'mail'; # Syslog facility as a string
- # e.g.: mail, daemon, user, local0, ... local7, ...
-$syslog_priority = 'info'; # Syslog base (minimal) priority as a string,
- # choose from: emerg, alert, crit, err, warning, notice, info, debug
-
-# Log file (if not using syslog)
-$LOGFILE = "$MYHOME/amavis.log"; # (defaults to empty, no log)
-
-#NOTE: levels are not strictly observed and are somewhat arbitrary
-# 0: startup/exit/failure messages, viruses detected
-# 1: args passed from client, some more interesting messages
-# 2: virus scanner output, timing
-# 3: server, client
-# 4: decompose parts
-# 5: more debug details
-$log_level = 3; # (defaults to 0), -d
-
-# Customizable template for the most interesting log file entry (e.g. with
-# $log_level=0) (take care to properly quote Perl special characters like '\')
-# For a list of available macros see README.customize .
-
-# $log_templ = undef; # undef disables by-message level-0 log entries
-$log_recip_templ = undef; # undef disables by-recipient level-0 log entries
-
-
-# log both infected and noninfected messages (as deflt, with size,subj,tests):
-# (remove the leading '#' and a space in the following lines to activate)
-
-# $log_templ = <<'EOD';
-# [?%#D|#|Passed #
-# [? [:ccat|major] |OTHER|CLEAN|MTA-BLOCKED|OVERSIZED|BAD-HEADER|SPAMMY|SPAM|\
-# UNCHECKED|BANNED (%F)|INFECTED (%V)]#
-# , [? %p ||%p ][?%a||[?%l||LOCAL ]\[%a\] ][?%e||\[%e\] ]%s -> [%D|,]#
-# [? %q ||, quarantine: %q]#
-# [? %Q ||, Queue-ID: %Q]#
-# [? %m ||, Message-ID: %m]#
-# [? %r ||, Resent-Message-ID: %r]#
-# , mail_id: %i#
-# , Hits: [:SCORE]#
-# , size: %z#
-# [~[:remote_mta_smtp_response]|["^$"]||[", queued_as: "]]\
-# [remote_mta_smtp_response|[~%x|["queued as ([0-9A-Z]+)$"]|["%1"]|["%0"]]|/]#
-# [? [:header_field|Subject] ||, Subject: [:dquote|[:header_field|Subject]]]#
-# [? [:header_field|From] ||, From: [:uquote|[:header_field|From]]]#
-# [? [:useragent|name] ||, [:useragent|name]: [:uquote|[:useragent|body]]]#
-# [? %#T ||, Tests: \[[%T|,]\]]#
-# [:supplementary_info|SCTYPE|, shortcircuit=%%s]#
-# [:supplementary_info|AUTOLEARN|, autolearn=%%s]#
-# , %y ms#
-# ]
-# [?%#O|#|Blocked #
-# [? [:ccat|major|blocking] |#
-# OTHER|CLEAN|MTA-BLOCKED|OVERSIZED|BAD-HEADER|SPAMMY|SPAM|\
-# UNCHECKED|BANNED (%F)|INFECTED (%V)]#
-# , [? %p ||%p ][?%a||[?%l||LOCAL ]\[%a\] ][?%e||\[%e\] ]%s -> [%O|,]#
-# [? %q ||, quarantine: %q]#
-# [? %Q ||, Queue-ID: %Q]#
-# [? %m ||, Message-ID: %m]#
-# [? %r ||, Resent-Message-ID: %r]#
-# , mail_id: %i#
-# , Hits: [:SCORE]#
-# , size: %z#
-# #, smtp_resp: [:smtp_response]#
-# [? [:header_field|Subject] ||, Subject: [:dquote|[:header_field|Subject]]]#
-# [? [:header_field|From] ||, From: [:uquote|[:header_field|From]]]#
-# [? [:useragent|name] ||, [:useragent|name]: [:uquote|[:useragent|body]]]#
-# [? %#T ||, Tests: \[[%T|,]\]]#
-# [:supplementary_info|SCTYPE|, shortcircuit=%%s]#
-# [:supplementary_info|AUTOLEARN|, autolearn=%%s]#
-# , %y ms#
-# ]
-# EOD
+$mailfrom_notify_admin = "virusalert\@$mydomain"; # notifications sender
+$mailfrom_notify_recip = "virusalert\@$mydomain"; # notifications sender
+$mailfrom_notify_spamadmin = "spam.police\@$mydomain"; # notifications sender
+$mailfrom_to_quarantine = ''; # null return path; uses original sender if undef
-#
-# Section IV - Notifications/DSN, bounce/reject/discard/pass, quarantine
-#
+@addr_extension_virus_maps = ('virus');
+@addr_extension_banned_maps = ('banned');
+@addr_extension_spam_maps = ('spam');
+@addr_extension_bad_header_maps = ('badh');
+# $recipient_delimiter = '+'; # undef disables address extensions altogether
+# when enabling addr extensions do also Postfix/main.cf: recipient_delimiter=+
-# Select notifications text encoding when Unicode-aware Perl is converting
-# text from internal character representation to external encoding (charset
-# in MIME terminology). Used as argument to Perl Encode::encode subroutine.
-#
-# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
-#$hdr_encoding = 'iso-8859-1'; # MIME charset (default: 'iso-8859-1')
-#$hdr_encoding_qb = 'Q'; # MIME encoding: quoted-printable (default)
-#$hdr_encoding_qb = 'B'; # MIME encoding: base64
-#
-# to be used in notification body text: its encoding and Content-type.charset
-#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
-
-# Default template texts for notifications may be overruled by directly
-# assigning new text to template variables, or by reading template text
-# from files. A second argument may be specified in a call to read_text(),
-# specifying character encoding layer to be used when reading from the
-# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
-# Text will be converted to internal character representation by Perl 5.8.0
-# or later; second argument is ignored otherwise. See PerlIO::encoding,
-# Encode::PerlIO and perluniintro man pages.
-#
-# $notify_sender_templ = read_text("$MYHOME/notify_sender.txt");
-# $notify_virus_sender_templ= read_text("$MYHOME/notify_virus_sender.txt");
-# $notify_virus_admin_templ = read_text("$MYHOME/notify_virus_admin.txt");
-# $notify_virus_recips_templ= read_text("$MYHOME/notify_virus_recips.txt");
-# $notify_spam_sender_templ = read_text("$MYHOME/notify_spam_sender.txt");
-# $notify_spam_admin_templ = read_text("$MYHOME/notify_spam_admin.txt");
-
-# If notification template files are collectively available in some directory,
-# one may call read_l10n_templates which invokes read_text for each known
-# template. This is primarily a Debian-specific feature, but was incorporated
-# into base code to facilitate porting.
-#
-# read_l10n_templates('/etc/amavis/en_US');
-#
-# If read_l10n_templates is called, a localization template directory must
-# contain the following files:
-# charset this file should contain a one-line name
-# of the character set used in the template
-# files (e.g. utf8, iso-8859-2, ...) and is
-# passed as the second argument to read_text;
-# template-dsn.txt content fills the $notify_sender_templ
-# template-virus-sender.txt content fills the $notify_virus_sender_templ
-# template-virus-admin.txt content fills the $notify_virus_admin_templ
-# template-virus-recipient.txt content fills the $notify_virus_recips_templ
-# template-spam-sender.txt content fills the $notify_spam_sender_templ
-# template-spam-admin.txt content fills the $notify_spam_admin_templ
-
-# Here is an overall picture (sequence of events) of how pieces fit together
-#
-# bypass_virus_checks set for all recipients? ==> PASS
-# no viruses? ==> PASS
-# log virus if $log_templ is nonempty
-# quarantine if $virus_quarantine_to is nonempty
-# notify admin if $virus_admin (lookup) nonempty
-# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
-# add address extensions for local recipients (when enabled)
-# send (non-)delivery notifications
-# to sender if DSN needed (BOUNCE or ($warnvirussender and D_PASS))
-# virus_lovers or final_destiny==D_PASS ==> PASS
-# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
-#
-# Equivalent flow diagram applies for spam checks.
-# If a virus is detected, spam checking is skipped entirely.
+$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
+# $dspam = 'dspam';
-# The following symbolic constants can be used in *_destiny settings:
-#
-# D_PASS mail will pass to recipients, regardless of bad contents;
-#
-# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
-# notified. Effectively we lose mail (but will be quarantined
-# unless disabled). Losing mail is not decent for a mailer,
-# but might be desired.
-#
-# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
-# notification (bounce) will be sent to the sender by amavisd-new;
-# Exception: bounce (DSN) will not be sent if a virus name matches
-# @viruses_that_fake_sender_maps, or to messages from mailing lists
-# (Precedence: bulk|list|junk), or for spam level that exceeds
-# the $sa_dsn_cutoff_level.
-#
-# D_REJECT mail will not be delivered to its recipients, sender should
-# preferably get a reject, e.g. SMTP permanent reject response
-# (e.g. with milter), or non-delivery notification from MTA
-# (e.g. Postfix). If this is not possible (e.g. different recipients
-# have different tolerances to bad mail contents and not using LMTP)
-# amavisd-new sends a bounce by itself (same as D_BOUNCE).
-# Not to be used with Postfix or dual-MTA setups!
-#
-# Notes:
-# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
-# for informing the sender about non-delivery, and how informative
-# the notification can be (amavisd-new knows more than MTA);
-# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
-# notification, colloquially called 'bounce') - depending on MTA;
-# Best suited for sendmail milter and Courier, especially for spam.
-# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
-# reason for mail non-delivery or even suppress DSN, but unable
-# to reject the original SMTP session). Best suited to reporting
-# viruses, and for Postfix and other dual-MTA setups, which can't
-# reject original client SMTP session, as the mail has already
-# been enqueued.
-
-# Alternatives to consider for spam:
-# - use D_PASS if clients will do filtering based on inserted
-# mail headers or added address extensions ('plus-addressing');
-# - use D_DISCARD, if kill_level is set comfortably high;
-#
-# D_BOUNCE is preferred for viruses, but consider:
-# - use D_PASS (or virus_lovers) to deliver viruses;
-# - use D_REJECT instead of D_BOUNCE if using Courier or milter and under heavy
-# virus storm;
+$MAXLEVELS = 14;
+$MAXFILES = 1500;
+$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
+$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
+$sa_spam_subject_tag = '***Spam*** ';
+$defang_virus = 1; # MIME-wrap passed infected mail
+$defang_banned = 1; # MIME-wrap passed mail containing banned name
+# for defanging bad headers only turn on certain minor contents categories:
+$defang_by_ccat{CC_BADH.",3"} = 1; # NUL or CR character in header
+$defang_by_ccat{CC_BADH.",5"} = 1; # header line longer than 998 characters
+$defang_by_ccat{CC_BADH.",6"} = 1; # header field syntax error
-# The use of new *_by_ccat hashes is illustrated by the following examples
-# on configuring final_*_destiny.
+# OTHER MORE COMMON SETTINGS (defaults may suffice):
-# using traditional settings of $final_*_destiny variables, relying on a
-# default setting of an associative array %final_destiny_by_ccat which is
-# backwards compatible and contains references to these traditional variables:
-#
-$final_virus_destiny = D_REJECT; # (defaults to D_DISCARD)
-$final_banned_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_spam_destiny = D_REJECT; # (defaults to D_BOUNCE)
-$final_bad_header_destiny = D_PASS; # (defaults to D_PASS)
+# $myhostname = 'host.example.com'; # must be a fully-qualified domain name!
+$myhostname = 'helga.brehm-online.com';
-########
-#
-# Please think about what you are doing when you set these options.
-# If necessary, question your origanization's e-mail policies:
-#
-# D_BOUNCE contributes to the overall spread of virii and spam on the
-# internet. Both the envelope and header from addresses can be forged
-# accurately with no effort, causing the bounces to go to innocent parties,
-# whose addresses have been forged.
-#
-# D_DISCARD breaks internet mail specifications. However, with a
-# properly implemented Quaratine system, the concern for breaking the
-# specification is addressed to some extent.
-#
-# D_PASS is the safest way to handle e-mails. You must implement
-# client-side filtering to handle this method.
-#
-# -Cory Visi <merlin@gentoo.org> 07/28/04
-#
-#######
-
-# to explicitly list all (or most) possible contents category (ccat) keys:
-%final_destiny_by_ccat = (
- CC_VIRUS, D_DISCARD,
- CC_BANNED, D_BOUNCE,
- CC_UNCHECKED, D_PASS,
- CC_SPAM, D_DISCARD,
- CC_BADH, D_PASS,
- CC_OVERSIZED, D_BOUNCE,
- CC_CLEAN, D_PASS,
- CC_CATCHALL, D_PASS,
-);
+# $notify_method = 'smtp:[127.0.0.1]:10025';
+# $forward_method = 'smtp:[127.0.0.1]:10025'; # set to undef with milter!
-# to rely on a catchall ccat key and only list exceptions (alternative 1):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_BANNED, D_BOUNCE,
-# CC_SPAM, D_BOUNCE,
-# CC_BADH.',4', D_BOUNCE, # BadHdrSpace
-# CC_BADH.',3', D_BOUNCE, # BadHdrChar
-# CC_OVERSIZED, D_BOUNCE,
-# CC_CATCHALL, D_PASS,
-#);
-
-# to rely on a catchall ccat key and list exceptions (alternative 2):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_UNCHECKED, D_PASS,
-# CC_BADH.',6', D_PASS, # BadHdrSyntax
-# CC_BADH.',5', D_PASS, # BadHdrLong
-# CC_BADH.',2', D_PASS, # BadHdr8bit
-# CC_BADH.',1', D_PASS, # BadHdrMime
-# CC_CLEAN, D_PASS,
-# CC_CATCHALL, D_BOUNCE,
-#);
-
-# to rely on a catchall ccat key and list exceptions (alternative 3):
-#%final_destiny_by_ccat = (
-# CC_VIRUS, D_DISCARD,
-# CC_UNCHECKED, D_PASS,
-# CC_BADH.',4', D_BOUNCE, # BadHdrSpace
-# CC_BADH.',3', D_BOUNCE, # BadHdrChar
-# CC_BADH, D_PASS, # sub-catchall for CC_BADH
-# CC_CLEAN, D_PASS,
-# CC_CATCHALL, D_BOUNCE,
-#);
-
-# to rely on a default %final_destiny_by_ccat and only change few settings:
-#$final_destiny_by_ccat{+CC_SPAM} = D_PASS;
-#$final_destiny_by_ccat{+CC_BADH} = D_BOUNCE;
-#$final_destiny_by_ccat{+CC_BADH.',2'} = D_PASS; # BadHdr8bit
-
-
-
-# For monitoring / testing purposes let the administrator receive a copy
-# of certain delivery status notifications that are mailed back to senders:
-#
-#%dsn_bcc_by_ccat = (
-# CC_BANNED, undef,
-# CC_SPAM, undef,
-# CC_BADH, undef,
-# CC_CATCHALL, 'admin+test@example.com',
-#);
-#
-# or use a simpler form, taking advantage of defaults in %dsn_bcc_by_ccat:
-#$dsn_bcc = 'admin+test@example.com';
+# $final_virus_destiny = D_DISCARD;
+# $final_banned_destiny = D_DISCARD;
+# $final_spam_destiny = D_PASS; #!!! D_DISCARD / D_REJECT
+# $final_bad_header_destiny = D_PASS;
+# $bad_header_quarantine_method = undef;
+$final_virus_destiny = D_REJECT;
+$final_banned_destiny = D_REJECT;
+$final_spam_destiny = D_REJECT;
+$final_bad_header_destiny = D_PASS;
+# $os_fingerprint_method = 'p0f:*:2345'; # to query p0f-analyzer.pl
-# The following $warn*sender settings are ONLY used when mail is
-# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
-# Bounces or rejects produce non-delivery status notification regardless.
-#
-# Notify sender of syntactically invalid header containing non-ASCII chars?
-#$warnbadhsender = 1; # (defaults to false (undef))
-
-# Notify virus (or banned files or bad headers) RECIPIENT?
-# (not very useful, but some policies demand it)
-#$warnvirusrecip = 1; # (defaults to false (undef))
-#$warnbannedrecip = 1; # (defaults to false (undef))
-#$warnbadhrecip = 1; # (defaults to false (undef))
-
-# Notify also non-local virus/banned recipients if $warn*recip is true?
-# (including those not matching local_domains*)
-#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
-
-
-# Treat envelope sender address as unreliable and don't send sender
-# notification / bounces if name(s) of detected virus(es) match the list.
-# Note that virus names are supplied by external virus scanner(s) and are
-# not standardized, so virus names may need to be adjusted.
-# See README.lookups for syntax, check also README.policy-on-notifications.
-# If the intention is to treat all viruses as faking the sender address, it
-# is equivalent but more efficient to just set $final_virus_destiny=D_DISCARD;
-#
-@viruses_that_fake_sender_maps = (new_RE(
- qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i,
- qr'tanatos|lentin|bridex|mimail|trojan\.dropper|dumaru|parite|spaces'i,
- qr'dloader|galil|gibe|swen|netwatch|bics|sbrowse|sober|rox|val(hal)?la'i,
- qr'frethem|sircam|be?agle|tanx|mydoom|novarg|shimg|netsky|somefool|moodown'i,
- qr'@mm|@MM', # mass mailing viruses as labeled by f-prot and uvscan
- qr'Worm'i, # worms as labeled by ClamAV, Kaspersky, etc
-# [qr'^(EICAR|Joke\.|Junk\.)'i => 0],
-# [qr'^(WM97|OF97|W95/CIH-|JS/Fort)'i => 0],
- [qr/^/ => 1], # true by default (remove or comment-out if undesired)
-));
+## hierarchy by which a final setting is chosen:
+## policy bank (based on port or IP address) -> *_by_ccat
+## *_by_ccat (based on mail contents) -> *_maps
+## *_maps (based on recipient address) -> final configuration value
-# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
-# - the administrator envelope address may be a simple fixed e-mail address
-# (a scalar), or may depend on the RECIPIENT address (e.g. its domain).
-#
-# Empty or undef lookup disables virus admin notifications.
-
-# The full set of configurable administrator addresses is:
-# @virus_admin_maps ... notifications to admin about viruses
-# @newvirus_admin_maps ... newly encountered viruses since amavisd startup
-# @spam_admin_maps ... notifications to admin about spam
-# @banned_admin_maps ... notifications to admin about banned contents
-# @bad_header_admin_maps ... notifications to admin about bad headers
-
-$virus_admin = "virusalert\@$mydomain";
-# $virus_admin = 'virus-admin@example.com';
-# $virus_admin = undef; # do not send virus admin notifications (default)
-#
-#@virus_admin_maps = ( # by-recipient maps
-# {'not.example.com' => '',
-# '.' => 'virusalert@example.com'},
-# $virus_admin, # the usual default
-#);
-
-# equivalent to $virus_admin, but for spam admin notifications:
-# $spam_admin = "spamalert\@$mydomain";
-# $spam_admin = undef; # do not send spam admin notifications (default)
-#@spam_admin_maps = ( # by-recipient maps
-# {'not.example.com' => '',
-# '.' => 'spamalert@example.com'},
-# $spam_admin, # the usual default
-#);
-
-# receive a copy of all delivery status notifications sent;
-# useful for testing or monitoring
-#$dsn_bcc = "mailadmin\@$mydomain";
-
-#advanced example, using a hash lookup table and a scalar default,
-#lookup key is a recipient envelope address:
-#@virus_admin_maps = ( # by-recipient maps
-# { 'baduser@sub1.example.com' => 'HisBoss@sub1.example.com',
-# '.sub1.example.com' => 'virusalert@sub1.example.com',
-# '.sub2.example.com' => '', # don't send admin notifications
-# 'a.sub3.example.com' => 'abuse@sub3.example.com',
-# '.sub3.example.com' => 'virusalert@sub3.example.com',
-# '.example.com' => 'noc@example.com', # default for our virus senders
-# },
-# 'virusalert@hq.example.com', # catchall for the rest
-#);
-
-# sender envelope address, from which notification reports are sent from;
-# may be a null reverse path, or a fully qualified address:
-# (admin and recip sender addresses default to a null return path).
-# If using strings in double quotes, don't forget to quote @, i.e. \@
-#
-$mailfrom_notify_admin = "virusalert\@$mydomain";
-$mailfrom_notify_recip = "virusalert\@$mydomain";
-$mailfrom_notify_spamadmin = "spam.police\@$mydomain";
-
-# 'From' HEADER FIELD for sender and admin notifications.
-# This should be a replyable address, see rfc1894. Not to be confused
-# with $mailfrom_notify_sender, which is the envelope return address
-# and can be empty (null reverse path) according to rfc2821.
-#
-# The syntax of the 'From' header field is specified in rfc2822, section
-# '3.4. Address Specification'. Note in particular that display-name must be
-# a quoted-string if it contains any special characters like spaces and dots.
-#
-# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
-# $hdrfrom_notify_sender = 'amavisd-new <postmaster@example.com>';
-# $hdrfrom_notify_sender = '"Content-Filter Master" <postmaster@example.com>';
-# $hdrfrom_notify_admin = $mailfrom_notify_admin;
-# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
-# (default: "\"Content-filter at $myhostname\" <postmaster\@$myhostname>")
-
-# whom quarantined messages appear to be sent from (envelope sender);
-# keeps original sender if undef, or set it explicitly, default is undef
-$mailfrom_to_quarantine = ''; # override sender address with null return path
-
-
-# Location to put infected mail into: (applies to 'local:' quarantine method)
-# empty for not quarantining, may be a file (Unix-style mailbox),
-# or a directory (no trailing slash)
-# (the default value is undef, meaning no quarantine)
-#
-$QUARANTINEDIR = "$MYHOME/quarantine";
-
-#$quarantine_subdir_levels = 1; # add level of subdirs to disperse quarantine
-
-#$clean_quarantine_method = 'local:clean-%m'; # disabled by default
-#$virus_quarantine_method = 'local:virus-%m'; # default
-#$spam_quarantine_method = 'local:spam-%m.gz'; # default
-#$banned_files_quarantine_method = 'local:banned-%m'; # default
-#$bad_header_quarantine_method = 'local:badh-%m'; # default
-
-# Separate quarantine subdirectories virus, spam, banned and badh within
-# the directory $QUARANTINEDIR may be specified by the following settings
-# (the subdirectories need to exist - must be created manually):
-#$clean_quarantine_method = 'local:clean/%m';
-#$virus_quarantine_method = 'local:virus/%m';
-#$spam_quarantine_method = 'local:spam/%m.gz';
-#$banned_files_quarantine_method = 'local:banned/%m';
-#$bad_header_quarantine_method = 'local:badh/%m';
-#
-#use the 'bsmtp:' method as an alternative to the default 'local:'
-#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%m.bsmtp";
-#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%m.bsmtp";
-#
-#using the 'pipe:' method might be useful for some special purpose:
-#$mailfrom_to_quarantine = undef; # pass on the original sender address
-#$spam_quarantine_method = 'pipe:argv=/usr/bin/myscript.sh spam-%b ${sender}';
-#
-#using the 'sql:' method to store quarantined message to a SQL database:
-#$virus_quarantine_method = $spam_quarantine_method =
-# $banned_files_quarantine_method = $bad_header_quarantine_method = 'sql:';
-# Send copy of every mail to an archival mail address:
-#$archive_quarantine_method = $notify_method;
-#@archive_quarantine_to_maps = ( 'collector@example.com' );
+# SOME OTHER VARIABLES WORTH CONSIDERING (see amavisd.conf-default for all)
+# Add X-Virus-Scanned header field to mail?
+$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: 'X-Virus-Scanned')
-# When using the 'local:' quarantine method (default), the following applies:
-#
-# A finer control of quarantining is available through
-# variables $virus_quarantine_method/$spam_quarantine_method/
-# $banned_files_quarantine_method/$bad_header_quarantine_method.
-#
-# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
-# per-recipient lookup result from lookup tables @virus_quarantine_to_maps)
-# is/are interpreted as follows:
+# $warnbadhsender,
+# $warnvirusrecip, $warnbannedrecip, $warnbadhrecip, (or @warn*recip_maps)
#
-# VARIANT 1:
-# empty or undef disables quarantine;
+# @bypass_virus_checks_maps, @bypass_spam_checks_maps,
+# @bypass_banned_checks_maps, @bypass_header_checks_maps,
#
-# VARIANT 2:
-# a string NOT containing an '@';
-# amavisd will behave as a local delivery agent (LDA) and will quarantine
-# viruses to local files according to hash %local_delivery_aliases (pseudo
-# aliases map) - see subroutine mail_to_local_mailbox() for details.
-# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
-# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
+# @virus_lovers_maps, @spam_lovers_maps,
+# @banned_files_lovers_maps, @bad_header_lovers_maps,
#
-# * if $QUARANTINEDIR is a directory, each quarantined virus will go
-# to a separate file in the $QUARANTINEDIR directory (traditional
-# amavis style, similar to maildir mailbox format);
+# @blacklist_sender_maps, @score_sender_maps,
#
-# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
-# mailbox. All quarantined messages will be appended to this file.
-# Amavisd child process must obtain an exclusive lock on the file during
-# delivery, so this may be less efficient than using individual files
-# or forwarding to MTA, and it may not work across NFS or other non-local
-# file systems (but may be handy for pickup of quarantined files via IMAP
-# for example);
+# $clean_quarantine_method, $virus_quarantine_to, $banned_quarantine_to,
+# $bad_header_quarantine_to, $spam_quarantine_to,
#
-# VARIANT 3:
-# any email address (must contain '@').
-# The e-mail messages to be quarantined will be handed to MTA
-# for delivery to the specified address. If a recipient address local to MTA
-# is desired, you may leave the domain part empty, e.g. 'infected@', but the
-# '@' character must nevertheless be included to distinguish it from variant 2.
-#
-# This variant enables more refined delivery control made available by MTA
-# (e.g. its aliases file, other local delivery agents, dealing with
-# privileges and file locking when delivering to user's mailbox, nonlocal
-# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
-# will not be handed back to amavisd for checking, as this will cause a loop
-# (hopefully broken at some stage)! If this can be assured, notifications
-# will benefit too from not being unnecessarily virus-scanned.
-#
-# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
-# setup, but probably not safe with sendmail milter interface without tricks.
-
-# (default values are: virus-quarantine, banned-quarantine, spam-quarantine)
-
-$virus_quarantine_to = 'virus-quarantine'; # traditional local quarantine
-#$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
-#$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
-#$virus_quarantine_to = 'virus-quarantine@example.com'; # similar
-#$virus_quarantine_to = undef; # no quarantine
-#
-# lookup key is envelope recipient address:
-#@virus_quarantine_to_maps = ( # per-recip multiple quarantines
-# new_RE( [qr'^user@example\.com$'i => 'infected@'],
-# [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
-# [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'] ),
-# $virus_quarantine_to, # the usual default
-#);
-
-# similar for banned names and bad headers and spam (set to undef to disable)
-$banned_quarantine_to = 'banned-quarantine'; # local quarantine
-$bad_header_quarantine_to = 'bad-header-quarantine'; # local quarantine
-$spam_quarantine_to = 'spam-quarantine'; # local quarantine
-
-# or to a mailbox:
-#$spam_quarantine_to = "spam-quarantine\@$mydomain";
-#
-#@spam_quarantine_to_maps = ( # per-recip quarantines
-# new_RE( [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'] ),
-# $spam_quarantine_to, # the usual default
-#);
-
-
-# In addition to per-recip quarantine, a by-sender lookup is possible.
-# It is similar to $spam_quarantine_to, but the lookup key is the
-# envelope sender address:
-#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
-
+# $defang_bad_header, $defang_undecipherable, $defang_spam
-# Spam level beyond which quarantining is disabled (global value):
-#$sa_quarantine_cutoff_level = 20; # dflt: undef, which disables this feature
-#@spam_quarantine_cutoff_level_maps = ( # per-recip. quarantine cutoff levels
-# { 'user1@example.com' => 20.5,
-# 'postmaster@example.com' => 9999,
-# '.example.com' => 25 },
-# \$sa_quarantine_cutoff_level, # catchall default
-#);
+# REMAINING IMPORTANT VARIABLES ARE LISTED HERE BECAUSE OF LONGER ASSIGNMENTS
-
-# Add X-Virus-Scanned header field to mail?
-$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: 'X-Virus-Scanned')
-
-# Set to empty to add no header field # (dflt "$myproduct_name at $mydomain")
-# $X_HEADER_LINE = "$myproduct_name at $mydomain";
-# $X_HEADER_LINE = "by $myproduct_name using ClamAV at $mydomain";
-# $X_HEADER_LINE = "$myproduct_name $myversion_id ($myversion_date) at $mydomain";
-
-# a string to prepend to Subject (for local recipients only) if mail could
-# not be decoded or checked entirely, e.g. due to password-protected archives
-$undecipherable_subject_tag = '***UNCHECKED*** '; # undef disables it
-
-# MIME defanging wraps the entire original mail in a MIME container of type
-# 'Content-type: multipart/mixed', where the first part is a text/plain with
-# a short explanation, and the second part is a complete original mail,
-# enclosed in a 'Content-type: message/rfc822' MIME part.
-# Defanging is only done when enabled (selectively by malware type),
-# and mail is considered malware (virus/spam/...), and the malware is allowed
-# to pass (*_lovers or *_destiny=D_PASS)
-#
-$defang_virus = 1; # default is false: don't modify mail body
-$defang_banned = 1; # default is false: don't modify mail body
-# $defang_bad_header = 1; # default is false: don't modify mail body
-# $defang_undecipherable = 1; # default is false: don't modify mail body
-# $defang_spam = 1; # default is false: don't modify mail body
-
-# NOTE: setting the following variables to true may break mail signatures
-# (DKIM and DomainKeys) when verification is done after content filtering:
-# $remove_existing_x_scanned_headers, $remove_existing_x_scanned_headers,
-# and $allow_fixing_improper_header_folding (and defanging, described
-# elsewhere). This is rarely an issue, as mail signing should be done
-# after content filtering, and mail verification should preferably be done
-# before filtering or by SpamAssassin called from within amavisd, which
-# sees still-unmodified mail.
-#
-$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
- # (defaults to false)
-#$remove_existing_x_scanned_headers= 1; # remove existing X-Virus-Scanned
-#$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
-$remove_existing_spam_headers = 1; # remove existing spam headers if
- # spam scanning is enabled (default)
-#$allow_fixing_improper_header_folding = 1; # (default is true)
-
-# set $bypass_decode_parts to true if you only do spam scanning, or if you
-# have a good virus scanner that can deal with compression and recursively
-# unpacking archives by itself, and save amavisd the trouble.
-# Disabling decoding also causes banned_files checking NOT to see MIME types
-# and content classification types as provided by the file(1) utility.
-# It is a double-edged sword, make sure you know what you are doing!
-#
-#$bypass_decode_parts = 1; # (defaults to false)
-
-# don't trust this file type or corresponding unpacker for this file type,
-# keep both the original and the unpacked file for a virus checker to see
-# (lookup key is what file(1) utility returned):
-#
@keep_decoded_original_maps = (new_RE(
-# qr'^MAIL$', # retain full original message for virus checking (can be slow)
- qr'^MAIL-UNDECIPHERABLE$', # retain full mail if it contains undecipherables
+ qr'^MAIL$', # retain full original message for virus checking
+ qr'^MAIL-UNDECIPHERABLE$', # recheck full mail if it contains undecipherables
qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
-# qr'^Zip archive data', # don't trust Archive::Zip
+# qr'^Zip archive data', # don't trust Archive::Zip
));
-# Checking for banned MIME types and names. If any mail part matches,
-# the whole mail is rejected. Object $banned_filename_re provides a list
-# of Perl regular expressions to be matched against each part's:
-#
-# * Content-Type value (both declared and effective mime-type),
-# such as the possible security-risk content types
-# 'message/partial' and 'message/external-body', as specified in rfc2046
-# or 'application/x-msdownload' and 'application/x-msdos-program';
-#
-# * declared (recommended) file names as specified by MIME subfields
-# Content-Disposition.filename and Content-Type.name, both in their
-# raw (encoded) form and in rfc2047-decoded form if applicable
-# as well as (recommended) file names specified in archives;
-#
-# * file content type as guessed by 'file(1)' utility, mapped
-# (by @map_full_type_to_short_type_maps) into short type names such as
-# .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe-ms, ..., which always
-# starts with a dot. These short types are available unless
-# $bypass_decode_parts is true.
-#
-# All nodes (mail parts) of the fully recursively decoded mail and embedded
-# archives are checked, each node independently from remaining nodes.
-#
-# For each node all its ancestor nodes including itself are checked against
-# $banned_filename_re lookup list, top-down. The search for a node stops
-# at the first match, the right-hand side of the matching key determines
-# the result (true or false, absent right-hand side implies true, as explained
-# in README.lookups).
-#
-# Although repeatedly re-checking ancestor nodes may seem excessive, it gives
-# the opportunity to specify rules which make a particular node hide its
-# descendents, e.g. allow any name or file type within a .zip, even though
-# .exe files may otherwise not be allowed.
-#
-# Leave $banned_filename_re undefined to disable these checks
-# (giving an empty list to new_RE() will also always return false)
-
-# for $banned_namepath_re (a new-style of banned table) see amavisd.conf-sample
-
$banned_filename_re = new_RE(
### BLOCKED ANYWHERE
# qr'^UNDECIPHERABLE$', # is or contains any undecipherable components
qr'^\.(exe-ms|dll)$', # banned file(1) types, rudimentary
-# qr'^\.(exe|lha|tnef|cab|dll)$', # banned file(1) types
+# qr'^\.(exe|lha|cab|dll)$', # banned file(1) types
### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
# [ qr'^\.(gz|bz2)$' => 0 ], # allow any in gzip or bzip2
# qr'^\.wmf$', # Windows Metafile file(1) type
# block certain double extensions in filenames
- qr'\.[^./]*[A-Za-z][^./]*\.\s*(exe|vbs|pif|scr|bat|cmd|com|cpl|dll)[.\s]*$'i,
+ qr'^(?!cid:).*\.[^./]*[A-Za-z][^./]*\.\s*(exe|vbs|pif|scr|bat|cmd|com|cpl|dll)[.\s]*$'i,
# qr'\{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?'i, # Class ID CLSID, strict
# qr'\{[0-9a-z]{4,}(-[0-9a-z]{4,}){0,7}\}?'i, # Class ID extension CLSID, loose
qr'.\.(exe|vbs|pif|scr|cpl)$'i, # banned extension - basic
# qr'.\.(exe|vbs|pif|scr|cpl|bat|cmd|com)$'i, # banned extension - basic+cmd
# qr'.\.(ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ins|isp|js|jse|lnk|mda|mdb|mde|mdw|mdt|mdz|msc|msi|msp|mst|
-# ops|pcd|pif|prg|reg|scr|sct|shb|shs|vb|vbe|vbs|
-# wmf|wsc|wsf|wsh)$'ix, # banned ext - long
+# inf|ini|ins|isp|js|jse|lib|lnk|mda|mdb|mde|mdt|mdw|mdz|msc|msi|
+# msp|mst|ocx|ops|pcd|pif|prg|reg|scr|sct|shb|shs|sys|vb|vbe|vbs|vxd|
+# wmf|wsc|wsf|wsh)$'ix, # banned extensions - long
+# qr'.\.(asd|asf|asx|url|vcs|wmd|wmz)$'i, # consider also
# qr'.\.(ani|cur|ico)$'i, # banned cursors and icons filename
# qr'^\.ani$', # banned animated cursor file(1) type
-
# qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
);
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
# and http://www.cknow.com/vtutor/vtextensions.htm
-# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
-# as well as any file name which happens to end with .exe. If only matching
-# a file name is desired, but not the short type, a pattern qr'.\.exe$'i
-# or similar may be used, which requires that at least one character precedes
-# the '.exe', and so it will never match short file types which always start
-# with a dot.
-
-
-# the syntax of these Perl regular expressions is a bit awkward if not
-# familiar with them, so please do follow examples and stick to the idioms:
-# \A ... at the beginning of the first component
-# \z ... at the end of the the last (leaf) component
-# ^ ... at the beginning of each component in the path
-# $ ... at the end of each component in the path
-# (.*\t)? ... at the beginning of a field
-# (\t.*)? ... at the end of a field
-# \t(.*\t)* ... separating fields
-# [^\t\n] ... any single character, but don't escape from this field
-# (.*\n)+ ... one or more levels down
-# (?#...) ... a comment within a regexp
-
-# new-style of banned lookup table
-$banned_namepath_re = new_RE(
-
-### BLOCKED ANYWHERE
-
- qr'(?# BLOCK Microsoft EXECUTABLES and DLL )
- ^ (.*\t)? T=(exe-ms|dll) (\t.*)? $'xm, # banned file(1) types, rudimentary
-
-# qr'(?# BLOCK ANY EXECUTABLE )
-# ^ (.*\t)? T=exe (\t.*)? $'xm, # banned file(1) type
-
-# qr'(?# BLOCK THESE TYPES )
-# ^ (.*\t)? T=(exe|lha|tnef|cab|dll) (\t.*)? $'xm, # banned file(1) types
-
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
-
-# # within traditional gzip and bzip2 allow any name and type
-# [ qr'(?#rule-3) ^ (.*\t)? T=(gz|bz2) (\t.*)? $'xmi => 0 ], # allow
-
- # within traditional Unix archives allow any name and type
- [ qr'(?#rule-4) ^ (.*\t)? T=(tar|rpm|cpio) (\t.*)? $'xmi => 0 ], # allow
-
- # banned filename extensions (in declared names) anywhere - rudimentary
- qr'(?# BLOCK COMMON NAME EXENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. (pif|scr) (\t.*)? $'xmi,
-
-# # block anything within a zip
-# qr'(?#rule-5) ^ (.*\t)? T=zip (\t.*)? (.*\n)+ .* $'xmi,
-
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN ARCHIVES OR CRYPTED:
-
-# # within PC archives allow any types or names at any depth
-# [ qr'(?#rule-7) ^ (.*\t)? T=(zip|rar|arc|arj|zoo) (\t.*)? $'xmi => 0 ], # ok
-
-# # within certain archives allow leaf members at any depth if crypted
-# [ qr'(?# ALLOW ENCRYPTED )
-# ^ (.*\t)? T=(zip|rar|arj) (.*\n)+ (.*\t)? A=C (\t.*)? \z'xmi => 0 ],
-
-# # allow crypted leaf members regardless of their name or type
-# [ qr'(?# ALLOW IF ENCRYPTED ) ^ (.*\t)? A=C (\t.*)? \z'xmi => 0 ],
-
- # block these MIME types
- qr'(?#NO X-MSDOWNLOAD) ^(.*\t)? M=application/x-msdownload (\t.*)? $'xmi,
- qr'(?#NO X-MSDOS-PROGRAM)^(.*\t)? M=application/x-msdos-program(\t.*)? $'xmi,
- qr'(?#NO HTA) ^(.*\t)? M=application/hta (\t.*)? $'xmi,
-
-# # block rfc2046 MIME types
-# qr'(?# BLOCK RFC2046 ) ^ (.*\t)? M=message/partial (\t.*)? $'xmi,
-# qr'(?# BLOCK RFC2046 ) ^ (.*\t)? M=message/external-body (\t.*)? $'xmi,
-
-# qr'(?#No Metafile MIME) ^(.*\t)? M=application/x-msmetafile (\t.*)? $'xmi,
-# qr'(?#No Metafile MIME) ^(.*\t)? M=image/x-wmf (\t.*)? $'xmi,
-# qr'(?#No Metafile file) ^(.*\t)? T=wmf (\t.*)? $'xm,
-# qr'(?#No animated cursors) ^(.*\t)? T=ani (\t.*)? $'xm,
-
- # block certain double extensions in filenames
- qr'(?# BLOCK DOUBLE-EXTENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. [^./\t\n]* [A-Za-z] [^./\t\n]* \. \ *
- (exe|vbs|pif|scr|bat|cmd|com|cpl|dll) [. ]* (\t.*)? $'xmi,
-
- [ qr'(?# BLOCK EMPTY MIME PART APPLICATION/OCTET-STREAM )
- ^ (.*\t)? M=application/(octet-stream|x-msdownload|x-msdos-program)
- \t(.*\t)* T=empty (\t.*)? $'xmi
- => 'DISCARD' ],
-
-# [ qr'(?# BLOCK EMPTY MIME PARTS )
-# ^ (.*\t)? M= [^\t\n]+ \t(.*\t)* T=empty (\t.*)? $'xmi => 'DISCARD' ],
-
-# # block Class ID (CLSID) extensions in filenames, strict
-# qr'(?# BLOCK CLSID-EXTENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?
-# [^\t\n]* (\t.*)? $'xmi,
-
-# # banned suggested names with three or more consecutive spaces
-# qr'(?# BLOCK NAMES WITH SPACES )
-# ^ (.*\t)? N= [^\t\n]* [ ]{3,} 'xmi,
-
-# # block if any component can not be decoded (is encrypted or bad archive)
-# qr'(?# BLOCK IF UNDECIPHERABLE ) ^ (.*\t)? A=U (\t.*)? \z'xmi,
-
-# [ qr'(?# SPECIAL ALLOWANCES - MAGIC NAMES)
-# \A (.*\t)? T=(rpm|cpio|tar|zip|rar|arc|arj|zoo|Z|gz|bz2)
-# \t(.*\t)* N=example\d+[^\t\n]*
-# (\t.*)? $'xmi => 0 ],
-
- # banned filename extensions (in suggested names) anywhere - basic
- qr'(?# BLOCK COMMON NAME EXENSIONS )
- ^ (.*\t)? N= [^\t\n]* \. (exe|vbs|pif|scr|cpl) (\t.*)? $'xmi,
-
-# # banned filename extensions (in suggested names) anywhere - basic+cmd
-# qr'(?# BLOCK COMMON NAME EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (exe|vbs|pif|scr|cpl|bat|cmd|com) (\t.*)? $'xmi,
-
-# # banned filename extensions (in suggested names) anywhere - long
-# qr'(?# BLOCK MORE NAME EXTENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (
-# ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ins|isp|js|jse|lnk|mda|mdb|mde|mdw|mdt|mdz|msc|msi|msp|mst|
-# ops|pcd|pif|prg|reg|scr|sct|shb|shs|vb|vbe|vbs|
-# wmf|wsc|wsf|wsh) (\t.*)? $'xmi,
-
-# qr'(?# BLOCK CURSOR AND ICON NAME EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (ani|cur|ico) (\t.*)? $'xmi,
-
-# # banned filename extensions anywhere - WinZip vulnerability (pre-V9)
-# qr'(?# BLOCK WinZip VULNERABILITY EXENSIONS )
-# ^ (.*\t)? N= [^\t\n]* \. (mim|b64|bhx|hqx|xxe|uu|uue) (\t.*)? $'xmi,
-
-);
-
-# use old or new style of banned lookup table; not both to avoid confusion
-#
-# @banned_filename_maps = (); # to disable old-style
- $banned_namepath_re = undef; # to disable new-style
-
-
-%banned_rules = (
- 'MYNETS-DEFAULT' => new_RE( # permissive set of rules for internal hosts
- [ qr'^\.(rpm|cpio|tar)$' => 0 ], # allow any name/type in Unix archives
- qr'.\.(vbs|pif|scr)$'i, # banned extension - rudimentary
- ),
- 'DEFAULT' => $banned_filename_re,
-);
-
-
-#
-# Section V - Per-recipient and per-sender handling, whitelisting, etc.
-#
-
-# @virus_lovers_maps list of lookup tables:
-# (this should be considered a policy option, is does not disable checks,
-# see bypass*checks for that!)
-#
-# Exclude certain RECIPIENTS from virus filtering by adding their (lower-cased)
-# envelope e-mail address (or domain only) to one of the lookup tables in
-# the @virus_lovers_maps list - see README.lookups and examples.
-# Make sure the appropriate form (e.g. external/internal) of address
-# is used in case of virtual domains, or when mapping external to internal
-# addresses, etc. - this is MTA-specific.
-#
-# Notifications would still be generated however (see the overall
-# picture above), and infected mail (if passed) gets additional header:
-# X-AMaViS-Alert: INFECTED, message contains virus: ...
-# (header not inserted with Courier or milter interface!)
-#
-# Setting $final_*_destiny=D_PASS is functionally equivalent to having
-# all recipients match the @*_lovers_maps.
-#
-# NOTE (milter interface only): in case of multiple recipients,
-# it is only possible to drop or accept the message in its entirety - for all
-# recipients. If all of them are virus lovers, we'll accept mail, but if
-# at least one recipient is not a virus lover, we'll discard the message.
-
-
-# @bypass_virus_checks_maps list of lookup tables:
-# (this is mainly a time-saving option, unlike virus_lovers* !)
-#
-# Similar in concept to @virus_lovers_maps, a @bypass_virus_checks_maps
-# is used to skip entirely the decoding, unpacking and virus checking,
-# but only if ALL recipients match the lookup.
-#
-# @bypass_virus_checks_maps does NOT GUARANTEE the message will NOT be checked
-# for viruses - this may still happen when there is more than one recipient
-# for a message and not all of them match these lookup tables, or when
-# check result was cached (i.e. the same contents was recently sent to other
-# recipients). To guarantee virus delivery, a recipient must also match
-# @virus_lovers_maps lookups (but see milter limitations above),
-#
-# The following table summarizes the possible combinations:
-# bypass lover
-# 0 0 useful, check for malware and block it
-# 0 1 useful, check but deliver nevertheless, possibly tagged
-# 1 0 not too useful, free riding on cached or other-people's checks
-# 1 1 useful, no checks if possible, and no effects
-
-# NOTE: it would not be clever to base enabling of virus checks on SENDER
-# address, since there are no guarantees that it is genuine. Many viruses
-# and spam messages fake sender address. To achieve selective filtering
-# based on the source of the mail (e.g. IP address, MTA port number, ...),
-# use mechanisms provided by MTA if available, possibly combined with policy
-# banks feature.
-
-# Similar to lists of lookup tables controlling virus checking, there are
-# counterparts for spam scanning, banned names/types, and headers_checks
-# control:
-# @spam_lovers_maps,
-# @banned_files_lovers_maps,
-# @bad_header_lovers_maps
-# and:
-# @bypass_spam_checks_maps,
-# @bypass_banned_checks_maps,
-# @bypass_header_checks_maps
-
-# Example:
-# @bypass_header_checks_maps = ( [qw( user@example.com )] );
-# @bad_header_lovers_maps = ( [qw( user@example.com )] );
-
-# The following example disables spam checking altogether,
-# since it matches any recipient e-mail address.
-# @bypass_spam_checks_maps = (1);
-
-
-# See README.lookups for further detail, and examples below.
-
-# In the following example a list of lookup tables @virus_lovers_maps
-# contains three elements, the first is a reference to an ACL lookup table
-# (brackets in Perl indicate a ref to a list), the second is a reference
-# to a hash lookup table (curly braces in Perl indicate a ref to a hash),
-# the third is a regexp lookup table, indicated by the type of object
-# created by new_RE() :
-#
-#@virus_lovers_maps = (
-# [ qw( me@lab.xxx.com !lab.xxx.com .xxx.com yyy.org ) ],
-# { "postmaster\@$mydomain" => 1, # double quotes permit variable evaluation
-# 'postmaster@example.com'=> 1, # in single quotes the '@' need not be quoted
-# 'abuse@example.com'=> 1,
-# 'some.user@' => 1, # this recipient, regardless of domain
-# 'boss@example.com' => 0, # never, even if domain matches
-# 'example.com' => 1, # this domain, but not its subdomains
-# '.example.com' => 1, # this domain, including its subdomains
-# },
-# new_RE( qr'^(helpdesk|postmaster)@example\.com$'i ),
-#);
-
-#@spam_lovers_maps = (
-# ["postmaster\@$mydomain", 'postmaster@example.com', 'abuse@example.com'],
-#);
-
-#@bad_header_lovers_maps = (
-# ["postmaster\@", "abuse\@$mydomain"],
-#);
-
-
-# as an alternative to fiddling with @_lovers_maps and similar _maps, here
-# is an illustration of using a more general *_by_ccat associative array,
-# introduced with 2.4.0, like %lovers_maps_by_ccat in this example:
-#
-#$lovers_maps_by_ccat{+CC_SPAM} = [
-# read_hash("$MYHOME/etc/spam_lovers.txt"),
-# [qw(postmaster@example.com abuse@example.com)],
-#];
-#
-#$lovers_maps_by_ccat{+CC_BANNED} = [
-# { map {lc $_ => 1} # construct a hash lookup table from a list
-# qw(user1@example.com user2.example.com)
-# },
-#];
-
-
-# to save some typing of quotes and commas, a Perl operator qw can be used
-# to split its argument on whitespace and to quote resulting elements:
-#@bypass_spam_checks_maps = (
-# [ qw( some.ddd !butnot.example.com .example.com ) ],
-#);
-
-
-# don't run spam check for these RECIPIENT domains:
-# @bypass_spam_checks_maps = ( [qw( d1.com .d2.com a.d3.com )] );
-# or the other way around (bypass check for all BUT these):
-# @bypass_spam_checks_maps = ( [qw( !d1.com !.d2.com !a.d3.com . )] );
-# a practical application: don't check outgoing mail for spam:
-# @bypass_spam_checks_maps = ( [ "!.$mydomain", "." ] );
-# or calculated (negated) from the %local_domains:
-# @bypass_spam_checks_maps =
-# ( {map {$_ => !$local_domains{$_}} keys %local_domains}, 1);
-# (a downside of which is that such mail will not count as ham in SA bayes db)
-#
-# Note that 'outgoing' is not the same as 'originating from inside'. We refer
-# to 'outgoing' here as 'mail addressed to recipients outside our domain(s)'.
-# The internal-to-internal mail is not outgoing, but is still originating from
-# inside. To base rules on 'originating from inside', the use of a policy bank
-# with 'originating => 1' is needed (such as MYNETS), in conjunction with
-# XFORWARD Postfix extension to SMTP.
-
-# Where to find SQL server(s) and database to support SQL lookups?
-# A list of triples: (dsn,user,passw). (dsn = data source name)
-# More than one entry may be specified for multiple (backup) SQL servers.
-# See 'man DBI', 'man DBD::mysql', 'man DBD::Pg', ... for details.
-# When chroot-ed, accessing SQL server over inet socket may be more convenient.
-#
-# @lookup_sql_dsn =
-# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
-# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'],
-# ["DBI:SQLite:dbname=$MYHOME/sql/mail_prefs.sqlite", '', ''] );
-# @storage_sql_dsn = @lookup_sql_dsn; # none, same, or separate database
-#
-# ('mail' in the example is the database name, choose what you like)
-# With PostgreSQL the dsn (first element of the triple) may look like:
-# 'DBI:Pg:dbname=mail;host=host1'
-
-# The SQL select clause to fetch per-recipient policy settings.
-# The %k will be replaced by a comma-separated list of query addresses
-# (e.g. full address, domain only (stripped level by level), and a catchall).
-# Use ORDER if there is a chance that multiple records will match - the first
-# match wins. If field names are not unique (e.g. 'id'), the later field
-# overwrites the earlier in a hash returned by lookup, which is why we use
-# '*,users.id' instead of just '*'. No need to uncomment the following
-# assignment if the default is ok.
-# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
-# ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
-# ' ORDER BY users.priority DESC';
-#
-# The SQL select clause to check sender in per-recipient whitelist/blacklist
-# The first SELECT argument '?' will be users.id from recipient SQL lookup,
-# the %k will be sender addresses (e.g. full address, domain only, catchall).
-# The default value is:
-# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
-# ' WHERE (wblist.rid=?) AND (wblist.sid=mailaddr.id)'.
-# ' AND (mailaddr.email IN (%k))'.
-# ' ORDER BY mailaddr.priority DESC';
-#
-# To disable SQL white/black list, set to undef (otherwise comment-out
-# the following statement, leaving it at the default value):
-$sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
-
-# Controls the format of timestamps in the field msgs.time_iso:
-# $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
-# defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
-
-# Does a database mail address field with no '@' character represent a
-# local username or a domain name? By default it implies a username in
-# SQL and LDAP lookups (but represents a domain in hash and acl lookups),
-# so domain names in SQL and LDAP should be specified as '@domain'.
-# Setting these to true will cause 'xxx' to be interpreted as a domain
-# name, just like in hash or acl lookups.
-#
-# $sql_lookups_no_at_means_domain = 0; # default is 0
-# $ldap_lookups_no_at_means_domain = 0; # default is 0
-
-# Here is an example of a SELECT clause that fabricates an artificial 'users'
-# table from actual table 'postfix_domains' containing a field 'domain_name'.
-# The effect is that domains listed in the 'postfix_domains' table will be
-# treated as local by amavisd, and be given settings from a policy id 99
-# if such a policy id exists, or just fall back to static lookups.
-# The user.id (with a value 1) is there only to provide a user id (same id
-# for all listed domains) when global SQL-based white/blacklisting is used.
-#
-# $sql_lookups_no_at_means_domain = 1;
-# $sql_select_policy =
-# 'SELECT *, user.id'.
-# ' FROM (SELECT 1 as id, 99 as policy_id, "Y" AS local'.
-# ' FROM postfix_domains WHERE domain_name IN (%k)) AS user'.
-# ' LEFT JOIN policy ON policy_id=policy.id';
-
-# If passing malware to certain recipients ($final_*_destiny=D_PASS or
-# *_lovers), the recipient-based lookup tables @addr_extension_*_maps may
-# return a string, which (if nonempty) will be added as an address extension
-# to the local-part of the recipient's address. This extension may be used
-# by the final local delivery agent (LDA) to place such mail into different
-# subfolders (the extension is usually interpreted as a folder name).
-# This is sometimes known as the 'plus addressing'. Appending address
-# extensions is prevented when:
-# - recipient does not match lookup tables @local_domains_maps;
-# - lookup into corresponding @addr_extension_*_maps results
-# in an empty string or undef;
-# - $recipient_delimiter is empty (see below)
-# LDAs usually default to stripping away address extension if no special
-# handling is specified or if a named subfolder or alias does not exist,
-# so adding address extensions normally does no harm.
-
-# @addr_extension_virus_maps = ('virus'); # defaults to empty
-# @addr_extension_spam_maps = ('spam'); # defaults to empty
-# @addr_extension_banned_maps = ('banned'); # defaults to empty
-# @addr_extension_bad_header_maps = ('badh'); # defaults to empty
-#
-# A more complex example:
-# @addr_extension_virus_maps = (
-# {'sub.example.com'=>'infected', '.example.com'=>'filtered'}, 'virus' );
-
-# Delimiter between local part of the envelope recipient address and address
-# extension (which can optionally be added, see @addr_extension_*_maps. E.g.
-# recipient address <user@example.com> is changed to <user+virus@example.com>.
-#
-# Delimiter must match the equivalent (final) MTA delimiter setting.
-# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
-# Setting it to an empty string or to undef disables adding extensions
-# regardless of $addr_extension_*_maps.
-
-# $recipient_delimiter = '+'; # (default is undef, i.e. disabled)
-
-# true: replace extension; false: append extension
-# $replace_existing_extension = 1; # (default is true)
-
-# Affects matching of localpart of e-mail addresses (left of '@')
-# in lookups: true = case sensitive, false = case insensitive
-$localpart_is_case_sensitive = 0; # (default is false)
-
# ENVELOPE SENDER SOFT-WHITELISTING / SOFT-BLACKLISTING
-# Instead of hard black- or whitelisting, a softer approach is to add
-# score points (penalties) to the SA score for mail from certain senders.
-# Positive points lean towards blacklisting, negative towards whitelisting.
-# This is much like adding SA rules or using its white/blacklisting, except
-# that here only envelope sender addresses are considered (not addresses
-# in a mail header), and that score points can be assigned per-recipient
-# (or globally), and the assigned penalties are customarily much lower
-# than the default SA white/blacklisting score.
-#
-# The table structure is similar to $per_recip_blacklist_sender_lookup_tables
-# i.e. the first level key is recipient, pointing to by-sender lookup tables.
-# The essential difference is that scores from _all_ matching by-recipient
-# lookups (not just the first that matches) are summed to give the final
-# score boost. That means that both the site and domain administrators,
-# as well as the recipient can have a say on the final score.
-#
-# NOTE: keep hash keys in lowercase, either manually or by using function lc
+@score_sender_maps = ({ # a by-recipient hash lookup table,
+ # results from all matching recipient tables are summed
-@score_sender_maps = ({ # a by-recipient hash lookup table
-
-# # per-recipient personal tables (NOTE: positive: black, negative: white)
+# ## per-recipient personal tables (NOTE: positive: black, negative: white)
# 'user1@example.com' => [{'bla-mobile.press@example.com' => 10.0}],
# 'user3@example.com' => [{'.ebay.com' => -3.0}],
# 'user4@example.com' => [{'cleargreen@cleargreen.com' => -7.0,
# '.cleargreen.com' => -5.0}],
- # site-wide opinions about senders (the '.' matches any recipient)
+ ## site-wide opinions about senders (the '.' matches any recipient)
'.' => [ # the _first_ matching sender determines the score boost
new_RE( # regexp-type lookup table, just happens to be all soft-blacklist
[qr'^(stockalert|stopsnoring|wantsome|workathome|yesitsfree)@'i => 5.0],
[qr'^(your_friend|greatoffers)@'i => 5.0],
[qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i => 5.0],
- [ qr'@strato(?:-rz)\.de$'i => -5.0 ],
- [ qr'^Doris\.Hennig@BA-MH\.Verwalt-Berlin\.de$'i => -5.0 ],
- [ qr'^doris@hennig-berlin\.org$'i => -5.0 ],
+ [qr'@strato(?:-rz)\.de$'i => -5.0 ],
+ [qr'^Doris\.Hennig@BA-MH\.Verwalt-Berlin\.de$'i => -5.0 ],
+ [qr'^doris@hennig-berlin\.org$'i => -5.0 ],
),
# read_hash("/var/amavis/sender_scores_sitewide"),
});
-# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
-# (affects spam checking only, has no effect on virus and other checks)
-
-# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
-# senders even if the message would be recognized as spam. Effectively, for
-# the specified senders, message recipients temporarily become 'spam_lovers'.
-# To avoid surprises, whitelisted sender also suppresses inserting/editing
-# the tag2-level header fields (X-Spam-*, Subject), appending spam address
-# extension, and quarantining.
-#
-# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
-# Effectively, for messages from blacklisted envelope sender addresses, spam
-# level is artificially pushed high, and the normal spam processing applies,
-# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
-# reactions to spam, including possible rejection. If the message nevertheless
-# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
-# in the 'X-Spam-Status' header field, but the reported spam value and
-# set of tests in this report header field (if available from SpamAssassin,
-# which may or may not have been called) is not adjusted.
-#
-# A sender may be both white- and blacklisted at the same time, settings
-# are independent. For example, being both white- and blacklisted, message
-# is delivered to recipients, but is not tagged as spam (X-Spam-Flag: No;
-# X-Spam-Status: No, ...), but the reported spam level (if computed) may
-# still indicate high spam score.
-#
-# If ALL recipients of the message either white- or blacklist the sender,
-# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
-#
-# The following variables (lists of lookup tables) are available,
-# with the semantics and syntax as specified in README.lookups:
-# @whitelist_sender_maps, @blacklist_sender_maps
-
-# SOME EXAMPLES:
-#
-#ACL:
-# @whitelist_sender_maps = ( ['.example.org', '.example.net'] );
-# @whitelist_sender_maps = ( [qw(.example.org .example.net)] ); # same thing
-#
-# @whitelist_sender_maps = ( [".$mydomain"] ); # $mydomain and its subdomains
-# NOTE: This is not a reliable way of turning off spam checks for
-# locally-originating mail, as sender address can easily be faked.
-# To reliably avoid spam-scanning outgoing mail, use @bypass_spam_checks_maps
-# for nonlocal recipients. To reliably avoid spam scanning for locally
-# originating mail (including internal-to-internal mail), recognized by
-# the original SMTP client IP address matching @mynetworks, use policy bank
-# MYNETS, adjust @mynetworks, and turn on XFORWARD in the Postfix smtp client
-# service feeding amavisd.
-
-#with regexps:
-# @whitelist_sender_maps = ( new_RE(
-# qr'^postmaster@.*\bexample\.com$'i,
-# qr'^owner-[^@]*@'i, qr'-request@'i,
-# qr'\.example\.com$'i
-# ));
-
-
-# illustrates the use of regexp lookup table:
-
-@blacklist_sender_maps = ( new_RE(
- qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
- qr'^(investments|lose_weight_today|market\.alert|money2you|MyGreenCard)@'i,
- qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
- qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
- qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
- qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
-));
-
-
-# NOTE: whitelisting is becoming deprecated because sender address is
-# all too often faked; use @score_sender_maps for soft-whitelisting!
-#
-# Illustrates the use of several lookup tables:
-#
-# @whitelist_sender_maps = (
-#
-# # read_hash("$MYHOME/whitelist_sender"), # a hash table read from a file
-#
-# # and another hash lookup table constructed in-line, with keys lowercased:
-# { map {lc $_ => 1} qw(
-# nobody@cert.org
-# cert-advisory@us-cert.gov
-# owner-alert@iss.net
-# slashdot@slashdot.org
-# bugtraq@securityfocus.com
-# NTBUGTRAQ@LISTSERV.NTBUGTRAQ.COM
-# security-alerts@linuxsecurity.com
-# amavis-user-admin@lists.sourceforge.net
-# amavis-user-bounces@lists.sourceforge.net
-# notification-return@lists.sophos.com
-# mailman-announce-admin@python.org
-# owner-postfix-users@postfix.org
-# owner-postfix-announce@postfix.org
-# owner-sendmail-announce@lists.sendmail.org
-# sendmail-announce-request@lists.sendmail.org
-# owner-technews@postel.ACM.ORG
-# lvs-users-admin@LinuxVirtualServer.org
-# ietf-123-owner@loki.ietf.org
-# cvs-commits-list-admin@gnome.org
-# rt-users-admin@lists.fsck.com
-# clp-request@comp.nus.edu.sg
-# surveys-errors@lists.nua.ie
-# emailNews@genomeweb.com
-# owner-textbreakingnews@CNNIMAIL12.CNN.COM
-# yahoo-dev-null@yahoo-inc.com
-# returns.groups.yahoo.com
-# )},
-#
-# # { '' => 1 }, # and another one, containing just an empty reverse path (DSN)
-#
-# );
-
-
-# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
-
-# The same semantics as for global white/blacklisting applies, but this
-# time each recipient (or its domain, or subdomain, ...) can be given
-# an individual lookup table for matching senders. The per-recipient lookups
-# take precedence over the global lookups, which serve as a fallback default.
-
-# Specify a two-level lookup table: the key for the outer table is recipient,
-# and the result should be an inner lookup table (hash or ACL or RE),
-# where the key used will be the sender. (Note that this structure is flatter
-# than @score_sender_maps, where the first level result is a ref to a _list_
-# of inner lookup tables, not a ref to a single lookup table.)
-#
-#$per_recip_blacklist_sender_lookup_tables = {
-# 'user1@my.example.com'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
-# 'user2@my.example.com'=>[qw( spammer@d1.example,org .d2.example,org )],
-#};
-#$per_recip_whitelist_sender_lookup_tables = {
-# 'user@my.example.com' => [qw( friend@example.org .other.example.org )],
-# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
-# '.my2.example.com' => read_hash("$MYHOME/my2-wl.dat"),
-# 'abuse@' => { 'postmaster@'=>1,
-# 'cert-advisory-owner@cert.org'=>1, 'owner-alert@iss.net'=>1 },
-#};
-
-
-#
-# Section VI - Resource limits
-#
-
-# Sanity limit to the number of allowed recipients per SMTP transaction
-# $smtpd_recipient_limit = 1100; # (default is 1100)
-
-# Resource limits to protect unpackers, decompressors and virus scanners
-# against mail bombs (e.g. 42.zip)
-
-
-# Maximum recursion level for extraction/decoding (0 or undef disables limit)
-$MAXLEVELS = 14; # (default is undef, no limit)
-
-# Maximum number of extracted files (0 or undef disables the limit)
-$MAXFILES = 1500; # (default is undef, no limit)
-
-# For the cumulative total of all decoded mail parts we set max storage size
-# to defend against mail bombs. Even though parts may be deleted (replaced
-# by decoded text) during decoding, the size they occupied is _not_ returned
-# to the quota pool.
-#
-# Parameters to storage quota formula for unpacking/decoding/decompressing
-# Formula:
-# quota = max($MIN_EXPANSION_QUOTA,
-# $mail_size*$MIN_EXPANSION_FACTOR,
-# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
-# In plain words (later condition overrules previous ones):
-# allow MAX_EXPANSION_FACTOR times initial mail size,
-# but not more than MAX_EXPANSION_QUOTA,
-# but not less than MIN_EXPANSION_FACTOR times initial mail size,
-# but never less than MIN_EXPANSION_QUOTA
-#
-$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
-$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
-$MIN_EXPANSION_FACTOR = 5; # times original mail size (default is 5)
-$MAX_EXPANSION_FACTOR = 500; # times original mail size (default is 500)
-
-# expiration time of cached results: time to live in seconds
-# (how long the result of a virus/spam test remains valid)
-$virus_check_negative_ttl= 3*60; # time to remember that mail was not infected
-$virus_check_positive_ttl= 30*60; # time to remember that mail was infected
-$spam_check_negative_ttl = 10*60; # time to remember that mail was not spam
-$spam_check_positive_ttl = 30*60; # time to remember that mail was spam
-#
-# NOTE:
-# Cache size will be determined by the largest of the $*_ttl values.
-# Depending on the mail rate, the cache database may grow quite large.
-# Reasonable compromise for the max value is 15 minutes to 2 hours.
-
-#
-# Section VII - External programs, virus scanners
-#
-
-# Specify a path string, which is a colon-separated string of directories
-# (no trailing slashes!) to be assigned to the environment variable PATH
-# and to serve for locating external programs below.
-
-# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
-# relative to the chroot directory specified;
-
-$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin:/opt/bin';
-
-# For external programs specify one string or a search list of strings (first
-# match wins). The string (or: each string in a list) may be an absolute path,
-# or just a program name, to be located via $path;
-# Empty string or undef (=default) disables the use of that external program.
-# Optionally command arguments may be specified - only the first substring
-# up to the whitespace is used for file searching.
-
-$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
-$dspam = 'dspam';
-
-# A list of pairs or n-tuples: [short-type, code_ref, optional-args...].
-# Maps short types to a decoding routine, the first match wins.
-# Arguments beyond the first two can be program path string (or a listref of
-# paths to be searched) or a reference to a variable containing such a path,
-# which allows for lazy evaluation, making possible to assign values to
-# legacy configuration variables even after the assignment to @decoders.
-#
@decoders = (
['mail', \&do_mime_decode],
['asc', \&do_ascii],
- ['uue', \&do_ascii],
- ['hqx', \&do_ascii],
- ['ync', \&do_ascii],
+# ['uue', \&do_ascii],
+# ['hqx', \&do_ascii],
+# ['ync', \&do_ascii],
['F', \&do_uncompress, ['unfreeze','freeze -d','melt','fcat'] ],
['Z', \&do_uncompress, ['uncompress','gzip -d','zcat'] ],
['gz', \&do_uncompress, 'gzip -d'],
['gz', \&do_gunzip],
['bz2', \&do_uncompress, 'bzip2 -d'],
+ ['xz', \&Amavis::Unpackers::do_uncompress,
+ ['xzdec', 'xz -dc', 'unxz -c', 'xzcat'] ],
+ ['lzma', \&Amavis::Unpackers::do_uncompress,
+ ['lzmadec', 'xz -dc --format=lzma',
+ 'lzma -dc', 'unlzma -c', 'lzcat', 'lzmadec'] ],
['lzo', \&do_uncompress, 'lzop -d'],
['rpm', \&do_uncompress, ['rpm2cpio.pl','rpm2cpio'] ],
['cpio', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
['tar', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
['deb', \&do_ar, 'ar'],
-# ['a', \&do_ar, 'ar'], # unpacking .a seems an overkill
+ ['a', \&do_ar, 'ar'], # unpacking .a seems an overkill
['zip', \&do_unzip],
['7z', \&do_7zip, ['7zr','7za','7z'] ],
['rar', \&do_unrar, ['rar','unrar'] ],
['arj', \&do_unarj, ['arj','unarj'] ],
['arc', \&do_arc, ['nomarch','arc'] ],
['zoo', \&do_zoo, ['zoo','unzoo'] ],
- ['lha', \&do_lha, 'lha'],
+ ['lha', \&do_lha, 'lha'], # unmaintained - security risk
# ['doc', \&do_ole, 'ripole'],
['cab', \&do_cabextract, 'cabextract'],
['tnef', \&do_tnef_ext, 'tnef'],
);
-# SpamAssassin settings
-
-# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
-# of the option local_tests_only. See Mail::SpamAssassin man page.
-# If set to 1, no SA tests that require internet access will be performed.
-#
-$sa_local_tests_only = 0; # only tests which do not require internet access?
-#$sa_auto_whitelist = 1; # turn on AWL in SA 2.63 or older (irrelevant
- # for SA 3.0, its cf option is use_auto_whitelist)
-
-$sa_mail_body_size_limit = 400*1024; # don't waste time on SA if mail is larger
- # (less than 1% of spam is > 64k)
- # default: undef, no limitations
-
-# default values, customarily used in the @spam_*_level_maps as the last entry
-$sa_tag_level_deflt = 2.0; # add spam info headers if at, or above that level;
- # undef is interpreted as lower than any spam level
-$sa_tag2_level_deflt = 6.31;# add 'spam detected' headers at that level to
- # passed mail, adding address extensions;
-$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
- # at or above that level: bounce/reject/drop,
- # quarantine
-$sa_dsn_cutoff_level = 9; # spam level beyond which a DSN is not sent,
- # effectively turning D_BOUNCE into D_DISCARD;
- # undef disables this feature and is a default;
-# see also $sa_quarantine_cutoff_level above, which only controls quarantining
-
-# $penpals_bonus_score = 5; # (positive) score by which spam score is lowered
- # when sender is known to have previously received mail from our
- # local user from this mail system; zero or undef disables penpals
- # lookups in SQL; default: undef
-# $penpals_halflife = 10*24*60*60; #exponential decay time constant in seconds;
- # penpal bonus is halved for each halflife period from the last mail
- # sent by a local user to a current mail's sender; default: 7 days
-# $penpals_threshold_low = 1.0; # no need for pen pals lookup on low spam score
-# $penpals_threshold_high = $sa_kill_level_deflt; # don't waste time on hi spam
-
-# $bounce_killer_score = 100; # spam score points to add for joe-jobbed bounces
- # bounce killer needs operational SQL logging (pen pals) !
-
-# advanced example specifying per-recipient values using a hash lookup:
-#@spam_tag_level_maps = (\$sa_tag_level_deflt); # this is a default
-#@spam_tag2_level_maps = (
-# { 'user1@example.com' => 8.0, '.example.com' => 6.0 },
-# \$sa_tag2_level_deflt, # catchall default
-#);
-#@spam_kill_level_maps = (
-# { 'user1@example.com' => 8.0, '.example.com' => 6.0 },
-# \$sa_kill_level_deflt, # catchall default
-#);
-#@spam_dsn_cutoff_level_maps = (
-# { 'user1@example.com' => 10, '.example.com' => 15 },
-# \$sa_dsn_cutoff_level, # catchall default
-#);
-
-# selectively trim down bounces to domains sending their own bounces with
-# non-null return path, to frequently abused domains, or to those sending
-# marginal spam
-@spam_dsn_cutoff_level_bysender_maps = (
- { # an associative array (hash) lookup table, use lowercase keys
- 'virgilio.it' => 7, 'mail.ru' => 7, '0451.com' => 7,
- 'yahoo.co.uk' => 7, 'yahoo.co.jp' => 7, 'nobody@' => 7,
- 'noreply@' => 0, 'no-reply@' => 0, 'donotreply@' => 0,
- 'opt-in@' => 0, 'opt-out@' => 0, 'yahoo-dev-null@' => 0,
- '.optin-out.com' => 0, 'daily@astrocenter.com' => 0,
- 'spamadmin@fraunhofer.de'=> 7, # Sophos PureMessage spam bounces
- },
- \$sa_dsn_cutoff_level, # catchall default value
-);
-
-# a quick reference:
-# tag_level contents category: CC_CLEAN,
-# controls adding the X-Spam-Status and X-Spam-Level headers,
-# tag2_level contents category: CC_SPAMMY,
-# controls adding 'X-Spam-Flag: YES', editing (tagging) Subject,
-# and adding address extensions,
-# tag3_level contents category: CC_SPAMMY, minor category 1,
-# like tag2, but may insert different Subject tag
-# e.g. @spam_subject_tag3_maps=('***BLATANT*SPAM*** ');
-# kill_level contents category: CC_SPAM,
-# controls 'evasive actions' (reject, quarantine);
-# it only makes sense to maintain the relationship:
-# tag_level <= tag2_level <= tag3_level <= kill_level <
-# < dsn_cutoff_level <= quarantine_cutoff_level
-
-# string to prepend to Subject header field when message exceeds tag2 level
-#$sa_spam_subject_tag = '***SPAM*** '; # (defaults to undef, disabled)
- # (only seen when spam is passed and recipient is
- # in local_domains*)
-# more examples, using @*_maps directly:
-#@spam_subject_tag_maps = ('[possible-spam:_SCORE_] ');
-#@spam_subject_tag2_maps = ('***SPAM*** _SCORE_ (_REQD_) ');
-#@spam_subject_tag3_maps = ('***BLATANT*SPAM**** _SCORE_ (_REQD_) ');
-# another examples, using _maps_by_ccat:
-#$subject_tag_maps_by_ccat{+CC_CLEAN} = [
-# { lc('TestUser@example.net') =>
-# '**TEST:_U_,hits=_SCORE_,req=_REQD_,amid=_TASKID_,mid=_MAILID_**' } ];
-
-#$sa_spam_modifies_subj = 1; # in @spam_modifies_subj_maps, default is true
-
-# Example: modify Subject for all local recipients except user@example.com
-#@spam_modifies_subj_maps = ( [qw( !user@example.com . )] );
-
-#$sa_spam_level_char = '*'; # char for X-Spam-Level bar, defaults to '*';
- # undef or empty disables inserting X-Spam-Level
-#$sa_spam_report_header = 0; # insert X-Spam-Report header field? default false
-
-# stop anti-virus scanning when the first scanner detects a virus?
-#$first_infected_stops_scan = 1; # default is false, all scanners in a section
- # are called
-
-# @av_scanners is a list of n-tuples, where fields semantics is:
-# 1. av scanner plain name, to be used in log and reports;
-# 2a.scanner program name; this string will be submitted to subroutine
-# find_external_programs(), which will try to find the full program path
-# name during startup; if program is not found, this scanner is disabled.
-# Besides a simple string (full program path name or just the basename
-# to be looked for in PATH), this may be an array ref of alternative
-# program names or full paths - the first match in the list will be used;
-# 2b.alternatively, this second field may be a subroutine reference,
-# and the whole n-tuple entry is passed to it as args; it should return
-# a triple: ($scan_status,$output,$virusnames_ref), where:
-# - $scan_status is: true if a virus was found, 0 if no viruses,
-# undef if scanner was unable to complete its job (failed);
-# - $output is an optional result string to appear in logging and macro %v;
-# - $virusnames_ref is a ref to a list of detected virus names (may be
-# undef or a ref to an empty list);
-# 3. command arguments to be given to the scanner program;
-# a substring {} will be replaced by the directory name to be scanned, i.e.
-# "$tempdir/parts", a "*" will be replaced by base file names of parts;
-# 4. an array ref of av scanner exit status values, or a regexp (to be
-# matched against scanner output), indicating NO VIRUSES found;
-# a special case is a value undef, which does not claim file to be clean
-# (i.e. it never matches, similar to []), but suppresses a failure warning;
-# to be used when the result is inconclusive (useful for specialized and
-# quick partial scanners such as jpeg checker);
-# 5. an array ref of av scanner exit status values, or a regexp (to be
-# matched against scanner output), indicating VIRUSES WERE FOUND;
-# a value undef may be used and it never matches (for consistency with 4.);
-# Note: the virus match prevails over a 'not found' match, so it is safe
-# even if the no. 4. matches for viruses too;
-# 6. a regexp (to be matched against scanner output), returning a list
-# of virus names found, or a sub ref, returning such a list when given
-# scanner output as argument;
-# 7. and 8.: (optional) subroutines to be executed before and after scanner
-# (e.g. to set environment or current directory);
-# see examples for these at KasperskyLab AVP and NAI uvscan.
-
-# NOTES:
-#
-# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
-# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
-# (which can be handy if all you want to do is spam scanning);
-#
-# - the order matters: although _all_ available entries from the list
-# are tried regardless of their verdict, scanners are run in the order
-# specified: the report from the first one detecting a virus will be used
-# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
-# see also $first_infected_stops_scan;
-#
-# - it doesn't hurt to keep an unused command line scanner entry in the list
-# if the program can not be found; the path search is only performed once
-# during the program startup;
-#
-# COROLLARY: to disable a scanner that _does_ exist on your system,
-# comment out its entry or use undef or '' as its program name/path
-# (second parameter). An example where this is almost a must: disable
-# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
-# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
-# program happens to have a name matching one of the entries ('sweep'
-# again comes to mind);
-#
-# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
-# for interfacing (where the second parameter starts with \&).
-# Keeping such entry and not having a corresponding virus scanner daemon
-# causes an unnecessary connection attempt (which eventually times out,
-# but it wastes precious time). For this reason the daemonized entries
-# are commented in the distribution - just remove the '#' where needed.
-#
-# CERT list of av resources: http://www.cert.org/other_sources/viruses.html
-
@av_scanners = (
+# ### http://www.sophos.com/
+# ['Sophos-SSSP',
+# \&ask_daemon, ["{}", 'sssp:/var/run/savdi/sssp.sock'],
+# # or: ["{}", 'sssp:[127.0.0.1]:4010'],
+# qr/^DONE OK\b/m, qr/^VIRUS\b/m, qr/^VIRUS\s*(\S*)/m ],
+
# ### http://www.clanfield.info/sophie/ (http://www.vanja.com/tools/sophie/)
# ['Sophie',
-# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
+# \&ask_daemon, ["{}/\n", 'sophie:/var/run/sophie'],
+# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
-# ['Sophos SAVI', \&sophos_savi ],
+# ['Sophos SAVI', \&ask_daemon, ['{}','savi-perl:'] ],
+
+# ['Avira SAVAPI',
+# \&ask_daemon, ["*", 'savapi:/var/tmp/.savapi3', 'product-id'],
+# qr/^(200|210)/m, qr/^(310|420|319)/m,
+# qr/^(?:310|420)[,\s]*(?:.* <<< )?(.+?)(?: ; |$)/m ],
+# settings for the SAVAPI3.conf: ArchiveScan=1, HeurLevel=2, MailboxScan=1
### http://www.clamav.net/
['ClamAV-clamd',
\&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.sock"],
qr/\bOK$/m, qr/\bFOUND$/m,
qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# NOTE: run clamd under the same user as amavisd, or run it under its own
-# uid such as clamav, add user clamav to the amavis group, and then add
-# AllowSupplementaryGroups to clamd.conf;
-# NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
+# NOTE: run clamd under the same user as amavisd - or run it under its own
+# # uid such as clamav, add user clamav to the amavis group, and then add
+# # AllowSupplementaryGroups to clamd.conf;
+# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
+# # this entry; when running chrooted one may prefer a socket under $MYHOME.
# ### http://www.clamav.net/ and CPAN (memory-hungry! clamd is preferred)
# # note that Mail::ClamAV requires perl to be build with threading!
-# ['Mail::ClamAV', \&ask_clamav, "*", [0], [1], qr/^INFECTED: (.+)/m ],
+# ['Mail::ClamAV', \&ask_daemon, ['{}','clamav-perl:'],
+# [0], [1], qr/^INFECTED: (.+)/m],
# ### http://www.openantivirus.org/
# ['OpenAntiVirus ScannerDaemon (OAV)',
# ### http://www.vanja.com/tools/trophie/
# ['Trophie',
-# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
+# \&ask_daemon, ["{}/\n", 'trophie:/var/run/trophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
# directory $TEMPBASE specifies) in the 'Names=' section.
# cd /opt/AVP/DaemonClients; configure; cd Sample; make
# cp AvpDaemonClient /opt/AVP/
- # su - vscan -c "${PREFIX}/kavdaemon ${DPARMS}"
+ # su - amavis -c "${PREFIX}/kavdaemon ${DPARMS}"
### http://www.centralcommand.com/
['CentralCommand Vexira (new) vascan',
# protected files are to be considered infected.
### http://www.avira.com/
- ### Avira AntiVir (formerly H+BEDV) or (old) CentralCommand Vexira Antivirus
+ ### old Avira AntiVir 2.x (ex H+BEDV) or old CentralCommand Vexira Antivirus
['Avira AntiVir', ['antivir','vexira'],
'--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/m,
qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
# NOTE: if you only have a demo version, remove -z and add 214, as in:
# '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,
+ ### http://www.avira.com/
+ ### Avira for UNIX 3.x
+ ['Avira AntiVir', ['avscan'],
+ '-s --batch --alert-action=none {}', [0,4], qr/(?:ALERT|FUND):/m,
+ qr/(?:ALERT|FUND): (?:.* <<< )?(.+?)(?: ; |$)/m ],
+
### http://www.commandsoftware.com/
['Command AntiVirus for Linux', 'csav',
'-all -archive -packed {}', [50], [51,52,53],
### http://www.nai.com/
['NAI McAfee AntiVirus (uvscan)', 'uvscan',
- '--secure -rv --mime --summary --noboot --mailbox --program --timeout 180 - {}', [0], [13],
+ '--secure -rv --mime --summary --noboot - {}', [0], [13],
qr/(?x) Found (?:
\ the\ (.+)\ (?:virus|trojan) |
\ (?:virus|trojan)\ or\ variant\ ([^ ]+) |
### http://www.bitdefender.com/
['BitDefender', 'bdscan', # new version
- '--action=ignore --no-list {}', qr/^Infected files *:0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/m,
- qr/(?:suspected|infected): (.*)(?:\033|$)/m ],
+ '--action=ignore --no-list {}', qr/^Infected files\s*:\s*0+(?!\d)/m,
+ qr/^(?:Infected files|Identified viruses|Suspect files)\s*:\s*0*[1-9]/m,
+ qr/(?:suspected|infected)\s*:\s*(.*)(?:\033|$)/m ],
### http://www.bitdefender.com/
['BitDefender', 'bdc', # old version
'-v 1 -summary 0 -s {}', [0], [1,2],
qr/(?:VIR|WIR):[ \t]*(.+)/m ],
+# ### a generic SMTP-client interface to a SMTP-based virus scanner
+# ['av_smtp', \&ask_av_smtp,
+# ['{}', 'smtp:[127.0.0.1]:5525', 'dummy@localhost'],
+# qr/^2/, qr/^5/, qr/^\s*(.*?)\s*$/m ],
+
# ['File::Scan', sub {Amavis::AV::ask_av(sub{
# use File::Scan; my($fn)=@_;
# my($f)=File::Scan->new(max_txt_size=>0, max_bin_size=>0);
# # NOTE: place file JpegTester.pm somewhere where Perl can find it,
# # for example in /usr/local/lib/perl5/site_perl
-# ### example: simpleminded checker for JPEG marker segments with
-# ### invalid length (only checks first 32k, which is not thorough enough)
-# ['check-jpeg-simple',
-# sub { Amavis::AV::ask_av(sub {
-# my($f)=@_; local(*FF,$_,$1,$2); my(@r)=(0,'not jpeg');
-# open(FF,$f) or die "jpeg: open err $f: $!";
-# binmode(FF) or die "jpeg: binmode err $f: $!";
-# defined read(FF,$_,32000) or die "jpeg: read err $f: $!";
-# close(FF) or die "jpeg: close err $f: $!";
-# if (/^\xff\xd8\xff/) {
-# @r=(0,'jpeg ok');
-# while (!/\G(?:\xff\xd9|\z)/gc) { # EOI or eof
-# if (/\G\xff+(?=\xff|\z)/gc) {} # fill-bytes before marker
-# elsif (/\G\xff([\x01\xd0-\xd8])/gc) {} # TEM, RSTi, SOI
-# elsif (/\G\xff([^\x00\xff])(..)/gcs) { # marker segment start
-# my($n)=unpack("n",$2)-2;
-# $n=32766 if $n>32766; # Perl regexp limit
-# if ($n<0) {@r=(1,"bad jpeg: len=$n, pos=".pos); last}
-# elsif (/\G.{$n}/gcs) {} # ok
-# elsif (/\G.{0,$n}\z/gcs) {last} # truncated
-# else {@r=(1,"bad jpeg: unexpected, pos=".pos); last}
-# }
-# elsif (/\G[^\xff]+/gc) {} # ECS
-# elsif (/\G(?:\xff\x00)+/gc) {} # ECS
-# else {@r=(2,"bad jpeg: unexpected char, pos=".pos); last}
-# }
-# }; @r}, @_) },
-# ["{}/*"], undef, [1], qr/^(bad jpeg: .*)$/m ],
-
-# ### an example/testing/template virus scanner (external), wastes 3 seconds
-# ['wasteful sleeper example',
-# '/bin/sleep', '3', # calls external program
-# undef, undef, qr/no such/m ],
-
-# ### an example/testing/template virus scanner (internal), does nothing
-# ['null',
-# sub {}, ["{}"], # supplies its own subroutine, no external program
-# undef, undef, qr/no such/m ],
-
);
-# If no virus scanners from the @av_scanners list produce 'clean' nor
-# 'infected' status (i.e. they all fail to run or the list is empty),
-# then _all_ scanners from the @av_scanners_backup list are tried
-# (again, subject to $first_infected_stops_scan). When there are both
-# daemonized and equivalent or similar command-line scanners available,
-# it is customary to place slower command-line scanners in the
-# @av_scanners_backup list. The default choice is somewhat arbitrary,
-# move entries from one list to another as desired, keeping main scanners
-# in the primary list to avoid warnings.
-
@av_scanners_backup = (
### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
"--stdout --no-summary -r --tempdir=$TEMPBASE {}",
[0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
+# ### http://www.clamav.net/ - using remote clamd scanner as a backup
+# ['ClamAV-clamdscan', 'clamdscan',
+# "--stdout --no-summary --config-file=/etc/clamd-client.conf {}",
+# [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
+
+# ['ClamAV-clamd-stream',
+# \&ask_daemon, ["*", 'clamd:/var/run/clamav/clamd.sock'],
+# qr/\bOK$/m, qr/\bFOUND$/m,
+# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
+
### http://www.f-prot.com/ - backs up F-Prot Daemon, V6
['F-PROT Antivirus for UNIX', ['fpscan'],
'--report --mount --adware {}', # consider: --applications -s 4 -u 3 -z 10
### http://www.f-prot.com/ - backs up F-Prot Daemon (old)
['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
- '-dumb -ai -archive -packed -server {}', [0,8], [3,6], # or: [0], [3,6,8],
+ '-dumb -archive -packed {}', [0,8], [3,6], # or: [0], [3,6,8],
qr/(?:Infection:|security risk named) (.+)|\s+contains\s+(.+)$/m ],
### http://www.trendmicro.com/ - backs up Trophie
);
-#
-# Section VIII - Debugging
-#
-
-# The most useful debugging tool is to run amavisd-new non-detached
-# from a terminal window using command: # amavisd debug
-
-# Some more refined approaches:
-
-# If sender matches ACL, turn debugging fully up, just for this one message
-#@debug_sender_maps = ( ["test-sender\@$mydomain"] );
-#@debug_sender_maps = ( [qw( debug@example.com debug@example.net )] );
-
-# May be useful along with @debug_sender_maps:
-# Prevent all decoded originals being deleted (replaced by decoded part)
-#@keep_decoded_original_maps = (1);
-
-# Turn on SpamAssassin debugging (output to STDERR, use with 'amavisd debug')
-#$sa_debug = '1,all'; # defaults to false
-
-
-#
-# Section IX - Policy banks (dynamic policy switching)
-#
-
-## Define some policy banks (sets of settings) and give them
-## arbitrary names (the names '', 'MYNETS' and 'MYUSERS' have special meaning):
-#
-# $policy_bank{'ALT'} = {
-# log_level => 3,
-# syslog_ident => 'alt-amavis',
-# syslog_facility => 'LOCAL3',
-# inet_acl => [qw( 10.0.1.14 )],
-# final_spam_destiny => D_PASS, final_bad_header_destiny => D_PASS,
-# forward_method => 'smtp:*:*',
-# notify_method => 'smtp:[127.0.0.1]:10025',
-# virus_admin_maps => "abuse\@$mydomain",
-# spam_lovers_maps => [@spam_lovers_maps, [qw( abuse@example.com )]],
-# spam_tag_level_maps => 2.1,
-# spam_tag2_level_maps => 6.32,
-# spam_kill_level_maps => 6.72,
-# spam_dsn_cutoff_level_maps => 8,
-# defang_spam => 1,
-# local_client_bind_address => '10.11.12.13',
-# localhost_name => 'amavis.example.com',
-# smtpd_greeting_banner =>
-# '${helo-name} ${protocol} ${product} ${version-id} (${version-date}) TEST service ready';
-# auth_mech_avail => [qw(PLAIN LOGIN)],
-# auth_required_inp => 1,
-# auth_required_out => 1,
-# amavis_auth_user => 'amavisd', amavis_auth_pass = 'tOpsecretX',
-# av_scanners => [ # provide only 'free' scanners
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/, qr/\bFOUND$/,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/,
-# ],
-# ],
-# av_scanners_backup => [
-# ['ClamAV-clamscan', 'clamscan',
-# "--stdout --disable-summary -r --tempdir=$TEMPBASE {}", [0], [1],
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/,
-# ],
-# ],
-# };
-
-# NOTE: the use of policy banks for changing protocol on the input socket is
-# only needed when different protocols need to be spoken on different sockets
-# at the same time. For normal use just set globally e.g.: $protocol='AM.PDP';
-#
-#$policy_bank{'AM.PDP-SOCK'} = {
-# protocol => 'AM.PDP', # Amavis policy delegation protocol
-# auth_required_release => 0, # do not require secret_id for amavisd-release
-#};
-#
-#$policy_bank{'AM.PDP-INET'} = {
-# protocol => 'AM.PDP', # Amavis policy delegation protocol
-# inet_acl => [qw( 127.0.0.1 [::1] )], # restrict to these IP addresses
-#};
-#
-## the name 'MYNETS' has special semantics: this policy bank gets loaded
-## whenever MTA supplies the original SMTP client IP address (Postfix XFORWARD
-## extension or a new AM.PDP protocol) and that address matches @mynetworks.
-#
-# $terminate_dsn_on_notify_success = 1;
-# $policy_bank{'MYNETS'} = { # mail originating from @mynetworks
-# originating => 1, # is true in MYNETS by deflt, but let's make it explicit
-# terminate_dsn_on_notify_success => 0,
-# spam_kill_level_maps => 6.9,
-# syslog_facility => 'LOCAL4', # tell syslog to log to a separate file
-# virus_admin_maps => ["virusalert\@$mydomain"], # alert of internal viruses
-# spam_admin_maps => ["spamalert\@$mydomain"], # alert of internal spam
-# bypass_spam_checks_maps => [1], # or: don't spam-check internal mail
-# bypass_banned_checks_maps => [1], # don't banned-check internal mail
-# warnbadhsender => 1, # warn local senders about their broken MUA
-# banned_filename_maps => ['MYNETS-DEFAULT'], # more permissive banning rules
-# spam_quarantine_cutoff_level_maps => undef, # quarantine all local spam
-# spam_dsn_cutoff_level_maps => undef, # ensure NDN regardless of spam level
-# spam_dsn_cutoff_level_bysender_maps => # but only from local domain senders
-# [ { lc(".$mydomain") => undef, '.' => 15 } ],
-# };
-
-## the name 'MYUSERS' has special semantics: this policy bank gets loaded
-## whenever the sender matches @local_domains_maps. This only makes sense
-## if local sender addresses can be trusted -- for example by requiring
-## authentication before letting users send with their local address.
-#
-# $policy_bank{'MYUSERS'} = {
-# final_virus_destiny => D_BOUNCE, # bounce only to authenticated local users
-# final_banned_destiny=> D_BOUNCE,
-# };
-
-# Needed for Courier: speak courier protocol on the socket
-#$interface_policy{'SOCK'} = 'AM-SOCK';
-#$policy_bank{'AM-SOCK'} = {protocol => 'COURIER'};
-
-## Now we can assign policy banks to amavisd tcp port numbers listed in
-## $inet_socket_port. Whenever the connection from MTA is received, first
-## a built-in policy bank $policy_bank{''} gets loaded, which bringings-in
-## all the global/legacy settings, then it gets overlaid by the bank
-## named in the $interface_policy{$port} if any, and finally the bank
-## 'MYNETS' is overlaid if it exists and the SMTP client IP address
-## is known (by XFORWARD command from MTA) and it matches @mynetworks.
-
-# $interface_policy{'10026'} = 'ALT';
-
-# used by amavisd-release utility of a new AM.PDP-based amavis-milter client
-#$interface_policy{'9998'} = 'AM.PDP-INET';
-#$interface_policy{'SOCK'} = 'AM.PDP-SOCK';
-
-# invoke custom hooks or additional configuration files:
-# include_config_files('/etc/amavisd-custom.conf');
-
-# Want to execute additional configuration files from some directory?
-#{ my($d) = '/etc/amavis/conf.d'; # do *.cf or *.conf files in this directory
-# local(*D); opendir(D,$d) or die "Can't open dir $d: $!";
-# my(@d) = sort grep {/\.(cf|conf)$/ && -f} map {/^(.*)$/,"$d/$1"} readdir(D);
-# closedir(D) or die "Can't close $d: $!";
-# include_config_files($_) for (@d);
-#}
-
1; # insure a defined return value
+++ /dev/null
-use strict;
-
-# a minimalistic configuration file for amavisd-new with all necessary settings
-#
-# see amavisd.conf-default for a list of all variables with their defaults;
-# for more details see documentation in INSTALL, README_FILES/*
-# and at http://www.ijs.si/software/amavisd/amavisd-new-docs.html
-
-
-# COMMONLY ADJUSTED SETTINGS:
-
-# @bypass_virus_checks_maps = (1); # controls running of anti-virus code
-# @bypass_spam_checks_maps = (1); # controls running of anti-spam code
-# $bypass_decode_parts = 1; # controls running of decoders&dearchivers
-
-$max_servers = 2; # num of pre-forked children (2..30 is common), -m
-$daemon_user = 'amavis'; # (no default; customary: vscan or amavis), -u
-$daemon_group = 'amavis'; # (no default; customary: vscan or amavis), -g
-
-$mydomain = 'example.com'; # a convenient default for other settings
-
-# $MYHOME = '/var/amavis'; # a convenient default for other settings, -H
-$TEMPBASE = "$MYHOME/tmp"; # working directory, needs to exist, -T
-$ENV{TMPDIR} = $TEMPBASE; # environment variable TMPDIR, used by SA, etc.
-$QUARANTINEDIR = "$MYHOME/quarantine"; # -Q
-# $quarantine_subdir_levels = 1; # add level of subdirs to disperse quarantine
-# $release_format = 'resend'; # 'attach', 'plain', 'resend'
-# $report_format = 'arf'; # 'attach', 'plain', 'resend', 'arf'
-
-# $daemon_chroot_dir = $MYHOME; # chroot directory or undef, -R
-
-# $db_home = "$MYHOME/db"; # dir for bdb nanny/cache/snmp databases, -D
-# $helpers_home = "$MYHOME/var"; # working directory for SpamAssassin, -S
-# $lock_file = "$MYHOME/var/amavisd.lock"; # -L
-# $pid_file = "$MYHOME/var/amavisd.pid"; # -P
-#NOTE: create directories $MYHOME/tmp, $MYHOME/var, $MYHOME/db manually
-
-$log_level = 0; # verbosity 0..5, -d
-$log_recip_templ = undef; # disable by-recipient level-0 log entries
-$do_syslog = 1; # log via syslogd (preferred)
-$syslog_facility = 'mail'; # Syslog facility as a string
- # e.g.: mail, daemon, user, local0, ... local7
-
-$enable_db = 1; # enable use of BerkeleyDB/libdb (SNMP and nanny)
-$nanny_details_level = 2; # nanny verbosity: 1: traditional, 2: detailed
-$enable_dkim_verification = 0; # enable DKIM signatures verification
-$enable_dkim_signing = 0; # load DKIM signing code, keys defined by dkim_key
-
-@local_domains_maps = ( [".$mydomain"] ); # list of all local domains
-
-@mynetworks = qw( 127.0.0.0/8 [::1] [FE80::]/10 [FEC0::]/10
- 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 );
-
-$unix_socketname = "$MYHOME/amavisd.sock"; # amavisd-release or amavis-milter
- # option(s) -p overrides $inet_socket_port and $unix_socketname
-
-$inet_socket_port = 10024; # listen on this local TCP port(s)
-# $inet_socket_port = [10024,10026]; # listen on multiple TCP ports
-
-$policy_bank{'MYNETS'} = { # mail originating from @mynetworks
- originating => 1, # is true in MYNETS by default, but let's make it explicit
- os_fingerprint_method => undef, # don't query p0f for internal clients
-};
-
-# it is up to MTA to re-route mail from authenticated roaming users or
-# from internal hosts to a dedicated TCP port (such as 10026) for filtering
-$interface_policy{'10026'} = 'ORIGINATING';
-
-$policy_bank{'ORIGINATING'} = { # mail supposedly originating from our users
- originating => 1, # declare that mail was submitted by our smtp client
- allow_disclaimers => 1, # enables disclaimer insertion if available
- # notify administrator of locally originating malware
- virus_admin_maps => ["virusalert\@$mydomain"],
- spam_admin_maps => ["virusalert\@$mydomain"],
- warnbadhsender => 1,
- # forward to a smtpd service providing DKIM signing service
- forward_method => 'smtp:[127.0.0.1]:10027',
- # force MTA conversion to 7-bit (e.g. before DKIM signing)
- smtpd_discard_ehlo_keywords => ['8BITMIME'],
- bypass_banned_checks_maps => [1], # allow sending any file names and types
- terminate_dsn_on_notify_success => 0, # don't remove NOTIFY=SUCCESS option
-};
-
-$interface_policy{'SOCK'} = 'AM.PDP-SOCK'; # only applies with $unix_socketname
-
-# Use with amavis-release over a socket or with Petr Rehor's amavis-milter.c
-# (with amavis-milter.c from this package or old amavis.c client use 'AM.CL'):
-$policy_bank{'AM.PDP-SOCK'} = {
- protocol => 'AM.PDP',
- auth_required_release => 0, # do not require secret_id for amavisd-release
-};
-
-$sa_tag_level_deflt = 2.0; # add spam info headers if at, or above that level
-$sa_tag2_level_deflt = 6.2; # add 'spam detected' headers at that level
-$sa_kill_level_deflt = 6.9; # triggers spam evasive actions (e.g. blocks mail)
-$sa_dsn_cutoff_level = 10; # spam level beyond which a DSN is not sent
-$sa_crediblefrom_dsn_cutoff_level = 18; # likewise, but for a likely valid From
-# $sa_quarantine_cutoff_level = 25; # spam level beyond which quarantine is off
-$penpals_bonus_score = 8; # (no effect without a @storage_sql_dsn database)
-$penpals_threshold_high = $sa_kill_level_deflt; # don't waste time on hi spam
-$bounce_killer_score = 100; # spam score points to add for joe-jobbed bounces
-
-$sa_mail_body_size_limit = 400*1024; # don't waste time on SA if mail is larger
-$sa_local_tests_only = 0; # only tests which do not require internet access?
-
-# @lookup_sql_dsn =
-# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
-# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'],
-# ["DBI:SQLite:dbname=$MYHOME/sql/mail_prefs.sqlite", '', ''] );
-# @storage_sql_dsn = @lookup_sql_dsn; # none, same, or separate database
-
-# $timestamp_fmt_mysql = 1; # if using MySQL *and* msgs.time_iso is TIMESTAMP;
-# defaults to 0, which is good for non-MySQL or if msgs.time_iso is CHAR(16)
-
-$virus_admin = "virusalert\@$mydomain"; # notifications recip.
-
-$mailfrom_notify_admin = "virusalert\@$mydomain"; # notifications sender
-$mailfrom_notify_recip = "virusalert\@$mydomain"; # notifications sender
-$mailfrom_notify_spamadmin = "spam.police\@$mydomain"; # notifications sender
-$mailfrom_to_quarantine = ''; # null return path; uses original sender if undef
-
-@addr_extension_virus_maps = ('virus');
-@addr_extension_banned_maps = ('banned');
-@addr_extension_spam_maps = ('spam');
-@addr_extension_bad_header_maps = ('badh');
-# $recipient_delimiter = '+'; # undef disables address extensions altogether
-# when enabling addr extensions do also Postfix/main.cf: recipient_delimiter=+
-
-$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
-# $dspam = 'dspam';
-
-$MAXLEVELS = 14;
-$MAXFILES = 1500;
-$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
-$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
-
-$sa_spam_subject_tag = '***Spam*** ';
-$defang_virus = 1; # MIME-wrap passed infected mail
-$defang_banned = 1; # MIME-wrap passed mail containing banned name
-# for defanging bad headers only turn on certain minor contents categories:
-$defang_by_ccat{CC_BADH.",3"} = 1; # NUL or CR character in header
-$defang_by_ccat{CC_BADH.",5"} = 1; # header line longer than 998 characters
-$defang_by_ccat{CC_BADH.",6"} = 1; # header field syntax error
-
-
-# OTHER MORE COMMON SETTINGS (defaults may suffice):
-
-# $myhostname = 'host.example.com'; # must be a fully-qualified domain name!
-
-# $notify_method = 'smtp:[127.0.0.1]:10025';
-# $forward_method = 'smtp:[127.0.0.1]:10025'; # set to undef with milter!
-
-# $final_virus_destiny = D_DISCARD;
-# $final_banned_destiny = D_DISCARD;
-# $final_spam_destiny = D_PASS; #!!! D_DISCARD / D_REJECT
-# $final_bad_header_destiny = D_PASS;
-# $bad_header_quarantine_method = undef;
-
-# $os_fingerprint_method = 'p0f:*:2345'; # to query p0f-analyzer.pl
-
-## hierarchy by which a final setting is chosen:
-## policy bank (based on port or IP address) -> *_by_ccat
-## *_by_ccat (based on mail contents) -> *_maps
-## *_maps (based on recipient address) -> final configuration value
-
-
-# SOME OTHER VARIABLES WORTH CONSIDERING (see amavisd.conf-default for all)
-
-# $warnbadhsender,
-# $warnvirusrecip, $warnbannedrecip, $warnbadhrecip, (or @warn*recip_maps)
-#
-# @bypass_virus_checks_maps, @bypass_spam_checks_maps,
-# @bypass_banned_checks_maps, @bypass_header_checks_maps,
-#
-# @virus_lovers_maps, @spam_lovers_maps,
-# @banned_files_lovers_maps, @bad_header_lovers_maps,
-#
-# @blacklist_sender_maps, @score_sender_maps,
-#
-# $clean_quarantine_method, $virus_quarantine_to, $banned_quarantine_to,
-# $bad_header_quarantine_to, $spam_quarantine_to,
-#
-# $defang_bad_header, $defang_undecipherable, $defang_spam
-
-
-# REMAINING IMPORTANT VARIABLES ARE LISTED HERE BECAUSE OF LONGER ASSIGNMENTS
-
-@keep_decoded_original_maps = (new_RE(
- qr'^MAIL$', # retain full original message for virus checking
- qr'^MAIL-UNDECIPHERABLE$', # recheck full mail if it contains undecipherables
- qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
-# qr'^Zip archive data', # don't trust Archive::Zip
-));
-
-
-$banned_filename_re = new_RE(
-
-### BLOCKED ANYWHERE
-# qr'^UNDECIPHERABLE$', # is or contains any undecipherable components
- qr'^\.(exe-ms|dll)$', # banned file(1) types, rudimentary
-# qr'^\.(exe|lha|cab|dll)$', # banned file(1) types
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN UNIX ARCHIVES:
-# [ qr'^\.(gz|bz2)$' => 0 ], # allow any in gzip or bzip2
- [ qr'^\.(rpm|cpio|tar)$' => 0 ], # allow any in Unix-type archives
-
- qr'.\.(pif|scr)$'i, # banned extensions - rudimentary
-# qr'^\.zip$', # block zip type
-
-### BLOCK THE FOLLOWING, EXCEPT WITHIN ARCHIVES:
-# [ qr'^\.(zip|rar|arc|arj|zoo)$'=> 0 ], # allow any within these archives
-
- qr'^application/x-msdownload$'i, # block these MIME types
- qr'^application/x-msdos-program$'i,
- qr'^application/hta$'i,
-
-# qr'^message/partial$'i, # rfc2046 MIME type
-# qr'^message/external-body$'i, # rfc2046 MIME type
-
-# qr'^(application/x-msmetafile|image/x-wmf)$'i, # Windows Metafile MIME type
-# qr'^\.wmf$', # Windows Metafile file(1) type
-
- # block certain double extensions in filenames
- qr'^(?!cid:).*\.[^./]*[A-Za-z][^./]*\.\s*(exe|vbs|pif|scr|bat|cmd|com|cpl|dll)[.\s]*$'i,
-
-# qr'\{[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}\}?'i, # Class ID CLSID, strict
-# qr'\{[0-9a-z]{4,}(-[0-9a-z]{4,}){0,7}\}?'i, # Class ID extension CLSID, loose
-
- qr'.\.(exe|vbs|pif|scr|cpl)$'i, # banned extension - basic
-# qr'.\.(exe|vbs|pif|scr|cpl|bat|cmd|com)$'i, # banned extension - basic+cmd
-# qr'.\.(ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
-# inf|ini|ins|isp|js|jse|lib|lnk|mda|mdb|mde|mdt|mdw|mdz|msc|msi|
-# msp|mst|ocx|ops|pcd|pif|prg|reg|scr|sct|shb|shs|sys|vb|vbe|vbs|vxd|
-# wmf|wsc|wsf|wsh)$'ix, # banned extensions - long
-# qr'.\.(asd|asf|asx|url|vcs|wmd|wmz)$'i, # consider also
-# qr'.\.(ani|cur|ico)$'i, # banned cursors and icons filename
-# qr'^\.ani$', # banned animated cursor file(1) type
-# qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
-);
-# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
-# and http://www.cknow.com/vtutor/vtextensions.htm
-
-
-# ENVELOPE SENDER SOFT-WHITELISTING / SOFT-BLACKLISTING
-
-@score_sender_maps = ({ # a by-recipient hash lookup table,
- # results from all matching recipient tables are summed
-
-# ## per-recipient personal tables (NOTE: positive: black, negative: white)
-# 'user1@example.com' => [{'bla-mobile.press@example.com' => 10.0}],
-# 'user3@example.com' => [{'.ebay.com' => -3.0}],
-# 'user4@example.com' => [{'cleargreen@cleargreen.com' => -7.0,
-# '.cleargreen.com' => -5.0}],
-
- ## site-wide opinions about senders (the '.' matches any recipient)
- '.' => [ # the _first_ matching sender determines the score boost
-
- new_RE( # regexp-type lookup table, just happens to be all soft-blacklist
- [qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou)@'i => 5.0],
- [qr'^(greatcasino|investments|lose_weight_today|market\.alert)@'i=> 5.0],
- [qr'^(money2you|MyGreenCard|new\.tld\.registry|opt-out|opt-in)@'i=> 5.0],
- [qr'^(optin|saveonlsmoking2002k|specialoffer|specialoffers)@'i => 5.0],
- [qr'^(stockalert|stopsnoring|wantsome|workathome|yesitsfree)@'i => 5.0],
- [qr'^(your_friend|greatoffers)@'i => 5.0],
- [qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i => 5.0],
- ),
-
-# read_hash("/var/amavis/sender_scores_sitewide"),
-
- { # a hash-type lookup table (associative array)
- 'nobody@cert.org' => -3.0,
- 'cert-advisory@us-cert.gov' => -3.0,
- 'owner-alert@iss.net' => -3.0,
- 'slashdot@slashdot.org' => -3.0,
- 'securityfocus.com' => -3.0,
- 'ntbugtraq@listserv.ntbugtraq.com' => -3.0,
- 'security-alerts@linuxsecurity.com' => -3.0,
- 'mailman-announce-admin@python.org' => -3.0,
- 'amavis-user-admin@lists.sourceforge.net'=> -3.0,
- 'amavis-user-bounces@lists.sourceforge.net' => -3.0,
- 'spamassassin.apache.org' => -3.0,
- 'notification-return@lists.sophos.com' => -3.0,
- 'owner-postfix-users@postfix.org' => -3.0,
- 'owner-postfix-announce@postfix.org' => -3.0,
- 'owner-sendmail-announce@lists.sendmail.org' => -3.0,
- 'sendmail-announce-request@lists.sendmail.org' => -3.0,
- 'donotreply@sendmail.org' => -3.0,
- 'ca+envelope@sendmail.org' => -3.0,
- 'noreply@freshmeat.net' => -3.0,
- 'owner-technews@postel.acm.org' => -3.0,
- 'ietf-123-owner@loki.ietf.org' => -3.0,
- 'cvs-commits-list-admin@gnome.org' => -3.0,
- 'rt-users-admin@lists.fsck.com' => -3.0,
- 'clp-request@comp.nus.edu.sg' => -3.0,
- 'surveys-errors@lists.nua.ie' => -3.0,
- 'emailnews@genomeweb.com' => -5.0,
- 'yahoo-dev-null@yahoo-inc.com' => -3.0,
- 'returns.groups.yahoo.com' => -3.0,
- 'clusternews@linuxnetworx.com' => -3.0,
- lc('lvs-users-admin@LinuxVirtualServer.org') => -3.0,
- lc('owner-textbreakingnews@CNNIMAIL12.CNN.COM') => -5.0,
-
- # soft-blacklisting (positive score)
- 'sender@example.net' => 3.0,
- '.example.net' => 1.0,
-
- },
- ], # end of site-wide tables
-});
-
-
-@decoders = (
- ['mail', \&do_mime_decode],
-# ['asc', \&do_ascii],
-# ['uue', \&do_ascii],
-# ['hqx', \&do_ascii],
-# ['ync', \&do_ascii],
- ['F', \&do_uncompress, ['unfreeze','freeze -d','melt','fcat'] ],
- ['Z', \&do_uncompress, ['uncompress','gzip -d','zcat'] ],
- ['gz', \&do_uncompress, 'gzip -d'],
- ['gz', \&do_gunzip],
- ['bz2', \&do_uncompress, 'bzip2 -d'],
- ['xz', \&Amavis::Unpackers::do_uncompress,
- ['xzdec'. 'xz -dc', 'unxz -c', 'xzcat'] ],
- ['lzma', \&Amavis::Unpackers::do_uncompress,
- ['lzmadec', 'xz -dc --format=lzma',
- 'lzma -dc', 'unlzma -c', 'lzcat', 'lzmadec'] ],
- ['lzo', \&do_uncompress, 'lzop -d'],
- ['rpm', \&do_uncompress, ['rpm2cpio.pl','rpm2cpio'] ],
- ['cpio', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['tar', \&do_pax_cpio, ['pax','gcpio','cpio'] ],
- ['deb', \&do_ar, 'ar'],
-# ['a', \&do_ar, 'ar'], # unpacking .a seems an overkill
- ['zip', \&do_unzip],
- ['7z', \&do_7zip, ['7zr','7za','7z'] ],
- ['rar', \&do_unrar, ['rar','unrar'] ],
- ['arj', \&do_unarj, ['arj','unarj'] ],
- ['arc', \&do_arc, ['nomarch','arc'] ],
- ['zoo', \&do_zoo, ['zoo','unzoo'] ],
- ['lha', \&do_lha, 'lha'],
-# ['doc', \&do_ole, 'ripole'],
- ['cab', \&do_cabextract, 'cabextract'],
- ['tnef', \&do_tnef_ext, 'tnef'],
- ['tnef', \&do_tnef],
-# ['sit', \&do_unstuff, 'unstuff'], # broken/unsafe decoder
- ['exe', \&do_executable, ['rar','unrar'], 'lha', ['arj','unarj'] ],
-);
-
-
-@av_scanners = (
-
-# ### http://www.sophos.com/
-# ['Sophos-SSSP',
-# \&ask_daemon, ["{}", 'sssp:/var/run/savdi/sssp.sock'],
-# # or: ["{}", 'sssp:[127.0.0.1]:4010'],
-# qr/^DONE OK\b/m, qr/^VIRUS\b/m, qr/^VIRUS\s*(\S*)/m ],
-
-# ### http://www.clanfield.info/sophie/ (http://www.vanja.com/tools/sophie/)
-# ['Sophie',
-# \&ask_daemon, ["{}/\n", 'sophie:/var/run/sophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
-# ['Sophos SAVI', \&ask_daemon, ['{}','savi-perl:'] ],
-
-# ['Avira SAVAPI',
-# \&ask_daemon, ["*", 'savapi:/var/tmp/.savapi3', 'product-id'],
-# qr/^(200|210)/m, qr/^(310|420|319)/m,
-# qr/^(?:310|420)[,\s]*(?:.* <<< )?(.+?)(?: ; |$)/m
-# settings for the SAVAPI3.conf: ArchiveScan=1, HeurLevel=2, MailboxScan=1
-
-# ### http://www.clamav.net/
-# ['ClamAV-clamd',
-# \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-# # NOTE: run clamd under the same user as amavisd, or run it under its own
-# # uid such as clamav, add user clamav to the amavis group, and then add
-# # AllowSupplementaryGroups to clamd.conf;
-# # NOTE: match socket name (LocalSocket) in clamav.conf to the socket name in
-# # this entry; when running chrooted one may prefer socket "$MYHOME/clamd".
-
-# ### http://www.clamav.net/ and CPAN (memory-hungry! clamd is preferred)
-# # note that Mail::ClamAV requires perl to be build with threading!
-# ['Mail::ClamAV', \&ask_daemon, ['{}','clamav-perl:'],
-# [0], [1], qr/^INFECTED: (.+)/m],
-
-# ### http://www.openantivirus.org/
-# ['OpenAntiVirus ScannerDaemon (OAV)',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
-# qr/^OK/m, qr/^FOUND: /m, qr/^FOUND: (.+)/m ],
-
-# ### http://www.vanja.com/tools/trophie/
-# ['Trophie',
-# \&ask_daemon, ["{}/\n", 'trophie:/var/run/trophie'],
-# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/m, qr/(?x)^ 1 ( : | [\000\r\n]* $)/m,
-# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/m ],
-
-# ### http://www.grisoft.com/
-# ['AVG Anti-Virus',
-# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:55555'],
-# qr/^200/m, qr/^403/m, qr/^403 .*?: ([^\r\n]+)/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot fpscand', # F-PROT Antivirus for BSD/Linux/Solaris, version 6
-# \&ask_daemon,
-# ["SCAN FILE {}/*\n", '127.0.0.1:10200'],
-# qr/^(0|8|64) /m,
-# qr/^([1235679]|1[01345]) |<[^>:]*(?i)(infected|suspicious|unwanted)/m,
-# qr/(?i)<[^>:]*(?:infected|suspicious|unwanted)[^>:]*: ([^>]*)>/m ],
-
-# ### http://www.f-prot.com/
-# ['F-Prot f-protd', # old version
-# \&ask_daemon,
-# ["GET {}/*?-dumb%20-archive%20-packed HTTP/1.0\r\n\r\n",
-# ['127.0.0.1:10200', '127.0.0.1:10201', '127.0.0.1:10202',
-# '127.0.0.1:10203', '127.0.0.1:10204'] ],
-# qr/(?i)<summary[^>]*>clean<\/summary>/m,
-# qr/(?i)<summary[^>]*>infected<\/summary>/m,
-# qr/(?i)<name>(.+)<\/name>/m ],
-
-# ### http://www.sald.com/, http://www.dials.ru/english/, http://www.drweb.ru/
-# ['DrWebD', \&ask_daemon, # DrWebD 4.31 or later
-# [pack('N',1). # DRWEBD_SCAN_CMD
-# pack('N',0x00280001). # DONT_CHANGEMAIL, IS_MAIL, RETURN_VIRUSES
-# pack('N', # path length
-# length("$TEMPBASE/amavis-yyyymmddTHHMMSS-xxxxx/parts/pxxx")).
-# '{}/*'. # path
-# pack('N',0). # content size
-# pack('N',0),
-# '/var/drweb/run/drwebd.sock',
-# # '/var/amavis/var/run/drwebd.sock', # suitable for chroot
-# # '/usr/local/drweb/run/drwebd.sock', # FreeBSD drweb ports default
-# # '127.0.0.1:3000', # or over an inet socket
-# ],
-# qr/\A\x00[\x10\x11][\x00\x10]\x00/sm, # IS_CLEAN,EVAL_KEY; SKIPPED
-# qr/\A\x00[\x00\x01][\x00\x10][\x20\x40\x80]/sm,# KNOWN_V,UNKNOWN_V,V._MODIF
-# qr/\A.{12}(?:infected with )?([^\x00]+)\x00/sm,
-# ],
-# # NOTE: If using amavis-milter, change length to:
-# # length("$TEMPBASE/amavis-milter-xxxxxxxxxxxxxx/parts/pxxx").
-
- ### http://www.kaspersky.com/ (kav4mailservers)
- ['KasperskyLab AVP - aveclient',
- ['/usr/local/kav/bin/aveclient','/usr/local/share/kav/bin/aveclient',
- '/opt/kav/5.5/kav4mailservers/bin/aveclient','aveclient'],
- '-p /var/run/aveserver -s {}/*',
- [0,3,6,8], qr/\b(INFECTED|SUSPICION|SUSPICIOUS)\b/m,
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.+)/m,
- ],
- # NOTE: one may prefer [0],[2,3,4,5], depending on how suspicious,
- # currupted or protected archives are to be handled
-
- ### http://www.kaspersky.com/
- ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp'],
- '-* -P -B -Y -O- {}', [0,3,6,8], [2,4], # any use for -A -K ?
- qr/infected: (.+)/m,
- sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
- sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
- ### The kavdaemon and AVPDaemonClient have been removed from Kasperky
- ### products and replaced by aveserver and aveclient
- ['KasperskyLab AVPDaemonClient',
- [ '/opt/AVP/kavdaemon', 'kavdaemon',
- '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
- '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
- '/opt/AVP/avpdc', 'avpdc' ],
- "-f=$TEMPBASE {}", [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/m ],
- # change the startup-script in /etc/init.d/kavd to:
- # DPARMS="-* -Y -dl -f=/var/amavis /var/amavis"
- # (or perhaps: DPARMS="-I0 -Y -* /var/amavis" )
- # adjusting /var/amavis above to match your $TEMPBASE.
- # The '-f=/var/amavis' is needed if not running it as root, so it
- # can find, read, and write its pid file, etc., see 'man kavdaemon'.
- # defUnix.prf: there must be an entry "*/var/amavis" (or whatever
- # directory $TEMPBASE specifies) in the 'Names=' section.
- # cd /opt/AVP/DaemonClients; configure; cd Sample; make
- # cp AvpDaemonClient /opt/AVP/
- # su - amavis -c "${PREFIX}/kavdaemon ${DPARMS}"
-
- ### http://www.centralcommand.com/
- ['CentralCommand Vexira (new) vascan',
- ['vascan','/usr/lib/Vexira/vascan'],
- "-a s --timeout=60 --temp=$TEMPBASE -y $QUARANTINEDIR ".
- "--log=/var/log/vascan.log {}",
- [0,3], [1,2,5],
- qr/(?x)^\s* (?:virus|iworm|macro|mutant|sequence|trojan)\ found:\ ( [^\]\s']+ )\ \.\.\.\ /m ],
- # Adjust the path of the binary and the virus database as needed.
- # 'vascan' does not allow to have the temp directory to be the same as
- # the quarantine directory, and the quarantine option can not be disabled.
- # If $QUARANTINEDIR is not used, then another directory must be specified
- # to appease 'vascan'. Move status 3 to the second list if password
- # protected files are to be considered infected.
-
- ### http://www.avira.com/
- ### old Avira AntiVir 2.x (ex H+BEDV) or old CentralCommand Vexira Antivirus
- ['Avira AntiVir', ['antivir','vexira'],
- '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/m,
- qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
- (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/m ],
- # NOTE: if you only have a demo version, remove -z and add 214, as in:
- # '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,
-
- ### http://www.avira.com/
- ### Avira for UNIX 3.x
- ['Avira AntiVir', ['avscan'],
- '-s --batch --alert-action=none {}', [0,4], qr/(?:ALERT|FUND):/m,
- qr/(?:ALERT|FUND): (?:.* <<< )?(.+?)(?: ; |$)/m ],
-
- ### http://www.commandsoftware.com/
- ['Command AntiVirus for Linux', 'csav',
- '-all -archive -packed {}', [50], [51,52,53],
- qr/Infection: (.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec CarrierScan via Symantec CommandLineScanner',
- 'cscmdline', '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
- qr/^Files Infected:\s+0$/m, qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
-
- ### http://www.symantec.com/
- ['Symantec AntiVirus Scan Engine',
- 'savsecls', '-server 127.0.0.1:7777 -mode scanrepair -details -verbose {}',
- [0], qr/^Infected\b/m,
- qr/^(?:Info|Virus Name):\s+(.+)/m ],
- # NOTE: check options and patterns to see which entry better applies
-
-# ### http://www.f-secure.com/products/anti-virus/ version 4.65
-# ['F-Secure Antivirus for Linux servers',
-# ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
-# '--delete=no --disinf=no --rename=no --archive=yes --auto=yes '.
-# '--dumb=yes --list=no --mime=yes {}', [0], [3,6,8],
-# qr/(?:infection|Infected|Suspected): (.+)/m ],
-
- ### http://www.f-secure.com/products/anti-virus/ version 5.52
- ['F-Secure Antivirus for Linux servers',
- ['/opt/f-secure/fsav/bin/fsav', 'fsav'],
- '--virus-action1=report --archive=yes --auto=yes '.
- '--dumb=yes --list=no --mime=yes {}', [0], [3,4,6,8],
- qr/(?:infection|Infected|Suspected|Riskware): (.+)/m ],
- # NOTE: internal archive handling may be switched off by '--archive=no'
- # to prevent fsav from exiting with status 9 on broken archives
-
-# ### http://www.avast.com/
-# ['avast! Antivirus daemon',
-# \&ask_daemon, # greets with 220, terminate with QUIT
-# ["SCAN {}\015\012QUIT\015\012", '/var/run/avast4/mailscanner.sock'],
-# qr/\t\[\+\]/m, qr/\t\[L\]\t/m, qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
-# ### http://www.avast.com/
-# ['avast! Antivirus - Client/Server Version', 'avastlite',
-# '-a /var/run/avast4/mailscanner.sock -n {}', [0], [1],
-# qr/\t\[L\]\t([^[ \t\015\012]+)/m ],
-
- ['CAI InoculateIT', 'inocucmd', # retired product
- '-sec -nex {}', [0], [100],
- qr/was infected by virus (.+)/m ],
- # see: http://www.flatmtn.com/computer/Linux-Antivirus_CAI.html
-
- ### http://www3.ca.com/Solutions/Product.asp?ID=156 (ex InoculateIT)
- ['CAI eTrust Antivirus', 'etrust-wrapper',
- '-arc -nex -spm h {}', [0], [101],
- qr/is infected by virus: (.+)/m ],
- # NOTE: requires suid wrapper around inocmd32; consider flag: -mod reviewer
- # see http://marc.theaimsgroup.com/?l=amavis-user&m=109229779912783
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir for Linux (beta)', ['mks32','mks'],
- '-s {}/*', [0], [1,2],
- qr/--[ \t]*(.+)/m ],
-
- ### http://mks.com.pl/english.html
- ['MkS_Vir daemon', 'mksscan',
- '-s -q {}', [0], [1..7],
- qr/^... (\S+)/m ],
-
-# ### http://www.nod32.com/, version v2.52 (old)
-# ['ESET NOD32 for Linux Mail servers',
-# ['/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir --files -z --sfx --rtp --adware --unsafe --pattern --heur '.
-# '-w -a --action-on-infected=accept --action-on-uncleanable=accept '.
-# '--action-on-notscanned=accept {}',
-# [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version v2.7 (old)
-# ['ESET NOD32 Linux Mail Server - command line interface',
-# ['/usr/bin/nod32cli', '/opt/eset/nod32/bin/nod32cli', 'nod32cli'],
-# '--subdir {}', [0,3], [1,2], qr/virus="([^"]+)"/m ],
-
-# ### http://www.eset.com/, version 2.71.12
-# ['ESET Software ESETS Command Line Interface',
-# ['/usr/bin/esets_cli', 'esets_cli'],
-# '--subdir {}', [0], [1,2,3], qr/virus="([^"]+)"/m ],
-
- ### http://www.eset.com/, version 3.0
- ['ESET Software ESETS Command Line Interface',
- ['/usr/bin/esets_cli', 'esets_cli'],
- '--subdir {}', [0], [1,2,3],
- qr/:\s*action="(?!accepted)[^"]*"\n.*:\s*virus="([^"]*)"/m ],
-
- ## http://www.nod32.com/, NOD32LFS version 2.5 and above
- ['ESET NOD32 for Linux File servers',
- ['/opt/eset/nod32/sbin/nod32','nod32'],
- '--files -z --mail --sfx --rtp --adware --unsafe --pattern --heur '.
- '-w -a --action=1 -b {}',
- [0], [1,10], qr/^object=.*, virus="(.*?)",/m ],
-
-# Experimental, based on posting from Rado Dibarbora (Dibo) on 2002-05-31
-# ['ESET Software NOD32 Client/Server (NOD32SS)',
-# \&ask_daemon2, # greets with 200, persistent, terminate with QUIT
-# ["SCAN {}/*\r\n", '127.0.0.1:8448' ],
-# qr/^200 File OK/m, qr/^201 /m, qr/^201 (.+)/m ],
-
- ### http://www.norman.com/products_nvc.shtml
- ['Norman Virus Control v5 / Linux', 'nvcc',
- '-c -l:0 -s -u -temp:$TEMPBASE {}', [0,10,11], [1,2,14],
- qr/(?i).* virus in .* -> \'(.+)\'/m ],
-
- ### http://www.pandasoftware.com/
- ['Panda CommandLineSecure 9 for Linux',
- ['/opt/pavcl/usr/bin/pavcl','pavcl'],
- '-auto -aex -heu -cmp -nbr -nor -nos -eng -nob {}',
- qr/Number of files infected[ .]*: 0+(?!\d)/m,
- qr/Number of files infected[ .]*: 0*[1-9]/m,
- qr/Found virus :\s*(\S+)/m ],
- # NOTE: for efficiency, start the Panda in resident mode with 'pavcl -tsr'
- # before starting amavisd - the bases are then loaded only once at startup.
- # To reload bases in a signature update script:
- # /opt/pavcl/usr/bin/pavcl -tsr -ulr; /opt/pavcl/usr/bin/pavcl -tsr
- # Please review other options of pavcl, for example:
- # -nomalw, -nojoke, -nodial, -nohackt, -nospyw, -nocookies
-
-# ### http://www.pandasoftware.com/
-# ['Panda Antivirus for Linux', ['pavcl'],
-# '-TSR -aut -aex -heu -cmp -nbr -nor -nso -eng {}',
-# [0], [0x10, 0x30, 0x50, 0x70, 0x90, 0xB0, 0xD0, 0xF0],
-# qr/Found virus :\s*(\S+)/m ],
-
-# GeCAD AV technology is acquired by Microsoft; RAV has been discontinued.
-# Check your RAV license terms before fiddling with the following two lines!
-# ['GeCAD RAV AntiVirus 8', 'ravav',
-# '--all --archive --mail {}', [1], [2,3,4,5], qr/Infected: (.+)/m ],
-# # NOTE: the command line switches changed with scan engine 8.5 !
-# # (btw, assigning stdin to /dev/null causes RAV to fail)
-
- ### http://www.nai.com/
- ['NAI McAfee AntiVirus (uvscan)', 'uvscan',
- '--secure -rv --mime --summary --noboot - {}', [0], [13],
- qr/(?x) Found (?:
- \ the\ (.+)\ (?:virus|trojan) |
- \ (?:virus|trojan)\ or\ variant\ ([^ ]+) |
- :\ (.+)\ NOT\ a\ virus)/m,
- # sub {$ENV{LD_PRELOAD}='/lib/libc.so.6'},
- # sub {delete $ENV{LD_PRELOAD}},
- ],
- # NOTE1: with RH9: force the dynamic linker to look at /lib/libc.so.6 before
- # anything else by setting environment variable LD_PRELOAD=/lib/libc.so.6
- # and then clear it when finished to avoid confusing anything else.
- # NOTE2: to treat encrypted files as viruses replace the [13] with:
- # qr/^\s{5,}(Found|is password-protected|.*(virus|trojan))/
-
- ### http://www.virusbuster.hu/en/
- ['VirusBuster', ['vbuster', 'vbengcl'],
- "{} -ss -i '*' -log=$MYHOME/vbuster.log", [0], [1],
- qr/: '(.*)' - Virus/m ],
- # VirusBuster Ltd. does not support the daemon version for the workstation
- # engine (vbuster-eng-1.12-linux-i386-libc6.tgz) any longer. The names of
- # binaries, some parameters AND return codes have changed (from 3 to 1).
- # See also the new Vexira entry 'vascan' which is possibly related.
-
-# ### http://www.virusbuster.hu/en/
-# ['VirusBuster (Client + Daemon)', 'vbengd',
-# '-f -log scandir {}', [0], [3],
-# qr/Virus found = (.*);/m ],
-# # HINT: for an infected file it always returns 3,
-# # although the man-page tells a different story
-
- ### http://www.cyber.com/
- ['CyberSoft VFind', 'vfind',
- '--vexit {}/*', [0], [23], qr/##==>>>> VIRUS ID: CVDL (.+)/m,
- # sub {$ENV{VSTK_HOME}='/usr/lib/vstk'},
- ],
-
- ### http://www.avast.com/
- ['avast! Antivirus', ['/usr/bin/avastcmd','avastcmd'],
- '-a -i -n -t=A {}', [0], [1], qr/\binfected by:\s+([^ \t\n\[\]]+)/m ],
-
- ### http://www.ikarus-software.com/
- ['Ikarus AntiVirus for Linux', 'ikarus',
- '{}', [0], [40], qr/Signature (.+) found/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdscan', # new version
- '--action=ignore --no-list {}', qr/^Infected files\s*:\s*0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files)\s*:\s*0*[1-9]/m,
- qr/(?:suspected|infected)\s*:\s*(.*)(?:\033|$)/m ],
-
- ### http://www.bitdefender.com/
- ['BitDefender', 'bdc', # old version
- '--arc --mail {}', qr/^Infected files *:0+(?!\d)/m,
- qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/m,
- qr/(?:suspected|infected): (.*)(?:\033|$)/m ],
- # consider also: --all --nowarn --alev=15 --flev=15. The --all argument may
- # not apply to your version of bdc, check documentation and see 'bdc --help'
-
- ### ArcaVir for Linux and Unix http://www.arcabit.pl/
- ['ArcaVir for Linux', ['arcacmd','arcacmd.static'],
- '-v 1 -summary 0 -s {}', [0], [1,2],
- qr/(?:VIR|WIR):[ \t]*(.+)/m ],
-
-# ### a generic SMTP-client interface to a SMTP-based virus scanner
-# ['av_smtp', \&ask_av_smtp,
-# ['{}', 'smtp:[127.0.0.1]:5525', 'dummy@localhost'],
-# qr/^2/, qr/^5/, qr/^\s*(.*?)\s*$/m ],
-
-# ['File::Scan', sub {Amavis::AV::ask_av(sub{
-# use File::Scan; my($fn)=@_;
-# my($f)=File::Scan->new(max_txt_size=>0, max_bin_size=>0);
-# my($vname) = $f->scan($fn);
-# $f->error ? (2,"Error: ".$f->error)
-# : ($vname ne '') ? (1,"$vname FOUND") : (0,"Clean")}, @_) },
-# ["{}/*"], [0], [1], qr/^(.*) FOUND$/m ],
-
-# ### fully-fledged checker for JPEG marker segments of invalid length
-# ['check-jpeg',
-# sub { use JpegTester (); Amavis::AV::ask_av(\&JpegTester::test_jpeg, @_) },
-# ["{}/*"], undef, [1], qr/^(bad jpeg: .*)$/m ],
-# # NOTE: place file JpegTester.pm somewhere where Perl can find it,
-# # for example in /usr/local/lib/perl5/site_perl
-
-);
-
-
-@av_scanners_backup = (
-
- ### http://www.clamav.net/ - backs up clamd or Mail::ClamAV
- ['ClamAV-clamscan', 'clamscan',
- "--stdout --no-summary -r --tempdir=$TEMPBASE {}",
- [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
-# ### http://www.clamav.net/ - using remote clamd scanner as a backup
-# ['ClamAV-clamdscan', 'clamdscan',
-# "--stdout --no-summary --config-file=/etc/clamd-client.conf {}",
-# [0], qr/:.*\sFOUND$/m, qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
-# ['ClamAV-clamd-stream',
-# \&ask_daemon, ["*", 'clamd:/var/run/clamav/clamd'],
-# qr/\bOK$/m, qr/\bFOUND$/m,
-# qr/^.*?: (?!Infected Archive)(.*) FOUND$/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon, V6
- ['F-PROT Antivirus for UNIX', ['fpscan'],
- '--report --mount --adware {}', # consider: --applications -s 4 -u 3 -z 10
- [0,8,64], [1,2,3, 4+1,4+2,4+3, 8+1,8+2,8+3, 12+1,12+2,12+3],
- qr/^\[Found\s+[^\]]*\]\s+<([^ \t(>]*)/m ],
-
- ### http://www.f-prot.com/ - backs up F-Prot Daemon (old)
- ['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
- '-dumb -archive -packed {}', [0,8], [3,6], # or: [0], [3,6,8],
- qr/(?:Infection:|security risk named) (.+)|\s+contains\s+(.+)$/m ],
-
- ### http://www.trendmicro.com/ - backs up Trophie
- ['Trend Micro FileScanner', ['/etc/iscan/vscan','vscan'],
- '-za -a {}', [0], qr/Found virus/m, qr/Found virus (.+) in/m ],
-
- ### http://www.sald.com/, http://drweb.imshop.de/ - backs up DrWebD
- ['drweb - DrWeb Antivirus', # security LHA hole in Dr.Web 4.33 and earlier
- ['/usr/local/drweb/drweb', '/opt/drweb/drweb', 'drweb'],
- '-path={} -al -go -ot -cn -upn -ok-',
- [0,32], [1,9,33], qr' infected (?:with|by)(?: virus)? (.*)$'m ],
-
- ### http://www.kaspersky.com/
- ['Kaspersky Antivirus v5.5',
- ['/opt/kaspersky/kav4fs/bin/kav4fs-kavscanner',
- '/opt/kav/5.5/kav4unix/bin/kavscanner',
- '/opt/kav/5.5/kav4mailservers/bin/kavscanner', 'kavscanner'],
- '-i0 -xn -xp -mn -R -ePASBME {}/*', [0,10,15], [5,20,21,25],
- qr/(?:INFECTED|WARNING|SUSPICION|SUSPICIOUS) (.*)/m,
-# sub {chdir('/opt/kav/bin') or die "Can't chdir to kav: $!"},
-# sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
- ],
-
-# Commented out because the name 'sweep' clashes with Debian and FreeBSD
-# package/port of an audio editor. Make sure the correct 'sweep' is found
-# in the path when enabling.
-#
-# ### http://www.sophos.com/ - backs up Sophie or SAVI-Perl
-# ['Sophos Anti Virus (sweep)', 'sweep',
-# '-nb -f -all -rec -ss -sc -archive -cab -mime -oe -tnef '.
-# '--no-reset-atime {}',
-# [0,2], qr/Virus .*? found/m,
-# qr/^>>> Virus(?: fragment)? '?(.*?)'? found/m,
-# ],
-# # other options to consider: -idedir=/usr/local/sav
-
-# Always succeeds and considers mail clean.
-# Potentially useful when all other scanners fail and it is desirable
-# to let mail continue to flow with no virus checking (when uncommented).
-# ['always-clean', sub {0}],
-
-);
-
-
-1; # insure a defined return value
# The documentation is always available at
# http://httpd.apache.org/docs/2.2/
<IfDefine MANUAL>
-AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.22/manual$1"
+AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.22-r1/manual$1"
-<Directory "/usr/share/doc/apache-2.2.22/manual">
+<Directory "/usr/share/doc/apache-2.2.22-r1/manual">
Options Indexes
AllowOverride None
Order allow,deny
--- /dev/null
+<IfDefine SSL>
+<IfDefine SSL_DEFAULT_VHOST>
+<IfModule ssl_module>
+# see bug #178966 why this is in here
+
+# When we also provide SSL we have to listen to the HTTPS port
+# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
+# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
+Listen 443
+
+<VirtualHost _default_:443>
+ ServerName localhost
+ Include /etc/apache2/vhosts.d/default_vhost.include
+ ErrorLog /var/log/apache2/ssl_error_log
+
+ <IfModule log_config_module>
+ TransferLog /var/log/apache2/ssl_access_log
+ </IfModule>
+
+ ## SSL Engine Switch:
+ # Enable/Disable SSL for this virtual host.
+ SSLEngine on
+
+ ## SSL Cipher Suite:
+ # List the ciphers that the client is permitted to negotiate.
+ # See the mod_ssl documentation for a complete list.
+ SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
+
+ ## Server Certificate:
+ # Point SSLCertificateFile at a PEM encoded certificate. If the certificate
+ # is encrypted, then you will be prompted for a pass phrase. Note that a
+ # kill -HUP will prompt again. Keep in mind that if you have both an RSA
+ # and a DSA certificate you can configure both in parallel (to also allow
+ # the use of DSA ciphers, etc.)
+ SSLCertificateFile /etc/ssl/apache2/server.crt
+
+ ## Server Private Key:
+ # If the key is not combined with the certificate, use this directive to
+ # point at the key file. Keep in mind that if you've both a RSA and a DSA
+ # private key you can configure both in parallel (to also allow the use of
+ # DSA ciphers, etc.)
+ SSLCertificateKeyFile /etc/ssl/apache2/server.key
+
+ ## Server Certificate Chain:
+ # Point SSLCertificateChainFile at a file containing the concatenation of
+ # PEM encoded CA certificates which form the certificate chain for the
+ # server certificate. Alternatively the referenced file can be the same as
+ # SSLCertificateFile when the CA certificates are directly appended to the
+ # server certificate for convinience.
+ #SSLCertificateChainFile /etc/ssl/apache2/ca.crt
+
+ ## Certificate Authority (CA):
+ # Set the CA certificate verification path where to find CA certificates
+ # for client authentication or alternatively one huge file containing all
+ # of them (file must be PEM encoded).
+ # Note: Inside SSLCACertificatePath you need hash symlinks to point to the
+ # certificate files. Use the provided Makefile to update the hash symlinks
+ # after changes.
+ #SSLCACertificatePath /etc/ssl/apache2/ssl.crt
+ #SSLCACertificateFile /etc/ssl/apache2/ca-bundle.crt
+
+ ## Certificate Revocation Lists (CRL):
+ # Set the CA revocation path where to find CA CRLs for client authentication
+ # or alternatively one huge file containing all of them (file must be PEM
+ # encoded).
+ # Note: Inside SSLCARevocationPath you need hash symlinks to point to the
+ # certificate files. Use the provided Makefile to update the hash symlinks
+ # after changes.
+ #SSLCARevocationPath /etc/ssl/apache2/ssl.crl
+ #SSLCARevocationFile /etc/ssl/apache2/ca-bundle.crl
+
+ ## Client Authentication (Type):
+ # Client certificate verification type and depth. Types are none, optional,
+ # require and optional_no_ca. Depth is a number which specifies how deeply
+ # to verify the certificate issuer chain before deciding the certificate is
+ # not valid.
+ #SSLVerifyClient require
+ #SSLVerifyDepth 10
+
+ ## Access Control:
+ # With SSLRequire you can do per-directory access control based on arbitrary
+ # complex boolean expressions containing server variable checks and other
+ # lookup directives. The syntax is a mixture between C and Perl. See the
+ # mod_ssl documentation for more details.
+ #<Location />
+ # #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
+ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+ #</Location>
+
+ ## SSL Engine Options:
+ # Set various options for the SSL engine.
+
+ ## FakeBasicAuth:
+ # Translate the client X.509 into a Basic Authorisation. This means that the
+ # standard Auth/DBMAuth methods can be used for access control. The user
+ # name is the `one line' version of the client's X.509 certificate.
+ # Note that no password is obtained from the user. Every entry in the user
+ # file needs this password: `xxj31ZMTZzkVA'.
+
+ ## ExportCertData:
+ # This exports two additional environment variables: SSL_CLIENT_CERT and
+ # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the server
+ # (always existing) and the client (only existing when client
+ # authentication is used). This can be used to import the certificates into
+ # CGI scripts.
+
+ ## StdEnvVars:
+ # This exports the standard SSL/TLS related `SSL_*' environment variables.
+ # Per default this exportation is switched off for performance reasons,
+ # because the extraction step is an expensive operation and is usually
+ # useless for serving static content. So one usually enables the exportation
+ # for CGI and SSI requests only.
+
+ ## StrictRequire:
+ # This denies access when "SSLRequireSSL" or "SSLRequire" applied even under
+ # a "Satisfy any" situation, i.e. when it applies access is denied and no
+ # other module can change it.
+
+ ## OptRenegotiate:
+ # This enables optimized SSL connection renegotiation handling when SSL
+ # directives are used in per-directory context.
+ #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+ <FilesMatch "\.(cgi|shtml|phtml|php)$">
+ SSLOptions +StdEnvVars
+ </FilesMatch>
+
+ <Directory "/var/www/localhost/cgi-bin">
+ SSLOptions +StdEnvVars
+ </Directory>
+
+ ## SSL Protocol Adjustments:
+ # The safe and default but still SSL/TLS standard compliant shutdown
+ # approach is that mod_ssl sends the close notify alert but doesn't wait
+ # for the close notify alert from client. When you need a different
+ # shutdown approach you can use one of the following variables:
+
+ ## ssl-unclean-shutdown:
+ # This forces an unclean shutdown when the connection is closed, i.e. no
+ # SSL close notify alert is send or allowed to received. This violates the
+ # SSL/TLS standard but is needed for some brain-dead browsers. Use this when
+ # you receive I/O errors because of the standard approach where mod_ssl
+ # sends the close notify alert.
+
+ ## ssl-accurate-shutdown:
+ # This forces an accurate shutdown when the connection is closed, i.e. a
+ # SSL close notify alert is send and mod_ssl waits for the close notify
+ # alert of the client. This is 100% SSL/TLS standard compliant, but in
+ # practice often causes hanging connections with brain-dead browsers. Use
+ # this only for browsers where you know that their SSL implementation works
+ # correctly.
+ # Notice: Most problems of broken clients are also related to the HTTP
+ # keep-alive facility, so you usually additionally want to disable
+ # keep-alive for those clients, too. Use variable "nokeepalive" for this.
+ # Similarly, one has to force some clients to use HTTP/1.0 to workaround
+ # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+ # "force-response-1.0" for this.
+ <IfModule setenvif_module>
+ BrowserMatch ".*MSIE.*" \
+ nokeepalive ssl-unclean-shutdown \
+ downgrade-1.0 force-response-1.0
+ </IfModule>
+
+ ## Per-Server Logging:
+ # The home of a custom SSL log file. Use this when you want a compact
+ # non-error SSL logfile on a virtual host basis.
+ <IfModule log_config_module>
+ CustomLog /var/log/apache2/ssl_request_log \
+ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+ </IfModule>
+</VirtualHost>
+</IfModule>
+</IfDefine>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# Virtual Hosts
+#
+# If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+<IfDefine DEFAULT_VHOST>
+# see bug #178966 why this is in here
+
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+# Use name-based virtual hosting.
+NameVirtualHost *:80
+
+# When virtual hosts are enabled, the main host defined in the default
+# httpd.conf configuration will go away. We redefine it here so that it is
+# still available.
+#
+# If you disable this vhost by removing -D DEFAULT_VHOST from
+# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
+# the default.
+<VirtualHost *:80>
+ ServerName localhost
+ Include /etc/apache2/vhosts.d/default_vhost.include
+
+ <IfModule mpm_peruser_module>
+ ServerEnvironment apache apache
+ </IfModule>
+</VirtualHost>
+</IfDefine>
+
+# vim: ts=4 filetype=apache
--- /dev/null
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+ServerAdmin root@localhost
+
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+# If you change this to something that isn't under /var/www then suexec
+# will no longer work.
+DocumentRoot "/var/www/localhost/htdocs"
+
+# This should be changed to whatever you set DocumentRoot to.
+<Directory "/var/www/localhost/htdocs">
+ # Possible values for the Options directive are "None", "All",
+ # or any combination of:
+ # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+ #
+ # Note that "MultiViews" must be named *explicitly* --- "Options All"
+ # doesn't give it to you.
+ #
+ # The Options directive is both complicated and important. Please see
+ # http://httpd.apache.org/docs/2.2/mod/core.html#options
+ # for more information.
+ Options Indexes FollowSymLinks
+
+ # AllowOverride controls what directives may be placed in .htaccess files.
+ # It can be "All", "None", or any combination of the keywords:
+ # Options FileInfo AuthConfig Limit
+ AllowOverride All
+
+ # Controls who can get stuff from this server.
+ Order allow,deny
+ Allow from all
+</Directory>
+
+<IfModule alias_module>
+ # Redirect: Allows you to tell clients about documents that used to
+ # exist in your server's namespace, but do not anymore. The client
+ # will make a new request for the document at its new location.
+ # Example:
+ # Redirect permanent /foo http://www.example.com/bar
+
+ # Alias: Maps web paths into filesystem paths and is used to
+ # access content that does not live under the DocumentRoot.
+ # Example:
+ # Alias /webpath /full/filesystem/path
+ #
+ # If you include a trailing / on /webpath then the server will
+ # require it to be present in the URL. You will also likely
+ # need to provide a <Directory> section to allow access to
+ # the filesystem path.
+
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the target directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
+</IfModule>
+
+# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+<Directory "/var/www/localhost/cgi-bin">
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+# vim: ts=4 filetype=apache
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.05.28.11.50.45; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.10.14.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
-# see bug #178966 why this is in here
-
-# When we also provide SSL we have to listen to the HTTPS port
-# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
-# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
-Listen 443
-#Listen 127.0.0.1:443
-#Listen 85.214.134.152:443
-#Listen [::1]:443
-#Listen [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]:443
-#Listen [fe80::4261:86ff:feec:c1eb]:443
-
-# Use name-based virtual hosting.
-NameVirtualHost *:443
-
-#<VirtualHost _default_:443>
-<VirtualHost *:443>
- ServerName www.brehm-online.com
- Include /etc/apache2/vhosts.d/default_vhost.include
- #Include /etc/apache2/vhosts.d/nagios.include
- ErrorLog /var/log/apache2/ssl_error.log
-
- <IfModule log_config_module>
- #TransferLog /var/log/apache2/ssl_access_log
- CustomLog /var/log/apache2/ssl_access.log full
- </IfModule>
-
- ## SSL Engine Switch:
- # Enable/Disable SSL for this virtual host.
- SSLEngine on
-
- ## SSL Cipher Suite:
- # List the ciphers that the client is permitted to negotiate.
- # See the mod_ssl documentation for a complete list.
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
-
- ## Server Certificate:
- # Point SSLCertificateFile at a PEM encoded certificate. If the certificate
- # is encrypted, then you will be prompted for a pass phrase. Note that a
- # kill -HUP will prompt again. Keep in mind that if you have both an RSA
- # and a DSA certificate you can configure both in parallel (to also allow
- # the use of DSA ciphers, etc.)
- #SSLCertificateFile /etc/ssl/apache2/server.crt
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
-
- ## Server Private Key:
- # If the key is not combined with the certificate, use this directive to
- # point at the key file. Keep in mind that if you've both a RSA and a DSA
- # private key you can configure both in parallel (to also allow the use of
- # DSA ciphers, etc.)
- #SSLCertificateKeyFile /etc/ssl/apache2/server.key
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
-
- ## Server Certificate Chain:
- # Point SSLCertificateChainFile at a file containing the concatenation of
- # PEM encoded CA certificates which form the certificate chain for the
- # server certificate. Alternatively the referenced file can be the same as
- # SSLCertificateFile when the CA certificates are directly appended to the
- # server certificate for convinience.
- #SSLCertificateChainFile /etc/ssl/apache2/ca.crt
-
- ## Certificate Authority (CA):
- # Set the CA certificate verification path where to find CA certificates
- # for client authentication or alternatively one huge file containing all
- # of them (file must be PEM encoded).
- # Note: Inside SSLCACertificatePath you need hash symlinks to point to the
- # certificate files. Use the provided Makefile to update the hash symlinks
- # after changes.
- #SSLCACertificatePath /etc/ssl/apache2/ssl.crt
- #SSLCACertificateFile /etc/ssl/apache2/ca-bundle.crt
-
- ## Certificate Revocation Lists (CRL):
- # Set the CA revocation path where to find CA CRLs for client authentication
- # or alternatively one huge file containing all of them (file must be PEM
- # encoded).
- # Note: Inside SSLCARevocationPath you need hash symlinks to point to the
- # certificate files. Use the provided Makefile to update the hash symlinks
- # after changes.
- #SSLCARevocationPath /etc/ssl/apache2/ssl.crl
- #SSLCARevocationFile /etc/ssl/apache2/ca-bundle.crl
-
- ## Client Authentication (Type):
- # Client certificate verification type and depth. Types are none, optional,
- # require and optional_no_ca. Depth is a number which specifies how deeply
- # to verify the certificate issuer chain before deciding the certificate is
- # not valid.
- #SSLVerifyClient require
- #SSLVerifyDepth 10
-
- ## Access Control:
- # With SSLRequire you can do per-directory access control based on arbitrary
- # complex boolean expressions containing server variable checks and other
- # lookup directives. The syntax is a mixture between C and Perl. See the
- # mod_ssl documentation for more details.
- #<Location />
- # #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
- # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
- # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
- # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
- # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
- # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
- #</Location>
-
- ## SSL Engine Options:
- # Set various options for the SSL engine.
-
- ## FakeBasicAuth:
- # Translate the client X.509 into a Basic Authorisation. This means that the
- # standard Auth/DBMAuth methods can be used for access control. The user
- # name is the `one line' version of the client's X.509 certificate.
- # Note that no password is obtained from the user. Every entry in the user
- # file needs this password: `xxj31ZMTZzkVA'.
-
- ## ExportCertData:
- # This exports two additional environment variables: SSL_CLIENT_CERT and
- # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the server
- # (always existing) and the client (only existing when client
- # authentication is used). This can be used to import the certificates into
- # CGI scripts.
-
- ## StdEnvVars:
- # This exports the standard SSL/TLS related `SSL_*' environment variables.
- # Per default this exportation is switched off for performance reasons,
- # because the extraction step is an expensive operation and is usually
- # useless for serving static content. So one usually enables the exportation
- # for CGI and SSI requests only.
-
- ## StrictRequire:
- # This denies access when "SSLRequireSSL" or "SSLRequire" applied even under
- # a "Satisfy any" situation, i.e. when it applies access is denied and no
- # other module can change it.
-
- ## OptRenegotiate:
- # This enables optimized SSL connection renegotiation handling when SSL
- # directives are used in per-directory context.
- #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <Directory "/var/www/localhost/cgi-bin">
- SSLOptions +StdEnvVars
- </Directory>
-
- ## SSL Protocol Adjustments:
- # The safe and default but still SSL/TLS standard compliant shutdown
- # approach is that mod_ssl sends the close notify alert but doesn't wait
- # for the close notify alert from client. When you need a different
- # shutdown approach you can use one of the following variables:
-
- ## ssl-unclean-shutdown:
- # This forces an unclean shutdown when the connection is closed, i.e. no
- # SSL close notify alert is send or allowed to received. This violates the
- # SSL/TLS standard but is needed for some brain-dead browsers. Use this when
- # you receive I/O errors because of the standard approach where mod_ssl
- # sends the close notify alert.
-
- ## ssl-accurate-shutdown:
- # This forces an accurate shutdown when the connection is closed, i.e. a
- # SSL close notify alert is send and mod_ssl waits for the close notify
- # alert of the client. This is 100% SSL/TLS standard compliant, but in
- # practice often causes hanging connections with brain-dead browsers. Use
- # this only for browsers where you know that their SSL implementation works
- # correctly.
- # Notice: Most problems of broken clients are also related to the HTTP
- # keep-alive facility, so you usually additionally want to disable
- # keep-alive for those clients, too. Use variable "nokeepalive" for this.
- # Similarly, one has to force some clients to use HTTP/1.0 to workaround
- # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
- # "force-response-1.0" for this.
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" \
- nokeepalive ssl-unclean-shutdown \
- downgrade-1.0 force-response-1.0
- </IfModule>
-
- ## Per-Server Logging:
- # The home of a custom SSL log file. Use this when you want a compact
- # non-error SSL logfile on a virtual host basis.
- <IfModule log_config_module>
- CustomLog /var/log/apache2/ssl_request.log \
- "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
- </IfModule>
-</VirtualHost>
-</IfModule>
-</IfDefine>
-</IfDefine>
-
-# vim: ts=4 filetype=apache
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d10 12
-a21 3
-
-<VirtualHost _default_:443>
- ServerName localhost
-d23 2
-a24 1
- ErrorLog /var/log/apache2/ssl_error_log
-d27 2
-a28 1
- TransferLog /var/log/apache2/ssl_access_log
-d46 2
-a47 1
- SSLCertificateFile /etc/ssl/apache2/server.crt
-d54 2
-a55 1
- SSLCertificateKeyFile /etc/ssl/apache2/server.key
-d184 1
-a184 1
- CustomLog /var/log/apache2/ssl_request_log \
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.05.28.11.26.56; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.10.14.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# Virtual Hosts
-#
-# If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at
-# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-<IfDefine DEFAULT_VHOST>
-# see bug #178966 why this is in here
-
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 80
-#Listen 127.0.0.1:80
-#Listen 85.214.134.152:80
-#Listen [::1]:80
-#Listen [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]:80
-#Listen [fe80::4261:86ff:feec:c1eb]:80
-
-# Use name-based virtual hosting.
-NameVirtualHost *:80
-
-# When virtual hosts are enabled, the main host defined in the default
-# httpd.conf configuration will go away. We redefine it here so that it is
-# still available.
-#
-# If you disable this vhost by removing -D DEFAULT_VHOST from
-# /etc/conf.d/apache2, the first defined virtual host elsewhere will be
-# the default.
-<VirtualHost *:80>
- ServerName www.brehm-online.com
- Include /etc/apache2/vhosts.d/default_vhost.include
- #Include /etc/apache2/vhosts.d/nagios.include
-
- <IfModule mpm_peruser_module>
- ServerEnvironment apache apache
- </IfModule>
-</VirtualHost>
-</IfDefine>
-
-# vim: ts=4 filetype=apache
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d27 5
-d44 1
-a44 1
- ServerName localhost
-d46 1
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.10.20.08.45.11; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.12.47.02; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
-
-<VirtualHost *:443>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <Directory "/var/www/localhost/cgi-bin">
- SSLOptions +StdEnvVars
- </Directory>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- ServerName myadmin.brehm-online.com
- ServerAlias myadmin
- ServerAlias myadmin.brehm-online.eu
- ServerAlias myadmin.brehm-berlin.de
-
- DocumentRoot /var/www/myadmin/htdocs
-
- ErrorLog /var/log/apache2/myadmin-error.log
- LogLevel warn
- CustomLog /var/log/apache2/myadmin-access.log full
-
- <IfDefine PHP5>
- php_value session.gc_maxlifetime 3600
- </IfDefine>
-
- <Directory "/var/www/myadmin/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
-# AuthType Basic
-# AuthName "phpMyadmin brehm-online.com"
-# AuthUserFile /etc/apache2/myadmin.passwd
-# Require valid-user
-
- <IfModule mod_php5.c>
-
- #AddType application/x-httpd-php .php
-
- php_flag magic_quotes_gpc Off
- php_flag track_vars On
- php_flag register_globals Off
- #php_value include_path .
-
- # Suhosin dependend ..
- # suhosin.request.max_vars should be increased (eg. 2048)
- php_value suhosin.request.max_vars 2048
- # suhosin.post.max_vars should be increased (eg. 2048)
- php_value suhosin.post.max_vars 2048
- # suhosin.request.max_array_index_length should be increased (eg. 256)
- php_value suhosin.request.max_array_index_length 256
- # suhosin.post.max_array_index_length should be increased (eg. 256)
- php_value suhosin.post.max_array_index_length 256
- # suhosin.request.max_totalname_length should be increased (eg. 8192)
- php_value suhosin.request.max_totalname_length 8192
- # suhosin.post.max_totalname_length should be increased (eg. 8192)
- php_value suhosin.post.max_totalname_length 8192
- # suhosin.sql.bailout_on_error needs to be disabled (the default)
- php_flag suhosin.sql.bailout_on_error off
- # suhosin.log.* should not include SQL, otherwise you get big slowdown
-
- </IfModule>
-
-
- </Directory>
-
-</VirtualHost>
-
-</IfModule>
-</IfDefine>
-</IfDefine>
-
-# vim: ts=4 filetype=apache
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d47 30
-@
+++ /dev/null
-head 1.5;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.5
-date 2011.02.04.11.40.09; author root; state Exp;
-branches;
-next 1.4;
-
-1.4
-date 2010.11.25.08.59.29; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2010.08.13.07.28.35; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.05.28.13.29.15; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.13.23.42; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.5
-log
-@Checked in.
-@
-text
-@<VirtualHost *:80>
-
- ServerName bmrmorph.de
- ServerAlias www.bmrmorph.de
-
- redirect permanent / http://blog.bmrmorph.de/
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
- ServerName ddr.bmrmorph.de
- ServerAlias www.ddr.bmrmorph.de
-
- DocumentRoot /home/morph/htdocs/ddr.bmrmorph.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/ddr.bmrmorph.de">
- Options -Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
- ServerName allianz-der-schattenritter.de
- ServerAlias www.allianz-der-schattenritter.de
-
- DocumentRoot /home/morph/htdocs/allianz-der-schattenritter.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/allianz-der-schattenritter.de">
- Options -Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
- ServerName blog.bmrmorph.de
-
- DocumentRoot /home/morph/htdocs/blog.bmrmorph.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/blog.bmrmorph.de">
- Options -Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
- <Directory "/home/morph/htdocs/blog.bmrmorph.de/wp-content/uploads">
- Options -Indexes FollowSymLinks
- AllowOverride None
- ErrorDocument 403 http://blog.bmrmorph.de/
- RewriteEngine On
- RewriteCond %{HTTP_REFERER} !^http://blog\.bmrmorph\.de/ [NC]
- RewriteRule .*\.(jpg|bmp|png|gif|doc|xls|pdf|xlsx|docx|zip|tar|gz)$ http://blog.bmrmorph.de/ [NC]
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
- ServerName testing.bmrmorph.de
-
- DocumentRoot /home/morph/htdocs/testing.bmrmorph.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/testing.bmrmorph.de">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-# vim: ts=4 filetype=apache
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@d6 1
-a6 1
- DocumentRoot /home/morph/htdocs
-a11 7
- <Directory "/home/morph/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
-d26 1
-a26 1
- Options Indexes FollowSymLinks
-d46 1
-a46 1
- Options Indexes FollowSymLinks
-d56 1
-a56 2
- ServerName reunion.bmrmorph.de
- ServerAlias www.reunion.bmrmorph.de
-d58 1
-a58 1
- DocumentRoot /home/morph/htdocs/reunion.bmrmorph.de
-d64 2
-a65 2
- <Directory "/home/morph/htdocs/reunion.bmrmorph.de">
- Options Indexes FollowSymLinks
-d70 8
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d83 1
-a83 2
- ServerName joomla.bmrmorph.de
- ServerAlias www.joomla.bmrmorph.de
-d85 1
-a85 1
- DocumentRoot /home/morph/htdocs/joomla.bmrmorph.de
-d91 1
-a91 1
- <Directory "/home/morph/htdocs/joomla.bmrmorph.de">
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@a62 40
- ServerName webalizer.bmrmorph.de
- ServerAlias www.webalizer.bmrmorph.de
-
- DocumentRoot /home/morph/htdocs/webalizer.bmrmorph.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/webalizer.bmrmorph.de">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
- ServerName phpmyadmin.bmrmorph.de
- ServerAlias www.phpmyadmin.bmrmorph.de
-
- DocumentRoot /home/morph/htdocs/phpmyadmin.bmrmorph.de
-
- ErrorLog /var/log/apache2/morph-error.log
- LogLevel warn
- CustomLog /var/log/apache2/morph-access.log full
-
- <Directory "/home/morph/htdocs/phpmyadmin.bmrmorph.de">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:80>
-
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d9 1
-d29 1
-d49 1
-d69 1
-d89 1
-d109 1
-d129 1
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.28.13.36.49; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<VirtualHost *:80>
-
- ServerName fotoalbum.brehm-online.com
- ServerAlias fotoalbum.hennig-berlin.org
- ServerAlias fotoalbum.uhu-banane.de
- ServerAlias fotoalbum.uhu-banane.net
- ServerAlias fotoalbum.brehm-online.eu
- ServerAlias fotoalbum
-
- DocumentRoot /var/www/fotoalbum/htdocs
-
- ErrorLog /var/log/apache2/fotoalbum-error.log
- LogLevel warn
- CustomLog /var/log/apache2/fotoalbum-access.log full
-
- <Directory "/var/www/fotoalbum/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- Alias /album_themes "/var/www/localhost/htdocs/album_themes"
- <Directory "/var/www/localhost/htdocs/album_themes">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- ScriptAlias /cgi-bin/ "/var/www/fotoalbum/cgi-bin/"
- <Directory "/var/www/fotoalbum/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.28.13.47.18; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<VirtualHost *:80>
-
- ServerName bautagebuch.brehm-online.com
- ServerAlias bautagebuch.hennig-berlin.org
- ServerAlias bautagebuch.uhu-banane.de
- ServerAlias bautagebuch.uhu-banane.net
- ServerAlias bautagebuch.brehm-online.eu
- ServerAlias bautagebuch
-
- DocumentRoot /var/www/bautagebuch/htdocs
-
- ErrorLog /var/log/apache2/bautagebuch-error.log
- LogLevel warn
- CustomLog /var/log/apache2/bautagebuch-access.log full
-
- <Directory "/var/www/bautagebuch/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- ScriptAlias /cgi-bin/ "/var/www/bautagebuch/cgi-bin/"
- <Directory "/var/www/bautagebuch/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.29.21.41.01; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
-
-<VirtualHost *:443>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <Directory "/var/www/localhost/cgi-bin">
- SSLOptions +StdEnvVars
- </Directory>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- ServerName webmail.brehm-online.com
-# ServerAlias webmail
-# ServerAlias webmail.brehm-online.eu
-# ServerAlias webmail.brehm-berlin.de
-# ServerAlias webmail.hennig-berlin.org
-# ServerAlias webmail.uhu-banane.de
-# ServerAlias webmail.uhu-banane.com
-
-# DocumentRoot /var/www/webmail/htdocs/horde/imp
- DocumentRoot /var/www/webmail/htdocs/horde
-
- Alias /horde/ /var/www/webmail/htdocs/horde/
-# Alias /js/ /var/www/webmail/htdocs/horde/js/
- Alias /gollem/ /var/www/webmail/htdocs/horde/gollem/
- Alias /imp/ /var/www/webmail/htdocs/horde/imp/
- Alias /ingo/ /var/www/webmail/htdocs/horde/ingo/
- Alias /kronolith/ /var/www/webmail/htdocs/horde/kronolith/
- Alias /mnemo/ /var/www/webmail/htdocs/horde/mnemo/
- Alias /nag/ /var/www/webmail/htdocs/horde/nag/
- Alias /passwd/ /var/www/webmail/htdocs/horde/passwd/
- Alias /turba/ /var/www/webmail/htdocs/horde/turba/
-
- ErrorLog /var/log/apache2/webmail-error.log
- LogLevel warn
- CustomLog /var/log/apache2/webmail-access.log full
-
- <IfModule mod_php5.c>
- php_admin_flag engine on
- php_admin_flag magic_quotes_gpc off
- php_admin_flag safe_mode off
- php_admin_flag display_errors off
- php_admin_flag log_errors on
- php_admin_value error_reporting "E_ALL & ~E_NOTICE"
- </IfModule>
-
- <Directory "/var/www/webmail/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- # AuthType Basic
- # AuthName "phpMyadmin brehm-online.com"
- # AuthUserFile /etc/apache2/myadmin.passwd
- # Require valid-user
- </Directory>
-
-</VirtualHost>
-
-<VirtualHost *:443>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <Directory "/var/www/localhost/cgi-bin">
- SSLOptions +StdEnvVars
- </Directory>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- ServerName webmail.brehm-online.eu
- ServerAlias webmail
- ServerAlias webmail.brehm-berlin.de
- ServerAlias webmail.hennig-berlin.org
- ServerAlias webmail.uhu-banane.de
- ServerAlias webmail.uhu-banane.com
-
- DocumentRoot /var/www/webmail/htdocs/horde/imp
-
- Redirect permanent / https://webmail.brehm-online.com/
-
- ErrorLog /var/log/apache2/webmail-error.log
- LogLevel warn
- CustomLog /var/log/apache2/webmail-access-redirect.log full
-
-</VirtualHost>
-
-</IfModule>
-</IfDefine>
-</IfDefine>
-
-<VirtualHost *:80>
-
- ServerName webmail.brehm-online.com
- ServerAlias webmail
- ServerAlias webmail.brehm-online.eu
- ServerAlias webmail.brehm-berlin.de
- ServerAlias webmail.hennig-berlin.org
- ServerAlias webmail.uhu-banane.de
- ServerAlias webmail.uhu-banane.com
-
- DocumentRoot /var/www/webmail/htdocs/horde/imp
-
- Redirect permanent / https://webmail.brehm-online.com/
-
- ErrorLog /var/log/apache2/webmail-error.log
- LogLevel warn
- CustomLog /var/log/apache2/webmail-access-redirect.log full
-
-</VirtualHost>
-
-
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.06.17.19.54.00; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2007.12.02.14.58.10; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@<VirtualHost *:80>
-
- ServerName ldap.brehm-online.com
- ServerAlias ldap
- ServerAlias ldap.brehm-online.eu
- ServerAlias ldap.brehm-berlin.de
-
- DocumentRoot /var/www/ldap/htdocs/htdocs
-
- ErrorLog /var/log/apache2/ldap-error.log
- LogLevel warn
- CustomLog /var/log/apache2/ldap-access.log full
-
- <Directory "/var/www/ldap/htdocs/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
-# AuthType Basic
-# AuthName "phpldapadmin brehm-online.com"
-# AuthUserFile /etc/apache2/myadmin.passwd
-# Require valid-user
- </Directory>
-
-</VirtualHost>
-
-<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
-
-<VirtualHost *:443>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- ServerName ldap.brehm-online.com
- ServerAlias ldap
- ServerAlias ldap.brehm-online.eu
- ServerAlias ldap.brehm-berlin.de
-
- DocumentRoot /var/www/ldap/htdocs/htdocs
-
- ErrorLog /var/log/apache2/ldap-error.log
- LogLevel warn
- CustomLog /var/log/apache2/ldap-access.log full
-
- <Directory "/var/www/ldap/htdocs/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
-# AuthType Basic
-# AuthName "phpldapadmin brehm-online.com"
-# AuthUserFile /etc/apache2/myadmin.passwd
-# Require valid-user
- </Directory>
-
-</VirtualHost>
-
-</IfModule>
-</IfDefine>
-</IfDefine>
-
-
-
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d11 1
-d53 1
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.11.02.19.49.03; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.30.07.35.31; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@<VirtualHost *:80>
-
- ServerName kfz-dlb.uhu-banane.net
- ServerAlias kfz-dlb.uhu-banane.de
- ServerAlias kfz-dlb.brehm-online.com
- ServerAlias kfz-dlb.brehm-online.eu
- ServerAlias www.kfz-dlb.uhu-banane.net
- ServerAlias www.kfz-dlb.uhu-banane.de
- ServerAlias www.kfz-dlb.brehm-online.com
- ServerAlias www.kfz-dlb.brehm-online.eu
-
- DocumentRoot /var/www/kfz-dlb/htdocs
-
- ErrorLog /var/log/apache2/kfz-dlb-error.log
- CustomLog /var/log/apache2/kfz-dlb-access.log full
-
- Alias /uploads "/var/www/kfz-dlb/htdocs/uploads"
-
- <Directory "/var/www/kfz-dlb/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- <IfDefine PHP5>
- php_flag session.auto_start Off
- php_value default_charset "utf-8"
- php_value upload_max_filesize "15M"
- php_admin_flag allow_url_fopen off
- php_flag register_globals off
- php_flag register_argc_argv off
- php_flag magic_quotes_gpc off
- php_value variables_order "GPCS"
- # php_value error_reporting "E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR"
- php_value error_reporting "4177"
- </IfDefine>
-
-</VirtualHost>
-
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d27 3
-a29 3
- php_flag session.auto_start Off
- php_value default_charset "utf-8"
- php_value upload_max_filesize "15M"
-d31 6
-a36 4
- php_flag register_globals off
- php_flag register_argc_argv off
- php_flag magic_quotes_gpc off
- php_value variables_order "GPCS"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.03.25.19.14.06; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<IfDefine FASTCGI>
- <VirtualHost *:80>
- Include /etc/apache2/vhosts.d/books_vhost.include
- </VirtualHost>
-</IfDefine>
-
-# vim: ts=4 filetype=apache expandtab fileencoding=utf-8
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.03.25.19.22.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<IfDefine FASTCGI>
-<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
- <VirtualHost *:443>
- Include /etc/apache2/vhosts.d/books_vhost.include
- <IfModule log_config_module>
- #TransferLog /var/log/apache2/ssl_access_log
- CustomLog /var/log/apache2/ssl_access.log full
- </IfModule>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
-
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <Directory "/var/www/localhost/cgi-bin">
- SSLOptions +StdEnvVars
- </Directory>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- <IfModule log_config_module>
- CustomLog /var/log/apache2/ssl_request.log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
- </IfModule>
- </VirtualHost>
-</IfModule>
-</IfDefine>
-</IfDefine>
-</IfDefine>
-
-# vim: ts=4 filetype=apache expandtab fileencoding=utf-8
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.30.07.15.57; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@<IfDefine SSL>
-<IfDefine SSL_DEFAULT_VHOST>
-<IfModule ssl_module>
-
-<VirtualHost *:443>
-
- SSLEngine on
- SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
- SSLCertificateFile /etc/apache2/ssl/myadmin-cert.pem
- SSLCertificateKeyFile /etc/apache2/ssl/myadmin-cert.pem
- <FilesMatch "\.(cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
-
- <IfModule alias_module>
- ScriptAlias /cgi-bin/ "/var/www/dyndns/cgi-bin/"
- </IfModule>
-
- <Directory "/var/www/dyndns/cgi-bin">
- SSLOptions +StdEnvVars
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
- <IfModule setenvif_module>
- BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
- </IfModule>
-
- ServerName dyndns.uhu-banane.de
- ServerAlias dyndns
- ServerAlias dyndns.brehm-online.eu
- ServerAlias dyndns.brehm-berlin.de
- ServerAlias dyndns.brehm-online.com
- ServerAlias dyndns.uhu-banane.net
-
- DocumentRoot /var/www/dyndns/htdocs
-
- ErrorLog /var/log/apache2/dyndns-error.log
- LogLevel warn
- CustomLog /var/log/apache2/dyndns-access.log full
-
- <Directory "/var/www/dyndns/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
-
-
-</VirtualHost>
-
-</IfModule>
-</IfDefine>
-</IfDefine>
-
-
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.03.25.19.47.39; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@ServerName books.brehm-online.com
-ServerAlias books
-ServerAlias buecher
-ServerAlias buecher.brehm-online.com
-ServerAlias books.brehm-berlin.de
-ServerAlias buecher.brehm-berlin.de
-ServerAlias books.brehm-online.eu
-ServerAlias buecher.brehm-online.eu
-
-#FastCgiExternalServer /tmp/frbr_books1_app.fcgi -socket /tmp/frbr_books_app.sock
-
-DocumentRoot /var/www/books/root
-Alias /static /var/www/books/root/static
-Alias / /tmp/frbr_books_app.fcgi/
-
-ErrorLog /var/log/apache2/books-error.log
-LogLevel info
-CustomLog /var/log/apache2/books-access.log full
-
-<Location "/">
- #AllowOverride None
- Options None
- Order allow,deny
- Allow from all
-</Location>
-
-# vim: filetype=apache ts=4 expandtab fileencoding=utf-8
-@
+++ /dev/null
-head 1.5;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.5
-date 2011.03.25.19.03.28; author root; state Exp;
-branches;
-next 1.4;
-
-1.4
-date 2010.08.20.05.30.45; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2010.06.07.20.36.11; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.05.28.11.43.29; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.10.14.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.5
-log
-@Checked in.
-@
-text
-@# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents. e.g. admin@@your-domain.com
-#ServerAdmin root@@localhost
-ServerAdmin frank@@brehm-online.com
-
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-# If you change this to something that isn't under /var/www then suexec
-# will no longer work.
-DocumentRoot "/var/www/localhost/htdocs"
-
-# This should be changed to whatever you set DocumentRoot to.
-<Directory "/var/www/localhost/htdocs">
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.2/mod/core.html#options
- # for more information.
- Options Indexes FollowSymLinks
-
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # Options FileInfo AuthConfig Limit
- AllowOverride All
-
- # Controls who can get stuff from this server.
- Order allow,deny
- Allow from all
-</Directory>
-
-<IfModule alias_module>
- # Redirect: Allows you to tell clients about documents that used to
- # exist in your server's namespace, but do not anymore. The client
- # will make a new request for the document at its new location.
- # Example:
- # Redirect permanent /foo http://www.example.com/bar
-
- # Alias: Maps web paths into filesystem paths and is used to
- # access content that does not live under the DocumentRoot.
- # Example:
- # Alias /webpath /full/filesystem/path
- #
- # If you include a trailing / on /webpath then the server will
- # require it to be present in the URL. You will also likely
- # need to provide a <Directory> section to allow access to
- # the filesystem path.
-
- Alias /distfiles/ /usr/portage/distfiles/
-
- <Directory "/usr/portage/distfiles">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- Redirect permanent /FotoAlbum http://fotoalbum.brehm-online.com
- Redirect permanent /fotoalbum http://fotoalbum.brehm-online.com
- Redirect permanent /Foto_Album http://fotoalbum.brehm-online.com
- Redirect permanent /foto_album http://fotoalbum.brehm-online.com
- Redirect permanent /Foto-Album http://fotoalbum.brehm-online.com
- Redirect permanent /foto-album http://fotoalbum.brehm-online.com
-
- Alias /Neues_Haus /home/frank/docs/Neues_Haus
- Alias /neues_haus /home/frank/docs/Neues_Haus
- Alias /Neues-Haus /home/frank/docs/Neues_Haus
- Alias /neues-haus /home/frank/docs/Neues_Haus
- Alias /NeuesHaus /home/frank/docs/Neues_Haus
- Alias /neueshaus /home/frank/docs/Neues_Haus
-
- <Directory "/home/frank/docs/Neues_Haus">
- Options Indexes FollowSymLinks
- # IndexOptions FancyIndexing FoldersFirst IgnoreCase NameWidth=60
- # IndexOptions FancyIndexing FoldersFirst HTMLTable IgnoreCase NameWidth=50
- # AddDefaultCharset utf-8
- AddDefaultCharset utf-8
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- Alias /oreilly /var/lib/backup-once/oreilly
- <Directory "/var/lib/backup-once/oreilly">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the target directory are treated as applications and
- # run by the server when requested rather than as documents sent to the
- # client. The same rules about trailing "/" apply to ScriptAlias
- # directives as to Alias.
- ScriptAlias /cgi-bin/ "/var/www/localhost/cgi-bin/"
-
- <IfDefine FASTCGI>
- Alias /books/static /var/www/books/root/static
- Alias /books/ /tmp/frbr_books_app.fcgi/
- #Alias /books/ /var/www/books/script/frbr_books_fastcgi.pl/
- <Location "/books/">
- #AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Location>
- </IfDefine>
-
- Alias /repo-browser/books/ /home/frank/devel/books/repo-browser/
- <Directory "/home/frank/devel/books/repo-browser">
- Options Indexes FollowSymLinks
- Allow from all
- </Directory>
-
-</IfModule>
-
-# "/var/www/localhost/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-<Directory "/var/www/localhost/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
-</Directory>
-
-# vim: filetype=apache ts=4 expandtab fileencoding=utf-8
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@d17 20
-a36 20
- # Possible values for the Options directive are "None", "All",
- # or any combination of:
- # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- # The Options directive is both complicated and important. Please see
- # http://httpd.apache.org/docs/2.2/mod/core.html#options
- # for more information.
- Options Indexes FollowSymLinks
-
- # AllowOverride controls what directives may be placed in .htaccess files.
- # It can be "All", "None", or any combination of the keywords:
- # Options FileInfo AuthConfig Limit
- AllowOverride All
-
- # Controls who can get stuff from this server.
- Order allow,deny
- Allow from all
-d40 21
-a60 21
- # Redirect: Allows you to tell clients about documents that used to
- # exist in your server's namespace, but do not anymore. The client
- # will make a new request for the document at its new location.
- # Example:
- # Redirect permanent /foo http://www.example.com/bar
-
- # Alias: Maps web paths into filesystem paths and is used to
- # access content that does not live under the DocumentRoot.
- # Example:
- # Alias /webpath /full/filesystem/path
- #
- # If you include a trailing / on /webpath then the server will
- # require it to be present in the URL. You will also likely
- # need to provide a <Directory> section to allow access to
- # the filesystem path.
-
- Alias /distfiles/ /usr/portage/distfiles/
-
- <Directory "/usr/portage/distfiles">
- Options Indexes FollowSymLinks
- AllowOverride All
-d135 1
-a135 1
-# vim: ts=4 filetype=apache
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d90 8
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d98 11
-a108 10
-# <IfDefine FASTCGI>
-# Alias /books/static /var/www/books/root/static
-# Alias /books/ /var/www/books/script/frbr_books_fastcgi.pl/
-# <Location "/books/">
-# #AllowOverride None
-# Options None
-# Order allow,deny
-# Allow from all
-# </Location>
-# </IfDefine>
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d4 2
-a5 1
-ServerAdmin root@@localhost
-d56 34
-d97 18
-@
-<VirtualHost *:80>
-
- ServerName bautagebuch.brehm-online.com
- ServerAlias bautagebuch.hennig-berlin.org
- ServerAlias bautagebuch.uhu-banane.de
- ServerAlias bautagebuch.uhu-banane.net
- ServerAlias bautagebuch.brehm-online.eu
- ServerAlias bautagebuch
-
- DocumentRoot /var/www/bautagebuch/htdocs
-
- ErrorLog /var/log/apache2/bautagebuch-error.log
- LogLevel warn
- CustomLog /var/log/apache2/bautagebuch-access.log full
-
- <Directory "/var/www/bautagebuch/htdocs">
- Options Indexes FollowSymLinks
- AllowOverride All
- Order allow,deny
- Allow from all
- </Directory>
-
- ScriptAlias /cgi-bin/ "/var/www/bautagebuch/cgi-bin/"
- <Directory "/var/www/bautagebuch/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
-</VirtualHost>
+#<VirtualHost *:80>
+#
+# ServerName bautagebuch.brehm-online.com
+# ServerAlias bautagebuch.hennig-berlin.org
+# ServerAlias bautagebuch.uhu-banane.de
+# ServerAlias bautagebuch.uhu-banane.net
+# ServerAlias bautagebuch.brehm-online.eu
+# ServerAlias bautagebuch
+#
+# DocumentRoot /var/www/bautagebuch/htdocs
+#
+# ErrorLog /var/log/apache2/bautagebuch-error.log
+# LogLevel warn
+# CustomLog /var/log/apache2/bautagebuch-access.log full
+#
+# <Directory "/var/www/bautagebuch/htdocs">
+# Options Indexes FollowSymLinks
+# AllowOverride All
+# Order allow,deny
+# Allow from all
+# </Directory>
+#
+# ScriptAlias /cgi-bin/ "/var/www/bautagebuch/cgi-bin/"
+# <Directory "/var/www/bautagebuch/cgi-bin">
+# AllowOverride None
+# Options None
+# Order allow,deny
+# Allow from all
+# </Directory>
+#
+#</VirtualHost>
remote_server =
port = 60
+##local_port =
transport = tcp
+queue_file = /var/spool/audit/remote.log
mode = immediate
-queue_depth = 20
-fail_action = SYSLOG
+queue_depth = 2048
+format = managed
+network_retry_time = 1
+max_tries_per_record = 3
+max_time_per_record = 5
+heartbeat_timeout = 0
+network_failure_action = stop
+disk_low_action = ignore
+disk_full_action = ignore
+disk_error_action = syslog
+remote_ending_action = suspend
+generic_error_action = syslog
+generic_warning_action = syslog
+overflow_action = syslog
+
+##enable_krb5 = no
+##krb5_principal =
+##krb5_client_name = auditd
+##krb5_key_file = /etc/audisp/audisp-remote.key
# dispatcher daemon, audispd.
#
-q_depth = 80
+q_depth = 120
overflow_action = SYSLOG
priority_boost = 4
+max_restarts = 10
name_format = HOSTNAME
#name = mydomain
# plugin can take 2 arguments, the path for the
# socket and the socket permissions in octal.
-active = yes
+active = no
direction = out
path = builtin_af_unix
type = builtin
-# This file controls the configuration of the
-# syslog plugin. It simply takes events and writes
-# them to syslog.
+# This file controls the configuration of the syslog plugin.
+# It simply takes events and writes them to syslog. The
+# arguments provided can be the default priority that you
+# want the events written with. And optionally, you can give
+# a second argument indicating the facility that you want events
+# logged to. Valid options are LOG_LOCAL0 through 7.
active = no
direction = out
-# Copyright 1999-2005 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules,v 1.1 2006/06/22 07:41:46 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules-2.1.3,v 1.1 2011/09/11 02:58:55 robbat2 Exp $
#
# This file contains the auditctl rules that are loaded
# whenever the audit daemon is started via the initscripts.
# Feel free to add below this line. See auditctl man page
# The following rule would cause all of the syscalls listed to be ignored in logging.
-# -a entry,never -S read -S write -S open -S fstat -S fstat64 -S mmap -S brk -S munmap -S _llseek -S nanosleep -S fcntl64 -S close -S dup2 -S rt_sigaction -S stat64 -S stat
+-a exit,never -F arch=b32 -S read -S write -S open -S fstat -S mmap -S brk -S munmap -S nanosleep -S fcntl -S close -S dup2 -S rt_sigaction -S stat
+-a exit,never -F arch=b64 -S read -S write -S open -S fstat -S mmap -S brk -S munmap -S nanosleep -S fcntl -S close -S dup2 -S rt_sigaction -S stat
# The following rule would cause the capture of all systems not caught above.
-# -a entry,always -S all
+# -a exit,always -S all
# Increase the buffers to survive stress events
--b 256
+-b 8192
# vim:ft=conf:
-# Copyright 1999-2005 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules.stop.pre,v 1.1 2006/06/22 07:41:46 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules.stop.pre,v 1.2 2011/09/11 02:58:55 robbat2 Exp $
#
# This file contains the auditctl rules that are loaded immediately before the
# audit deamon is stopped via the initscripts.
# auditd is stopping, don't capture events anymore
-D
+# Disable kernel generating audit events
+-e 0
+
# vim:ft=conf:
priority_boost = 4
flush = INCREMENTAL
freq = 20
-num_logs = 4
+num_logs = 5
disp_qos = lossy
dispatcher = /sbin/audispd
name_format = NONE
##name = mydomain
-max_log_file = 5
+max_log_file = 6
max_log_file_action = ROTATE
space_left = 75
space_left_action = SYSLOG
admin_space_left_action = SUSPEND
disk_full_action = SUSPEND
disk_error_action = SUSPEND
-
+##tcp_listen_port =
+tcp_listen_queue = 5
+tcp_max_per_addr = 1
+##tcp_client_ports = 1024-65535
+tcp_client_max_idle = 0
+enable_krb5 = no
+krb5_principal = auditd
+##krb5_key_file = /etc/audit/audit.key
--- /dev/null
+#
+# Sample auto.master file
+# This is an automounter map and it has the following format
+# key [ -mount-options-separated-by-comma ] location
+# For details of the format look at autofs(5).
+#
+/misc /etc/auto.misc
+#
+# NOTE: mounts done from a hosts map will be mounted with the
+# "nosuid" and "nodev" options unless the "suid" and "dev"
+# options are explicitly given.
+#
+/net -hosts
+#
+# Include central master map if it can be found using
+# nsswitch sources.
+#
+# Note that if there are entries for /net or /misc (as
+# above) in the included master map any keys that are the
+# same will not be seen as the first read key seen takes
+# precedence.
+#
++auto.master
--- /dev/null
+#
+# This is an automounter map and it has the following format
+# key [ -mount-options-separated-by-comma ] location
+# Details may be found in the autofs(5) manpage
+
+cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
+
+# the following entries are samples to pique your imagination
+#linux -ro,soft,intr ftp.example.org:/pub/linux
+#boot -fstype=ext2 :/dev/hda1
+#floppy -fstype=auto :/dev/fd0
+#floppy -fstype=ext2 :/dev/fd0
+#e2floppy -fstype=ext2 :/dev/fd0
+#jaz -fstype=ext2 :/dev/sdc1
+#removable -fstype=ext2 :/dev/hdd
--- /dev/null
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+# Look at what a host is exporting to determine what we can mount.
+# This is very simple, but it appears to work surprisingly well
+
+key="$1"
+
+# add "nosymlink" here if you want to suppress symlinking local filesystems
+# add "nonstrict" to make it OK for some filesystems to not mount
+opts="-fstype=nfs,hard,intr,nodev,nosuid"
+
+# Showmount comes in a number of names and varieties. "showmount" is
+# typically an older version which accepts the '--no-headers' flag
+# but ignores it. "kshowmount" is the newer version installed with knfsd,
+# which both accepts and acts on the '--no-headers' flag.
+#SHOWMOUNT="kshowmount --no-headers -e $key"
+#SHOWMOUNT="showmount -e $key | tail -n +2"
+
+for P in /bin /sbin /usr/bin /usr/sbin
+do
+ for M in showmount kshowmount
+ do
+ if [ -x $P/$M ]
+ then
+ SMNT=$P/$M
+ break
+ fi
+ done
+done
+
+[ -x $SMNT ] || exit 1
+
+# Newer distributions get this right
+SHOWMOUNT="$SMNT --no-headers -e $key"
+
+$SHOWMOUNT | LC_ALL=C sort -k 1 | \
+ awk -v key="$key" -v opts="$opts" -- '
+ BEGIN { ORS=""; first=1 }
+ { if (first) { print opts; first=0 }; print " \\\n\t" $1, key ":" $1 }
+ END { if (!first) print "\n"; else exit 1 }
+ ' | sed 's/#/\\#/g'
--- /dev/null
+#!/bin/bash
+
+# This file must be executable to work! chmod 755!
+
+key="$1"
+opts="-fstype=cifs"
+
+for P in /bin /sbin /usr/bin /usr/sbin
+do
+ if [ -x $P/smbclient ]
+ then
+ SMBCLIENT=$P/smbclient
+ break
+ fi
+done
+
+[ -x $SMBCLIENT ] || exit 1
+
+$SMBCLIENT -gNL $key 2>/dev/null| awk -v key="$key" -v opts="$opts" -F'|' -- '
+ BEGIN { ORS=""; first=1 }
+ /Disk/ {
+ if (first)
+ print opts; first=0
+ dir = $2
+ loc = $2
+ # Enclose mount dir and location in quotes
+ # Double quote "$" in location as it is special
+ gsub(/\$$/, "\\$", loc);
+ gsub(/\&/,"\\\\&",loc)
+ print " \\\n\t \"/" dir "\"", "\"://" key "/" loc "\""
+ }
+ END { if (!first) print "\n"; else exit 1 }
+ '
+
--- /dev/null
+<?xml version="1.0" ?>
+<!--
+This files contains a single entry with multiple attributes tied to it.
+See autofs_ldap_auth.conf(5) for more information.
+-->
+
+<autofs_ldap_sasl_conf
+ usetls="no"
+ tlsrequired="no"
+ authrequired="no"
+/>
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.05.25.13.31.55; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.25.08.08.20; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# /etc/bash/bashrc
-#
-# This file is sourced by all *interactive* bash shells on startup,
-# including some apparently interactive shells such as scp and rcp
-# that can't tolerate any output. So make sure this doesn't display
-# anything or bad things will happen !
-
-
-if [ -d /usr/scripts ] ; then
- PATH=/usr/scripts:$PATH
- export PATH
-fi
-
-if [ -d $HOME/bin ] ; then
- PATH=$PATH:$HOME/bin
- export PATH
-fi
-
-if [ -d $HOME/lib ] ; then
- PERL5LIB=$HOME/lib
- export PERL5LIB
-fi
-
-# Test for an interactive shell. There is no need to set anything
-# past this point for scp and rcp, and it's important to refrain from
-# outputting anything in those cases.
-if [[ $- != *i* ]] ; then
- # Shell is non-interactive. Be done now!
- return
-fi
-
-# Bash won't get SIGWINCH if another process is in the foreground.
-# Enable checkwinsize so that bash will check the terminal size when
-# it regains control. #65623
-# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
-shopt -s checkwinsize
-
-# Enable history appending instead of overwriting. #139609
-shopt -s histappend
-
-# Change the window title of X terminals
-case ${TERM} in
- xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
- ;;
- screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
- ;;
-esac
-
-use_color=false
-
-# Set colorful PS1 only on colorful terminals.
-# dircolors --print-database uses its own built-in database
-# instead of using /etc/DIR_COLORS. Try to use the external file
-# first to take advantage of user additions. Use internal bash
-# globbing instead of external grep binary.
-safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
-match_lhs=""
-[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
-[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
-[[ -z ${match_lhs} ]] \
- && type -P dircolors >/dev/null \
- && match_lhs=$(dircolors --print-database)
-[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
-
-if ${use_color} ; then
- # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
- if type -P dircolors >/dev/null ; then
- if [[ -f ~/.dir_colors ]] ; then
- eval $(dircolors -b ~/.dir_colors)
- elif [[ -f /etc/DIR_COLORS ]] ; then
- eval $(dircolors -b /etc/DIR_COLORS)
- fi
- fi
-
- if [[ ${EUID} == 0 ]] ; then
- #PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
- PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]'
- #PS1='$? \[\033[01;31m\]Gentoo (chroot)\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]'
- else
- #PS1='\[\033[01;32m\]\u@@\h\[\033[01;34m\] \w \$\[\033[00m\] '
- PS1='$? \[\033[01;32m\]\u@@\h\[\033[01;30m\]:\[\033[01;34m\]\w > \[\033[00m\]'
- fi
-
- alias ls='ls --color=auto'
- #alias grep='grep --colour=auto'
-else
- if [[ ${EUID} == 0 ]] ; then
- # show root@@ when we don't have colors
- PS1='\u@@\h \W \$ '
- else
- PS1='\u@@\h \w \$ '
- fi
-fi
-
-if [[ ${EUID} == 0 ]] ; then
- alias ll="ls -lA"
-else
- alias ll="ls -l"
-fi
-alias la="ls -la"
-alias md=mkdir
-alias rd=rmdir
-alias ..='cd ..'
-alias ...='cd ../..'
-alias cd..='cd ..'
-alias cd...='cd ../..'
-alias pl="ps -fu $USER"
-grep='grep --colour=auto'
-alias cpwd='cd `realpath .`'
-
-HISTCONTROL=ignoreboth
-HISTSIZE=5000
-HISTFILESIZE=5000
-HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S '
-
-# Change the window title of X terminals
-case $TERM in
- xterm*|rxvt|Eterm|eterm)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
- ;;
- screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
- ;;
-esac
-
-if [ -f /usr/share/mc/mc.gentoo ]; then
- . /usr/share/mc/mc.gentoo
-fi
-
-if [ -f /etc/profile.d/bash-completion ]; then
- . /etc/profile.d/bash-completion
-fi
-
-
-
-# Try to keep environment pollution down, EPA loves us.
-unset use_color safe_term match_lhs
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d9 15
-d78 3
-a80 1
- PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
-d82 2
-a83 1
- PS1='\[\033[01;32m\]\u@@\h\[\033[01;34m\] \w \$\[\033[00m\] '
-d87 1
-a87 1
- alias grep='grep --colour=auto'
-d97 41
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.25.08.08.20; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/bash/bashrc
-#
-# This file is sourced by all *interactive* bash shells on startup,
-# including some apparently interactive shells such as scp and rcp
-# that can't tolerate any output. So make sure this doesn't display
-# anything or bad things will happen !
-
-
-# Test for an interactive shell. There is no need to set anything
-# past this point for scp and rcp, and it's important to refrain from
-# outputting anything in those cases.
-if [[ $- != *i* ]] ; then
- # Shell is non-interactive. Be done now!
- return
-fi
-
-# Bash won't get SIGWINCH if another process is in the foreground.
-# Enable checkwinsize so that bash will check the terminal size when
-# it regains control. #65623
-# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
-shopt -s checkwinsize
-
-# Enable history appending instead of overwriting. #139609
-shopt -s histappend
-
-# Change the window title of X terminals
-case ${TERM} in
- xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
- ;;
- screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
- ;;
-esac
-
-use_color=false
-
-# Set colorful PS1 only on colorful terminals.
-# dircolors --print-database uses its own built-in database
-# instead of using /etc/DIR_COLORS. Try to use the external file
-# first to take advantage of user additions. Use internal bash
-# globbing instead of external grep binary.
-safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
-match_lhs=""
-[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
-[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
-[[ -z ${match_lhs} ]] \
- && type -P dircolors >/dev/null \
- && match_lhs=$(dircolors --print-database)
-[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
-
-if ${use_color} ; then
- # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
- if type -P dircolors >/dev/null ; then
- if [[ -f ~/.dir_colors ]] ; then
- eval $(dircolors -b ~/.dir_colors)
- elif [[ -f /etc/DIR_COLORS ]] ; then
- eval $(dircolors -b /etc/DIR_COLORS)
- fi
- fi
-
- if [[ ${EUID} == 0 ]] ; then
- PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
- else
- PS1='\[\033[01;32m\]\u@@\h\[\033[01;34m\] \w \$\[\033[00m\] '
- fi
-
- alias ls='ls --color=auto'
- alias grep='grep --colour=auto'
-else
- if [[ ${EUID} == 0 ]] ; then
- # show root@@ when we don't have colors
- PS1='\u@@\h \W \$ '
- else
- PS1='\u@@\h \w \$ '
- fi
-fi
-
-# Try to keep environment pollution down, EPA loves us.
-unset use_color safe_term match_lhs
-@
if [ -d /usr/scripts ] ; then
- PATH=/usr/scripts:$PATH
- export PATH
+ PATH=/usr/scripts:$PATH
+ export PATH
fi
if [ -d $HOME/bin ] ; then
- PATH=$PATH:$HOME/bin
- export PATH
+ PATH=$PATH:$HOME/bin
+ export PATH
fi
if [ -d $HOME/lib ] ; then
- PERL5LIB=$HOME/lib
- export PERL5LIB
+ PERL5LIB=$HOME/lib
+ export PERL5LIB
fi
# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.
if [[ $- != *i* ]] ; then
- # Shell is non-interactive. Be done now!
- return
+ # Shell is non-interactive. Be done now!
+ return
fi
# Bash won't get SIGWINCH if another process is in the foreground.
# Change the window title of X terminals
case ${TERM} in
- xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
- ;;
- screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
- ;;
+ xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
+ ;;
+ screen)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
+ ;;
esac
use_color=false
[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
[[ -z ${match_lhs} ]] \
- && type -P dircolors >/dev/null \
- && match_lhs=$(dircolors --print-database)
+ && type -P dircolors >/dev/null \
+ && match_lhs=$(dircolors --print-database)
[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
if ${use_color} ; then
HISTCONTROL=ignoreboth
-HISTSIZE=5000
-HISTFILESIZE=5000
+HISTSIZE=50000
+HISTFILESIZE=50000
HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S '
export LESSCOLOR=yes
+export LESSCHARSET="utf-8"
# Change the window title of X terminals
case $TERM in
. /usr/share/mc/mc.gentoo
fi
-if [ -f /etc/profile.d/bash-completion ]; then
- . /etc/profile.d/bash-completion
+#if [ -f /etc/profile.d/bash-completion ]; then
+# . /etc/profile.d/bash-completion
+#fi
+
+if [ -e /etc/bash_completion.d/git -o "${HOME}"/.bash_completion.d/git ] ; then
+ #echo "/etc/bash_completion.d/git or ${HOME}/.bash_completion.d/git exists ..."
+ if ${use_color} ; then
+ if [ "$UID" = 0 ]; then
+ PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]'
+ else
+ PS1='$? \[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] > \[\033[00m\]'
+ fi
+ else
+ if [ "$UID" = 0 ]; then
+ PS1='$? \h:\w$(__git_ps1) \$ '
+ else
+ PS1='$? \u@\h:\w$(__git_ps1) > '
+ fi
+ fi
fi
# Try to keep environment pollution down, EPA loves us.
unset use_color safe_term match_lhs
+
+# vim: ts=4 expandtab
# Change the window title of X terminals
case ${TERM} in
xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
- PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
;;
screen)
- PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
;;
esac
-/usr/share/bash-completion/base
\ No newline at end of file
+../../usr/share/bash-completion/base
\ No newline at end of file
-/usr/share/bash-completion/bash-builtins
\ No newline at end of file
+../../usr/share/bash-completion/bash-builtins
\ No newline at end of file
-/usr/share/bash-completion/bind-utils
\ No newline at end of file
+../../usr/share/bash-completion/bind-utils
\ No newline at end of file
-/usr/share/bash-completion/bzip2
\ No newline at end of file
+../../usr/share/bash-completion/bzip2
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/coreutils
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/crontab
\ No newline at end of file
-/usr/share/bash-completion/dd
\ No newline at end of file
+../../usr/share/bash-completion/dd
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/e2fsprogs
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/eix
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/eselect
\ No newline at end of file
-/usr/share/bash-completion/figlet
\ No newline at end of file
+../../usr/share/bash-completion/figlet
\ No newline at end of file
-/usr/share/bash-completion/findutils
\ No newline at end of file
+../../usr/share/bash-completion/findutils
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/fuse
\ No newline at end of file
-/usr/share/bash-completion/getent
\ No newline at end of file
+../../usr/share/bash-completion/getent
\ No newline at end of file
-/usr/share/bash-completion/git
\ No newline at end of file
+../../usr/share/bash-completion/git
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/gpg
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/gpg2
\ No newline at end of file
-/usr/share/bash-completion/gzip
\ No newline at end of file
+../../usr/share/bash-completion/gzip
\ No newline at end of file
-/usr/share/bash-completion/iconv
\ No newline at end of file
+../../usr/share/bash-completion/iconv
\ No newline at end of file
-/usr/share/bash-completion/imagemagick
\ No newline at end of file
+../../usr/share/bash-completion/imagemagick
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/iproute2
\ No newline at end of file
-/usr/share/bash-completion/iptables
\ No newline at end of file
+../../usr/share/bash-completion/iptables
\ No newline at end of file
-/usr/share/bash-completion/lftp
\ No newline at end of file
+../../usr/share/bash-completion/lftp
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/lsof
\ No newline at end of file
-/usr/share/bash-completion/lzma
\ No newline at end of file
+../../usr/share/bash-completion/lzma
\ No newline at end of file
-/usr/share/bash-completion/man
\ No newline at end of file
+../../usr/share/bash-completion/man
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/ncftp
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/net-tools
\ No newline at end of file
-/usr/share/bash-completion/openssl
\ No newline at end of file
+../../usr/share/bash-completion/openssl
\ No newline at end of file
-/usr/share/bash-completion/perl
\ No newline at end of file
+../../usr/share/bash-completion/perl
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/procps
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/python
\ No newline at end of file
-/usr/share/bash-completion/rcs
\ No newline at end of file
+../../usr/share/bash-completion/rcs
\ No newline at end of file
-/usr/share/bash-completion/rrdtool
\ No newline at end of file
+../../usr/share/bash-completion/rrdtool
\ No newline at end of file
-/usr/share/bash-completion/rsync
\ No newline at end of file
+../../usr/share/bash-completion/rsync
\ No newline at end of file
-/usr/share/bash-completion/screen
\ No newline at end of file
+../../usr/share/bash-completion/screen
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/sqlite3
\ No newline at end of file
-/usr/share/bash-completion/ssh
\ No newline at end of file
+../../usr/share/bash-completion/ssh
\ No newline at end of file
-/usr/share/bash-completion/strace
\ No newline at end of file
+../../usr/share/bash-completion/strace
\ No newline at end of file
-/usr/share/bash-completion/subversion
\ No newline at end of file
+../../usr/share/bash-completion/subversion
\ No newline at end of file
-/usr/share/bash-completion/tar
\ No newline at end of file
+../../usr/share/bash-completion/tar
\ No newline at end of file
-/usr/share/bash-completion/tcpdump
\ No newline at end of file
+../../usr/share/bash-completion/tcpdump
\ No newline at end of file
-/usr/share/bash-completion/tree
\ No newline at end of file
+../../usr/share/bash-completion/tree
\ No newline at end of file
-/usr/share/bash-completion/unrar
\ No newline at end of file
+../../usr/share/bash-completion/unrar
\ No newline at end of file
--- /dev/null
+../../usr/share/bash-completion/util-linux
\ No newline at end of file
-/usr/share/bash-completion/vim
\ No newline at end of file
+../../usr/share/bash-completion/vim
\ No newline at end of file
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.20.45.42; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@managed-keys {
- # NOTE: This key is current as of October 2009.
- # If it fails to initialize correctly, it may have expired;
- # see https://www.isc.org/solutions/dlv for a replacement.
- dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2 brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5 ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh";
-};
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.20.45.42; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@/*
- * Refer to the named.conf(5) and named(8) man pages, and the documentation
- * in /usr/share/doc/bind-9 for more details.
- * Online versions of the documentation can be found here:
- * http://www.isc.org/software/bind/documentation
- *
- * If you are going to set up an authoritative server, make sure you
- * understand the hairy details of how DNS works. Even with simple mistakes,
- * you can break connectivity for affected parties, or cause huge amounts of
- * useless Internet traffic.
- */
-
-acl "xfer" {
- /* Allow no transfers. If we have other name servers, place them here. */
- //127.0.0.1/32;
- //::1/128;
- "none";
-};
-
-/*
- * You might put in here some ips which are allowed to use the cache or
- * recursive queries
- */
-acl "trusted" {
- 127.0.0.0/8;
- ::1/128;
-};
-
-options {
- directory "/var/bind";
- pid-file "/var/run/named/named.pid";
-
- /* https://www.isc.org/solutions/dlv >=bind-9.7.x only */
- // bindkeys-file "/etc/bind/bind.keys";
-
- listen-on-v6 { ::1; };
- listen-on { 127.0.0.1; };
-
- allow-query {
- /*
- * Accept queries from our "trusted" ACL. We will
- * allow anyone to query our master zones below.
- * This prevents us from becoming a free DNS server
- * to the masses.
- */
- trusted;
- };
-
- allow-query-cache {
- /* Use the cache for the "trusted" ACL. */
- trusted;
- };
-
- allow-transfer {
- /*
- * Zone tranfers limited to members of the
- * "xfer" ACL (e.g. secondary nameserver).
- */
- xfer;
- };
-
-/*
- * If you've got a DNS server around at your upstream provider, enter its
- * IP address here, and enable the line below. This will make you benefit
- * from its cache, thus reduce overall DNS traffic in the Internet.
- *
- * Uncomment the following lines to turn on DNS forwarding, and change
- * and/or update the forwarding ip address(es):
- */
-/*
- forward first;
- forwarders {
- // 123.123.123.123; // Your ISP NS
- // 124.124.124.124; // Your ISP NS
- 4.2.2.1; // Level3 Public DNS
- 4.2.2.2; // Level3 Public DNS
- 8.8.8.8; // Google Open DNS
- 8.8.4.4; // Google Open DNS
- };
-
-*/
-
- // dnssec-enable yes;
- // dnssec-validation yes;
-
- /* if you have problems and are behind a firewall: */
- //query-source address * port 53;
-};
-
-logging {
- channel default_log {
- file "/var/log/named/named.log" versions 5 size 50M;
- print-time yes;
- print-severity yes;
- print-category yes;
- };
-
- category default { default_log; };
- category general { default_log; };
-};
-
-include "/etc/bind/rndc.key";
-controls {
- inet 127.0.0.1 port 953 allow { 127.0.0.1/32; ::1/128; } keys { "rndc-key"; };
-};
-
-
-view "internal" in {
- /*
- * Our internal (trusted) view. We permit the internal networks
- * to freely access this view. We perform recursion for our
- * internal hosts, and retrieve data from the cache for them.
- */
-
- match-clients { trusted; };
- recursion yes;
- additional-from-auth yes;
- additional-from-cache yes;
-
- zone "." in {
- type hint;
- file "/var/bind/root.cache";
- };
-
- zone "localhost" IN {
- type master;
- file "pri/localhost.zone";
- allow-update { none; };
- notify no;
- allow-query { any; };
- allow-transfer { none; };
- };
-
- zone "127.in-addr.arpa" IN {
- type master;
- file "pri/127.zone";
- allow-update { none; };
- notify no;
- allow-query { any; };
- allow-transfer { none; };
- };
-
- /*
- * NOTE: All zone blocks for "public" view should be listed here in "internal"
- * too! Otherwise you'll have trouble to resolv the public zones properly.
- * That affects all hosts from the "trusted" ACL.
- * A separate config, which contains all zone blocks, might be better in
- * this case. Then you can simply add:
- * include "/etc/bind/zones.cfg";
- * for "internal" and "public" view.
- */
-
- /*
- * Briefly, a zone which has been declared delegation-only will be effectively
- * limited to containing NS RRs for subdomains, but no actual data beyond its
- * own apex (for example, its SOA RR and apex NS RRset). This can be used to
- * filter out "wildcard" or "synthesized" data from NAT boxes or from
- * authoritative name servers whose undelegated (in-zone) data is of no
- * interest.
- * See http://www.isc.org/software/bind/delegation-only for more info
- */
-
- //zone "COM" { type delegation-only; };
- //zone "NET" { type delegation-only; };
-};
-
-view "public" in {
- /*
- * Our external (untrusted) view. We permit any client to access
- * portions of this view. We do not perform recursion or cache
- * access for hosts using this view.
- */
-
- match-clients { any; };
- recursion no;
- additional-from-auth no;
- additional-from-cache no;
-
- zone "." in {
- type hint;
- file "/var/bind/root.cache";
- };
-
- //zone "YOUR-DOMAIN.TLD" {
- // type master;
- // file "/var/bind/pri/YOUR-DOMAIN.TLD.zone";
- // allow-query { any; };
- // allow-transfer { xfer; };
- //};
-
- //zone "YOUR-SLAVE.TLD" {
- // type slave;
- // file "/var/bind/sec/YOUR-SLAVE.TLD.zone";
- // masters { <MASTER>; };
-
- // /* Anybody is allowed to query but transfer should be controlled by the master. */
- // allow-query { any; };
- // allow-transfer { none; };
-
- // /* The master should be the only one who notifies the slaves, shouldn't it? */
- // allow-notify { <MASTER>; };
- // notify no;
- //};
-};
-
-/* Hide the bind version */
-/*
-view "chaos" chaos {
- match-clients { any; };
- allow-query { none; };
- zone "." {
- type hint;
- file "/dev/null"; // or any empty file
- };
-};
-*/
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.20.45.49; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@key "rndc-key" {
- algorithm hmac-md5;
- secret "cFBAmcAZaLb9yFB5HQG9Qg==";
-};
-@
+/* $Id: bind.keys,v 1.7 2011/01/03 23:45:07 each Exp $ */
+# The bind.keys file is used to override the built-in DNSSEC trust anchors
+# which are included as part of BIND 9. As of the current release, the only
+# trust anchors it contains are those for the DNS root zone ("."), and for
+# the ISC DNSSEC Lookaside Validation zone ("dlv.isc.org"). Trust anchors
+# for any other zones MUST be configured elsewhere; if they are configured
+# here, they will not be recognized or used by named.
+#
+# The built-in trust anchors are provided for convenience of configuration.
+# They are not activated within named.conf unless specifically switched on.
+# To use the built-in root key, set "dnssec-validation auto;" in
+# named.conf options. To use the built-in DLV key, set
+# "dnssec-lookaside auto;". Without these options being set,
+# the keys in this file are ignored.
+#
+# This file is NOT expected to be user-configured.
+#
+# These keys are current as of January 2011. If any key fails to
+# initialize correctly, it may have expired. In that event you should
+# replace this file with a current version. The latest version of
+# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.
+
managed-keys {
- # NOTE: This key is current as of October 2009.
- # If it fails to initialize correctly, it may have expired;
- # see https://www.isc.org/solutions/dlv for a replacement.
- dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2 brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5 ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh";
+ # ISC DLV: See https://www.isc.org/solutions/dlv for details.
+ # NOTE: This key is activated by setting "dnssec-lookaside auto;"
+ # in named.conf.
+ dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
+ brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
+ ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
+ Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
+ QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt
+ TDN0YUuWrBNh";
+
+ # ROOT KEY: See https://data.iana.org/root-anchors/root-anchors.xml
+ # for current trust anchor information.
+ # NOTE: This key is activated by setting "dnssec-validation auto;"
+ # in named.conf.
+ . initial-key 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
+ FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
+ bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
+ X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
+ W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
+ Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
+ QxA+Uk1ihz0=";
};
*/
acl "xfer" {
- /* Allow no transfers. If we have other name servers, place them here. */
- //127.0.0.1/32;
- //::1/128;
- "none";
+ /* Deny transfers by default except for the listed hosts.
+ * If we have other name servers, place them here.
+ */
+ none;
};
-/*
+/*
* You might put in here some ips which are allowed to use the cache or
* recursive queries
*/
pid-file "/var/run/named/named.pid";
/* https://www.isc.org/solutions/dlv >=bind-9.7.x only */
- // bindkeys-file "/etc/bind/bind.keys";
+ //bindkeys-file "/etc/bind/bind.keys";
listen-on-v6 { ::1; };
listen-on { 127.0.0.1; };
trusted;
};
+ allow-recursion {
+ /* Only trusted addresses are allowed to use recursion. */
+ trusted;
+ };
+
allow-transfer {
- /*
- * Zone tranfers limited to members of the
- * "xfer" ACL (e.g. secondary nameserver).
- */
- xfer;
+ /* Zone tranfers are denied by default. */
+ none;
};
-/*
- * If you've got a DNS server around at your upstream provider, enter its
- * IP address here, and enable the line below. This will make you benefit
- * from its cache, thus reduce overall DNS traffic in the Internet.
- *
- * Uncomment the following lines to turn on DNS forwarding, and change
- * and/or update the forwarding ip address(es):
- */
+ allow-update {
+ /* Don't allow updates, e.g. via nsupdate. */
+ none;
+ };
+
+ /*
+ * If you've got a DNS server around at your upstream provider, enter its
+ * IP address here, and enable the line below. This will make you benefit
+ * from its cache, thus reduce overall DNS traffic in the Internet.
+ *
+ * Uncomment the following lines to turn on DNS forwarding, and change
+ * and/or update the forwarding ip address(es):
+ */
/*
forward first;
forwarders {
// 123.123.123.123; // Your ISP NS
// 124.124.124.124; // Your ISP NS
- 4.2.2.1; // Level3 Public DNS
- 4.2.2.2; // Level3 Public DNS
+ // 4.2.2.1; // Level3 Public DNS
+ // 4.2.2.2; // Level3 Public DNS
8.8.8.8; // Google Open DNS
8.8.4.4; // Google Open DNS
};
*/
- // dnssec-enable yes;
- // dnssec-validation yes;
+ //dnssec-enable yes;
+ //dnssec-validation yes;
+
+ /*
+ * As of bind 9.8.0:
+ * "If the root key provided has expired,
+ * named will log the expiration and validation will not work."
+ */
+ //dnssec-validation auto;
/* if you have problems and are behind a firewall: */
//query-source address * port 53;
};
+/*
logging {
channel default_log {
file "/var/log/named/named.log" versions 5 size 50M;
category default { default_log; };
category general { default_log; };
};
+*/
include "/etc/bind/rndc.key";
controls {
inet 127.0.0.1 port 953 allow { 127.0.0.1/32; ::1/128; } keys { "rndc-key"; };
};
-
-view "internal" in {
- /*
- * Our internal (trusted) view. We permit the internal networks
- * to freely access this view. We perform recursion for our
- * internal hosts, and retrieve data from the cache for them.
- */
-
- match-clients { trusted; };
- recursion yes;
- additional-from-auth yes;
- additional-from-cache yes;
-
- zone "." in {
- type hint;
- file "/var/bind/root.cache";
- };
-
- zone "localhost" IN {
- type master;
- file "pri/localhost.zone";
- allow-update { none; };
- notify no;
- allow-query { any; };
- allow-transfer { none; };
- };
-
- zone "127.in-addr.arpa" IN {
- type master;
- file "pri/127.zone";
- allow-update { none; };
- notify no;
- allow-query { any; };
- allow-transfer { none; };
- };
-
- /*
- * NOTE: All zone blocks for "public" view should be listed here in "internal"
- * too! Otherwise you'll have trouble to resolv the public zones properly.
- * That affects all hosts from the "trusted" ACL.
- * A separate config, which contains all zone blocks, might be better in
- * this case. Then you can simply add:
- * include "/etc/bind/zones.cfg";
- * for "internal" and "public" view.
- */
-
- /*
- * Briefly, a zone which has been declared delegation-only will be effectively
- * limited to containing NS RRs for subdomains, but no actual data beyond its
- * own apex (for example, its SOA RR and apex NS RRset). This can be used to
- * filter out "wildcard" or "synthesized" data from NAT boxes or from
- * authoritative name servers whose undelegated (in-zone) data is of no
- * interest.
- * See http://www.isc.org/software/bind/delegation-only for more info
- */
-
- //zone "COM" { type delegation-only; };
- //zone "NET" { type delegation-only; };
+zone "." in {
+ type hint;
+ file "/var/bind/root.cache";
};
-view "public" in {
- /*
- * Our external (untrusted) view. We permit any client to access
- * portions of this view. We do not perform recursion or cache
- * access for hosts using this view.
- */
-
- match-clients { any; };
- recursion no;
- additional-from-auth no;
- additional-from-cache no;
-
- zone "." in {
- type hint;
- file "/var/bind/root.cache";
- };
+zone "localhost" IN {
+ type master;
+ file "pri/localhost.zone";
+ notify no;
+};
- //zone "YOUR-DOMAIN.TLD" {
- // type master;
- // file "/var/bind/pri/YOUR-DOMAIN.TLD.zone";
- // allow-query { any; };
- // allow-transfer { xfer; };
- //};
-
- //zone "YOUR-SLAVE.TLD" {
- // type slave;
- // file "/var/bind/sec/YOUR-SLAVE.TLD.zone";
- // masters { <MASTER>; };
-
- // /* Anybody is allowed to query but transfer should be controlled by the master. */
- // allow-query { any; };
- // allow-transfer { none; };
-
- // /* The master should be the only one who notifies the slaves, shouldn't it? */
- // allow-notify { <MASTER>; };
- // notify no;
- //};
+zone "127.in-addr.arpa" IN {
+ type master;
+ file "pri/127.zone";
+ notify no;
};
-/* Hide the bind version */
/*
-view "chaos" chaos {
- match-clients { any; };
- allow-query { none; };
- zone "." {
- type hint;
- file "/dev/null"; // or any empty file
- };
-};
-*/
+ * Briefly, a zone which has been declared delegation-only will be effectively
+ * limited to containing NS RRs for subdomains, but no actual data beyond its
+ * own apex (for example, its SOA RR and apex NS RRset). This can be used to
+ * filter out "wildcard" or "synthesized" data from NAT boxes or from
+ * authoritative name servers whose undelegated (in-zone) data is of no
+ * interest.
+ * See http://www.isc.org/software/bind/delegation-only for more info
+ */
+
+//zone "COM" { type delegation-only; };
+//zone "NET" { type delegation-only; };
+
+//zone "YOUR-DOMAIN.TLD" {
+// type master;
+// file "/var/bind/pri/YOUR-DOMAIN.TLD.zone";
+// allow-query { any; };
+// allow-transfer { xfer; };
+//};
+
+//zone "YOUR-SLAVE.TLD" {
+// type slave;
+// file "/var/bind/sec/YOUR-SLAVE.TLD.zone";
+// masters { <MASTER>; };
+
+ /* Anybody is allowed to query but transfer should be controlled by the master. */
+// allow-query { any; };
+// allow-transfer { none; };
+
+ /* The master should be the only one who notifies the slaves, shouldn't it? */
+// allow-notify { <MASTER>; };
+// notify no;
+//};
key "rndc-key" {
algorithm hmac-md5;
- secret "cFBAmcAZaLb9yFB5HQG9Qg==";
+ secret "6suJnYlADz5TDyfyfvi/5A==";
};
-/* $Id: bind.keys,v 1.7 2011-01-03 23:45:07 each Exp $ */
+/* $Id: bind.keys,v 1.7 2011/01/03 23:45:07 each Exp $ */
# The bind.keys file is used to override the built-in DNSSEC trust anchors
# which are included as part of BIND 9. As of the current release, the only
# trust anchors it contains are those for the DNS root zone ("."), and for
# Automatically generated by app-misc/ca-certificates-20111025
-# Sa 7. Jan 08:53:15 UTC 2012
+# So 22. Jul 22:05:12 UTC 2012
# Do not edit.
brasil.gov.br/brasil.gov.br.crt
cacert.org/cacert.org.crt
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.13.19.02; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.28.10.14.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# /etc/conf.d/apache2: config file for /etc/init.d/apache2
-
-# When you install a module it is easy to activate or deactivate the modules
-# and other features of apache using the APACHE2_OPTS line. Every module should
-# install a configuration in /etc/apache2/modules.d. In that file will have an
-# <IfDefine NNN> directive where NNN is the option to enable that module.
-#
-# Here are the options available in the default configuration:
-#
-# AUTH_DIGEST Enables mod_auth_digest
-# AUTHNZ_LDAP Enables authentication through mod_ldap (available if USE=ldap)
-# CACHE Enables mod_cache
-# DAV Enables mod_dav
-# ERRORDOCS Enables default error documents for many languages.
-# INFO Enables mod_info, a useful module for debugging
-# LANGUAGE Enables content-negotiation based on language and charset.
-# LDAP Enables mod_ldap (available if USE=ldap)
-# MANUAL Enables /manual/ to be the apache manual (available if USE=docs)
-# MEM_CACHE Enables default configuration mod_mem_cache
-# PROXY Enables mod_proxy
-# SSL Enables SSL (available if USE=ssl)
-# SUEXEC Enables running CGI scripts (in USERDIR) through suexec.
-# USERDIR Enables /~username mapping to /home/username/public_html
-#
-#
-# The following two options provide the default virtual host for the HTTP and
-# HTTPS protocol. YOU NEED TO ENABLE AT LEAST ONE OF THEM, otherwise apache
-# will not listen for incomming connections on the approriate port.
-#
-# DEFAULT_VHOST Enables name-based virtual hosts, with the default
-# virtual host being in /var/www/localhost/htdocs
-# SSL_DEFAULT_VHOST Enables default vhost for SSL (you should enable this
-# when you enable SSL)
-#
-#APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D MANUAL -D SSL -D SSL_DEFAULT_VHOST -D SUEXEC -D LANGUAGE"
-APACHE2_OPTS="-D DEFAULT_VHOST -D PHP5 -D SSL -D SSL_DEFAULT_VHOST -D MANUAL -D PERL -D INFO -D STATUS -D DAV -D SVN -D ERRORDOCS -D LANGUAGE -D FASTCGI"
-
-# Extended options for advanced uses of Apache ONLY
-# You don't need to edit these unless you are doing crazy Apache stuff
-# As not having them set correctly, or feeding in an incorrect configuration
-# via them will result in Apache failing to start
-# YOU HAVE BEEN WARNED.
-
-# PID file
-#PIDFILE=/var/run/apache2.pid
-
-# timeout for startup/shutdown checks
-#TIMEOUT=10
-
-# ServerRoot setting
-#SERVERROOT=/usr/lib64/apache2
-
-# Configuration file location
-# - If this does NOT start with a '/', then it is treated relative to
-# $SERVERROOT by Apache
-#CONFIGFILE=/etc/apache2/httpd.conf
-
-# Location to log startup errors to
-# They are normally dumped to your terminal.
-STARTUPERRORLOG="/var/log/apache2/startuperror.log"
-
-# A command that outputs a formatted text version of the HTML at the URL
-# of the command line. Designed for lynx, however other programs may work.
-#LYNX="lynx -dump"
-
-# The URL to your server's mod_status status page.
-# Required for status and fullstatus
-#STATUSURL="http://localhost/server-status"
-
-# Method to use when reloading the server
-# Valid options are 'restart' and 'graceful'
-# See http://httpd.apache.org/docs/2.2/stopping.html for information on
-# what they do and how they differ.
-#RELOAD_TYPE="graceful"
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d35 2
-a36 1
-APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D MANUAL -D SSL -D SSL_DEFAULT_VHOST -D SUEXEC -D LANGUAGE"
-d60 1
-a60 1
-#STARTUPERRORLOG="/var/log/apache2/startuperror.log"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.21.59.04; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/auditd-conf.d-1.2.3,v 1.1 2006/06/22 07:41:46 robbat2 Exp $
-
-# Configuration options for auditd
-# -f for foreground mode
-# There are some other options as well, but you'll have to look in the source
-# code to find them as they aren't ready for use yet.
-EXTRAOPTIONS=''
-
-# Audit rules file to run after starting auditd
-RULEFILE_STARTUP=/etc/audit/audit.rules
-
-# Audit rules file to run before and after stopping auditd
-RULEFILE_STOP_PRE=/etc/audit/audit.rules.stop.pre
-RULEFILE_STOP_POST=/etc/audit/audit.rules.stop.post
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.11.29.45; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@#
-# Define default options for autofs.
-#
-# MASTER_MAP_NAME - default map name for the master map.
-#
-#MASTER_MAP_NAME="auto.master"
-#
-# TIMEOUT - set the default mount timeout (default 600).
-#
-TIMEOUT=300
-#
-# NEGATIVE_TIMEOUT - set the default negative timeout for
-# failed mount attempts (default 60).
-#
-#NEGATIVE_TIMEOUT=60
-#
-# UMOUNT_WAIT - time to wait for a response from umount(8).
-#
-#UMOUNT_WAIT=12
-#
-# BROWSE_MODE - maps are browsable by default.
-#
-BROWSE_MODE="no"
-#
-# MOUNT_NFS_DEFAULT_PROTOCOL - specify the default protocol used by
-# mount.nfs(8). Since we can't identify
-# the default automatically we need to
-# set it in our configuration. This will
-# only make a difference for replicated
-# map entries as availability probing isn't
-# used for single host map entries.
-#
-#MOUNT_NFS_DEFAULT_PROTOCOL=3
-#
-# APPEND_OPTIONS - append to global options instead of replace.
-#
-#APPEND_OPTIONS="yes"
-#
-# LOGGING - set default log level "none", "verbose" or "debug"
-#
-#LOGGING="none"
-#
-# Define server URIs
-#
-# LDAP_URI - space seperated list of server uris of the form
-# <proto>://<server>[/] where <proto> can be ldap
-# or ldaps. The option can be given multiple times.
-# Map entries that include a server name override
-# this option.
-#
-# This configuration option can also be used to
-# request autofs lookup SRV RRs for a domain of
-# the form <proto>:///[<domain dn>]. Note that a
-# trailing "/" is not allowed when using this form.
-# If the domain dn is not specified the dns domain
-# name (if any) is used to construct the domain dn
-# for the SRV RR lookup. The server list returned
-# from an SRV RR lookup is refreshed according to
-# the minimum ttl found in the SRV RR records or
-# after one hour, whichever is less.
-#
-#LDAP_URI=""
-#
-# LDAP__TIMEOUT - timeout value for the synchronous API calls
-# (default is LDAP library default).
-#
-#LDAP_TIMEOUT=-1
-#
-# LDAP_NETWORK_TIMEOUT - set the network response timeout (default 8).
-#
-#LDAP_NETWORK_TIMEOUT=8
-#
-# Define base dn for map dn lookup.
-#
-# SEARCH_BASE - base dn to use for searching for map search dn.
-# Multiple entries can be given and they are checked
-# in the order they occur here.
-#
-#SEARCH_BASE=""
-#
-# Define the LDAP schema to used for lookups
-#
-# If no schema is set autofs will check each of the schemas
-# below in the order given to try and locate an appropriate
-# basdn for lookups. If you want to minimize the number of
-# queries to the server set the values here.
-#
-#MAP_OBJECT_CLASS="nisMap"
-#ENTRY_OBJECT_CLASS="nisObject"
-#MAP_ATTRIBUTE="nisMapName"
-#ENTRY_ATTRIBUTE="cn"
-#VALUE_ATTRIBUTE="nisMapEntry"
-#
-# Other common LDAP nameing
-#
-#MAP_OBJECT_CLASS="automountMap"
-#ENTRY_OBJECT_CLASS="automount"
-#MAP_ATTRIBUTE="ou"
-#ENTRY_ATTRIBUTE="cn"
-#VALUE_ATTRIBUTE="automountInformation"
-#
-#MAP_OBJECT_CLASS="automountMap"
-#ENTRY_OBJECT_CLASS="automount"
-#MAP_ATTRIBUTE="automountMapName"
-#ENTRY_ATTRIBUTE="automountKey"
-#VALUE_ATTRIBUTE="automountInformation"
-#
-# AUTH_CONF_FILE - set the default location for the SASL
-# authentication configuration file.
-#
-#AUTH_CONF_FILE="/etc/autofs_ldap_auth.conf"
-#
-# MAP_HASH_TABLE_SIZE - set the map cache hash table size.
-# Should be a power of 2 with a ratio roughly
-# between 1:10 and 1:20 for each map.
-#
-#MAP_HASH_TABLE_SIZE=1024
-#
-# General global options
-#
-# If the kernel supports using the autofs miscellanous device
-# and you wish to use it you must set this configuration option
-# to "yes" otherwise it will not be used.
-USE_MISC_DEVICE="yes"
-#
-#OPTIONS=""
-#
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.06.07.20.12.35; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/books-prod-fcgi: config file for /etc/init.d/books-prod-fcgi
-
-DAEMON_USER="frank"
-DAEMON_GROUP="users"
-PID_DIR="/var/run/frank"
-
-# Pid file to use (needs to be absolute path).
-DAEMON_PIDFILE="${PID_DIR}/books-prod.pid"
-
-# Working directory (needs to be absolute path).
-DAEMON_DIR="/var/www/books"
-
-# Path to the binary (needs to be absolute path).
-DAEMON_BINARY="${DAEMON_DIR}/script/frbr_books_fastcgi.pl"
-
-# Path to the socket for Apache mod_fastcgi
-DAEMON_SOCKET="/tmp/frbr_books_app.sock"
-
-# Count of daemon processes
-DAEMON_COUNT=2
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/bootmisc
-
-# Put a nologin file in /etc to prevent people from logging in before
-# system startup is complete
-
-DELAYLOGIN="no"
-
-
-# Should we completely wipe out /tmp or just selectively remove known
-# locks / files / etc... ?
-
-WIPE_TMP="yes"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.19.01.48; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Config file for /etc/init.d/clamd
-
-# NOTICE: Since clamav-0.85-r1, only START_CLAMD and START_FRESHCLAM settings
-# are used, other are silently ignored
-
-START_CLAMD=yes
-START_FRESHCLAM=yes
-CLAMD_NICELEVEL=3
-FRESHCLAM_NICELEVEL=19
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.41.04; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/clock
-
-# Set CLOCK to "UTC" if your hardware clock is set to UTC (also known as
-# Greenwich Mean Time). If that clock is set to the local time, then
-# set CLOCK to "local".
-# Note that if you dual boot with Windows, then you should set it to
-# "local" because Windows always sets the hardware clock to local time.
-
-CLOCK="UTC"
-
-# Select the proper timezone. For valid values, peek inside of the
-# /usr/share/zoneinfo/ directory. For example, some common values are
-# "America/New_York" or "EST5EDT" or "Europe/Berlin". If you want to
-# manage /etc/localtime yourself, set this to "".
-
-#TIMEZONE="Factory"
-TIMEZONE="Europe/Berlin"
-
-# If you wish to pass any other arguments to hwclock during bootup,
-# you may do so here.
-
-CLOCK_OPTS=""
-
-# If you want to set the Hardware Clock to the current System Time (software
-# clock) during shutdown, then say "yes" here.
-
-CLOCK_SYSTOHC="yes"
-
-
-### ALPHA SPECIFIC OPTIONS ###
-
-# If your alpha uses the SRM console, set this to "yes".
-SRM="no"
-
-# If your alpha uses the ARC console, set this to "yes".
-ARC="no"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/consolefont
-
-# CONSOLEFONT specifies the default font that you'd like Linux to use on the
-# console. You can find a good selection of fonts in /usr/share/consolefonts;
-# you shouldn't specify the trailing ".psf.gz", just the font name below.
-# To use the default console font, comment out the CONSOLEFONT setting below.
-# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont" as root).
-
-CONSOLEFONT="default8x16"
-
-# CONSOLETRANSLATION is the charset map file to use. Leave commented to use
-# the default one. Have a look in /usr/share/consoletrans for a selection of
-# map files you can use.
-
-#CONSOLETRANSLATION="8859-1_to_uni"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.18.39.55; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/crypto-loop: Configuration file for /etc/init.d/crypto-loop
-
-# More info can be found in the init.d script
-
-# Specify loopback configurations here. The format of this file is
-# shown in the following commented-out example. One line per loopback
-# configuration. For possible hash values, see `man hashalot`.
-
-# loop=/dev/loop0 hash='' cipher=serpent keysize=256 device=/dev/system/test other=''
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.49.09; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@RC_AFTER="lvm"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/env_whitelist: Environment whitelist for rc-system
-
-# Specify which variables are allowed to be passed from the environment to the
-# rc-system. If it is not set by the environment, then the variable will be
-# taken from /etc/profile.env - meaning, if you need to set LANG or such,
-# do it in a /etc/env.d/99myownstuff file for example, and run env-update.
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.59.33; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# conf.d file for git-daemon
-#
-# Please check man 1 git-daemon for more information about the options
-# git-daemon accepts. You MUST edit this to include your repositories you wish
-# to serve.
-#
-# Some of the meaningful options are:
-# --syslog --- Enables syslog logging
-# --verbose --- Enables verbose logging
-# --export-all --- Exports all repositories
-# --port=XXXX --- Starts in port XXXX instead of 9418
-#
-GITDAEMON_OPTS="--syslog /var/git"
-
-# To run an anonymous git safely, the following user should be able to only
-# read your Git repositories. It should not able able to write to anywhere on
-# your system, esp. not the repositories.
-GIT_USER="nobody"
-GIT_GROUP="nobody"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.43.30; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/init.d/gpm
-
-# Please uncomment the type of mouse you have and the appropriate MOUSEDEV entry
-
-MOUSE=ps2
-#MOUSE=imps2
-#MOUSEDEV=/dev/psaux
-MOUSEDEV=/dev/input/mice
-
-# Extra settings
-
-#RESPONSIVENESS=
-#REPEAT_TYPE=raw
-
-# Please uncomment this line if you want gpm to understand charsets used
-# in URLs and names with ~ or : in them, etc. This is a good idea to turn on!
-
-#APPEND="-l \"a-zA-Z0-9_.:~/\300-\326\330-\366\370-\377\""
-
-# Various other options, see gpm(8) manpage for more.
-
-#APPEND="-g 1 -A60"
-#APPEND="-l \"a-zA-Z0-9_.:~/\300-\326\330-\366\370-\377\" -g 1 -A60"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.25.11.05.48; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/hostname
-
-# Set to the hostname of this machine
-HOSTNAME="helga"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.21.26.03; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/ip6tables
-
-# Location in which iptables initscript will save set rules on
-# service shutdown
-IP6TABLES_SAVE="/var/lib/ip6tables/rules-save"
-
-# Options to pass to iptables-save and iptables-restore
-SAVE_RESTORE_OPTIONS="-c"
-
-# Save state on stopping iptables
-SAVE_ON_STOP="yes"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.21.26.03; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/iptables
-
-# Location in which iptables initscript will save set rules on
-# service shutdown
-IPTABLES_SAVE="/var/lib/iptables/rules-save"
-
-# Options to pass to iptables-save and iptables-restore
-SAVE_RESTORE_OPTIONS="-c"
-
-# Save state on stopping iptables
-SAVE_ON_STOP="yes"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.25.11.41.40; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/keymaps
-
-# Use KEYMAP to specify the default console keymap. There is a complete tree
-# of keymaps in /usr/share/keymaps to choose from.
-
-#KEYMAP="us"
-KEYMAP="de-latin1-nodeadkeys"
-
-
-# Should we first load the 'windowkeys' console keymap? Most x86 users will
-# say "yes" here. Note that non-x86 users should leave it as "no".
-
-SET_WINDOWKEYS="no"
-
-
-# The maps to load for extended keyboards. Most users will leave this as is.
-
-EXTENDED_KEYMAPS=""
-#EXTENDED_KEYMAPS="backspace keypad euro"
-
-
-# Tell dumpkeys(1) to interpret character action codes to be
-# from the specified character set.
-# This only matters if you set UNICODE="yes" in /etc/rc.conf.
-# For a list of valid sets, run `dumpkeys --help`
-
-DUMPKEYS_CHARSET=""
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.22.57.50; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Generated by sensors-detect on Wed Dec 1 23:57:50 2010
-# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
-# be loaded/unloaded.
-#
-# The format of this file is a shell script that simply defines variables:
-# HWMON_MODULES for hardware monitoring driver modules, and optionally
-# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
-
-# Load modules at startup
-LOADMODULES=yes
-
-# Initialize sensors at startup
-INITSENSORS=yes
-
-HWMON_MODULES="w83627ehf"
-
-# For compatibility reasons, modules are also listed individually as variables
-# MODULE_0, MODULE_1, MODULE_2, etc.
-# Please note that the numbers in MODULE_X must start at 0 and increase in
-# steps of 1. Any number that is missing will make the init script skip the
-# rest of the modules. Use MODULE_X_ARGS for arguments.
-#
-# You should use BUS_MODULES and HWMON_MODULES instead if possible.
-
-MODULE_0=w83627ehf
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.07.06.20.56.22; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/local.start
-
-# This is a good place to load any misc programs
-# on startup (use &>/dev/null to hide output)
-
-echo "Setze Standard-Route IPv6 via fe80::1 dev eth0"
-/sbin/ip -6 route add default via fe80::1 dev eth0
-
-echo "Sende Mail wegen Boot ..."
-echo "Server `hostname` wird '`date`' gebootet" | /usr/bin/mailx -s "Boot von `hostname`" root@@localhost
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.07.06.20.54.37; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/local.stop
-
-# This is a good place to unload any misc.
-# programs you started above.
-# For example, if you are using OSS and have
-# "/usr/local/bin/soundon" above, put
-# "/usr/local/bin/soundoff" here.
-
-echo "Sende Mail wegen Shutdown ..."
-echo "Server `hostname` wird '`date`' ordentlich heruntergefahren" | /usr/bin/mailx -s "Shutdown von `hostname`" root@@localhost
-
-echo
-echo "Warte 5 Sekunden ..."
-echo
-sleep 5
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.49.08; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# LVM should normally only be started after mdraid is available
-# this is because LVM physical volumes are very often MD devices.
-RC_AFTER="mdraid"
-
-# vim: ft=gentoo-conf-d
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.47.44; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/mdadm: config file for /etc/init.d/mdadm
-
-# Misc options to pass to mdadm in monitor mode.
-# For more info, run `mdadm --monitor --help` or see
-# the mdadm(8) manpage.
-
-MDADM_OPTS="--syslog"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.17.47.44; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/mdraid: config file for /etc/init.d/mdraid
-
-# For people who run raid on top of some other layer (like
-# dmcrypt), use rc_need to specify that requirement. See
-# the runscript(8) man page for more information.
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.06.29.11; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Here is where we define which server(s) to start.
-# Additional parameters to be passed to mysqld at startup may be added here,
-# which will override the ones in "my.cnf".
-#
-# Below are described some suggested parameters to use.
-# The parameters not recognized will be passed through to the mysqld daemon
-# directly!
-# To avoid starting a server just comment it's definition.
-#
-# Last but not least, SPACES are NOT allowed inside the parameters!
-#
-# Parameter : description
-# ----------------+-----------------------------------------------------------
-# nice : integer [-20 .. 19 ] default 0
-# : change the priority of the server -20 (high) to 19 (low)
-# : see "man nice 1" for description
-# ----------------+-----------------------------------------------------------
-# mycnf : string [full path to my.cnf]
-# : specify the path to my.cnf file to be used
-# ----------------+-----------------------------------------------------------
-# startup_timeout : integer [seconds] default 15
-# : time to wait for mysqld up and running, after this it's
-# : marked as failed
-# ----------------+-----------------------------------------------------------
-#
-# Additional parameters
-# Parameter : description
-# ----------------+-----------------------------------------------------------
-# server-id : integer [1 .. 255]
-# : Uniquely identifies the server instance in the community
-# : of replication partners.
-# ----------------+-----------------------------------------------------------
-# port : integer [1025 .. 65535] default 3306
-# : Port number to use for connection.
-# : Looses any meaning if skip-networking is set.
-# ----------------+-----------------------------------------------------------
-# skip-networking : NULL
-# : Don't allow connection through TCP/IP.
-# ----------------+-----------------------------------------------------------
-# log-bin : string [name of the binlog files]
-# : Log update queries in binary format. Optional (but
-# : strongly recommended to avoid replication problems if
-# : server's hostname changes) argument should be the chosen
-# : location for the binary log files.
-# ----------------+-----------------------------------------------------------
-# Additionally the following variables are recognized:
-#
-# Be more verbose, accepts values from 1 to 4
-#DEBUG=4
-#
-# The default location for the "master" pid file
-#MYSQL_GLOB_PID_FILE="/var/run/svc-started-mysqld"
-#
-# The timeout for a failed attempt to stop a server
-#STOPTIMEOUT=120
-#
-
-# The parameters are passed in a bash array variable,
-# the variable name is mysql_slot_0_[server-num]
-# "server-num" is an optional number used to start multiple servers
-#
-# Examples:
-#
-# start a default server with default options:
-#mysql_slot_0=()
-#
-# start MySQL reniced, overriding some start parameters
-#mysql_slot_0=(
-# "nice=-5"
-# "server-id=123"
-# "log-bin="myhost"
-# "port=3307"
-#)
-#
-# start another server, different my.cnf
-#mysql_slot_0_1=(
-# "mycnf=/home/test/my.cnf"
-# "server-id=124"
-#)
-#
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.06.29.11; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Here is where we define which server(s) to start.
-# Additional parameters to be passed to mysqlmanager at startup may be added here,
-# which will override the ones in "my.cnf".
-#
-# To avoid starting a server just comment it's definition
-# here or it will rant (no default start).
-# Last but not least, spaces are NOT allowed inside the parameters!
-#
-# Below are described some suggested parameters to use.
-# The parameters not recognized will be passed through to the mysqlmanager directly.
-#
-# Parameter : description
-
-# ----------------+-----------------------------------------------------------
-# mycnf : string [full path to my.cnf]
-# : specify the path to my.cnf file to be used
-# : may contain a [manager] section
-# ----------------+-----------------------------------------------------------
-#
-# Basic default
-#
-#mysqlmanager_slot_0=()
-#
-# Start MySQL 5.0.X overriding the my.cnf path
-#mysqlmanager_slot_500=(
-# "mycnf=/home/test/my.cnf"
-#)
-#
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.11.49.07; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/files/conf.d,v 1.1 2004/08/20 13:38:13 eldad Exp $
-
-# Distributed monitoring users will want to configure here the ip/hostname of the central server.
-# It will be used by submit_check_result_via_nsca.
-NAGIOS_NSCA_HOST="localhost"
-
-
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.05.00; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Set various named options here.
-#
-OPTIONS=""
-
-# Set this to the number of processors you want bind to use.
-# Leave this unchanged if you want bind to automatically detect the number
-#CPU="1"
-
-# If you wish to run bind in a chroot:
-# 1) un-comment the CHROOT= assignment, below. You may use
-# a different chroot directory but MAKE SURE it's empty.
-# 2) run: emerge --config =<bind-version>
-#
-# CHROOT="/chroot/dns"
-
-# RNDC needs to be told what server we're using sometimes.
-#SERVER="-s 127.0.0.1"
-# rndc key to use
-RNDC_KEY="${CHROOT}/etc/bind/rndc.key"
-
-# Default pid file location
-PIDFILE="${CHROOT}/var/run/named/named.pid"
-
-# Scheduling priority: 19 is the lowest and -20 is the highest.
-#
-NAMED_NICELEVEL="0"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.19.09.20.15; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# This blank configuration will automatically use DHCP for any net.*
-# scripts in /etc/init.d. To create a more complete configuration,
-# please review /etc/conf.d/net.example and save your configuration
-# in /etc/conf.d/net (this file :]!).
-
-dns_domain_lo="brehm-online.com"
-dns_servers_lo="127.0.0.1 81.169.163.106 85.214.7.22"
-dns_search_lo="brehm-online.com brehm-online.eu brehm-berlin.de serverkompetenz.net"
-
-config_eth0=(
- "85.214.134.152/32 brd 85.214.134.152"
- "2a01:238:4225:6e00:8f8c:808a:7fb8:88df/128"
-)
-
-#routes_eth0=(
-# "default via 192.168.0.1" # IPv4 default route
-# "10.0.0.0/8 via 192.168.0.1" # IPv4 subnet route
-# "::/0" # IPv6 unicast
-#)
-
-# 85.214.128.1 dev eth0 scope link
-# 169.254.0.0/16 dev eth0 scope link
-# default via 85.214.128.1 dev eth0
-
-routes_eth0=(
- "85.214.128.1 dev eth0 scope link"
- "169.254.0.0/16 dev eth0 scope link"
- "default via 85.214.128.1"
-)
-# "-family inet6 default via fe80::1 dev eth0"
-
-dns_domain_eth0="brehm-online.com"
-dns_servers_eth0="127.0.0.1 81.169.163.106 85.214.7.22"
-dns_search_eth0="brehm-online.com brehm-online.eu brehm-berlin.de serverkompetenz.net"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatability with existing ones.
-#
-# Modules load by default if the package they need is installed. If
-# you specify a module here that doesn't have it's package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-# Prefer ifconfig over iproute2
-#modules=( "ifconfig" )
-
-# You can also specify other modules for an interface
-# In this case we prefer udhcpc over dhcpcd
-#modules_eth0=( "udhcpc" )
-
-# You can also specify which modules not to use - for example you may be
-# using a supplicant or linux-wlan-ng to control wireless configuration but
-# you still want to configure network settings per ESSID associated with.
-#modules=( "!iwconfig" "!wpa_supplicant" )
-# IMPORTANT: If you need the above, please disable modules in that order
-
-
-##############################################################################
-# INTERFACE HANDLERS
-#
-# We provide two interface handlers presently: ifconfig and iproute2.
-# You need one of these to do any kind of network configuration.
-# For ifconfig support, emerge sys-apps/net-tools
-# For iproute2 support, emerge sys-apps/iproute2
-
-# If you don't specify an interface then we prefer iproute2 if it's installed
-# To prefer ifconfig over iproute2
-#modules=( "ifconfig" )
-
-# For a static configuration, use something like this
-# (They all do exactly the same thing btw)
-#config_eth0=( "192.168.0.2/24" )
-#config_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-
-# We can also specify a broadcast
-#config_eth0=( "192.168.0.2/24 brd 192.168.0.255" )
-#config_eth0=( "192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" )
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-# (eth0:1, eth0:2, etc)
-# iproute2 does not do this as there is no need to
-#config_eth0=(
-# "192.168.0.2/24"
-# "192.168.0.3/24"
-# "192.168.0.4/24"
-#)
-# Or you can use sequence expressions
-#config_eth0=( "192.168.0.{2..4}/24" )
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0=(
-# "192.168.0.2/24"
-# "4321:0:1:2:3:4:567:89ab/64"
-# "4321:0:1:2:3:4:567:89ac/64"
-#)
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0=( "noop" "192.168.0.2/24" )
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0=( "null" )
-
-# Here's how to do routing if you need it
-#routes_eth0=(
-# "default via 192.168.0.1" # IPv4 default route
-# "10.0.0.0/8 via 192.168.0.1" # IPv4 subnet route
-# "::/0" # IPv6 unicast
-#)
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-#fallback_route_eth0=( "default via 192.168.0.1" )
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-
-# Each module described below can set a default base metric, lower is
-# preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
-#metric_eth0="100"
-# or on a global basis
-#metric="100"
-# The only downside of the global setting is that you have to ensure that
-# there are no conflicting routes yourself. For users with large routing
-# tables you may have to set a global metric as the due to a simple read of
-# the routing table taking over a minute at a time.
-
-##############################################################################
-# OPTIONAL MODULES
-
-# INTERFACE RENAMING
-# There is no consistent device renaming scheme for Linux.
-# The preferred way of naming devices is via the kernel module directly or
-# by using udev (http://www.reactivated.net/udevrules.php)
-
-# If you are unable to write udev rules, then we do provide a way of renaming
-# the interface based on it's MAC address, but it is not optimal.
-# Here is how to rename an interface whose MAC address is 00:11:22:33:44:55
-# to foo1
-#rename_001122334455="foo1"
-
-# You can also do this based on current device name - although this is not
-# recommended. Here we rename eth1 to foo2.
-#rename_eth1="foo2"
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by iwconfig or wpa_supplicant
-
-# iwconfig
-# emerge net-wireless/wireless-tools
-# Wireless options are held in /etc/conf.d/wireless - but could be here too
-# Consult the sample file /etc/conf.d/wireless.example for instructions
-# iwconfig is the default
-
-# wpa_supplicant
-# emerge net-wireless/wpa_supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-# To choose wpa_supplicant over iwconfig
-#modules=( "wpa_supplicant" )
-# To configure wpa_supplicant
-#wpa_supplicant_eth0="-Dwext" # For generic wireless
-#wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
-# Consult wpa_supplicant for more drivers
-# By default don't wait for wpa_suppliant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# GENERIC WIRELESS OPTIONS
-# PLEASE READ THE INSTRUCTIONS IN /etc/conf.d/wireless.example FOR
-# HOW TO USE THIS ESSID VARIABLE
-# You can also override any settings found here per ESSID - which is very
-# handy if you use different networks a lot
-#config_ESSID=( "dhcp" )
-#dhcpcd_ESSID="-t 5"
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# set dhcp_ESSID="nodns"
-#dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" )
-#dns_domain_ESSID="some.domain"
-#dns_search_ESSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search are mutually exclusive.
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same ESSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455=( "dhcp" )
-#mac_dhcpcd_001122334455="-t 10"
-#mac_dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
-
-# When an interface has been associated with an Access Point, a global
-# variable called ESSID is set to the Access Point's ESSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed any of the above packages, you need to disable them
-#modules=( "!iwconfig" "!wpa_supplicant" )
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc.
-#
-# dhclient: emerge net-misc/dhcp
-# dhcpcd: emerge net-misc/dhcpcd
-# pump: emerge net-misc/pump
-# udhcpc: emerge net-misc/udhcp
-
-# If you have more than one DHCP client installed, you need to specify which
-# one to use - otherwise we default to dhcpcd if available.
-#modules=( "dhclient" ) # to select dhclient over dhcpcd
-#
-# Notes:
-# - All clients send the current hostname to the DHCP server by default
-# - dhcpcd does not daemonize when the lease time is infinite
-# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers
-# - pump does not support getting NIS servers
-# - DHCP tends to erase any existing device information - so add
-# static addresses after dhcp if you need them
-# - dhclient and udhcpc can set other resolv.conf options such as "option"
-# and "sortlist"- see the System module for more details
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0=( "dhcp" )
-
-# For passing custom options to dhcpcd use something like the following. This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# dhclient, udhcpc and pump don't have many runtime options
-# You can pass options to them in a similar manner to dhcpcd though
-#dhclient_eth0="..."
-#udhcpc_eth0="..."
-#pump_eth0="..."
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release it's lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-#-----------------------------------------------------------------------------
-# For APIPA support, emerge net-misc/iputils or net-analyzer/arping
-
-# APIPA is a module that tries to find a free address in the range
-# 169.254.0.0-169.254.255.255 by arping a random address in that range on the
-# interface. If no reply is found then we assign that address to the interface
-
-# This is only useful for LANs where there is no DHCP server and you don't
-# connect directly to the internet.
-#config_eth0=( "dhcp" )
-#fallback_eth0=( "apipa" )
-
-#-----------------------------------------------------------------------------
-# ARPING Gateway configuration
-# and
-# Automatic Private IP Addressing (APIPA)
-# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping
-#
-# This is a module that tries to find a gateway IP. If it exists then we use
-# that gateways configuration for our own. For the configuration variables
-# simply ensure that each octet is zero padded and the dots are removed.
-# Below is an example.
-#
-#gateways_eth0="192.168.0.1 10.0.0.1"
-#config_192168000001=( "192.168.0.2/24" )
-#routes_192168000001=( "default via 192.168.0.1" )
-#dns_servers_192168000001=( "192.168.0.1" )
-#config_010000000001=( "10.0.0.254/8" )
-#routes_010000000001=( "default via 10.0.0.1" )
-#dns_servers_010000000001=( "10.0.0.1" )
-
-# We can also specify a specific MAC address for each gateway if different
-# networks have the same gateway.
-#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF"
-#config_192168000001_001122AABBCC=( "192.168.0.2/24" )
-#routes_192168000001_001122AABBCC=( "default via 192.168.0.1" )
-#dns_servers_192168000001_001122AABBCC=( "192.168.0.1" )
-#config_010000000001_334455DDEEFF=( "10.0.0.254/8" )
-#routes_010000000001_334455DDEEFF=( "default via 10.0.0.1" )
-#dns_servers_010000000001_334455DDEEFF=( "10.0.0.1" )
-
-# If we don't find any gateways (or there are none configured) then we try and
-# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255
-# by arping a random address in that range on the interface. If no reply is
-# found then we assign that address to the interface.
-
-# This is only useful for LANs where there is no DHCP server.
-#config_eth0=( "arping" )
-
-# or if no DHCP server can be found
-#config_eth0=( "dhcp" )
-#fallback_eth0=( "arping" )
-
-# NOTE: We default to sleeping for 1 second the first time we attempt an
-# arping to give the interface time to settle on the LAN. This appears to
-# be a good default for most instances, but if not you can alter it here.
-#arping_sleep=5
-#arping_sleep_lan=7
-
-# NOTE: We default to waiting 3 seconds to get an arping response. You can
-# change the default wait like so.
-#arping_wait=3
-#arping_wait_lan=2
-
-#-----------------------------------------------------------------------------
-# VLAN (802.1q support)
-# For VLAN support, emerge net-misc/vconfig
-
-# Specify the VLAN numbers for the interface like so
-# Please ensure your VLAN IDs are NOT zero-padded
-#vlans_eth0="1 2"
-
-# You may not want to assign an IP the the physical interface, but we still
-# need it up.
-#config_eth0=( "null" )
-
-# You can also configure the VLAN - see for vconfig man page for more details
-#vconfig_eth0=( "set_name_type VLAN_PLUS_VID_NO_PAD" )
-#vconfig_vlan1=( "set_flag 1" "set_egress_map 2 6" )
-#config_vlan1=( "172.16.3.1 netmask 255.255.254.0" )
-#config_vlan2=( "172.16.2.1 netmask 255.255.254.0" )
-
-# NOTE: Vlans can be configured with a . in their interface names
-# When configuring vlans with this name type, you need to replace . with a _
-#config_eth0.1=( "dhcp" ) - does not work
-#config_eth0_1=( "dhcp" ) - does work
-
-# NOTE: Vlans are controlled by their physical interface and not per vlan
-# This means you do not need to create init scripts in /etc/init.d for each
-# vlan, you must need to create one for the physical interface.
-# If you wish to control the configuration of each vlan through a separate
-# script, or wish to rename the vlan interface to something that vconfig
-# cannot then you need to do this.
-#vlan_start_eth0="no"
-
-# If you do the above then you may want to depend on eth0 like so
-# RC_NEED_vlan1="net.eth0"
-# NOTE: depend functions only work in /etc/conf.d/net
-# and not in profile configs such as /etc/conf.d/net.foo
-
-#-----------------------------------------------------------------------------
-# Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
-
-# To bond interfaces together
-#slaves_bond0="eth0 eth1 eth2"
-#config_bond0=( "null" ) # You may not want to assign an IP the the bond
-
-# If any of the slaves require extra configuration - for example wireless or
-# ppp devices - we need to depend function on the bonded interfaces
-#RC_NEED_bond0="net.eth0 net.eth1"
-
-
-#-----------------------------------------------------------------------------
-# Classical IP over ATM
-# For CLIP support emerge net-dialup/linux-atm
-
-# Ensure that you have /etc/atmsigd.conf setup correctly
-# Now setup each clip interface like so
-#clip_atm0=( "peer_ip [if.]vpi.vci [opts]" ... )
-# where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection
-# with your ISP, your only peer is usually the ISP gateway closest to you),
-# "if" is the number of the ATM interface which will carry the PVC, "vpi.vci"
-# is the ATM VC address, and "opts" may optionally specify VC parameters like
-# qos, pcr, and the like (see "atmarp -s" for further reference). Please also
-# note quoting: it is meant to distinguish the VCs you want to create. You may,
-# in example, create an atm0 interface to more peers, like this:
-#clip_atm0=( "1.1.1.254 0.8.35" "1.1.1.253 1.8.35" )
-
-# By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a
-# null encapsulation (aka "VC mode"), please add the keyword "null" to opts.
-
-
-#-----------------------------------------------------------------------------
-# PPP
-# For PPP support, emerge net-dialup/ppp
-# PPP is used for most dialup connections, including ADSL.
-# The older ADSL module is documented below, but you are encouraged to try
-# this module first.
-#
-# You need to create the PPP net script yourself. Make it like so
-#ln -s net.lo /etc/init.d/net.ppp0
-#
-# We have to instruct ppp0 to actually use ppp
-#config_ppp0=( "ppp" )
-#
-# Each PPP interface requires an interface to use as a "Link"
-#link_ppp0="/dev/ttyS0" # Most PPP links will use a serial port
-#link_ppp0="eth0" # PPPoE requires an ethernet interface
-#link_ppp0="[itf.]vpi.vci" # PPPoA requires the ATM VC's address
-#link_ppp0="/dev/null" # ISDN links should have this
-#link_ppp0="pty 'your_link_command'" # PPP links over ssh, rsh, etc
-#
-# Here you should specify what pppd plugins you want to use
-# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius,
-# radattr, radrealms and winbind
-#plugins_ppp0=(
-# "pppoe" # Required plugin for PPPoE
-# "pppoa vc-encaps" # Required plugin for PPPoA with an option
-# "capi" # Required plugin for ISDN
-#)
-#
-# PPP requires at least a username. You can optionally set a password here too
-# If you don't, then it will use the password specified in /etc/ppp/*-secrets
-# against the specified username
-#username_ppp0='user'
-#password_ppp0='password'
-# NOTE: You can set a blank password like so
-#password_ppp0=
-#
-# The PPP daemon has many options you can specify - although there are many
-# and may seem daunting, it is recommended that you read the pppd man page
-# before enabling any of them
-#pppd_ppp0=(
-# "maxfail 0" # WARNING: It's not recommended you use this
-# # if you don't specify maxfail then we assume 0
-# "updetach" # If not set, "/etc/init.d/net.ppp0 start" will return
-# # immediately, without waiting the link to come up
-# # for the first time.
-# # Do not use it for dial-on-demand links!
-# "debug" # Enables syslog debugging
-# "noauth" # Do not require the peer to authenticate itself
-# "defaultroute" # Make this PPP interface the default route
-# "usepeerdns" # Use the DNS settings provided by PPP
-#
-# On demand options
-# "demand" # Enable dial on demand
-# "idle 30" # Link goes down after 30 seconds of inactivity
-# "10.112.112.112:10.112.112.113" # Phony IP addresses
-# "ipcp-accept-remote" # Accept the peers idea of remote address
-# "ipcp-accept-local" # Accept the peers idea of local address
-# "holdoff 3" # Wait 3 seconds after link dies before re-starting
-#
-# Dead peer detection
-# "lcp-echo-interval 15" # Send a LCP echo every 15 seconds
-# "lcp-echo-failure 3" # Make peer dead after 3 consective
-# # echo-requests
-#
-# Compression options - use these to completely disable compression
-# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
-#
-# Dial-up settings
-# "lock" # Lock serial port
-# "115200" # Set the serial port baud rate
-# "modem crtscts" # Enable hardware flow control
-# "192.168.0.1:192.168.0.2" # Local and remote IP addresses
-#)
-#
-# Dial-up PPP users need to specify at least one telephone number
-#phone_number_ppp0=( "12345689" ) # Maximum 2 phone numbers are supported
-# They will also need a chat script - here's a good one
-#chat_ppp0=(
-# 'ABORT' 'BUSY'
-# 'ABORT' 'ERROR'
-# 'ABORT' 'NO ANSWER'
-# 'ABORT' 'NO CARRIER'
-# 'ABORT' 'NO DIALTONE'
-# 'ABORT' 'Invalid Login'
-# 'ABORT' 'Login incorrect'
-# 'TIMEOUT' '5'
-# '' 'ATZ'
-# 'OK' 'AT' # Put your modem initialization string here
-# 'OK' 'ATDT\T'
-# 'TIMEOUT' '60'
-# 'CONNECT' ''
-# 'TIMEOUT' '5'
-# '~--' ''
-#)
-
-# If the link require extra configuration - for example wireless or
-# RFC 268 bridge - we need to depend on the bridge so they get
-# configured correctly.
-#RC_NEED_ppp0="net.nas0"
-
-#WARNING: if MTU of the PPP interface is less than 1500 and you use this
-#machine as a router, you should add the following rule to your firewall
-#
-#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-#-----------------------------------------------------------------------------
-# ADSL
-# For ADSL support, emerge net-dialup/rp-pppoe
-# WARNING: This ADSL module is being deprecated in favour of the PPP module
-# above.
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ADSL
-#config_eth0=( "adsl" )
-
-# You probably won't need to edit /etc/ppp/pppoe.conf if you set this
-#adsl_user_eth0="my-adsl-username"
-
-#-----------------------------------------------------------------------------
-# ISDN
-# For ISDN support, emerge net-dialup/isdn4k-utils
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ISDN
-#config_ippp0=( "dhcp" )
-# It's important to specify dhcp if you need it!
-#config_ippp0=( "192.168.0.1/24" )
-# Otherwise, you can use a static IP
-
-# NOTE: The interface name must be either ippp or isdn followed by a number
-
-# You may need this option to set the default route
-#ipppd_eth0="defaultroute"
-
-#-----------------------------------------------------------------------------
-# MAC changer
-# To set a specific MAC address
-#mac_eth0="00:11:22:33:44:55"
-
-# For changing MAC addresses using the below, emerge net-analyzer/macchanger
-# - to randomize the last 3 bytes only
-#mac_eth0="random-ending"
-# - to randomize between the same physical type of connection (e.g. fibre,
-# copper, wireless) , all vendors
-#mac_eth0="random-samekind"
-# - to randomize between any physical type of connection (e.g. fibre, copper,
-# wireless) , all vendors
-#mac_eth0="random-anykind"
-# - full randomization - WARNING: some MAC addresses generated by this may NOT
-# act as expected
-#mac_eth0="random-full"
-# custom - passes all parameters directly to net-analyzer/macchanger
-#mac_eth0="some custom set of parameters"
-
-# You can also set other options based on the MAC address of your network card
-# Handy if you use different docking stations with laptops
-#config_001122334455=( "dhcp" )
-
-#-----------------------------------------------------------------------------
-# TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
-#
-# You must specify if we're a tun or tap device. Then you can give it any
-# name you like - such as vpn
-#tuntap_vpn="tun"
-#config_vpn=( "192.168.0.1/24")
-
-# Or stick wit the generic names - like tap0
-#tuntap_tap0="tap"
-#config_tap0=( "192.168.0.1/24")
-
-# For passing custom options to tunctl use something like the following. This
-# example sets the owner to adm
-#tunctl_tun1="-u adm"
-# When using openvpn, there are no options
-
-#-----------------------------------------------------------------------------
-# Bridging (802.1d)
-# For bridging support emerge net-misc/bridge-utils
-
-# To add ports to bridge br0
-#bridge_br0="eth0 eth1"
-# or dynamically add them when the interface comes up
-#bridge_add_eth0="br0"
-#bridge_add_eth1="br0"
-
-# You need to configure the ports to null values so dhcp does not get started
-#config_eth0=( "null" )
-#config_eth1=( "null" )
-
-# Finally give the bridge an address - dhcp or a static IP
-#config_br0=( "dhcp" ) # may not work when adding ports dynamically
-#config_br0=( "192.168.0.1/24" )
-
-# If any of the ports require extra configuration - for example wireless or
-# ppp devices - we need to depend on them like so.
-#RC_NEED_br0="net.eth0 net.eth1"
-
-# Below is an example of configuring the bridge
-# Consult "man brctl" for more details
-#brctl_br0=( "setfd 0" "sethello 0" "stp off" )
-
-#-----------------------------------------------------------------------------
-# RFC 2684 Bridge Support
-# For RFC 2684 bridge support emerge net-misc/br2684ctl
-
-# Interface names have to be of the form nas0, nas1, nas2, etc.
-# You have to specify a VPI and VCI for the interface like so
-#br2684ctl_nas0="-a 0.38" # UK VPI and VCI
-
-# You may want to configure the encapsulation method as well by adding the -e
-# option to the command above (may need to be before the -a command)
-# -e 0 # LLC (default)
-# -e 1 # VC mux
-
-# Then you can configure the interface as normal
-#config_nas0=( "192.168.0.1/24" )
-
-#-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
-# emerge sys-apps/iproute2
-#
-# For GRE tunnels
-#iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255"
-
-# For IPIP tunnels
-#iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255"
-
-# To configure the interface
-#config_vpn0=( "192.168.0.2 pointopoint 192.168.1.2" ) # ifconfig style
-#config_vpn0=( "192.168.0.2 peer 192.168.1.1" ) # iproute2 style
-
-# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
-# have a non-private address configured on an interface.
-# link_6to4="eth0" # Interface to base it's addresses on
-# config_6to4=( "ip6to4" )
-# You may want to depend on eth0 like so
-#RC_NEED_6to4="net.eth0"
-# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
-# any name and this also works for any configured interface.
-# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
-# sit0 - otherwise use a different name like 6to4 in the example above.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on ESSID. See wireless.example for more details
-
-# To use dns settings such as these, dns_servers_eth0 must be set!
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0=( "timeout 1" "rotate" )
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-#
-# netplug is a package that detects this and requires no extra configuration
-# on your part.
-# emerge sys-apps/netplug
-# or
-# emerge sys-apps/ifplugd
-# and you're done :)
-
-# By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
-# then you can specify a timeout here.
-#plug_timeout="10"
-# A value of 0 means wait forever.
-
-# If you don't want to use netplug on a specific interface but you have it
-# installed, you can disable it for that interface via the modules statement
-#modules_eth0=( "!netplug" )
-# You can do the same for ifplugd
-#
-# You can disable them both with the generic plug
-#modules_eth0=( "!plug" )
-
-# To use specific ifplugd options, fex specifying wireless mode
-#ifplugd_eth0="--api-mode=wlan"
-# man ifplugd for more options
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations. The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue. If preup returns a non-zero value, then
-# interface configuration will be aborted. If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-
-#preup() {
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the mii-diag
-# # package to be installed.
-# if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the ethtool
-# # package to be installed.
-# if ethtool "${IFACE}" | grep -q 'Link detected: no'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#predown() {
-# # The default in the script is to test for NFS root and disallow
-# # downing interfaces in that case. Note that if you specify a
-# # predown() function you will override that logic. Here it is, in
-# # case you still want it...
-# if is_net_fs /; then
-# eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-# return 1
-# fi
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#postup() {
-# # This function could be used, for example, to register with a
-# # dynamic DNS service. Another possibility would be to
-# # send/receive mail once the interface is brought up.
-
-# # Here is an example that allows the use of iproute rules
-# # which have been configured using the rules_eth0 variable.
-# #rules_eth0=(
-# # "from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100"
-# # "from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100"
-# #)
-# local x="rules_${IFVAR}[@@]"
-# local -a rules=( "${!x}" )
-# if [[ -n ${rules} ]] ; then
-# einfo "Adding IP policy routing rules"
-# eindent
-# # Ensure that the kernel supports policy routing
-# if ! ip rule list | grep -q "^" ; then
-# eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-# eerror "in your kernel to use ip rules"
-# else
-# for x in "${rules[@@]}" ; do
-# ebegin "${x}"
-# ip rule add ${x}
-# eend $?
-# done
-# fi
-# eoutdent
-# # Flush the cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-#}
-
-#postdown() {
-# # Enable Wake-On-LAN for every interface except for lo
-# # Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
-# # as well ;)
-# [[ ${IFACE} != "lo" ]] && ethtool -s "${IFACE}" wol g
-
-# Automatically erase any ip rules created in the example postup above
-# if interface_exists "${IFACE}" ; then
-# # Remove any rules for this interface
-# local rule
-# ip rule list | grep " iif ${IFACE}[ ]*" | {
-# while read rule ; do
-# rule="${rule#*:}"
-# ip rule del ${rule}
-# done
-# }
-# # Flush the route cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-# # Return 0 always
-# return 0
-#}
-
-#failup() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}
-
-##############################################################################
-# FORCING MODULES
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-#
-# Loading modules is a slow affair - we have to check each one for the following
-# 1) Code sanity
-# 2) Has the required package been emerged?
-# 3) Has it modified anything?
-# 4) Have all the dependant modules been loaded?
-
-# Then we have to strip out the conflicting modules based on user preference
-# and default configuration and sort them into the correct order.
-# Finally we check the end result for dependencies.
-
-# This, of course, takes valuable CPU time so we provide module forcing as a
-# means to speed things up. We still do *some* checking but not much.
-
-# It is essential that you force modules in the correct order and supply all
-# the modules you need. You must always supply an interface module - we
-# supply ifconfig or iproute2.
-
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-
-# Now that we've warned you twice, here's how to do it
-#modules_force=( "ifconfig" )
-#modules_force=( "iproute2" "dhcpcd" )
-
-# We can also apply this to a specific interface
-#modules_force_eth1=( "iproute2" )
-
-# The below will not work
-#modules_force=( "dhcpcd" )
-# No interface (ifconfig/iproute2)
-#modules_force=( "ifconfig" "essidnet" "iwconfig" )
-# Although it will not crash, essidnet will not work as it has to come after
-# iwconfig
-#modules_force=( "iproute2" "ifconfig" )
-# The interface will be setup twice which will cause problems
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.17.14.52; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/ntp-client
-
-# Command to run to set the clock initially
-# Most people should just leave this line alone ...
-# however, if you know what you're doing, and you
-# want to use ntpd to set the clock, change this to 'ntpd'
-NTPCLIENT_CMD="ntpdate"
-
-# Options to pass to the above command
-# This default setting should work fine but you should
-# change the default 'pool.ntp.org' to something closer
-# to your machine. See http://www.pool.ntp.org/ or
-# try running `netselect -s 3 pool.ntp.org`.
-NTPCLIENT_OPTS="-s -b -u \
- 0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org \
- 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.22.12.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/ntpd
-
-# Options to pass to the ntpd process
-# Most people should leave this line alone ...
-# however, if you know what you're doing, feel free to tweak
-NTPD_OPTS=""
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.17.59.02; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# PCI tweaking article:
-# http://www.gentoo.org/doc/en/articles/hardware-stability-p2.xml
-#
-# Apply to all devices:
-# PCIPARM_ALL="...."
-# Cards also can be addressed by vid:pid or by bus:slot.func
-# (see setpci man page relative to -d and -s options)
-# PCIPARM_(BUS|VENDOR)_#="...."
-# Where # is sequentially numbered from zero.
-
-# Examples:
-# "open up" the PCI bus by allowing fairly long bursts
-# for all devices, increasing performance
-# (equivalent to: setpci -v -d *:* latency_timer=b0)
-#PCIPARM_ALL="latency_timer=b0"
-
-# maximize latency timers for network and audio,
-# allowing them to transmit more data per burst,
-# preventing buffer over/under-run conditions
-#PCIPARM_BUS_0="00:04.0 latency_timer=ff"
-#PCIPARM_BUS_1="01:04.0 latency_timer=ff"
-#PCIPARM_VENDOR_0="1057:3410 latency_timer=ff"
-
-# -v : whether to be verbose about changes
-# -D : dry-run, no commit
-# -f : do not warn if the change is already set
-# (see the setpci manpage for more advanced options)
-SETPCI_OPT="-f"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.17.58.35; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/portmap: config file for /etc/init.d/portmap
-
-# Options for `portmap`.
-# For a full list, just run `portmap -h`.
-#PORTMAP_OPTS="-l"
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.01.23.36.28; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.15.25.02; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# Config file for /etc/init.d/postgrey
-
-# LISTEN TYPE
-# Set to 'inet' if you want to use a TCP socket.
-# Set to 'unix' if you want to use an UNIX socket.
-POSTGREY_TYPE="unix"
-
-# HOST
-# What IP should postgrey bind to?
-# Leave unchanged unless you know what you are doing.
-# (ignored if POSTGREY_TYPE is set to 'unix')
-POSTGREY_HOST="127.0.0.1"
-
-# PORT
-# What TCP port should postgrey listen on?
-# (ignored if POSTGREY_TYPE is set to 'unix')
-POSTGREY_PORT="10030"
-
-# SOCKET
-# Unix socket to listen on, if POSTGREY_TYPE is set to 'unix'.
-# Leave unchanged unless you know what you are doing.
-# (ignored if POSTGREY_TYPE is set to 'inet')
-POSTGREY_SOCKET="/var/spool/postfix/private/postgrey"
-
-# PID
-# Postgrey pid file.
-# Do not change, if you don't know what this is!
-POSTGREY_PID="/var/run/postgrey.pid"
-
-# DELAY
-# How long to delay mail that is greylisted in seconds.
-POSTGREY_DELAY=300
-
-# TEXT
-# The response we'll send back with delayed mail.
-POSTGREY_TEXT="Greylisted for %s seconds"
-
-# Additional Postgrey options
-#
-# -v, --verbose increase verbosity level
-# --max-age=N delete entries older than N days since the last time
-# that they have been seen (default: 30)
-# --retry-window=N allow only N days for the first retrial (default: 2)
-# append 'h' if you want to specify it in hours
-# --greylist-action=A if greylisted, return A to Postfix (default: DEFER_IF_PERMIT)
-# --lookup-by-subnet strip the last 8 bits from IP addresses (default)
-# --lookup-by-host do not strip the last 8 bits from IP addresses
-# --whitelist-clients=FILE default: /etc/postfix/postgrey_whitelist_clients
-# --whitelist-recipients=FILE default: /etc/postfix/postgrey_whitelist_recipients
-#
-# Note that the --whitelist-x options can be specified multiple times, and that
-# per default /etc/postfix/postgrey_whitelist_clients.local is also read, so
-# that you can put there local entries.
-#
-POSTGREY_OPTS=""
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d6 1
-a6 1
-POSTGREY_TYPE="inet"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.20.43.53; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/init.d/pydoc.conf
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.2 2008/06/30 15:10:28 hawking Exp $
-
-# This file contains the configuration information for pydoc's internal
-# webserver. The variables should be rather self explanatory :-)
-
-# Default port for Python's pydoc server
-PYDOC_PORT=7464
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.20.41.39; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/init.d/pydoc.conf
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.2 2008/06/30 15:10:28 hawking Exp $
-
-# This file contains the configuration information for pydoc's internal
-# webserver. The variables should be rather self explanatory :-)
-
-# Default port for Python's pydoc server
-PYDOC_PORT=7464
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.01.53; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/quota: config file for /etc/init.d/quota
-
-# Note: if your console is hooked up to a serial terminal,
-# you prob want to drop the '-v' from the OPTS vars below.
-
-
-# Run quotacheck ?
-RUN_QUOTACHECK="yes"
-
-
-# Options for quotacheck
-QUOTACHECK_OPTS="-avug"
-
-
-# Options for quotaon
-QUOTAON_OPTS="-avug"
-
-
-# Options for quotaoff
-QUOTAOFF_OPTS="-avug"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.19.09.20.12; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/rc: Global config file for the Gentoo RC System
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-
-RC_TTY_NUMBER=12
-
-# Set to "yes" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. NOTE: When RC_PARALLEL_STARTUP
-# is enabled, init script output is replaced with simple "service foo
-# starting/stopping" messages so that output is not mixed up.
-# You can stop this from happening on the command line by passing --verbose
-# to the init script or by setting RC_VERBOSE="yes" below.
-
-RC_PARALLEL_STARTUP="no"
-
-# Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "no" to disable
-# this feature.
-
-RC_INTERACTIVE="yes"
-
-# Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no"
-# NOTE: This does not affect anything hotplug/udev related, just the
-# starting/stopping of the init.d service triggered by hotplug.
-
-RC_HOTPLUG="yes"
-
-# Dynamic /dev managers can trigger coldplug events which cause services to
-# start before we are ready for them. If this happens, we can defer these
-# services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*"
-
-RC_COLDPLUG="yes"
-
-# Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes
-# anyway.
-# Example - RC_PLUG_SERVICES="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-
-RC_PLUG_SERVICES=""
-
-# RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service.
-# The following values are allowed:
-# none - The 'net' service is always considered up.
-# no - This basically means that at least one net.* service besides net.lo
-# must be up. This can be used by notebook users that have a wifi and
-# a static nic, and only wants one up at any given time to have the
-# 'net' service seen as up.
-# lo - This is the same as the 'no' option, but net.lo is also counted.
-# This should be useful to people that do not care about any specific
-# interface being up at boot.
-# yes - For this ALL network interfaces MUST be up for the 'net' service to
-# be considered up.
-
-RC_NET_STRICT_CHECKING="no"
-
-# RC_DOWN_INTERFACE allows you to specify if RC will bring the interface
-# completely down when it stops. The default is yes, but there are some
-# instances where you may not want this to happen such as using Wake On LAN.
-
-RC_DOWN_INTERFACE="yes"
-
-# RC_VOLUME_ORDER allows you to specify, or even remove the volume setup
-# for various volume managers (MD, EVMS2, LVM, DM, etc). Note that they are
-# stopped in reverse order.
-
-RC_VOLUME_ORDER="raid evms lvm dm"
-
-# RC_VERBOSE will make init scripts more verbose. Only networking scripts
-# really use this at this time, and this is useful for trouble shooting
-# any issues you may have.
-# This is also used to re-enable init script output for init scripts
-# started or stopped from the command line.
-
-RC_VERBOSE="no"
-
-# RC_BOOTLOG will generate a log of the boot messages shown on the console.
-# Useful for headless machines or debugging. You need to emerge the
-# app-admin/showconsole package for this to work. Note that this probably
-# won't work correctly with boot splash.
-
-RC_BOOTLOG="no"
-
-# Set to "yes" if you want to benchmark system boot with bootchart.
-# You'll need to emerge the app-benchmarks/bootchart package for this to work.
-
-RC_BOOTCHART="no"
-
-# RC_USE_FSTAB allows you to override the default mount options for the
-# standard /proc, /sys, /dev, and /dev/pts mount points. Note that this
-# is the new way for selecting ramfs/tmpfs/etc... for udev mounting.
-
-RC_USE_FSTAB="no"
-
-# RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files
-# based on your runlevel - if a conf.d file for your profile does not exist
-# then we try and use the default one.
-# To enable runlevel selection at boot, append "softlevel=foobar" to your
-# kernel line to change to the foobar runlevel. Here we would search for
-# /etc/conf.d/<service>.foobar config files before trying to use the default
-# /etc/conf.d/<service>.
-# Note that it is only active if 'softlevel' was specified via the kernel line,
-# and it is intended to use for different grub/lilo entries to specify config
-# changes for say laptops between home and work, where you would have setup
-# 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as needed.
-
-RC_USE_CONFIG_PROFILE="yes"
-
-# RC_FORCE_AUTO tries its best to prevent user interaction during the boot and
-# shutdown process. For example, fsck will automatically be run or volumes
-# remounted to create proper directory trees. This feature can be dangerous
-# and is meant ONLY for headless machines where getting a physical console
-# hooked up is a huge pita.
-
-RC_FORCE_AUTO="no"
-
-# Use this variable to control the /dev management behavior.
-# auto - let the scripts figure out what's best at boot
-# devfs - use devfs (requires sys-fs/devfsd)
-# udev - use udev (requires sys-fs/udev)
-# static - let the user manage /dev (YOU need to create ALL device nodes)
-
-RC_DEVICES="auto"
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup. This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-
-RC_DEVICE_TARBALL="no"
-
-# RC_DMESG_LEVEL sets the level at which logging of messages is done to the
-# console. See dmesg(8) for more info.
-
-RC_DMESG_LEVEL="1"
-
-
-
-
-
-#
-# Controlling start-stop-daemon behavior
-
-# Set to "yes" if start-stop-daemon should always retry killing the
-# service with sig KILL if it fails the first time.
-
-RC_RETRY_KILL="yes"
-
-
-# Set the amount of seconds start-stop-daemon should wait between
-# retries.
-
-RC_RETRY_TIMEOUT=1
-
-
-# Set the amount of times start-stop-daemon should try to kill
-# a service before giving up.
-
-RC_RETRY_COUNT=5
-
-
-# Set to "yes" if start-stop-daemon should fail if the service
-# is marked as started, but not actually running on stop.
-
-RC_FAIL_ON_ZOMBIE="no"
-
-
-# Set to "yes" if start-stop-daemon should attempt to kill
-# any children left in the system.
-# Be careful with this as it really does what it was on the tin.
-# fex, if you're in an ssh process and you restart a service on which ssh
-# depends then your terminal will be killed also.
-
-RC_KILL_CHILDREN="no"
-
-
-# Set the amount of seconds start-stop-daemon waits after starting
-# the daemon to check it is still running. If it's not then we
-# try and stop any children if possible.
-RC_WAIT_ON_START="0.1"
-
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can launch them through other daemons here, for example valgrind.
-# This is only useful for serious debugging of the daemon
-# WARNING: If the script's "stop" function does not supply a PID file then
-# all processes using the same daemon will be killed.
-#RC_DAEMON="/usr/bin/valgrind --tool=memcheck --log-file=/tmp/valgrind.syslog-ng"
-
-# strace needs to be prefixed with --background as it does not detach when
-# it's following
-#RC_DAEMON="--background /usr/sbin/strace -f -o /tmp/strace.syslog-ng"
-
-# Pass ulimit parameters
-#RC_ULIMIT="-u 30"
-
-##############################################################################
-
-
-#
-# Internal configuration variables
-#
-# NB: These are for advanced users, and you should really
-# know what you are doing before changing them!
-#
-
-# rc-scripts dep-cache directory
-#
-# NOTE: Do not remove the next line, as its needed by the baselayout ebuild!
-#
-# svcdir="/var/lib/init.d"
-
-svcdir="/var/lib/init.d"
-
-# Should we mount $svcdir in a ram disk for some speed increase
-# for slower machines, or for the more extreme setups ?
-
-svcmount="no"
-
-# FS type that should be used for $svcdir. Note that you need
-# $svcmount above set to "yes" for this to work ... Currently
-# tmpfs, ramfs, and ramdisk are supported (tmpfs is the default).
-
-svcfstype="tmpfs"
-
-# Size of $svcdir in KB. Note that ramfs doesn't support this
-# due to kernel limitations.
-
-svcsize=2048
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.16.27.03; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/rsyncd: config file for /etc/init.d/rsyncd
-
-# see man pages for rsync or run `rsync --help`
-# for valid cmdline options
-#RSYNC_OPTS=""
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.07.52.12; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@#add "winbind" to the daemon_list if you also want winbind to start
-daemon_list="smbd nmbd"
-
-#----------------------------------------------------------------------------
-# Daemons calls: <daemon_name>_<command_option>
-#----------------------------------------------------------------------------
-my_service_name="samba"
-my_service_PRE="unset TMP TMPDIR"
-my_service_POST=""
-
-#----------------------------------------------------------------------------
-# Daemons calls: <daemon_name>_<command_option>
-#----------------------------------------------------------------------------
-smbd_start_options="-D"
-smbd_start="start-stop-daemon --start --exec /usr/sbin/smbd -- ${smbd_start_options}"
-smbd_stop="start-stop-daemon --stop --exec /usr/sbin/smbd"
-smbd_reload="killall -HUP smbd"
-
-nmbd_start_options="-D"
-nmbd_start="start-stop-daemon --start --exec /usr/sbin/nmbd -- ${nmbd_start_options}"
-nmbd_stop="start-stop-daemon --stop --exec /usr/sbin/nmbd"
-nmbd_reload="killall -HUP nmbd"
-
-winbind_start_options=""
-winbind_start="start-stop-daemon --start --exec /usr/sbin/winbindd -- ${winbind_start_options}"
-winbind_stop="start-stop-daemon --stop --oknodo --exec /usr/sbin/winbindd"
-winbind_reload="killall -HUP winbindd"
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.06.52.36; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd-2.1.21.conf,v 1.2 2007/04/07 13:03:55 chtekk Exp $
-
-# Config file for /etc/init.d/saslauthd
-
-# Initial (empty) options.
-SASLAUTHD_OPTS=""
-
-# Specify the authentications mechanism.
-# **NOTE** For a list see: saslauthd -v
-# Since 2.1.19, add "-r" to options for old behavior,
-# ie. reassemble user and realm to user@@realm form.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -a pam -r"
-SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -a pam"
-
-# Specify the hostname for remote IMAP server.
-# **NOTE** Only needed if rimap auth mechanism is used.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -O localhost"
-
-# Specify the number of worker processes to create.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -n 5"
-
-# Enable credential cache, set cache size and timeout.
-# **NOTE** Size is measured in kilobytes.
-# Timeout is measured in seconds.
-#SASLAUTHD_OPTS="${SASLAUTHD_OPTS} -c -s 128 -t 30"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.16.08.52; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# conf.d file for openldap
-#
-# To enable both the standard unciphered server and the ssl encrypted
-# one uncomment this line or set any other server starting options
-# you may desire.
-#
-# OPTS="-h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
-OPTS="-h 'ldaps:/// ldap:/// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
-# Uncomment the below to use the new slapd configuration for openldap 2.3
-#OPTS="-F /etc/openldap/slapd.d -h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.29.22.15.07; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/smartd: config file for /etc/init.d/smartd
-
-# Insert any other options needed
-SMARTD_OPTS=""
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.06.42.43; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmpd.conf,v 1.8 2006/11/26 21:37:22 cedk Exp $
-
-# Initial (empty) options.
-SNMPD_FLAGS=""
-
-# Enable connection logging.
-#SNMPD_FLAGS="${SNMPD_FLAGS} -a"
-
-# Enable syslog and disable file log.
-#SNMPD_FLAGS="${SNMPD_FLAGS} -Lsd -Lf /dev/null"
-
-# Enable agentx socket as /var/agentx/master
-# *NOTE* Before uncommenting this, make sure
-# the /var/agentx directory exists.
-#SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.06.42.43; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmptrapd.conf,v 1.1 2005/01/28 11:19:25 ka0ttic Exp $
-
-# extra flags to pass to snmptrapd
-SNMPTRAPD_FLAGS=""
-
-# ignore authentication failure traps
-#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -a"
-
-# log messages to specified file
-#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -Lf /var/log/snmptrapd.log"
-
-# log messages to syslog with the specified facility
-# where facility is: 'd' = LOG_DAEMON, 'u' = LOG_USER, [0-7] = LOG_LOCAL[0-7]
-#SNMPTRAPD_FLAGS="${SNMPTRAPD_FLAGS} -Ls d"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.15.48.42; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Config file for /etc/init.d/spamd
-
-
-# ***WARNING***
-# spamd was not designed to listed to an untrusted network. spamd
-# is vulnerable to DoS attacks (and eternal doom) if used to listen
-# to an untrusted network.
-#
-
-
-# Some options:
-#
-# -c to create a per user configuration file
-# -H [dir] to switch home dirs for helper apps, dir optional
-# -i [ip] to listen on the specified IP,
-# 127.0.0.1 if omitted,
-# 0.0.0.0 (ie. all) if given without value;
-# must be used in combination with -A to actually allow
-# connections from anybody but localhost
-# -m limit to set the number of children, default 5
-# -u user the user to run spamd as
-# -L if you want to run no net tests
-#
-# for more help look in man spamd
-#
-# Note: if you plan on using the -u flag to spamd you will need to
-# make sure the location of the PID file is writable by that user.
-# This can be done by making the directory /var/run/spamd and
-# changing the owner to the UID that runs spamd. You will then
-# need to edit $pidfile in /etc/init.d/spamd. This should fix the
-# problem with stop/restart in the init scripts.
-#
-# See http://bugs.gentoo.org/show_bug.cgi?id=70124 for a full
-# explanation.
-
-SPAMD_OPTS="-m 5 -c -H"
-
-# spamd stores its pid in this file. If you use the -u option to
-# run spamd under another user, you might need to adjust it.
-
-PIDFILE="/var/run/spamd.pid"
-
-# SPAMD_NICELEVEL lets you set the 'nice'ness of the running
-# spamd process
-
-# SPAMD_NICELEVEL=5
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.06.55.35; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/sshd: config file for /etc/init.d/sshd
-
-# Where is your sshd_config file stored?
-
-SSHD_CONFDIR="/etc/ssh"
-
-
-# Any random options you want to pass to sshd.
-# See the sshd(8) manpage for more info.
-
-SSHD_OPTS=""
-
-
-# Pid file to use (needs to be absolute path).
-
-#SSHD_PIDFILE="/var/run/sshd.pid"
-
-
-# Path to the sshd binary (needs to be absolute path).
-
-#SSHD_BINARY="/usr/sbin/sshd"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.07.02.11; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# The commented variables in this file are the defaults that are used
-# in the init-script. You don't need to uncomment them except to
-# customize them to different values.
-
-# Options for svnserve
-#SVNSERVE_OPTS="--root=/var/svn"
-
-# User and group as which to run svnserve
-#SVNSERVE_USER="svn"
-#SVNSERVE_GROUP="svnusers"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.21.54.44; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# Config file for /etc/init.d/syslog-ng
-
-# Put any additional options for syslog-ng here.
-# See syslog-ng(8) for more information.
-
-SYSLOG_NG_OPTS=""
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.27.20.49.16; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@export LD_LIBRARY_PATH=".:$LD_LIBRARY_PATH"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.01.06.44.59; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@
-# These are passed to twistd.
-# TWISTD_OPTS="--no_save --logfile=/var/log/twistd -y /etc/twistd.tac"
-# TWISTD_OPTS="--no_save --logfile=/var/log/twistd -f /etc/twistd.tap"
-
-# Make any additions to PYTHONPATH the twistd needs here.
-# PYTHONPATH="/path/to/extra/python/modules"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.20.36.32; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/udev: config file for udev
-
-# We discourage to disable persistent-net!!
-# this may lead to random interface naming
-
-# Disable adding new rules for persistent-net
-persistent_net_disable="no"
-
-# Disable adding new rules for persistent-cd
-# Disabling this will stop new cdrom devices to appear
-# as /dev/{cdrom,cdrw,dvd,dvdrw}
-persistent_cd_disable="no"
-
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup. This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-#
-# As this option is fragile, we recommend you
-# to create your devices in /lib64/udev/devices.
-# These will be copied to /dev on boot.
-#rc_device_tarball="NO"
-
-# udev can trigger coldplug events which cause services to start and
-# kernel modules to be loaded.
-# Services are deferred to start in the boot runlevel.
-# Set rc_coldplug="NO" if you don't want this.
-# If you want module coldplugging but not coldplugging of services then you
-# can disable service coldplugging in baselayout/openrc config files.
-# The setting is named different in different versions.
-# in /etc/rc.conf: rc_hotplug="!*" or
-# in /etc/conf.d/rc: rc_plug_services="!*"
-#rc_coldplug="YES"
-
-
-
-
-# Expert options:
-
-# Disable warning about unreliable kernel/udev combination
-#unreliable_kernel_warning="no"
-
-# Timeout in seconds to wait for processing of uevents at boot.
-# There should be no need to change this.
-#udev_settle_timeout="60"
-
-# Run udevd so that all events are serialized, read more in man udevd at --debug-trace
-#udev_trace="YES"
-
-# Run udevd --debug and write output to /dev/.udev/udev.log
-# Should not be kept on as it fills diskspace slowly
-#udev_debug="YES"
-
-# Run udevadmin monitor to get a log of all events
-# in /dev/.udev/udevmonitor.log
-#udev_monitor="YES"
-
-# Keep udevmonitor running after populating /dev.
-#udev_monitor_keep_running="no"
-
-# Set cmdline options for udevmonitor.
-# could be some of --env --kernel --udev
-#udev_monitor_opts="--env"
-
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/urandom
-
-# Sometimes you want to have urandom start before "localmount"
-# (say for crypt swap), so you will need to customize this
-# behavior. If you have /var on a separate partition, then
-# make sure this path lives on your root device somewhere.
-
-URANDOM_SEED="/var/run/random-seed"
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.18.08.57.19; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/conf.d/wireless:
-# Global wireless config file for net.* rc-scripts
-
-#
-# Usage of /etc/conf.d/wireless is deprecated ... make sure you
-# put all settings in /etc/conf.d/net
-#
-
-
-##############################################################################
-# IMPORTANT
-# linux-wlan-ng is not supported as they have their own configuration program
-# ensure that /etc/conf.d/net has the entry "!iwconfig" in it's modules line
-# Try and use an alternative driver if you need to use this - hostap-driver
-# supports non-usb linux-wlan-ng driven devices
-##############################################################################
-
-##############################################################################
-# HINTS
-##############################################################################
-# Remember to change eth0 to your wireless interface which may be
-# eth0, eth1, wlan0, ath0 - you get the idea. If you're not sure
-# you can type "iwconfig" at the command prompt and it will tell you which
-# interfaces are wireless.
-# Say that your wireless interface is ath0 - the line
-# #essid_eth0="any"
-# becomes
-# #essid_ath0="any"
-#
-# Remember to change ESSID to your ESSID.
-# Say that your ESSID is My NET - the line
-# #key_ESSID="s:passkey"
-# becomes
-# #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (english alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any ESSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your ESSID is
-# My "\ NET
-# it becomes
-# My \"\\ NET
-# for example
-# #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-# #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#
-# As a final note, most users will just need to set the following options
-# key_ESSID1="s:yourkeyhere enc open" # s: means a text key
-# key_ESSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key
-# preferred_aps=( "ESSID1" "ESSID2" )
-#
-# Clear? Good. Now configure your wireless network below
-#########################################################
-
-##############################################################################
-# SETTINGS
-##############################################################################
-# Hard code an ESSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# Set to "any" to connect to any ESSID - the driver picks an Access Point
-# This needs to be done when the driver doesn't support scanning
-# This may work for drivers that don't support scanning but you need automatic
-# AP association
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-
-# However, using ad-hoc (without scanning for APs) and master mode
-# do require the ESSID to be set - do this here
-#essid_eth0="any"
-
-# Set the mode of the interface (managed, ad-hoc, master or auto)
-# The default is auto
-# If it's ad-hoc or master you also may need to specify the channel below
-#mode_eth0="auto"
-
-# If managed mode fails, drop to ad-hoc mode with the below ESSID?
-#adhoc_essid_eth0="WLAN"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the iwconfig argument
-# without the iwconfig $iface.
-#iwconfig_eth0=""
-
-# Set private driver ioctls. This is basically the iwpriv argument without
-# the iwpriv $iface. If you use the rt2500 driver (not the rt2x00 one) then
-# you can set WPA here, below is an example.
-#iwpriv_eth0=""
-#iwpriv_ESSID=(
-# "set AuthMode=WPAPSK"
-# "set EncrypType=TKIP"
-# "set WPAPSK=yourpasskey"
-#)
-#NOTE: Even though you can use WPA like so, you may have to set a WEP key
-#if your driver claims the AP is encrypted. The WEP key itself will not be
-#used though.
-
-# Seconds to wait before scanning
-# Some drivers need to wait until they have finished "loading"
-# before they can scan - otherwise they error and claim that they cannot scan
-# or resource is unavailable. The default is to wait zero seconds
-#sleep_scan_eth0="1"
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# By default a successful association in Managed mode sets the MAC
-# address of the AP connected to. However, some drivers (namely
-# the ipw2100) don't set an invalid MAC address when association
-# fails - so we need to check on link quality which some drivers
-# don't report properly either.
-# So if you have connection problems try flipping this setting
-# Valid options are MAC, quality and all - defaults to MAC
-#associate_test_eth0="MAC"
-
-# Some driver/card combinations need to scan in Ad-Hoc mode
-# After scanning, the mode is reset to the one defined above
-#scan_mode_eth0="Ad-Hoc"
-
-# Below you can define private ioctls to run before and after scanning
-# Format is the same as the iwpriv_eth0 above
-# This is needed for the HostAP drivers
-#iwpriv_scan_pre_eth0="host_roaming 2"
-#iwpriv_scan_post_eth0="host_roaming 0"
-
-# Define a WEP key per ESSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point
-# You can't use "any" for an ESSID here
-#key_ESSID="1234-1234-1234-1234-1234-1234-56"
-# or you can use strings. Passphrase IS NOT supported
-# To use a string, prefix it with s:
-# Note - this example also sets the encryption method to open
-# which is regarded as more secure than restricted
-#key_ESSID="s:foobar enc open"
-#key_ESSID="s:foobar enc restricted"
-
-# If you have whitespace in your key, here's how to set it and use other
-# commands like using open encryption.
-#key_ESSID="s:'foo bar' enc open"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="s:foobar"
-
-# Here are some more examples of keys as some users find others work
-# and some don't where they should all do the same thing
-#key_ESSID="open s:foobar"
-#key_ESSID="open 1234-5678-9012"
-#key_ESSID="s:foobar enc open"
-#key_ESSID="1234-5678-9012 enc open"
-
-# You may want to set multiple keys - here's an example
-# It sets 4 keys on the card and instructs to use key 2 by default
-#key_ESSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per ESSID - which is very handy if you use different networks a lot
-#config_ESSID=( "dhcp" )
-#dhcpcd_ESSID="-t 5"
-#routes_ESSID=()
-#fallback_ESSID=()
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" )
-#dns_domain_ESSID="some.domain"
-#dns_search_path_ESSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# in case you use Access Points with the same ESSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455=( "dhcp" )
-#dhcpcd_001122334455="-t 10"
-#dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
-
-# Map a MAC address to an ESSID
-# This is used when the Access Point is not broadcasting it's ESSID
-# WARNING: This will override the ESSID being broadcast due to some
-# Access Points sending an ESSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and ESSID to the ESSID
-# it should map to
-#mac_essid_001122334455="ESSID"
-
-# This lists the preferred ESSIDs to connect to in order
-# ESSID's can contain any characters here as they must match the broadcast
-# ESSID exactly.
-# Surround each ESSID with the " character and separate them with a space
-# If the first ESSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps=( "ESSID 1" "ESSID 2" )
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0=( "ESSID 3" "ESSID 4" )
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then any
-# other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forcibly connect to APs in order if it does not find
-# them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
-# to scan
-# "forceany" does the same as forcepreferred + connects to any other available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps=( "ESSID 1" "ESSID 2" )
-#blacklist_aps_eth0=( "ESSID 3" ESSID 4" )
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps list ignores blacklisted_aps - so if you have
-# the same ESSID in both, well, you're a bit silly :p
-
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Two functions can be defined which will be called surrounding the
-# associate function. The functions are called with the interface
-# name first so that one function can control multiple adapters.
-#
-# The return values for the preassociate function should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue. If preassociate returns a non-zero value, then
-# interface configuration will be aborted.
-#
-# The return value for the postassociate function is ignored
-# since there's nothing to do if it indicates failure.
-
-#preassociate() {
-# # The below adds two configuration variables leap_user_ESSID
-# # and leap_pass_ESSID. When they are both configured for the ESSID
-# # being connected to then we run the CISCO LEAP script
-#
-# local user pass
-# eval user=\"\$\{leap_user_${ESSIDVAR}\}\"
-# eval pass=\"\$\{leap_pass_${ESSIDVAR}\}\"
-#
-# if [[ -n ${user} && -n ${pass} ]]; then
-# if [[ ! -x /opt/cisco/bin/leapscript ]]; then
-# eend "For LEAP support, please emerge net-misc/cisco-aironet-client-utils"
-# return 1
-# fi
-# einfo "Waiting for LEAP Authentication on \"${ESSID//\\\\//}\""
-# if /opt/cisco/bin/leapscript ${user} ${pass} | grep -q 'Login incorrect'; then
-# ewarn "Login Failed for ${user}"
-# return 1
-# fi
-# fi
-#
-# return 0
-#}
-
-#postassociate() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-# # Return 0 always
-# return 0
-#}
-@
-# Copyright 1999-2005 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /etc/conf.d/.rcs/auditd,v 1.1 2010/11/30 21:59:04 root Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/auditd-conf.d-2.1.3,v 1.1 2011/09/11 02:58:55 robbat2 Exp $
# Configuration options for auditd
# -f for foreground mode
# Audit rules file to run before and after stopping auditd
RULEFILE_STOP_PRE=/etc/audit/audit.rules.stop.pre
RULEFILE_STOP_POST=/etc/audit/audit.rules.stop.post
+
+# If you want to enforce a certain locale for auditd,
+# uncomment one of the next lines:
+#AUDITD_LANG=none
+AUDITD_LANG=C
+#AUDITD_LANG=en_US
+#AUDITD_LANG=en_US.UTF-8
# AUTH_CONF_FILE - set the default location for the SASL
# authentication configuration file.
#
-#AUTH_CONF_FILE="/etc/autofs/autofs_ldap_auth.conf"
+#AUTH_CONF_FILE="/etc/autofs_ldap_auth.conf"
#
# MAP_HASH_TABLE_SIZE - set the map cache hash table size.
# Should be a power of 2 with a ratio roughly
+++ /dev/null
-# /etc/conf.d/env_whitelist: Environment whitelist for rc-system
-
-# Specify which variables are allowed to be passed from the environment to the
-# rc-system. If it is not set by the environment, then the variable will be
-# taken from /etc/profile.env - meaning, if you need to set LANG or such,
-# do it in a /etc/env.d/99myownstuff file for example, and run env-update.
# --export-all --- Exports all repositories
# --port=XXXX --- Starts in port XXXX instead of 9418
#
-#GITDAEMON_OPTS="--syslog --export-all --verbose /var/lib/git"
+#GITDAEMON_OPTS="--syslog /var/git"
GITDAEMON_OPTS="--syslog --verbose --base-path=/var/lib/git /var/lib/git"
# To run an anonymous git safely, the following user should be able to only
# Use keymap to specify the default console keymap. There is a complete tree
# of keymaps in /usr/share/keymaps to choose from.
-
#keymap="us"
keymap="de-latin1-nodeadkeys"
# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
# To fix this, set to "yes"
fix_euro="NO"
+
-# Generated by sensors-detect on Wed Dec 1 23:57:50 2010
+# Generated by sensors-detect on Tue Jul 24 10:07:08 2012
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
-# Here is where we define which server(s) to start.
-# Additional parameters to be passed to mysqld at startup may be added here,
-# which will override the ones in "my.cnf".
-#
-# Below are described some suggested parameters to use.
-# The parameters not recognized will be passed through to the mysqld daemon
-# directly!
-# To avoid starting a server just comment it's definition.
-#
-# Last but not least, SPACES are NOT allowed inside the parameters!
-#
-# Parameter : description
-# ----------------+-----------------------------------------------------------
-# nice : integer [-20 .. 19 ] default 0
-# : change the priority of the server -20 (high) to 19 (low)
-# : see "man nice 1" for description
-# ----------------+-----------------------------------------------------------
-# mycnf : string [full path to my.cnf]
-# : specify the path to my.cnf file to be used
-# ----------------+-----------------------------------------------------------
-# startup_timeout : integer [seconds] default 15
-# : time to wait for mysqld up and running, after this it's
-# : marked as failed
-# ----------------+-----------------------------------------------------------
-#
-# Additional parameters
-# Parameter : description
-# ----------------+-----------------------------------------------------------
-# server-id : integer [1 .. 255]
-# : Uniquely identifies the server instance in the community
-# : of replication partners.
-# ----------------+-----------------------------------------------------------
-# port : integer [1025 .. 65535] default 3306
-# : Port number to use for connection.
-# : Looses any meaning if skip-networking is set.
-# ----------------+-----------------------------------------------------------
-# skip-networking : NULL
-# : Don't allow connection through TCP/IP.
-# ----------------+-----------------------------------------------------------
-# log-bin : string [name of the binlog files]
-# : Log update queries in binary format. Optional (but
-# : strongly recommended to avoid replication problems if
-# : server's hostname changes) argument should be the chosen
-# : location for the binary log files.
-# ----------------+-----------------------------------------------------------
-# Additionally the following variables are recognized:
-#
-# Be more verbose, accepts values from 1 to 4
-#DEBUG=4
-#
-# The default location for the "master" pid file
-#MYSQL_GLOB_PID_FILE="/var/run/svc-started-mysqld"
-#
-# The timeout for a failed attempt to stop a server
-#STOPTIMEOUT=120
-#
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.53-conf.d,v 1.2 2011/01/15 17:54:31 robbat2 Exp $
-# The parameters are passed in a bash array variable,
-# the variable name is mysql_slot_0_[server-num]
-# "server-num" is an optional number used to start multiple servers
-#
-# Examples:
-#
-# start a default server with default options:
-#mysql_slot_0=()
-#
-# start MySQL reniced, overriding some start parameters
-#mysql_slot_0=(
-# "nice=-5"
-# "server-id=123"
-# "log-bin="myhost"
-# "port=3307"
-#)
-#
-# start another server, different my.cnf
-#mysql_slot_0_1=(
-# "mycnf=/home/test/my.cnf"
-# "server-id=124"
-#)
-#
+# If you want a non-stock location for the config file, uncomment or update
+# either of these as needed. If you do use it, you must make sure that none of
+# your socket, pidfile, datadir, logfiles, binary logs, relay logs or InnoDB
+# files collide with each other.
+MY_CNF="/etc/mysql/my.cnf"
+#MY_CNF="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
+#MY_CNF="${MY_CNF:-/etc/mysql/my-${SVCNAME/mysql.}.cnf}"
+
+# Place any additional arguments here that you might need
+# Common/useful options:
+# --skip-slave-start=1 - For bringing up replication initially
+# --server-id=NNN - Server ID for replication
+# --skip-networking - lock it down to UNIX sockets only
+MY_ARGS=""
+
+# This setting (in seconds) should be high enough to allow InnoDB to do a full
+# checkpoint recovery. 900 is the default used in the upstream RPM startup
+# scripts. 30 seconds should be sufficent if you just have a tiny <1GiB
+# database. After the core startup is done, we wait this long for the UNIX
+# socket to appear.
+STARTUP_TIMEOUT="900"
+
+# This is how long, in milliseconds, we wait for pidfile to be created, early
+# in the startup.
+STARTUP_EARLY_TIMEOUT="1000"
+
+# How long (in seconds) should we wait for shutdown?
+STOP_TIMEOUT=120
+
+# integer [-20 .. 19 ] default 0
+# change the priority of the server -20 (high) to 19 (low)
+# see nice(1) for description
+#NICE=0
+
+# See start-stop-daemon(8) for possible settings
+#IONICE=2
+
+# If defined, --verbose gets passed to S-S-D
+#DEBUG=1
+
+# Depending on your usage of MySQL, you may also wish to start it after some
+# other services are up. Uncomment the lines below as needed. If these aren't
+# enough for you, we encourage you to file a bug, and help us understand how
+# you are using MySQL.
+
+# Do your MySQL ACLs refer to hostnames not in your /etc/hosts?
+# If so, you need DNS before you can accept connections.
+# Avoid dependency circular loops if you use MySQL to power a local DNS server.
+#rc_use="dns"
+#rc_after="dns"
+
+# Does your MySQL bind to an IP on an interface other than net.lo?
+# Alternatively you might wish to specify the exact interface here.
+#rc_use="net"
+#rc_after="net"
+
+# Do you store your MySQL files on a SAN or other network filesystem, that is
+# provided by the netmount init script?
+#rc_need="netmount"
+
+# Or from NFS? P.S. This is not a good idea in most cases, but does have some
+# valid usage cases, so we provide the option.
+#rc_need="nfsmount"
+
+# Should any one of the instances satisfy the requirement for MySQL coming up?
+# By default, we say no.
+[ "${SVCNAME}" != mysql ] && rc_provide="!mysql"
+# But uncomment this next instead if you think it should.
+#rc_provide="mysql"
+
+# The conditional above has a false-positive "failure" return value as a
+# side-effect, and since it's the last statement, without the next line, this
+# script returns failure.
+return 0
+# vim: ft=gentoo-conf-d et ts=4 sw=4:
+++ /dev/null
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.53-conf.d,v 1.2 2011/01/15 17:54:31 robbat2 Exp $
-
-# If you want a non-stock location for the config file, uncomment or update
-# either of these as needed. If you do use it, you must make sure that none of
-# your socket, pidfile, datadir, logfiles, binary logs, relay logs or InnoDB
-# files collide with each other.
-MY_CNF="/etc/mysql/my.cnf"
-#MY_CNF="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-#MY_CNF="${MY_CNF:-/etc/mysql/my-${SVCNAME/mysql.}.cnf}"
-
-# Place any additional arguments here that you might need
-# Common/useful options:
-# --skip-slave-start=1 - For bringing up replication initially
-# --server-id=NNN - Server ID for replication
-# --skip-networking - lock it down to UNIX sockets only
-MY_ARGS=""
-
-# This setting (in seconds) should be high enough to allow InnoDB to do a full
-# checkpoint recovery. 900 is the default used in the upstream RPM startup
-# scripts. 30 seconds should be sufficent if you just have a tiny <1GiB
-# database. After the core startup is done, we wait this long for the UNIX
-# socket to appear.
-STARTUP_TIMEOUT="900"
-
-# This is how long, in milliseconds, we wait for pidfile to be created, early
-# in the startup.
-STARTUP_EARLY_TIMEOUT="1000"
-
-# How long (in seconds) should we wait for shutdown?
-STOP_TIMEOUT=120
-
-# integer [-20 .. 19 ] default 0
-# change the priority of the server -20 (high) to 19 (low)
-# see nice(1) for description
-#NICE=0
-
-# See start-stop-daemon(8) for possible settings
-#IONICE=2
-
-# If defined, --verbose gets passed to S-S-D
-#DEBUG=1
-
-# Depending on your usage of MySQL, you may also wish to start it after some
-# other services are up. Uncomment the lines below as needed. If these aren't
-# enough for you, we encourage you to file a bug, and help us understand how
-# you are using MySQL.
-
-# Do your MySQL ACLs refer to hostnames not in your /etc/hosts?
-# If so, you need DNS before you can accept connections.
-# Avoid dependency circular loops if you use MySQL to power a local DNS server.
-#rc_use="dns"
-#rc_after="dns"
-
-# Does your MySQL bind to an IP on an interface other than net.lo?
-# Alternatively you might wish to specify the exact interface here.
-#rc_use="net"
-#rc_after="net"
-
-# Do you store your MySQL files on a SAN or other network filesystem, that is
-# provided by the netmount init script?
-#rc_need="netmount"
-
-# Or from NFS? P.S. This is not a good idea in most cases, but does have some
-# valid usage cases, so we provide the option.
-#rc_need="nfsmount"
-
-# Should any one of the instances satisfy the requirement for MySQL coming up?
-# By default, we say no.
-[ "${SVCNAME}" != mysql ] && rc_provide="!mysql"
-# But uncomment this next instead if you think it should.
-#rc_provide="mysql"
-
-# The conditional above has a false-positive "failure" return value as a
-# side-effect, and since it's the last statement, without the next line, this
-# script returns failure.
-return 0
-# vim: ft=gentoo-conf-d et ts=4 sw=4:
+++ /dev/null
-# Here is where we define which server(s) to start.
-# Additional parameters to be passed to mysqlmanager at startup may be added here,
-# which will override the ones in "my.cnf".
-#
-# To avoid starting a server just comment it's definition
-# here or it will rant (no default start).
-# Last but not least, spaces are NOT allowed inside the parameters!
-#
-# Below are described some suggested parameters to use.
-# The parameters not recognized will be passed through to the mysqlmanager directly.
-#
-# Parameter : description
-
-# ----------------+-----------------------------------------------------------
-# mycnf : string [full path to my.cnf]
-# : specify the path to my.cnf file to be used
-# : may contain a [manager] section
-# ----------------+-----------------------------------------------------------
-#
-# Basic default
-#
-#mysqlmanager_slot_0=()
-#
-# Start MySQL 5.0.X overriding the my.cnf path
-#mysqlmanager_slot_500=(
-# "mycnf=/home/test/my.cnf"
-#)
-#
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
-# please review /etc/conf.d/net.example and save your configuration
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).
dns_domain_lo="brehm-online.com"
dns_servers_lo="127.0.0.1 81.169.163.106 85.214.7.22"
dns_search_lo="brehm-online.com brehm-online.eu brehm-berlin.de serverkompetenz.net"
-#config_eth0=(
-# "85.214.134.152/32 brd 85.214.134.152"
-# "85.214.109.1/32 brd 85.214.109.1"
-# "2a01:238:4225:6e00:8f8c:808a:7fb8:88df/128"
-#)
-config_eth0="85.214.134.152/32 85.214.109.1/32 2a01:238:4225:6e00:8f8c:808a:7fb8:88df/128"
+dns_domain_eth0="brehm-online.com"
+dns_servers_eth0="127.0.0.1 81.169.163.106 85.214.7.22"
+dns_search_eth0="brehm-online.com brehm-online.eu brehm-berlin.de serverkompetenz.net"
-#routes_eth0=(
-# "default via 192.168.0.1" # IPv4 default route
-# "10.0.0.0/8 via 192.168.0.1" # IPv4 subnet route
-# "::/0" # IPv6 unicast
-#)
-
-# 85.214.128.1 dev eth0 scope link
-# 169.254.0.0/16 dev eth0 scope link
-# default via 85.214.128.1 dev eth0
-
-#routes_eth0=(
-# "85.214.128.1 dev eth0 scope link"
-# "169.254.0.0/16 dev eth0 scope link"
-# "default via 85.214.128.1"
-#)
-# "-family inet6 default via fe80::1 dev eth0"
routes_eth0="85.214.128.1 dev eth0 scope link
169.254.0.0/16 dev eth0 scope link
default via 85.214.128.1
"
-dns_domain_eth0="brehm-online.com"
-dns_servers_eth0="127.0.0.1 81.169.163.106 85.214.7.22"
-dns_search_eth0="brehm-online.com brehm-online.eu brehm-berlin.de serverkompetenz.net"
+config_eth0="85.214.134.152/32 85.214.109.1/32 2a01:238:4225:6e00:8f8c:808a:7fb8:88df/128"
+
+postup() {
+ case "${IFVAR}" in
+ eth0)
+ /sbin/ip -6 route add default via fe80::1 dev eth0
+ ;;
+ esac
+ return 0
+}
+
+predown() {
+ case "${IFVAR}" in
+ eth0)
+ /sbin/ip -6 route del default via fe80::1 dev eth0
+ ;;
+ esac
+ return 0
+}
+
+
+# vim: ts=4 expandtab
+++ /dev/null
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatability with existing ones.
-#
-# Modules load by default if the package they need is installed. If
-# you specify a module here that doesn't have it's package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-# Prefer ifconfig over iproute2
-#modules=( "ifconfig" )
-
-# You can also specify other modules for an interface
-# In this case we prefer udhcpc over dhcpcd
-#modules_eth0=( "udhcpc" )
-
-# You can also specify which modules not to use - for example you may be
-# using a supplicant or linux-wlan-ng to control wireless configuration but
-# you still want to configure network settings per ESSID associated with.
-#modules=( "!iwconfig" "!wpa_supplicant" )
-# IMPORTANT: If you need the above, please disable modules in that order
-
-
-##############################################################################
-# INTERFACE HANDLERS
-#
-# We provide two interface handlers presently: ifconfig and iproute2.
-# You need one of these to do any kind of network configuration.
-# For ifconfig support, emerge sys-apps/net-tools
-# For iproute2 support, emerge sys-apps/iproute2
-
-# If you don't specify an interface then we prefer iproute2 if it's installed
-# To prefer ifconfig over iproute2
-#modules=( "ifconfig" )
-
-# For a static configuration, use something like this
-# (They all do exactly the same thing btw)
-#config_eth0=( "192.168.0.2/24" )
-#config_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-
-# We can also specify a broadcast
-#config_eth0=( "192.168.0.2/24 brd 192.168.0.255" )
-#config_eth0=( "192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" )
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-# (eth0:1, eth0:2, etc)
-# iproute2 does not do this as there is no need to
-#config_eth0=(
-# "192.168.0.2/24"
-# "192.168.0.3/24"
-# "192.168.0.4/24"
-#)
-# Or you can use sequence expressions
-#config_eth0=( "192.168.0.{2..4}/24" )
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0=(
-# "192.168.0.2/24"
-# "4321:0:1:2:3:4:567:89ab/64"
-# "4321:0:1:2:3:4:567:89ac/64"
-#)
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0=( "noop" "192.168.0.2/24" )
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0=( "null" )
-
-# Here's how to do routing if you need it
-#routes_eth0=(
-# "default via 192.168.0.1" # IPv4 default route
-# "10.0.0.0/8 via 192.168.0.1" # IPv4 subnet route
-# "::/0" # IPv6 unicast
-#)
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-#fallback_route_eth0=( "default via 192.168.0.1" )
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-
-# Each module described below can set a default base metric, lower is
-# preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
-#metric_eth0="100"
-# or on a global basis
-#metric="100"
-# The only downside of the global setting is that you have to ensure that
-# there are no conflicting routes yourself. For users with large routing
-# tables you may have to set a global metric as the due to a simple read of
-# the routing table taking over a minute at a time.
-
-##############################################################################
-# OPTIONAL MODULES
-
-# INTERFACE RENAMING
-# There is no consistent device renaming scheme for Linux.
-# The preferred way of naming devices is via the kernel module directly or
-# by using udev (http://www.reactivated.net/udevrules.php)
-
-# If you are unable to write udev rules, then we do provide a way of renaming
-# the interface based on it's MAC address, but it is not optimal.
-# Here is how to rename an interface whose MAC address is 00:11:22:33:44:55
-# to foo1
-#rename_001122334455="foo1"
-
-# You can also do this based on current device name - although this is not
-# recommended. Here we rename eth1 to foo2.
-#rename_eth1="foo2"
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by iwconfig or wpa_supplicant
-
-# iwconfig
-# emerge net-wireless/wireless-tools
-# Wireless options are held in /etc/conf.d/wireless - but could be here too
-# Consult the sample file /etc/conf.d/wireless.example for instructions
-# iwconfig is the default
-
-# wpa_supplicant
-# emerge net-wireless/wpa_supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-# To choose wpa_supplicant over iwconfig
-#modules=( "wpa_supplicant" )
-# To configure wpa_supplicant
-#wpa_supplicant_eth0="-Dwext" # For generic wireless
-#wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
-# Consult wpa_supplicant for more drivers
-# By default don't wait for wpa_suppliant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# GENERIC WIRELESS OPTIONS
-# PLEASE READ THE INSTRUCTIONS IN /etc/conf.d/wireless.example FOR
-# HOW TO USE THIS ESSID VARIABLE
-# You can also override any settings found here per ESSID - which is very
-# handy if you use different networks a lot
-#config_ESSID=( "dhcp" )
-#dhcpcd_ESSID="-t 5"
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# set dhcp_ESSID="nodns"
-#dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" )
-#dns_domain_ESSID="some.domain"
-#dns_search_ESSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search are mutually exclusive.
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same ESSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455=( "dhcp" )
-#mac_dhcpcd_001122334455="-t 10"
-#mac_dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
-
-# When an interface has been associated with an Access Point, a global
-# variable called ESSID is set to the Access Point's ESSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed any of the above packages, you need to disable them
-#modules=( "!iwconfig" "!wpa_supplicant" )
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc.
-#
-# dhclient: emerge net-misc/dhcp
-# dhcpcd: emerge net-misc/dhcpcd
-# pump: emerge net-misc/pump
-# udhcpc: emerge net-misc/udhcp
-
-# If you have more than one DHCP client installed, you need to specify which
-# one to use - otherwise we default to dhcpcd if available.
-#modules=( "dhclient" ) # to select dhclient over dhcpcd
-#
-# Notes:
-# - All clients send the current hostname to the DHCP server by default
-# - dhcpcd does not daemonize when the lease time is infinite
-# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers
-# - pump does not support getting NIS servers
-# - DHCP tends to erase any existing device information - so add
-# static addresses after dhcp if you need them
-# - dhclient and udhcpc can set other resolv.conf options such as "option"
-# and "sortlist"- see the System module for more details
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0=( "dhcp" )
-
-# For passing custom options to dhcpcd use something like the following. This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# dhclient, udhcpc and pump don't have many runtime options
-# You can pass options to them in a similar manner to dhcpcd though
-#dhclient_eth0="..."
-#udhcpc_eth0="..."
-#pump_eth0="..."
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release it's lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-#-----------------------------------------------------------------------------
-# For APIPA support, emerge net-misc/iputils or net-analyzer/arping
-
-# APIPA is a module that tries to find a free address in the range
-# 169.254.0.0-169.254.255.255 by arping a random address in that range on the
-# interface. If no reply is found then we assign that address to the interface
-
-# This is only useful for LANs where there is no DHCP server and you don't
-# connect directly to the internet.
-#config_eth0=( "dhcp" )
-#fallback_eth0=( "apipa" )
-
-#-----------------------------------------------------------------------------
-# ARPING Gateway configuration
-# and
-# Automatic Private IP Addressing (APIPA)
-# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping
-#
-# This is a module that tries to find a gateway IP. If it exists then we use
-# that gateways configuration for our own. For the configuration variables
-# simply ensure that each octet is zero padded and the dots are removed.
-# Below is an example.
-#
-#gateways_eth0="192.168.0.1 10.0.0.1"
-#config_192168000001=( "192.168.0.2/24" )
-#routes_192168000001=( "default via 192.168.0.1" )
-#dns_servers_192168000001=( "192.168.0.1" )
-#config_010000000001=( "10.0.0.254/8" )
-#routes_010000000001=( "default via 10.0.0.1" )
-#dns_servers_010000000001=( "10.0.0.1" )
-
-# We can also specify a specific MAC address for each gateway if different
-# networks have the same gateway.
-#gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF"
-#config_192168000001_001122AABBCC=( "192.168.0.2/24" )
-#routes_192168000001_001122AABBCC=( "default via 192.168.0.1" )
-#dns_servers_192168000001_001122AABBCC=( "192.168.0.1" )
-#config_010000000001_334455DDEEFF=( "10.0.0.254/8" )
-#routes_010000000001_334455DDEEFF=( "default via 10.0.0.1" )
-#dns_servers_010000000001_334455DDEEFF=( "10.0.0.1" )
-
-# If we don't find any gateways (or there are none configured) then we try and
-# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255
-# by arping a random address in that range on the interface. If no reply is
-# found then we assign that address to the interface.
-
-# This is only useful for LANs where there is no DHCP server.
-#config_eth0=( "arping" )
-
-# or if no DHCP server can be found
-#config_eth0=( "dhcp" )
-#fallback_eth0=( "arping" )
-
-# NOTE: We default to sleeping for 1 second the first time we attempt an
-# arping to give the interface time to settle on the LAN. This appears to
-# be a good default for most instances, but if not you can alter it here.
-#arping_sleep=5
-#arping_sleep_lan=7
-
-# NOTE: We default to waiting 3 seconds to get an arping response. You can
-# change the default wait like so.
-#arping_wait=3
-#arping_wait_lan=2
-
-#-----------------------------------------------------------------------------
-# VLAN (802.1q support)
-# For VLAN support, emerge net-misc/vconfig
-
-# Specify the VLAN numbers for the interface like so
-# Please ensure your VLAN IDs are NOT zero-padded
-#vlans_eth0="1 2"
-
-# You may not want to assign an IP the the physical interface, but we still
-# need it up.
-#config_eth0=( "null" )
-
-# You can also configure the VLAN - see for vconfig man page for more details
-#vconfig_eth0=( "set_name_type VLAN_PLUS_VID_NO_PAD" )
-#vconfig_vlan1=( "set_flag 1" "set_egress_map 2 6" )
-#config_vlan1=( "172.16.3.1 netmask 255.255.254.0" )
-#config_vlan2=( "172.16.2.1 netmask 255.255.254.0" )
-
-# NOTE: Vlans can be configured with a . in their interface names
-# When configuring vlans with this name type, you need to replace . with a _
-#config_eth0.1=( "dhcp" ) - does not work
-#config_eth0_1=( "dhcp" ) - does work
-
-# NOTE: Vlans are controlled by their physical interface and not per vlan
-# This means you do not need to create init scripts in /etc/init.d for each
-# vlan, you must need to create one for the physical interface.
-# If you wish to control the configuration of each vlan through a separate
-# script, or wish to rename the vlan interface to something that vconfig
-# cannot then you need to do this.
-#vlan_start_eth0="no"
-
-# If you do the above then you may want to depend on eth0 like so
-# RC_NEED_vlan1="net.eth0"
-# NOTE: depend functions only work in /etc/conf.d/net
-# and not in profile configs such as /etc/conf.d/net.foo
-
-#-----------------------------------------------------------------------------
-# Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
-
-# To bond interfaces together
-#slaves_bond0="eth0 eth1 eth2"
-#config_bond0=( "null" ) # You may not want to assign an IP the the bond
-
-# If any of the slaves require extra configuration - for example wireless or
-# ppp devices - we need to depend function on the bonded interfaces
-#RC_NEED_bond0="net.eth0 net.eth1"
-
-
-#-----------------------------------------------------------------------------
-# Classical IP over ATM
-# For CLIP support emerge net-dialup/linux-atm
-
-# Ensure that you have /etc/atmsigd.conf setup correctly
-# Now setup each clip interface like so
-#clip_atm0=( "peer_ip [if.]vpi.vci [opts]" ... )
-# where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection
-# with your ISP, your only peer is usually the ISP gateway closest to you),
-# "if" is the number of the ATM interface which will carry the PVC, "vpi.vci"
-# is the ATM VC address, and "opts" may optionally specify VC parameters like
-# qos, pcr, and the like (see "atmarp -s" for further reference). Please also
-# note quoting: it is meant to distinguish the VCs you want to create. You may,
-# in example, create an atm0 interface to more peers, like this:
-#clip_atm0=( "1.1.1.254 0.8.35" "1.1.1.253 1.8.35" )
-
-# By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a
-# null encapsulation (aka "VC mode"), please add the keyword "null" to opts.
-
-
-#-----------------------------------------------------------------------------
-# PPP
-# For PPP support, emerge net-dialup/ppp
-# PPP is used for most dialup connections, including ADSL.
-# The older ADSL module is documented below, but you are encouraged to try
-# this module first.
-#
-# You need to create the PPP net script yourself. Make it like so
-#ln -s net.lo /etc/init.d/net.ppp0
-#
-# We have to instruct ppp0 to actually use ppp
-#config_ppp0=( "ppp" )
-#
-# Each PPP interface requires an interface to use as a "Link"
-#link_ppp0="/dev/ttyS0" # Most PPP links will use a serial port
-#link_ppp0="eth0" # PPPoE requires an ethernet interface
-#link_ppp0="[itf.]vpi.vci" # PPPoA requires the ATM VC's address
-#link_ppp0="/dev/null" # ISDN links should have this
-#link_ppp0="pty 'your_link_command'" # PPP links over ssh, rsh, etc
-#
-# Here you should specify what pppd plugins you want to use
-# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius,
-# radattr, radrealms and winbind
-#plugins_ppp0=(
-# "pppoe" # Required plugin for PPPoE
-# "pppoa vc-encaps" # Required plugin for PPPoA with an option
-# "capi" # Required plugin for ISDN
-#)
-#
-# PPP requires at least a username. You can optionally set a password here too
-# If you don't, then it will use the password specified in /etc/ppp/*-secrets
-# against the specified username
-#username_ppp0='user'
-#password_ppp0='password'
-# NOTE: You can set a blank password like so
-#password_ppp0=
-#
-# The PPP daemon has many options you can specify - although there are many
-# and may seem daunting, it is recommended that you read the pppd man page
-# before enabling any of them
-#pppd_ppp0=(
-# "maxfail 0" # WARNING: It's not recommended you use this
-# # if you don't specify maxfail then we assume 0
-# "updetach" # If not set, "/etc/init.d/net.ppp0 start" will return
-# # immediately, without waiting the link to come up
-# # for the first time.
-# # Do not use it for dial-on-demand links!
-# "debug" # Enables syslog debugging
-# "noauth" # Do not require the peer to authenticate itself
-# "defaultroute" # Make this PPP interface the default route
-# "usepeerdns" # Use the DNS settings provided by PPP
-#
-# On demand options
-# "demand" # Enable dial on demand
-# "idle 30" # Link goes down after 30 seconds of inactivity
-# "10.112.112.112:10.112.112.113" # Phony IP addresses
-# "ipcp-accept-remote" # Accept the peers idea of remote address
-# "ipcp-accept-local" # Accept the peers idea of local address
-# "holdoff 3" # Wait 3 seconds after link dies before re-starting
-#
-# Dead peer detection
-# "lcp-echo-interval 15" # Send a LCP echo every 15 seconds
-# "lcp-echo-failure 3" # Make peer dead after 3 consective
-# # echo-requests
-#
-# Compression options - use these to completely disable compression
-# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
-#
-# Dial-up settings
-# "lock" # Lock serial port
-# "115200" # Set the serial port baud rate
-# "modem crtscts" # Enable hardware flow control
-# "192.168.0.1:192.168.0.2" # Local and remote IP addresses
-#)
-#
-# Dial-up PPP users need to specify at least one telephone number
-#phone_number_ppp0=( "12345689" ) # Maximum 2 phone numbers are supported
-# They will also need a chat script - here's a good one
-#chat_ppp0=(
-# 'ABORT' 'BUSY'
-# 'ABORT' 'ERROR'
-# 'ABORT' 'NO ANSWER'
-# 'ABORT' 'NO CARRIER'
-# 'ABORT' 'NO DIALTONE'
-# 'ABORT' 'Invalid Login'
-# 'ABORT' 'Login incorrect'
-# 'TIMEOUT' '5'
-# '' 'ATZ'
-# 'OK' 'AT' # Put your modem initialization string here
-# 'OK' 'ATDT\T'
-# 'TIMEOUT' '60'
-# 'CONNECT' ''
-# 'TIMEOUT' '5'
-# '~--' ''
-#)
-
-# If the link require extra configuration - for example wireless or
-# RFC 268 bridge - we need to depend on the bridge so they get
-# configured correctly.
-#RC_NEED_ppp0="net.nas0"
-
-#WARNING: if MTU of the PPP interface is less than 1500 and you use this
-#machine as a router, you should add the following rule to your firewall
-#
-#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-#-----------------------------------------------------------------------------
-# ADSL
-# For ADSL support, emerge net-dialup/rp-pppoe
-# WARNING: This ADSL module is being deprecated in favour of the PPP module
-# above.
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ADSL
-#config_eth0=( "adsl" )
-
-# You probably won't need to edit /etc/ppp/pppoe.conf if you set this
-#adsl_user_eth0="my-adsl-username"
-
-#-----------------------------------------------------------------------------
-# ISDN
-# For ISDN support, emerge net-dialup/isdn4k-utils
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ISDN
-#config_ippp0=( "dhcp" )
-# It's important to specify dhcp if you need it!
-#config_ippp0=( "192.168.0.1/24" )
-# Otherwise, you can use a static IP
-
-# NOTE: The interface name must be either ippp or isdn followed by a number
-
-# You may need this option to set the default route
-#ipppd_eth0="defaultroute"
-
-#-----------------------------------------------------------------------------
-# MAC changer
-# To set a specific MAC address
-#mac_eth0="00:11:22:33:44:55"
-
-# For changing MAC addresses using the below, emerge net-analyzer/macchanger
-# - to randomize the last 3 bytes only
-#mac_eth0="random-ending"
-# - to randomize between the same physical type of connection (e.g. fibre,
-# copper, wireless) , all vendors
-#mac_eth0="random-samekind"
-# - to randomize between any physical type of connection (e.g. fibre, copper,
-# wireless) , all vendors
-#mac_eth0="random-anykind"
-# - full randomization - WARNING: some MAC addresses generated by this may NOT
-# act as expected
-#mac_eth0="random-full"
-# custom - passes all parameters directly to net-analyzer/macchanger
-#mac_eth0="some custom set of parameters"
-
-# You can also set other options based on the MAC address of your network card
-# Handy if you use different docking stations with laptops
-#config_001122334455=( "dhcp" )
-
-#-----------------------------------------------------------------------------
-# TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
-#
-# You must specify if we're a tun or tap device. Then you can give it any
-# name you like - such as vpn
-#tuntap_vpn="tun"
-#config_vpn=( "192.168.0.1/24")
-
-# Or stick wit the generic names - like tap0
-#tuntap_tap0="tap"
-#config_tap0=( "192.168.0.1/24")
-
-# For passing custom options to tunctl use something like the following. This
-# example sets the owner to adm
-#tunctl_tun1="-u adm"
-# When using openvpn, there are no options
-
-#-----------------------------------------------------------------------------
-# Bridging (802.1d)
-# For bridging support emerge net-misc/bridge-utils
-
-# To add ports to bridge br0
-#bridge_br0="eth0 eth1"
-# or dynamically add them when the interface comes up
-#bridge_add_eth0="br0"
-#bridge_add_eth1="br0"
-
-# You need to configure the ports to null values so dhcp does not get started
-#config_eth0=( "null" )
-#config_eth1=( "null" )
-
-# Finally give the bridge an address - dhcp or a static IP
-#config_br0=( "dhcp" ) # may not work when adding ports dynamically
-#config_br0=( "192.168.0.1/24" )
-
-# If any of the ports require extra configuration - for example wireless or
-# ppp devices - we need to depend on them like so.
-#RC_NEED_br0="net.eth0 net.eth1"
-
-# Below is an example of configuring the bridge
-# Consult "man brctl" for more details
-#brctl_br0=( "setfd 0" "sethello 0" "stp off" )
-
-#-----------------------------------------------------------------------------
-# RFC 2684 Bridge Support
-# For RFC 2684 bridge support emerge net-misc/br2684ctl
-
-# Interface names have to be of the form nas0, nas1, nas2, etc.
-# You have to specify a VPI and VCI for the interface like so
-#br2684ctl_nas0="-a 0.38" # UK VPI and VCI
-
-# You may want to configure the encapsulation method as well by adding the -e
-# option to the command above (may need to be before the -a command)
-# -e 0 # LLC (default)
-# -e 1 # VC mux
-
-# Then you can configure the interface as normal
-#config_nas0=( "192.168.0.1/24" )
-
-#-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
-# emerge sys-apps/iproute2
-#
-# For GRE tunnels
-#iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255"
-
-# For IPIP tunnels
-#iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255"
-
-# To configure the interface
-#config_vpn0=( "192.168.0.2 pointopoint 192.168.1.2" ) # ifconfig style
-#config_vpn0=( "192.168.0.2 peer 192.168.1.1" ) # iproute2 style
-
-# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
-# have a non-private address configured on an interface.
-# link_6to4="eth0" # Interface to base it's addresses on
-# config_6to4=( "ip6to4" )
-# You may want to depend on eth0 like so
-#RC_NEED_6to4="net.eth0"
-# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
-# any name and this also works for any configured interface.
-# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
-# sit0 - otherwise use a different name like 6to4 in the example above.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on ESSID. See wireless.example for more details
-
-# To use dns settings such as these, dns_servers_eth0 must be set!
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0=( "timeout 1" "rotate" )
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-#
-# netplug is a package that detects this and requires no extra configuration
-# on your part.
-# emerge sys-apps/netplug
-# or
-# emerge sys-apps/ifplugd
-# and you're done :)
-
-# By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
-# then you can specify a timeout here.
-#plug_timeout="10"
-# A value of 0 means wait forever.
-
-# If you don't want to use netplug on a specific interface but you have it
-# installed, you can disable it for that interface via the modules statement
-#modules_eth0=( "!netplug" )
-# You can do the same for ifplugd
-#
-# You can disable them both with the generic plug
-#modules_eth0=( "!plug" )
-
-# To use specific ifplugd options, fex specifying wireless mode
-#ifplugd_eth0="--api-mode=wlan"
-# man ifplugd for more options
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations. The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue. If preup returns a non-zero value, then
-# interface configuration will be aborted. If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-
-#preup() {
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the mii-diag
-# # package to be installed.
-# if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-# # Test for link on the interface prior to bringing it up. This
-# # only works on some network adapters and requires the ethtool
-# # package to be installed.
-# if ethtool "${IFACE}" | grep -q 'Link detected: no'; then
-# ewarn "No link on ${IFACE}, aborting configuration"
-# return 1
-# fi
-#
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#predown() {
-# # The default in the script is to test for NFS root and disallow
-# # downing interfaces in that case. Note that if you specify a
-# # predown() function you will override that logic. Here it is, in
-# # case you still want it...
-# if is_net_fs /; then
-# eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-# return 1
-# fi
-#
-# # Remember to return 0 on success
-# return 0
-#}
-
-#postup() {
-# # This function could be used, for example, to register with a
-# # dynamic DNS service. Another possibility would be to
-# # send/receive mail once the interface is brought up.
-
-# # Here is an example that allows the use of iproute rules
-# # which have been configured using the rules_eth0 variable.
-# #rules_eth0=(
-# # "from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100"
-# # "from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100"
-# #)
-# local x="rules_${IFVAR}[@]"
-# local -a rules=( "${!x}" )
-# if [[ -n ${rules} ]] ; then
-# einfo "Adding IP policy routing rules"
-# eindent
-# # Ensure that the kernel supports policy routing
-# if ! ip rule list | grep -q "^" ; then
-# eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-# eerror "in your kernel to use ip rules"
-# else
-# for x in "${rules[@]}" ; do
-# ebegin "${x}"
-# ip rule add ${x}
-# eend $?
-# done
-# fi
-# eoutdent
-# # Flush the cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-#}
-
-#postdown() {
-# # Enable Wake-On-LAN for every interface except for lo
-# # Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
-# # as well ;)
-# [[ ${IFACE} != "lo" ]] && ethtool -s "${IFACE}" wol g
-
-# Automatically erase any ip rules created in the example postup above
-# if interface_exists "${IFACE}" ; then
-# # Remove any rules for this interface
-# local rule
-# ip rule list | grep " iif ${IFACE}[ ]*" | {
-# while read rule ; do
-# rule="${rule#*:}"
-# ip rule del ${rule}
-# done
-# }
-# # Flush the route cache
-# ip route flush cache dev "${IFACE}"
-# fi
-
-# # Return 0 always
-# return 0
-#}
-
-#failup() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-#}
-
-##############################################################################
-# FORCING MODULES
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-#
-# Loading modules is a slow affair - we have to check each one for the following
-# 1) Code sanity
-# 2) Has the required package been emerged?
-# 3) Has it modified anything?
-# 4) Have all the dependant modules been loaded?
-
-# Then we have to strip out the conflicting modules based on user preference
-# and default configuration and sort them into the correct order.
-# Finally we check the end result for dependencies.
-
-# This, of course, takes valuable CPU time so we provide module forcing as a
-# means to speed things up. We still do *some* checking but not much.
-
-# It is essential that you force modules in the correct order and supply all
-# the modules you need. You must always supply an interface module - we
-# supply ifconfig or iproute2.
-
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-
-# Now that we've warned you twice, here's how to do it
-#modules_force=( "ifconfig" )
-#modules_force=( "iproute2" "dhcpcd" )
-
-# We can also apply this to a specific interface
-#modules_force_eth1=( "iproute2" )
-
-# The below will not work
-#modules_force=( "dhcpcd" )
-# No interface (ifconfig/iproute2)
-#modules_force=( "ifconfig" "essidnet" "iwconfig" )
-# Although it will not crash, essidnet will not work as it has to come after
-# iwconfig
-#modules_force=( "iproute2" "ifconfig" )
-# The interface will be setup twice which will cause problems
# Options to pass to the ntpd process
# Most people should leave this line alone ...
# however, if you know what you're doing, feel free to tweak
-NTPD_OPTS=""
+NTPD_OPTS="-u ntp:ntp"
+++ /dev/null
-# /etc/conf.d/portmap: config file for /etc/init.d/portmap
-
-# Options for `portmap`.
-# For a full list, just run `portmap -h`.
-#PORTMAP_OPTS="-l"
+++ /dev/null
-# /etc/init.d/pydoc.conf
-# $Header: /etc/conf.d/.rcs/pydoc-2.6,v 1.1 2010/11/30 20:43:53 root Exp $
-
-# This file contains the configuration information for pydoc's internal
-# webserver. The variables should be rather self explanatory :-)
-
-# Default port for Python's pydoc server
-PYDOC_PORT=7464
+++ /dev/null
-# /etc/conf.d/quota: config file for /etc/init.d/quota
-
-# Note: if your console is hooked up to a serial terminal,
-# you prob want to drop the '-v' from the OPTS vars below.
-
-
-# Run quotacheck ?
-RUN_QUOTACHECK="yes"
-
-
-# Options for quotacheck
-QUOTACHECK_OPTS="-avug"
-
-
-# Options for quotaon
-QUOTAON_OPTS="-avug"
-
-
-# Options for quotaoff
-QUOTAOFF_OPTS="-avug"
+++ /dev/null
-# /etc/conf.d/rc: Global config file for the Gentoo RC System
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-
-RC_TTY_NUMBER=12
-
-# Set to "yes" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. NOTE: When RC_PARALLEL_STARTUP
-# is enabled, init script output is replaced with simple "service foo
-# starting/stopping" messages so that output is not mixed up.
-# You can stop this from happening on the command line by passing --verbose
-# to the init script or by setting RC_VERBOSE="yes" below.
-
-RC_PARALLEL_STARTUP="no"
-
-# Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "no" to disable
-# this feature.
-
-RC_INTERACTIVE="yes"
-
-# Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no"
-# NOTE: This does not affect anything hotplug/udev related, just the
-# starting/stopping of the init.d service triggered by hotplug.
-
-RC_HOTPLUG="yes"
-
-# Dynamic /dev managers can trigger coldplug events which cause services to
-# start before we are ready for them. If this happens, we can defer these
-# services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*"
-
-RC_COLDPLUG="yes"
-
-# Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes
-# anyway.
-# Example - RC_PLUG_SERVICES="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-
-RC_PLUG_SERVICES=""
-
-# RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service.
-# The following values are allowed:
-# none - The 'net' service is always considered up.
-# no - This basically means that at least one net.* service besides net.lo
-# must be up. This can be used by notebook users that have a wifi and
-# a static nic, and only wants one up at any given time to have the
-# 'net' service seen as up.
-# lo - This is the same as the 'no' option, but net.lo is also counted.
-# This should be useful to people that do not care about any specific
-# interface being up at boot.
-# yes - For this ALL network interfaces MUST be up for the 'net' service to
-# be considered up.
-
-RC_NET_STRICT_CHECKING="no"
-
-# RC_DOWN_INTERFACE allows you to specify if RC will bring the interface
-# completely down when it stops. The default is yes, but there are some
-# instances where you may not want this to happen such as using Wake On LAN.
-
-RC_DOWN_INTERFACE="yes"
-
-# RC_VOLUME_ORDER allows you to specify, or even remove the volume setup
-# for various volume managers (MD, EVMS2, LVM, DM, etc). Note that they are
-# stopped in reverse order.
-
-RC_VOLUME_ORDER="raid evms lvm dm"
-
-# RC_VERBOSE will make init scripts more verbose. Only networking scripts
-# really use this at this time, and this is useful for trouble shooting
-# any issues you may have.
-# This is also used to re-enable init script output for init scripts
-# started or stopped from the command line.
-
-RC_VERBOSE="no"
-
-# RC_BOOTLOG will generate a log of the boot messages shown on the console.
-# Useful for headless machines or debugging. You need to emerge the
-# app-admin/showconsole package for this to work. Note that this probably
-# won't work correctly with boot splash.
-
-RC_BOOTLOG="no"
-
-# Set to "yes" if you want to benchmark system boot with bootchart.
-# You'll need to emerge the app-benchmarks/bootchart package for this to work.
-
-RC_BOOTCHART="no"
-
-# RC_USE_FSTAB allows you to override the default mount options for the
-# standard /proc, /sys, /dev, and /dev/pts mount points. Note that this
-# is the new way for selecting ramfs/tmpfs/etc... for udev mounting.
-
-RC_USE_FSTAB="no"
-
-# RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files
-# based on your runlevel - if a conf.d file for your profile does not exist
-# then we try and use the default one.
-# To enable runlevel selection at boot, append "softlevel=foobar" to your
-# kernel line to change to the foobar runlevel. Here we would search for
-# /etc/conf.d/<service>.foobar config files before trying to use the default
-# /etc/conf.d/<service>.
-# Note that it is only active if 'softlevel' was specified via the kernel line,
-# and it is intended to use for different grub/lilo entries to specify config
-# changes for say laptops between home and work, where you would have setup
-# 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as needed.
-
-RC_USE_CONFIG_PROFILE="yes"
-
-# RC_FORCE_AUTO tries its best to prevent user interaction during the boot and
-# shutdown process. For example, fsck will automatically be run or volumes
-# remounted to create proper directory trees. This feature can be dangerous
-# and is meant ONLY for headless machines where getting a physical console
-# hooked up is a huge pita.
-
-RC_FORCE_AUTO="no"
-
-# Use this variable to control the /dev management behavior.
-# auto - let the scripts figure out what's best at boot
-# devfs - use devfs (requires sys-fs/devfsd)
-# udev - use udev (requires sys-fs/udev)
-# static - let the user manage /dev (YOU need to create ALL device nodes)
-
-RC_DEVICES="auto"
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup. This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-
-RC_DEVICE_TARBALL="no"
-
-# RC_DMESG_LEVEL sets the level at which logging of messages is done to the
-# console. See dmesg(8) for more info.
-
-RC_DMESG_LEVEL="1"
-
-
-
-
-
-#
-# Controlling start-stop-daemon behavior
-
-# Set to "yes" if start-stop-daemon should always retry killing the
-# service with sig KILL if it fails the first time.
-
-RC_RETRY_KILL="yes"
-
-
-# Set the amount of seconds start-stop-daemon should wait between
-# retries.
-
-RC_RETRY_TIMEOUT=1
-
-
-# Set the amount of times start-stop-daemon should try to kill
-# a service before giving up.
-
-RC_RETRY_COUNT=5
-
-
-# Set to "yes" if start-stop-daemon should fail if the service
-# is marked as started, but not actually running on stop.
-
-RC_FAIL_ON_ZOMBIE="no"
-
-
-# Set to "yes" if start-stop-daemon should attempt to kill
-# any children left in the system.
-# Be careful with this as it really does what it was on the tin.
-# fex, if you're in an ssh process and you restart a service on which ssh
-# depends then your terminal will be killed also.
-
-RC_KILL_CHILDREN="no"
-
-
-# Set the amount of seconds start-stop-daemon waits after starting
-# the daemon to check it is still running. If it's not then we
-# try and stop any children if possible.
-RC_WAIT_ON_START="0.1"
-
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can launch them through other daemons here, for example valgrind.
-# This is only useful for serious debugging of the daemon
-# WARNING: If the script's "stop" function does not supply a PID file then
-# all processes using the same daemon will be killed.
-#RC_DAEMON="/usr/bin/valgrind --tool=memcheck --log-file=/tmp/valgrind.syslog-ng"
-
-# strace needs to be prefixed with --background as it does not detach when
-# it's following
-#RC_DAEMON="--background /usr/sbin/strace -f -o /tmp/strace.syslog-ng"
-
-# Pass ulimit parameters
-#RC_ULIMIT="-u 30"
-
-##############################################################################
-
-
-#
-# Internal configuration variables
-#
-# NB: These are for advanced users, and you should really
-# know what you are doing before changing them!
-#
-
-# rc-scripts dep-cache directory
-#
-# NOTE: Do not remove the next line, as its needed by the baselayout ebuild!
-#
-# svcdir="/var/lib/init.d"
-
-svcdir="/var/lib/init.d"
-
-# Should we mount $svcdir in a ram disk for some speed increase
-# for slower machines, or for the more extreme setups ?
-
-svcmount="no"
-
-# FS type that should be used for $svcdir. Note that you need
-# $svcmount above set to "yes" for this to work ... Currently
-# tmpfs, ramfs, and ramdisk are supported (tmpfs is the default).
-
-svcfstype="tmpfs"
-
-# Size of $svcdir in KB. Note that ramfs doesn't support this
-# due to kernel limitations.
-
-svcsize=2048
-# $Header: /etc/conf.d/.rcs/saslauthd,v 1.1 2010/12/01 06:52:36 root Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/cyrus-sasl/files/saslauthd-2.1.21.conf,v 1.2 2007/04/07 13:03:55 chtekk Exp $
# Config file for /etc/init.d/saslauthd
+++ /dev/null
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-# This file is obsolete.
-
-# /etc/conf.d/wireless:
-# Global wireless config file for net.* rc-scripts
-
-#
-# Usage of /etc/conf.d/wireless is deprecated ... make sure you
-# put all settings in /etc/conf.d/net
-#
-
-
-##############################################################################
-# IMPORTANT
-# linux-wlan-ng is not supported as they have their own configuration program
-# ensure that /etc/conf.d/net has the entry "!iwconfig" in it's modules line
-# Try and use an alternative driver if you need to use this - hostap-driver
-# supports non-usb linux-wlan-ng driven devices
-##############################################################################
-
-##############################################################################
-# HINTS
-##############################################################################
-# Remember to change eth0 to your wireless interface which may be
-# eth0, eth1, wlan0, ath0 - you get the idea. If you're not sure
-# you can type "iwconfig" at the command prompt and it will tell you which
-# interfaces are wireless.
-# Say that your wireless interface is ath0 - the line
-# #essid_eth0="any"
-# becomes
-# #essid_ath0="any"
-#
-# Remember to change ESSID to your ESSID.
-# Say that your ESSID is My NET - the line
-# #key_ESSID="s:passkey"
-# becomes
-# #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (english alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any ESSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your ESSID is
-# My "\ NET
-# it becomes
-# My \"\\ NET
-# for example
-# #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-# #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#
-# As a final note, most users will just need to set the following options
-# key_ESSID1="s:yourkeyhere enc open" # s: means a text key
-# key_ESSID2="aaaa-bbbb-cccc-dd" # no s: means a hex key
-# preferred_aps=( "ESSID1" "ESSID2" )
-#
-# Clear? Good. Now configure your wireless network below
-#########################################################
-
-##############################################################################
-# SETTINGS
-##############################################################################
-# Hard code an ESSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# Set to "any" to connect to any ESSID - the driver picks an Access Point
-# This needs to be done when the driver doesn't support scanning
-# This may work for drivers that don't support scanning but you need automatic
-# AP association
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-
-# However, using ad-hoc (without scanning for APs) and master mode
-# do require the ESSID to be set - do this here
-#essid_eth0="any"
-
-# Set the mode of the interface (managed, ad-hoc, master or auto)
-# The default is auto
-# If it's ad-hoc or master you also may need to specify the channel below
-#mode_eth0="auto"
-
-# If managed mode fails, drop to ad-hoc mode with the below ESSID?
-#adhoc_essid_eth0="WLAN"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the iwconfig argument
-# without the iwconfig $iface.
-#iwconfig_eth0=""
-
-# Set private driver ioctls. This is basically the iwpriv argument without
-# the iwpriv $iface. If you use the rt2500 driver (not the rt2x00 one) then
-# you can set WPA here, below is an example.
-#iwpriv_eth0=""
-#iwpriv_ESSID=(
-# "set AuthMode=WPAPSK"
-# "set EncrypType=TKIP"
-# "set WPAPSK=yourpasskey"
-#)
-#NOTE: Even though you can use WPA like so, you may have to set a WEP key
-#if your driver claims the AP is encrypted. The WEP key itself will not be
-#used though.
-
-# Seconds to wait before scanning
-# Some drivers need to wait until they have finished "loading"
-# before they can scan - otherwise they error and claim that they cannot scan
-# or resource is unavailable. The default is to wait zero seconds
-#sleep_scan_eth0="1"
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# By default a successful association in Managed mode sets the MAC
-# address of the AP connected to. However, some drivers (namely
-# the ipw2100) don't set an invalid MAC address when association
-# fails - so we need to check on link quality which some drivers
-# don't report properly either.
-# So if you have connection problems try flipping this setting
-# Valid options are MAC, quality and all - defaults to MAC
-#associate_test_eth0="MAC"
-
-# Some driver/card combinations need to scan in Ad-Hoc mode
-# After scanning, the mode is reset to the one defined above
-#scan_mode_eth0="Ad-Hoc"
-
-# Below you can define private ioctls to run before and after scanning
-# Format is the same as the iwpriv_eth0 above
-# This is needed for the HostAP drivers
-#iwpriv_scan_pre_eth0="host_roaming 2"
-#iwpriv_scan_post_eth0="host_roaming 0"
-
-# Define a WEP key per ESSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point
-# You can't use "any" for an ESSID here
-#key_ESSID="1234-1234-1234-1234-1234-1234-56"
-# or you can use strings. Passphrase IS NOT supported
-# To use a string, prefix it with s:
-# Note - this example also sets the encryption method to open
-# which is regarded as more secure than restricted
-#key_ESSID="s:foobar enc open"
-#key_ESSID="s:foobar enc restricted"
-
-# If you have whitespace in your key, here's how to set it and use other
-# commands like using open encryption.
-#key_ESSID="s:'foo bar' enc open"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="s:foobar"
-
-# Here are some more examples of keys as some users find others work
-# and some don't where they should all do the same thing
-#key_ESSID="open s:foobar"
-#key_ESSID="open 1234-5678-9012"
-#key_ESSID="s:foobar enc open"
-#key_ESSID="1234-5678-9012 enc open"
-
-# You may want to set multiple keys - here's an example
-# It sets 4 keys on the card and instructs to use key 2 by default
-#key_ESSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per ESSID - which is very handy if you use different networks a lot
-#config_ESSID=( "dhcp" )
-#dhcpcd_ESSID="-t 5"
-#routes_ESSID=()
-#fallback_ESSID=()
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" )
-#dns_domain_ESSID="some.domain"
-#dns_search_path_ESSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# in case you use Access Points with the same ESSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455=( "dhcp" )
-#dhcpcd_001122334455="-t 10"
-#dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
-
-# Map a MAC address to an ESSID
-# This is used when the Access Point is not broadcasting it's ESSID
-# WARNING: This will override the ESSID being broadcast due to some
-# Access Points sending an ESSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and ESSID to the ESSID
-# it should map to
-#mac_essid_001122334455="ESSID"
-
-# This lists the preferred ESSIDs to connect to in order
-# ESSID's can contain any characters here as they must match the broadcast
-# ESSID exactly.
-# Surround each ESSID with the " character and separate them with a space
-# If the first ESSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps=( "ESSID 1" "ESSID 2" )
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0=( "ESSID 3" "ESSID 4" )
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly" and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then any
-# other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forcibly connect to APs in order if it does not find
-# them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
-# to scan
-# "forceany" does the same as forcepreferred + connects to any other available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps=( "ESSID 1" "ESSID 2" )
-#blacklist_aps_eth0=( "ESSID 3" ESSID 4" )
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps list ignores blacklisted_aps - so if you have
-# the same ESSID in both, well, you're a bit silly :p
-
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Two functions can be defined which will be called surrounding the
-# associate function. The functions are called with the interface
-# name first so that one function can control multiple adapters.
-#
-# The return values for the preassociate function should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue. If preassociate returns a non-zero value, then
-# interface configuration will be aborted.
-#
-# The return value for the postassociate function is ignored
-# since there's nothing to do if it indicates failure.
-
-#preassociate() {
-# # The below adds two configuration variables leap_user_ESSID
-# # and leap_pass_ESSID. When they are both configured for the ESSID
-# # being connected to then we run the CISCO LEAP script
-#
-# local user pass
-# eval user=\"\$\{leap_user_${ESSIDVAR}\}\"
-# eval pass=\"\$\{leap_pass_${ESSIDVAR}\}\"
-#
-# if [[ -n ${user} && -n ${pass} ]]; then
-# if [[ ! -x /opt/cisco/bin/leapscript ]]; then
-# eend "For LEAP support, please emerge net-misc/cisco-aironet-client-utils"
-# return 1
-# fi
-# einfo "Waiting for LEAP Authentication on \"${ESSID//\\\\//}\""
-# if /opt/cisco/bin/leapscript ${user} ${pass} | grep -q 'Login incorrect'; then
-# ewarn "Login Failed for ${user}"
-# return 1
-# fi
-# fi
-#
-# return 0
-#}
-
-#postassociate() {
-# # This function is mostly here for completeness... I haven't
-# # thought of anything nifty to do with it yet ;-)
-# # Return 0 always
-# return 0
-#}
--- /dev/null
+# /etc/bash/bashrc
+#
+# This file is sourced by all *interactive* bash shells on startup,
+# including some apparently interactive shells such as scp and rcp
+# that can't tolerate any output. So make sure this doesn't display
+# anything or bad things will happen !
+
+
+if [ -d /usr/scripts ] ; then
+ PATH=/usr/scripts:$PATH
+ export PATH
+fi
+
+if [ -d $HOME/bin ] ; then
+ PATH=$PATH:$HOME/bin
+ export PATH
+fi
+
+if [ -d $HOME/lib ] ; then
+ PERL5LIB=$HOME/lib
+ export PERL5LIB
+fi
+
+# Test for an interactive shell. There is no need to set anything
+# past this point for scp and rcp, and it's important to refrain from
+# outputting anything in those cases.
+if [[ $- != *i* ]] ; then
+ # Shell is non-interactive. Be done now!
+ return
+fi
+
+# Bash won't get SIGWINCH if another process is in the foreground.
+# Enable checkwinsize so that bash will check the terminal size when
+# it regains control. #65623
+# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
+shopt -s checkwinsize
+
+# Enable history appending instead of overwriting. #139609
+shopt -s histappend
+
+# Change the window title of X terminals
+case ${TERM} in
+ xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
+ ;;
+ screen)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
+ ;;
+esac
+
+use_color=false
+
+# Set colorful PS1 only on colorful terminals.
+# dircolors --print-database uses its own built-in database
+# instead of using /etc/DIR_COLORS. Try to use the external file
+# first to take advantage of user additions. Use internal bash
+# globbing instead of external grep binary.
+safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
+match_lhs=""
+[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
+[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
+[[ -z ${match_lhs} ]] \
+ && type -P dircolors >/dev/null \
+ && match_lhs=$(dircolors --print-database)
+[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
+
+if ${use_color} ; then
+ # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
+ if type -P dircolors >/dev/null ; then
+ if [[ -f ~/.dir_colors ]] ; then
+ eval $(dircolors -b ~/.dir_colors)
+ elif [[ -f /etc/DIR_COLORS ]] ; then
+ eval $(dircolors -b /etc/DIR_COLORS)
+ fi
+ fi
+
+ if [[ ${EUID} == 0 ]] ; then
+ #PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
+ PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]'
+ #PS1='$? \[\033[01;31m\]Gentoo (chroot)\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]'
+ else
+ #PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
+ PS1='$? \[\033[01;32m\]\u@\h\[\033[01;30m\]:\[\033[01;34m\]\w > \[\033[00m\]'
+ fi
+
+ alias ls='ls --color=auto'
+ alias grep='grep --colour=auto'
+else
+ if [[ ${EUID} == 0 ]] ; then
+ # show root@ when we don't have colors
+ PS1='\u@\h \W \$ '
+ else
+ PS1='\u@\h \w \$ '
+ fi
+fi
+
+if [[ ${EUID} == 0 ]] ; then
+ alias ll="ls -lA"
+else
+ alias ll="ls -l"
+fi
+alias la="ls -la"
+alias md=mkdir
+alias rd=rmdir
+alias ..='cd ..'
+alias ...='cd ../..'
+alias cd..='cd ..'
+alias cd...='cd ../..'
+alias pl="ps -fu $USER"
+grep='grep --colour=auto'
+alias cpwd='cd `realpath .`'
+
+lcd() {
+ cd $( perl -e '
+use strict;
+use Cwd;
+my $new = shift;
+my $cwd = Cwd::abs_path(getcwd());
+my $newa = $cwd;
+if ($new){
+ $newa = Cwd::abs_path($new);
+ $newa = $cwd unless $newa;
+};
+printf("%s\n", $newa);
+' $1 )
+}
+
+
+HISTCONTROL=ignoreboth
+HISTSIZE=5000
+HISTFILESIZE=5000
+HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S '
+
+export LESSCOLOR=yes
+
+# Change the window title of X terminals
+case $TERM in
+ xterm*|rxvt|Eterm|eterm)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
+ ;;
+ screen)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
+ ;;
+esac
+
+if [ -f /usr/share/mc/mc.gentoo ]; then
+ . /usr/share/mc/mc.gentoo
+fi
+
+if [ -f /etc/profile.d/bash-completion ]; then
+ . /etc/profile.d/bash-completion
+fi
+
+
+
+# Try to keep environment pollution down, EPA loves us.
+unset use_color safe_term match_lhs
--- /dev/null
+# /etc/bash/bashrc
+#
+# This file is sourced by all *interactive* bash shells on startup,
+# including some apparently interactive shells such as scp and rcp
+# that can't tolerate any output. So make sure this doesn't display
+# anything or bad things will happen !
+
+
+# Test for an interactive shell. There is no need to set anything
+# past this point for scp and rcp, and it's important to refrain from
+# outputting anything in those cases.
+if [[ $- != *i* ]] ; then
+ # Shell is non-interactive. Be done now!
+ return
+fi
+
+# Bash won't get SIGWINCH if another process is in the foreground.
+# Enable checkwinsize so that bash will check the terminal size when
+# it regains control. #65623
+# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
+shopt -s checkwinsize
+
+# Enable history appending instead of overwriting. #139609
+shopt -s histappend
+
+# Change the window title of X terminals
+case ${TERM} in
+ xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
+ PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"'
+ ;;
+ screen)
+ PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"'
+ ;;
+esac
+
+use_color=false
+
+# Set colorful PS1 only on colorful terminals.
+# dircolors --print-database uses its own built-in database
+# instead of using /etc/DIR_COLORS. Try to use the external file
+# first to take advantage of user additions. Use internal bash
+# globbing instead of external grep binary.
+safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
+match_lhs=""
+[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
+[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
+[[ -z ${match_lhs} ]] \
+ && type -P dircolors >/dev/null \
+ && match_lhs=$(dircolors --print-database)
+[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
+
+if ${use_color} ; then
+ # Enable colors for ls, etc. Prefer ~/.dir_colors #64489
+ if type -P dircolors >/dev/null ; then
+ if [[ -f ~/.dir_colors ]] ; then
+ eval $(dircolors -b ~/.dir_colors)
+ elif [[ -f /etc/DIR_COLORS ]] ; then
+ eval $(dircolors -b /etc/DIR_COLORS)
+ fi
+ fi
+
+ if [[ ${EUID} == 0 ]] ; then
+ PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
+ else
+ PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
+ fi
+
+ alias ls='ls --color=auto'
+ alias grep='grep --colour=auto'
+else
+ if [[ ${EUID} == 0 ]] ; then
+ # show root@ when we don't have colors
+ PS1='\u@\h \W \$ '
+ else
+ PS1='\u@\h \w \$ '
+ fi
+fi
+
+# Try to keep environment pollution down, EPA loves us.
+unset use_color safe_term match_lhs
--- /dev/null
+/* $Id: bind.keys,v 1.7 2011-01-03 23:45:07 each Exp $ */
+# The bind.keys file is used to override the built-in DNSSEC trust anchors
+# which are included as part of BIND 9. As of the current release, the only
+# trust anchors it contains are those for the DNS root zone ("."), and for
+# the ISC DNSSEC Lookaside Validation zone ("dlv.isc.org"). Trust anchors
+# for any other zones MUST be configured elsewhere; if they are configured
+# here, they will not be recognized or used by named.
+#
+# The built-in trust anchors are provided for convenience of configuration.
+# They are not activated within named.conf unless specifically switched on.
+# To use the built-in root key, set "dnssec-validation auto;" in
+# named.conf options. To use the built-in DLV key, set
+# "dnssec-lookaside auto;". Without these options being set,
+# the keys in this file are ignored.
+#
+# This file is NOT expected to be user-configured.
+#
+# These keys are current as of January 2011. If any key fails to
+# initialize correctly, it may have expired. In that event you should
+# replace this file with a current version. The latest version of
+# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.
+
+managed-keys {
+ # ISC DLV: See https://www.isc.org/solutions/dlv for details.
+ # NOTE: This key is activated by setting "dnssec-lookaside auto;"
+ # in named.conf.
+ dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
+ brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
+ ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
+ Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
+ QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt
+ TDN0YUuWrBNh";
+
+ # ROOT KEY: See https://data.iana.org/root-anchors/root-anchors.xml
+ # for current trust anchor information.
+ # NOTE: This key is activated by setting "dnssec-validation auto;"
+ # in named.conf.
+ . initial-key 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
+ FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
+ bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
+ X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
+ W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
+ Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
+ QxA+Uk1ihz0=";
+};
+# vim: ts=4 filetype=named noai
--- /dev/null
+/* $Id: bind.keys,v 1.7 2011/01/03 23:45:07 each Exp $ */
+# The bind.keys file is used to override the built-in DNSSEC trust anchors
+# which are included as part of BIND 9. As of the current release, the only
+# trust anchors it contains are those for the DNS root zone ("."), and for
+# the ISC DNSSEC Lookaside Validation zone ("dlv.isc.org"). Trust anchors
+# for any other zones MUST be configured elsewhere; if they are configured
+# here, they will not be recognized or used by named.
+#
+# The built-in trust anchors are provided for convenience of configuration.
+# They are not activated within named.conf unless specifically switched on.
+# To use the built-in root key, set "dnssec-validation auto;" in
+# named.conf options. To use the built-in DLV key, set
+# "dnssec-lookaside auto;". Without these options being set,
+# the keys in this file are ignored.
+#
+# This file is NOT expected to be user-configured.
+#
+# These keys are current as of January 2011. If any key fails to
+# initialize correctly, it may have expired. In that event you should
+# replace this file with a current version. The latest version of
+# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.
+
+managed-keys {
+ # ISC DLV: See https://www.isc.org/solutions/dlv for details.
+ # NOTE: This key is activated by setting "dnssec-lookaside auto;"
+ # in named.conf.
+ dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
+ brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
+ ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
+ Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
+ QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt
+ TDN0YUuWrBNh";
+
+ # ROOT KEY: See https://data.iana.org/root-anchors/root-anchors.xml
+ # for current trust anchor information.
+ # NOTE: This key is activated by setting "dnssec-validation auto;"
+ # in named.conf.
+ . initial-key 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
+ FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
+ bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
+ X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
+ W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
+ Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
+ QxA+Uk1ihz0=";
+};
--- /dev/null
+//###############################################################
+//# Bind9-Konfigurationsdatei
+//# /etc/bind/named.conf
+//#
+//# Host Helga
+//#
+//# Generiert am: 26.05.2010
+//# von: frank@brehm-online.com
+//#
+//###############################################################
+
+
+
+//###############################################################
+//# Allgemeine Optionen
+
+options {
+ directory "/var/bind";
+
+ // uncomment the following lines to turn on DNS forwarding,
+ // and change the forwarding ip address(es) :
+ //forward first;
+ //forwarders {
+ // 123.123.123.123;
+ // 123.123.123.123;
+ //};
+
+ # Auf allen Ports lauschen ...
+ listen-on-v6 {
+ any;
+ };
+ listen-on {
+ any;
+ };
+
+ // to allow only specific hosts to use the DNS server:
+ //allow-query {
+ // 127.0.0.1;
+ //};
+
+ allow-notify {
+ 85.214.147.150;
+ 85.214.134.152;
+ 46.16.73.175;
+ 127.0.0.1/8;
+ ::1;
+ 2a01:238:4225:6e00:8f8c:808a:7fb8:88df;
+ 2a01:238:4239:8a00:d4da:215d:3d01:f9b9;
+ };
+
+ // if you have problems and are behind a firewall:
+ //query-source address * port 53;
+ pid-file "/var/run/named/named.pid";
+
+ version "none";
+
+};
+
+// Logging
+include "/etc/bind/named-log.conf";
+
+// Managed Keys
+include "/etc/bind/bind.keys";
+
+//###############################################################
+//# Kontrollkanäle für RNDC
+
+controls {
+ inet 127.0.0.1 port 953 allow {
+ 127.0.0.1;
+ } keys {
+ "rndc-key";
+ };
+};
+
+//###############################################################
+//# Id-Schlüssel
+
+key rndc-key {
+ algorithm hmac-md5;
+ secret "qVWegky7GAFenNmgrZgf6A==";
+};
+
+key DYN_DNS_UPDATER {
+ algorithm hmac-md5;
+ secret "gi69Yjzo1OSPVQ/oTTgw+Q==";
+};
+
+// Access-Control-Listen
+include "/etc/bind/named-acl.conf";
+
+// Briefly, a zone which has been declared delegation-only will be effectively
+// limited to containing NS RRs for subdomains, but no actual data beyond its
+// own apex (for example, its SOA RR and apex NS RRset). This can be used to
+// filter out "wildcard" or "synthesized" data from NAT boxes or from
+// authoritative name servers whose undelegated (in-zone) data is of no
+// interest.
+// See http://www.isc.org/products/BIND/delegation-only.html for more info
+
+//zone "COM" { type delegation-only; };
+//zone "NET" { type delegation-only; };
+
+//###############################################################
+//# Hint-Zonen (zum Finden der Root-Server)
+
+zone "." IN {
+ type hint;
+ file "named.cache";
+};
+
+zone "localhost" IN {
+ type master;
+ file "pri/localhost.zone";
+ allow-update { none; };
+ notify no;
+};
+
+zone "127.in-addr.arpa" IN {
+ type master;
+ file "pri/127.zone";
+ allow-update { none; };
+ notify no;
+};
+
+//###############################################################
+// Include der Zonendefinitionen
+
+// Master-Zonen
+include "/etc/bind/named-pri.conf";
+
+// Dynamische Zonen
+include "/etc/bind/named-dyn.conf";
+
+// Slave-Zonen
+include "/etc/bind/named-sec.conf";
+
+
+
+# vim: ts=4 filetype=named noai
--- /dev/null
+# conf.d file for git-daemon
+#
+# Please check man 1 git-daemon for more information about the options
+# git-daemon accepts. You MUST edit this to include your repositories you wish
+# to serve.
+#
+# Some of the meaningful options are:
+# --syslog --- Enables syslog logging
+# --verbose --- Enables verbose logging
+# --export-all --- Exports all repositories
+# --port=XXXX --- Starts in port XXXX instead of 9418
+#
+#GITDAEMON_OPTS="--syslog /var/git"
+GITDAEMON_OPTS="--syslog --verbose --base-path=/var/lib/git /var/lib/git"
+
+# To run an anonymous git safely, the following user should be able to only
+# read your Git repositories. It should not able able to write to anywhere on
+# your system, esp. not the repositories.
+GIT_USER="nobody"
+GIT_GROUP="nobody"
--- /dev/null
+# conf.d file for git-daemon
+#
+# Please check man 1 git-daemon for more information about the options
+# git-daemon accepts. You MUST edit this to include your repositories you wish
+# to serve.
+#
+# Some of the meaningful options are:
+# --syslog --- Enables syslog logging
+# --verbose --- Enables verbose logging
+# --export-all --- Exports all repositories
+# --port=XXXX --- Starts in port XXXX instead of 9418
+#
+GITDAEMON_OPTS="--syslog /var/git"
+
+# To run an anonymous git safely, the following user should be able to only
+# read your Git repositories. It should not able able to write to anywhere on
+# your system, esp. not the repositories.
+GIT_USER="nobody"
+GIT_GROUP="nobody"
--- /dev/null
+# /etc/hosts: Local Host Database
+#
+# This file describes a number of aliases-to-address mappings for the for
+# local hosts that share this file.
+#
+# In the presence of the domain name service or NIS, this file may not be
+# consulted at all; see /etc/host.conf for the resolution order.
+#
+
+# IPv4 and IPv6 localhost aliases
+127.0.0.1 localhost
+::1 localhost
+
+85.214.134.152 helga.brehm-online.com helga h1763652.stratoserver.net h1763652
+2a01:238:4225:6e00:8f8c:808a:7fb8:88df helga.brehm-online.com helga h1763652.stratoserver.net h1763652
+
+2001:6f8:1c00:365::2 home.brehm-online.com
+
+#
+# Imaginary network.
+#10.0.0.2 myname
+#10.0.0.3 myfriend
+#
+# According to RFC 1918, you can use the following IP networks for private
+# nets which will never be connected to the Internet:
+#
+# 10.0.0.0 - 10.255.255.255
+# 172.16.0.0 - 172.31.255.255
+# 192.168.0.0 - 192.168.255.255
+#
+# In case you want to be able to connect directly to the Internet (i.e. not
+# behind a NAT, ADSL router, etc...), you need real official assigned
+# numbers. Do not try to invent your own network numbers but instead get one
+# from your network provider (if any) or from your regional registry (ARIN,
+# APNIC, LACNIC, RIPE NCC, or AfriNIC.)
+#
--- /dev/null
+# Apache2 logrotate snipet for Gentoo Linux
+# Contributes by Chuck Short
+#
+#/var/log/apache2/*log {
+# missingok
+# notifempty
+# sharedscripts
+# postrotate
+# /etc/init.d/apache2 reload > /dev/null 2>&1 || true
+# endscript
+#}
+
+script apache2-reload
+ /etc/init.d/apache2 reload >/dev/null || true
+endscript
+
+#rotate 10
+daily
+
+/var/log/apache2/*log {
+ size 4m
+ olddir /var/log/apache2/%Y-%m
+ postrotate apache2-reload
+}
+
+# vim: ts=4 filetype=conf
--- /dev/null
+# vim: noai: filetype=pfmain ts=4 sw=4
+
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = //usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.9/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
+home_mailbox = .maildir/
+#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
+alias_maps = hash:/etc/postfix/maps/aliases
+anvil_status_update_time = 3600s
+body_checks = pcre:/etc/postfix/maps/body_checks
+bounce_template_file = /etc/postfix/bounce-templates/bounce.de-DE.cf
+broken_sasl_auth_clients = yes
+#canonical_maps = mysql:/etc/postfix/mysql-canonical.cf
+canonical_maps = hash:/etc/postfix/maps/canonical
+cyrus_sasl_config_path = /etc/sasl2
+default_destination_concurrency_limit = 5
+header_checks = pcre:/etc/postfix/maps/header_checks
+inet_protocols = all
+local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname
+mail_spool_directory = /var/spool/mail
+mailbox_size_limit = 512000000
+message_size_limit = 51200000
+#mydestination = $myhostname, $mydomain, mysql:/etc/postfix/mysql-mydomains.cf
+mydestination = $myhostname, $mydomain, hash:/etc/postfix/maps/mydomains
+mydomain = brehm-online.com
+myhostname = helga.brehm-online.com
+mynetworks = 127.0.0.0/8 85.214.134.152/32 85.214.109.1/32 [::1]/128 [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]/128
+mynetworks_style = host
+myorigin = $mydomain
+#recipient_bcc_maps = mysql:/etc/postfix/mysql-recipient_bcc.cf
+recipient_bcc_maps = hash:/etc/postfix/maps/recipient_bcc
+#relay_clientcerts = hash:/etc/postfix/relay_clientcerts
+relay_clientcerts = hash:/etc/postfix/maps/relay_clientcerts
+#relay_domains = mysql:/etc/postfix/mysql-relay-domains.cf
+relay_domains = hash:/etc/postfix/maps/relay_domains
+#relocated_maps = mysql:/etc/postfix/mysql-relocated.cf
+relocated_maps = hash:/etc/postfix/maps/relocated
+#sender_bcc_maps = mysql:/etc/postfix/mysql-sender_bcc.cf
+sender_bcc_maps = hash:/etc/postfix/maps/sender_bcc
+smtp_generic_maps = hash:/etc/postfix/maps/generic
+smtp_tls_CAfile = /etc/ssl/CA-Brehm/cacert.pem
+smtp_tls_cert_file = /etc/postfix/postfix.pem
+smtp_tls_enforce_peername = no
+smtp_use_tls = yes
+smtpd_banner = $myhostname ESMTP Frank Brehms Mail Service $mail_name ($mail_version)
+
+smtpd_recipient_restrictions =
+ check_client_access cidr:/etc/postfix/maps/access_client,
+ check_recipient_access hash:/etc/postfix/maps/access_recipient,
+ check_helo_access hash:/etc/postfix/maps/access_helo,
+ check_sender_access hash:/etc/postfix/maps/access_sender,
+ reject_non_fqdn_recipient,
+ reject_unknown_recipient_domain,
+ reject_non_fqdn_sender,
+ reject_unknown_sender_domain,
+ reject_invalid_helo_hostname,
+ permit_mynetworks,
+ permit_sasl_authenticated,
+ permit_tls_clientcerts,
+ reject_rbl_client zen.spamhaus.org,
+ reject_rbl_client ix.dnsbl.manitu.net,
+ check_policy_service unix:private/postgrey,
+ check_policy_service inet:127.0.0.1:12525,
+ reject_unverified_recipient,
+ permit_mx_backup,
+ reject_unauth_destination,
+ permit
+
+smtpd_sasl_auth_enable = yes
+smtpd_tls_CAfile = $smtp_tls_CAfile
+smtpd_tls_cert_file = $smtp_tls_cert_file
+smtpd_tls_key_file = $smtp_tls_cert_file
+smtpd_tls_loglevel = 1
+smtpd_tls_received_header = yes
+smtpd_use_tls = yes
+transport_maps = hash:/etc/postfix/maps/transport
+#virtual_alias_domains = mysql:/etc/postfix/mysql-virtual-alias-domains.cf
+virtual_alias_domains = hash:/etc/postfix/maps/virtual_alias_domains
+#virtual_alias_maps = mysql:/etc/postfix/mysql-virtual.cf
+virtual_alias_maps = hash:/etc/postfix/maps/virtual_alias_maps
+virtual_gid_maps = static:1023
+virtual_mailbox_base = /
+#virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
+virtual_mailbox_domains = hash:/etc/postfix/maps/virtual_mailbox_domains
+virtual_mailbox_limit = 512000000
+#virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-maps.cf
+virtual_mailbox_maps = hash:/etc/postfix/maps/virtual_mailbox_maps
+virtual_uid_maps = static:1023
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.9/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
+home_mailbox = .maildir/
--- /dev/null
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd
+ -o content_filter=
+ -o smtpd_proxy_filter=localhost:10024
+#smtp inet n - n - 1 postscreen
+#smtpd pass - - n - - smtpd
+#dnsblog unix - - n - 0 dnsblog
+#tlsproxy unix - - n - 0 tlsproxy
+#submission inet n - n - - smtpd
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#smtps inet n - n - - smtpd
+# -o smtpd_tls_wrappermode=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+smtps inet n - n - - smtpd
+ -o smtpd_tls_wrappermode=yes
+ -o smtpd_sasl_auth_enable=yes
+ -o content_filter=
+ -o smtpd_proxy_filter=localhost:10024
+localhost:10025 inet n - n - - smtpd
+ -o content_filter=
+ -o smtpd_proxy_filter=
+ -o smtpd_authorized_xforward_hosts=127.0.0.0/8
+ -o smtpd_client_restictions=
+ -o smtpd_helo_restictions=
+ -o smtpd_sender_restrictions=
+ -o smtpd_recipient_restrictions=permit_mynetworks,reject
+ -o smtpd_data_restrictions=
+ -o mynetworks=127.0.0.0/8
+ -o receive_override_options=no_unknown_recipient_checks
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+# -o content_filter=smtp:[localhost]:10024
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o smtp_fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
+#
+# Greylisting
+# ====================================================================
+policy unix - n n - - spawn
+ user=nobody argv=/usr/bin/perl -T /etc/postfix/greylist/greylist.pl
--- /dev/null
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd
+#smtp inet n - n - 1 postscreen
+#smtpd pass - - n - - smtpd
+#dnsblog unix - - n - 0 dnsblog
+#tlsproxy unix - - n - 0 tlsproxy
+#submission inet n - n - - smtpd
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#smtps inet n - n - - smtpd
+# -o smtpd_tls_wrappermode=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o smtp_fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
--- /dev/null
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.3 2011/05/09 12:36:20 eras Exp $
+pwcheck_method:saslauthd
+mech_list: PLAIN LOGIN
+log_level: 3
--- /dev/null
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.3 2011/05/09 12:36:20 eras Exp $
+pwcheck_method:saslauthd
+mech_list: PLAIN
--- /dev/null
+##VERSION: $Id: imapd.dist.in,v 1.41 2008/06/21 16:01:23 mrsam Exp $
+#
+# imapd created from imapd.dist by sysconftool
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# Copyright 1998 - 2008 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# This configuration file sets various options for the Courier-IMAP server
+# when used with the couriertcpd server.
+# A lot of the stuff here is documented in the manual page for couriertcpd.
+#
+# NOTE - do not use \ to split long variable contents on multiple lines.
+# This will break the default imapd.rc script, which parses this file.
+#
+##NAME: ADDRESS:0
+#
+# Address to listen on, can be set to a single IP address.
+#
+# ADDRESS=127.0.0.1
+
+ADDRESS=0
+
+##NAME: PORT:1
+#
+# Port numbers that connections are accepted on. The default is 143,
+# the standard IMAP port.
+#
+# Multiple port numbers can be separated by commas. When multiple port
+# numbers are used it is possible to select a specific IP address for a
+# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
+# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
+# The previous ADDRESS setting is a default for ports that do not have
+# a specified IP address.
+
+PORT=143
+
+##NAME: AUTHSERVICE:0
+#
+# It's possible to authenticate using a different 'service' parameter
+# depending on the connection's port. This only works with authentication
+# modules that use the 'service' parameter, such as PAM. Example:
+#
+# AUTHSERVICE143=imap
+# AUTHSERVICE993=imaps
+
+##NAME: MAXDAEMONS:0
+#
+# Maximum number of IMAP servers started
+#
+
+MAXDAEMONS=40
+
+##NAME: MAXPERIP:0
+#
+# Maximum number of connections to accept from the same IP address
+
+MAXPERIP=4
+
+##NAME: PIDFILE:0
+#
+# File where couriertcpd will save its process ID
+#
+
+PIDFILE=/var/run/imapd.pid
+
+##NAME: TCPDOPTS:0
+#
+# Miscellaneous couriertcpd options that shouldn't be changed.
+#
+
+TCPDOPTS="-nodnslookup -noidentlookup"
+
+##NAME: LOGGEROPTS:0
+#
+# courierlogger(1) options.
+#
+
+LOGGEROPTS="-name=imapd"
+
+##NAME: DEFDOMAIN:0
+#
+# Optional default domain. If the username does not contain the
+# first character of DEFDOMAIN, then it is appended to the username.
+# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
+# only if the username does not contain any character from DOMAINSEP.
+# You can set different default domains based on the the interface IP
+# address using the -access and -accesslocal options of couriertcpd(1).
+
+#DEFDOMAIN="@example.com"
+
+##NAME: IMAP_CAPABILITY:1
+#
+# IMAP_CAPABILITY specifies what most of the response should be to the
+# CAPABILITY command.
+#
+# If you have properly configured Courier to use CRAM-MD5, CRAM-SHA1, or
+# CRAM-SHA256 authentication (see INSTALL), set IMAP_CAPABILITY as follows:
+#
+# IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"
+#
+
+IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE"
+
+##NAME: KEYWORDS_CAPABILITY:0
+#
+# IMAP_KEYWORDS=1 enables custom IMAP keywords. Set this option to 0 to
+# disable custom keywords.
+#
+# IMAP_KEYWORDS=2 also enables custom IMAP keywords, but uses a slower
+# algorithm. Use this setting if keyword-related problems occur when
+# multiple IMAP clients are updating keywords on the same message.
+
+IMAP_KEYWORDS=1
+
+##NAME: ACL_CAPABILITY:0
+#
+# IMAP_ACL=1 enables IMAP ACL extension. Set this option to 0 to
+# disable ACL capabilities announce.
+
+IMAP_ACL=1
+
+##NAME: SMAP1_CAPABILITY:0
+#
+# EXPERIMENTAL
+#
+# To enable the experimental "Simple Mail Access Protocol" extensions,
+# uncomment the following setting.
+#
+# SMAP_CAPABILITY=SMAP1
+
+##NAME: IMAP_CAPABILITY_ORIG:2
+#
+# For use by webadmin
+
+IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"
+
+##NAME: IMAP_PROXY:0
+#
+# Enable proxying. See README.proxy
+
+IMAP_PROXY=0
+
+##NAME: PROXY_HOSTNAME:0
+#
+# Override value from gethostname() when checking if a proxy connection is
+# required.
+#
+# PROXY_HOSTNAME=
+
+##NAME: IMAP_PROXY_FOREIGN:0
+#
+# Proxying to non-Courier servers. Re-sends the CAPABILITY command after
+# logging in to the remote server. May not work with all IMAP clients.
+
+IMAP_PROXY_FOREIGN=0
+
+##NAME: IMAP_IDLE_TIMEOUT:0
+#
+# This setting controls how often
+# the server polls for changes to the folder, in IDLE mode (in seconds).
+
+IMAP_IDLE_TIMEOUT=60
+
+##NAME: IMAP_MAILBOX_SANITY_CHECK:0
+#
+# Sanity check -- make sure home directory and maildir's ownership matches
+# the IMAP server's effective uid and gid
+
+IMAP_MAILBOX_SANITY_CHECK=1
+
+##NAME: IMAP_CAPABILITY_TLS:0
+#
+# The following setting will advertise SASL PLAIN authentication after
+# STARTTLS is established. If you want to allow SASL PLAIN authentication
+# with or without TLS then just comment this out, and add AUTH=PLAIN to
+# IMAP_CAPABILITY
+
+IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"
+
+##NAME: IMAP_TLS_ORIG:0
+#
+# For use by webadmin
+
+IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"
+
+##NAME: IMAP_DISABLETHREADSORT:0
+#
+# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
+# server side sorting and threading.
+#
+# Those capabilities will still be advertised, but the server will reject
+# them. Set this option if you want to disable all the extra load from
+# server-side threading and sorting. Not advertising those capabilities
+# will simply result in the clients reading the entire folder, and sorting
+# it on the client side. That will still put some load on the server.
+# advertising these capabilities, but rejecting the commands, will stop this
+# silliness.
+#
+
+IMAP_DISABLETHREADSORT=0
+
+##NAME: IMAP_CHECK_ALL_FOLDERS:0
+#
+# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
+# mail in every folder. Not all IMAP clients use the IMAP's new mail
+# indicator, but some do. Normally new mail is checked only in INBOX,
+# because it is a comparatively time consuming operation, and it would be
+# a complete waste of time unless mail filters are used to deliver
+# mail directly to folders.
+#
+# When IMAP clients are used which support new mail indication, and when
+# mail filters are used to sort incoming mail into folders, setting
+# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
+# mail in folders. Note that this will result in slightly more load on the
+# server.
+#
+
+IMAP_CHECK_ALL_FOLDERS=0
+
+##NAME: IMAP_OBSOLETE_CLIENT:0
+#
+# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
+# what \\HasNoChildren really means.
+
+IMAP_OBSOLETE_CLIENT=0
+
+##NAME: IMAP_UMASK:0
+#
+# IMAP_UMASK sets the umask of the server process. The value of IMAP_UMASK is
+# simply passed to the "umask" command. The default value is 022.
+#
+# This feature is mostly useful for shared folders, where the file permissions
+# of the messages may be important.
+
+IMAP_UMASK=022
+
+##NAME: IMAP_ULIMITD:0
+#
+# IMAP_ULIMITD sets the maximum size of the data segment of the server
+# process. The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
+# command (or ulimit -v). The argument to ulimi sets the upper limit on the
+# size of the data segment of the server process, in kilobytes. The default
+# value of 65536 sets a very generous limit of 64 megabytes, which should
+# be more than plenty for anyone.
+#
+# This feature is used as an additional safety check that should stop
+# any potential denial-of-service attacks that exploit any kind of
+# a memory leak to exhaust all the available memory on the server.
+# It is theoretically possible that obscenely huge folders will also
+# result in the server running out of memory when doing server-side
+# sorting (by my calculations you have to have at least 100,000 messages
+# in a single folder, for that to happen).
+
+IMAP_ULIMITD=65536
+
+##NAME: IMAP_USELOCKS:0
+#
+# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent
+# multiple access to the same folder. This incurs slight additional
+# overhead. Concurrent multiple access will still work without this setting,
+# however occasionally a minor race condition may result in an IMAP client
+# downloading the same message twice, or a keyword update will fail.
+#
+# IMAP_USELOCKS=1 is strongly recommended when shared folders are used.
+
+IMAP_USELOCKS=1
+
+##NAME: IMAP_SHAREDINDEXFILE:0
+#
+# The index of all accessible folders. Do not change this setting unless
+# you know what you're doing. See README.sharedfolders for additional
+# information.
+
+IMAP_SHAREDINDEXFILE=/etc/courier-imap/shared/index
+
+##NAME: IMAP_ENHANCEDIDLE:0
+#
+# If Courier was compiled with the File Alteration Monitor, setting
+# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple
+# clients may open the same folder concurrently, and receive updates to
+# folder contents in realtime. See the imapd(8) man page for additional
+# information.
+#
+# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included
+# in the IMAP_CAPABILITY list.
+#
+
+IMAP_ENHANCEDIDLE=0
+
+##NAME: IMAP_TRASHFOLDERNAME:0
+#
+# The name of the magic trash Folder. For MSOE compatibility,
+# you can set IMAP_TRASHFOLDERNAME="Deleted Items".
+#
+# IMPORTANT: If you change this, you must also change IMAP_EMPTYTRASH
+
+IMAP_TRASHFOLDERNAME=Trash
+
+##NAME: IMAP_EMPTYTRASH:0
+#
+# The following setting is optional, and causes messages from the given
+# folder to be automatically deleted after the given number of days.
+# IMAP_EMPTYTRASH is a comma-separated list of folder:days. The default
+# setting, below, purges 7 day old messages from the Trash folder.
+# Another useful setting would be:
+#
+# IMAP_EMPTYTRASH=Trash:7,Sent:30
+#
+# This would also delete messages from the Sent folder (presumably copies
+# of sent mail) after 30 days. This is a global setting that is applied to
+# every mail account, and is probably useful in a controlled, corporate
+# environment.
+#
+# Important: the purging is controlled by CTIME, not MTIME (the file time
+# as shown by ls). It is perfectly ordinary to see stuff in Trash that's
+# a year old. That's the file modification time, MTIME, that's displayed.
+# This is generally when the message was originally delivered to this
+# mailbox. Purging is controlled by a different timestamp, CTIME, which is
+# changed when the file is moved to the Trash folder (and at other times too).
+#
+# You might want to disable this setting in certain situations - it results
+# in a stat() of every file in each folder, at login and logout.
+#
+
+IMAP_EMPTYTRASH=Trash:7
+
+##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
+#
+# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash. This
+# effectively allows an undo of message deletion by fishing the deleted
+# mail from trash. Trash can be manually expunged as usually, and mail
+# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
+#
+# NOTE: shared folders are still expunged as usual. Shared folders are
+# not affected.
+#
+
+IMAP_MOVE_EXPUNGE_TO_TRASH=0
+
+
+##NAME: OUTBOX:0
+#
+# The next set of options deal with the "Outbox" enhancement.
+# Uncomment the following setting to create a special folder, named
+# INBOX.Outbox
+#
+# OUTBOX=.Outbox
+
+##NAME: SENDMAIL:0
+#
+# If OUTBOX is defined, mail can be sent via the IMAP connection by copying
+# a message to the INBOX.Outbox folder. For all practical matters,
+# INBOX.Outbox looks and behaves just like any other IMAP folder. If this
+# folder doesn't exist it must be created by the IMAP mail client, just
+# like any other IMAP folder. The kicker: any message copied or moved to
+# this folder is will be E-mailed by the Courier-IMAP server, by running
+# the SENDMAIL program. Therefore, messages copied or moved to this
+# folder must be well-formed RFC-2822 messages, with the recipient list
+# specified in the To:, Cc:, and Bcc: headers. Courier-IMAP relies on
+# SENDMAIL to read the recipient list from these headers (and delete the Bcc:
+# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the
+# message piped on standard input. $SENDER will be the return address
+# of the message, which is set by the authentication module.
+#
+# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing.
+#
+
+SENDMAIL=/usr/sbin/sendmail
+
+##NAME: HEADERFROM:0
+#
+# For administrative and oversight purposes, the return address, $SENDER
+# will also be saved in the X-IMAP-Sender mail header. This header gets
+# added to the sent E-mail (but it doesn't get saved in the copy of the
+# message that's saved in the folder)
+#
+# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive
+# the magic OUTBOX treatment. Therefore advance LARTing is in order for
+# _all_ of your lusers, until every one of them is aware of this. Otherwise if
+# OUTBOX is left at its default setting - a folder name that might be used
+# accidentally - some people may be in for a rude surprise. You can redefine
+# the name of the magic folder by changing OUTBOX, above. You should do that
+# and pick a less-obvious name. Perhaps brand it with your organizational
+# name ( OUTBOX=.WidgetsAndSonsOutbox )
+
+HEADERFROM=X-IMAP-Sender
+
+##NAME: OUTBOX_MULTIPLE_SEND:0
+#
+# Remove the following comment to allow a COPY of more than one message to
+# the Outbox, at a time.
+#
+# OUTBOX_MULTIPLE_SEND=1
+
+##NAME: IMAPDSTART:0
+#
+# IMAPDSTART is not used directly. Rather, this is a convenient flag to
+# be read by your system startup script in /etc/rc.d, like this:
+#
+# . /etc/courier-imap/imapd
+#
+# case x$IMAPDSTART in
+# x[yY]*)
+# /usr/lib64/courier-imap/imapd.rc start
+# ;;
+# esac
+#
+# The default setting is going to be NO, so you'll have to manually flip
+# it to yes.
+
+IMAPDSTART=NO
+
+##NAME: MAILDIRPATH:0
+#
+# MAILDIRPATH - directory name of the maildir directory.
+#
+MAILDIRPATH=Maildir
+
+# Hardwire a value for ${MAILDIR}
+MAILDIR=.maildir
+MAILDIRPATH=.maildir
+# Put any program for ${PRERUN} here
+PRERUN=
+# Put any program for ${LOGINRUN} here
+# this is for relay-ctrl-allow in 4*
+LOGINRUN=
--- /dev/null
+##VERSION: $Id: imapd-ssl.dist.in,v 1.21 2008/07/12 20:17:24 mrsam Exp $
+#
+# imapd-ssl created from imapd-ssl.dist by sysconftool
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# Copyright 2000 - 2008 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# This configuration file sets various options for the Courier-IMAP server
+# when used to handle SSL IMAP connections.
+#
+# SSL and non-SSL connections are handled by a dedicated instance of the
+# couriertcpd daemon. If you are accepting both SSL and non-SSL IMAP
+# connections, you will start two instances of couriertcpd, one on the
+# IMAP port 143, and another one on the IMAP-SSL port 993.
+#
+# Download OpenSSL from http://www.openssl.org/
+#
+##NAME: SSLPORT:1
+#
+# Options in the imapd-ssl configuration file AUGMENT the options in the
+# imapd configuration file. First the imapd configuration file is read,
+# then the imapd-ssl configuration file, so we do not have to redefine
+# anything.
+#
+# However, some things do have to be redefined. The port number is
+# specified by SSLPORT, instead of PORT. The default port is port 993.
+#
+# Multiple port numbers can be separated by commas. When multiple port
+# numbers are used it is possibly to select a specific IP address for a
+# given port as "ip.port". For example, "127.0.0.1.900,192.168.0.1.900"
+# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.168.0.1
+# The SSLADDRESS setting is a default for ports that do not have
+# a specified IP address.
+
+SSLPORT=993
+
+##NAME: SSLADDRESS:0
+#
+# Address to listen on, can be set to a single IP address.
+#
+# SSLADDRESS=127.0.0.1
+
+SSLADDRESS=0
+
+##NAME: SSLPIDFILE:0
+#
+# That's the SSL IMAP port we'll listen on.
+# Feel free to redefine MAXDAEMONS, TCPDOPTS, and MAXPERIP.
+
+SSLPIDFILE=/var/run/imapd-ssl.pid
+
+##NAME: SSLLOGGEROPTS:0
+#
+# courierlogger(1) options.
+#
+
+SSLLOGGEROPTS="-name=imapd-ssl"
+
+##NAME: IMAPDSSLSTART:0
+#
+# Different pid files, so that both instances of couriertcpd can coexist
+# happily.
+#
+# You can also redefine IMAP_CAPABILITY, although I can't
+# think of why you'd want to do that.
+#
+#
+# Ok, the following settings are new to imapd-ssl:
+#
+# Whether or not to start IMAP over SSL on simap port:
+
+IMAPDSSLSTART=NO
+
+##NAME: IMAPDSTARTTLS:0
+#
+# Whether or not to implement IMAP STARTTLS extension instead:
+
+IMAPDSTARTTLS=YES
+
+##NAME: IMAP_TLS_REQUIRED:1
+#
+# Set IMAP_TLS_REQUIRED to 1 if you REQUIRE STARTTLS for everyone.
+# (this option advertises the LOGINDISABLED IMAP capability, until STARTTLS
+# is issued).
+
+IMAP_TLS_REQUIRED=0
+
+
+#########################################################################
+#
+# The following variables configure IMAP over SSL. If OpenSSL or GnuTLS
+# is available during configuration, the couriertls helper gets compiled, and
+# upon installation a dummy TLS_CERTFILE gets generated.
+#
+# WARNING: Peer certificate verification has NOT yet been tested. Proceed
+# at your own risk. Only the basic SSL/TLS functionality is known to be
+# working. Keep this in mind as you play with the following variables.
+#
+##NAME: COURIERTLS:0
+#
+
+COURIERTLS=/usr/sbin/couriertls
+
+##NAME: TLS_PROTOCOL:0
+#
+# TLS_PROTOCOL sets the protocol version. The possible versions are:
+#
+# OpenSSL:
+#
+# SSL2 - SSLv2
+# SSL3 - SSLv3
+# SSL23 - either SSLv2 or SSLv3 (also TLS1, it seems)
+# TLS1 - TLS1
+#
+# Note that this setting, with OpenSSL, is modified by the TLS_CIPHER_LIST
+# setting, below.
+#
+# GnuTLS:
+#
+# SSL3 - SSLv3
+# TLS1 - TLS 1.0
+# TLS1_1 - TLS 1.1
+#
+# When compiled against GnuTLS, multiple protocols can be selected as follows:
+#
+# TLS_PROTOCOL="TLS1_1:TLS1:SSL3"
+#
+# DEFAULT VALUES:
+#
+# SSL23 (OpenSSL), or "TLS_1:TLS1:SSL3" (GnuTLS)
+
+##NAME: TLS_STARTTLS_PROTOCOL:0
+#
+# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the IMAP STARTTLS
+# extension, as opposed to IMAP over SSL on port 993.
+#
+# It takes the same values for OpenSSL/GnuTLS as TLS_PROTOCOL
+
+##NAME: TLS_CIPHER_LIST:0
+#
+# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the
+# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST
+# undefined
+#
+# OpenSSL:
+#
+# TLS_CIPHER_LIST="SSLv3:TLSv1:!SSLv2:HIGH:!LOW:!MEDIUM:!EXP:!NULL@STRENGTH"
+#
+# To enable SSL2, remove the obvious "!SSLv2" part from the above list.
+#
+#
+# GnuTLS:
+#
+# TLS_CIPHER_LIST="HIGH:MEDIUM"
+#
+# The actual list of available ciphers depend on the options GnuTLS was
+# compiled against. The possible ciphers are:
+#
+# AES256, 3DES, AES128, ARC128, ARC40, RC2, DES, NULL
+#
+# Also, the following aliases:
+#
+# HIGH -- all ciphers that use more than a 128 bit key size
+# MEDIUM -- all ciphers that use a 128 bit key size
+# LOW -- all ciphers that use fewer than a 128 bit key size, the NULL cipher
+# is not included
+# ALL -- all ciphers except the NULL cipher
+
+##NAME: TLS_MIN_DH_BITS:0
+#
+# TLS_MIN_DH_BITS=n
+#
+# GnuTLS only:
+#
+# Set the minimum number of acceptable bits for a DH key exchange.
+#
+# GnuTLS's compiled-in default is 727 bits (as of GnuTLS 1.6.3). Some server
+# have been encountered that offer 512 bit keys. You may have to set
+# TLS_MIN_DH_BITS=512 here, if necessary.
+
+##NAME: TLS_KX_LIST:0
+#
+# GnuTLS only:
+#
+# Allowed key exchange protocols. The default of "ALL" should be sufficient.
+# The list of supported key exchange protocols depends on the options GnuTLS
+# was compiled against, but may include the following:
+#
+# DHERSA, DHEDSS, RSA, SRP, SRPRSA, SRPDSS, PSK, DHEPSK, ANONDH, RSAEXPORT
+
+TLS_KX_LIST=ALL
+
+##NAME: TLS_COMPRESSION:0
+#
+# GnuTLS only:
+#
+# Optional compression. "ALL" selects all available compression methods.
+#
+# Available compression methods: DEFLATE, LZO, NULL
+
+TLS_COMPRESSION=ALL
+
+##NAME: TLS_CERTS:0
+#
+# GnuTLS only:
+#
+# Supported certificate types are X509 and OPENPGP.
+#
+# OPENPGP has not been tested
+
+TLS_CERTS=X509
+
+##NAME: TLS_TIMEOUT:0
+# TLS_TIMEOUT is currently not implemented, and reserved for future use.
+# This is supposed to be an inactivity timeout, but its not yet implemented.
+#
+
+##NAME: TLS_DHCERTFILE:0
+#
+# TLS_DHCERTFILE - PEM file that stores a Diffie-Hellman -based certificate.
+# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA
+# you must generate a DH pair that will be used. In most situations the
+# DH pair is to be treated as confidential, and the file specified by
+# TLS_DHCERTFILE must not be world-readable.
+#
+# TLS_DHCERTFILE=
+
+##NAME: TLS_CERTFILE:0
+#
+# TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS
+# servers, and is optional for SSL/TLS clients. TLS_CERTFILE is usually
+# treated as confidential, and must not be world-readable. Set TLS_CERTFILE
+# instead of TLS_DHCERTFILE if this is a garden-variety certificate
+#
+# VIRTUAL HOSTS (servers only):
+#
+# Due to technical limitations in the original SSL/TLS protocol, a dedicated
+# IP address is required for each virtual host certificate. If you have
+# multiple certificates, install each certificate file as
+# $TLS_CERTFILE.aaa.bbb.ccc.ddd, where "aaa.bbb.ccc.ddd" is the IP address
+# for the certificate's domain name. So, if TLS_CERTFILE is set to
+# /etc/certificate.pem, then you'll need to install the actual certificate
+# files as /etc/certificate.pem.192.168.0.2, /etc/certificate.pem.192.168.0.3
+# and so on, for each IP address.
+#
+# GnuTLS only (servers only):
+#
+# GnuTLS implements a new TLS extension that eliminates the need to have a
+# dedicated IP address for each SSL/TLS domain name. Install each certificate
+# as $TLS_CERTFILE.domain, so if TLS_CERTFILE is set to /etc/certificate.pem,
+# then you'll need to install the actual certificate files as
+# /etc/certificate.pem.host1.example.com, /etc/certificate.pem.host2.example.com
+# and so on.
+#
+# Note that this TLS extension also requires a corresponding support in the
+# client. Older SSL/TLS clients may not support this feature.
+#
+# This is an experimental feature.
+
+TLS_CERTFILE=/etc/courier-imap/imapd.pem
+
+##NAME: TLS_TRUSTCERTS:0
+#
+# TLS_TRUSTCERTS=pathname - load trusted certificates from pathname.
+# pathname can be a file or a directory. If a file, the file should
+# contain a list of trusted certificates, in PEM format. If a
+# directory, the directory should contain the trusted certificates,
+# in PEM format, one per file and hashed using OpenSSL's c_rehash
+# script. TLS_TRUSTCERTS is used by SSL/TLS clients (by specifying
+# the -domain option) and by SSL/TLS servers (TLS_VERIFYPEER is set
+# to PEER or REQUIREPEER).
+#
+
+TLS_TRUSTCERTS=/etc/ssl/certs
+
+##NAME: TLS_VERIFYPEER:0
+#
+# TLS_VERIFYPEER - how to verify client certificates. The possible values of
+# this setting are:
+#
+# NONE - do not verify anything
+#
+# PEER - verify the client certificate, if one's presented
+#
+# REQUIREPEER - require a client certificate, fail if one's not presented
+#
+#
+TLS_VERIFYPEER=NONE
+
+
+##NAME: TLS_EXTERNAL:0
+#
+# To enable SSL certificate-based authentication:
+#
+# 1) TLS_TRUSTCERTS must be set to a pathname that holds your certificate
+# authority's SSL certificate
+#
+# 2) TLS_VERIFYPEER=PEER or TLS_VERIFYPEER=REQUIREPEER (the later settings
+# requires all SSL clients to present a certificate, and rejects
+# SSL/TLS connections without a valid cert).
+#
+# 3) Set TLS_EXTERNAL, below, to the subject field that holds the login ID.
+# Example:
+#
+# TLS_EXTERNAL=emailaddress
+#
+# The above example retrieves the login ID from the "emailaddress" subject
+# field. The certificate's emailaddress subject must match exactly the login
+# ID in the courier-authlib database.
+
+##NAME: TLS_CACHE:0
+#
+# A TLS/SSL session cache may slightly improve response for IMAP clients
+# that open multiple SSL sessions to the server. TLS_CACHEFILE will be
+# automatically created, TLS_CACHESIZE bytes long, and used as a cache
+# buffer.
+#
+# This is an experimental feature and should be disabled if it causes
+# problems with SSL clients. Disable SSL caching by commenting out the
+# following settings:
+
+TLS_CACHEFILE=/var/lib/courier-imap/couriersslcache
+TLS_CACHESIZE=524288
+
+##NAME: MAILDIRPATH:0
+#
+# MAILDIRPATH - directory name of the maildir directory.
+#
+MAILDIRPATH=Maildir
+
+# Hardwire a value for ${MAILDIR}
+MAILDIR=.maildir
+MAILDIRPATH=.maildir
--- /dev/null
+
+RANDFILE = /usr/share/imapd.rand
+
+[ req ]
+default_bits = 1024
+encrypt_key = yes
+distinguished_name = req_dn
+x509_extensions = cert_type
+prompt = no
+
+[ req_dn ]
+C=US
+ST=NY
+L=New York
+O=Courier Mail Server
+OU=Automatically-generated IMAP SSL key
+CN=localhost
+emailAddress=postmaster@example.com
+
+
+[ cert_type ]
+nsCertType = server
--- /dev/null
+##VERSION: $Id: pop3d.dist.in,v 1.16 2005/07/05 12:42:51 mrsam Exp $
+#
+# pop3d created from pop3d.dist by sysconftool
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# Copyright 1998 - 2004 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# Courier POP3 daemon configuration
+#
+##NAME: PIDFILE:0
+#
+
+PIDFILE=/var/run/pop3d.pid
+
+##NAME: MAXDAEMONS:0
+#
+# Maximum number of POP3 servers started
+#
+
+MAXDAEMONS=40
+
+##NAME: MAXPERIP:4
+#
+# Maximum number of connections to accept from the same IP address
+
+MAXPERIP=4
+
+##NAME: POP3AUTH:1
+#
+# To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH
+# variable:
+#
+# POP3AUTH="LOGIN"
+#
+# If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH
+# to something like this:
+#
+# POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1"
+
+POP3AUTH=""
+
+##NAME: POP3AUTH_ORIG:1
+#
+# For use by webadmin
+
+POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256"
+
+##NAME: POP3AUTH_TLS:1
+#
+# To also advertise SASL PLAIN if SSL is enabled, uncomment the
+# POP3AUTH_TLS environment variable:
+#
+# POP3AUTH_TLS="LOGIN PLAIN"
+
+POP3AUTH_TLS=""
+
+##NAME: POP3AUTH_TLS_ORIG:0
+#
+# For use by webadmin
+
+POP3AUTH_TLS_ORIG="LOGIN PLAIN"
+
+##NAME: POP3_PROXY:0
+#
+# Enable proxying. See README.proxy
+
+POP3_PROXY=0
+
+##NAME: PROXY_HOSTNAME:0
+#
+# Override value from gethostname() when checking if a proxy connection is
+# required.
+
+# PROXY_HOSTNAME=
+
+##NAME: PORT:1
+#
+# Port to listen on for connections. The default is port 110.
+#
+# Multiple port numbers can be separated by commas. When multiple port
+# numbers are used it is possibly to select a specific IP address for a
+# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
+# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
+# The ADDRESS setting is a default for ports that do not have a specified
+# IP address.
+
+PORT=110
+
+##NAME: ADDRESS:0
+#
+# IP address to listen on. 0 means all IP addresses.
+
+ADDRESS=0
+
+##NAME: TCPDOPTS:0
+#
+# Other couriertcpd(1) options. The following defaults should be fine.
+#
+
+TCPDOPTS="-nodnslookup -noidentlookup"
+
+##NAME: LOGGEROPTS:0
+#
+# courierlogger(1) options.
+#
+
+LOGGEROPTS="-name=pop3d"
+
+##NAME: DEFDOMAIN:0
+#
+# Optional default domain. If the username does not contain the
+# first character of DEFDOMAIN, then it is appended to the username.
+# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
+# only if the username does not contain any character from DOMAINSEP.
+# You can set different default domains based on the the interface IP
+# address using the -access and -accesslocal options of couriertcpd(1).
+
+#DEFDOMAIN="@example.com"
+
+##NAME: POP3DSTART:0
+#
+# POP3DSTART is not referenced anywhere in the standard Courier programs
+# or scripts. Rather, this is a convenient flag to be read by your system
+# startup script in /etc/rc.d, like this:
+#
+# . /etc/courier-imap/pop3d
+# case x$POP3DSTART in
+# x[yY]*)
+# /usr/lib64/courier-imap/pop3d.rc start
+# ;;
+# esac
+#
+# The default setting is going to be NO, until Courier is shipped by default
+# with enough platforms so that people get annoyed with having to flip it to
+# YES every time.
+
+POP3DSTART=NO
+
+##NAME: MAILDIRPATH:0
+#
+# MAILDIRPATH - directory name of the maildir directory.
+#
+MAILDIRPATH=Maildir
+
+# Hardwire a value for ${MAILDIR}
+MAILDIR=.maildir
+MAILDIRPATH=.maildir
+# Put any program for ${PRERUN} here
+PRERUN=
+# Put any program for ${LOGINRUN} here
+# this is for relay-ctrl-allow in 4*
+LOGINRUN=
--- /dev/null
+##VERSION: $Id: pop3d-ssl.dist.in,v 1.22 2008/07/12 20:17:25 mrsam Exp $
+#
+# pop3d-ssl created from pop3d-ssl.dist by sysconftool
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# Copyright 2000-2008 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# This configuration file sets various options for the Courier-IMAP server
+# when used to handle SSL POP3 connections.
+#
+# SSL and non-SSL connections are handled by a dedicated instance of the
+# couriertcpd daemon. If you are accepting both SSL and non-SSL POP3
+# connections, you will start two instances of couriertcpd, one on the
+# POP3 port 110, and another one on the POP3-SSL port 995.
+#
+# Download OpenSSL from http://www.openssl.org/
+#
+##NAME: SSLPORT:0
+#
+# Options in the pop3d-ssl configuration file AUGMENT the options in the
+# pop3d configuration file. First the pop3d configuration file is read,
+# then the pop3d-ssl configuration file, so we do not have to redefine
+# anything.
+#
+# However, some things do have to be redefined. The port number is
+# specified by SSLPORT, instead of PORT. The default port is port 995.
+#
+# Multiple port numbers can be separated by commas. When multiple port
+# numbers are used it is possibly to select a specific IP address for a
+# given port as "ip.port". For example, "127.0.0.1.900,192.168.0.1.900"
+# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.168.0.1
+# The SSLADDRESS setting is a default for ports that do not have
+# a specified IP address.
+
+SSLPORT=995
+
+##NAME: SSLADDRESS:0
+#
+# Address to listen on, can be set to a single IP address.
+#
+# SSLADDRESS=127.0.0.1
+
+SSLADDRESS=0
+
+##NAME: SSLPIDFILE:0
+#
+
+SSLPIDFILE=/var/run/pop3d-ssl.pid
+
+##NAME: SSLLOGGEROPTS:0
+#
+# courierlogger(1) options.
+#
+
+SSLLOGGEROPTS="-name=pop3d-ssl"
+
+##NAME: POP3DSSLSTART:0
+#
+# Whether or not to start POP3 over SSL on spop3 port:
+
+POP3DSSLSTART=NO
+
+##NAME: POP3_STARTTLS:0
+#
+# Whether or not to implement the POP3 STLS extension:
+
+POP3_STARTTLS=YES
+
+##NAME: POP3_TLS_REQUIRED:1
+#
+# Set POP3_TLS_REQUIRED to 1 if you REQUIRE STARTTLS for everyone.
+# (this option advertises the LOGINDISABLED POP3 capability, until STARTTLS
+# is issued).
+
+POP3_TLS_REQUIRED=0
+
+##NAME: COURIERTLS:0
+#
+# The following variables configure POP3 over SSL. If OpenSSL or GnuTLS
+# is available during configuration, the couriertls helper gets compiled, and
+# upon installation a dummy TLS_CERTFILE gets generated.
+#
+# WARNING: Peer certificate verification has NOT yet been tested. Proceed
+# at your own risk. Only the basic SSL/TLS functionality is known to be
+# working. Keep this in mind as you play with the following variables.
+
+COURIERTLS=/usr/sbin/couriertls
+
+##NAME: TLS_PROTOCOL:0
+#
+# TLS_PROTOCOL sets the protocol version. The possible versions are:
+#
+# OpenSSL:
+#
+# SSL2 - SSLv2
+# SSL3 - SSLv3
+# SSL23 - either SSLv2 or SSLv3 (also TLS1, it seems)
+# TLS1 - TLS1
+#
+# Note that this setting, with OpenSSL, is modified by the TLS_CIPHER_LIST
+# setting, below.
+#
+# GnuTLS:
+#
+# SSL3 - SSLv3
+# TLS1 - TLS 1.0
+# TLS1_1 - TLS 1.1
+#
+# When compiled against GnuTLS, multiple protocols can be selected as follows:
+#
+# TLS_PROTOCOL="TLS1_1:TLS1:SSL3"
+#
+# DEFAULT VALUES:
+#
+# SSL23 (OpenSSL), or "TLS_1:TLS1:SSL3" (GnuTLS)
+
+##NAME: TLS_STARTTLS_PROTOCOL:0
+#
+# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the POP3 STARTTLS
+# extension, as opposed to POP3 over SSL on port 995.
+#
+# It takes the same values for OpenSSL/GnuTLS as TLS_PROTOCOL
+
+TLS_STARTTLS_PROTOCOL=TLS1
+
+##NAME: TLS_CIPHER_LIST:0
+#
+# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the
+# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST
+# undefined
+#
+# OpenSSL:
+#
+# TLS_CIPHER_LIST="SSLv3:TLSv1:!SSLv2:HIGH:!LOW:!MEDIUM:!EXP:!NULL@STRENGTH"
+#
+# To enable SSL2, remove the obvious "!SSLv2" part from the above list.
+#
+#
+# GnuTLS:
+#
+# TLS_CIPHER_LIST="HIGH:MEDIUM"
+#
+# The actual list of available ciphers depend on the options GnuTLS was
+# compiled against. The possible ciphers are:
+#
+# AES256, 3DES, AES128, ARC128, ARC40, RC2, DES, NULL
+#
+# Also, the following aliases:
+#
+# HIGH -- all ciphers that use more than a 128 bit key size
+# MEDIUM -- all ciphers that use a 128 bit key size
+# LOW -- all ciphers that use fewer than a 128 bit key size, the NULL cipher
+# is not included
+# ALL -- all ciphers except the NULL cipher
+
+
+##NAME: TLS_MIN_DH_BITS:0
+#
+# TLS_MIN_DH_BITS=n
+#
+# GnuTLS only:
+#
+# Set the minimum number of acceptable bits for a DH key exchange.
+#
+# GnuTLS's compiled-in default is 727 bits (as of GnuTLS 1.6.3). Some server
+# have been encountered that offer 512 bit keys. You may have to set
+# TLS_MIN_DH_BITS=512 here, if necessary.
+
+##NAME: TLS_KX_LIST:0
+#
+# GnuTLS only:
+#
+# Allowed key exchange protocols. The default of "ALL" should be sufficient.
+# The list of supported key exchange protocols depends on the options GnuTLS
+# was compiled against, but may include the following:
+#
+# DHERSA, DHEDSS, RSA, SRP, SRPRSA, SRPDSS, PSK, DHEPSK, ANONDH, RSAEXPORT
+
+TLS_KX_LIST=ALL
+
+##NAME: TLS_COMPRESSION:0
+#
+# GnuTLS only:
+#
+# Optional compression. "ALL" selects all available compression methods.
+#
+# Available compression methods: DEFLATE, LZO, NULL
+
+TLS_COMPRESSION=ALL
+
+##NAME: TLS_CERTS:0
+#
+# GnuTLS only:
+#
+# Supported certificate types are X509 and OPENPGP.
+#
+# OPENPGP has not been tested
+
+TLS_CERTS=X509
+
+##NAME: TLS_TIMEOUT:0
+# TLS_TIMEOUT is currently not implemented, and reserved for future use.
+# This is supposed to be an inactivity timeout, but its not yet implemented.
+#
+
+##NAME: TLS_DHCERTFILE:0
+#
+# TLS_DHCERTFILE - PEM file that stores a Diffie-Hellman -based certificate.
+# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA
+# you must generate a DH pair that will be used. In most situations the
+# DH pair is to be treated as confidential, and the file specified by
+# TLS_DHCERTFILE must not be world-readable.
+#
+# TLS_DHCERTFILE=
+
+##NAME: TLS_CERTFILE:0
+#
+# TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS
+# servers, and is optional for SSL/TLS clients. TLS_CERTFILE is usually
+# treated as confidential, and must not be world-readable. Set TLS_CERTFILE
+# instead of TLS_DHCERTFILE if this is a garden-variety certificate
+#
+# VIRTUAL HOSTS (servers only):
+#
+# Due to technical limitations in the original SSL/TLS protocol, a dedicated
+# IP address is required for each virtual host certificate. If you have
+# multiple certificates, install each certificate file as
+# $TLS_CERTFILE.aaa.bbb.ccc.ddd, where "aaa.bbb.ccc.ddd" is the IP address
+# for the certificate's domain name. So, if TLS_CERTFILE is set to
+# /etc/certificate.pem, then you'll need to install the actual certificate
+# files as /etc/certificate.pem.192.168.0.2, /etc/certificate.pem.192.168.0.3
+# and so on, for each IP address.
+#
+# GnuTLS only (servers only):
+#
+# GnuTLS implements a new TLS extension that eliminates the need to have a
+# dedicated IP address for each SSL/TLS domain name. Install each certificate
+# as $TLS_CERTFILE.domain, so if TLS_CERTFILE is set to /etc/certificate.pem,
+# then you'll need to install the actual certificate files as
+# /etc/certificate.pem.host1.example.com, /etc/certificate.pem.host2.example.com
+# and so on.
+#
+# Note that this TLS extension also requires a corresponding support in the
+# client. Older SSL/TLS clients may not support this feature.
+#
+# This is an experimental feature.
+
+TLS_CERTFILE=/etc/courier-imap/pop3d.pem
+
+##NAME: TLS_TRUSTCERTS:0
+#
+# TLS_TRUSTCERTS=pathname - load trusted certificates from pathname.
+# pathname can be a file or a directory. If a file, the file should
+# contain a list of trusted certificates, in PEM format. If a
+# directory, the directory should contain the trusted certificates,
+# in PEM format, one per file and hashed using OpenSSL's c_rehash
+# script. TLS_TRUSTCERTS is used by SSL/TLS clients (by specifying
+# the -domain option) and by SSL/TLS servers (TLS_VERIFYPEER is set
+# to PEER or REQUIREPEER).
+#
+
+TLS_TRUSTCERTS=/etc/ssl/certs
+
+##NAME: TLS_VERIFYPEER:0
+#
+# TLS_VERIFYPEER - how to verify client certificates. The possible values of
+# this setting are:
+#
+# NONE - do not verify anything
+#
+# PEER - verify the client certificate, if one's presented
+#
+# REQUIREPEER - require a client certificate, fail if one's not presented
+#
+#
+TLS_VERIFYPEER=NONE
+
+##NAME: TLS_EXTERNAL:0
+#
+# To enable SSL certificate-based authentication:
+#
+# 1) TLS_TRUSTCERTS must be set to a pathname that holds your certificate
+# authority's SSL certificate
+#
+# 2) TLS_VERIFYPEER=PEER or TLS_VERIFYPEER=REQUIREPEER (the later settings
+# requires all SSL clients to present a certificate, and rejects
+# SSL/TLS connections without a valid cert).
+#
+# 3) Set TLS_EXTERNAL, below, to the subject field that holds the login ID.
+# Example:
+#
+# TLS_EXTERNAL=emailaddress
+#
+# The above example retrieves the login ID from the "emailaddress" subject
+# field. The certificate's emailaddress subject must match exactly the login
+# ID in the courier-authlib database.
+
+##NAME: TLS_CACHE:0
+#
+# A TLS/SSL session cache may slightly improve response for long-running
+# POP3 clients. TLS_CACHEFILE will be automatically created, TLS_CACHESIZE
+# bytes long, and used as a cache buffer.
+#
+# This is an experimental feature and should be disabled if it causes
+# problems with SSL clients. Disable SSL caching by commenting out the
+# following settings:
+
+TLS_CACHEFILE=/var/lib/courier-imap/couriersslcache
+TLS_CACHESIZE=524288
+
+##NAME: MAILDIRPATH:0
+#
+# MAILDIRPATH - directory name of the maildir directory.
+#
+MAILDIRPATH=Maildir
+
+# Hardwire a value for ${MAILDIR}
+MAILDIR=.maildir
+MAILDIRPATH=.maildir
--- /dev/null
+
+RANDFILE = /usr/share/pop3d.rand
+
+[ req ]
+default_bits = 1024
+encrypt_key = yes
+distinguished_name = req_dn
+x509_extensions = cert_type
+prompt = no
+
+[ req_dn ]
+C=US
+ST=NY
+L=New York
+O=Courier Mail Server
+OU=Automatically-generated POP3 SSL key
+CN=localhost
+emailAddress=postmaster@example.com
+
+
+[ cert_type ]
+nsCertType = server
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.01.39; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $
-#
-# Copyright 2000-2005 Double Precision, Inc. See COPYING for
-# distribution information.
-#
-# authdaemonrc created from authdaemonrc.dist by sysconftool
-#
-# Do not alter lines that begin with ##, they are used when upgrading
-# this configuration.
-#
-# This file configures authdaemond, the resident authentication daemon.
-#
-# Comments in this file are ignored. Although this file is intended to
-# be sourced as a shell script, authdaemond parses it manually, so
-# the acceptable syntax is a bit limited. Multiline variable contents,
-# with the \ continuation character, are not allowed. Everything must
-# fit on one line. Do not use any additional whitespace for indentation,
-# or anything else.
-
-##NAME: authmodulelist:2
-#
-# The authentication modules that are linked into authdaemond. The
-# default list is installed. You may selectively disable modules simply
-# by removing them from the following list. The available modules you
-# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe
-
-authmodulelist="authmysql "
-
-##NAME: authmodulelistorig:3
-#
-# This setting is used by Courier's webadmin module, and should be left
-# alone
-
-authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe"
-
-##NAME: daemons:0
-#
-# The number of daemon processes that are started. authdaemon is typically
-# installed where authentication modules are relatively expensive: such
-# as authldap, or authmysql, so it's better to have a number of them running.
-# PLEASE NOTE: Some platforms may experience a problem if there's more than
-# one daemon. Specifically, SystemV derived platforms that use TLI with
-# socket emulation. I'm suspicious of TLI's ability to handle multiple
-# processes accepting connections on the same filesystem domain socket.
-#
-# You may need to increase daemons if as your system load increases. Symptoms
-# include sporadic authentication failures. If you start getting
-# authentication failures, increase daemons. However, the default of 5
-# SHOULD be sufficient. Bumping up daemon count is only a short-term
-# solution. The permanent solution is to add more resources: RAM, faster
-# disks, faster CPUs...
-
-daemons=5
-
-##NAME: authdaemonvar:2
-#
-# authdaemonvar is here, but is not used directly by authdaemond. It's
-# used by various configuration and build scripts, so don't touch it!
-
-authdaemonvar=/var/lib/courier/authdaemon
-
-##NAME: DEBUG_LOGIN:0
-#
-# Dump additional diagnostics to syslog
-#
-# DEBUG_LOGIN=0 - turn off debugging
-# DEBUG_LOGIN=1 - turn on debugging
-# DEBUG_LOGIN=2 - turn on debugging + log passwords too
-#
-# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog.
-#
-# Note that most information is sent to syslog at level 'debug', so
-# you may need to modify your /etc/syslog.conf to be able to see it.
-
-DEBUG_LOGIN=0
-
-##NAME: DEFAULTOPTIONS:0
-#
-# A comma-separated list of option=value pairs. Each option is applied
-# to an account if the account does not have its own specific value for
-# that option. So for example, you can set
-# DEFAULTOPTIONS="disablewebmail=1,disableimap=1"
-# and then enable webmail and/or imap on individual accounts by setting
-# disablewebmail=0 and/or disableimap=0 on the account.
-
-DEFAULTOPTIONS=""
-
-##NAME: LOGGEROPTS:0
-#
-# courierlogger(1) options, e.g. to set syslog facility
-#
-
-LOGGEROPTS=""
-
-##NAME: LDAP_TLS_OPTIONS:0
-#
-# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'.
-# Examples:
-#
-#LDAPTLS_CACERT=/path/to/cacert.pem
-#LDAPTLS_REQCERT=demand
-#LDAPTLS_CERT=/path/to/clientcert.pem
-#LDAPTLS_KEY=/path/to/clientkey.pem
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.01.39; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@##VERSION: $Id: authldaprc,v 1.25 2005/10/05 00:07:32 mrsam Exp $
-#
-# Copyright 2000-2004 Double Precision, Inc. See COPYING for
-# distribution information.
-#
-# Do not alter lines that begin with ##, they are used when upgrading
-# this configuration.
-#
-# authldaprc created from authldaprc.dist by sysconftool
-#
-# DO NOT INSTALL THIS FILE with world read permissions. This file
-# might contain the LDAP admin password!
-#
-# This configuration file specifies LDAP authentication parameters
-#
-# The format of this file must be as follows:
-#
-# field[spaces|tabs]value
-#
-# That is, the name of the field, followed by spaces or tabs, followed by
-# field value. No trailing spaces.
-#
-# Here are the fields:
-
-##NAME: LOCATION:1
-#
-# Location of your LDAP server(s). If you have multiple LDAP servers,
-# you can list them separated by commas and spaces, and they will be tried in
-# turn.
-
-LDAP_URI ldaps://ldap.example.com, ldaps://backup.example.com
-
-##NAME: LDAP_PROTOCOL_VERSION:0
-#
-# Which version of LDAP protocol to use
-
-LDAP_PROTOCOL_VERSION 3
-
-##NAME: LDAP_BASEDN:0
-#
-# Look for authentication here:
-
-LDAP_BASEDN o=example, c=com
-
-##NAME: LDAP_BINDDN:0
-#
-# You may or may not need to specify the following. Because you've got
-# a password here, authldaprc should not be world-readable!!!
-
-LDAP_BINDDN cn=administrator, o=example, c=com
-LDAP_BINDPW toto
-
-##NAME: LDAP_TIMEOUT:0
-#
-# Timeout for LDAP search and connection
-
-LDAP_TIMEOUT 5
-
-##NAME: LDAP_AUTHBIND:0
-#
-# Define this to have the ldap server authenticate passwords. If LDAP_AUTHBIND
-# the password is validated by rebinding with the supplied userid and password.
-# If rebind succeeds, this is considered to be an authenticated request. This
-# does not support CRAM-MD5 authentication, which requires clearPassword.
-# Additionally, if LDAP_AUTHBIND is 1 then password changes are done under
-# the credentials of the user themselves, not LDAP_BINDDN/BINDPW
-#
-# LDAP_AUTHBIND 1
-
-##NAME: LDAP_MAIL:0
-#
-# Here's the field on which we query
-
-LDAP_MAIL mail
-
-##NAME: LDAP_FILTER:0
-#
-# This LDAP filter will be ANDed with the query for the field defined above
-# in LDAP_MAIL. So if you are querying for mail, and you have LDAP_FILTER
-# defined to be "(objectClass=CourierMailAccount)" the query that is performed
-# will be "(&(objectClass=CourierMailAccount)(mail=<someAccount>))"
-#
-# LDAP_FILTER (objectClass=CourierMailAccount)
-
-##NAME: LDAP_DOMAIN:0
-#
-# The following default domain will be appended, if not explicitly specified.
-#
-# LDAP_DOMAIN example.com
-
-##NAME: LDAP_GLOB_IDS:0
-#
-# The following two variables can be used to set everybody's uid and gid.
-# This is convenient if your LDAP specifies a bunch of virtual mail accounts
-# The values can be usernames or userids:
-#
-# LDAP_GLOB_UID vmail
-# LDAP_GLOB_GID vmail
-
-##NAME: LDAP_HOMEDIR:0
-#
-# We will retrieve the following attributes
-#
-# The HOMEDIR attribute MUST exist, and we MUST be able to chdir to it
-
-LDAP_HOMEDIR homeDirectory
-
-##NAME: LDAP_MAILROOT:0
-#
-# If homeDirectory is not an absolute path, define the root of the
-# relative paths in LDAP_MAILROOT
-#
-# LDAP_MAILROOT /var/mail
-
-
-##NAME: LDAP_MAILDIR:0
-#
-# The MAILDIR attribute is OPTIONAL, and specifies the location of the
-# mail directory. If not specified, ./Maildir will be used
-
-LDAP_MAILDIR mailbox
-
-##NAME: LDAP_DEFAULTDELIVERY:0
-#
-# Courier mail server only: optional attribute specifies custom mail delivery
-# instructions for this account (if defined) -- essentially overrides
-# DEFAULTDELIVERY from ${sysconfdir}/courierd
-
-LDAP_DEFAULTDELIVERY defaultDelivery
-
-##NAME: LDAP_MAILDIRQUOTA:0
-#
-# The following variable, if defined, specifies the field containing the
-# maildir quota, see README.maildirquota for more information
-#
-# LDAP_MAILDIRQUOTA quota
-
-
-##NAME: LDAP_FULLNAME:0
-#
-# FULLNAME is optional, specifies the user's full name
-
-LDAP_FULLNAME cn
-
-##NAME: LDAP_PW:0
-#
-# CLEARPW is the clear text password. CRYPT is the crypted password.
-# ONE OF THESE TWO ATTRIBUTES IS REQUIRED. If CLEARPW is provided, and
-# libhmac.a is available, CRAM authentication will be possible!
-
-LDAP_CLEARPW clearPassword
-LDAP_CRYPTPW userPassword
-
-##NAME: LDAP_IDS:0
-#
-# Uncomment the following, and modify as appropriate, if your LDAP database
-# stores individual userids and groupids. Otherwise, you must uncomment
-# LDAP_GLOB_UID and LDAP_GLOB_GID above. LDAP_GLOB_UID and LDAP_GLOB_GID
-# specify a uid/gid for everyone. Otherwise, LDAP_UID and LDAP_GID must
-# be defined as attributes for everyone.
-#
-# LDAP_UID uidNumber
-# LDAP_GID gidNumber
-
-
-##NAME: LDAP_AUXOPTIONS:0
-#
-# Auxiliary options. The LDAP_AUXOPTIONS setting should contain a list of
-# comma-separated "ATTRIBUTE=NAME" pairs. These names are additional
-# attributes that define various per-account "options", as given in
-# INSTALL's description of the OPTIONS setting.
-#
-# Each ATTRIBUTE specifies an LDAP attribute name. If it is present,
-# the attribute value gets placed in the OPTIONS variable, with the name
-# NAME. For example:
-#
-# LDAP_AUXOPTIONS shared=sharedgroup,disableimap=disableimap
-#
-# Then, if an LDAP record contains the following attributes:
-#
-# shared: domain1
-# disableimap: 0
-#
-# Then authldap will initialize OPTIONS to "sharedgroup=domain1,disableimap=0"
-#
-# NOTE: ** no spaces in this setting **, the above example has exactly
-# one tab character after LDAP_AUXOPTIONS
-
-
-##NAME: LDAP_ENUMERATE_FILTER:0
-#
-# {EXPERIMENTAL}
-# Optional custom filter used when enumerating accounts for authenumerate,
-# in order to compile a list of accounts for shared folders. If present,
-# this filter will be used instead of LDAP_FILTER.
-#
-# LDAP_ENUMERATE_FILTER (&(objectClass=CourierMailAccount)(!(disableshared=1)))
-
-
-##NAME: LDAP_DEREF:0
-#
-# Determines how aliases are handled during a search. This option is available
-# only with OpenLDAP 2.0
-#
-# LDAP_DEREF can be one of the following values:
-# never, searching, finding, always. If not specified, aliases are
-# never dereferenced.
-
-LDAP_DEREF never
-
-##NAME: LDAP_TLS:0
-#
-# Set LDAP_TLS to 1 to use the Start TLS extension (RFC 2830). This is
-# when the server accepts a normal LDAP connection on port 389 which
-# the client then requests 'upgrading' to TLS, and is equivalent to the
-# -ZZ flag to ldapsearch. If you are using an ldaps:// URI then do not
-# set this option.
-#
-# For additional LDAP-related options, see the authdaemonrc config file.
-
-LDAP_TLS 0
-
-##NAME: LDAP_EMAILMAP:0
-#
-# The following optional settings, if enabled, result in an extra LDAP
-# lookup to first locate a handle for an E-mail address, then a second lookup
-# on that handle to get the actual authentication record. You'll need
-# to uncomment these settings to enable an email handle lookup.
-#
-# The E-mail address must be of the form user@@realm, and this is plugged
-# into the following search string. "@@user@@" and "@@realm@@" are placeholders
-# for the user and the realm portions of the login ID.
-#
-# LDAP_EMAILMAP (&(userid=@@user@@)(realm=@@realm@@))
-
-##NAME: LDAP_EMAILMAP_BASEDN:0
-#
-# Specify the basedn for the email lookup. The default is LDAP_BASEDN.
-#
-# LDAP_EMAILMAP_BASEDN o=emailmap, c=com
-
-
-##NAME: LDAP_EMAILMAP_ATTRIBUTE:0
-#
-# The attribute which holds the handle. The contents of this attribute
-# are then plugged into the regular authentication lookup, and you must set
-# LDAP_EMAILMAP_MAIL to the name of this attribute in the authentication
-# records (which may be the same as LDAP_MAIL).
-# You MUST also leave LDAP_DOMAIN undefined. This enables authenticating
-# by handles only.
-#
-# Here's an example:
-#
-# dn: userid=john, realm=example.com, o=emailmap, c=com # LDAP_EMAILMAP_BASEDN
-# userid: john # LDAP_EMAILMAP search
-# realm: example.com # LDAP_EMAILMAP search
-# handle: cc223344 # LDAP_EMAILMAP_ATTRIBUTE
-#
-#
-# dn: controlHandle=cc223344, o=example, c=com # LDAP_BASEDN
-# controlHandle: cc223344 # LDAP_EMAILMAP_MAIL set to "controlHandle"
-# uid: ...
-# gid: ...
-# [ etc... ]
-#
-# LDAP_EMAILMAP_ATTRIBUTE handle
-
-##NAME: LDAP_EMAILMAP_MAIL:0
-#
-# After reading LDAP_EMAIL_ATTRIBUTE, the second query will go against
-# LDAP_BASEDN, but will key against LDAP_EMAILMAP_MAIL instead of LDAP_MAIL.
-#
-# LDAP_EMAILMAP_MAIL mail
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.22.01.39; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
-#
-# Copyright 2000-2007 Double Precision, Inc. See COPYING for
-# distribution information.
-#
-# Do not alter lines that begin with ##, they are used when upgrading
-# this configuration.
-#
-# authmysqlrc created from authmysqlrc.dist by sysconftool
-#
-# DO NOT INSTALL THIS FILE with world read permissions. This file
-# might contain the MySQL admin password!
-#
-# Each line in this file must follow the following format:
-#
-# field[spaces|tabs]value
-#
-# That is, the name of the field, followed by spaces or tabs, followed by
-# field value. Trailing spaces are prohibited.
-
-
-##NAME: LOCATION:0
-#
-# The server name, userid, and password used to log in.
-
-MYSQL_SERVER mysql.example.com
-MYSQL_USERNAME admin
-MYSQL_PASSWORD admin
-
-##NAME: SSLINFO:0
-#
-# The SSL information.
-#
-# To use SSL-encrypted connections, define the following variables (available
-# in MySQL 4.0, or higher):
-#
-#
-# MYSQL_SSL_KEY /path/to/file
-# MYSQL_SSL_CERT /path/to/file
-# MYSQL_SSL_CACERT /path/to/file
-# MYSQL_SSL_CAPATH /path/to/file
-# MYSQL_SSL_CIPHERS ALL:!DES
-
-##NAME: MYSQL_SOCKET:0
-#
-# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the
-# filesystem pipe used for the connection
-#
-# MYSQL_SOCKET /var/mysql/mysql.sock
-
-##NAME: MYSQL_PORT:0
-#
-# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to
-# connect to.
-
-MYSQL_PORT 0
-
-##NAME: MYSQL_OPT:0
-#
-# Leave MYSQL_OPT as 0, unless you know what you're doing.
-
-MYSQL_OPT 0
-
-##NAME: MYSQL_DATABASE:0
-#
-# The name of the MySQL database we will open:
-
-MYSQL_DATABASE mysql
-
-#NAME: MYSQL_CHARACTER_SET:0
-#
-# This is optional. MYSQL_CHARACTER_SET installs a character set. This option
-# can be used with MySQL version 4.1 or later. MySQL supports 70+ collations
-# for 30+ character sets. See MySQL documentations for more detalis.
-#
-# MYSQL_CHARACTER_SET latin1
-
-##NAME: MYSQL_USER_TABLE:0
-#
-# The name of the table containing your user data. See README.authmysqlrc
-# for the required fields in this table.
-
-MYSQL_USER_TABLE passwd
-
-##NAME: MYSQL_CRYPT_PWFIELD:0
-#
-# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined. Both
-# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext
-# passwords go into MYSQL_CLEAR_PWFIELD. Cleartext passwords allow
-# CRAM-MD5 authentication to be implemented.
-
-MYSQL_CRYPT_PWFIELD crypt
-
-##NAME: MYSQL_CLEAR_PWFIELD:0
-#
-#
-# MYSQL_CLEAR_PWFIELD clear
-
-##NAME: MYSQL_DEFAULT_DOMAIN:0
-#
-# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
-# we will look up 'user@@DEFAULT_DOMAIN' instead.
-#
-#
-# DEFAULT_DOMAIN example.com
-
-##NAME: MYSQL_UID_FIELD:0
-#
-# Other fields in the mysql table:
-#
-# MYSQL_UID_FIELD - contains the numerical userid of the account
-#
-MYSQL_UID_FIELD uid
-
-##NAME: MYSQL_GID_FIELD:0
-#
-# Numerical groupid of the account
-
-MYSQL_GID_FIELD gid
-
-##NAME: MYSQL_LOGIN_FIELD:0
-#
-# The login id, default is id. Basically the query is:
-#
-# SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid'
-#
-
-MYSQL_LOGIN_FIELD id
-
-##NAME: MYSQL_HOME_FIELD:0
-#
-
-MYSQL_HOME_FIELD home
-
-##NAME: MYSQL_NAME_FIELD:0
-#
-# The user's name (optional)
-
-MYSQL_NAME_FIELD name
-
-##NAME: MYSQL_MAILDIR_FIELD:0
-#
-# This is an optional field, and can be used to specify an arbitrary
-# location of the maildir for the account, which normally defaults to
-# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD).
-#
-# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this
-# out.
-#
-# MYSQL_MAILDIR_FIELD maildir
-
-##NAME: MYSQL_DEFAULTDELIVERY:0
-#
-# Courier mail server only: optional field specifies custom mail delivery
-# instructions for this account (if defined) -- essentially overrides
-# DEFAULTDELIVERY from ${sysconfdir}/courierd
-#
-# MYSQL_DEFAULTDELIVERY defaultdelivery
-
-##NAME: MYSQL_QUOTA_FIELD:0
-#
-# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally
-# specify a maildir quota. See README.maildirquota for more information
-#
-# MYSQL_QUOTA_FIELD quota
-
-##NAME: MYSQL_AUXOPTIONS:0
-#
-# Auxiliary options. The MYSQL_AUXOPTIONS field should be a char field that
-# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
-# pairs. These names are additional attributes that define various per-account
-# "options", as given in INSTALL's description of the "Account OPTIONS"
-# setting.
-#
-# MYSQL_AUXOPTIONS_FIELD auxoptions
-#
-# You might want to try something like this, if you'd like to use a bunch
-# of individual fields, instead of a single text blob:
-#
-# MYSQL_AUXOPTIONS_FIELD CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup)
-#
-# This will let you define fields called "disableimap", etc, with the end result
-# being something that the OPTIONS parser understands.
-
-
-##NAME: MYSQL_WHERE_CLAUSE:0
-#
-# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary
-# fixed string that is appended to the WHERE clause of our query
-#
-# MYSQL_WHERE_CLAUSE server='mailhost.example.com'
-
-##NAME: MYSQL_SELECT_CLAUSE:0
-#
-# (EXPERIMENTAL)
-# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database,
-# which is structuraly different from proposed. The fixed string will
-# be used to do a SELECT operation on database, which should return fields
-# in order specified bellow:
-#
-# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
-#
-# The username field should include the domain (see example below).
-#
-# Enabling this option causes ignorance of any other field-related
-# options, excluding default domain.
-#
-# There are two variables, which you can use. Substitution will be made
-# for them, so you can put entered username (local part) and domain name
-# in the right place of your query. These variables are:
-# $(local_part), $(domain), $(service)
-#
-# If a $(domain) is empty (not given by the remote user) the default domain
-# name is used in its place.
-#
-# $(service) will expand out to the service being authenticated: imap, imaps,
-# pop3 or pop3s. Courier mail server only: service will also expand out to
-# "courier", when searching for local mail account's location. In this case,
-# if the "maildir" field is not empty it will be used in place of
-# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
-# authenticated ESMTP.
-#
-# This example is a little bit modified adaptation of vmail-sql
-# database scheme:
-#
-# MYSQL_SELECT_CLAUSE SELECT CONCAT(popbox.local_part, '@@', popbox.domain_name), \
-# CONCAT('{MD5}', popbox.password_hash), \
-# popbox.clearpw, \
-# domain.uid, \
-# domain.gid, \
-# CONCAT(domain.path, '/', popbox.mbox_name), \
-# '', \
-# domain.quota, \
-# '', \
-# CONCAT("disableimap=",disableimap,",disablepop3=", \
-# disablepop3,",disablewebmail=",disablewebmail, \
-# ",sharedgroup=",sharedgroup) \
-# FROM popbox, domain \
-# WHERE popbox.local_part = '$(local_part)' \
-# AND popbox.domain_name = '$(domain)' \
-# AND popbox.domain_name = domain.domain_name
-
-
-##NAME: MYSQL_ENUMERATE_CLAUSE:1
-#
-# {EXPERIMENTAL}
-# Optional custom SQL query used to enumerate accounts for authenumerate,
-# in order to compile a list of accounts for shared folders. The query
-# should return the following fields: name, uid, gid, homedir, maildir, options
-#
-# Example:
-# MYSQL_ENUMERATE_CLAUSE SELECT CONCAT(popbox.local_part, '@@', popbox.domain_name), \
-# domain.uid, \
-# domain.gid, \
-# CONCAT(domain.path, '/', popbox.mbox_name), \
-# '', \
-# CONCAT('sharedgroup=', sharedgroup) \
-# FROM popbox, domain \
-# WHERE popbox.local_part = '$(local_part)' \
-# AND popbox.domain_name = '$(domain)' \
-# AND popbox.domain_name = domain.domain_name
-
-
-
-##NAME: MYSQL_CHPASS_CLAUSE:0
-#
-# (EXPERIMENTAL)
-# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database,
-# which is structuraly different from proposed. The fixed string will
-# be used to do an UPDATE operation on database. In other words, it is
-# used, when changing password.
-#
-# There are four variables, which you can use. Substitution will be made
-# for them, so you can put entered username (local part) and domain name
-# in the right place of your query. There variables are:
-# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
-#
-# If a $(domain) is empty (not given by the remote user) the default domain
-# name is used in its place.
-# $(newpass) contains plain password
-# $(newpass_crypt) contains its crypted form
-#
-# MYSQL_CHPASS_CLAUSE UPDATE popbox \
-# SET clearpw='$(newpass)', \
-# password_hash='$(newpass_crypt)' \
-# WHERE local_part='$(local_part)' \
-# AND domain_name='$(domain)'
-#
-@
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
-# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe
+# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe
-#authmodulelist="authmysql authldap authpam authuserdb authshadow authcustom authpipe"
-#authmodulelist="authpam authuserdb authshadow authcustom authpipe"
authmodulelist="authmysql authpam"
##NAME: authmodulelistorig:3
# This setting is used by Courier's webadmin module, and should be left
# alone
-authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe"
+authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
##NAME: daemons:0
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
-# can use are: authuserdb authpam authshadow authldap authmysql authcustom authpipe
+# can use are: authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe
-authmodulelist="authuserdb authpam authshadow authldap authmysql authcustom authpipe"
+authmodulelist="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
##NAME: authmodulelistorig:3
#
# This setting is used by Courier's webadmin module, and should be left
# alone
-authmodulelistorig="authuserdb authpam authshadow authldap authmysql authcustom authpipe"
+authmodulelistorig="authuserdb authpam authshadow authpgsql authldap authmysql authcustom authpipe"
##NAME: daemons:0
#
--- /dev/null
+##VERSION: $Id: authpgsqlrc,v 1.13 2008/12/18 12:08:25 mrsam Exp $
+#
+# Copyright 2000-2004 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# authpgsqlrc created from authpgsqlrc.dist by sysconftool
+#
+# DO NOT INSTALL THIS FILE with world read permissions. This file
+# might contain the PostgreSQL admin password!
+#
+# Each line in this file must follow the following format:
+#
+# field[spaces|tabs]value
+#
+# That is, the name of the field, followed by spaces or tabs, followed by
+# field value. Trailing spaces are prohibited.
+
+
+##NAME: LOCATION:0
+#
+# The server hostname, port, userid, and password used to log in.
+#
+# To connect to a filesystem socket, delete PGSQL_HOST, and set PGSQL_PORT to
+# the socket's last component. So, if your pg socket is /tmp/.s.PGSQL.5400
+# set PGSQL_PORT to 5400.
+
+PGSQL_HOST pgsql.example.com
+PGSQL_PORT 5400
+PGSQL_USERNAME admin
+PGSQL_PASSWORD admin
+
+
+##NAME: PGSQL_OPT:0
+#
+# PGSQL_OPT specifies the connection debug options to PQsetdbLogin().
+# Don't bother with this setting unless you know what you're doing
+#
+# PGSQL_OPT
+
+##NAME: PGSQL_DATABASE:0
+#
+# The name of the PostgreSQL database we will open:
+
+PGSQL_DATABASE template1
+
+##NAME: PGSQL_CHARACTER_SET:0
+#
+# Optionally install a character set mapping. Restart authdaemond, send a test
+# query using authtest and check for error messages in syslog/maillog.
+#
+# PGSQL_CHARACTER_SET UTF8
+
+##NAME: PGSQL_USER_TABLE:0
+#
+# The name of the table containing your user data. See README.authmysqlrc
+# for the required fields in this table (both MySQL and Postgress use the
+# same suggested layout.
+
+PGSQL_USER_TABLE passwd
+
+##NAME: PGSQL_CRYPT_PWFIELD:0
+#
+# Either PGSQL_CRYPT_PWFIELD or PGSQL_CLEAR_PWFIELD must be defined. Both
+# are OK too. crypted passwords go into PGSQL_CRYPT_PWFIELD, cleartext
+# passwords go into PGSQL_CLEAR_PWFIELD. Cleartext passwords allow
+# CRAM-MD5 authentication to be implemented.
+
+PGSQL_CRYPT_PWFIELD crypt
+
+##NAME: PGSQL_CLEAR_PWFIELD:0
+#
+#
+# PGSQL_CLEAR_PWFIELD clear
+
+##NAME: PGSQL_DEFAULT_DOMAIN:0
+#
+# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
+# we will look up 'user@DEFAULT_DOMAIN' instead.
+#
+#
+# DEFAULT_DOMAIN example.com
+
+##NAME: PGSQL_UID_FIELD:0
+#
+# Other fields in the mysql table:
+#
+# PGSQL_UID_FIELD - contains the numerical userid of the account
+#
+PGSQL_UID_FIELD uid
+
+##NAME: PGSQL_GID_FIELD:0
+#
+# Numerical groupid of the account
+
+PGSQL_GID_FIELD gid
+
+##NAME: PGSQL_LOGIN_FIELD:0
+#
+# The login id, default is id. Basically the query is:
+#
+# SELECT PGSQL_UID_FIELD, PGSQL_GID_FIELD, ... WHERE id='loginid'
+#
+
+PGSQL_LOGIN_FIELD id
+
+##NAME: PGSQL_HOME_FIELD:0
+#
+
+PGSQL_HOME_FIELD home
+
+##NAME: PGSQL_NAME_FIELD:0
+#
+# The user's name (optional)
+
+PGSQL_NAME_FIELD name
+
+##NAME: PGSQL_MAILDIR_FIELD:0
+#
+# This is an optional field, and can be used to specify an arbitrary
+# location of the maildir for the account, which normally defaults to
+# $HOME/Maildir (where $HOME is read from PGSQL_HOME_FIELD).
+#
+# You still need to provide a PGSQL_HOME_FIELD, even if you uncomment this
+# out.
+#
+# PGSQL_MAILDIR_FIELD maildir
+
+##NAME: PGSQL_DEFAULTDELIVERY:0
+#
+# Courier mail server only: optional field specifies custom mail delivery
+# instructions for this account (if defined) -- essentially overrides
+# DEFAULTDELIVERY from ${sysconfdir}/courierd
+#
+# PGSQL_DEFAULTDELIVERY defaultDelivery
+
+##NAME: PGSQL_QUOTA_FIELD:0
+#
+# Define PGSQL_QUOTA_FIELD to be the name of the field that can optionally
+# specify a maildir quota. See README.maildirquota for more information
+#
+# PGSQL_QUOTA_FIELD quota
+
+##NAME: PGSQL_AUXOPTIONS:0
+#
+# Auxiliary options. The PGSQL_AUXOPTIONS field should be a char field that
+# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
+# pairs. These names are additional attributes that define various per-account
+# "options", as given in INSTALL's description of the "Account OPTIONS"
+# setting.
+#
+# PGSQL_AUXOPTIONS_FIELD auxoptions
+#
+# You might want to try something like this, if you'd like to use a bunch
+# of individual fields, instead of a single text blob:
+#
+# PGSQL_AUXOPTIONS_FIELD 'disableimap=' || disableimap || ',disablepop3=' || disablepop3 || ',disablewebmail=' || disablewebmail || ',sharedgroup=' || sharedgroup
+#
+# This will let you define fields called "disableimap", etc, with the end result
+# being something that the OPTIONS parser understands.
+
+##NAME: PGSQL_WHERE_CLAUSE:0
+#
+# This is optional, PGSQL_WHERE_CLAUSE can be basically set to an arbitrary
+# fixed string that is appended to the WHERE clause of our query
+#
+# PGSQL_WHERE_CLAUSE server='mailhost.example.com'
+
+##NAME: PGSQL_SELECT_CLAUSE:0
+#
+# (EXPERIMENTAL)
+# This is optional, PGSQL_SELECT_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do a SELECT operation on database, which should return fields
+# in order specified bellow:
+#
+# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
+#
+# Enabling this option causes ignorance of any other field-related
+# options, excluding default domain.
+#
+# There are two variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. These variables are:
+# $(local_part), $(domain), and $(service)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+#
+# $(service) will expand out to the service being authenticated: imap, imaps,
+# pop3 or pop3s. Courier mail server only: service will also expand out to
+# "courier", when searching for local mail account's location. In this case,
+# if the "maildir" field is not empty it will be used in place of
+# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
+# authenticated ESMTP.
+#
+# This example is a little bit modified adaptation of vmail-sql
+# database scheme:
+#
+# PGSQL_SELECT_CLAUSE SELECT popbox.local_part, \
+# '{MD5}' || popbox.password_hash, \
+# popbox.clearpw, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name), \
+# '', \
+# domain.quota, \
+# '', \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: PGSQL_ENUMERATE_CLAUSE:1
+#
+# {EXPERIMENTAL}
+# Optional custom SQL query used to enumerate accounts for authenumerate,
+# in order to compile a list of accounts for shared folders. The query
+# should return the following fields: name, uid, gid, homedir, maildir, options
+#
+# Example:
+# PGSQL_ENUMERATE_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# 'sharedgroup=' || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: PGSQL_CHPASS_CLAUSE:0
+#
+# (EXPERIMENTAL)
+# This is optional, PGSQL_CHPASS_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do an UPDATE operation on database. In other words, it is
+# used, when changing password.
+#
+# There are four variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. There variables are:
+# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+# $(newpass) contains plain password
+# $(newpass_crypt) contains its crypted form
+#
+# PGSQL_CHPASS_CLAUSE UPDATE popbox \
+# SET clearpw='$(newpass)', \
+# password_hash='$(newpass_crypt)' \
+# WHERE local_part='$(local_part)' \
+# AND domain_name='$(domain)'
+#
--- /dev/null
+##VERSION: $Id: authpgsqlrc,v 1.13 2008/12/18 12:08:25 mrsam Exp $
+#
+# Copyright 2000-2004 Double Precision, Inc. See COPYING for
+# distribution information.
+#
+# Do not alter lines that begin with ##, they are used when upgrading
+# this configuration.
+#
+# authpgsqlrc created from authpgsqlrc.dist by sysconftool
+#
+# DO NOT INSTALL THIS FILE with world read permissions. This file
+# might contain the PostgreSQL admin password!
+#
+# Each line in this file must follow the following format:
+#
+# field[spaces|tabs]value
+#
+# That is, the name of the field, followed by spaces or tabs, followed by
+# field value. Trailing spaces are prohibited.
+
+
+##NAME: LOCATION:0
+#
+# The server hostname, port, userid, and password used to log in.
+#
+# To connect to a filesystem socket, delete PGSQL_HOST, and set PGSQL_PORT to
+# the socket's last component. So, if your pg socket is /tmp/.s.PGSQL.5400
+# set PGSQL_PORT to 5400.
+
+PGSQL_HOST pgsql.example.com
+PGSQL_PORT 5400
+PGSQL_USERNAME admin
+PGSQL_PASSWORD admin
+
+
+##NAME: PGSQL_OPT:0
+#
+# PGSQL_OPT specifies the connection debug options to PQsetdbLogin().
+# Don't bother with this setting unless you know what you're doing
+#
+# PGSQL_OPT
+
+##NAME: PGSQL_DATABASE:0
+#
+# The name of the PostgreSQL database we will open:
+
+PGSQL_DATABASE template1
+
+##NAME: PGSQL_CHARACTER_SET:0
+#
+# Optionally install a character set mapping. Restart authdaemond, send a test
+# query using authtest and check for error messages in syslog/maillog.
+#
+# PGSQL_CHARACTER_SET UTF8
+
+##NAME: PGSQL_USER_TABLE:0
+#
+# The name of the table containing your user data. See README.authmysqlrc
+# for the required fields in this table (both MySQL and Postgress use the
+# same suggested layout.
+
+PGSQL_USER_TABLE passwd
+
+##NAME: PGSQL_CRYPT_PWFIELD:0
+#
+# Either PGSQL_CRYPT_PWFIELD or PGSQL_CLEAR_PWFIELD must be defined. Both
+# are OK too. crypted passwords go into PGSQL_CRYPT_PWFIELD, cleartext
+# passwords go into PGSQL_CLEAR_PWFIELD. Cleartext passwords allow
+# CRAM-MD5 authentication to be implemented.
+
+PGSQL_CRYPT_PWFIELD crypt
+
+##NAME: PGSQL_CLEAR_PWFIELD:0
+#
+#
+# PGSQL_CLEAR_PWFIELD clear
+
+##NAME: PGSQL_DEFAULT_DOMAIN:0
+#
+# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
+# we will look up 'user@DEFAULT_DOMAIN' instead.
+#
+#
+# DEFAULT_DOMAIN example.com
+
+##NAME: PGSQL_UID_FIELD:0
+#
+# Other fields in the mysql table:
+#
+# PGSQL_UID_FIELD - contains the numerical userid of the account
+#
+PGSQL_UID_FIELD uid
+
+##NAME: PGSQL_GID_FIELD:0
+#
+# Numerical groupid of the account
+
+PGSQL_GID_FIELD gid
+
+##NAME: PGSQL_LOGIN_FIELD:0
+#
+# The login id, default is id. Basically the query is:
+#
+# SELECT PGSQL_UID_FIELD, PGSQL_GID_FIELD, ... WHERE id='loginid'
+#
+
+PGSQL_LOGIN_FIELD id
+
+##NAME: PGSQL_HOME_FIELD:0
+#
+
+PGSQL_HOME_FIELD home
+
+##NAME: PGSQL_NAME_FIELD:0
+#
+# The user's name (optional)
+
+PGSQL_NAME_FIELD name
+
+##NAME: PGSQL_MAILDIR_FIELD:0
+#
+# This is an optional field, and can be used to specify an arbitrary
+# location of the maildir for the account, which normally defaults to
+# $HOME/Maildir (where $HOME is read from PGSQL_HOME_FIELD).
+#
+# You still need to provide a PGSQL_HOME_FIELD, even if you uncomment this
+# out.
+#
+# PGSQL_MAILDIR_FIELD maildir
+
+##NAME: PGSQL_DEFAULTDELIVERY:0
+#
+# Courier mail server only: optional field specifies custom mail delivery
+# instructions for this account (if defined) -- essentially overrides
+# DEFAULTDELIVERY from ${sysconfdir}/courierd
+#
+# PGSQL_DEFAULTDELIVERY defaultDelivery
+
+##NAME: PGSQL_QUOTA_FIELD:0
+#
+# Define PGSQL_QUOTA_FIELD to be the name of the field that can optionally
+# specify a maildir quota. See README.maildirquota for more information
+#
+# PGSQL_QUOTA_FIELD quota
+
+##NAME: PGSQL_AUXOPTIONS:0
+#
+# Auxiliary options. The PGSQL_AUXOPTIONS field should be a char field that
+# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
+# pairs. These names are additional attributes that define various per-account
+# "options", as given in INSTALL's description of the "Account OPTIONS"
+# setting.
+#
+# PGSQL_AUXOPTIONS_FIELD auxoptions
+#
+# You might want to try something like this, if you'd like to use a bunch
+# of individual fields, instead of a single text blob:
+#
+# PGSQL_AUXOPTIONS_FIELD 'disableimap=' || disableimap || ',disablepop3=' || disablepop3 || ',disablewebmail=' || disablewebmail || ',sharedgroup=' || sharedgroup
+#
+# This will let you define fields called "disableimap", etc, with the end result
+# being something that the OPTIONS parser understands.
+
+##NAME: PGSQL_WHERE_CLAUSE:0
+#
+# This is optional, PGSQL_WHERE_CLAUSE can be basically set to an arbitrary
+# fixed string that is appended to the WHERE clause of our query
+#
+# PGSQL_WHERE_CLAUSE server='mailhost.example.com'
+
+##NAME: PGSQL_SELECT_CLAUSE:0
+#
+# (EXPERIMENTAL)
+# This is optional, PGSQL_SELECT_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do a SELECT operation on database, which should return fields
+# in order specified bellow:
+#
+# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
+#
+# Enabling this option causes ignorance of any other field-related
+# options, excluding default domain.
+#
+# There are two variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. These variables are:
+# $(local_part), $(domain), and $(service)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+#
+# $(service) will expand out to the service being authenticated: imap, imaps,
+# pop3 or pop3s. Courier mail server only: service will also expand out to
+# "courier", when searching for local mail account's location. In this case,
+# if the "maildir" field is not empty it will be used in place of
+# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
+# authenticated ESMTP.
+#
+# This example is a little bit modified adaptation of vmail-sql
+# database scheme:
+#
+# PGSQL_SELECT_CLAUSE SELECT popbox.local_part, \
+# '{MD5}' || popbox.password_hash, \
+# popbox.clearpw, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name), \
+# '', \
+# domain.quota, \
+# '', \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: PGSQL_ENUMERATE_CLAUSE:1
+#
+# {EXPERIMENTAL}
+# Optional custom SQL query used to enumerate accounts for authenumerate,
+# in order to compile a list of accounts for shared folders. The query
+# should return the following fields: name, uid, gid, homedir, maildir, options
+#
+# Example:
+# PGSQL_ENUMERATE_CLAUSE SELECT popbox.local_part || '@' || popbox.domain_name, \
+# domain.uid, \
+# domain.gid, \
+# domain.path || '/' || popbox.mbox_name, \
+# '', \
+# 'sharedgroup=' || sharedgroup \
+# FROM popbox, domain \
+# WHERE popbox.local_part = '$(local_part)' \
+# AND popbox.domain_name = '$(domain)' \
+# AND popbox.domain_name = domain.domain_name
+
+
+##NAME: PGSQL_CHPASS_CLAUSE:0
+#
+# (EXPERIMENTAL)
+# This is optional, PGSQL_CHPASS_CLAUSE can be set when you have a database,
+# which is structuraly different from proposed. The fixed string will
+# be used to do an UPDATE operation on database. In other words, it is
+# used, when changing password.
+#
+# There are four variables, which you can use. Substitution will be made
+# for them, so you can put entered username (local part) and domain name
+# in the right place of your query. There variables are:
+# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
+#
+# If a $(domain) is empty (not given by the remote user) the default domain
+# name is used in its place.
+# $(newpass) contains plain password
+# $(newpass_crypt) contains its crypted form
+#
+# PGSQL_CHPASS_CLAUSE UPDATE popbox \
+# SET clearpw='$(newpass)', \
+# password_hash='$(newpass_crypt)' \
+# WHERE local_part='$(local_part)' \
+# AND domain_name='$(domain)'
+#
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.12.02.12.05.17; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@#!/bin/sh
-
-#test -x /usr/sbin/logrotate || exit 0
-#/usr/sbin/logrotate /etc/logrotate.conf
-
-if [ -x /usr/scripts/logrotate.pl ] ; then
- /usr/scripts/logrotate.pl >> /var/log/logrotate.log
-fi
-
-@
-#!/bin/sh
+#!/bin/bash
#test -x /usr/sbin/logrotate || exit 0
#/usr/sbin/logrotate /etc/logrotate.conf
if [ -x /usr/scripts/logrotate.pl ] ; then
- /usr/scripts/logrotate.pl >> /var/log/logrotate.log
+ /usr/scripts/logrotate.pl >> /var/log/logrotate.log
fi
setenv GSETTINGS_BACKEND 'gconf'
setenv GUILE_LOAD_PATH '/usr/share/guile/1.8'
setenv HG '/usr/bin/hg'
-setenv INFOPATH '/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info'
+setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/info'
setenv LESS '-R -M --shift 5'
setenv LESSOPEN '|lesspipe %s'
-setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/opt/cuda/man'
+setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
setenv PAGER '/usr/bin/less'
-setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin:/opt/cuda/bin'
-setenv PYTHONDOCS '/usr/share/doc/python-docs-2.7.1/html/library'
+setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin'
setenv PYTHONDOCS_2_7 '/usr/share/doc/python-docs-2.7.2/html/library'
setenv PYTHONDOCS_3_2 '/usr/share/doc/python-docs-3.2.2/html/library'
-setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin:/opt/cuda/bin'
+setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin'
setenv XDG_CONFIG_DIRS '/etc/xdg'
setenv XDG_DATA_DIRS '/usr/local/share:/usr/share'
#
-# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
-Browsing On
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS
# Default authentication type, when authentication is required...
DefaultAuthType Basic
+# Web interface setting...
+WebInterface Yes
+
# Restrict access to the server...
<Location />
Order allow,deny
# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Policy>
#
-# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
#
#
-# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
+# "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $"
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
-Browsing On
+# We switch this off by default in Gentoo, to avoid an unnecessary open port.
+Browsing Off
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS
# Default authentication type, when authentication is required...
DefaultAuthType Basic
+# Web interface setting...
+WebInterface Yes
+
# Restrict access to the server...
<Location />
Order allow,deny
# Set the default printer/job policies...
<Policy default>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
# Set the authenticated printer/job policies...
<Policy authenticated>
+ # Job/subscription privacy...
+ JobPrivateAccess default
+ JobPrivateValues default
+ SubscriptionPrivateAccess default
+ SubscriptionPrivateValues default
+
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
- <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
+ <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
- <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
+ <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Policy>
#
-# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
+# End of "$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $".
#
#
-# "$Id$"
+# "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $"
#
# Sample SNMP configuration file for CUPS. See "man cups-snmp.conf" for a
# complete description of this file.
Community public
#
-# End of "$Id$".
+# End of "$Id: snmp.conf.in 9045 2010-03-24 07:48:42Z mike $".
#
# the permissions of the directory containing the files (see
# archive-dir above).
# (yes or no)
-use-rcs=yes
+use-rcs=no
# Diff for display
# %s old file
# %s new file
# If using colordiff instead of diff, the less -R option may be required
# for correct display.
-#diff="diff -Nu '%s' '%s' | less --no-init --QUIT-AT-EOF"
-#diff="diff -Nu '%s' '%s' | colordiff | less -r --no-init --QUIT-AT-EOF"
-#diff="diff -Nu '%s' '%s'"
diff="diff -Nu '%s' '%s' | colordiff"
# Set the pager for use with diff commands (this will
PATH="/opt/bin"
ROOTPATH="/opt/bin"
-LDPATH="/usr/local/lib"
MANPATH="/usr/local/share/man:/usr/share/man"
INFOPATH="/usr/share/info"
CONFIG_PROTECT_MASK="/etc/gentoo-release"
+LDPATH='/lib64:/usr/lib64:/usr/local/lib64:/lib32:/usr/lib32:/usr/local/lib32:/lib:/usr/lib:/usr/local/lib'
--- /dev/null
+PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3"
+ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3"
+GCC_SPECS=""
+MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man"
+INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info"
+++ /dev/null
-LDPATH="/lib64:/usr/lib64:/usr/local/lib64:/lib32:/usr/lib32:/usr/local/lib32:/lib:/usr/lib:/usr/local/lib"
+++ /dev/null
-PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3"
-ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3"
-GCC_SPECS=""
-MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man"
-INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info"
--- /dev/null
+# Configuration file for eselect
+# This file has been automatically generated.
+LDPATH="/usr/lib/postgresql:/usr/lib64/postgresql:/usr/lib64/postgresql-9.1/lib64/"
+MANPATH="/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/"
+++ /dev/null
-PYTHONDOCS="/usr/share/doc/python-docs-2.7.1/html/library"
+++ /dev/null
-PATH=/opt/cuda/bin
-ROOTPATH=/opt/cuda/bin
-LDPATH=/opt/cuda/lib64
-MANPATH=/opt/cuda/man
+++ /dev/null
-PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.6"
-ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.6"
-GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.4.6"
-LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.6:/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.6/32"
-MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.6/man"
-INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.4.6/info"
-STDCXX_INCDIR="g++-v4"
-//usr/share/boost-eselect/profiles/1.46/default
\ No newline at end of file
+//usr/share/boost-eselect/profiles/1.48/default
\ No newline at end of file
--- /dev/null
+/usr/include/postgresql
+/usr/include/libpq-fe.h
+/usr/include/pg_config_manual.h
+/usr/include/libpq
+/usr/include/postgres_ext.h
+/usr/lib64/postgresql
+/usr/lib64/libpq.a
+/usr/lib64/libpq.so.5
+/usr/lib64/libpgtypes.so.3
+/usr/lib64/libecpg.a
+/usr/lib64/libpgport.a
+/usr/lib64/libecpg_compat.so.3.3
+/usr/lib64/libpgtypes.so
+/usr/lib64/libecpg.so
+/usr/lib64/libecpg_compat.so
+/usr/lib64/libecpg.so.6.3
+/usr/lib64/libpgtypes.a
+/usr/lib64/libpq.so
+/usr/lib64/libecpg_compat.a
+/usr/lib64/libpgtypes.so.3.2
+/usr/lib64/libecpg.so.6
+/usr/lib64/libpq.so.5.4
+/usr/lib64/libecpg_compat.so.3
+/usr/bin/dropdb
+/usr/bin/pg_restore
+/usr/bin/pg_config
+/usr/bin/pg_dump
+/usr/bin/psql
+/usr/bin/dropuser
+/usr/bin/pg_dumpall
+/usr/bin/ecpg
+/usr/bin/droplang
+/usr/bin/oid2name
+/usr/bin/vacuumlo
+/usr/bin/reindexdb
+/usr/bin/createuser
+/usr/bin/createlang
+/usr/bin/clusterdb
+/usr/bin/vacuumdb
+/usr/bin/createdb
+/usr/bin/pgbench
+/usr/share/postgresql
--- /dev/null
+/usr/bin/dropdb91
+/usr/bin/pg_restore91
+/usr/bin/pg_config91
+/usr/bin/pg_dump91
+/usr/bin/psql91
+/usr/bin/dropuser91
+/usr/bin/pg_dumpall91
+/usr/bin/ecpg91
+/usr/bin/droplang91
+/usr/bin/oid2name91
+/usr/bin/vacuumlo91
+/usr/bin/reindexdb91
+/usr/bin/createuser91
+/usr/bin/createlang91
+/usr/bin/clusterdb91
+/usr/bin/vacuumdb91
+/usr/bin/createdb91
+/usr/bin/pgbench91
--- /dev/null
+postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.4"
--- /dev/null
+postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.4"
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
-# needed; notail increases performance of ReiserFS (at the expense of storage
+# needed); notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# See the manpage fstab(5) for more information.
#
-# <fs> <mountpoint> <type> <opts> <dump/pass>
+# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
-/dev/md2 /boot ext3 noauto,noatime 0 0
-/dev/md3 / ext3 noatime,acl,user_xattr 0 1
+/dev/md0 /boot ext3 noauto,noatime 0 0
+/dev/md2 / ext3 noatime,acl,user_xattr 0 1
-/dev/md4 none swap sw 0 0
+/dev/sda2 none swap defaults 0 0
+/dev/sdb2 none swap defaults 0 0
/dev/vg0/tmp /tmp ext4 noatime 0 0
-/dev/vg0/usr /usr ext4 acl,user_xattr 0 0
-/dev/vg0/var /var ext4 acl,user_xattr 0 0
-/dev/vg0/opt /opt ext4 acl,user_xattr 0 0
-
-#/dev/vg0/home /home ext4 quota,grpquota,acl,user_xattr 0 0
-#/dev/vg0/home /home ext4 acl,user_xattr 0 0
-/dev/vg0/home /home ext4 acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 0
+/dev/vg0/home /home ext4 acl,user_xattr 0 0
/dev/vg0/var_tmp /var/tmp ext4 noatime 0 0
/dev/vg0/www /var/www ext4 acl,user_xattr 0 0
/dev/vg0/portage /usr/portage ext4 noatime 0 0
/dev/vg0/distfiles /usr/portage/distfiles ext4 noatime 0 0
-#/dev/vg0/sarah /var/sarah reiserfs ro,acl,user_xattr 0 0
-
+/dev/md1 /ubuntu ext3 ro,noatime,acl,user_xattr 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
+
--- /dev/null
+# Configuration file for genkernel
+# $Id: b39a952ab3df9371a15786986e417f187396a39c $
+
+# This file is sourced by genkernel at startup and determines which options
+# we will be using to compile our kernel. The order of precidence is simple,
+# with the internal settings being least important, configuration file
+# settings next, and command line options being most important.
+
+# =========Common Command Line Option Defaults=========
+
+# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
+# catalyst and stage building.
+#INSTALL="yes"
+
+# Run 'make oldconfig' before compiling this kernel?
+OLDCONFIG="yes"
+
+# Run 'make menuconfig' before compiling this kernel?
+MENUCONFIG="no"
+
+# Run 'make clean' before compilation?
+# If set to NO, implies MRPROPER WILL NOT be run
+# Also, if clean is NO, it won't copy over any configuration
+# file, it will use what's there.
+CLEAN="yes"
+
+# Run 'make mrproper' before configuration/compilation?
+MRPROPER="yes"
+
+# Override the arch detection?
+#ARCH_OVERRIDE="x86"
+
+# Mount BOOTDIR automatically if it isn't mounted?
+MOUNTBOOT="yes"
+
+# Make symlinks in BOOTDIR automatically?
+#SYMLINK="no"
+
+# Save the new configuration in /etc/kernels upon
+# successfull compilation
+SAVE_CONFIG="yes"
+
+# Use Color output in Genkernel?
+USECOLOR="yes"
+
+# Clear build cache dir
+#CLEAR_CACHE_DIR="yes"
+
+# Clear all tmp files and caches after genkernel has run
+#POSTCLEAR="1"
+
+# Genkernel uses an independent configuration for MAKEOPTS, and does not source
+# /etc/make.conf . You can override the default setting by uncommenting and
+# tweaking the following line. Default setting is set up by
+# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
+# argument is: <number of processors>*<number of cores per processor>+1
+#MAKEOPTS="-j2"
+
+# Add in LVM support from static binaries if they exist on the system, or
+# compile static LVM binaries if static ones do not exist.
+#LVM="no"
+
+# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
+#LUKS="no"
+
+# Add in GnuPG support
+#GPG="no"
+
+# Add DMRAID support.
+#DMRAID="no"
+
+# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
+# If included, busybox is rebuilt if the cached copy is out of date.
+#BUSYBOX="yes"
+
+# Includes mdadm/mdmon binaries in initramfs.
+# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
+#MDADM="no"
+
+# Specify a custom mdadm.conf.
+# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
+# arrays during bootup. Usually, this should not be needed.
+#MDADM_CONFIG="/etc/mdadm.conf"
+
+# Add Multipath support.
+#MULTIPATH="no"
+
+# Add iSCSI support.
+#ISCSI="no"
+
+# Include support for unionfs
+#UNIONFS="1"
+
+# Enable copying of firmware into initramfs
+#FIRMWARE="no"
+# Specify directory to pull from
+#FIRMWARE_DIR="/lib/firmware"
+# Specify specific firmware files to include. This overrides FIRMWARE_DIR
+#FIRMWARE_FILES=""
+
+# Enable disklabel support (copies blkid to initrd)
+DISKLABEL="yes"
+
+# Add new kernel to grub?
+#BOOTLOADER="grub"
+
+# Enable splashutils in early space (initrd). Default is "no".
+#SPLASH="yes"
+
+# Use this splash theme. If commented out - the "default" name theme is used.
+# Also, SPLASH="yes" needs to be enabled for this one to one work.
+# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
+#SPLASH_THEME="gentoo"
+
+
+# =========Keymap Settings=========
+#
+# Force keymap selection at boot
+#DOKEYMAPAUTO="yes"
+
+
+# Disables keymap selection support
+#KEYMAP="0"
+
+
+# =========Low Level Compile Settings=========
+#
+# GNU Make to use for kernel. See also the --kernel-make command line option.
+#KERNEL_MAKE="make"
+
+# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
+# command line option.
+#KERNEL_CC="gcc"
+
+# Assembler to use for the kernel. See also the --kernel-as command line
+# option.
+#KERNEL_AS="as"
+
+# Linker to use for the kernel. See also the --kernel-ld command line option.
+#KERNEL_LD="ld"
+
+# GNU Make to use for the utilities. See also the --utils-make command line
+# option.
+#UTILS_MAKE="make"
+
+# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
+# command line option.
+#UTILS_CC="gcc"
+
+# Assembler to use for the utilities. See also the --utils-as command line
+# option.
+#UTILS_AS="as"
+
+# Linker to use for the utilities. See also the --utils-ld command line
+# option.
+#UTILS_LD="ld"
+
+
+# Common prefix of cros compile commands
+#UTILS_CROSS_COMPILE="x86_64-pc-linux-gnu"
+
+
+# Value of CROSS_COMPILE utils variable
+# during kernel compilation
+#KERNEL_CROSS_COMPILE="x86_64-pc-linux-gnu"
+
+
+# =========GENKERNEL LOCATION CONFIGURATION============
+# Variables:
+# %%ARCH%% - Final determined architecture
+# %%CACHE%% - Final determined cache location
+
+# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
+#TMPDIR="/var/tmp/genkernel"
+
+# Set the boot directory, default is /boot
+#BOOTDIR="/boot"
+
+# Default share directory location
+GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
+
+# Location of the default cache
+CACHE_DIR="/var/cache/genkernel"
+# Location of DISTDIR, where our source tarballs are stored
+DISTDIR="${CACHE_DIR}/src"
+# Log output file
+LOGFILE="/var/log/genkernel.log"
+# Debug Level
+LOGLEVEL=1
+
+# =========COMPILED UTILS CONFIGURATION============
+#
+# Default location of kernel source
+DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+# Default kernel config (only use to override using
+# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
+#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
+
+# Specifies a user created busybox config
+#BUSYBOX_CONFIG="/path/to/file"
+
+BUSYBOX_VER="1.20.1"
+BUSYBOX_SRCTAR="${DISTDIR}/busybox-${BUSYBOX_VER}.tar.bz2"
+BUSYBOX_DIR="busybox-${BUSYBOX_VER}"
+BUSYBOX_BINCACHE="%%CACHE%%/busybox-${BUSYBOX_VER}-%%ARCH%%.tar.bz2"
+#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
+
+DEVICE_MAPPER_VER="1.02.22"
+DEVICE_MAPPER_DIR="device-mapper.${DEVICE_MAPPER_VER}"
+DEVICE_MAPPER_SRCTAR="${DISTDIR}/device-mapper.${DEVICE_MAPPER_VER}.tgz"
+DEVICE_MAPPER_BINCACHE="%%CACHE%%/device-mapper-${DEVICE_MAPPER_VER}-%%ARCH%%.tar.bz2"
+
+LVM_VER="2.02.88"
+LVM_DIR="LVM2.${LVM_VER}"
+LVM_SRCTAR="${DISTDIR}/LVM2.${LVM_VER}.tgz"
+LVM_BINCACHE="%%CACHE%%/LVM2.${LVM_VER}-%%ARCH%%.tar.bz2"
+
+MDADM_VER="3.1.5"
+MDADM_DIR="mdadm-${MDADM_VER}"
+MDADM_SRCTAR="${DISTDIR}/mdadm-${MDADM_VER}.tar.bz2"
+MDADM_BINCACHE="%%CACHE%%/mdadm-${MDADM_VER}-%%ARCH%%.tar.bz2"
+
+DMRAID_VER="1.0.0.rc14"
+DMRAID_DIR="dmraid/${DMRAID_VER}"
+DMRAID_SRCTAR="${DISTDIR}/dmraid-${DMRAID_VER}.tar.bz2"
+DMRAID_BINCACHE="%%CACHE%%/dmraid-${DMRAID_VER}-%%ARCH%%.tar.bz2"
+
+ISCSI_VER="2.0-872"
+ISCSI_DIR="open-iscsi-${ISCSI_VER}"
+ISCSI_SRCTAR="${DISTDIR}/open-iscsi-${ISCSI_VER}.tar.gz"
+ISCSI_BINCACHE="%%CACHE%%/iscsi-${ISCSI_VER}-%%ARCH%%.bz2"
+
+E2FSPROGS_VER="1.42"
+E2FSPROGS_DIR="e2fsprogs-${E2FSPROGS_VER}"
+E2FSPROGS_SRCTAR="${DISTDIR}/e2fsprogs-${E2FSPROGS_VER}.tar.gz"
+BLKID_BINCACHE="%%CACHE%%/blkid-${E2FSPROGS_VER}-%%ARCH%%.bz2"
+
+FUSE_VER="2.8.6"
+FUSE_DIR="fuse-${FUSE_VER}"
+FUSE_SRCTAR="${DISTDIR}/fuse-${FUSE_VER}.tar.gz"
+FUSE_BINCACHE="%%CACHE%%/fuse-${FUSE_VER}-%%ARCH%%.tar.bz2"
+
+UNIONFS_FUSE_VER="0.24"
+UNIONFS_FUSE_DIR="unionfs-fuse-${UNIONFS_FUSE_VER}"
+UNIONFS_FUSE_SRCTAR="${DISTDIR}/unionfs-fuse-${UNIONFS_FUSE_VER}.tar.bz2"
+UNIONFS_FUSE_BINCACHE="%%CACHE%%/unionfs-fuse-${UNIONFS_FUSE_VER}-%%ARCH%%.bz2"
+
+GPG_VER="1.4.11"
+GPG_DIR="gnupg-${GPG_VER}"
+GPG_SRCTAR="${DISTDIR}/gnupg-${GPG_VER}.tar.bz2"
+GPG_BINCACHE="%%CACHE%%/gnupg-${GPG_VER}-%%ARCH%%.bz2"
+
+
+# =========MISC KERNEL CONFIGURATION============
+#
+# Tag the kernel and ramdisk with a name:
+# If not defined the option defaults to
+# 'genkernel'
+#KNAME="genkernel"
+
+
+# This option is only valid if kerncache is
+# defined. If there is a valid kerncache no checks
+# will be made against a kernel source tree
+#KERNEL_SOURCES="0"
+
+
+# Build a static (monolithic kernel)
+#BUILD_STATIC="1"
+
+
+# Make and install kernelz image (PowerPC)
+#GENZIMAGE="1"
+
+
+# File to output a .tar.bz2'd kernel contents
+# of /lib/modules/ and the kernel config
+# NOTE: This is created before the callbacks
+# are run!
+#KERNCACHE="/path/to/file"
+
+
+# Prefix to kernel module destination, modules
+# will be installed in <prefix>/lib/modules
+# (.conf equivalent of --module-prefix=<dir>)
+#INSTALL_MOD_PATH=""
+
+
+# =========MISC INITRD CONFIGURATION============
+#
+# Copy all kernel modules to the ramdisk
+#ALLRAMDISKMODULES="1"
+
+
+# Don't copy any modules to the ramdisk
+#RAMDISKMODULES="0"
+
+
+# File to output a .tar.bz2'd kernel and ramdisk:
+# No modules outside of the ramdisk will be
+# included...
+#MINKERNPACKAGE="/path/to/file.bz2"
+
+
+# File to output a .tar.bz2'd modules after the
+# callbacks have run
+#MODULESPACKAGE="/path/to/file.bz2"
+
+
+# Directory structure to include in the initramfs,
+# only available on >=2.6 kernels
+#INITRAMFS_OVERLAY=""
+
+
+# Build the generated initramfs into the kernel instead of
+# keeping it as a separate file
+#INTEGRATED_INITRAMFS="1"
+
+
+# Create a self-contained env in the initramfs
+#NETBOOT="1"
+
+
+# =========MISC BOOT CONFIGURATION============
+#
+# Specify a default for real_root=
+#REAL_ROOT="/dev/one/two/gentoo"
-Gentoo Base System release 2.0.3
+Gentoo Base System release 2.1
polw:x:102:
teamspeak3:x:103:
nagios:x:104:frank
-wireshark:x:105:
+crontab:x:105:
lpadmin:x:106:
-messagebus:x:110:
rpc:x:111:
locate:x:122:frank,taurec,morph,patrick,vivi
ntp:x:123:
tcpdump:x:196:
ulogd:x:197:
-crontab:x:198:
-ssmtp:x:199:
nofiles:x:200:
postfix:x:207:
postdrop:x:208:
smmsp:x:209:smmsp
+git-commiters:x:222:frank,taurec,morph,portage
+messagebus:x:247:
+ssmtp:x:248:
+postmaster:x:249:
portage:x:250:portage,frank,taurec
utmp:x:406:
ldap:x:439:
+git:x:996:
+openvpn:x:997:
clamav:x:998:
-amavis:x:999:
+amavis:x:999:clamav
+minecraft:x:1002:
proftpd:x:1008:
vmail:x:1023:
nogroup:x:65533:
nobody:x:65534:
-minecraft:x:1002:
-git-commiters:x:222:frank,taurec,morph,portage
-openvpn:x:997:
-git:x:996:
-root:::root,frank
+root:::root
bin:::root,bin,daemon
daemon:::root,bin,daemon
sys:::root,bin,adm
adm:::root,adm,daemon
-tty:::frank,taurec
+tty:::
disk:::root,adm
-lp:::lp,frank,taurec
+lp:::lp
mem:::
kmem:::
-wheel:::root,frank,taurec,morph
+wheel:::root
floppy:::root
-mail:::mail,postfix
news:::news
uucp:::uucp
-man:::man
-cron:x::frank,taurec,morph,patrick,vivi,minecraft
-console:::frank,taurec
-audio:::frank,taurec
+console:::
+audio:::
cdrom:::
-dialout:::root
-ftp:x::
-sshd:x::
-at:x::
tape:::root
-video:::root,frank,taurec
-games:x::
-named:x::
-mysql:x::
+video:::root
cdrw:::
-apache:x::
usb:::
-users:::games,taurec
-postgrey:x::
-polw:x::
-teamspeak3:x::
-nagios:x::frank
-wireshark:x::
-lpadmin:x::
-messagebus:x::
-rpc:x::
-locate:x::frank,taurec,morph,patrick,vivi
-ntp:x::
-tcpdump:x::
-ulogd:x::
-crontab:x::
-ssmtp:x::
-nofiles:x::
-postfix:x::
-postdrop:x::
-smmsp:x::smmsp
-portage:::portage,frank,taurec
+users:::
+portage:::portage
utmp:x::
-ldap:x::
-clamav:x::
-amavis:x::
-proftpd:x::
-vmail:x::
nogroup:::
nobody:::
-minecraft:!::
-git-commiters:!::
-openvpn:!::
-git:!::
+man:x::
+sshd:!::
+mail:!::postfix
+postmaster:!::
+ssmtp:!::
+messagebus:!::
+lpadmin:!::
+mysql:!::
+ldap:!::
+apache:!::
+postfix:!::
+postdrop:!::
+cron:!::
+crontab:!::
+ntp:!::
+named:!::
+at:!::
--- /dev/null
+# Example /etc/gssapi_mech.conf file
+#
+# GSSAPI Mechanism Definitions
+#
+# This configuration file determines which GSS-API mechanisms
+# the gssd code should use
+#
+# NOTE:
+# The initiaiization function "mechglue_internal_krb5_init"
+# is used for the MIT krb5 gssapi mechanism. This special
+# function name indicates that an internal function should
+# be used to determine the entry points for the MIT gssapi
+# mechanism funtions.
+#
+# library initialization function
+# ================================ ==========================
+# The MIT K5 gssapi library, use special function for initialization.
+/usr/lib/libgssapi_krb5.so mechglue_internal_krb5_init
+#
+# The SPKM3 gssapi library function. Use the function spkm3_gss_initialize.
+# /usr/local/gss_mechs/spkm/spkm3/libgssapi_spkm3.so spkm3_gss_initialize
# GTK+ Input Method Modules file
# Automatically generated file, do not edit
-# Created by gtk-query-immodules-2.0 from gtk+-2.24.8
+# Created by gtk-query-immodules-2.0 from gtk+-2.24.10
#
# ModulesPath = /root/.gtk-2.0/2.10.0/x86_64-pc-linux-gnu/immodules:/root/.gtk-2.0/2.10.0/immodules:/root/.gtk-2.0/x86_64-pc-linux-gnu/immodules:/root/.gtk-2.0/immodules:/usr/lib64/gtk-2.0/2.10.0/x86_64-pc-linux-gnu/immodules:/usr/lib64/gtk-2.0/2.10.0/immodules:/usr/lib64/gtk-2.0/x86_64-pc-linux-gnu/immodules:/usr/lib64/gtk-2.0/immodules
#
"/usr/lib64/gtk-2.0/2.10.0/immodules/im-inuktitut.so"
"inuktitut" "Inuktitut (Transliterated)" "gtk20" "/usr/share/locale" "iu"
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-cyrillic-translit.so"
-"cyrillic_translit" "Cyrillic (Transliterated)" "gtk20" "/usr/share/locale" ""
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-thai.so"
+"thai" "Thai-Lao" "gtk20" "/usr/share/locale" "lo:th"
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-am-et.so"
-"am_et" "Amharic (EZ+)" "gtk20" "/usr/share/locale" "am"
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-cedilla.so"
+"cedilla" "Cedilla" "gtk20" "/usr/share/locale" "az:ca:co:fr:gv:oc:pt:sq:tr:wa"
+
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-ti-er.so"
+"ti_er" "Tigrigna-Eritrean (EZ+)" "gtk20" "/usr/share/locale" "ti"
+
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-ti-et.so"
+"ti_et" "Tigrigna-Ethiopian (EZ+)" "gtk20" "/usr/share/locale" "ti"
"/usr/lib64/gtk-2.0/2.10.0/immodules/im-viqr.so"
"viqr" "Vietnamese (VIQR)" "gtk20" "/usr/share/locale" "vi"
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-xim.so"
-"xim" "X Input Method" "gtk20" "/usr/share/locale" "ko:ja:th:zh"
-
"/usr/lib64/gtk-2.0/2.10.0/immodules/im-multipress.so"
"multipress" "Multipress" "gtk20" "" ""
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-cedilla.so"
-"cedilla" "Cedilla" "gtk20" "/usr/share/locale" "az:ca:co:fr:gv:oc:pt:sq:tr:wa"
-
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-thai.so"
-"thai" "Thai-Lao" "gtk20" "/usr/share/locale" "lo:th"
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-cyrillic-translit.so"
+"cyrillic_translit" "Cyrillic (Transliterated)" "gtk20" "/usr/share/locale" ""
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-ti-et.so"
-"ti_et" "Tigrigna-Ethiopian (EZ+)" "gtk20" "/usr/share/locale" "ti"
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-xim.so"
+"xim" "X Input Method" "gtk20" "/usr/share/locale" "ko:ja:th:zh"
-"/usr/lib64/gtk-2.0/2.10.0/immodules/im-ti-er.so"
-"ti_er" "Tigrigna-Eritrean (EZ+)" "gtk20" "/usr/share/locale" "ti"
+"/usr/lib64/gtk-2.0/2.10.0/immodules/im-am-et.so"
+"am_et" "Amharic (EZ+)" "gtk20" "/usr/share/locale" "am"
# IPv4 and IPv6 localhost aliases
127.0.0.1 localhost
+::1 localhost
-::1 localhost ip6-localhost ip6-loopback
+85.214.134.152 helga.brehm-online.com helga h1763652.stratoserver.net h1763652
+2a01:238:4225:6e00:8f8c:808a:7fb8:88df helga.brehm-online.com helga h1763652.stratoserver.net h1763652
-85.214.134.152 helga.brehm-online.com helga h1763652.stratoserver.net h1763652
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-192.166.201.59 gw.berlin.strato.de
-192.166.192.168 gw-rz.berlin.strato.de
-192.166.201.222 sarkomand-201-222-strato-full.cronon.net
-
-2001:6f8:1c00:365::2 home.brehm-online.com
-
-10.20.0.6 debian-1 debian-1.acwain.com
-10.20.0.10 debian-2 debian-2.acwain.com
+2001:6f8:1c00:365::2 home.brehm-online.com
#
# Imaginary network.
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.06.07.20.20.05; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@#!/sbin/runscript
-# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/files/sshd.rc6,v 1.27 2009/08/12 08:09:52 idl0r Exp $
-
-depend() {
- use logger dns
- need net
-}
-
-DAEMON_USER="frank"
-DAEMON_GROUP="users"
-PID_DIR="/var/run/frank"
-
-# Pid file to use (needs to be absolute path).
-DAEMON_PIDFILE="${PID_DIR}/books-prod.pid"
-
-# Working directory (needs to be absolute path).
-DAEMON_DIR="/var/www/books"
-
-# Path to the binary (needs to be absolute path).
-DAEMON_BINARY="${DAEMON_DIR}/script/frbr_books_fastcgi.pl"
-
-# Path to the socket for Apache mod_fastcgi
-DAEMON_SOCKET="/tmp/frbr_books_app.sock"
-
-# Count of daemon processes
-DAEMON_COUNT=2
-
-start() {
-
- if [ ! -d "${PID_DIR}" ] ; then
- mkdir -p "${PID_DIR}"
- fi
- chown "${DAEMON_USER}":"${DAEMON_GROUP}" "${PID_DIR}"
-
- local myopts="-l ${DAEMON_SOCKET} -n ${DAEMON_COUNT} -d -p ${DAEMON_PIDFILE}"
-
- ebegin "Starting ${SVCNAME}"
-# start-stop-daemon --start --exec "${DAEMON_BINARY}" \
-# --chuid "${DAEMON_USER}":${DAEMON_GROUP} \
-# --pidfile "${DAEMON_PIDFILE}" \
-# -- ${myopts}
- su - "${DAEMON_USER}" -c "cd ${DAEMON_DIR} && ${DAEMON_BINARY} ${myopts}"
- eend $?
-}
-
-stop() {
- ebegin "Stopping ${SVCNAME}"
- start-stop-daemon --stop --exec "${DAEMON_BINARY}" \
- --pidfile "${DAEMON_PIDFILE}" --quiet
- eend $?
-}
-
-@
#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/mail-filter/amavisd-new/files/amavisd.initd,v 1.2 2010/12/07 10:34:32 eras Exp $
+# $Header: /var/cvsroot/gentoo-x86/mail-filter/amavisd-new/files/amavisd.initd,v 1.4 2012/01/10 13:46:47 eras Exp $
-opts="${opts} reload debug debug_sa"
+extra_started_commands="reload"
+extra_commands="debug debug_sa"
prog="/usr/sbin/amavisd"
progname="amavisd-new"
-conffile="/etc/amavisd.conf"
depend() {
need net
before mta
}
-checkconfig() {
- local piddir pidfile
- if [ -r "${conffile}" ] ; then
- pidfile=$(grep -m1 ^[^#].*pid_file "${conffile}"|sed -e 's/.*"\(.*\)".*/\1/')
- piddir=${pidfile%/*}
- if [ ! -d "${piddir:-/var/amavis}" ] ; then
- checkpath -q -d -o root:amavis -m 0770 "${piddir}" || return 1
- fi
- else
- eerror "Missing conf file."
- return 1
- fi
-}
-
start() {
ebegin "Starting ${progname}"
- checkconfig || return 1
"${prog}" start
eend $?
}
debug() {
ebegin "Starting ${progname} in debug mode"
- checkconfig || return 1
"${prog}" debug
eend $?
}
debug_sa() {
ebegin "Starting ${progname} in debug-sa mode"
- checkconfig || return 1
"${prog}" debug-sa
eend $?
}
#!/sbin/runscript
-# Copyright 1999-2005 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/auditd-init.d-1.2.3,v 1.1 2006/06/22 07:41:46 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/auditd-init.d-2.1.3,v 1.1 2011/09/11 02:58:55 robbat2 Exp $
+
+extra_started_commands='reload reload_auditd reload_rules'
+description='Linux Auditing System'
+description_reload='Reload daemon configuration and rules'
+description_reload_rules='Reload daemon rules'
+description_reload_auditd='Reload daemon configuration'
+
+name='auditd'
+pidfile='/var/run/auditd.pid'
+command='/sbin/auditd'
start_auditd() {
- ebegin "Starting auditd"
+ # Env handling taken from the upstream init script
+ if [ -z "$AUDITD_LANG" -o "$AUDITD_LANG" = "none" -o "$AUDITD_LANG" = "NONE" ]; then
+ unset LANG LC_TIME LC_ALL LC_MESSAGES LC_NUMERIC LC_MONETARY LC_COLLATE
+ else
+ LANG="$AUDITD_LANG"
+ LC_TIME="$AUDITD_LANG"
+ LC_ALL="$AUDITD_LANG"
+ LC_MESSAGES="$AUDITD_LANG"
+ LC_NUMERIC="$AUDITD_LANG"
+ LC_MONETARY="$AUDITD_LANG"
+ LC_COLLATE="$AUDITD_LANG"
+ export LANG LC_TIME LC_ALL LC_MESSAGES LC_NUMERIC LC_MONETARY LC_COLLATE
+ fi
+ unset HOME MAIL USER USERNAME
+
+ ebegin "Starting ${name}"
start-stop-daemon \
- --start --quiet --pidfile /var/run/auditd.pid \
- --exec /sbin/auditd -- ${EXTRAOPTIONS}
+ --start --quiet --pidfile ${pidfile} \
+ --exec ${command} -- ${EXTRAOPTIONS}
local ret=$?
eend $ret
return $ret
}
stop_auditd() {
- ebegin "Stopping auditd"
- start-stop-daemon \
- --stop --quiet --pidfile /var/run/auditd.pid
+ ebegin "Stopping ${name}"
+ start-stop-daemon --stop --quiet --pidfile ${pidfile}
local ret=$?
eend $ret
return $ret
start() {
start_auditd
local ret=$?
- if [ $ret -eq 0 ]; then
+ if [ $ret -eq 0 -a "${RC_CMD}" != "restart" ]; then
+ touch /var/lock/subsys/${name}
loadfile "${RULEFILE_STARTUP}"
fi
return $ret
}
+reload_rules() {
+ loadfile "${RULEFILE_STARTUP}"
+}
+
+reload_auditd() {
+ [ -f ${pidfile} ] && kill -HUP `cat ${pidfile}`
+}
+
+reload() {
+ reload_auditd
+ reload_rules
+}
+
stop() {
- loadfile "${RULEFILE_STOP_PRE}"
+ [ "${RC_CMD}" != "restart" ] && loadfile "${RULEFILE_STOP_PRE}"
stop_auditd
+ rm -f /var/lock/subsys/${name}
local ret=$?
- loadfile "${RULEFILE_STOP_POST}"
+ [ "${RC_CMD}" != "restart" ] && loadfile "${RULEFILE_STOP_POST}"
return $ret
}
#!/sbin/runscript
-# Copyright 1999-2005 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-antivirus/clamav/files/clamd.rc,v 1.17 2009/06/21 09:46:12 dertobi123 Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-antivirus/clamav/files/clamd.rc,v 1.18 2011/12/04 11:51:46 swegener Exp $
-opts="logfix"
+extra_commands="logfix"
depend() {
use net
#!/sbin/runscript
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.1 2011/06/16 12:53:26 pva Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.2 2011/12/04 10:15:59 swegener Exp $
-opts="save reload panic"
+extra_commands="save panic"
+extra_started_commands="reload"
iptables_name=${SVCNAME}
if [ "${iptables_name}" != "iptables" -a "${iptables_name}" != "ip6tables" ] ; then
#!/sbin/runscript
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.1 2011/06/16 12:53:26 pva Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.11.init,v 1.2 2011/12/04 10:15:59 swegener Exp $
-opts="save reload panic"
+extra_commands="save panic"
+extra_started_commands="reload"
iptables_name=${SVCNAME}
if [ "${iptables_name}" != "iptables" -a "${iptables_name}" != "ip6tables" ] ; then
#!/sbin/runscript
-# Copyright 1999-2004 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/files/nagios3,v 1.1 2008/04/27 18:41:25 dertobi123 Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/files/nagios3,v 1.2 2011/12/30 15:34:02 polynomial-c Exp $
-opts="${opts} reload checkconfig"
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+nagios_config="/etc/nagios/nagios.cfg"
+nagios_cmdfile="/var/nagios/rw/nagios.cmd"
+
+command="/usr/sbin/nagios"
+command_args="-d ${nagios_config}"
+pidfile="/var/nagios/nagios.lock"
+start_stop_daemon_args="-e HOME=/var/nagios/home"
depend() {
need net
{
checkconfig || return 1
ebegin "Reloading configuration"
- killall -HUP nagios &>/dev/null
+ start-stop-daemon --signal HUP --pidfile ${pidfile}
eend $?
}
checkconfig() {
+ ebegin "Verifiyng config files"
+
# Silent Check
- /usr/sbin/nagios -v /etc/nagios/nagios.cfg &>/dev/null && return 0
+ /usr/sbin/nagios -v ${nagios_config} &>/dev/null && return 0
# Now we know there's problem - run again and display errors
- /usr/sbin/nagios -v /etc/nagios/nagios.cfg
+ /usr/sbin/nagios -v ${nagios_config}
eend $? "Configuration Error. Please fix your configfile"
}
-start() {
+start_pre() {
checkconfig || return 1
- ebegin "Starting nagios"
+
touch /var/nagios/nagios.log /var/nagios/status.sav
chown nagios:nagios /var/nagios/nagios.log /var/nagios/status.sav
- rm -f /var/nagios/rw/nagios.cmd
- start-stop-daemon --quiet --start --startas /usr/sbin/nagios \
- -e HOME="/var/nagios/home" --pidfile /var/nagios/nagios.lock \
- -- -d /etc/nagios/nagios.cfg
- eend $?
+ rm -f ${nagios_cmdfile}
}
-stop() {
- ebegin "Stopping nagios"
- start-stop-daemon --quiet --stop --pidfile /var/nagios/nagios.lock
- rm -f /var/nagios/status.log /var/nagios/nagios.tmp /var/nagios/nagios.lock /var/nagios/rw/nagios.cmd
- eend $?
+stop_post() {
+ rm -f /var/nagios/status.log /var/nagios/nagios.tmp ${pidfile} \
+ ${nagios_cmdfile}
}
-
-svc_restart() {
- checkconfig || return 1
- ebegin "Restarting nagios"
- svc_stop
- svc_start
- eend $?
-}
-
#!/sbin/runscript
-# Copyright 1999-2007 Gentoo Foundation
+# Copyright 1999-2010 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/ndoutils/files/ndo2db.init,v 1.1 2007/07/01 08:29:56 dertobi123 Exp $
-
-MY_NAGIOS_MAIN_VERSION=3
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/ndoutils/files/ndo2db.init-nagios3,v 1.3 2010/10/30 14:15:50 dertobi123 Exp $
depends() {
before nagios
start() {
ebegin "Starting ndo2db"
- start-stop-daemon --start --quiet --exec /usr/sbin/ndo2db-${MY_NAGIOS_MAIN_VERSION}x \
+ if [ -S /var/nagios/ndo.sock ] ; then
+ rm -f /var/nagios/ndo.sock
+ fi
+ start-stop-daemon --start --quiet --exec /usr/bin/ndo2db \
-- -c /etc/nagios/ndo2db.cfg
eend $?
}
stop() {
ebegin "Stopping ndo2db"
- start-stop-daemon --stop --quiet --exec /usr/sbin/ndo2db-${MY_NAGIOS_MAIN_VERSION}x
+ start-stop-daemon --stop --quiet --exec /usr/bin/ndo2db
eend $?
}
-
#!/sbin/runscript
-opts="${opts} reload"
+extra_started_commands="reload"
+
+command="/usr/bin/nrpe"
+command_args="-c /etc/nagios/nrpe.cfg --daemon"
+pidfile="${pidfile:-/var/run/nrpe/nrpe.pid}"
+start_stop_daemon_args="--user nagios --group nagios"
depend() {
need net
}
-start() {
- ebegin "Starting nrpe"
- start-stop-daemon --start --quiet --name nrpe \
- --startas /usr/bin/nrpe \
- -c nagios:nagios \
- -- -c /etc/nagios/nrpe.cfg \
- --daemon
- eend $? "Failed to Start nrpe"
-}
-
-stop() {
- ebegin "Stopping nrpe"
- start-stop-daemon --stop --quiet -n nrpe
- eend $? "Failed to Stop nrpe"
+start_pre() {
+ checkpath -d -m 0750 -o nagios:nagios /var/run/nrpe
}
reload() {
ebegin "Reloading nrpe"
- kill -HUP `pgrep nrpe | head -1`
+ kill -HUP $(head -n1 ${pidfile})
eend $? "Failed to reload nrpe"
}
-
-restart() {
- ebegin "Restarting nrpe"
- svc_stop
- svc_start
- eend $? "Failed to Restart nrpe"
-}
#!/sbin/runscript
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo/src/patchsets/glibc/extra/etc/nscd,v 1.3 2009/09/18 12:29:46 flameeyes Exp $
+# $Header: /var/cvsroot/gentoo/src/patchsets/glibc/extra/etc/nscd,v 1.5 2011/08/29 05:21:40 vapier Exp $
depend() {
use dns ldap net slapd
checkconfig() {
if [ ! -d /var/run/nscd ] ; then
- mkdir -p /var/run/nscd
- chmod 755 /var/run/nscd
+ checkpath -d -m 755 /var/run/nscd
fi
if [ -z "${NSCD_PERMS_OK}" ] && [ "$(stat -c %a /var/run/nscd)" != "755" ] ; then
- echo ""
ewarn "nscd run dir is not world readable, you should reset the perms:"
ewarn "chmod 755 /var/run/nscd"
ewarn "chmod a+rw /var/run/nscd/socket"
- echo ""
ewarn "To disable this warning, set 'NSCD_PERMS_OK' in /etc/conf.d/nscd"
- echo ""
+ fi
+
+ if grep -qs '^[[:space:]]*persistent\>' /etc/nscd.conf ; then
+ checkpath -d -m 700 /var/db/nscd
fi
}
checkconfig
ebegin "Starting Name Service Cache Daemon"
+
local secure=`while read curline ; do
table=${curline%:*}
entries=${curline##$table:}
;;
esac
done < /etc/nsswitch.conf`
- local pidfile=/var/run/nscd/nscd.pid
- mkdir -p "$(dirname ${pidfile})"
+
+ local pidfile="/var/run/nscd/nscd.pid"
+ mkdir -p "${pidfile%/*}"
+
start-stop-daemon --start --quiet \
--exec /usr/sbin/nscd --pidfile ${pidfile} \
-- $secure
}
stop() {
- local pidfile=/var/run/nscd/nscd.pid
+ local pidfile="/var/run/nscd/nscd.pid"
ebegin "Shutting down Name Service Cache Daemon"
start-stop-daemon --stop --quiet \
--exec /usr/sbin/nscd --pidfile ${pidfile}
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-nds/portmap/files/portmap.rc6,v 1.13 2009/05/30 20:50:39 vapier Exp $
-
-depend() {
- use net
- before inetd
- before xinetd
-}
-
-checkconfig() {
- if [ -e /proc/config.gz ] ; then
- if zcat /proc/config.gz | grep -s SUNRPC_REGISTER_V4=y ; then
- eerror "portmap does not work with SUNRPC_REGISTER_V4=y;"
- eerror "disable it or use the net-nds/rpcbind package."
- return 1
- fi
- fi
- return 0
-}
-
-start() {
- checkconfig || return 1
-
- ebegin "Starting portmap"
- start-stop-daemon --start --quiet --exec /sbin/portmap -- ${PORTMAP_OPTS}
- local ret=$?
- eend ${ret}
- # without, if a service depending on portmap is started too fast,
- # connecting to portmap will fail -- azarah
- sleep 1
- return ${ret}
-}
-
-stop() {
- ebegin "Stopping portmap"
- start-stop-daemon --stop --quiet --exec /sbin/portmap
- eend $?
-}
-
-restart() {
- # Dump the portmapper's table before stopping
- ebegin "Saving portmap table"
- local pmap=$(pmap_dump)
- eend $?
-
- # Stop and restart portmapper
- svc_stop
- sleep 1
- svc_start
-
- # Reload the portmapper's table
- if [ -n "${pmap}" ] ; then
- ebegin "Reloading portmap table"
- echo "${pmap}" | pmap_set
- eend $?
- fi
-}
extra_started_commands="reload"
depend() {
- use logger dns ypbind amavisd mysql antivirus postfix_greylist net saslauthd
+ use logger dns ypbind amavisd mysql postgresql antivirus postfix_greylist net saslauthd
if [ "${SVCNAME}" = "postfix" ]; then
provide mta
fi
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/quota.rc7,v 1.1 2011/03/03 07:26:27 jlec Exp $
-
-extra_started_commands="check"
-description_check="Running quotacheck with quota being offline"
-
-depend() {
- need localmount
- use portmap
-}
-
-start() {
- if [[ ${RUN_QUOTACHECK} == "yes" ]] ; then
- ebegin "Checking quotas (may take a while)"
- quotacheck ${QUOTACHECK_OPTS}
- eend $?
- fi
-
- ebegin "Starting quota"
- quotaon ${QUOTAON_OPTS}
- eend $?
-}
-
-stop() {
- ebegin "Stopping quota"
- quotaoff ${QUOTAOFF_OPTS}
- eend $?
-}
-
-check() {
- ebegin "Checking quota"
- quotaoff ${QUOTAOFF_OPTS} && \
- quotacheck ${QUOTACHECK_OPTS} && \
- quotaon ${QUOTAON_OPTS}
- eend $?
-}
+++ /dev/null
-#!/sbin/runscript
-# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/rpc.rquotad.initd,v 1.1 2007/03/25 12:09:39 vapier Exp $
-
-[ -e /etc/conf.d/nfs ] && source /etc/conf.d/nfs
-
-rpc_bin=/usr/sbin/rpc.rquotad
-
-depend() {
- use ypbind net
- need portmap
- after quota
-}
-
-start() {
- ebegin "Starting rpc.rquotad"
- ${rpc_bin} ${OPTS_RPC_RQUOTAD}
- eend $?
-}
-
-stop() {
- ebegin "Stopping rpc.rquotad"
- start-stop-daemon --stop --quiet --exec ${rpc_bin}
- eend $?
-}
#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/3.5/samba.initd,v 1.2 2010/12/20 20:35:07 vostorga Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/3.5/samba.initd,v 1.4 2011/09/14 22:52:33 polynomial-c Exp $
-opts="reload"
+extra_started_commands="reload"
depend() {
after slapd
#!/sbin/runscript
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/files/slapd-initd-2.4.28-r1,v 1.2 2012/02/12 21:35:04 robbat2 Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/files/slapd-initd-2.4.28-r1,v 1.4 2012/05/27 07:22:43 robbat2 Exp $
extra_commands="checkconfig"
}
start() {
+ checkpath -q -d /var/run/openldap/ -o ldap:ldap
if ! checkconfig -Q ; then
eerror "There is a problem with your slapd.conf!"
return 1
#!/sbin/runscript
-# Copyright 1999-2009 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmpd.init,v 1.1 2009/10/16 08:51:05 gengor Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/net-snmp/files/snmpd.init,v 1.2 2011/12/04 10:17:16 swegener Exp $
-opts="${opts} reload"
+extra_started_commands="reload"
depend() {
use logger
#!/sbin/runscript
-# Copyright 1999-2008 Gentoo Foundation
+# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/mail-filter/spamassassin/files/3.3.1-spamd.init,v 1.2 2010/04/07 04:13:24 darkside Exp $
+# $Header: /var/cvsroot/gentoo-x86/mail-filter/spamassassin/files/3.3.1-spamd.init,v 1.4 2011/09/14 23:00:38 polynomial-c Exp $
# NB: Config is in /etc/conf.d/spamd
# Provide a default location if they haven't in /etc/conf.d/spamd
PIDFILE=${PIDFILE:-/var/run/spamd.pid}
-opts="reload"
+extra_started_commands="reload"
depend() {
need net
before mta
use logger
+ use postgresql
use mysql
}
#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/sysstat/files/sysstat.init.d,v 1.3 2011/05/18 02:21:33 jer Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-admin/sysstat/files/sysstat.init.d,v 1.4 2012/05/14 20:01:19 jer Exp $
depend() {
use hostname
start() {
ebegin "Writing a dummy startup record using sadc (see sadc(8))..."
- /usr/lib/sa/sadc -F -L -
+ /usr/lib/sa/sa1 --boot
eend $?
}
#!/sbin/runscript
-# Copyright 1999-2010 Gentoo Foundation
+# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-sound/teamspeak-server-bin/files/teamspeak3-server.rc,v 1.4 2010/09/11 16:01:50 trapni Exp $
+# $Header: /var/cvsroot/gentoo-x86/media-sound/teamspeak-server-bin/files/teamspeak3-server.rc,v 1.5 2012/05/10 20:14:34 trapni Exp $
depend() {
need net
start-stop-daemon --start --quiet --background \
--pidfile "/var/run/teamspeak3-server/server.pid" --make-pidfile \
- --chuid "teamspeak3" --chdir "/opt/teamspeak3-server" \
+ --user "teamspeak3" --chdir "/opt/teamspeak3-server" \
--exec "/usr/sbin/ts3server" -- \
inifile="/etc/teamspeak3-server/server.conf"
su1:S:wait:/sbin/sulogin
# TERMINALS
-c1:12345:respawn:/sbin/agetty 38400 tty1 linux
+c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux
c2:2345:respawn:/sbin/agetty 38400 tty2 linux
c3:2345:respawn:/sbin/agetty 38400 tty3 linux
c4:2345:respawn:/sbin/agetty 38400 tty4 linux
c6:2345:respawn:/sbin/agetty 38400 tty6 linux
# SERIAL CONSOLES
-#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
-#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100
+#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100
s0:12345:respawn:/sbin/agetty -L ttyS0 57600 vt100
# What to do at the "Three Finger Salute".
--- /dev/null
+# device group names
+0 default
--- /dev/null
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86_64 3.3.8-gentoo Kernel Configuration
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_ARCH_CPU_PROBE_RELEASE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="helga"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=21
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_CGROUP_PERF is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_BLK_CGROUP=m
+# CONFIG_DEBUG_BLK_CGROUP is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+CONFIG_KPROBES=y
+# CONFIG_JUMP_LABEL is not set
+CONFIG_OPTPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=m
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_SMP=y
+# CONFIG_X86_X2APIC is not set
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_EXTENDED_PLATFORM=y
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+# CONFIG_MEMTEST is not set
+CONFIG_MK8=y
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+# CONFIG_GENERIC_CPU is not set
+CONFIG_X86_INTERNODE_CACHE_SHIFT=7
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_XADD=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+CONFIG_CALGARY_IOMMU=y
+CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=64
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+# CONFIG_X86_MCE_INJECT is not set
+CONFIG_X86_THERMAL_VECTOR=y
+# CONFIG_I8K is not set
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+CONFIG_NUMA=y
+CONFIG_AMD_NUMA=y
+CONFIG_X86_64_ACPI_NUMA=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
+# CONFIG_NUMA_EMU is not set
+CONFIG_NODES_SHIFT=6
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+# CONFIG_MEMORY_FAILURE is not set
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_CLEANCACHE=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_EFI=y
+# CONFIG_EFI_STUB is not set
+CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_USE_PERCPU_NUMA_NODE_ID=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=m
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=m
+CONFIG_ACPI_BATTERY=m
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_IPMI=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=y
+# CONFIG_ACPI_SBS is not set
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_CUSTOM_METHOD=m
+CONFIG_ACPI_APEI=y
+# CONFIG_ACPI_APEI_GHES is not set
+# CONFIG_ACPI_APEI_PCIEAER is not set
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+# CONFIG_SFI is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# x86 CPU frequency scaling drivers
+#
+CONFIG_X86_PCC_CPUFREQ=m
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
+
+#
+# shared options
+#
+# CONFIG_X86_SPEEDSTEP_LIB is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_INTEL_IDLE is not set
+
+#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_HT_IRQ=y
+CONFIG_PCI_ATS=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
+CONFIG_PCI_IOAPIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_RAPIDIO is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_IA32_EMULATION=y
+CONFIG_IA32_AOUT=m
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_HAVE_TEXT_POKE_SMP=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_RENO=y
+CONFIG_DEFAULT_TCP_CONG="reno"
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+# CONFIG_NF_CONNTRACK_ZONES is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_NET_DCCPPROBE is not set
+CONFIG_IP_SCTP=m
+CONFIG_NET_SCTPPROBE=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+CONFIG_TIPC=m
+CONFIG_TIPC_ADVANCED=y
+CONFIG_TIPC_PORTS=8191
+CONFIG_TIPC_LOG=0
+# CONFIG_TIPC_DEBUG is not set
+# CONFIG_ATM is not set
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+# CONFIG_L2TP_V3 is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+# CONFIG_GACT_PROB is not set
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_NETPRIO_CGROUP=m
+CONFIG_BQL=y
+CONFIG_HAVE_BPF_JIT=y
+# CONFIG_BPF_JIT is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+# CONFIG_NFC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_BLK_DEV_OSD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_RBD=m
+
+#
+# Misc devices
+#
+CONFIG_SENSORS_LIS3LV02D=m
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_VMWARE_BALLOON is not set
+# CONFIG_BMP085 is not set
+# CONFIG_PCH_PHUB is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+CONFIG_SENSORS_LIS3_I2C=m
+
+#
+# Altera FPGA firmware download module
+#
+CONFIG_ALTERA_STAPL=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_ATA is not set
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_DH=m
+# CONFIG_SCSI_DH_RDAC is not set
+# CONFIG_SCSI_DH_HP_SW is not set
+# CONFIG_SCSI_DH_EMC is not set
+# CONFIG_SCSI_DH_ALUA is not set
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ALI is not set
+CONFIG_PATA_AMD=y
+# CONFIG_PATA_ARASAN_CF is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87415 is not set
+CONFIG_PATA_OLDPIIX=y
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_SC1200 is not set
+CONFIG_PATA_SCH=y
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_PATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=m
+CONFIG_MULTICORE_RAID456=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_BUFIO=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_DEBUG_SPACE_MAPS=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_DM_FLAKEY=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_ISCSI_TARGET=m
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+CONFIG_FIREWIRE_NOSY=m
+CONFIG_I2O=m
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+# CONFIG_I2O_SCSI is not set
+CONFIG_I2O_PROC=m
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_FC is not set
+CONFIG_MII=y
+CONFIG_IFB=m
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_SUNGEM_PHY=m
+# CONFIG_ARCNET is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+# CONFIG_NET_CALXEDA_XGMAC is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+CONFIG_CHELSIO_T4VF=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBEVF=m
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_ZNET=m
+CONFIG_IP1000=m
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+# CONFIG_SKGE_GENESIS is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_8390=y
+CONFIG_NE2K_PCI=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_PCH_GBE=m
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_SEEQ8005=m
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_EPIC100=m
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_PLATFORM=m
+# CONFIG_STMMAC_PCI is not set
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_RING=y
+# CONFIG_STMMAC_CHAINED is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_VELOCITY=m
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_ISI is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+
+#
+# KCopy
+#
+CONFIG_KCOPY=m
+CONFIG_DEVKMEM=y
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MFD_HSU is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_PCH_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIA=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_MWAVE is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_MUX_PCA9541 is not set
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# ACPI drivers
+#
+CONFIG_I2C_SCMI=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DESIGNWARE_PCI=m
+CONFIG_I2C_INTEL_MID=m
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+# CONFIG_I2C_XILINX is not set
+CONFIG_I2C_EG20T=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_TEST_POWER=m
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7411=m
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+CONFIG_SENSORS_ASC7621=m
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS620=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LINEAGE=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_LTC4151=m
+CONFIG_SENSORS_LTC4215=m
+CONFIG_SENSORS_LTC4245=m
+CONFIG_SENSORS_LTC4261=m
+CONFIG_SENSORS_LM95241=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_MAX16065=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX1668=m
+CONFIG_SENSORS_MAX6639=m
+CONFIG_SENSORS_MAX6642=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+CONFIG_SENSORS_SHT21=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_SMM665=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_EMC1403=m
+CONFIG_SENSORS_EMC2103=m
+CONFIG_SENSORS_EMC6W201=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_SCH56XX_COMMON=m
+CONFIG_SENSORS_SCH5627=m
+CONFIG_SENSORS_SCH5636=m
+CONFIG_SENSORS_ADS1015=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_AMC6821=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83795=m
+CONFIG_SENSORS_W83795_FANCTRL=y
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_APPLESMC=m
+
+#
+# ACPI drivers
+#
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ACQUIRE_WDT=m
+CONFIG_ADVANTECH_WDT=m
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+CONFIG_F71808E_WDT=m
+CONFIG_SP5100_TCO=m
+CONFIG_SC520_WDT=m
+CONFIG_SBC_FITPC2_WATCHDOG=m
+CONFIG_EUROTECH_WDT=m
+CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
+CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+# CONFIG_ITCO_VENDOR_SUPPORT is not set
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+# CONFIG_HPWDT_NMI_DECODING is not set
+CONFIG_SC1200_WDT=m
+CONFIG_PC87413_WDT=m
+CONFIG_NV_TCO=m
+CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
+CONFIG_CPU5_WDT=m
+CONFIG_SMSC_SCH311X_WDT=m
+CONFIG_SMSC37B787_WDT=m
+CONFIG_VIA_WDT=m
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+CONFIG_W83697UG_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+CONFIG_SBC_EPX_C3_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+CONFIG_BCMA=m
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+# CONFIG_BCMA_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_S5M_CORE is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_CS5535 is not set
+CONFIG_LPC_SCH=m
+CONFIG_MFD_RDC321X=m
+CONFIG_MFD_JANZ_CMODIO=m
+CONFIG_MFD_VX855=m
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_VGA_SWITCHEROO is not set
+# CONFIG_DRM is not set
+CONFIG_STUB_POULSBO=m
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_INTEL_SS4200 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_OT200 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=y
+CONFIG_EDAC_MCE_INJ=m
+# CONFIG_EDAC_MM_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_FM3130=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_RV3029C2=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=m
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_MSM6242=m
+CONFIG_RTC_DRV_BQ4802=m
+CONFIG_RTC_DRV_RP5C01=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_MID_DMAC=m
+# CONFIG_INTEL_IOATDMA is not set
+CONFIG_TIMB_DMA=m
+CONFIG_PCH_DMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_UIO_NETX=m
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_MMIO=m
+
+#
+# Microsoft Hyper-V guest support
+#
+# CONFIG_HYPERV is not set
+CONFIG_STAGING=y
+# CONFIG_ET131X is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_RTS_PSTOR is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_DX_SEP is not set
+# CONFIG_IIO is not set
+CONFIG_XVMALLOC=y
+CONFIG_ZRAM=m
+# CONFIG_ZRAM_DEBUG is not set
+CONFIG_ZCACHE=m
+# CONFIG_FB_SM7XX is not set
+# CONFIG_CRYSTALHD is not set
+# CONFIG_FB_XGI is not set
+# CONFIG_ACPI_QUICKSTART is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+CONFIG_INTEL_MEI=m
+# CONFIG_STAGING_MEDIA is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACERHDF is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_FUJITSU_TABLET is not set
+# CONFIG_AMILO_RFKILL is not set
+# CONFIG_HP_ACCEL is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_IDEAPAD_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_ACPI_TOSHIBA is not set
+# CONFIG_TOSHIBA_BT_RFKILL is not set
+# CONFIG_ACPI_CMPC is not set
+# CONFIG_INTEL_IPS is not set
+# CONFIG_IBM_RTL is not set
+# CONFIG_XO15_EBOOK is not set
+# CONFIG_SAMSUNG_LAPTOP is not set
+# CONFIG_INTEL_OAKTRAIL is not set
+# CONFIG_SAMSUNG_Q10 is not set
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
+CONFIG_AMD_IOMMU_V2=m
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+CONFIG_INTEL_IOMMU_DEFAULT_ON=y
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y
+CONFIG_IRQ_REMAP=y
+# CONFIG_VIRT_DRIVERS is not set
+# CONFIG_PM_DEVFREQ is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=m
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+CONFIG_NILFS2_FS=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_DEBUG=y
+CONFIG_QUOTA_TREE=m
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+# CONFIG_FSCACHE_DEBUG is not set
+CONFIG_FSCACHE_OBJECT_LIST=y
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_PSTORE=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_PNFS_FILE_LAYOUT=m
+CONFIG_PNFS_BLOCK=m
+CONFIG_PNFS_OBJLAYOUT=m
+# CONFIG_NFS_FSCACHE is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BACKCHANNEL=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_CEPH_FS=m
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_DFS_UPCALL=y
+# CONFIG_CIFS_FSCACHE is not set
+CONFIG_CIFS_ACL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FSCACHE is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KPROBE_EVENT=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+# CONFIG_KMEMCHECK is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_X86_PTDUMP is not set
+CONFIG_DEBUG_RODATA=y
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
+CONFIG_DEBUG_NX_TEST=m
+# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+# CONFIG_X86_DECODER_SELFTEST is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+CONFIG_DEBUG_BOOT_PARAMS=y
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_INTEL_TXT is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+# CONFIG_IMA is not set
+CONFIG_EVM=y
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CRC32C_INTEL=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_SSSE3=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_AES_X86_64=m
+CONFIG_CRYPTO_AES_NI_INTEL=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_BLOWFISH_COMMON=m
+CONFIG_CRYPTO_BLOWFISH_X86_64=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SALSA20_X86_64=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_TWOFISH_X86_64=m
+CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_HAVE_KVM=y
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_CRC8=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_TEST=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_LRU_CACHE=m
+CONFIG_AVERAGE=y
+CONFIG_CORDIC=m
#-----------------------------------------------------------
# Strict checking of overlay definitions
#
-# Set either to "yes" or "no". If "no" layman will issue
-# warnings if an overlay definition is missing either
-# description or contact information.
+# The nocheck option is a bit confusing, for historical reasons.
+# Hopefully this description eases the double negation trouble:
+#
+# nocheck : yes
+# - Accepts completene overlay entries without warnings
+# - Lists overlays of type foo (say Git) even with no foo installed
+#
+# nocheck : no
+# - Checks overlay entries for missing description or contact
+# information and issue warnings as needed
+# - Hides overlays of type foo (say Git) if foo not not installed
#
nocheck : yes
# ld.so.conf autogenerated by env-update; make all changes to
# contents of /etc/env.d directory
-/usr/local/lib
-include ld.so.conf.d/*.conf
/lib64
/usr/lib64
/usr/local/lib64
/usr/local/lib32
/lib
/usr/lib
-/opt/cuda/lib64
+/usr/local/lib
+include ld.so.conf.d/*.conf
+/usr/lib/postgresql
+/usr/lib64/postgresql
+/usr/lib64/postgresql-9.1/lib64/
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/32
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/32
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.6/32
-/usr/lib/gcc/x86_64-pc-linux-gnu/4.4.6
# This is a good place to load any misc programs
# on startup (use &>/dev/null to hide output)
-echo "Setze Standard-Route IPv6 via fe80::1 dev eth0"
-/sbin/ip -6 route add default via fe80::1 dev eth0
+#echo "Setze Standard-Route IPv6 via fe80::1 dev eth0"
+#/sbin/ip -6 route add default via fe80::1 dev eth0
#/sbin/ip -6 route add "2a01:238:4225:6e00::/56" dev lo
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.06.54.26; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# Apache2 logrotate snipet for Gentoo Linux
-# Contributes by Chuck Short
-#
-#/var/log/apache2/*log {
-# missingok
-# notifempty
-# sharedscripts
-# postrotate
-# /etc/init.d/apache2 reload > /dev/null 2>&1 || true
-# endscript
-#}
-
-script apache2-reload
- /etc/init.d/apache2 reload >/dev/null || true
-endscript
-
-#rotate 10
-daily
-
-/var/log/apache2/*log {
- size 4m
- olddir /var/log/apache2/%Y-%m
- postrotate apache2-reload
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d4 16
-d21 3
-a23 6
- missingok
- notifempty
- sharedscripts
- postrotate
- /etc/init.d/apache2 reload > /dev/null 2>&1 || true
- endscript
-d25 2
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.19.01.48; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@/var/log/clamav/clamd.log {
- missingok
- weekly
- size 1m
- postrotate
- /etc/init.d/clamd logfix
- /bin/kill -HUP `cat /var/run/clamav/clamd.pid 2> /dev/null` 2>/dev/null || true
- endscript
-}
-
-/var/log/clamav/freshclam.log {
- missingok
- weekly
- size 1m
- postrotate
- /etc/init.d/clamd logfix
- /bin/kill -HUP `cat /var/run/clamav/freshclam.pid 2> /dev/null` 2>/dev/null || true
- endscript
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d3 2
-d13 2
-d20 2
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.30.21.18.51; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id: elog-save-summary 7609 2007-08-15 04:37:36Z zmedico $
-# Rotate the log created by the save_summary elog module.
-
-/var/log/portage/elog/summary.log {
- missingok
- nocreate
- delaycompress
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d3 1
-d11 2
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.30.06.29.11; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/logrotate.mysql,v 1.1 2007/01/12 16:54:20 chtekk Exp $
-
-/var/log/mysql/mysql.err /var/log/mysql/mysql.log /var/log/mysql/mysqld.err {
-monthly
-create 660 mysql mysql
-notifempty
-size 5M
-sharedscripts
-missingok
-postrotate
-/bin/kill -HUP `cat /var/run/mysqld/mysqld.pid`
-endscript
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d16 2
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.05.27.10.53.14; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@
-script named-reload
- /usr/sbin/rndc reload >/dev/null || true
-endscript
-
-/var/log/named/complete-debug.log /var/log/named/debug.log /var/log/named/query.log {
- daily
- olddir /var/log/named/%Y-%m
- size 4M
- maxage 6m
- notifempty
- missingok
- postrotate named-reload
-}
-
-/var/log/named/named.log {
- weekly
- olddir /var/log/named/%Y-%m
- size 1M
- maxage 2y
- notifempty
- missingok
- postrotate named-reload
-}
-
-
-# vim: ts=4 filetype=conf
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.30.16.27.03; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@/var/log/rsync.log {
- compress
- maxage 365
- rotate 7
- size=+1024k
- notifempty
- missingok
- copytruncate
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d10 2
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.30.21.54.44; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.logrotate,v 1.3 2008/10/15 20:46:12 mr_bones_ Exp $
-#
-# Syslog-ng logrotate snippet for Gentoo Linux
-# contributed by Michael Sterrett
-#
-
-#/var/log/messages {
-# missingok
-# sharedscripts
-# postrotate
-# /etc/init.d/syslog-ng reload > /dev/null 2>&1 || true
-# endscript
-#}
-
-script syslog-reload
- /etc/init.d/syslog-ng reload >/dev/null || true
-endscript
-
-/var/log/messages {
- daily
- olddir /var/log/.old/%Y-%m
- size 1024K
- postrotate syslog-reload
-}
-
-/var/log/syslog.d/* {
- daily
- olddir /var/log/syslog.d/.old/%Y-%m
- size 1024K
- postrotate syslog-reload
- maxage 1y
-}
-
-/var/log/debug.log {
- daily
- olddir /var/log/.old/%Y-%m
- size 4M
- postrotate syslog-reload
- maxage 6m
-}
-
-/var/log/mail/authdaemond /var/log/mail/amavis* /var/log/mail/imapd* /var/log/mail/pop3d* /var/log/mail/postgrey /var/log/mail/spam* {
- daily
- olddir /var/log/mail/.old/%Y-%m
- size 1024K
- postrotate syslog-reload
- maxage 1y
-}
-
-/var/log/mail/postfix/* {
- daily
- olddir /var/log/mail/.old/postfix/%Y-%m
- size 1024K
- postrotate syslog-reload
- maxage 1y
-}
-
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d7 12
-d20 4
-a23 5
- missingok
- sharedscripts
- postrotate
- /etc/init.d/syslog-ng reload > /dev/null 2>&1 || true
- endscript
-d25 35
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.03.24; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.30.16.29.33; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@#/var/log/ulogd.log /var/log/ulogd.syslogemu /var/log/ulogd.pktlog /var/log/ulogd.pcap {
-# missingok
-# sharedscripts
-# postrotate
-# /bin/killall -HUP ulogd 2> /dev/null || true
-# endscript
-#}
-
-/var/log/ulogd/*.log {
- daily
- maxage 2y
- rotate 999
- olddir /var/log/ulogd/%Y-%m
- size 4M
- sharedscripts
- postrotate
- #/etc/init.d/ulogd restart
- /bin/killall -HUP ulogd 2> /dev/null || true
- endscript
-}
-
-# vim: ts=4 filetype=conf
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d1 14
-a14 2
-/var/log/ulogd.log /var/log/ulogd.syslogemu /var/log/ulogd.pktlog /var/log/ulogd.pcap {
- missingok
-d17 2
-a18 1
- /bin/killall -HUP ulogd 2> /dev/null || true
-d21 2
-@
+++ /dev/null
-# Generated by LVM2 version 2.02.73(2) (2010-09-18): Tue Nov 30 00:58:00 2010
-
-contents = "Text Format Volume Group"
-version = 1
-
-description = "Created *before* executing '/sbin/vgscan --mknodes --config 'global { locking_dir = \"/dev/.lvm\" }''"
-
-creation_host = "(none)" # Linux (none) 2.6.34-gentoo-r12 #1 SMP Mon Nov 29 18:31:06 CET 2010 x86_64
-creation_time = 1291075080 # Tue Nov 30 00:58:00 2010
-
-vg0 {
- id = "UflbwM-FGlw-qFqq-1b6T-Uw2G-AAdY-M94ilh"
- seqno = 10
- status = ["RESIZEABLE", "READ", "WRITE"]
- flags = []
- extent_size = 8192 # 4 Megabytes
- max_lv = 0
- max_pv = 0
- metadata_copies = 0
-
- physical_volumes {
-
- pv0 {
- id = "k3351o-llEC-DnzL-mbrw-m3kb-mvv0-5mIRfc"
- device = "/dev/md5" # Hint only
-
- status = ["ALLOCATABLE"]
- flags = []
- dev_size = 957313152 # 456.482 Gigabytes
- pe_start = 384
- pe_count = 116859 # 456.48 Gigabytes
- }
- }
-
- logical_volumes {
-
- tmp {
- id = "1bbUbK-jKNY-dbqm-U0T0-OKff-h5Ed-NtK8fh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 512 # 2 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 0
- ]
- }
- }
-
- usr {
- id = "QdCiqc-WAxV-qFyC-808H-tdyt-xdEf-Qbfzv2"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3072 # 12 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 512
- ]
- }
- }
-
- var {
- id = "nz4D5c-TcAH-O0iD-RSs7-0Cjg-rDSA-399f3S"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 3584
- ]
- }
- }
-
- opt {
- id = "vNtxlo-1SGL-LRmW-6Rcj-K2lv-SsWW-Mj76sq"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 7424
- ]
- }
- }
-
- home {
- id = "jQqaJP-Su48-lBZz-oVdu-HNru-6m3L-zXLgiz"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 25600 # 100 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 11264
- ]
- }
- }
-
- var_tmp {
- id = "MvBpIS-WHWz-HpzV-gTfI-yexq-Odbk-9gLkL8"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 36864
- ]
- }
- }
-
- backup {
- id = "oU4b0r-e0Qh-RsUg-n0m0-JAx2-T3is-UOXV7W"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 15360 # 60 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 39424
- ]
- }
- }
-
- portage {
- id = "7RV5kq-43Ep-eJil-3RSc-IQj5-Rjzp-CtLxfY"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 1280 # 5 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 54784
- ]
- }
- }
-
- distfiles {
- id = "RTdfBJ-rROm-3zao-FAjG-5iQT-kBPE-dJ43zh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 56064
- ]
- }
- }
- }
-}
+++ /dev/null
-# Generated by LVM2 version 2.02.73(2) (2010-09-18): Tue Nov 30 09:12:50 2010
-
-contents = "Text Format Volume Group"
-version = 1
-
-description = "Created *before* executing 'lvcreate -L 50G -n www vg0'"
-
-creation_host = "helga" # Linux helga 2.6.34-gentoo-r12 #1 SMP Mon Nov 29 18:31:06 CET 2010 x86_64
-creation_time = 1291104770 # Tue Nov 30 09:12:50 2010
-
-vg0 {
- id = "UflbwM-FGlw-qFqq-1b6T-Uw2G-AAdY-M94ilh"
- seqno = 10
- status = ["RESIZEABLE", "READ", "WRITE"]
- flags = []
- extent_size = 8192 # 4 Megabytes
- max_lv = 0
- max_pv = 0
- metadata_copies = 0
-
- physical_volumes {
-
- pv0 {
- id = "k3351o-llEC-DnzL-mbrw-m3kb-mvv0-5mIRfc"
- device = "/dev/md5" # Hint only
-
- status = ["ALLOCATABLE"]
- flags = []
- dev_size = 957313152 # 456.482 Gigabytes
- pe_start = 384
- pe_count = 116859 # 456.48 Gigabytes
- }
- }
-
- logical_volumes {
-
- tmp {
- id = "1bbUbK-jKNY-dbqm-U0T0-OKff-h5Ed-NtK8fh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 512 # 2 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 0
- ]
- }
- }
-
- usr {
- id = "QdCiqc-WAxV-qFyC-808H-tdyt-xdEf-Qbfzv2"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3072 # 12 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 512
- ]
- }
- }
-
- var {
- id = "nz4D5c-TcAH-O0iD-RSs7-0Cjg-rDSA-399f3S"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 3584
- ]
- }
- }
-
- opt {
- id = "vNtxlo-1SGL-LRmW-6Rcj-K2lv-SsWW-Mj76sq"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 7424
- ]
- }
- }
-
- home {
- id = "jQqaJP-Su48-lBZz-oVdu-HNru-6m3L-zXLgiz"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 25600 # 100 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 11264
- ]
- }
- }
-
- var_tmp {
- id = "MvBpIS-WHWz-HpzV-gTfI-yexq-Odbk-9gLkL8"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 36864
- ]
- }
- }
-
- backup {
- id = "oU4b0r-e0Qh-RsUg-n0m0-JAx2-T3is-UOXV7W"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 15360 # 60 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 39424
- ]
- }
- }
-
- portage {
- id = "7RV5kq-43Ep-eJil-3RSc-IQj5-Rjzp-CtLxfY"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 1280 # 5 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 54784
- ]
- }
- }
-
- distfiles {
- id = "RTdfBJ-rROm-3zao-FAjG-5iQT-kBPE-dJ43zh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 56064
- ]
- }
- }
- }
-}
+++ /dev/null
-# Generated by LVM2 version 2.02.73(2) (2010-09-18): Tue Nov 30 09:13:04 2010
-
-contents = "Text Format Volume Group"
-version = 1
-
-description = "Created *before* executing 'lvcreate -L 10G -n var_lib vg0'"
-
-creation_host = "helga" # Linux helga 2.6.34-gentoo-r12 #1 SMP Mon Nov 29 18:31:06 CET 2010 x86_64
-creation_time = 1291104784 # Tue Nov 30 09:13:04 2010
-
-vg0 {
- id = "UflbwM-FGlw-qFqq-1b6T-Uw2G-AAdY-M94ilh"
- seqno = 11
- status = ["RESIZEABLE", "READ", "WRITE"]
- flags = []
- extent_size = 8192 # 4 Megabytes
- max_lv = 0
- max_pv = 0
- metadata_copies = 0
-
- physical_volumes {
-
- pv0 {
- id = "k3351o-llEC-DnzL-mbrw-m3kb-mvv0-5mIRfc"
- device = "/dev/md5" # Hint only
-
- status = ["ALLOCATABLE"]
- flags = []
- dev_size = 957313152 # 456.482 Gigabytes
- pe_start = 384
- pe_count = 116859 # 456.48 Gigabytes
- }
- }
-
- logical_volumes {
-
- tmp {
- id = "1bbUbK-jKNY-dbqm-U0T0-OKff-h5Ed-NtK8fh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 512 # 2 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 0
- ]
- }
- }
-
- usr {
- id = "QdCiqc-WAxV-qFyC-808H-tdyt-xdEf-Qbfzv2"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3072 # 12 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 512
- ]
- }
- }
-
- var {
- id = "nz4D5c-TcAH-O0iD-RSs7-0Cjg-rDSA-399f3S"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 3584
- ]
- }
- }
-
- opt {
- id = "vNtxlo-1SGL-LRmW-6Rcj-K2lv-SsWW-Mj76sq"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3840 # 15 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 7424
- ]
- }
- }
-
- home {
- id = "jQqaJP-Su48-lBZz-oVdu-HNru-6m3L-zXLgiz"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 25600 # 100 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 11264
- ]
- }
- }
-
- var_tmp {
- id = "MvBpIS-WHWz-HpzV-gTfI-yexq-Odbk-9gLkL8"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 36864
- ]
- }
- }
-
- backup {
- id = "oU4b0r-e0Qh-RsUg-n0m0-JAx2-T3is-UOXV7W"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 15360 # 60 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 39424
- ]
- }
- }
-
- portage {
- id = "7RV5kq-43Ep-eJil-3RSc-IQj5-Rjzp-CtLxfY"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 1280 # 5 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 54784
- ]
- }
- }
-
- distfiles {
- id = "RTdfBJ-rROm-3zao-FAjG-5iQT-kBPE-dJ43zh"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 2560 # 10 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 56064
- ]
- }
- }
-
- www {
- id = "G2ctQb-TMPR-o3Iw-CtCz-A8io-Tpqq-krXN6O"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 12800 # 50 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 58624
- ]
- }
- }
- }
-}
-# Generated by LVM2 version 2.02.73(2) (2010-09-18): Tue Nov 30 09:13:04 2010
+# Generated by LVM2 version 2.02.88(2) (2011-08-19): Mon Jul 23 22:40:34 2012
contents = "Text Format Volume Group"
version = 1
-description = "Created *after* executing 'lvcreate -L 10G -n var_lib vg0'"
+description = "Created *after* executing '/sbin/vgs --config 'global { locking_dir = \"/dev/.lvm\" }' -o vg_name --noheadings --nosuffix'"
-creation_host = "helga" # Linux helga 2.6.34-gentoo-r12 #1 SMP Mon Nov 29 18:31:06 CET 2010 x86_64
-creation_time = 1291104784 # Tue Nov 30 09:13:04 2010
+creation_host = "helga" # Linux helga 3.3.8-gentoo #1 SMP Mon Jul 23 18:48:18 CEST 2012 x86_64
+creation_time = 1343076034 # Mon Jul 23 22:40:34 2012
vg0 {
- id = "UflbwM-FGlw-qFqq-1b6T-Uw2G-AAdY-M94ilh"
- seqno = 12
+ id = "uSk9A3-x56m-iVOs-L8vy-MMPB-dyB8-P2B3wj"
+ seqno = 9
status = ["RESIZEABLE", "READ", "WRITE"]
flags = []
extent_size = 8192 # 4 Megabytes
physical_volumes {
pv0 {
- id = "k3351o-llEC-DnzL-mbrw-m3kb-mvv0-5mIRfc"
- device = "/dev/md5" # Hint only
+ id = "5Dj2to-z8Ns-6WMX-6jnk-bc9V-Rb24-X2pWS6"
+ device = "/dev/md127" # Hint only
status = ["ALLOCATABLE"]
flags = []
- dev_size = 957313152 # 456.482 Gigabytes
+ dev_size = 851153446 # 405.862 Gigabytes
pe_start = 384
- pe_count = 116859 # 456.48 Gigabytes
+ pe_count = 103900 # 405.859 Gigabytes
}
}
logical_volumes {
tmp {
- id = "1bbUbK-jKNY-dbqm-U0T0-OKff-h5Ed-NtK8fh"
+ id = "NvADy6-FMsi-1BjG-tCuj-XFCy-yoJ3-uAsXE9"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 512 # 2 Gigabytes
+ extent_count = 1024 # 4 Gigabytes
type = "striped"
stripe_count = 1 # linear
}
}
- usr {
- id = "QdCiqc-WAxV-qFyC-808H-tdyt-xdEf-Qbfzv2"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 3072 # 12 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 512
- ]
- }
- }
-
- var {
- id = "nz4D5c-TcAH-O0iD-RSs7-0Cjg-rDSA-399f3S"
+ home {
+ id = "k3xQ3K-GiiJ-0jPx-SiVq-JcYX-N0Lt-d99eZp"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 3840 # 15 Gigabytes
+ extent_count = 12800 # 50 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 3584
+ "pv0", 1024
]
}
}
- opt {
- id = "vNtxlo-1SGL-LRmW-6Rcj-K2lv-SsWW-Mj76sq"
+ portage {
+ id = "hhJum2-rfn8-Rhzw-skcg-33qV-JvrV-3peqTx"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 3840 # 15 Gigabytes
+ extent_count = 1024 # 4 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 7424
+ "pv0", 13824
]
}
}
- home {
- id = "jQqaJP-Su48-lBZz-oVdu-HNru-6m3L-zXLgiz"
+ distfiles {
+ id = "mbepTK-f1Yy-viQH-QCCL-Wb0G-Z3hR-1jYAlf"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 25600 # 100 Gigabytes
+ extent_count = 2560 # 10 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 11264
+ "pv0", 14848
]
}
}
var_tmp {
- id = "MvBpIS-WHWz-HpzV-gTfI-yexq-Odbk-9gLkL8"
+ id = "Kr2rqO-qi0q-A8Wr-8kEp-bl3V-14Hy-f9VZep"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
stripe_count = 1 # linear
stripes = [
- "pv0", 36864
- ]
- }
- }
-
- backup {
- id = "oU4b0r-e0Qh-RsUg-n0m0-JAx2-T3is-UOXV7W"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 15360 # 60 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 39424
- ]
- }
- }
-
- portage {
- id = "7RV5kq-43Ep-eJil-3RSc-IQj5-Rjzp-CtLxfY"
- status = ["READ", "WRITE", "VISIBLE"]
- flags = []
- segment_count = 1
-
- segment1 {
- start_extent = 0
- extent_count = 1280 # 5 Gigabytes
-
- type = "striped"
- stripe_count = 1 # linear
-
- stripes = [
- "pv0", 54784
+ "pv0", 17408
]
}
}
- distfiles {
- id = "RTdfBJ-rROm-3zao-FAjG-5iQT-kBPE-dJ43zh"
+ var_lib {
+ id = "xgCSsf-SEpC-iRjx-9wIF-GjDS-pXwi-U59YcI"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 2560 # 10 Gigabytes
+ extent_count = 12800 # 50 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 56064
+ "pv0", 19968
]
}
}
www {
- id = "G2ctQb-TMPR-o3Iw-CtCz-A8io-Tpqq-krXN6O"
+ id = "lVYuc0-043K-ET9u-H6X8-31jj-1xMG-hcGxpq"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 12800 # 50 Gigabytes
+ extent_count = 25600 # 100 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 58624
+ "pv0", 32768
]
}
}
- var_lib {
- id = "Uvg5NV-3h9X-YZpv-ouET-IGsD-SA4t-WQInlY"
+ backup {
+ id = "lQ6rLf-HUxx-f3oc-eTpG-9xeD-JrbI-aVU7tv"
status = ["READ", "WRITE", "VISIBLE"]
flags = []
segment_count = 1
segment1 {
start_extent = 0
- extent_count = 2560 # 10 Gigabytes
+ extent_count = 12800 # 50 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
- "pv0", 71424
+ "pv0", 58368
]
}
}
-a80ef8537b9f69ff3c2d935f0034bdcf
+67d7ee0747a3d3b3fc6a1095500ca754
--- /dev/null
+# Basic system aliases -- these MUST be present.
+MAILER-DAEMON: postmaster
+postmaster: root
+
+# General redirections for pseudo accounts.
+adm: root
+bin: root
+daemon: root
+exim: root
+lp: root
+mail: root
+named: root
+nobody: root
+postfix: root
+
+# Well-known aliases -- these should be filled in!
+# root:
+# operator:
+
+# Standard RFC2142 aliases
+abuse: postmaster
+ftp: root
+hostmaster: root
+news: usenet
+noc: root
+security: root
+usenet: root
+uucp: root
+webmaster: root
+www: webmaster
+
+# trap decode to catch security attacks
+# decode: /dev/null
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
-
CFLAGS="-O2 -pipe -march=opteron"
CXXFLAGS="${CFLAGS}"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
-USE="3dnow X acl apache2 audit bash-completion bazaar bzip2 caps cgi cvs curl \
- darcs djvu doc examples expat fam fastcgi fontconfig ftp gd gif git gmp gnome-keyring \
- gnutls gpg graphviz gs gsl gtk guile hscolour html icu idn imagemagick imap ipv6 ithreads \
- jadetex java javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua \
- lzma lzo maildir mailwrapper mercurial mmx mmxext modperl modplug motif mp3 mysql \
- nis odbc ogg openexr openldap pam pch pcre pdf perl pic png php python rar samba sasl \
- session smtp snmp soap spamassassin spell sqlite sqlite3 sse sse2 ssh \
- subversion svg syslog theora tiff tk truetype unicode vhosts vim-syntax \
- vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
+USE="3dnow X acl apache2 audit bash-completion bazaar bzip2 caps cgi curl cvs \
+ darcs djvu doc examples expat fam fastcgi fontconfig ftp gd gif git gmp \
+ gnome-keyring gnutls gpg graphviz gs gsl gtk guile hscolour html i18n \
+ icu idn imagemagick imap ipv6 ithreads jadetex java javascript jbig jpeg \
+ jpeg2k kerberos lasi ldap libwww lua lzma lzo maildir mailwrapper \
+ mercurial mmx mmxext mod modperl modplug motif mp3 mysql \
+ nis odbc ogg openexr openldap pam pch pcre pdf perl php pic png postgres \
+ postscript python rar samba sasl session smtp snmp soap spamassassin \
+ spell sqlite sqlite3 sse sse2 ssh subversion svg syslog theora tiff tk \
+ truetype unicode vhosts vim-syntax vorbis wmf x264 xattr xml xmlrpc xpm \
+ xsl xvid zlib"
+#USE="3dnow X acl apache2 audit bash-completion bazaar bzip2 caps cgi cvs curl \
+# darcs djvu doc examples expat fam fastcgi fontconfig ftp gd gif git gmp gnome-keyring \
+# gnutls gpg graphviz gs gsl gtk guile hscolour html icu idn imagemagick imap ipv6 ithreads \
+# jadetex java javascript jbig jpeg jpeg2k kerberos lasi ldap libwww lua \
+# lzma lzo maildir mailwrapper mercurial mmx mmxext modperl modplug motif mp3 mysql \
+# nis odbc ogg openexr openldap pam pch pcre pdf perl pic png php python rar samba sasl \
+# session smtp snmp soap spamassassin spell sqlite sqlite3 sse sse2 ssh \
+# subversion svg syslog theora tiff tk truetype unicode vhosts vim-syntax \
+# vorbis wmf x264 xattr xml xmlrpc xpm xsl xvid zlib"
+
I_KNOW_WHAT_I_AM_DOING=yes
#
# Compress cat pages
#
-COMPRESS /bin/bzip2
-COMPRESS_EXT .bz2
+COMPRESS /usr/bin/xz
+COMPRESS_EXT .xz
#
# Default manual sections (and order) to search if -S is not specified
# and the MANSECT environment variable is not set.
.lzma /usr/bin/unlzma -c -d
.z
.Z /bin/zcat
-.F /usr/bin/fcat
+.F
.Y
.xz /usr/bin/unxz -c
# and "program" lines to that monitoring can be started using
# mdadm --follow --scan & echo $! > /var/run/mdadm
# If the lines are not found, mdadm will exit quietly
-#MAILADDR root@mydomain.tld
+MAILADDR frank@brehm-online.com
#PROGRAM /usr/sbin/handle-mdadm-events
+
+ARRAY /dev/md0 UUID=b7a8f9c1:8286d56c:3d186b3c:53958f34
+ARRAY /dev/md1 UUID=b0ec76b7:d7abfcad:8b23e4b1:c398e955
+ARRAY /dev/md2 metadata=1.2 UUID=f4df350f:db2bcbff:6c11726f:a221fad0 name=helga.brehm-online.com:2
+ARRAY /dev/md3 metadata=1.2 UUID=845bd74a:ad0cbe0e:033b20d0:a9bd0ff5 name=helga.brehm-online.com:3
+
rootfs / rootfs rw 0 0
-/dev/root / ext3 rw,noatime,errors=continue,user_xattr,acl,barrier=1,data=writeback 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
-rc-svcdir /lib64/rc/init.d tmpfs rw,nosuid,nodev,noexec,relatime,size=1024k,mode=755 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
+udev /dev tmpfs rw,nosuid,relatime,size=10240k,mode=755 0 0
+devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
+/dev/md2 / ext3 rw,noatime,errors=continue,user_xattr,acl,barrier=1,data=writeback 0 0
+tmpfs /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
+rc-svcdir /lib64/rc/init.d tmpfs rw,nosuid,nodev,noexec,relatime,size=1024k,mode=755 0 0
debugfs /sys/kernel/debug debugfs rw,nosuid,nodev,noexec,relatime 0 0
cgroup_root /sys/fs/cgroup tmpfs rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755 0 0
cpuset /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cpu /sys/fs/cgroup/cpu cgroup rw,nosuid,nodev,noexec,relatime,cpu 0 0
cpuacct /sys/fs/cgroup/cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct 0 0
freezer /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
-udev /dev tmpfs rw,nosuid,relatime,size=10240k,mode=755 0 0
-devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
shm /dev/shm tmpfs rw,nosuid,nodev,noexec,relatime 0 0
/dev/mapper/vg0-tmp /tmp ext4 rw,noatime 0 0
-/dev/mapper/vg0-usr /usr ext4 rw,acl,user_xattr 0 0
-/dev/mapper/vg0-var /var ext4 rw,acl,user_xattr 0 0
-/dev/mapper/vg0-opt /opt ext4 rw,acl,user_xattr 0 0
-/dev/mapper/vg0-home /home ext4 rw,acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 0
+/dev/mapper/vg0-home /home ext4 rw,acl,user_xattr 0 0
/dev/mapper/vg0-var_tmp /var/tmp ext4 rw,noatime 0 0
/dev/mapper/vg0-www /var/www ext4 rw,acl,user_xattr 0 0
/dev/mapper/vg0-var_lib /var/lib ext4 rw,noatime,acl,user_xattr 0 0
/dev/mapper/vg0-backup /var/backup ext4 rw,noatime,acl,user_xattr 0 0
/dev/mapper/vg0-portage /usr/portage ext4 rw,noatime 0 0
/dev/mapper/vg0-distfiles /usr/portage/distfiles ext4 rw,noatime 0 0
+/dev/md1 /ubuntu ext3 ro,noatime,acl,user_xattr 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
-/dev/md2 /boot ext3 rw,noatime 0 0
+++ /dev/null
-head 1.5;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.5
-date 2010.11.30.08.33.13; author root; state Exp;
-branches;
-next 1.4;
-
-1.4
-date 2010.11.30.08.26.18; author root; state Exp;
-branches;
-next 1.3;
-
-1.3
-date 2010.11.30.06.46.14; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.05.27.20.00.10; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.26.01.55.34; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.5
-log
-@Checked in.
-@
-text
-@# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /etc/mysql/my.cnf,v 1.4 2010/11/30 08:26:18 root Exp $
-
-# The following options will be passed to all MySQL clients
-[client]
-#password = your_password
-port = 3306
-socket = /var/run/mysqld/mysqld.sock
-
-[mysql]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-prompt=MySQL \u@@\h:\d >\_
-
-[mysqladmin]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlcheck]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqldump]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlimport]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlshow]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[myisamchk]
-character-sets-dir=/usr/share/mysql/charsets
-
-[myisampack]
-character-sets-dir=/usr/share/mysql/charsets
-
-# use [safe_mysqld] with mysql-3
-[mysqld_safe]
-err-log = /var/log/mysql/mysql.err
-
-# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
-[mysqld]
-character-set-server = utf8
-#default-character-set = utf8
-user = mysql
-port = 3306
-socket = /var/run/mysqld/mysqld.sock
-pid-file = /var/run/mysqld/mysqld.pid
-log-error = /var/log/mysql/mysqld.err
-basedir = /usr
-datadir = /var/lib/mysql
-skip-external-locking
-key_buffer = 32M
-max_allowed_packet = 4M
-table_cache = 64
-sort_buffer_size = 2M
-net_buffer_length = 8K
-read_buffer_size = 2M
-read_rnd_buffer_size = 4M
-myisam_sort_buffer_size = 32M
-#language = /usr/share/mysql/english
-language = /usr/share/mysql/german
-
-# security:
-# using "localhost" in connects uses sockets by default
-# skip-networking
-#bind-address = 127.0.0.1
-
-#log-bin = helga-mysql-bin
-server-id = 2
-
-#auto_increment_increment = 2
-#auto_increment_offset = 2
-
-#master-host = sarah.brehm-online.com
-#master-port = 3306
-#master-user = replication
-#master-password = uhu
-#master-connect-retry = 60
-#report-host = helga.brehm-online.com
-
-# point the following paths to different dedicated disks
-tmpdir = /tmp/
-#log-update = /path-to-dedicated-directory/hostname
-
-# you need the debug USE flag enabled to use the following directives,
-# if needed, uncomment them, start the server and issue
-# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
-# this will show you *exactly* what's happening in your server ;)
-
-#log = /tmp/mysqld.sql
-#gdb
-#debug = d:t:i:o,/tmp/mysqld.trace
-#one-thread
-
-# uncomment the following directives if you are using BDB tables
-#bdb_cache_size = 4M
-#bdb_max_lock = 10000
-
-# the following is the InnoDB configuration
-# if you wish to disable innodb instead
-# uncomment just the next line
-#skip-innodb
-#
-# the rest of the innodb config follows:
-# don't eat too much memory, we're trying to be safe on 64Mb boxes
-# you might want to bump this up a bit on boxes with more RAM
-innodb_buffer_pool_size = 64M
-# this is the default, increase it if you have lots of tables
-innodb_additional_mem_pool_size = 4M
-#
-# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(
-# and upstream wants things to be under /var/lib/mysql/, so that's the route
-# we have to take for the moment
-#innodb_data_home_dir = /var/lib/mysql/
-#innodb_log_arch_dir = /var/lib/mysql/
-#innodb_log_group_home_dir = /var/lib/mysql/
-# you may wish to change this size to be more suitable for your system
-# the max is there to avoid run-away growth on your machine
-innodb_data_file_path = ibdata1:10M:autoextend:max:128M
-# we keep this at around 25% of of innodb_buffer_pool_size
-# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)
-innodb_log_file_size = 5M
-# this is the default, increase it if you have very large transactions going on
-innodb_log_buffer_size = 8M
-# this is the default and won't hurt you
-# you shouldn't need to tweak it
-innodb_log_files_in_group=2
-# see the innodb config docs, the other options are not always safe
-innodb_flush_log_at_trx_commit = 1
-innodb_lock_wait_timeout = 50
-innodb_file_per_table
-sync_binlog = 1
-
-[mysqldump]
-quick
-max_allowed_packet = 64M
-
-[mysql]
-# uncomment the next directive if you are not familiar with SQL
-#safe-updates
-
-[isamchk]
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-
-[myisamchk]
-key_buffer = 40M
-sort_buffer_size = 40M
-read_buffer = 4M
-write_buffer = 4M
-
-[mysqlhotcopy]
-interactive-timeout
-@
-
-
-1.4
-log
-@Checked in.
-@
-text
-@d2 1
-a2 1
-# $Header: /etc/mysql/my.cnf,v 1.2 2010/05/27 20:00:10 root Exp $
-d48 1
-a48 1
-default-character-set = utf8
-d112 1
-a112 1
-innodb_buffer_pool_size = 64
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@d2 1
-a2 1
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $
-d13 1
-d48 1
-d57 2
-a58 2
-key_buffer = 16M
-max_allowed_packet = 1M
-d60 1
-a60 1
-sort_buffer_size = 512K
-d62 5
-a66 4
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-language = /usr/share/mysql/english
-d71 1
-a71 1
-bind-address = 127.0.0.1
-d73 12
-a84 2
-log-bin
-server-id = 1
-d112 1
-a112 1
-innodb_buffer_pool_size = 16M
-d114 1
-a114 1
-innodb_additional_mem_pool_size = 2M
-d137 1
-d141 1
-a141 1
-max_allowed_packet = 16M
-d148 1
-a148 1
-key_buffer = 20M
-d154 4
-a157 4
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d2 1
-a2 1
-# $Header: /etc/mysql/my.cnf,v 1.1 2010/05/26 01:55:34 root Exp $
-a12 1
-prompt=MySQL \u@@\h:\d >\_
-a46 1
-default-character-set = utf8
-d55 2
-a56 2
-key_buffer = 32M
-max_allowed_packet = 4M
-d58 1
-a58 1
-sort_buffer_size = 2M
-d60 4
-a63 5
-read_buffer_size = 2M
-read_rnd_buffer_size = 4M
-myisam_sort_buffer_size = 32M
-#language = /usr/share/mysql/english
-language = /usr/share/mysql/german
-d68 1
-a68 1
-#bind-address = 127.0.0.1
-d70 2
-a71 12
-log-bin = helga-mysql-bin
-server-id = 2
-
-auto_increment_increment = 2
-auto_increment_offset = 2
-
-master-host = sarah.brehm-online.com
-master-port = 3306
-master-user = replication
-master-password = uhu
-master-connect-retry = 60
-report-host = helga.brehm-online.com
-d99 1
-a99 1
-innodb_buffer_pool_size = 64
-d101 1
-a101 1
-innodb_additional_mem_pool_size = 4M
-a123 1
-sync_binlog = 1
-d127 1
-a127 1
-max_allowed_packet = 64M
-d134 1
-a134 1
-key_buffer = 20M
-d140 4
-a143 4
-key_buffer = 40M
-sort_buffer_size = 40M
-read_buffer = 4M
-write_buffer = 4M
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d2 1
-a2 1
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $
-d13 1
-d48 1
-d57 2
-a58 2
-key_buffer = 16M
-max_allowed_packet = 1M
-d60 1
-a60 1
-sort_buffer_size = 512K
-d62 5
-a66 4
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-language = /usr/share/mysql/english
-d71 1
-a71 1
-bind-address = 127.0.0.1
-d73 12
-a84 2
-log-bin
-server-id = 1
-d112 1
-a112 1
-innodb_buffer_pool_size = 16M
-d114 1
-a114 1
-innodb_additional_mem_pool_size = 2M
-d137 1
-d141 1
-a141 1
-max_allowed_packet = 16M
-d148 1
-a148 1
-key_buffer = 20M
-d154 4
-a157 4
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.11.30.08.22.44; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /etc/mysql/my.cnf,v 1.3 2010/11/30 06:46:14 root Exp $
-
-# The following options will be passed to all MySQL clients
-[client]
-#password = your_password
-port = 3306
-socket = /var/run/mysqld/mysqld.sock
-
-[mysql]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqladmin]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlcheck]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqldump]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlimport]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[mysqlshow]
-character-sets-dir=/usr/share/mysql/charsets
-default-character-set=utf8
-
-[myisamchk]
-character-sets-dir=/usr/share/mysql/charsets
-
-[myisampack]
-character-sets-dir=/usr/share/mysql/charsets
-
-# use [safe_mysqld] with mysql-3
-[mysqld_safe]
-err-log = /var/log/mysql/mysql.err
-
-# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
-[mysqld]
-character-set-server = utf8
-user = mysql
-port = 3306
-socket = /var/run/mysqld/mysqld.sock
-pid-file = /var/run/mysqld/mysqld.pid
-log-error = /var/log/mysql/mysqld.err
-basedir = /usr
-datadir = /var/lib/mysql
-skip-external-locking
-key_buffer = 16M
-max_allowed_packet = 1M
-table_cache = 64
-sort_buffer_size = 512K
-net_buffer_length = 8K
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-language = /usr/share/mysql/english
-
-# security:
-# using "localhost" in connects uses sockets by default
-# skip-networking
-bind-address = 127.0.0.1
-
-log-bin
-server-id = 1
-
-# point the following paths to different dedicated disks
-tmpdir = /tmp/
-#log-update = /path-to-dedicated-directory/hostname
-
-# you need the debug USE flag enabled to use the following directives,
-# if needed, uncomment them, start the server and issue
-# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
-# this will show you *exactly* what's happening in your server ;)
-
-#log = /tmp/mysqld.sql
-#gdb
-#debug = d:t:i:o,/tmp/mysqld.trace
-#one-thread
-
-# uncomment the following directives if you are using BDB tables
-#bdb_cache_size = 4M
-#bdb_max_lock = 10000
-
-# the following is the InnoDB configuration
-# if you wish to disable innodb instead
-# uncomment just the next line
-#skip-innodb
-#
-# the rest of the innodb config follows:
-# don't eat too much memory, we're trying to be safe on 64Mb boxes
-# you might want to bump this up a bit on boxes with more RAM
-innodb_buffer_pool_size = 16M
-# this is the default, increase it if you have lots of tables
-innodb_additional_mem_pool_size = 2M
-#
-# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(
-# and upstream wants things to be under /var/lib/mysql/, so that's the route
-# we have to take for the moment
-#innodb_data_home_dir = /var/lib/mysql/
-#innodb_log_arch_dir = /var/lib/mysql/
-#innodb_log_group_home_dir = /var/lib/mysql/
-# you may wish to change this size to be more suitable for your system
-# the max is there to avoid run-away growth on your machine
-innodb_data_file_path = ibdata1:10M:autoextend:max:128M
-# we keep this at around 25% of of innodb_buffer_pool_size
-# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)
-innodb_log_file_size = 5M
-# this is the default, increase it if you have very large transactions going on
-innodb_log_buffer_size = 8M
-# this is the default and won't hurt you
-# you shouldn't need to tweak it
-innodb_log_files_in_group=2
-# see the innodb config docs, the other options are not always safe
-innodb_flush_log_at_trx_commit = 1
-innodb_lock_wait_timeout = 50
-innodb_file_per_table
-
-[mysqldump]
-quick
-max_allowed_packet = 16M
-
-[mysql]
-# uncomment the next directive if you are not familiar with SQL
-#safe-updates
-
-[isamchk]
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-
-[myisamchk]
-key_buffer = 20M
-sort_buffer_size = 20M
-read_buffer = 2M
-write_buffer = 2M
-
-[mysqlhotcopy]
-interactive-timeout
-@
--- /dev/null
+#####################################################################
+# NDO2DB DAEMON CONFIG FILE
+#
+# Last Modified: 01-02-2009
+#####################################################################
+
+
+
+# LOCK FILE
+# This is the lockfile that NDO2DB will use to store its PID number
+# in when it is running in daemon mode.
+
+lock_file=/var/lib/ndo2db.lock
+
+
+
+# USER/GROUP PRIVILIGES
+# These options determine the user/group that the daemon should run as.
+# You can specify a number (uid/gid) or a name for either option.
+
+ndo2db_user=nagios
+ndo2db_group=nagios
+
+
+
+# SOCKET TYPE
+# This option determines what type of socket the daemon will create
+# an accept connections from.
+# Value:
+# unix = Unix domain socket (default)
+# tcp = TCP socket
+
+socket_type=unix
+#socket_type=tcp
+
+
+
+# SOCKET NAME
+# This option determines the name and path of the UNIX domain
+# socket that the daemon will create and accept connections from.
+# This option is only valid if the socket type specified above
+# is "unix".
+
+socket_name=/var/lib/ndo.sock
+
+
+
+# TCP PORT
+# This option determines what port the daemon will listen for
+# connections on. This option is only vlaid if the socket type
+# specified above is "tcp".
+
+tcp_port=5668
+
+
+
+# ENCRYPTION
+# This option determines if the ndo2db daemon will accept SSL to encrypt the
+# network traffic between module and ndo2db daemon.
+# Both sides have to enable this feature which depends on SSL Libraries
+# like openssl or kerberos
+# This option is only valid if the output type
+# option specified above is "tcpsocket".
+#
+# A value of '1' will enable this feature
+
+use_ssl=0
+
+
+
+# DATABASE SERVER TYPE
+# This option determines what type of DB server the daemon should
+# connect to.
+# Values:
+# mysql = MySQL
+# pgsql = PostgreSQL
+
+db_servertype=mysql
+
+
+
+# DATABASE HOST
+# This option specifies what host the DB server is running on.
+
+db_host=localhost
+
+
+
+# DATABASE PORT
+# This option specifies the port that the DB server is running on.
+# Values:
+# 3306 = Default MySQL port
+# 5432 = Default PostgreSQL port
+
+db_port=3306
+
+
+
+# DATABASE NAME
+# This option specifies the name of the database that should be used.
+
+db_name=nagios
+
+
+
+# DATABASE TABLE PREFIX
+# Determines the prefix (if any) that should be prepended to table names.
+# If you modify the table prefix, you'll need to modify the SQL script for
+# creating the database!
+
+db_prefix=nagios_
+
+
+
+# DATABASE USERNAME/PASSWORD
+# This is the username/password that will be used to authenticate to the DB.
+# The user needs at least SELECT, INSERT, UPDATE, and DELETE privileges on
+# the database.
+
+db_user=ndouser
+db_pass=ndopassword
+
+
+
+## TABLE TRIMMING OPTIONS
+# Several database tables containing Nagios event data can become quite large
+# over time. Most admins will want to trim these tables and keep only a
+# certain amount of data in them. The options below are used to specify the
+# age (in MINUTES) that data should be allowd to remain in various tables
+# before it is deleted. Using a value of zero (0) for any value means that
+# that particular table should NOT be automatically trimmed.
+
+# Keep timed events for 24 hours
+max_timedevents_age=1440
+
+# Keep system commands for 1 week
+max_systemcommands_age=10080
+
+# Keep service checks for 1 week
+max_servicechecks_age=10080
+
+# Keep host checks for 1 week
+max_hostchecks_age=10080
+
+# Keep event handlers for 31 days
+max_eventhandlers_age=44640
+
+# Keep external commands for 31 days
+max_externalcommands_age=44640
+
+
+
+
+# DEBUG LEVEL
+# This option determines how much (if any) debugging information will
+# be written to the debug file. OR values together to log multiple
+# types of information.
+# Values: -1 = Everything
+# 0 = Nothing
+# 1 = Process info
+# 2 = SQL queries
+
+debug_level=0
+
+
+
+# DEBUG VERBOSITY
+# This option determines how verbose the debug log out will be.
+# Values: 0 = Brief output
+# 1 = More detailed
+# 2 = Very detailed
+
+debug_verbosity=1
+
+
+
+# DEBUG FILE
+# This option determines where the daemon should write debugging information.
+
+debug_file=/var/lib/ndo2db.debug
+
+
+
+# MAX DEBUG FILE SIZE
+# This option determines the maximum size (in bytes) of the debug file. If
+# the file grows larger than this size, it will be renamed with a .old
+# extension. If a file already exists with a .old extension it will
+# automatically be deleted. This helps ensure your disk space usage doesn't
+# get out of control when debugging.
+
+max_debug_file_size=1000000
+
--- /dev/null
+#####################################################################
+# NDOMOD CONFIG FILE
+#
+# Last Modified: 09-05-2007
+#####################################################################
+
+
+# INSTANCE NAME
+# This option identifies the "name" associated with this particular
+# instance of Nagios and is used to seperate data coming from multiple
+# instances. Defaults to 'default' (without quotes).
+
+instance_name=default
+
+
+
+# OUTPUT TYPE
+# This option determines what type of output sink the NDO NEB module
+# should use for data output. Valid options include:
+# file = standard text file
+# tcpsocket = TCP socket
+# unixsocket = UNIX domain socket (default)
+
+#output_type=file
+#output_type=tcpsocket
+output_type=unixsocket
+
+
+
+# OUTPUT
+# This option determines the name and path of the file or UNIX domain
+# socket to which output will be sent if the output type option specified
+# above is "file" or "unixsocket", respectively. If the output type
+# option is "tcpsocket", this option is used to specify the IP address
+# of fully qualified domain name of the host that the module should
+# connect to for sending output.
+
+#output=/var/lib/ndo.dat
+#output=127.0.0.1
+output=/var/lib/ndo.sock
+
+
+
+# TCP PORT
+# This option determines what port the module will connect to in
+# order to send output. This option is only valid if the output type
+# option specified above is "tcpsocket".
+
+tcp_port=5668
+
+
+
+# ENCRYPTION
+# This option determines if the module will use SSL to encrypt the
+# network traffic between module and ndo2db daemon.
+# Both sides have to enable this feature which depends on SSL Libraries
+# like openssl or kerberos
+# This option is only valid if the output type
+# option specified above is "tcpsocket".
+#
+# A value of '1' will enable this feature
+
+use_ssl=0
+
+
+
+# OUTPUT BUFFER
+# This option determines the size of the output buffer, which will help
+# prevent data from getting lost if there is a temporary disconnect from
+# the data sink. The number of items specified here is the number of
+# lines (each of variable size) of output that will be buffered.
+
+output_buffer_items=5000
+
+
+
+# BUFFER FILE
+# This option is used to specify a file which will be used to store the
+# contents of buffered data which could not be sent to the NDO2DB daemon
+# before Nagios shuts down. Prior to shutting down, the NDO NEB module
+# will write all buffered data to this file for later processing. When
+# Nagios (re)starts, the NDO NEB module will read the contents of this
+# file and send it to the NDO2DB daemon for processing.
+
+buffer_file=/var/lib/ndomod.tmp
+
+
+
+# FILE ROTATION INTERVAL
+# This option determines how often (in seconds) the output file is
+# rotated by Nagios. File rotation is handled by Nagios by executing
+# the command defined by the file_rotation_command option. This
+# option has no effect if the output_type option is a socket.
+
+file_rotation_interval=14400
+
+
+
+# FILE ROTATION COMMAND
+# This option specified the command (as defined in Nagios) that is
+# used to rotate the output file at the interval specified by the
+# file_rotation_interval option. This option has no effect if the
+# output_type option is a socket.
+#
+# See the file 'misccommands.cfg' for an example command definition
+# that you can use to rotate the log file.
+
+#file_rotation_command=rotate_ndo_log
+
+
+
+# FILE ROTATION TIMEOUT
+# This option specified the maximum number of seconds that the file
+# rotation command should be allowed to run before being prematurely
+# terminated.
+
+file_rotation_timeout=60
+
+
+
+# RECONNECT INTERVAL
+# This option determines how often (in seconds) that the NDO NEB
+# module will attempt to re-connect to the output file or socket if
+# a connection to it is lost.
+
+reconnect_interval=15
+
+
+
+# RECONNECT WARNING INTERVAL
+# This option determines how often (in seconds) a warning message will
+# be logged to the Nagios log file if a connection to the output file
+# or socket cannot be re-established.
+
+reconnect_warning_interval=15
+#reconnect_warning_interval=900
+
+
+
+# DATA PROCESSING OPTION
+# This option determines what data the NDO NEB module will process.
+# Do not mess with this option unless you know what you're doing!!!!
+# Read the source code (include/ndbxtmod.h) to determine what values
+# to use here. Values from source code should be OR'ed to get the
+# value to use here. A value of -1 will cause all data to be processed.
+# Read the source code (include/ndomod.h) and look for "NDOMOD_PROCESS_"
+# to determine what values to use here. Values from source code should
+# be OR'ed to get the value to use here. A value of -1 will cause all
+# data to be processed.
+
+data_processing_options=-1
+
+
+
+# CONFIG OUTPUT OPTION
+# This option determines what types of configuration data the NDO
+# NEB module will dump from Nagios. Values can be OR'ed together.
+# Values:
+# 0 = Don't dump any configuration information
+# 1 = Dump only original config (from config files)
+# 2 = Dump config only after retained information has been restored
+# 3 = Dump both original and retained configuration
+
+config_output_options=2
+
--- /dev/null
+#############################################################################
+# Sample NRPE Config File
+# Written by: Ethan Galstad (nagios@nagios.org)
+#
+# Last Modified: 11-23-2007
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon. It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+# LOG FACILITY
+# The syslog facility that should be used for logging purposes.
+
+log_facility=daemon
+
+
+
+# PID FILE
+# The name of the file in which the NRPE daemon should write it's process ID
+# number. The file is only written if the NRPE daemon is started by the root
+# user and is running in standalone mode.
+
+pid_file=/var/run/nrpe/nrpe.pid
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.
+# You can either supply a username or a UID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.
+# You can either supply a group name or a GID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is an optional comma-delimited list of IP address or hostnames
+# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
+# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently
+# supported.
+#
+# Note: The daemon only does rudimentary checking of the client's IP
+# address. I would highly recommend adding entries in your /etc/hosts.allow
+# file to allow only the specified host to connect to the port
+# you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=127.0.0.1
+
+
+
+# COMMAND ARGUMENT PROCESSING
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments to commands that are executed. This option only works
+# if the daemon was configured with the --enable-command-args configure script
+# option.
+#
+# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow arguments, 1=allow command arguments
+
+dont_blame_nrpe=0
+
+
+
+# COMMAND PREFIX
+# This option allows you to prefix all commands with a user-defined string.
+# A space is automatically added between the specified prefix string and the
+# command line from the command definition.
+#
+# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
+# Usage scenario:
+# Execute restricted commmands using sudo. For this to work, you need to add
+# the nagios user to your /etc/sudoers. An example entry for alllowing
+# execution of the plugins from might be:
+#
+# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
+#
+# This lets the nagios user run all commands in that directory (and only them)
+# without asking for a password. If you do this, make sure you don't give
+# random users write access to that directory or its contents!
+
+# command_prefix=/usr/bin/sudo
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# allow plugins to finish executing before killing them off.
+
+command_timeout=60
+
+
+
+# CONNECTION TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# wait for a connection to be established before exiting. This is sometimes
+# seen where a network problem stops the SSL being established even though
+# all network sessions are connected. This causes the nrpe daemons to
+# accumulate, eating system resources. Do not set this too low.
+
+connection_timeout=300
+
+
+
+# WEEK RANDOM SEED OPTION
+# This directive allows you to use SSL even if your system does not have
+# a /dev/random or /dev/urandom (on purpose or because the necessary patches
+# were not applied). The random number generator will be seeded from a file
+# which is either a file pointed to by the environment valiable $RANDFILE
+# or $HOME/.rnd. If neither exists, the pseudo random number generator will
+# be initialized and a warning will be issued.
+# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
+
+#allow_weak_random_seed=1
+
+
+
+# INCLUDE CONFIG FILE
+# This directive allows you to include definitions from an external config file.
+
+#include=<somefile.cfg>
+
+
+
+# INCLUDE CONFIG DIRECTORY
+# This directive allows you to include definitions from config files (with a
+# .cfg extension) in one or more directories (with recursion).
+
+#include_dir=<somedirectory>
+#include_dir=<someotherdirectory>
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run. Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on! The examples below
+# assume that you have plugins installed in a /usr/local/nagios/libexec
+# directory. Also note that you will have to modify the definitions below
+# to match the argument format the plugins expect. Remember, these are
+# examples only!
+
+
+# The following examples use hardcoded command arguments...
+
+command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10
+command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
+command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200
+
+
+# The following examples allow user-supplied arguments and can
+# only be used if the NRPE daemon was compiled with support for
+# command arguments *AND* the dont_blame_nrpe directive in this
+# config file is set to '1'. This poses a potential security risk, so
+# make sure you read the SECURITY file before doing this.
+
+#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
+#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
+#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+#command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
--- /dev/null
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+# that you can reference in host, service, contact, and dependency
+# definitions.
+#
+# You don't need to keep timeperiods in a separate file from your other
+# object definitions. This has been done just to make things easier to
+# understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# TIME PERIODS
+#
+###############################################################################
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks,
+# notifications, etc. The classic "24x7" support nightmare. :-)
+define timeperiod{
+ timeperiod_name 24x7
+ alias 24 Hours A Day, 7 Days A Week
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+ }
+
+
+# 'workhours' timeperiod definition
+define timeperiod{
+ timeperiod_name workhours
+ alias Normal Work Hours
+ monday 09:00-17:00
+ tuesday 09:00-17:00
+ wednesday 09:00-17:00
+ thursday 09:00-17:00
+ friday 09:00-17:00
+ }
+
+
+# 'none' timeperiod definition
+define timeperiod{
+ timeperiod_name none
+ alias No Time Is A Good Time
+ }
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc. You probably don't want your pager
+# going off on New Year's. Although you're employer might... :-)
+define timeperiod{
+ name us-holidays
+ timeperiod_name us-holidays
+ alias U.S. Holidays
+
+ january 1 00:00-00:00 ; New Years
+ monday -1 may 00:00-00:00 ; Memorial Day (last Monday in May)
+ july 4 00:00-00:00 ; Independence Day
+ monday 1 september 00:00-00:00 ; Labor Day (first Monday in September)
+ thursday 4 november 00:00-00:00 ; Thanksgiving (4th Thursday in November)
+ december 25 00:00-00:00 ; Christmas
+ }
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+define timeperiod{
+ timeperiod_name 24x7_sans_holidays
+ alias 24x7 Sans Holidays
+
+ use us-holidays ; Get holiday exceptions from other timeperiod
+
+ sunday 00:00-24:00
+ monday 00:00-24:00
+ tuesday 00:00-24:00
+ wednesday 00:00-24:00
+ thursday 00:00-24:00
+ friday 00:00-24:00
+ saturday 00:00-24:00
+ }
+
--- /dev/null
+#
+# The network configuration file. This file is currently only used in
+# conjunction with the TI-RPC code in the libtirpc library.
+#
+# Entries consist of:
+#
+# <network_id> <semantics> <flags> <protofamily> <protoname> \
+# <device> <nametoaddr_libs>
+#
+# The <device> and <nametoaddr_libs> fields are always empty in this
+# implementation.
+#
+udp tpi_clts v inet udp - -
+tcp tpi_cots_ord v inet tcp - -
+udp6 tpi_clts v inet6 udp - -
+tcp6 tpi_cots_ord v inet6 tcp - -
+rawip tpi_raw - inet - - -
+local tpi_cots_ord - loopback - - -
+unix tpi_cots_ord - loopback - - -
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExEzAR
BgNVBAoTClNTTCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0aW5nIFB1cnBvc2Vz
IE9ubHkxFTATBgNVBAMTDGxvY2FsaG9zdCBDQTEdMBsGCSqGSIb3DQEJARYOcm9v
-dEBsb2NhbGhvc3QwHhcNMTAxMTMwMDYxOTIxWhcNMTIxMTI5MDYxOTIxWjCBpjEL
+dEBsb2NhbGhvc3QwHhcNMTIwNzIzMDkwNDA0WhcNMTQwNzIzMDkwNDA0WjCBpjEL
MAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRh
IEJhcmJhcmExEzARBgNVBAoTClNTTCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0
aW5nIFB1cnBvc2VzIE9ubHkxEjAQBgNVBAMTCWxvY2FsaG9zdDEdMBsGCSqGSIb3
DQEJARYOcm9vdEBsb2NhbGhvc3QwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGB
-AMkIfppB2/lqViayi38AY7fPF3aGucpFDxrcVy2lhj4ulFY9anldtE1yji5EnrQo
-utB4/3EPNta6TARazZwPJc68pEXCSKJNOwxr8BayD/C8s4+7Dbp6jPd478QF11Ct
-67Z1Ir/dV6sxE7ygAJBs9bGYpAWrVQvcEkfMJtpzvHKdAgMBAAEwDQYJKoZIhvcN
-AQEFBQADgYEAWXBBlzPp0DFDIoK/VwNBEYwD2qWuBCidH5DXsLB0Oje3W8ZGxd8K
-4dJQlQ/Hz/FQwV6Olior0dVCNf1atI1R/zgLXWXwr2rNqD6an9Io54SktnJo0180
-UOezPxxK+lIwydrlpHKtQucO0wIf9gpFCJTofXpek8Xl1GmQtsl4SYA=
+ALrIlOCYalKcIONkooeO0R2V0WI5KyTIeOqfEPs83FFtAAdRtNUe1g86ijWEbq5R
+1/M0U0J473akf+4lsM37GTa06zZmKY7pJfyrwqQ3grPhu3ZKu0lWd9zUuOTwXBKx
+MpXakuh6cqM0B3OZtSTPBNP60GTPAOnThQ5dQvzBImbXAgMBAAEwDQYJKoZIhvcN
+AQEFBQADgYEAjm9qlg3OidAANgGRx9ZFHj7yTCdld+UQKfOGR4y39BnNv2BZCr3A
+bQnYylXGRkRf1sDDg++KsfYjB/fs9RvPJVpN2ef2oqOiBi5PHlaGNje4X/x8UFQW
+ecNuSC6uDPNzQCzHZETKSuC6mM5dmwP/zunPqZKSE3XTh8f9Gj7Gb/U=
-----END CERTIFICATE-----
MRYwFAYDVQQHEw1TYW50YSBCYXJiYXJhMRMwEQYDVQQKEwpTU0wgU2VydmVyMSIw
IAYDVQQLExlGb3IgVGVzdGluZyBQdXJwb3NlcyBPbmx5MRIwEAYDVQQDEwlsb2Nh
bGhvc3QxHTAbBgkqhkiG9w0BCQEWDnJvb3RAbG9jYWxob3N0MIGfMA0GCSqGSIb3
-DQEBAQUAA4GNADCBiQKBgQDJCH6aQdv5alYmsot/AGO3zxd2hrnKRQ8a3FctpYY+
-LpRWPWp5XbRNco4uRJ60KLrQeP9xDzbWukwEWs2cDyXOvKRFwkiiTTsMa/AWsg/w
-vLOPuw26eoz3eO/EBddQreu2dSK/3VerMRO8oACQbPWxmKQFq1UL3BJHzCbac7xy
-nQIDAQABoAAwDQYJKoZIhvcNAQEFBQADgYEApDvEKMknyUCSYspWyLEEAi2VDRMD
-o8W8nIrBzmKr3gr1AyS217YTe6om5qGrg4rN6+EOH6aK9PpKEwDNNN8iPD5v37Ec
-eo6KB3TRGbbu8GoNbyhOzkJpbnVBdqA4nq8YQXy3+tYnWJ0GkiPYjs+HymkUSGxl
-S2Aj0iy0jSm5crM=
+DQEBAQUAA4GNADCBiQKBgQC6yJTgmGpSnCDjZKKHjtEdldFiOSskyHjqnxD7PNxR
+bQAHUbTVHtYPOoo1hG6uUdfzNFNCeO92pH/uJbDN+xk2tOs2ZimO6SX8q8KkN4Kz
+4bt2SrtJVnfc1Ljk8FwSsTKV2pLoenKjNAdzmbUkzwTT+tBkzwDp04UOXUL8wSJm
+1wIDAQABoAAwDQYJKoZIhvcNAQEFBQADgYEAfcQhC8awtpcS+QLgQEs6rNCczKv9
+ShUfIPbwWkf3yiEai1lA0ggqCGYjdNQFeJ8eRiYUtRTOYt3KOS+vPzmFcpXR1hm9
+uCHotTfMPLiAtC3oTKgBwdBAI4qwUmTOsGkw0BCMke1BkR9B/vD76blOlZEOqJqY
+6pnqQuUdGmqDGl0=
-----END CERTIFICATE REQUEST-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQDJCH6aQdv5alYmsot/AGO3zxd2hrnKRQ8a3FctpYY+LpRWPWp5
-XbRNco4uRJ60KLrQeP9xDzbWukwEWs2cDyXOvKRFwkiiTTsMa/AWsg/wvLOPuw26
-eoz3eO/EBddQreu2dSK/3VerMRO8oACQbPWxmKQFq1UL3BJHzCbac7xynQIDAQAB
-AoGBALJnh3L932mIpMvSx1j9z4Dfl8Ln7RlEEBOWVwd7TZcBX0LpXgQ21Dum3ebR
-nsXjH2bC+m4rQk9tJOj4bF+CUdmA5SFLWfM31HlqVDwEl8paZ4LTei6mcbMqbOte
-x9e/EEcQAPa1+OM6a6DNmB3tfvyCuINjz0jDH1vDjCoi6loBAkEA/l2+gOxiZlxC
-/A1Xf06YIe2I/grOintx2DH0nHt9oZJnfirU5B91C45tlQ/8BMtazwkurvzKkTS/
-ivnvN3rDeQJBAMpTDfqaTTRgOaGwAwzrZTOFLQB+Opnvdrbs5mO13v2GJKMgLBZg
-vJN2HiBPZLQZQHRv7FdS6vBm8GcHrGtIG0UCQQCHoHRzSZct/QO6YWLF/qIfdQgW
-bKy0Kh4JqJlE1pOmEuob27qn6B4Ai3DiiiNWaxeATOUXaLKZugZnk9x5OHwBAkEA
-lrgaYMZTnyHTrOxGyXgOErwx0v01wHjP8eM2ma7hZ/FnF5Ie5ai4sg060gzy0utA
-xbyezkp5tA6rJcVknyK/FQJAec5lFqa4HRXwEYTgJH9z1jjqFyIJCLiyuWkONPqL
-ADr7+AWgSSlojIDOW1UG12wAYBjuXYeSENfYWUtmY0JhhQ==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-----END RSA PRIVATE KEY-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQDJCH6aQdv5alYmsot/AGO3zxd2hrnKRQ8a3FctpYY+LpRWPWp5
-XbRNco4uRJ60KLrQeP9xDzbWukwEWs2cDyXOvKRFwkiiTTsMa/AWsg/wvLOPuw26
-eoz3eO/EBddQreu2dSK/3VerMRO8oACQbPWxmKQFq1UL3BJHzCbac7xynQIDAQAB
-AoGBALJnh3L932mIpMvSx1j9z4Dfl8Ln7RlEEBOWVwd7TZcBX0LpXgQ21Dum3ebR
-nsXjH2bC+m4rQk9tJOj4bF+CUdmA5SFLWfM31HlqVDwEl8paZ4LTei6mcbMqbOte
-x9e/EEcQAPa1+OM6a6DNmB3tfvyCuINjz0jDH1vDjCoi6loBAkEA/l2+gOxiZlxC
-/A1Xf06YIe2I/grOintx2DH0nHt9oZJnfirU5B91C45tlQ/8BMtazwkurvzKkTS/
-ivnvN3rDeQJBAMpTDfqaTTRgOaGwAwzrZTOFLQB+Opnvdrbs5mO13v2GJKMgLBZg
-vJN2HiBPZLQZQHRv7FdS6vBm8GcHrGtIG0UCQQCHoHRzSZct/QO6YWLF/qIfdQgW
-bKy0Kh4JqJlE1pOmEuob27qn6B4Ai3DiiiNWaxeATOUXaLKZugZnk9x5OHwBAkEA
-lrgaYMZTnyHTrOxGyXgOErwx0v01wHjP8eM2ma7hZ/FnF5Ie5ai4sg060gzy0utA
-xbyezkp5tA6rJcVknyK/FQJAec5lFqa4HRXwEYTgJH9z1jjqFyIJCLiyuWkONPqL
-ADr7+AWgSSlojIDOW1UG12wAYBjuXYeSENfYWUtmY0JhhQ==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-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExEzAR
BgNVBAoTClNTTCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0aW5nIFB1cnBvc2Vz
IE9ubHkxFTATBgNVBAMTDGxvY2FsaG9zdCBDQTEdMBsGCSqGSIb3DQEJARYOcm9v
-dEBsb2NhbGhvc3QwHhcNMTAxMTMwMDYxOTIxWhcNMTIxMTI5MDYxOTIxWjCBpjEL
+dEBsb2NhbGhvc3QwHhcNMTIwNzIzMDkwNDA0WhcNMTQwNzIzMDkwNDA0WjCBpjEL
MAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRh
IEJhcmJhcmExEzARBgNVBAoTClNTTCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0
aW5nIFB1cnBvc2VzIE9ubHkxEjAQBgNVBAMTCWxvY2FsaG9zdDEdMBsGCSqGSIb3
DQEJARYOcm9vdEBsb2NhbGhvc3QwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGB
-AMkIfppB2/lqViayi38AY7fPF3aGucpFDxrcVy2lhj4ulFY9anldtE1yji5EnrQo
-utB4/3EPNta6TARazZwPJc68pEXCSKJNOwxr8BayD/C8s4+7Dbp6jPd478QF11Ct
-67Z1Ir/dV6sxE7ygAJBs9bGYpAWrVQvcEkfMJtpzvHKdAgMBAAEwDQYJKoZIhvcN
-AQEFBQADgYEAWXBBlzPp0DFDIoK/VwNBEYwD2qWuBCidH5DXsLB0Oje3W8ZGxd8K
-4dJQlQ/Hz/FQwV6Olior0dVCNf1atI1R/zgLXWXwr2rNqD6an9Io54SktnJo0180
-UOezPxxK+lIwydrlpHKtQucO0wIf9gpFCJTofXpek8Xl1GmQtsl4SYA=
+ALrIlOCYalKcIONkooeO0R2V0WI5KyTIeOqfEPs83FFtAAdRtNUe1g86ijWEbq5R
+1/M0U0J473akf+4lsM37GTa06zZmKY7pJfyrwqQ3grPhu3ZKu0lWd9zUuOTwXBKx
+MpXakuh6cqM0B3OZtSTPBNP60GTPAOnThQ5dQvzBImbXAgMBAAEwDQYJKoZIhvcN
+AQEFBQADgYEAjm9qlg3OidAANgGRx9ZFHj7yTCdld+UQKfOGR4y39BnNv2BZCr3A
+bQnYylXGRkRf1sDDg++KsfYjB/fs9RvPJVpN2ef2oqOiBi5PHlaGNje4X/x8UFQW
+ecNuSC6uDPNzQCzHZETKSuC6mM5dmwP/zunPqZKSE3XTh8f9Gj7Gb/U=
-----END CERTIFICATE-----
-root:x:0:0:root Helga:/root:/bin/bash
+root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
adm:x:3:4:adm:/var/adm:/bin/false
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
-mail:x:8:12:mail:/var/spool/mail:/bin/false
-news:x:9:13:news:/usr/lib/news:/bin/false
-uucp:x:10:14:uucp:/var/spool/uucppublic:/bin/false
+mail:x:8:12:added by portage for mailbase:/var/spool/mail:/sbin/nologin
+news:x:9:13:news:/var/spool/news:/bin/false
+uucp:x:10:14:uucp:/var/spool/uucp:/bin/false
operator:x:11:0:operator:/root:/bin/bash
-man:x:13:15:man:/usr/share/man:/bin/false
-postmaster:x:14:12:postmaster:/var/spool/mail:/bin/false
+man:x:13:15:added by portage for man:/usr/share/man:/sbin/nologin
+postmaster:x:14:249:added by portage for mailbase:/var/spool/mail:/sbin/nologin
cron:x:16:16:added by portage for cronbase:/var/spool/cron:/sbin/nologin
ftp:x:21:21:added by portage for ftpbase:/home/ftp:/sbin/nologin
sshd:x:22:22:added by portage for openssh:/var/empty:/sbin/nologin
named:x:40:40:added by portage for bind:/etc/bind:/sbin/nologin
mysql:x:60:60:added by portage for mysql:/dev/null:/sbin/nologin
apache:x:81:81:added by portage for apache:/var/www:/sbin/nologin
-ulogd:x:101:197:added by portage for ulogd:/var/log/ulogd:/sbin/nologin
+messagebus:x:101:247:added by portage for dbus:/dev/null:/sbin/nologin
tcpdump:x:102:196:added by portage for tcpdump:/dev/null:/sbin/nologin
-messagebus:x:103:110:added by portage for dbus:/dev/null:/sbin/nologin
nagios:x:104:104:added by portage for nagios-plugins-snmp:/var/nagios/home:/bin/bash
teamspeak3:x:105:103:added by portage for teamspeak-server-bin:/dev/null:/sbin/nologin
polw:x:106:102:added by portage for policyd-weight:/dev/null:/sbin/nologin
clamav:x:109:998:added by portage for clamav:/dev/null:/sbin/nologin
proftpd:x:110:1008:added by portage for proftpd:/dev/null:/sbin/nologin
rpc:x:111:111:added by portage for portmap:/dev/null:/sbin/nologin
+openvpn:x:112:997:added by portage for openvpn:/dev/null:/sbin/nologin
+git:x:113:996:added by portage for gitolite:/var/lib/gitolite:/bin/bash
ntp:x:123:123:added by portage for ntp:/dev/null:/sbin/nologin
postfix:x:207:207:added by portage for postfix:/var/spool/postfix:/sbin/nologin
smmsp:x:209:209:smmsp:/var/spool/mqueue:/bin/false
portage:x:250:250:portage:/var/tmp/portage:/bin/false
ldap:x:439:439:added by portage for openldap:/usr/lib64/openldap:/sbin/nologin
-nobody:x:65534:65534:nobody:/:/bin/false
+nobody:x:65534:65534:nobody:/var/empty:/bin/false
taurec:x:1000:100:Jörn Valentin:/home/taurec:/bin/bash
morph:x:1001:100:Daniel Wendler:/home/morph:/bin/bash
+minecraft:x:1002:1002:minecraft server:/home/minecraft:/bin/bash
patrick:x:1004:100:Patrick Hennig:/home/patrick:/bin/bash
vivi:x:1006:100:Vivien Winkler:/home/vivi:/bin/bash
frank:x:1017:100:Frank Brehm:/home/frank:/bin/bash
alfred:x:1024:100:Alfred Haberkorn:/home/alfred:/bin/bash
steffen:x:1025:100:Steffen Brehm:/home/steffen:/bin/bash
heiko:x:1029:100:Heiko Hennig:/home/heiko:/bin/bash
-minecraft:x:1002:1002:minecraft server:/home/minecraft:/bin/bash
-openvpn:x:112:997:added by portage for openvpn:/dev/null:/sbin/nologin
-git:x:113:996:added by portage for gitolite:/var/lib/gitolite:/bin/bash
+ulogd:x:103:197:added by portage for ulogd:/var/log/ulogd:/sbin/nologin
+++ /dev/null
-root:x:0:0:root Helga:/root:/bin/bash
-bin:x:1:1:bin:/bin:/bin/false
-daemon:x:2:2:daemon:/sbin:/bin/false
-adm:x:3:4:adm:/var/adm:/bin/false
-lp:x:4:7:lp:/var/spool/lpd:/bin/false
-sync:x:5:0:sync:/sbin:/bin/sync
-shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
-halt:x:7:0:halt:/sbin:/sbin/halt
-mail:x:8:12:mail:/var/spool/mail:/bin/false
-news:x:9:13:news:/usr/lib/news:/bin/false
-uucp:x:10:14:uucp:/var/spool/uucppublic:/bin/false
-operator:x:11:0:operator:/root:/bin/bash
-man:x:13:15:man:/usr/share/man:/bin/false
-postmaster:x:14:12:postmaster:/var/spool/mail:/bin/false
-cron:x:16:16:added by portage for cronbase:/var/spool/cron:/sbin/nologin
-sshd:x:22:22:added by portage for openssh:/var/empty:/sbin/nologin
-at:x:25:25:added by portage for at:/var/spool/at/atjobs:/sbin/nologin
-named:x:40:40:added by portage for bind:/etc/bind:/sbin/nologin
-mysql:x:60:60:added by portage for mysql:/dev/null:/sbin/nologin
-apache:x:81:81:added by portage for apache:/var/www:/sbin/nologin
-messagebus:x:101:1002:added by portage for dbus:/dev/null:/sbin/nologin
-ulogd:x:102:1003:added by portage for ulogd:/var/log/ulogd:/sbin/nologin
-clamav:x:103:1004:added by portage for clamav:/dev/null:/sbin/nologin
-polw:x:104:1005:added by portage for policyd-weight:/dev/null:/sbin/nologin
-postgrey:x:105:1006:added by portage for postgrey:/dev/null:/sbin/nologin
-amavis:x:106:1007:added by portage for amavisd-new:/var/amavis:/sbin/nologin
-rpc:x:111:111:added by portage for portmap:/dev/null:/sbin/nologin
-postfix:x:207:207:added by portage for postfix:/var/spool/postfix:/sbin/nologin
-smmsp:x:209:209:smmsp:/var/spool/mqueue:/bin/false
-portage:x:250:250:portage:/var/tmp/portage:/bin/false
-ldap:x:439:439:added by portage for openldap:/usr/lib64/openldap:/sbin/nologin
-nobody:x:65534:65534:nobody:/:/bin/false
-taurec:x:1000:100:Jörn Valentin:/home/taurec:/bin/bash
-frank:x:1017:100:Frank Brehm:/home/frank:/bin/bash
-ftp:x:21:21:added by portage for ftpbase:/home/ftp:/sbin/nologin
-proftpd:x:107:1008:added by portage for proftpd:/dev/null:/sbin/nologin
-ntp:x:123:123:added by portage for ntp:/dev/null:/sbin/nologin
-nagios:x:108:1009:added by portage for nagios-plugins-snmp:/var/nagios/home:/bin/bash
-tcpdump:x:109:1010:added by portage for tcpdump:/dev/null:/sbin/nologin
-games:x:36:35:added by portage for enemy-territory:/usr/games:/bin/bash
-teamspeak3:x:110:1012:added by portage for teamspeak-server-bin:/dev/null:/sbin/nologin
-alfred:x:1024:100:Alfred Haberkorn:/home/alfred:/bin/bash
-davis:x:1020:100:Davis Winkler:/home/davis:/bin/bash
-doris:x:1019:100:Doris Hennig:/home/doris:/bin/bash
-heiko:x:1029:100:Heiko Hennig:/home/heiko:/bin/bash
-morph:x:1001:100:Daniel Wendler:/home/morph:/bin/bash
-patrick:x:1004:100:Patrick Hennig:/home/patrick:/bin/bash
-steffen:x:1025:100:Steffen Brehm:/home/steffen:/bin/bash
-thomas:x:1021:100:Thomas Schmidt:/home/thomas:/bin/bash
-vivi:x:1006:100:Vivien Winkler:/home/vivi:/bin/bash
-vmail:x:1023:1023:Virtual Mailuser:/home/vmail:/bin/false
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2011.01.09.10.39.36; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2011.01.08.23.47.50; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-;output_buffering = 4096
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-;display_errors = On
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-;enable_dl = Off
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-from="frank@@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d262 2
-a263 1
-output_buffering = 4096
-d532 2
-a533 1
-display_errors = On
-d817 2
-a818 1
-enable_dl = Off
-d903 1
-d1222 1
-a1222 1
-mysql.default_host =
-d1273 1
-a1273 1
-mysqli.default_host =
-d1489 1
-a1489 1
-session.name = PHPSESSID
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.01.08.23.47.50; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
; See the PHP docs for more specific information.
; http://php.net/configuration.file
-; The syntax of the file is extremely simple. Whitespace and Lines
+; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.10.30.19.18.46; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.08.19.20.47.53; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-;output_buffering = 4096
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-from="frank@@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@a2 11
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-d6 16
-a21 8
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-d26 10
-a35 1
-;
-d39 4
-a42 1
-;
-d45 3
-a47 2
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-d49 6
-a54 5
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-d57 1
-a57 1
-;
-d60 1
-a60 1
-;
-d62 3
-a64 3
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-d68 1
-a68 2
-;
-;
-d72 13
-a84 3
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-d86 119
-d211 1
-d214 13
-a226 10
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-d229 1
-d233 2
-a234 1
-precision = 12
-d237 1
-d240 23
-a262 7
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-d270 3
-a272 3
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-d274 1
-a274 1
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-d276 2
-a277 1
-; Instead you must use zlib.output_handler.
-d284 3
-a286 3
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-d288 2
-a289 1
-; output_handler, or otherwise the output will be corrupted.
-d291 2
-d298 1
-d306 2
-d312 2
-a313 3
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-d316 1
-a316 1
-unserialize_callback_func=
-d323 13
-a335 10
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-a336 1
-;
-d338 1
-a338 1
-;
-d344 1
-d351 1
-d356 1
-a363 1
-;
-d365 2
-a366 1
-; environment variable!
-d372 1
-d379 1
-d385 1
-d391 1
-d396 1
-d405 5
-a409 3
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-d414 2
-a415 1
-; realpath_cache_size=16k
-d420 6
-a425 1
-; realpath_cache_ttl=120
-a426 3
-;
-; Misc
-;
-d431 1
-a433 1
-
-d438 22
-a459 5
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-;max_input_nesting_level = 64 ; Maximum input variable nesting level
-memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
-
-d465 17
-a481 3
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-d502 41
-a542 39
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-;
-; possible values for display_errors:
-;
-; Off - Do not display any errors
-; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
-;
-;display_errors = "stderr"
-;
-; stdout (On) - Display errors to STDOUT
-;
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-d545 9
-a553 4
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = Off
-d557 1
-d562 1
-d568 1
-d574 1
-d577 1
-d580 7
-a586 1
-; Store the last error/warning message in $php_errormsg (boolean).
-d590 1
-d592 1
-d596 10
-a605 3
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-d609 1
-a609 1
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-d612 1
-a612 1
-; the dot.
-d614 2
-d617 2
-d621 4
-a624 1
-; String to output before an error message.
-d627 4
-a630 1
-; String to output after an error message.
-d633 5
-a637 3
-; Log errors to specified file.
-;error_log = filename
-
-a640 1
-
-a643 2
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-d646 3
-a648 1
-; Default is "&".
-d652 1
-a652 1
-; Default is "&".
-d654 2
-d658 26
-a683 5
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-d687 1
-a687 4
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-d691 1
-d694 24
-a717 9
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = On
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = On
-d724 1
-d728 1
-d731 15
-a745 5
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-d748 1
-d752 1
-d755 2
-a756 1
-; Automatically add files before or after any PHP document.
-d758 3
-d763 1
-a763 1
-; As of 4.0b4, PHP always outputs a character encoding by default in
-d768 1
-d770 3
-d775 3
-a777 1
-; Always populate the $HTTP_RAW_POST_DATA variable.
-a779 1
-
-d789 3
-d798 1
-d803 1
-d807 4
-a810 1
-extension_dir = /usr/lib64/php5/lib/extensions/no-debug-non-zts-20060613
-d815 1
-d822 2
-a823 1
-; cgi.force_redirect = 1
-d826 2
-a827 2
-; every request.
-; cgi.nph = 1
-d833 2
-a834 1
-; cgi.redirect_status_env = ;
-d839 1
-a839 1
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
-d842 2
-a843 1
-; cgi.fix_pathinfo=0
-d850 2
-a851 1
-; fastcgi.impersonate = 1;
-d853 3
-a855 2
-; Disable logging through FastCGI connection
-; fastcgi.logging = 0
-d862 1
-a864 1
-
-d870 1
-d875 1
-d879 1
-a881 1
-
-d890 1
-d894 1
-d897 3
-a899 1
-; Define the anonymous ftp password (your email address)
-d901 1
-d903 3
-a905 2
-; Define the User-Agent string
-; user_agent="PHP"
-d908 1
-d916 2
-a917 2
-; auto_detect_line_endings = Off
-
-d922 1
-a922 1
-;
-d936 7
-a942 5
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-d948 1
-a948 1
-
-a951 1
-;extension=php_dbase.dll
-d953 1
-a953 1
-;extension=php_fdf.dll
-d957 1
-a957 1
-;extension=php_ifx.dll
-a961 3
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-a962 1
-;extension=php_msql.dll
-d966 2
-a967 1
-;extension=php_oci8.dll
-a968 1
-;extension=php_pdo.dll
-a972 1
-;extension=php_pdo_oci8.dll
-d977 1
-d984 1
-d997 1
-d1000 1
-d1002 2
-d1006 1
-d1008 2
-d1013 1
-d1015 2
-d1024 7
-d1032 1
-d1035 3
-d1040 1
-d1043 3
-a1045 3
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-d1047 1
-d1050 26
-d1080 1
-d1085 1
-d1087 1
-d1091 1
-d1095 1
-d1103 6
-d1110 1
-d1114 1
-d1116 2
-d1119 2
-d1123 4
-d1128 1
-d1132 1
-d1136 1
-d1140 1
-d1145 1
-d1150 2
-a1151 1
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-d1154 33
-d1188 4
-d1193 1
-d1196 4
-d1201 1
-d1205 1
-d1212 1
-d1217 1
-d1221 2
-a1222 1
-mysql.default_host =
-d1225 1
-d1233 1
-d1237 1
-d1242 1
-d1247 12
-d1260 1
-d1263 4
-d1271 1
-d1276 1
-d1280 2
-a1281 1
-mysqli.default_host =
-d1284 1
-d1292 1
-d1298 19
-a1316 3
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-d1318 1
-a1318 5
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-d1320 3
-a1322 2
-[OCI8]
-; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
-d1327 1
-d1333 1
-d1340 1
-d1343 13
-d1358 1
-d1363 2
-a1364 1
-;oci8.default_prefetch = 10
-d1368 1
-d1373 1
-d1378 1
-d1382 1
-d1386 1
-d1391 1
-d1396 1
-a1398 25
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-d1401 1
-d1405 1
-d1409 1
-d1413 1
-d1417 1
-d1420 18
-d1440 1
-d1444 1
-a1446 37
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-d1449 1
-d1456 1
-a1456 1
-; As of PHP 4.0.1, you can define the path as:
-d1478 1
-d1482 1
-d1485 2
-a1486 1
-;session.cookie_secure =
-d1488 6
-a1493 3
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-d1496 2
-a1497 1
-session.name = PHPSESSID
-d1500 1
-d1504 1
-d1508 1
-d1512 1
-d1516 2
-a1517 1
-session.cookie_httponly =
-d1520 1
-d1523 11
-a1533 5
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-d1535 13
-a1547 2
-session.gc_probability = 1
-session.gc_divisor = 100
-d1551 1
-d1563 1
-a1563 1
-; to initialize a session variable in the global scope, albeit register_globals
-d1566 20
-a1585 4
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-d1590 1
-d1594 1
-d1598 4
-a1601 4
-session.entropy_file =
-
-;session.entropy_length = 16
-
-d1606 1
-d1610 1
-d1622 1
-d1625 8
-a1632 3
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-d1637 9
-a1645 5
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-d1652 5
-a1656 1
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-d1705 1
-a1705 1
-; Specify client character set.
-d1712 1
-d1716 1
-d1720 1
-d1724 1
-d1729 1
-d1734 1
-d1736 1
-d1738 1
-d1740 1
-d1742 1
-d1744 1
-d1746 1
-d1748 1
-d1750 1
-d1753 4
-d1759 1
-d1765 1
-d1769 1
-d1774 1
-d1782 1
-d1787 1
-d1792 1
-d1803 1
-d1806 11
-a1816 14
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-d1819 1
-a1819 1
-; Tell the jpeg decode to libjpeg warnings and try to create
-d1822 1
-d1831 1
-d1833 2
-d1836 2
-d1839 2
-d1842 2
-d1845 2
-d1851 1
-d1857 1
-d1862 1
-d1864 1
-d1866 1
-d1868 2
-a1869 1
-; (time to live) Sets the number of second while cached file will be used
-d1871 1
-d1874 25
-a1901 5
-
-; MySQL extensions default connection charset settings
-;mysql.connect_charset = utf8
-;mysqli.connect_charset = utf8
-;pdo_mysql.connect_charset = utf8
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.10.29.22.18.51; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = Off
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
+++ /dev/null
-extension=apc.so
-apc.enabled="1"
-apc.shm_segments="1"
-apc.shm_size="30"
-apc.num_files_hint="1024"
-apc.ttl="7200"
-apc.user_ttl="7200"
-apc.gc_ttl="3600"
-apc.cache_by_default="1"
-;apc.filters=""
-apc.mmap_file_mask="/tmp/apcphp5.XXXXXX"
-apc.slam_defense="0"
-apc.file_update_protection="2"
-apc.enable_cli="0"
-apc.max_file_size="1M"
-apc.stat="1"
-apc.write_lock="1"
-apc.report_autofilter="0"
-apc.include_once_override="0"
-apc.rfc1867="0"
-apc.rfc1867_prefix="upload_"
-apc.rfc1867_name="APC_UPLOAD_PROGRESS"
-apc.rfc1867_freq="0"
-apc.localcache="0"
-apc.localcache.size="512"
-apc.coredump_unmap="0"
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-;output_buffering = 4096
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-from="frank@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = Off
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
; See the PHP docs for more specific information.
; http://php.net/configuration.file
-; The syntax of the file is extremely simple. Whitespace and Lines
+; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2011.01.09.11.02.44; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2011.01.08.23.47.46; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-;error_reporting = E_ALL | E_STRICT
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-;log_errors = On
-log_errors = stderr
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = On
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-from="frank@@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d262 1
-a262 1
-output_buffering = 4096
-d431 1
-a431 1
-expose_php = Off
-d514 2
-a515 1
-error_reporting = E_ALL | E_STRICT
-d532 1
-a532 1
-display_errors = On
-d553 2
-a554 1
-log_errors = On
-d703 1
-a703 1
-register_long_arrays = Off
-d718 1
-a718 1
-register_argc_argv = Off
-d817 1
-a817 1
-enable_dl = Off
-d902 1
-d1221 1
-a1221 1
-mysql.default_host =
-d1272 1
-a1272 1
-mysqli.default_host =
-d1488 1
-a1488 1
-session.name = PHPSESSID
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2011.01.08.23.47.46; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
; See the PHP docs for more specific information.
; http://php.net/configuration.file
-; The syntax of the file is extremely simple. Whitespace and Lines
+; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
-;error_reporting = E_ALL | E_STRICT
error_reporting = E_ALL
; This directive controls whether or not and where PHP will output errors,
; Development Value: On
; Production Value: On
; http://php.net/log-errors
-;log_errors = On
log_errors = stderr
; Set maximum length of log_errors. In error_log information about the source is
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL | E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = On
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = On
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = On
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = On
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll ; Must be after mbstring as it depends on it
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = On
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; find /path/to/sessions -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = On
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = On
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-session.entropy_file =
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.10.30.19.29.52; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.08.19.20.48.48; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = On
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-from="frank@@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = "localhost"
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@a2 11
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-d6 16
-a21 8
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-d26 10
-a35 1
-;
-d39 4
-a42 1
-;
-d45 3
-a47 2
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-d49 6
-a54 5
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-d57 1
-a57 1
-;
-d60 1
-a60 1
-;
-d62 3
-a64 3
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-d68 1
-a68 2
-;
-;
-d72 13
-a84 3
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-d86 119
-d211 1
-d214 13
-a226 10
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-d229 1
-d233 2
-a234 1
-precision = 12
-d237 1
-d240 23
-a262 8
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = Off
-d269 3
-a271 3
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-d273 1
-a273 1
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-d275 2
-a276 1
-; Instead you must use zlib.output_handler.
-d283 3
-a285 3
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-d287 2
-a288 1
-; output_handler, or otherwise the output will be corrupted.
-d290 2
-d297 1
-d305 2
-d311 2
-a312 3
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-d315 1
-a315 1
-unserialize_callback_func=
-d322 13
-a334 10
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-a335 1
-;
-d337 1
-a337 1
-;
-d343 1
-d350 1
-d355 1
-a362 1
-;
-d364 2
-a365 1
-; environment variable!
-d371 1
-d378 1
-d384 1
-d390 1
-d395 1
-d404 5
-a408 3
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-d413 2
-a414 1
-; realpath_cache_size=16k
-d419 6
-a424 1
-; realpath_cache_ttl=120
-a425 3
-;
-; Misc
-;
-d430 1
-a432 1
-
-d437 22
-a458 5
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-;max_input_nesting_level = 64 ; Maximum input variable nesting level
-memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
-
-d464 17
-a480 3
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-d501 41
-a541 39
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-;
-; possible values for display_errors:
-;
-; Off - Do not display any errors
-; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
-;
-;display_errors = "stderr"
-;
-; stdout (On) - Display errors to STDOUT
-;
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-d544 8
-a551 3
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-d556 1
-d561 1
-d567 1
-d573 1
-d576 1
-d579 7
-a585 1
-; Store the last error/warning message in $php_errormsg (boolean).
-d589 1
-d591 1
-d595 10
-a604 3
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-d608 1
-a608 1
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-d611 1
-a611 1
-; the dot.
-d613 2
-d616 2
-d620 4
-a623 1
-; String to output before an error message.
-d626 4
-a629 1
-; String to output after an error message.
-d632 5
-a636 3
-; Log errors to specified file.
-;error_log = filename
-
-a639 1
-
-a642 2
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-d645 3
-a647 1
-; Default is "&".
-d651 1
-a651 1
-; Default is "&".
-d653 2
-d657 26
-a682 5
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-d686 1
-a686 4
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-d690 1
-d693 8
-a700 3
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-d703 13
-a715 3
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-d723 1
-d727 1
-d730 15
-a744 5
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-d747 1
-d751 1
-d754 2
-a755 1
-; Automatically add files before or after any PHP document.
-d757 3
-d762 1
-a762 1
-; As of 4.0b4, PHP always outputs a character encoding by default in
-d767 1
-d769 3
-d774 3
-a776 1
-; Always populate the $HTTP_RAW_POST_DATA variable.
-a778 1
-
-d788 3
-d797 1
-d802 1
-d806 4
-a809 1
-extension_dir = /usr/lib64/php5/lib/extensions/no-debug-non-zts-20060613
-d814 1
-d821 2
-a822 1
-; cgi.force_redirect = 1
-d825 2
-a826 2
-; every request.
-; cgi.nph = 1
-d832 2
-a833 1
-; cgi.redirect_status_env = ;
-d838 1
-a838 1
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
-d841 2
-a842 1
-; cgi.fix_pathinfo=0
-d849 2
-a850 1
-; fastcgi.impersonate = 1;
-d852 3
-a854 2
-; Disable logging through FastCGI connection
-; fastcgi.logging = 0
-d861 1
-a863 1
-
-d869 1
-d874 1
-d878 1
-a880 1
-
-d889 1
-d893 1
-d896 3
-a898 1
-; Define the anonymous ftp password (your email address)
-d900 1
-d902 3
-a904 2
-; Define the User-Agent string
-; user_agent="PHP"
-d907 1
-d915 2
-a916 2
-; auto_detect_line_endings = Off
-
-d921 1
-a921 1
-;
-d935 7
-a941 5
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-d947 1
-a947 1
-
-a950 1
-;extension=php_dbase.dll
-d952 1
-a952 1
-;extension=php_fdf.dll
-d956 1
-a956 1
-;extension=php_ifx.dll
-a960 3
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-a961 1
-;extension=php_msql.dll
-d965 2
-a966 1
-;extension=php_oci8.dll
-a967 1
-;extension=php_pdo.dll
-a971 1
-;extension=php_pdo_oci8.dll
-d976 1
-d983 1
-d996 1
-d999 1
-d1001 2
-d1005 1
-d1007 2
-d1012 1
-d1014 2
-d1023 7
-d1031 1
-d1034 3
-d1039 1
-d1042 3
-a1044 3
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-d1046 1
-d1049 26
-d1079 1
-d1084 1
-d1086 1
-d1090 1
-d1094 1
-d1102 6
-d1109 1
-d1113 1
-d1115 2
-d1118 2
-d1122 4
-d1127 1
-d1131 1
-d1135 1
-d1139 1
-d1144 1
-d1149 2
-a1150 1
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-d1153 33
-d1187 4
-d1192 1
-d1195 4
-d1200 1
-d1204 1
-d1211 1
-d1216 1
-d1220 2
-a1221 1
-mysql.default_host =
-d1224 1
-d1232 1
-d1236 1
-d1241 1
-d1246 12
-d1259 1
-d1262 4
-d1270 1
-d1275 1
-d1279 2
-a1280 1
-mysqli.default_host =
-d1283 1
-d1291 1
-d1297 19
-a1315 6
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-d1317 1
-a1317 2
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-d1319 3
-a1321 2
-[OCI8]
-; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
-d1326 1
-d1332 1
-d1339 1
-d1342 13
-d1357 1
-d1362 2
-a1363 1
-;oci8.default_prefetch = 10
-d1367 1
-d1372 1
-d1377 1
-d1381 1
-d1385 1
-d1390 1
-d1395 1
-a1397 25
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-d1400 1
-d1404 1
-d1408 1
-d1412 1
-d1416 1
-d1419 18
-d1439 1
-d1443 1
-a1445 37
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-d1448 1
-d1455 1
-a1455 1
-; As of PHP 4.0.1, you can define the path as:
-d1477 1
-d1481 1
-d1484 2
-a1485 1
-;session.cookie_secure =
-d1487 6
-a1492 3
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-d1495 2
-a1496 1
-session.name = PHPSESSID
-d1499 1
-d1503 1
-d1507 1
-d1511 1
-d1515 2
-a1516 1
-session.cookie_httponly =
-d1519 1
-d1522 11
-a1532 5
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-d1534 13
-a1546 2
-session.gc_probability = 1
-session.gc_divisor = 100
-d1550 1
-d1562 1
-a1562 1
-; to initialize a session variable in the global scope, albeit register_globals
-d1565 20
-a1584 4
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-d1589 1
-d1593 1
-d1597 4
-a1600 4
-session.entropy_file =
-
-;session.entropy_length = 16
-
-d1605 1
-d1609 1
-d1621 1
-d1624 8
-a1631 3
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-d1636 9
-a1644 5
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-d1651 5
-a1655 1
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-d1704 1
-a1704 1
-; Specify client character set.
-d1711 1
-d1715 1
-d1719 1
-d1723 1
-d1728 1
-d1733 1
-d1735 1
-d1737 1
-d1739 1
-d1741 1
-d1743 1
-d1745 1
-d1747 1
-d1749 1
-d1752 4
-d1758 1
-d1764 1
-d1768 1
-d1773 1
-d1781 1
-d1786 1
-d1791 1
-d1802 1
-d1805 11
-a1815 14
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-d1818 1
-a1818 1
-; Tell the jpeg decode to libjpeg warnings and try to create
-d1821 1
-d1830 1
-d1832 2
-d1835 2
-d1838 2
-d1841 2
-d1844 2
-d1850 1
-d1856 1
-d1861 1
-d1863 1
-d1865 1
-d1867 2
-a1868 1
-; (time to live) Sets the number of second while cached file will be used
-d1870 1
-d1873 25
-@
+++ /dev/null
-head 1.1;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.1
-date 2010.10.29.22.18.48; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = Off
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
-@
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = On
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = stderr
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = On
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-from="frank@brehm-online.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host = "localhost"
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host = localhost
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHP_SESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory. Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com. Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation. If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; ^ bitwise XOR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-; foo = ; sets foo to an empty string
-; foo = None ; sets foo to an empty string
-; foo = "None" ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it's
-; much more verbose when it comes to errors. We recommending using the
-; development version only in development environments as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; allow_call_time_pass_reference
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; display_errors
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; display_startup_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; error_reporting
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-
-; html_errors
-; Default Value: On
-; Development Value: On
-; Production value: Off
-
-; log_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-
-; magic_quotes_gpc
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; max_input_time
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-
-; output_buffering
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-
-; register_argc_argv
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; register_long_arrays
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; request_order
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-
-; session.bug_compat_42
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.bug_compat_warn
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-
-; session.gc_divisor
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-
-; session.hash_bits_per_character
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-
-; short_open_tag
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-
-; track_errors
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-
-; url_rewriter.tags
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It's been
-; recommended for several years that you not use the short tag "short cut" and
-; instead to use the full <?php and ?> tag combination. With the wide spread use
-; of XML and use of these tags by other languages, the server can become easily
-; confused and end up parsing the wrong code in the wrong context. But because
-; this short cut has been a feature for such a long time, it's currently still
-; supported for backwards compatibility, but we recommend you don't use them.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
-short_open_tag = Off
-
-; Allow ASP-style <% %> tags.
-; http://php.net/asp-tags
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-; http://php.net/y2k-compliance
-y2k_compliance = On
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-; functions.
-; Possible Values:
-; On = Enabled and buffer is unlimited. (Use with caution)
-; Off = Disabled
-; Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
-zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; This directive allows you to enable and disable warnings which PHP will issue
-; if you pass a value by reference at function call time. Passing values by
-; reference at function call time is a deprecated feature which will be removed
-; from PHP at some point in the near future. The acceptable method for passing a
-; value by reference to a function is by declaring the reference in the functions
-; definition, not at call time. This directive does not disable this feature, it
-; only determines whether PHP will warn you about it or not. These warnings
-; should enabled in development environments only.
-; Default Value: On (Suppress warnings)
-; Development Value: Off (Issue warnings)
-; Production Value: Off (Issue warnings)
-; http://php.net/allow-call-time-pass-reference
-allow_call_time_pass_reference = Off
-
-; Safe Mode
-; http://php.net/safe-mode
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-; http://php.net/safe-mode-gid
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-; http://php.net/safe-mode-include-dir
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-; http://php.net/safe-mode-exec-dir
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-; http://php.net/safe-mode-allowed-env-vars
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-; http://php.net/safe-mode-protected-env-vars
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-functions
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
-expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
-max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
-memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-; E_DEPRECATED - warn about code that will not work in future versions
-; of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
-; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
-; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
-; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
-; Default Value: E_ALL & ~E_NOTICE
-; Development Value: E_ALL | E_STRICT
-; Production Value: E_ALL & ~E_DEPRECATED
-; http://php.net/error-reporting
-error_reporting = E_ALL & ~E_DEPRECATED
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; It's recommended that errors be logged on production servers rather than
-; having the errors sent to STDOUT.
-; Possible Values:
-; Off = Do not display any errors
-; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
-display_errors = Off
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. But, it's strongly recommended that you
-; leave this setting off on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
-display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
-report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
-track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of inserting html
-; links to documentation related to that error. This directive controls whether
-; those HTML links appear in error messages or not. For performance and security
-; reasons, it's recommended you disable this on production servers.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: Off
-; http://php.net/html-errors
-html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<font color=#ff0000>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</font>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. If the register_globals directive is enabled, it also determines
-; what order variables are populated into the global space. G,P,C,E & S are
-; abbreviations for the following respective super globals: GET, POST, COOKIE,
-; ENV and SERVER. There is a performance penalty paid for the registration of
-; these arrays and because ENV is not as commonly used as the others, ENV is
-; is not recommended on productions servers. You can still get access to
-; the environment variables through getenv() should you need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
-variables_order = "GPCS"
-
-; This directive determines which super global data (G,P,C,E & S) should
-; be registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive are
-; specified in the same manner as the variables_order directive, EXCEPT one.
-; Leaving this value empty will cause PHP to use the value set in the
-; variables_order directive. It does not mean it will leave the super globals
-; array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
-request_order = "GP"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-; http://php.net/register-globals
-register_globals = Off
-
-; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
-; are registered by PHP or not. As they are deprecated, we obviously don't
-; recommend you use them. They are on by default for compatibility reasons but
-; they are not recommended on production servers.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-long-arrays
-register_long_arrays = Off
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-; http://php.net/auto-globals-jit
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-; http://php.net/post-max-size
-post_max_size = 8M
-
-; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
-; escape any character sequences in GET, POST, COOKIE and ENV data which might
-; otherwise corrupt data being placed in resources such as databases before
-; making that data available to you. Because of character encoding issues and
-; non-standard SQL implementations across many databases, it's not currently
-; possible for this feature to be 100% accurate. PHP's default behavior is to
-; enable the feature. We strongly recommend you use the escaping mechanisms
-; designed specifically for the database your using instead of relying on this
-; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/magic-quotes-gpc
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-; http://php.net/magic-quotes-runtime
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-; http://php.net/magic-quotes-sybase
-magic_quotes_sybase = Off
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a character encoding using
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-; http://php.net/default-mimetype
-default_mimetype = "text/html"
-
-; PHP's default character set is set to empty.
-; http://php.net/default-charset
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
-; to disable this feature.
-; http://php.net/always-populate-raw-post-data
-;always_populate_raw_post_data = On
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/php5:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
-upload_max_filesize = 2M
-
-; Maximum number of files that can be uploaded via a single request
-max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
-allow_url_fopen = Off
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; ... or with a path:
-;
-; extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
-; extension folders as well as the separate PECL DLL download (PHP 5).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_dba.dll
-;extension=php_exif.dll
-;extension=php_fileinfo.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_mysql.dll
-;extension=php_mysqli.dll
-;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
-;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mssql.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_phar.dll
-;extension=php_pspell.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite.dll
-;extension=php_sqlite3.dll
-;extension=php_sybase_ct.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-;extension=php_zip.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-
-[sqlite]
-; http://php.net/sqlite.assoc-case
-;sqlite.assoc_case = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-; http://php.net/define-syslog-variables
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; Log all mail() calls including the full path of the script, line #, to address and headers
-;mail.log =
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db = Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user = Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw = Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links. -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
-[MySQL]
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysql.allow_local_infile
-mysql.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysql.allow-persistent
-mysql.allow_persistent = On
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysql.cache_size
-mysql.cache_size = 2000
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysql.max-persistent
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/mysql.max-links
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysql.default-port
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysql.default-socket
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-host
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysql.default-user
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysql.default-password
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-; http://php.net/mysql.connect-timeout
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-; http://php.net/mysql.trace-mode
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/mysqli.max-persistent
-mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
-mysqli.allow_persistent = On
-
-; Maximum number of links. -1 means no limit.
-; http://php.net/mysqli.max-links
-mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
-mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mysqlnd]
-; Enable / Disable collection of general statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statstics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP). To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-; http://php.net/sybct.allow-persistent
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-; http://php.net/sybct.max-persistent
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-; http://php.net/sybct.max-links
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-; http://php.net/sybct.min-server-severity
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-; http://php.net/sybct.min-client-severity
-sybct.min_client_severity = 10
-
-; Set per-context timeout
-; http://php.net/sybct.timeout
-;sybct.timeout=
-
-;sybct.packet_size
-
-; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
-; Default: one minute
-;sybct.login_timeout=
-
-; The name of the host you claim to be connecting from, for display by sp_who.
-; Default: none
-;sybct.hostname=
-
-; Allows you to define how often deadlocks are to be retried. -1 means "forever".
-; Default: 0
-;sybct.deadlock_retry_count=
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
-[Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
-session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
-; session hijacking when not specifying and managing your own session id. It is
-; not the end all be all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
-session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
-session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
-session.gc_probability = 1
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, even when register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled. This feature
-; introduces some serious security problems if not handled correctly. It's
-; recommended that you do not use this feature on production servers. But you
-; should enable this on development servers and enable the warning as well. If you
-; do not enable the feature on development servers, you won't be warned when it's
-; used and debugging errors caused by this can be difficult to track down.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-42
-session.bug_compat_42 = Off
-
-; This setting controls whether or not you are warned by PHP when initializing a
-; session value into the global space. session.bug_compat_42 must be enabled before
-; these warnings can be issued by PHP. See the directive above for more information.
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/session.bug-compat-warn
-session.bug_compat_warn = Off
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-session.entropy_length = 0
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; On systems that don't have /dev/urandom /dev/arandom can be used
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
-session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-; 0 (MD5 128 bits)
-; 1 (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-; 4 (4 bits: 0-9, a-f)
-; 5 (5 bits: 0-9, a-v)
-; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-; http://php.net/mbstring.internal-encoding
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-; http://php.net/mbstring.http-input
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-; http://php.net/mbstring.http-output
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_detection = Off
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
-; Default: ""
-;mbstring.script_encoding=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-; Local Variables:
-; tab-width: 4
-; End:
--- /dev/null
+/etc/php/embed-php5.3/ext/apc.ini
\ No newline at end of file
--- /dev/null
+/etc/php/embed-php5.3/ext/crack.ini
\ No newline at end of file
--- /dev/null
+/etc/php/embed-php5.3/ext/http.ini
\ No newline at end of file
--- /dev/null
+/etc/php/embed-php5.3/ext/imagick.ini
\ No newline at end of file
--- /dev/null
+/etc/php/embed-php5.3/ext/mailparse.ini
\ No newline at end of file
--- /dev/null
+extension=apc.so
--- /dev/null
+extension=crack.so
--- /dev/null
+extension=http.so
+http.etag.mode=MD5
+http.force_exit=1
+http.log.allowed_methods=
+http.log.cache=
+http.log.composite=
+http.log.not_found=
+http.log.redirect=
+http.only_exceptions=0
+http.persistent.handles.ident=GLOBAL
+http.persistent.handles.limit=-1
+http.request.datashare.connect=0
+http.request.datashare.cookie=0
+http.request.datashare.dns=1
+http.request.datashare.ssl=0
+http.request.methods.allowed=
+http.request.methods.custom=
+http.send.inflate.start_auto=0
+http.send.inflate.start_flags=0
+http.send.deflate.start_auto=0
+http.send.deflate.start_flags=0
+http.send.not_found_404=1
--- /dev/null
+extension=imagick.so
--- /dev/null
+extension=mailparse.so
; See the PHP docs for more specific information.
; http://php.net/configuration.file
-; The syntax of the file is extremely simple. Whitespace and Lines
+; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
; See the PHP docs for more specific information.
; http://php.net/configuration.file
-; The syntax of the file is extremely simple. Whitespace and Lines
+; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; development and early testing.
;
; Error Level Constants:
-; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
-; scheduled for removal in PHP 6.
+; removed in PHP 5.4.
; Default Value: On
; Development Value: Off
; Production Value: Off
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combatting
+; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
-; in publically accessible computer.
+; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
-Subproject commit bd224ab4f0ee7a0eb62c8ccab1b104abccd78480
+Subproject commit 61b7f72a375e4ca93860181342243f4153e63ca5
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = //usr/lib64/postfix
+daemon_directory = /usr/lib64/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.7.1/html
+html_directory = /usr/share/doc/postfix-2.8.9/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.7.1/readme
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
home_mailbox = .maildir/
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - n - - smtpd
+#smtp inet n - n - 1 postscreen
+#smtpd pass - - n - - smtpd
+#dnsblog unix - - n - 0 dnsblog
+#tlsproxy unix - - n - 0 tlsproxy
#submission inet n - n - - smtpd
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# [Immer mit aufsteiger Nummer sauber eintragen!]
#
#
+/Sie konnen Ihre Postsendung in unserer Postabteilung personlich kriegen/ REJECT Body-Spamschutzregel 1148
+/Sie sollen dieses Postetikett drucken lassen/ REJECT Body-Spamschutzregel 1147
+/Wenn dies nicht sofort machen Sie Ihre E-Mail-Adresse deaktiviert von unserem Server\./ REJECT Body-Spamschutzregel 1146
+/^Message-ID:*@vps332995.netsons.net/ REJECT Body-Spamschutzregel 1145
+/dildodaddy/ REJECT Body-Spamschutzregel 1144
+/mehreren fehlgeschlagenen TAN-Eingeben/ REJECT Body-Spamschutzregel 1143
+/filename\=\"c.g.euromilion.pdf\"/ REJECT Body-Spamscutzregel 1142
+/^Bei Interesse bitten wir um folgende$/ REJECT Body-Spamscutzregel 1141
+/palmandmore\.de/ REJECT Body-Spamschutzregel 1140
+/kundenverifikationservice\.u2m\.ru\/VERIFY\.PHP REJECT/ Body-Spamschutzregel 1139
+/co.cc\/aff\/item.php\?usn\=(aeb1|dap1|dvg1)\&i\=it\_ep\&e\=admin\@groupon.de/ REJECT Body-Spamschutzregel 1138
+/You Are Guaranteed To Get Paid Instantly For Each Email You Process!/ REJECT Body-Spamschutzregel 1137
+/I (talk|speak) 2 \'languages\'. Now i\'m 24. I/ REJECT Body-Spamschutzregel 1136
+/My nickname \"Kuma\"\! \:\) I/ REJECT Body-Spamschutzregel 1135
+/http:\/\/free.fr\/support\/verification\/compte\// REJECT Body-Spamschutzregel 1134
+/http:\/\/sonofages.free.fr\/images\/LogoCreditMutuel.png/ REJECT Body-Spamschutzregel 1133
/ucc.edu.ni/ REJECT Body-Spamschutzregel 1132
/7figureincome\.php/ REJECT Body-Spamschutzregel 1131
/Cher Client Verified by Visa/ REJECT Body-Spamschutzregel 1130
/D-INFO.*REVERZ/ REJECT Body-Spamschutzregel 15
/greatmaleenhancement.biz/ REJECT Body-Spamschutzregel 16
/ Xanax / REJECT Body-Spamschutzregel 17
-/Vic(o|0)din/ REJECT Body-Spamschutzregel 18
-/Hydr(o|0)c(o|0)d(o|0)ne/ REJECT Body-Spamschutzregel 19
+/ Vic(o|0)din / REJECT Body-Spamschutzregel 18
+/ Hydr(o|0)c(o|0)d(o|0)ne / REJECT Body-Spamschutzregel 19
/ V1agra / REJECT Body-Spamschutzregel 20
/warehousefull.com/ REJECT Body-Spamschutzregel 21
/No doctor visit needed/ REJECT Body-Spamschutzregel 22
--- /dev/null
+# Version 3.69 / 8.6.2011
+#
+# Das Postfix-Buch - Sichere Mailserver mit Linux
+# http://www.postfixbuch.de
+#
+# Heinlein Professional Linux Support GmbH
+# http://www.heinlein-support.de
+#
+# Downloadquelle dieser Datei: http://www.postfixbuch.de/web/service/checks/
+#
+#
+# Verwendung der Filtersammlung auf eigene Gefahr.
+#
+# Es handelt sich dabei um einen tagesaktuellen Auszug der beim
+# ISP "JPBerlin.de" genutzten Filterregeln. Bitte pruefen Sie vor einem
+# Einsatz bei Ihnen ganz genau, ob diese Regeln noch aktuell und sinnvoll
+# sind und ob Sie sie einsetzen moechten!
+#
+#
+# Setzen Sie in /etc/postfix/main.cf einfach
+#
+# body_checks = pcre:/etc/postfix/body_checks oder
+# oder
+# body_checks = regexp:/etc/postfix/body_checks
+#
+# und fuehren Sie "rcpostfix reload" aus.
+#
+# Tipp: pcre ist ein Drittel schneller als regexp!
+#
+#
+
+#
+# Die Nummern hinter dem REJECT tauchen spaeter iM SMTP-Error oder im Log
+# auf, um die Filter-Regel wiederzufinden, die den Block ausgeloest hat.
+# Es kann stattdessen auch einfacher Text benutzt werden.
+#
+
+
+/^Received: from mail pickup service by EXDO01.stricker-marsch.de with Microsoft SMTPSVC.*/ REJECT Mailloopbomb bitte anrufen
+
+#
+#
+# Tagesaktuelle, nur voruebergehende Regelungen:
+# ===============================================
+# [Immer mit Timestamp (!) und ggf. Ticket-Nummer eintragen!]
+#
+
+/alexatrej14913.blogspot.com/ REJECT
+/m-back22.ocn.ad.jp/ REJECT
+/Received: from 83.3.224.146/ REJECT
+/<HTML><HEAD><TITLE>Western Union Alerts./ REJECT
+/http:\/\/www.rocktonchamber.com/ REJECT
+
+#
+#
+# Dauerhaft genutzte Regelungen:
+# ===============================================
+# [Immer mit aufsteiger Nummer sauber eintragen!]
+#
+#
+/ucc.edu.ni/ REJECT Body-Spamschutzregel 1132
+/7figureincome\.php/ REJECT Body-Spamschutzregel 1131
+/Cher Client Verified by Visa/ REJECT Body-Spamschutzregel 1130
+/^From: "Topillen Apotheke" / REJECT Body-Spamschutzregel 1129
+/^Aufgrund mehrerer Phishing Versuche, unsere Visa und Mastercard/ REJECT Body-Spamschutzregel 1128
+/^ Phishing Departament/ REJECT Body-Spamschutzregel 1127
+/We wish to invest between $5Million-$100Million in any viable projects/ REJECT Body-Spamschutzregel 1126
+/God bless you as you get back to me/ REJECT Body-Spamschutzregel 1125
+/www.(b|B)ien(e|E)tremag.com/ REJECT Body-Spamschutzregel 1124
+/Sehr geehrte Sparkasse Card/ REJECT Body-Spamschutzregel 1123
+/zigaretten-discount.info/ REJECT Body-Spamschutzregel 1122
+/zigaretten-discount\[punkt\]info/ REJECT Body-Spamschutzregel 1121
+/Guten Tag Mitglied [0-9]{5}/ REJECT Body-Spamschutzregel 1120
+/elenx.innovacon.com\/.e\/e.php/ REJECT Body-Spamschutzregel 1119
+/www.sniperrs.de\/modules\/Forums\/admin/ REJECT Body-Spamschutzregel 1118
+/boxneufnet.com\/id\/oragne.fr\/Identifiant/ REJECT Body-Spamschutzregel 1117
+/www.colellsa.com\/img\/quienes\/pabo\/paypal-fr/ REJECT Body-Spamschutzregel 1116
+/dekmor.cmu.ac.th\/sticker\/upload\/Logs\/Login\/webscrcmd/ REJECT Body-Spamschutzregel 1115
+/ektoschronou.com/ REJECT Body-Spamschutzregel 1114
+/ulouwaio.com/ REJECT Body-Spamschutzregel 1113
+/logonature.com.nu/ REJECT Body-Spamschutzregel 1112
+/suinlop.com/ REJECT Body-Spamschutzregel 1111
+/soudoorpo.com/ REJECT Body-Spamschutzregel 1110
+/GOOGLE AUSSTATTUNGSFONDS 20.?.? GEWINNER ANMELDEFORMULAR FUER ZAHLUNG/ REJECT Body-Spamschutzregel 1109
+/Anbieter: Privacy GG Limited, 99 Albert Street, Belize City, CA/ REJECT Body-Spamschutzregel 1108
+/^Die Nachricht wurde durch Interads 24 Ltd/ REJECT Body-Spamschutzregel 1107
+/www.sommer-mit-kollegen.de/ REJECT Body-Spamschutzregel 1006
+# Ein Spammer versenden immer Austragungslinks, die auf "/ausa" enden:
+/^www.*\/ausa$/ REJECT Body-Spamschutzregel 1105
+/KlickTel Telefonbuch OEM/ REJECT Body-Spamschutzregel 1104
+/www.klicktel24.org/ REJECT Body-Spamschutzregel 1103
+/Klicken Sie hier, und fühlen Sie sich endlich gut behandelt:/ REJECT Body-Spamschutzregel 1102
+/maryjanemax@yahoo.co.uk/ REJECT Body-Spamschutzregel 1101
+/http.*muqugeh\.cn/ REJECT Body-Spamschutzregel 1100
+/Bei uns bekommen Sie Ihren Kredit schnell, unbürokratisch, diskret und natürlich ohne Bankauskunft./ REJECT Body-Spamschutzregel 1099
+/INTERNATIONAL LOTTERIE PROMOTION SPIELGEMEINSCHAFT/ REJECT Body-Spamschutzregel 1098
+/Leider st=F6ren Sie.=20/ REJECT Body-Spamschutzregel 1097
+/Sie haben dieses Email erhalten, weil Sie im Newsletter von Promohouse Ltd eingetragen sind/ REJECT Body-Spamschutzregel 1096
+/ATTN: Beneficiar/ REJECT Body-Spamschutzregel 1095
+/www.hedonismails.de/ REJECT Body-Spamschutzregel 1094
+/www.globadressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1093
+/elegalal.nextmail.ru/ REJECT Body-Spamschutzregel 1092
+/http:\/\/www.switzerlandpussy.eu/ REJECT Body-Spamschutzregel 1082
+/Die jungen Girls fliegen nur so auf die langen/ REJECT Body-Spamschutzregel 1081
+/\*\*\*\* Commercial use of this software is prohibited \*\*\*\*/ REJECT Body-Spamschutzregel 1080
+/I finded your email in internet and I decide to ask you for help/ REJECT Body-Spamschutzregel 1079
+/Details und moegliche Schritte zur Entsperrung finden Sie/ REJECT Body-Spamschutzregel 1078
+/^Amount Won:/ REJECT Body-Spamschutzregel 1077
+/AWARD WINNING NOTICE/i REJECT Body-Spamschutzregel 1076
+/mixvarejo.com/ REJECT Body-Spamschutzregel 1075
+/www.global-db.(com|net|org)/ REJECT Body-Spamschutzregel 1074
+/^I am Barrister/ REJECT Body-Spamschutzregel 1073
+/respublica@gaucherepublicaine.org/ REJECT Body-Spamschutzregel 1072
+/NEU - Vi Super Active/ REJECT Body-Spamschutzregel 1071
+/anhaltende Versagensangste und wiederholte peinliche Situationen/ REJECT Body-Spamschutzregel 1070
+/Schulfreunde Vermittlungs Service AG/ REJECT Body-Spamschutzregel 1068
+/Multimedia Telegramm/ REJECT Body-Spamschutzregel 1067
+/http.*\.fdub\.biz/ REJECT Body-Spamschutzregel 1066
+/TanjaGuenther/ REJECT Body-Spamschutzregel 1065
+/www.bestnetz24.de\/letter\/ausgabe.php/ REJECT Body-Spamschutzregel 1064
+/www.db.?adressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1063
+/thomas@jthomas.es/ REJECT Body-Spamschutzregel 1062
+/Ihre Marketing Agentur Espa/ REJECT Body-Spamschutzregel 1061
+/www.pakandu.com/ REJECT Body-Spamschutzregel 1060
+/Glob.?.?.?(C|K)ontact.?.?.?Team/ REJECT Body-Spamschutzregel 1059
+/www.gc.?datenbaken.(com|net|org|info)/ REJECT Body-Spamschutzregel 1058
+/www.glc-?data.(com|net|org|info)/ REJECT Body-Spamschutzregel 1057
+/Global.?(C|K)ontact/i REJECT Body-Spamschutzregel 1056
+/www.imarketing.com.br.remove/ REJECT Body-Spamschutzregel 1055
+/Bestellen Sie jetzt und vergessen Sie Ihre Enttauschungen/ REJECT Body-Spamschutzregel 1054
+/Online Apotheke - original Qualitaet/ REJECT Body-Spamschutzregel 1053
+/Wir wissen was Frauen wollern/ REJECT Body-Spamschutzregel 1052
+/Viiiiaaaaaagra/ REJECT Body-Spamschutzregel 1051
+/Web: www.eurasianpages. com/ REJECT Body-Spamschutzregel 1050
+/^Firma Global Contact bietet Ihnen/ REJECT Body-Spamschutzregel 1049
+/www.g-adressen.net/ REJECT Body-Spamschutzregel 1048
+/NIEMALS geben Sie Ihre Passw.rter an niemanden NUR und melden Sie sich/ REJECT Body-Spamschutzregel 1047 Haspa-Pishing
+/www.loteria.es/ REJECT Body-Spamschutzregel 1046
+/Girls! Deveelop your sexual reelationship and get even MORE pleasurre!/ REJECT Body-Spamschutzregel 1045
+# Nigeria-Spam / phei 20080209
+/Ich bin bei einer routinen Überprüfung in meiner Bank/ REJECT Body-Spamschutzregel 1044
+/Ich vermute das diese E-Mail eine Überraschung für Sie sein wird/ REJECT Body-Spamschutzregel 1043
+/Ich bin bei einer routinen Überprüfung in meiner Bank / REJECT Body-Spamschutzregel 1042
+# Versendet UBE/UCE unter verbraucher@wichtig.ms
+/^Ein Dienst der IT4YOU AG, Friedrichstrasse 171, Berlin - Mitte als/ REJECT Body-Spamschutzregel 1041
+# Versendet KlickTel UBE/UCE: / phei 20080204
+/^www.cdtophit.org/ REJECT Body-Spamschutzregel 1040
+/http:\/\/www\.doenertreff\.de/ REJECT Body-Spamschutzregel 1039
+/Brauchen Sie noch einen Grund um zu Vegas VIP Casino/ REJECT Body-Spamschutzregel 1038
+/glob-contact.net$/ REJECT Body-Spamschutzregel 1037: glob-contact
+/^Ihr Glob-Kontakt-Team$/ REJECT Body-Spamschutzregel 1036: glob-contact
+/www.feilervision.de/ REJECT Body-Spamschutzregel 1035: feilervision
+/DER INVESTORALARM!/i REJECT Body-Spamschutzregel 1034
+/ES IST EIN UNGLAUBLICHES PROFITPOTENTIAL! VERLIERE DIESE CHANCE NICHT!/i REJECT Body-Spamschutzregel 1033
+/LOTTERY AND GAMING INTERNET MESSAGE CENTRE/ REJECT Body-Spamschutzregel 1033
+/I work very hard every day to be able to buy necessities for my mother/ REJECT Body-Spamschutzregel 1032
+/THE FREELOTTO COMPANY/ REJECT Body-Spamschutzregel 1031
+/BreakingMrktNews/ REJECT Body-Spamschutzregel 1030
+/China Media Crop OTC.BB CHMD/ REJECT Body-Spamschutzregel 1029
+/Weltweit gilt das nummerierte TAN-Verfahren als eines der sicherste/ REJECT Body-Spamschutzregel 1028: Postbank-Pishing
+/^Marion Beckera/ REJECT Body-Spamschutzregel 1027
+/Zwecks abschließende Zustimmung für deine Verhandlung zur/ REJECT Body-Spamschutzregel 1026
+/annullieren deine on-line Übertragung® Dienstleistungen./ REJECT Body-Spamschutzregel 1025
+/www.internetloginuser.info/ REJECT Body-Spamschutzregel 1024
+/realsevgi.com/ REJECT Body-Spamschutzregel 1023
+/Um mich zu entlasten, schicke ich Ihnen das (...) Foto wieder zurück./ REJECT Body-Spamschutzregel 1022
+/Oder Ihr Provider hat die Mail falsch weiter geleitet!?/ REJECT Body-Spamschutzregel 1021
+/Versatel-Attachment-Warning.txt/ REJECT Body-Spamschutzregel 1020
+/www=2Eanaforturizm=2Ecom/ REJECT Body-Spamschutzregel 1019
+/www.anaforturizm.com/ REJECT Body-Spamschutzregel 1018
+/The Jpberlin Support Team/ REJECT Body-Spamschutzregel 1017: Pishing-Mails
+/^jpberlin.de support team\./ REJECT Body-Spamschutzregel 1016: Pishing-Mails
+/You have successfully updated the password of your Jpberlin account/ REJECT Body-Spamschutzregel 1015
+/www.ru4mailnow.com/ REJECT Body-Spamschutzregel 1014
+/EXPLOSIVE PICK FOR OUR MEMBERS/ REJECT Body-Spamschutzregel 1013
+/AntiVirus-System: Kein Virus erkannt/ REJECT Body-Spamschutzregel 1012
+/--- FIFA Fussball-Weltmeisterschaft 2006/ REJECT Body-Spamschutzregel 1011
+/ankara@ankararentacar.de/ REJECT Body-Spamschutzregel 1010
+/Replica Watch Models/ REJECT Body-Spamschutzregel 1009
+/Diadem Travel/ REJECT Body-Spamschutzregel 1008
+/Let the search engine experts compete/ REJECT Body-Spamschutzregel 1007
+/Wenn du sonst noch helfen willst, dann verschick diese Nachricht einfach so oft du willst./ REJECT Body-Spamschutzregel 1006
+/http:\/\/www.ehmig.net\/web_mailer/ REJECT Body-Spamschutzregel 1005
+/http:\/\/real.slon.biz/ REJECT Body-Spamschutzregel 1004
+#/im Zusammenhang mit dem Arbeitslosengeld II/ REJECT Body-Spamschutzregel 1003
+/www.inverz.org/ REJECT Body-Spamschutzregel 1002
+/www.inverz.net/ REJECT Body-Spamschutzregel 1001
+
+
+
+
+
+
+/We recommend you to follow the instructions in order to keep your computer safe./ REJECT Body-Spamschutzregel 1
+/Sieh Dir einfach mal ein Video an und mach dann gleich ein Treffen/ REJECT Body-Spamschutzregel 2
+#/money.*back.*guarant/ REJECT Body-Spamschutzregel 3
+/ CIALIS / REJECT Body-Spamschutzregel 4
+/www.galamed.biz/ REJECT Body-Spamschutzregel 5
+/Starts working in less than 15 min./ REJECT Body-Spamschutzregel 6
+/Adipren720/ REJECT Body-Spamschutzregel 7
+/www.lending-home.com/ REJECT Body-Spamschutzregel 8
+/bigbonus-casino.com/ REJECT Body-Spamschutzregel 9
+/Ich hab die ultimative Seite.*dich, klick doch mal an!/ REJECT Body-Spamschutzregel 10
+/www.server42.com/ REJECT Body-Spamschutzregel 11
+/seo-profits.com/ REJECT Body-Spamschutzregel 12
+/Have a great web site, but no one knows it even/ REJECT Body-Spamschutzregel 13
+/REVERZ.*D-INFO/ REJECT Body-Spamschutzregel 14
+/D-INFO.*REVERZ/ REJECT Body-Spamschutzregel 15
+/greatmaleenhancement.biz/ REJECT Body-Spamschutzregel 16
+/ Xanax / REJECT Body-Spamschutzregel 17
+/Vic(o|0)din/ REJECT Body-Spamschutzregel 18
+/Hydr(o|0)c(o|0)d(o|0)ne/ REJECT Body-Spamschutzregel 19
+/ V1agra / REJECT Body-Spamschutzregel 20
+/warehousefull.com/ REJECT Body-Spamschutzregel 21
+/No doctor visit needed/ REJECT Body-Spamschutzregel 22
+/KLICKTEL KENNT SIE!/ REJECT Body-Spamschutzregel 23
+/^www.femo-online.de/ REJECT Body-Spamschutzregel 24
+/www.land-ua.com/ REJECT Body-Spamschutzregel 25
+/Come to Loqozine/ REJECT Body-Spamschutzregel 26
+/^<center><.*a href=.*img src=.*border.*><\/a><\/center>$/ REJECT Body-Spamschutzregel Check 27
+/www.gord.us/ REJECT Body-Spamschutzregel 28
+/www.reverz.org/ REJECT Body-Spamschutzregel 29
+/wonderfulaction.com/ REJECT Body-Spamschutzregel 30
+/At our pharmacy we offer/ REJECT Body-Spamschutzregel 31
+/Was ist besser als eine fette Ladung Sahne/ REJECT Body-Spamschutzregel 32
+/www.surerxmed.com/ REJECT Body-Spamschutzregel 33
+/www.surerxpills.com/ REJECT Body-Spamschutzregel 34
+/www.stifyems.com/ REJECT Body-Spamschutzregel 35
+/www.diatrus.com/ REJECT Body-Spamschutzregel 36
+/CITYNETT-NEWSLETTER/i REJECT Body-Spamschutzregel 37
+/Note: *Use *password/ REJECT Body-Spamschutzregel 38
+/ will be disabled because of improper using/ REJECT Body-Spamschutzregel 39
+/i.*don.*like.*the*.plaintext/ REJECT Body-Spamschutzregel 40
+/archive *password/ REJECT Body-Spamschutzregel 41
+# /The *Attac..* *team/ REJECT Body-Spamschutzregel 42
+/The *Attac.org *team/ REJECT Body-Spamschutzregel 43
+/The *Attac.de *team/ REJECT Body-Spamschutzregel 44
+/The *Attac-netzwerk.de *team/ REJECT Body-Spamschutzregel 45
+/The *Jpberlin.de *team/ REJECT Body-Spamschutzregel 46
+/Our main mailing server/ REJECT Body-Spamschutzregel 47
+/please update your profile at Billing Center/ REJECT Body-Spamschutzregel 48
+/WSEAS will reply to you/ REJECT Body-Spamschutzregel 49
+/de.componentsengine.net/ REJECT Body-Spamschutzregel 50
+/List von Components Engine eingetragen/ REJECT Body-Spamschutzregel 51
+/The Weekend Pill - Xialis is safer, quicker, lasts longers/ REJECT Body-Spamschutzregel
+/Muzenda der �teste Sohn von Paul Muzenda bin , einem Farmer in Simba/ REJECT Body-Spamschutzregel 53
+/Alles fr die Autorennbahn/ REJECT Body-Spamschutzregel 54
+/Der Wurm nennt sich selbst "ODIN" und konnte sich bist jetzt/ REJECT Body-Spamschutzregel 55
+/NICHT ABHEBEN, SONDERN SOFORT ABWEISEN/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 56
+/Es ist ein Virus, welcher alle IMEI und IMSI Daten/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 57
+/Der Meister unter den Druckprogrammen: PRINTMASTER 8 GOLD/ REJECT Body-Spamschutzregel 58
+/Stellen Sie sich vor, Sie kaufen ein Produkt oder eine Dienstleistung im/ REJECT Body-Spamschutzregel 59
+/So finden Sie blitzschnell den NAMEN und ADRESS-EINTRAG zu jeder/ REJECT Body-Spamschutzregel 60
+/^TVqQAAMAAAAEAAAA\/\/8AALgAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA$/ REJECT Body-Spamschutzregel Due to recent virus attacks, we temporarily block all Win32 executable files. Please re-send your attachment in a compressed (tar, zip, rar, etc.) form. Your message has NOT been delivered. 61
+/eptember 2003, Cumulative Patch/ REJECT Body-Spamschutzregel 62
+/Ich bin gerade vor einem neuen.*sehr gef�rlichen V.rus gewarnt/ REJECT Body-Spamschutzregel 63
+/^RSLxwtYBDB6FCv8ybBcS0zp9VU5of3K4BXuwyehTM0RI9IrSjVuwP94xfn0wgOjouKWzGXHVk3qg$/ REJECT Body-Spamschutzregel This is a Sobig-Worm! 64
+/exklusives virtuelles Gratis-Rubbellos welches Sie gleich jetzt live mit/ REJECT Body-Spamschutzregel 65
+/Willkommen beim Lucky7Casino/ REJECT Body-Spamschutzregel 66
+/heutzutage spielen Kontakte und Adressdaten eine immer wichtigere Rolle./ REJECT Body-Spamschutzregel 67
+/REVERZ anhand des Datenbestands der D-Info den gesuchten/ REJECT Body-Spamschutzregel 68
+/www.privatseitennetz.com/ REJECT Body-Spamschutzregel 69
+/Outlook and Outlook Express as well as five newly/ REJECT Body-Spamschutzregel 70
+/delog@cip.informatik.uni-wuerzburg.de/ REJECT Body-Spamschutzregel 71
+/credit.hostfree2003.com/ REJECT Body-Spamschutzregel 72
+/www.mediabiz.de.ewmail/ REJECT Body-Spamschutzregel 73
+/Want to boost your sales with Internet/ REJECT Body-Spamschutzregel 74
+/talente.tripod.com.br/ REJECT Body-Spamschutzregel 75
+/schlechte Schufa-Auskunft? Bonit�sprobleme? Dann w�len Sie doch/ REJECT Body-Spamschutzregel 76
+/Diese Liste von Banken, Sparkassen Volks- und Raiffeisenbanken OHNE Schufa-Anschluss finden Sie nicht/ REJECT Body-Spamschutzregel 77
+/Gute Nachrichten. Gerade habe ich die geile \"FickShow\" gefunden:/ REJECT Body-Spamschutzregel 78
+/Gute Nachrichten. Gerade habe ich die geile "FickShow" gefunden:/ REJECT Body-Spamschutzregel 79
+/Create Professional 3D Page-Tuning/ REJECT Body-Spamschutzregel 80
+/SEXKONTAKTE ONLINE/ REJECT Body-Spamschutzregel 81
+/FREE Access to.*adult.*sites/i REJECT Body-Spamschutzregel 82
+/web-supermarket.com/i REJECT Body-Spamschutzregel 83
+/Wir haben ihre Adresse durch eines unserer Partnerunternehmen/ REJECT Body-Spamschutzregel 84
+/Wir haben ihre Adresse.*Partnerunternehmen/i REJECT 85
+/herbal-place.com/ REJECT Body-Spamschutzregel 86
+/GIO DIET-CAPS greifen hier ein durch:/ REJECT Body-Spamschutzregel 87
+/These are Free Cash Grants That you NEVER have to repay/ REJECT Body-Spamschutzregel 88
+/Wir haben unseren Zugang neu upgedadet/ REJECT Body-Spamschutzregel 89
+/Jemand der Dich sehr gut kennt wuerde gern ein Treffen mit Dir/i REJECT Body-Spamschutzregel 90
+/Wenn Du wissen willst wer Dich treffen moechte/i REJECT Body-Spamschutzregel 91
+/You Have Won a FREEE/i REJECT Body-Spamschutzregel 93
+/Click Here For All Your Favorite Pornstars/i REJECT Body-Spamschutzregel 94
+/Year the U.S. Government Gives away BILLIONS in cash grants/i REJECT Body-Spamschutzregel 95
+/Banken ohne Schufa-Auskunft/i REJECT Body-Spamschutzregel 96
+/Probleme mit der Schufa/i REJECT Body-Spamschutzregel 97
+/Laden Sie sich jetzt unsere kostenlose Zugangssoftware runter/ REJECT Body-Spamschutzregel 98
+/Genocide Is A Black-And-White Concept/ REJECT Body-Spamschutzregel 99
+/So viele Wuensche auf einmal/ REJECT Body-Spamschutzregel 100
+/diese Mail ist kein SPAM/i REJECT Body-Spamschutzregel 101
+/Sch.*ne Gr.*e von Lucky Casino/ REJECT Body-Spamschutzregel 102
+/Weil Sie oder ein anderer bei Lucky Casino/i REJECT Body-Spamschutzregel 103
+/Endlich habe ich Deine E-Mail Adresse wieder gefunden, das hat aber/i REJECT Body-Spamschutzregel 104
+/galerie kurt im hirsch/ REJECT Body-Spamschutzregel
+/X-MS_Scanner: Kein Virus erkannt/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+/Anti_Virus Service/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+
+#
+# Checks gesammelt aus dem Netz von
+# http://www.hispalinux.es/~data/postfix/
+#
+/.*www\.removeyou\.com.*/ REJECT Body-Spamschutzregel 110
+/.*waterforge\.com.*/ REJECT Body-Spamschutzregel 111
+/.*capitalwave\.com\?subject=Please*/ REJECT Body-Spamschutzregel 112
+/\.virtmundo\.com/ REJECT Body-Spamschutzregel 113
+#/Accept Credit Cards/ REJECT Body-Spamschutzregel 114
+/Nude Celebrities/ REJECT Body-Spamschutzregel 115
+/PRODUCT or SERVICE/i REJECT Body-Spamschutzregel 116
+# /GUARANTEED!/ REJECT Body-Spamschutzregel 117
+/Amateur Girls/ REJECT Body-Spamschutzregel 118
+#/FREE MEMBERSHIP/ REJECT Body-Spamschutzregel 119
+#/bizinfo/ REJECT Body-Spamschutzregel 120
+# block iframe hack 122
+/<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>/ REJECT Body-Spamschutzregel 123
+# some porn spam phrases 125
+/^Big tit lovers unite\.$|\bcum.?(shoo?ts|slurp)|swallow(ing)? cum\b|\bcum\b.*swallow(ing)?|\b(ass|arse).?fucking|(tight|wet|shaved|young|teen)+ pussy|fuck.?fest|pussy.?juice|\bcum all over|compulsive masturbators agree|explicit hardcore|(nasty|teen).*\bsluts?|You received this mail because our records show that you have asked to receive|(TEEN|ANAL) FUCK SITE|delete this mail( now)? if (you|u) do not want porn|HARDCORE PORN|HORNY FARMGIRLS/ REJECT Body-Spamschutzregel 126
+# some nigerian scam phrases 128
+/^Dear.*(Fellow.*Entrepreneur|Achiever|adult.*webmaster|Internet.*user|Future.*Millionaire)/ REJECT Body-Spamschutzregel 129
+# Wg. Postfiy-Problem auskommentiert?! 130
+#/(Dan Dakova|(TO|Attn *)[;:]? *(The )?President *\/ *C\.?E\.?O\.?|STRICTLY CONFIDENTIAL BUSINESS PROPOSAL|MR(?:\.|=2e)? PATRICE MILLER|President of Crane International Trading Corp(?:\.|=2e)|44-775-281-5820|44-7799289001|44-7092374892|44-7092343325|JOSEPH NWOSU|HARRY KONGOLO|JAMES GIWA|(Umaru|Aminatou) Hamidu|PERSONAL AND STRICTLY CONFIDENTIAL|It is with my profound dignity that I write you this very important|REQUEST FOR URGENT BUSINESS|Marshall Kabba|WITH DUE RESPECT AND HUMIILITY I WRITE YOU|I GOT YOUR CONTACT THROUGH INTERNATIONAL BUSINESS|Your contact address got to me through the Internet|MOHAMMED(?:\.|=2e)?\s?ABACHA|will forward to you a duly signed POWER OF ATTORNEY|Edith M(?:\.|=2e)? Koromah|I must solicit your strictest confidence in this transaction|MRS(?:\.|=2e)? ?M.? ?SESE-SEKO|WIDOW OF LATE PRESIDENT MOBUTU|ATTN:\s*MANAGING DIRECTOR|PERMIT ME TO INFORM YOU OF MY DESIRE OF GOING INTO|MR MOMADOU LEY|I AM BARRISTER ABDULKARIMI A(?:\.|=2e)? BRUME|^\s*ATTN\s*;\s*$|BRAM KHUMALO|(Sandra|Jonas) Savimbi|Million\b.{0,40}\b(?:United States? Dollars?|USD)|BASED ON INFORMATION GATHERED ABOUT YOU|POSITION TO HELP US IN TRANSFER|Government of Nigeria|NIGERIAN? NATIONAL|Nigerian? Government|Bank of Nigeria|Mpeti Kabila|President LAURENT DESIRE KABILA|CLEMENT OSHODI|URGENT & CONFIDENTIAL BUSINESS PROPOSAL|DEPARMENT OF PETROLEUM RESOURCES|Federal Ministry of works and Housing in Nigeria|Director of Contracts and Finance Allocation|CHIENCHEN YU|Dangote Ahmed|CHRIS KAASA|I WAIT YOUR URGENT RESPONSE|PRESIDENT DAWUDU JAWARA|JAMES ADELEKE|I am soliciting your involvement in a business|MIRIAM ABACHA|wife of the (?:late )?Nigeria|Kamuzu Thandiwe)/ REJECT Body-Spamschutzregel 131
+# misc spam phrases 133
+/(Kathmandu Temple Kiff|Do You Have The Yen To Be a A Millionaire\?|This message is brought to you by BerryTrim Affiliate|A \$5,000 Investment in the Euro vs the dollar, "?properly positioned"?|Reply( back)? with "?remove"? in( the)? subject line|To be removed (send e?-?mail|from further mailings)|If you have the staff to field the leads I can generate|Do you need more Traffic to your website\?|herbal viagra)/ REJECT Body-Spamschutzregel 134
+# Covers off most of the double extension virus attachments- more you have 140
+# in one line the more efficient it is 141
+/^Content-Disposition: attachment;filename=".*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)"$/ REJECT Body-Spamschutzregel 142
+/^Content-Disposition: attachment;filename=.*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)$/ REJECT Body-Spamschutzregel 143
+/(filename|name)="(WTC|wtc|README)\.EXE"/ REJECT Body-Spamschutzregel 145
+/(filename|name)="(Happy99|Navidad|prettypark|pretty park|zipped_files|flcss|Msinit|wininit|msi216|readme|README|Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 146
+/(filename|name)="(dhcp*|Emanuel|kmbfejkm|NakedWife|Seicho_no_ie|JAMGCJJA|Sulfnbk)\.exe"/ REJECT Body-Spamschutzregel 147
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 148
+/to be removed[,]* please click.*link/ REJECT Body-Spamschutzregel 151
+# /to be removed[,]* from (the|my|our) (mailing|email|e-mail)*[ ]*list/ REJECT Body-Spamschutzregel 152
+/to be removed[,]* from.*(mailings|offers)/ REJECT Body-Spamschutzregel 153
+/to be removed[,]* from the list send a blank email/ REJECT Body-Spamschutzregel 154
+/to be removed[,]* [e]*[-]*mail.*with/ REJECT Body-Spamschutzregel 155
+/to remove[,]* please send a blank email/ REJECT Body-Spamschutzregel 156
+#/remove yourself from this list/ REJECT Body-Spamschutzregel 157
+/removed from our mail agents/ REJECT Body-Spamschutzregel 158
+/to remove yourself immediately/ REJECT Body-Spamschutzregel 159
+/to remove yourself from future/ REJECT Body-Spamschutzregel 160
+/Rem[o]*ve me fro[nm] any (furhter|further) mailings/ REJECT Body-Spamschutzregel 161
+/remove yourself from any future mailings/ REJECT Body-Spamschutzregel 162
+/to no longer receive this message reply/ REJECT Body-Spamschutzregel 163
+/to no longer receive messages click the link/ REJECT Body-Spamschutzregel 164
+/to no longer receive messages please click the link/ REJECT Body-Spamschutzregel 165
+/our broadcast email software/ REJECT Body-Spamschutzregel 166
+/there are no federal regulations or laws on (email|e-mail) advertising/ REJECT Body-Spamschutzregel 167
+/to receive (no|any) (further|future) (offers|mailings)/ REJECT Body-Spamschutzregel 168
+/do not wish to receive future (e-mail|email)/ REJECT Body-Spamschutzregel 169
+# /do not wish to receive (e-mail|email)/ REJECT Body-Spamschutzregel 170
+/unsubscribe from Virtumundo Rewards/ REJECT Body-Spamschutzregel 171
+/if you do not wish to receive email from me/ REJECT Body-Spamschutzregel 172
+/reply with the word remove in the subject line/ REJECT Body-Spamschutzregel 173
+/reply address on this email was active at the time this email was sent/ REJECT Body-Spamschutzregel 174
+/not a registered investment advisor/ REJECT Body-Spamschutzregel 175
+/sent by corporate micro mail manager/ REJECT Body-Spamschutzregel 176
+/to be stop future mailings/ REJECT Body-Spamschutzregel 177
+/to stop future mailings/ REJECT Body-Spamschutzregel 178
+/to be taken off the mailing list please click below/ REJECT Body-Spamschutzregel 179
+/sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 180
+/sent in compliance (with|of)/ REJECT Body-Spamschutzregel 181
+/compliance with the current federal legislation/ REJECT Body-Spamschutzregel 182
+/comply with proposed federal legislation/ REJECT Body-Spamschutzregel 183
+/permanently (deleted|removed) from our (database|list)/ REJECT Body-Spamschutzregel 184
+/to be removed your email from our mailing list/ REJECT Body-Spamschutzregel 185
+/this mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 186
+/this[ ]*message[ ]*is[ ]*being[ ]*sent[ ]*in[ ]*full[ ]*compliance/ REJECT Body-Spamschutzregel 187
+/this is a one[-\ ]*time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 188
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 189
+/cannot be considered spam/ REJECT Body-Spamschutzregel 190
+/cannot be considered as spam/ REJECT Body-Spamschutzregel 191
+/(respect|honor|honour) all removal requests/ REJECT Body-Spamschutzregel 192
+/no longer wish to receive these offers/ REJECT Body-Spamschutzregel 193
+/you will not receive this offer again/ REJECT Body-Spamschutzregel 194
+/this is not an unsolicited mail/ REJECT Body-Spamschutzregel 195
+/this email has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 196
+/has not been sent unsolicited/ REJECT Body-Spamschutzregel 197
+#/(wish|would) to be removed from (our|the)/ REJECT Body-Spamschutzregel 199
+/all removes (honored|honoured)/ REJECT Body-Spamschutzregel 200
+/To[ ]+remove[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 201
+/to[ ]+be[ ]+removed[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 202
+/removemenow@excite.com/ REJECT Body-Spamschutzregel 204
+/1800cruisesandtours\.com/ REJECT Body-Spamschutzregel 205
+/freewebdirect\.net/ REJECT Body-Spamschutzregel 206
+/new-herbalway\.com/ REJECT Body-Spamschutzregel 207
+/advantagesweb\.com/ REJECT Body-Spamschutzregel 208
+/phytohealing\.com/ REJECT Body-Spamschutzregel 209
+/tradersprophet\.com/ REJECT Body-Spamschutzregel 210
+/ugot2see\.com/ REJECT Body-Spamschutzregel 211
+/hotlatinparadise\.com/ REJECT Body-Spamschutzregel 212
+/pearlgolf\.com/ REJECT Body-Spamschutzregel 213
+/halloweenomania\.com/ REJECT Body-Spamschutzregel 214
+/gofortuneonline\.com/ REJECT Body-Spamschutzregel 215
+/scantexas\.com/ REJECT Body-Spamschutzregel 216
+/buildreferrals\.com/ REJECT Body-Spamschutzregel 217
+/removeyou\.com/ REJECT Body-Spamschutzregel 218
+/cashbackmall\.com/ REJECT Body-Spamschutzregel 219
+/pageitnow\.net/ REJECT Body-Spamschutzregel 220
+/easycream\.com/ REJECT Body-Spamschutzregel 221
+/optinrealbig\.com/ REJECT Body-Spamschutzregel 222
+/realgreatgifts\.com/ REJECT Body-Spamschutzregel 223
+/realcheapgifts\.com/ REJECT Body-Spamschutzregel 224
+/pillsofpleasure\.com/ REJECT Body-Spamschutzregel 225
+/greathealthpills\.com/ REJECT Body-Spamschutzregel 226
+/saverealbigdeals\.com/ REJECT Body-Spamschutzregel 227
+/saverealbigstore\.com/ REJECT Body-Spamschutzregel 228
+/realbigwinners\.com/ REJECT Body-Spamschutzregel 229
+/saverealbig\.com/ REJECT Body-Spamschutzregel 230
+/extremetraffic_rem@excite\.com/ REJECT Body-Spamschutzregel 232
+/tccoptin@yahoo\.com/ REJECT Body-Spamschutzregel 233
+/tccoptout@yahoo.com/ REJECT Body-Spamschutzregel 234
+/stop026@excite\.com/ REJECT Body-Spamschutzregel 235
+/pleasestopsending@hotmail.com/ REJECT Body-Spamschutzregel 236
+/viperdrawing@winning.com/ REJECT Body-Spamschutzregel 237
+/mailto:.*\@.*\?subject\=(3D)*(remove|removeme|pleasedelete|pleaseremove|deleteme)+/ REJECT Body-Spamschutzregel 238
+/StudioPros/ REJECT Body-Spamschutzregel 240
+/universal advertising systems/ REJECT Body-Spamschutzregel 241
+/androstenone pheromone concentrate/ REJECT Body-Spamschutzregel 242
+/message was sent by a[n]* independent advertising company/ REJECT Body-Spamschutzregel 243
+/amazing cash products/ REJECT Body-Spamschutzregel 244
+/penis.*growth/ REJECT Body-Spamschutzregel 245
+/vortex[ ]+supplies/ REJECT Body-Spamschutzregel 246
+/international trade sources llc/ REJECT Body-Spamschutzregel 247
+/postmasterdirect inc/ REJECT Body-Spamschutzregel 248
+/free no obligation consultation/ REJECT Body-Spamschutzregel 249
+/voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 250
+/get back.*years of your income taxes/ REJECT Body-Spamschutzregel 251
+/click here for your free quote/ REJECT Body-Spamschutzregel 252
+/click here to be (permanently)* ?(removed|deleted)/ REJECT Body-Spamschutzregel 253
+/to unsubscribe do nothing/ REJECT Body-Spamschutzregel 254
+/OTCBB Stock Alert/ REJECT Body-Spamschutzregel 255
+/apparently you have filled out an online form/ REJECT Body-Spamschutzregel 257
+/list management software will not know/ REJECT Body-Spamschutzregel 258
+/message will only be sent once/ REJECT Body-Spamschutzregel 259
+/found this company on the internet/ REJECT Body-Spamschutzregel 260
+/you will not receive any future mailings/ REJECT Body-Spamschutzregel 261
+/all removal requests are (honored|honoured)/ REJECT Body-Spamschutzregel 262
+/you will be removed from our mailing[ ]*list and receive no further information from us/ REJECT Body-Spamschutzregel 263
+/we include contact information and a method to be removed from our mailing[ ]*list/ REJECT Body-Spamschutzregel 264
+/there is no need to unsubscribe/ REJECT Body-Spamschutzregel 265
+/I have made every attempt to target this message/ REJECT Body-Spamschutzregel 266
+/If you do not wish to be on our list then click here/ REJECT Body-Spamschutzregel 267
+/If you are not interested in receiving information/ REJECT Body-Spamschutzregel 268
+/your request will be (honored|honoured) with prompt removal/ REJECT Body-Spamschutzregel 269
+/if you feel you got this e[-]*mail by mistake/ REJECT Body-Spamschutzregel 270
+/to have us permanently remove you from our list/ REJECT Body-Spamschutzregel 271
+/we guarantee you will not receive any future e[-]*mails from us/ REJECT Body-Spamschutzregel 272
+/if you would rather not receive future e[-]*mails/ REJECT Body-Spamschutzregel 273
+/we do not intend to send any future e[-]*mails/ REJECT Body-Spamschutzregel 274
+/further emailing to you by the of this email may be stopped/ REJECT Body-Spamschutzregel 275
+/by the of this email may be stopped/ REJECT Body-Spamschutzregel 276
+/receiving this e[-]*mail because you opted[-\ ]in/ REJECT Body-Spamschutzregel 277
+/this email has been sent to you because someone at this e[-]*mail address/ REJECT Body-Spamschutzregel 278
+/to have your name removed from our email database/ REJECT Body-Spamschutzregel 279
+/stopped at no cost to you by sending a reply to this e[-]*mail address/ REJECT Body-Spamschutzregel 280
+/this message is an advertisement/ REJECT Body-Spamschutzregel 281
+/immediately removed from receiving any more information/ REJECT Body-Spamschutzregel 282
+/would not like to receive future messages/ REJECT Body-Spamschutzregel 283
+/tell us you would not like to continue to receive such e[-]*mails/ REJECT Body-Spamschutzregel 284
+/advertise your product or service using bulk email services/ REJECT Body-Spamschutzregel 285
+/You have been specially selected to qualify/ REJECT Body-Spamschutzregel 286
+/while working from the privacy of your own home/ REJECT Body-Spamschutzregel 287
+/e[-]*mail messages may be stopped/ REJECT Body-Spamschutzregel 288
+/list removal\/opt[-\ ]*out/ REJECT Body-Spamschutzregel 289
+/this is a no obligation qualification form/ REJECT Body-Spamschutzregel 290
+/please notify the sender immediately with .*remove/ REJECT Body-Spamschutzregel 291
+/home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 292
+/(filename|name)="(Happy99|Navidad|prettypark)\.exe"/ REJECT Body-Spamschutzregel 294
+/(filename|name)="(pretty park|zipped_files|flcss)\.exe"/ REJECT Body-Spamschutzregel 295
+/(filename|name)="(Msinit|wininit|msi216|CFGWIZ31)\.exe"/ REJECT Body-Spamschutzregel 296
+/(filename|name)="(Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 297
+/(filename|name)="(Emanuel|kmbfejkm|NakedWife|Readme|readme)\.exe"/ REJECT Body-Spamschutzregel 298
+/(filename|name)="(Seicho_no_ie|JAMGCJJA|Sulfnbk|QuickLnk)\.exe"/ REJECT Body-Spamschutzregel 299
+/(filename|name)="(Readme|readme)\.eml"/ REJECT Body-Spamschutzregel 300
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 302
+/Rem I am sorry/ REJECT Body-Spamschutzregel 303
+/Te mando este archivo para que me des tu punto de vista/ REJECT Body-Spamschutzregel 304
+/I send you this file in order to have your advice/ REJECT Body-Spamschutzregel 305
+/Espero me puedas ayudar con el archivo que te mando/ REJECT Body-Spamschutzregel 306
+/Espero te guste este archivo que te mando/ REJECT Body-Spamschutzregel 307
+/Este es el archivo con la informaci� que me pediste/ REJECT Body-Spamschutzregel 308
+/I hope you can help me with this file that I send/ REJECT Body-Spamschutzregel 309
+/I hope you like the file that I send you/ REJECT Body-Spamschutzregel 310
+/This is the file with the information that you ask for/ REJECT Body-Spamschutzregel 311
+/0 Business Fax Numbers/ REJECT Body-Spamschutzregel 314
+/1[-\ ]Time Mailling/ REJECT Body-Spamschutzregel 315
+/30 day money back guarantee/ REJECT Body-Spamschutzregel 316
+/A New Loan Makes Sense/ REJECT Body-Spamschutzregel 317
+/Advertise your product or service/ REJECT Body-Spamschutzregel 318
+/Aging While Burning Fat/ REJECT Body-Spamschutzregel 319
+/Amazing cash products/ REJECT Body-Spamschutzregel 320
+/Androstenone/ REJECT Body-Spamschutzregel 321
+/Attract Members of The Opposite/ REJECT Body-Spamschutzregel 322
+/Automatic Stock Picking Software/ REJECT Body-Spamschutzregel 323
+/Bad Credit Is History/ REJECT Body-Spamschutzregel 324
+/Banner Advertising Price/ REJECT Body-Spamschutzregel 325
+/Barnyard Fucking/ REJECT Body-Spamschutzregel 326
+/BEAUTIFUL Women On The Web/ REJECT Body-Spamschutzregel 327
+/Because Our Records Indicate That You Are A/ REJECT Body-Spamschutzregel 328
+# /Because You Agree/ REJECT Body-Spamschutzregel 329
+/Because You Have Subscribed To One Of Our/ REJECT Body-Spamschutzregel 330
+#/Because You Registered/ REJECT Body-Spamschutzregel 331
+/Because You Signed Up At One/ REJECT Body-Spamschutzregel 332
+/Best Porn/ REJECT Body-Spamschutzregel 333
+/Buy Preforeclosure Houses/ REJECT Body-Spamschutzregel 334
+/Cable TV Descrambler/ REJECT Body-Spamschutzregel 335
+/Cannot be Considered Spam/ REJECT Body-Spamschutzregel 336
+/Cannot be Considered As Spam/ REJECT Body-Spamschutzregel 337
+/Caso nao desejar receber este tipo de email novamente/ REJECT Body-Spamschutzregel 338
+/Click Here For Your Free Quote/ REJECT Body-Spamschutzregel 339
+/Click Here To Avoid This In The Future/ REJECT Body-Spamschutzregel 340
+/Compliance with the current federal legislation/ REJECT Body-Spamschutzregel 341
+/Copy DVD Movies/ REJECT Body-Spamschutzregel 343
+/Creating Immediate Wealth/ REJECT Body-Spamschutzregel 344
+/Cum Shots/ REJECT Body-Spamschutzregel 345
+/Dear Future/ REJECT Body-Spamschutzregel 348
+#/Dear Entrepreneur/ REJECT Body-Spamschutzregel 349
+/Debt Consolidation/ REJECT Body-Spamschutzregel 350
+/Do You Want Financial/ REJECT Body-Spamschutzregel 351
+/Don't Need A Prescription/ REJECT Body-Spamschutzregel 352
+/E[-\ ]Mail Bill Section 301/ REJECT Body-Spamschutzregel 353
+/Earn A Full Time Income/ REJECT Body-Spamschutzregel 354
+/Easily Lose Weight/ REJECT Body-Spamschutzregel 355
+/Equalamail/ REJECT Body-Spamschutzregel 356
+/Email Bill Section 301/ REJECT Body-Spamschutzregel 357
+/Erotic Travel Guide/ REJECT Body-Spamschutzregel 358
+/Fat Blocker/ REJECT Body-Spamschutzregel 359
+/Fellow Internet entrepeneur/ REJECT Body-Spamschutzregel 360
+/Figure Income Earners/ REJECT Body-Spamschutzregel 361
+/Find Out Anything About Anyone/ REJECT Body-Spamschutzregel 362
+/Fix Your Credit/ REJECT Body-Spamschutzregel 363
+/Found this company on the internet/ REJECT Body-Spamschutzregel 364
+/Free Bulk Email/ REJECT Body-Spamschutzregel 365
+/Free Direct Email/ REJECT Body-Spamschutzregel 367
+/Free Multiple Moving Cost/ REJECT Body-Spamschutzregel 368
+/Free no obligation/ REJECT Body-Spamschutzregel 369
+/Free Private Webcam/ REJECT Body-Spamschutzregel 370
+/Free S e x/ REJECT Body-Spamschutzregel 371
+/Free Sex/ REJECT Body-Spamschutzregel 372
+/Free Vacation Giveaway/ REJECT Body-Spamschutzregel 373
+/Free XXX/ REJECT Body-Spamschutzregel 374
+/From A Concerned Gas User/ REJECT Body-Spamschutzregel 375
+/Get back.*years of your income taxes/ REJECT Body-Spamschutzregel 376
+/Government Grants E-Book/ REJECT Body-Spamschutzregel 377
+/GROWTH HORMONE RELEASER/ REJECT Body-Spamschutzregel 378
+/Hardcore Animal Action/ REJECT Body-Spamschutzregel 379
+/Hardcore Barnyard/ REJECT Body-Spamschutzregel 380
+/Hardcore Fist/ REJECT Body-Spamschutzregel 381
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 382
+/Home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 383
+/Has not been sent unsolicited/ REJECT Body-Spamschutzregel 384
+/I Will Personally Show You How/ REJECT Body-Spamschutzregel 385
+/Independent advertising company/ REJECT Body-Spamschutzregel 386
+/Incredible Life Changing/ REJECT Body-Spamschutzregel 387
+/It Has Been Going Since/ REJECT Body-Spamschutzregel 388
+/Hardcore Animal/ REJECT Body-Spamschutzregel 389
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 390
+/Hardcore Teens/ REJECT Body-Spamschutzregel 391
+/Hardcore Unsuspecting/ REJECT Body-Spamschutzregel 392
+/Has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 393
+/Hear About Future Offers From Us/ REJECT Body-Spamschutzregel 394
+/Hear About Offers From Us/ REJECT Body-Spamschutzregel 395
+/Hot Horny Girls/ REJECT Body-Spamschutzregel 396
+/Hot Young Nasty/ REJECT Body-Spamschutzregel 397
+/Huge Wild Animals/ REJECT Body-Spamschutzregel 398
+/Improve Sexual Vigor/ REJECT Body-Spamschutzregel 399
+#/If you no longer wish to receive/ REJECT Body-Spamschutzregel 400
+/If you prefer not to receive future emails/ REJECT Body-Spamschutzregel 401
+/I'm a total exibitionist/ REJECT Body-Spamschutzregel 402
+/Im a total exibitionist/ REJECT Body-Spamschutzregel 403
+/In Compliance With The New E[-\ ]Mail Bill/ REJECT Body-Spamschutzregel 404
+#/Interest rates are rising/ REJECT Body-Spamschutzregel 405
+/Just ONE click away from showing you/ REJECT Body-Spamschutzregel 406
+/Lender referral service/ REJECT Body-Spamschutzregel 407
+/Lenders Compete For Your Business/ REJECT Body-Spamschutzregel 408
+/Life Changing Opportunity/ REJECT Body-Spamschutzregel 409
+/Lips Around Your/ REJECT Body-Spamschutzregel 410
+/Locate Hidden Assets/ REJECT Body-Spamschutzregel 411
+/Lose Pounds And Inches/ REJECT Body-Spamschutzregel 412
+/Lose Some Weight Before/ REJECT Body-Spamschutzregel 413
+/Low[-\ ]Cost Viagra/ REJECT Body-Spamschutzregel 414
+/Lowest Mortgage/ REJECT Body-Spamschutzregel 415
+/Make money online/ REJECT Body-Spamschutzregel 416
+# /Marketing Method/ REJECT Body-Spamschutzregel 417
+/Million E[-\ ]mail Addresses/ REJECT Body-Spamschutzregel 418
+/Million Email Addresses/ REJECT Body-Spamschutzregel 419
+/Minutes To Complete Your Order/ REJECT Body-Spamschutzregel 420
+/Much More Effective For Both Partners/ REJECT Body-Spamschutzregel 421
+/Mortgage Quote/ REJECT Body-Spamschutzregel 422
+/Need Fod Adult Entertainment/ REJECT Body-Spamschutzregel 423
+/Never Sends Unsolicited Email/ REJECT Body-Spamschutzregel 424
+/No[-\ ]Spam Policy/ REJECT Body-Spamschutzregel 425
+/On my personal live Webcam/ REJECT Body-Spamschutzregel 427
+/One[-\ ]Time Mail/ REJECT Body-Spamschutzregel 428
+/One[-\ ]Time Non[-\ ]Commercial/ REJECT Body-Spamschutzregel 429
+/Opt-In To Our/ REJECT Body-Spamschutzregel 430
+/Opt-Out From Our/ REJECT Body-Spamschutzregel 431
+/Our Herbal Supplement/ REJECT Body-Spamschutzregel 432
+/Owning your first home/ REJECT Body-Spamschutzregel 433
+/Partner E[-\ ]mail Offers/ REJECT Body-Spamschutzregel 434
+/Partner Email Offers/ REJECT Body-Spamschutzregel 435
+/Penis.*growth/ REJECT Body-Spamschutzregel 436
+/Permanently (deleted|removed) From Our/ REJECT Body-Spamschutzregel 437
+/Permission Based E[-\ ]mail/ REJECT Body-Spamschutzregel 438
+/Permission Based Email/ REJECT Body-Spamschutzregel 439
+/Pheromone Concentrate/ REJECT Body-Spamschutzregel 440
+/Potent Pheromone/ REJECT Body-Spamschutzregel 441
+/Price Discount for New TLD Extensions/ REJECT Body-Spamschutzregel 442
+/Quality Amateur Action/ REJECT Body-Spamschutzregel 443
+/Ready to refinance/ REJECT Body-Spamschutzregel 444
+/Real Live Cameras And Movies/ REJECT Body-Spamschutzregel 445
+/Real LiveCameras And Movies/ REJECT Body-Spamschutzregel 446
+/Receive Special Offer/ REJECT Body-Spamschutzregel 447
+/Reduce Body Fat/ REJECT Body-Spamschutzregel 448
+/Refinance Your Home/ REJECT Body-Spamschutzregel 449
+/Second Mortgage/ REJECT Body-Spamschutzregel 450
+/Secure A Better Life For/ REJECT Body-Spamschutzregel 451
+/See How Much You Can Save/ REJECT Body-Spamschutzregel 452
+/Sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 453
+/Sent To You By A Marketing Partner/ REJECT Body-Spamschutzregel 454
+/Sent in compliance (with|of)/ REJECT Body-Spamschutzregel 455
+/Serious Inquiries Only Please/ REJECT Body-Spamschutzregel 456
+/Shop Hundreds Of Lenders/ REJECT Body-Spamschutzregel 457
+/Start Making $1/ REJECT Body-Spamschutzregel 458
+/Step To Financial Freedom/ REJECT Body-Spamschutzregel 459
+/Steps To Financial Freedom/ REJECT Body-Spamschutzregel 460
+/Suck My Cock/ REJECT Body-Spamschutzregel 461
+/Take A FREE Trip/ REJECT Body-Spamschutzregel 462
+/TAKE YOUR FIRST BIG STEP/ REJECT Body-Spamschutzregel 463
+/Targeted E[-\ ]mail List/ REJECT Body-Spamschutzregel 464
+/Targeted Email List/ REJECT Body-Spamschutzregel 465
+/The following gift or special offer was sent to you/ REJECT Body-Spamschutzregel 466
+/This email is not sent unsolicited/ REJECT Body-Spamschutzregel 467
+/This Is A One[-\ ]*Time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 468
+/This mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 469
+/To Be Removed From This Targeted/ REJECT Body-Spamschutzregel 470
+/To Claim Your Prize Click/ REJECT Body-Spamschutzregel 471
+/To Stop All Future Offers/ REJECT Body-Spamschutzregel 472
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 473
+/Universal Advertising System/ REJECT Body-Spamschutzregel 474
+/Unlimited Phone Conversations/ REJECT Body-Spamschutzregel 475
+/Using Your Identity/ REJECT Body-Spamschutzregel 476
+/Virtumundo/ REJECT Body-Spamschutzregel 477
+/Voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 478
+/We can award any degree/ REJECT Body-Spamschutzregel 479
+/We know it sounds impossible/ REJECT Body-Spamschutzregel 480
+# /Weight Loss [Drug\Medication]/ REJECT Body-Spamschutzregel 481
+/While working from the privacy of your own home/ REJECT Body-Spamschutzregel 482
+/Win Big Money Today/ REJECT Body-Spamschutzregel 483
+/Without Pumps Or Weights Or Stretches/ REJECT Body-Spamschutzregel 484
+/Wouldn't You Like Your Husband Or Boyfriend To Have/ REJECT Body-Spamschutzregel 485
+/You Agree To Receive Email Marketing From/ REJECT Body-Spamschutzregel 486
+/You Are Receiving This Exclusive Promotion/ REJECT Body-Spamschutzregel 487
+/You Are Registered At One Of Our/ REJECT Body-Spamschutzregel 488
+/You are receiving this mail because you have/ REJECT Body-Spamschutzregel 489
+/You Have Agreed To Receive/ REJECT Body-Spamschutzregel 490
+/You Can Search For Anyone/ REJECT Body-Spamschutzregel 491
+/You've Agreed To Receive/ REJECT Body-Spamschutzregel 492
+/You Registered At One Of Our/ REJECT Body-Spamschutzregel 493
+/You've Registered At One Of Our/ REJECT Body-Spamschutzregel 494
+/Your E[-\ ]mail Address Was Obtained/ REJECT Body-Spamschutzregel 495
+/Your Email Address Was Obtained/ REJECT Body-Spamschutzregel 496
+/Your Email Address Was Supplied/ REJECT Body-Spamschutzregel 497
+/Your Mail Address Was Supplied/ REJECT Body-Spamschutzregel 498
+/Your Penis Size/ REJECT Body-Spamschutzregel 499
+/Smart Tags, Smart Investments?/ REJECT Body-Spamschutzregel 500
+/faze the Neptune focal point and strive enterprising/ REJECT Body-Spamschutzregel 501
+/full moon insistence gist an packed/ REJECT Body-Spamschutzregel 502
+/a upward prominently field day health care the ridicule offing or Internet seemingly/ REJECT Body-Spamschutzregel 503
+/fanatic but consistency sluice scrape downtrodden five and ten on needless/ REJECT Body-Spamschutzregel 504
+/fuse box sick sister/ REJECT Body-Spamschutzregel 505
+/immediate fulfillment big deal and cashier/ REJECT Body-Spamschutzregel 506
+/in on parakeet quizzical chicken feed leper on square/ REJECT Body-Spamschutzregel 508
+/reference ounce a achiever sunblock syringe roadside longevity/ REJECT Body-Spamschutzregel 509
+/ocean distrust as antiperspirant coax lubricant entry, the northwestern politicize,/ REJECT Body-Spamschutzregel 510
+/By the time Scarlett had undressed and blown out the candle, her/ REJECT Body-Spamschutzregel 511
+/E-MAIL:czq7q67a@yahoo.co.jp/ REJECT Body-Spamschutzregel 512
--- /dev/null
+# Version 3.69 / 8.6.2011
+#
+# Das Postfix-Buch - Sichere Mailserver mit Linux
+# http://www.postfixbuch.de
+#
+# Heinlein Professional Linux Support GmbH
+# http://www.heinlein-support.de
+#
+# Downloadquelle dieser Datei: http://www.postfixbuch.de/web/service/checks/
+#
+#
+# Verwendung der Filtersammlung auf eigene Gefahr.
+#
+# Es handelt sich dabei um einen tagesaktuellen Auszug der beim
+# ISP "JPBerlin.de" genutzten Filterregeln. Bitte pruefen Sie vor einem
+# Einsatz bei Ihnen ganz genau, ob diese Regeln noch aktuell und sinnvoll
+# sind und ob Sie sie einsetzen moechten!
+#
+#
+# Setzen Sie in /etc/postfix/main.cf einfach
+#
+# body_checks = pcre:/etc/postfix/body_checks oder
+# oder
+# body_checks = regexp:/etc/postfix/body_checks
+#
+# und fuehren Sie "rcpostfix reload" aus.
+#
+# Tipp: pcre ist ein Drittel schneller als regexp!
+#
+#
+
+#
+# Die Nummern hinter dem REJECT tauchen spaeter iM SMTP-Error oder im Log
+# auf, um die Filter-Regel wiederzufinden, die den Block ausgeloest hat.
+# Es kann stattdessen auch einfacher Text benutzt werden.
+#
+
+
+/^Received: from mail pickup service by EXDO01.stricker-marsch.de with Microsoft SMTPSVC.*/ REJECT Mailloopbomb bitte anrufen
+
+#
+#
+# Tagesaktuelle, nur voruebergehende Regelungen:
+# ===============================================
+# [Immer mit Timestamp (!) und ggf. Ticket-Nummer eintragen!]
+#
+
+/alexatrej14913.blogspot.com/ REJECT
+/m-back22.ocn.ad.jp/ REJECT
+/Received: from 83.3.224.146/ REJECT
+/<HTML><HEAD><TITLE>Western Union Alerts./ REJECT
+/http:\/\/www.rocktonchamber.com/ REJECT
+
+#
+#
+# Dauerhaft genutzte Regelungen:
+# ===============================================
+# [Immer mit aufsteiger Nummer sauber eintragen!]
+#
+#
+/http:\/\/sonofages.free.fr\/images\/LogoCreditMutuel.png/ REJECT Body-Spamschutzregel 1133
+/ucc.edu.ni/ REJECT Body-Spamschutzregel 1132
+/7figureincome\.php/ REJECT Body-Spamschutzregel 1131
+/Cher Client Verified by Visa/ REJECT Body-Spamschutzregel 1130
+/^From: "Topillen Apotheke" / REJECT Body-Spamschutzregel 1129
+/^Aufgrund mehrerer Phishing Versuche, unsere Visa und Mastercard/ REJECT Body-Spamschutzregel 1128
+/^ Phishing Departament/ REJECT Body-Spamschutzregel 1127
+/We wish to invest between $5Million-$100Million in any viable projects/ REJECT Body-Spamschutzregel 1126
+/God bless you as you get back to me/ REJECT Body-Spamschutzregel 1125
+/www.(b|B)ien(e|E)tremag.com/ REJECT Body-Spamschutzregel 1124
+/Sehr geehrte Sparkasse Card/ REJECT Body-Spamschutzregel 1123
+/zigaretten-discount.info/ REJECT Body-Spamschutzregel 1122
+/zigaretten-discount\[punkt\]info/ REJECT Body-Spamschutzregel 1121
+/Guten Tag Mitglied [0-9]{5}/ REJECT Body-Spamschutzregel 1120
+/elenx.innovacon.com\/.e\/e.php/ REJECT Body-Spamschutzregel 1119
+/www.sniperrs.de\/modules\/Forums\/admin/ REJECT Body-Spamschutzregel 1118
+/boxneufnet.com\/id\/oragne.fr\/Identifiant/ REJECT Body-Spamschutzregel 1117
+/www.colellsa.com\/img\/quienes\/pabo\/paypal-fr/ REJECT Body-Spamschutzregel 1116
+/dekmor.cmu.ac.th\/sticker\/upload\/Logs\/Login\/webscrcmd/ REJECT Body-Spamschutzregel 1115
+/ektoschronou.com/ REJECT Body-Spamschutzregel 1114
+/ulouwaio.com/ REJECT Body-Spamschutzregel 1113
+/logonature.com.nu/ REJECT Body-Spamschutzregel 1112
+/suinlop.com/ REJECT Body-Spamschutzregel 1111
+/soudoorpo.com/ REJECT Body-Spamschutzregel 1110
+/GOOGLE AUSSTATTUNGSFONDS 20.?.? GEWINNER ANMELDEFORMULAR FUER ZAHLUNG/ REJECT Body-Spamschutzregel 1109
+/Anbieter: Privacy GG Limited, 99 Albert Street, Belize City, CA/ REJECT Body-Spamschutzregel 1108
+/^Die Nachricht wurde durch Interads 24 Ltd/ REJECT Body-Spamschutzregel 1107
+/www.sommer-mit-kollegen.de/ REJECT Body-Spamschutzregel 1006
+# Ein Spammer versenden immer Austragungslinks, die auf "/ausa" enden:
+/^www.*\/ausa$/ REJECT Body-Spamschutzregel 1105
+/KlickTel Telefonbuch OEM/ REJECT Body-Spamschutzregel 1104
+/www.klicktel24.org/ REJECT Body-Spamschutzregel 1103
+/Klicken Sie hier, und fühlen Sie sich endlich gut behandelt:/ REJECT Body-Spamschutzregel 1102
+/maryjanemax@yahoo.co.uk/ REJECT Body-Spamschutzregel 1101
+/http.*muqugeh\.cn/ REJECT Body-Spamschutzregel 1100
+/Bei uns bekommen Sie Ihren Kredit schnell, unbürokratisch, diskret und natürlich ohne Bankauskunft./ REJECT Body-Spamschutzregel 1099
+/INTERNATIONAL LOTTERIE PROMOTION SPIELGEMEINSCHAFT/ REJECT Body-Spamschutzregel 1098
+/Leider st=F6ren Sie.=20/ REJECT Body-Spamschutzregel 1097
+/Sie haben dieses Email erhalten, weil Sie im Newsletter von Promohouse Ltd eingetragen sind/ REJECT Body-Spamschutzregel 1096
+/ATTN: Beneficiar/ REJECT Body-Spamschutzregel 1095
+/www.hedonismails.de/ REJECT Body-Spamschutzregel 1094
+/www.globadressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1093
+/elegalal.nextmail.ru/ REJECT Body-Spamschutzregel 1092
+/http:\/\/www.switzerlandpussy.eu/ REJECT Body-Spamschutzregel 1082
+/Die jungen Girls fliegen nur so auf die langen/ REJECT Body-Spamschutzregel 1081
+/\*\*\*\* Commercial use of this software is prohibited \*\*\*\*/ REJECT Body-Spamschutzregel 1080
+/I finded your email in internet and I decide to ask you for help/ REJECT Body-Spamschutzregel 1079
+/Details und moegliche Schritte zur Entsperrung finden Sie/ REJECT Body-Spamschutzregel 1078
+/^Amount Won:/ REJECT Body-Spamschutzregel 1077
+/AWARD WINNING NOTICE/i REJECT Body-Spamschutzregel 1076
+/mixvarejo.com/ REJECT Body-Spamschutzregel 1075
+/www.global-db.(com|net|org)/ REJECT Body-Spamschutzregel 1074
+/^I am Barrister/ REJECT Body-Spamschutzregel 1073
+/respublica@gaucherepublicaine.org/ REJECT Body-Spamschutzregel 1072
+/NEU - Vi Super Active/ REJECT Body-Spamschutzregel 1071
+/anhaltende Versagensangste und wiederholte peinliche Situationen/ REJECT Body-Spamschutzregel 1070
+/Schulfreunde Vermittlungs Service AG/ REJECT Body-Spamschutzregel 1068
+/Multimedia Telegramm/ REJECT Body-Spamschutzregel 1067
+/http.*\.fdub\.biz/ REJECT Body-Spamschutzregel 1066
+/TanjaGuenther/ REJECT Body-Spamschutzregel 1065
+/www.bestnetz24.de\/letter\/ausgabe.php/ REJECT Body-Spamschutzregel 1064
+/www.db.?adressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1063
+/thomas@jthomas.es/ REJECT Body-Spamschutzregel 1062
+/Ihre Marketing Agentur Espa/ REJECT Body-Spamschutzregel 1061
+/www.pakandu.com/ REJECT Body-Spamschutzregel 1060
+/Glob.?.?.?(C|K)ontact.?.?.?Team/ REJECT Body-Spamschutzregel 1059
+/www.gc.?datenbaken.(com|net|org|info)/ REJECT Body-Spamschutzregel 1058
+/www.glc-?data.(com|net|org|info)/ REJECT Body-Spamschutzregel 1057
+/Global.?(C|K)ontact/i REJECT Body-Spamschutzregel 1056
+/www.imarketing.com.br.remove/ REJECT Body-Spamschutzregel 1055
+/Bestellen Sie jetzt und vergessen Sie Ihre Enttauschungen/ REJECT Body-Spamschutzregel 1054
+/Online Apotheke - original Qualitaet/ REJECT Body-Spamschutzregel 1053
+/Wir wissen was Frauen wollern/ REJECT Body-Spamschutzregel 1052
+/Viiiiaaaaaagra/ REJECT Body-Spamschutzregel 1051
+/Web: www.eurasianpages. com/ REJECT Body-Spamschutzregel 1050
+/^Firma Global Contact bietet Ihnen/ REJECT Body-Spamschutzregel 1049
+/www.g-adressen.net/ REJECT Body-Spamschutzregel 1048
+/NIEMALS geben Sie Ihre Passw.rter an niemanden NUR und melden Sie sich/ REJECT Body-Spamschutzregel 1047 Haspa-Pishing
+/www.loteria.es/ REJECT Body-Spamschutzregel 1046
+/Girls! Deveelop your sexual reelationship and get even MORE pleasurre!/ REJECT Body-Spamschutzregel 1045
+# Nigeria-Spam / phei 20080209
+/Ich bin bei einer routinen Überprüfung in meiner Bank/ REJECT Body-Spamschutzregel 1044
+/Ich vermute das diese E-Mail eine Überraschung für Sie sein wird/ REJECT Body-Spamschutzregel 1043
+/Ich bin bei einer routinen Überprüfung in meiner Bank / REJECT Body-Spamschutzregel 1042
+# Versendet UBE/UCE unter verbraucher@wichtig.ms
+/^Ein Dienst der IT4YOU AG, Friedrichstrasse 171, Berlin - Mitte als/ REJECT Body-Spamschutzregel 1041
+# Versendet KlickTel UBE/UCE: / phei 20080204
+/^www.cdtophit.org/ REJECT Body-Spamschutzregel 1040
+/http:\/\/www\.doenertreff\.de/ REJECT Body-Spamschutzregel 1039
+/Brauchen Sie noch einen Grund um zu Vegas VIP Casino/ REJECT Body-Spamschutzregel 1038
+/glob-contact.net$/ REJECT Body-Spamschutzregel 1037: glob-contact
+/^Ihr Glob-Kontakt-Team$/ REJECT Body-Spamschutzregel 1036: glob-contact
+/www.feilervision.de/ REJECT Body-Spamschutzregel 1035: feilervision
+/DER INVESTORALARM!/i REJECT Body-Spamschutzregel 1034
+/ES IST EIN UNGLAUBLICHES PROFITPOTENTIAL! VERLIERE DIESE CHANCE NICHT!/i REJECT Body-Spamschutzregel 1033
+/LOTTERY AND GAMING INTERNET MESSAGE CENTRE/ REJECT Body-Spamschutzregel 1033
+/I work very hard every day to be able to buy necessities for my mother/ REJECT Body-Spamschutzregel 1032
+/THE FREELOTTO COMPANY/ REJECT Body-Spamschutzregel 1031
+/BreakingMrktNews/ REJECT Body-Spamschutzregel 1030
+/China Media Crop OTC.BB CHMD/ REJECT Body-Spamschutzregel 1029
+/Weltweit gilt das nummerierte TAN-Verfahren als eines der sicherste/ REJECT Body-Spamschutzregel 1028: Postbank-Pishing
+/^Marion Beckera/ REJECT Body-Spamschutzregel 1027
+/Zwecks abschließende Zustimmung für deine Verhandlung zur/ REJECT Body-Spamschutzregel 1026
+/annullieren deine on-line Übertragung® Dienstleistungen./ REJECT Body-Spamschutzregel 1025
+/www.internetloginuser.info/ REJECT Body-Spamschutzregel 1024
+/realsevgi.com/ REJECT Body-Spamschutzregel 1023
+/Um mich zu entlasten, schicke ich Ihnen das (...) Foto wieder zurück./ REJECT Body-Spamschutzregel 1022
+/Oder Ihr Provider hat die Mail falsch weiter geleitet!?/ REJECT Body-Spamschutzregel 1021
+/Versatel-Attachment-Warning.txt/ REJECT Body-Spamschutzregel 1020
+/www=2Eanaforturizm=2Ecom/ REJECT Body-Spamschutzregel 1019
+/www.anaforturizm.com/ REJECT Body-Spamschutzregel 1018
+/The Jpberlin Support Team/ REJECT Body-Spamschutzregel 1017: Pishing-Mails
+/^jpberlin.de support team\./ REJECT Body-Spamschutzregel 1016: Pishing-Mails
+/You have successfully updated the password of your Jpberlin account/ REJECT Body-Spamschutzregel 1015
+/www.ru4mailnow.com/ REJECT Body-Spamschutzregel 1014
+/EXPLOSIVE PICK FOR OUR MEMBERS/ REJECT Body-Spamschutzregel 1013
+/AntiVirus-System: Kein Virus erkannt/ REJECT Body-Spamschutzregel 1012
+/--- FIFA Fussball-Weltmeisterschaft 2006/ REJECT Body-Spamschutzregel 1011
+/ankara@ankararentacar.de/ REJECT Body-Spamschutzregel 1010
+/Replica Watch Models/ REJECT Body-Spamschutzregel 1009
+/Diadem Travel/ REJECT Body-Spamschutzregel 1008
+/Let the search engine experts compete/ REJECT Body-Spamschutzregel 1007
+/Wenn du sonst noch helfen willst, dann verschick diese Nachricht einfach so oft du willst./ REJECT Body-Spamschutzregel 1006
+/http:\/\/www.ehmig.net\/web_mailer/ REJECT Body-Spamschutzregel 1005
+/http:\/\/real.slon.biz/ REJECT Body-Spamschutzregel 1004
+#/im Zusammenhang mit dem Arbeitslosengeld II/ REJECT Body-Spamschutzregel 1003
+/www.inverz.org/ REJECT Body-Spamschutzregel 1002
+/www.inverz.net/ REJECT Body-Spamschutzregel 1001
+
+
+
+
+
+
+/We recommend you to follow the instructions in order to keep your computer safe./ REJECT Body-Spamschutzregel 1
+/Sieh Dir einfach mal ein Video an und mach dann gleich ein Treffen/ REJECT Body-Spamschutzregel 2
+#/money.*back.*guarant/ REJECT Body-Spamschutzregel 3
+/ CIALIS / REJECT Body-Spamschutzregel 4
+/www.galamed.biz/ REJECT Body-Spamschutzregel 5
+/Starts working in less than 15 min./ REJECT Body-Spamschutzregel 6
+/Adipren720/ REJECT Body-Spamschutzregel 7
+/www.lending-home.com/ REJECT Body-Spamschutzregel 8
+/bigbonus-casino.com/ REJECT Body-Spamschutzregel 9
+/Ich hab die ultimative Seite.*dich, klick doch mal an!/ REJECT Body-Spamschutzregel 10
+/www.server42.com/ REJECT Body-Spamschutzregel 11
+/seo-profits.com/ REJECT Body-Spamschutzregel 12
+/Have a great web site, but no one knows it even/ REJECT Body-Spamschutzregel 13
+/REVERZ.*D-INFO/ REJECT Body-Spamschutzregel 14
+/D-INFO.*REVERZ/ REJECT Body-Spamschutzregel 15
+/greatmaleenhancement.biz/ REJECT Body-Spamschutzregel 16
+/ Xanax / REJECT Body-Spamschutzregel 17
+/Vic(o|0)din/ REJECT Body-Spamschutzregel 18
+/Hydr(o|0)c(o|0)d(o|0)ne/ REJECT Body-Spamschutzregel 19
+/ V1agra / REJECT Body-Spamschutzregel 20
+/warehousefull.com/ REJECT Body-Spamschutzregel 21
+/No doctor visit needed/ REJECT Body-Spamschutzregel 22
+/KLICKTEL KENNT SIE!/ REJECT Body-Spamschutzregel 23
+/^www.femo-online.de/ REJECT Body-Spamschutzregel 24
+/www.land-ua.com/ REJECT Body-Spamschutzregel 25
+/Come to Loqozine/ REJECT Body-Spamschutzregel 26
+/^<center><.*a href=.*img src=.*border.*><\/a><\/center>$/ REJECT Body-Spamschutzregel Check 27
+/www.gord.us/ REJECT Body-Spamschutzregel 28
+/www.reverz.org/ REJECT Body-Spamschutzregel 29
+/wonderfulaction.com/ REJECT Body-Spamschutzregel 30
+/At our pharmacy we offer/ REJECT Body-Spamschutzregel 31
+/Was ist besser als eine fette Ladung Sahne/ REJECT Body-Spamschutzregel 32
+/www.surerxmed.com/ REJECT Body-Spamschutzregel 33
+/www.surerxpills.com/ REJECT Body-Spamschutzregel 34
+/www.stifyems.com/ REJECT Body-Spamschutzregel 35
+/www.diatrus.com/ REJECT Body-Spamschutzregel 36
+/CITYNETT-NEWSLETTER/i REJECT Body-Spamschutzregel 37
+/Note: *Use *password/ REJECT Body-Spamschutzregel 38
+/ will be disabled because of improper using/ REJECT Body-Spamschutzregel 39
+/i.*don.*like.*the*.plaintext/ REJECT Body-Spamschutzregel 40
+/archive *password/ REJECT Body-Spamschutzregel 41
+# /The *Attac..* *team/ REJECT Body-Spamschutzregel 42
+/The *Attac.org *team/ REJECT Body-Spamschutzregel 43
+/The *Attac.de *team/ REJECT Body-Spamschutzregel 44
+/The *Attac-netzwerk.de *team/ REJECT Body-Spamschutzregel 45
+/The *Jpberlin.de *team/ REJECT Body-Spamschutzregel 46
+/Our main mailing server/ REJECT Body-Spamschutzregel 47
+/please update your profile at Billing Center/ REJECT Body-Spamschutzregel 48
+/WSEAS will reply to you/ REJECT Body-Spamschutzregel 49
+/de.componentsengine.net/ REJECT Body-Spamschutzregel 50
+/List von Components Engine eingetragen/ REJECT Body-Spamschutzregel 51
+/The Weekend Pill - Xialis is safer, quicker, lasts longers/ REJECT Body-Spamschutzregel
+/Muzenda der �teste Sohn von Paul Muzenda bin , einem Farmer in Simba/ REJECT Body-Spamschutzregel 53
+/Alles fr die Autorennbahn/ REJECT Body-Spamschutzregel 54
+/Der Wurm nennt sich selbst "ODIN" und konnte sich bist jetzt/ REJECT Body-Spamschutzregel 55
+/NICHT ABHEBEN, SONDERN SOFORT ABWEISEN/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 56
+/Es ist ein Virus, welcher alle IMEI und IMSI Daten/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 57
+/Der Meister unter den Druckprogrammen: PRINTMASTER 8 GOLD/ REJECT Body-Spamschutzregel 58
+/Stellen Sie sich vor, Sie kaufen ein Produkt oder eine Dienstleistung im/ REJECT Body-Spamschutzregel 59
+/So finden Sie blitzschnell den NAMEN und ADRESS-EINTRAG zu jeder/ REJECT Body-Spamschutzregel 60
+/^TVqQAAMAAAAEAAAA\/\/8AALgAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA$/ REJECT Body-Spamschutzregel Due to recent virus attacks, we temporarily block all Win32 executable files. Please re-send your attachment in a compressed (tar, zip, rar, etc.) form. Your message has NOT been delivered. 61
+/eptember 2003, Cumulative Patch/ REJECT Body-Spamschutzregel 62
+/Ich bin gerade vor einem neuen.*sehr gef�rlichen V.rus gewarnt/ REJECT Body-Spamschutzregel 63
+/^RSLxwtYBDB6FCv8ybBcS0zp9VU5of3K4BXuwyehTM0RI9IrSjVuwP94xfn0wgOjouKWzGXHVk3qg$/ REJECT Body-Spamschutzregel This is a Sobig-Worm! 64
+/exklusives virtuelles Gratis-Rubbellos welches Sie gleich jetzt live mit/ REJECT Body-Spamschutzregel 65
+/Willkommen beim Lucky7Casino/ REJECT Body-Spamschutzregel 66
+/heutzutage spielen Kontakte und Adressdaten eine immer wichtigere Rolle./ REJECT Body-Spamschutzregel 67
+/REVERZ anhand des Datenbestands der D-Info den gesuchten/ REJECT Body-Spamschutzregel 68
+/www.privatseitennetz.com/ REJECT Body-Spamschutzregel 69
+/Outlook and Outlook Express as well as five newly/ REJECT Body-Spamschutzregel 70
+/delog@cip.informatik.uni-wuerzburg.de/ REJECT Body-Spamschutzregel 71
+/credit.hostfree2003.com/ REJECT Body-Spamschutzregel 72
+/www.mediabiz.de.ewmail/ REJECT Body-Spamschutzregel 73
+/Want to boost your sales with Internet/ REJECT Body-Spamschutzregel 74
+/talente.tripod.com.br/ REJECT Body-Spamschutzregel 75
+/schlechte Schufa-Auskunft? Bonit�sprobleme? Dann w�len Sie doch/ REJECT Body-Spamschutzregel 76
+/Diese Liste von Banken, Sparkassen Volks- und Raiffeisenbanken OHNE Schufa-Anschluss finden Sie nicht/ REJECT Body-Spamschutzregel 77
+/Gute Nachrichten. Gerade habe ich die geile \"FickShow\" gefunden:/ REJECT Body-Spamschutzregel 78
+/Gute Nachrichten. Gerade habe ich die geile "FickShow" gefunden:/ REJECT Body-Spamschutzregel 79
+/Create Professional 3D Page-Tuning/ REJECT Body-Spamschutzregel 80
+/SEXKONTAKTE ONLINE/ REJECT Body-Spamschutzregel 81
+/FREE Access to.*adult.*sites/i REJECT Body-Spamschutzregel 82
+/web-supermarket.com/i REJECT Body-Spamschutzregel 83
+/Wir haben ihre Adresse durch eines unserer Partnerunternehmen/ REJECT Body-Spamschutzregel 84
+/Wir haben ihre Adresse.*Partnerunternehmen/i REJECT 85
+/herbal-place.com/ REJECT Body-Spamschutzregel 86
+/GIO DIET-CAPS greifen hier ein durch:/ REJECT Body-Spamschutzregel 87
+/These are Free Cash Grants That you NEVER have to repay/ REJECT Body-Spamschutzregel 88
+/Wir haben unseren Zugang neu upgedadet/ REJECT Body-Spamschutzregel 89
+/Jemand der Dich sehr gut kennt wuerde gern ein Treffen mit Dir/i REJECT Body-Spamschutzregel 90
+/Wenn Du wissen willst wer Dich treffen moechte/i REJECT Body-Spamschutzregel 91
+/You Have Won a FREEE/i REJECT Body-Spamschutzregel 93
+/Click Here For All Your Favorite Pornstars/i REJECT Body-Spamschutzregel 94
+/Year the U.S. Government Gives away BILLIONS in cash grants/i REJECT Body-Spamschutzregel 95
+/Banken ohne Schufa-Auskunft/i REJECT Body-Spamschutzregel 96
+/Probleme mit der Schufa/i REJECT Body-Spamschutzregel 97
+/Laden Sie sich jetzt unsere kostenlose Zugangssoftware runter/ REJECT Body-Spamschutzregel 98
+/Genocide Is A Black-And-White Concept/ REJECT Body-Spamschutzregel 99
+/So viele Wuensche auf einmal/ REJECT Body-Spamschutzregel 100
+/diese Mail ist kein SPAM/i REJECT Body-Spamschutzregel 101
+/Sch.*ne Gr.*e von Lucky Casino/ REJECT Body-Spamschutzregel 102
+/Weil Sie oder ein anderer bei Lucky Casino/i REJECT Body-Spamschutzregel 103
+/Endlich habe ich Deine E-Mail Adresse wieder gefunden, das hat aber/i REJECT Body-Spamschutzregel 104
+/galerie kurt im hirsch/ REJECT Body-Spamschutzregel
+/X-MS_Scanner: Kein Virus erkannt/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+/Anti_Virus Service/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+
+#
+# Checks gesammelt aus dem Netz von
+# http://www.hispalinux.es/~data/postfix/
+#
+/.*www\.removeyou\.com.*/ REJECT Body-Spamschutzregel 110
+/.*waterforge\.com.*/ REJECT Body-Spamschutzregel 111
+/.*capitalwave\.com\?subject=Please*/ REJECT Body-Spamschutzregel 112
+/\.virtmundo\.com/ REJECT Body-Spamschutzregel 113
+#/Accept Credit Cards/ REJECT Body-Spamschutzregel 114
+/Nude Celebrities/ REJECT Body-Spamschutzregel 115
+/PRODUCT or SERVICE/i REJECT Body-Spamschutzregel 116
+# /GUARANTEED!/ REJECT Body-Spamschutzregel 117
+/Amateur Girls/ REJECT Body-Spamschutzregel 118
+#/FREE MEMBERSHIP/ REJECT Body-Spamschutzregel 119
+#/bizinfo/ REJECT Body-Spamschutzregel 120
+# block iframe hack 122
+/<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>/ REJECT Body-Spamschutzregel 123
+# some porn spam phrases 125
+/^Big tit lovers unite\.$|\bcum.?(shoo?ts|slurp)|swallow(ing)? cum\b|\bcum\b.*swallow(ing)?|\b(ass|arse).?fucking|(tight|wet|shaved|young|teen)+ pussy|fuck.?fest|pussy.?juice|\bcum all over|compulsive masturbators agree|explicit hardcore|(nasty|teen).*\bsluts?|You received this mail because our records show that you have asked to receive|(TEEN|ANAL) FUCK SITE|delete this mail( now)? if (you|u) do not want porn|HARDCORE PORN|HORNY FARMGIRLS/ REJECT Body-Spamschutzregel 126
+# some nigerian scam phrases 128
+/^Dear.*(Fellow.*Entrepreneur|Achiever|adult.*webmaster|Internet.*user|Future.*Millionaire)/ REJECT Body-Spamschutzregel 129
+# Wg. Postfiy-Problem auskommentiert?! 130
+#/(Dan Dakova|(TO|Attn *)[;:]? *(The )?President *\/ *C\.?E\.?O\.?|STRICTLY CONFIDENTIAL BUSINESS PROPOSAL|MR(?:\.|=2e)? PATRICE MILLER|President of Crane International Trading Corp(?:\.|=2e)|44-775-281-5820|44-7799289001|44-7092374892|44-7092343325|JOSEPH NWOSU|HARRY KONGOLO|JAMES GIWA|(Umaru|Aminatou) Hamidu|PERSONAL AND STRICTLY CONFIDENTIAL|It is with my profound dignity that I write you this very important|REQUEST FOR URGENT BUSINESS|Marshall Kabba|WITH DUE RESPECT AND HUMIILITY I WRITE YOU|I GOT YOUR CONTACT THROUGH INTERNATIONAL BUSINESS|Your contact address got to me through the Internet|MOHAMMED(?:\.|=2e)?\s?ABACHA|will forward to you a duly signed POWER OF ATTORNEY|Edith M(?:\.|=2e)? Koromah|I must solicit your strictest confidence in this transaction|MRS(?:\.|=2e)? ?M.? ?SESE-SEKO|WIDOW OF LATE PRESIDENT MOBUTU|ATTN:\s*MANAGING DIRECTOR|PERMIT ME TO INFORM YOU OF MY DESIRE OF GOING INTO|MR MOMADOU LEY|I AM BARRISTER ABDULKARIMI A(?:\.|=2e)? BRUME|^\s*ATTN\s*;\s*$|BRAM KHUMALO|(Sandra|Jonas) Savimbi|Million\b.{0,40}\b(?:United States? Dollars?|USD)|BASED ON INFORMATION GATHERED ABOUT YOU|POSITION TO HELP US IN TRANSFER|Government of Nigeria|NIGERIAN? NATIONAL|Nigerian? Government|Bank of Nigeria|Mpeti Kabila|President LAURENT DESIRE KABILA|CLEMENT OSHODI|URGENT & CONFIDENTIAL BUSINESS PROPOSAL|DEPARMENT OF PETROLEUM RESOURCES|Federal Ministry of works and Housing in Nigeria|Director of Contracts and Finance Allocation|CHIENCHEN YU|Dangote Ahmed|CHRIS KAASA|I WAIT YOUR URGENT RESPONSE|PRESIDENT DAWUDU JAWARA|JAMES ADELEKE|I am soliciting your involvement in a business|MIRIAM ABACHA|wife of the (?:late )?Nigeria|Kamuzu Thandiwe)/ REJECT Body-Spamschutzregel 131
+# misc spam phrases 133
+/(Kathmandu Temple Kiff|Do You Have The Yen To Be a A Millionaire\?|This message is brought to you by BerryTrim Affiliate|A \$5,000 Investment in the Euro vs the dollar, "?properly positioned"?|Reply( back)? with "?remove"? in( the)? subject line|To be removed (send e?-?mail|from further mailings)|If you have the staff to field the leads I can generate|Do you need more Traffic to your website\?|herbal viagra)/ REJECT Body-Spamschutzregel 134
+# Covers off most of the double extension virus attachments- more you have 140
+# in one line the more efficient it is 141
+/^Content-Disposition: attachment;filename=".*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)"$/ REJECT Body-Spamschutzregel 142
+/^Content-Disposition: attachment;filename=.*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)$/ REJECT Body-Spamschutzregel 143
+/(filename|name)="(WTC|wtc|README)\.EXE"/ REJECT Body-Spamschutzregel 145
+/(filename|name)="(Happy99|Navidad|prettypark|pretty park|zipped_files|flcss|Msinit|wininit|msi216|readme|README|Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 146
+/(filename|name)="(dhcp*|Emanuel|kmbfejkm|NakedWife|Seicho_no_ie|JAMGCJJA|Sulfnbk)\.exe"/ REJECT Body-Spamschutzregel 147
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 148
+/to be removed[,]* please click.*link/ REJECT Body-Spamschutzregel 151
+# /to be removed[,]* from (the|my|our) (mailing|email|e-mail)*[ ]*list/ REJECT Body-Spamschutzregel 152
+/to be removed[,]* from.*(mailings|offers)/ REJECT Body-Spamschutzregel 153
+/to be removed[,]* from the list send a blank email/ REJECT Body-Spamschutzregel 154
+/to be removed[,]* [e]*[-]*mail.*with/ REJECT Body-Spamschutzregel 155
+/to remove[,]* please send a blank email/ REJECT Body-Spamschutzregel 156
+#/remove yourself from this list/ REJECT Body-Spamschutzregel 157
+/removed from our mail agents/ REJECT Body-Spamschutzregel 158
+/to remove yourself immediately/ REJECT Body-Spamschutzregel 159
+/to remove yourself from future/ REJECT Body-Spamschutzregel 160
+/Rem[o]*ve me fro[nm] any (furhter|further) mailings/ REJECT Body-Spamschutzregel 161
+/remove yourself from any future mailings/ REJECT Body-Spamschutzregel 162
+/to no longer receive this message reply/ REJECT Body-Spamschutzregel 163
+/to no longer receive messages click the link/ REJECT Body-Spamschutzregel 164
+/to no longer receive messages please click the link/ REJECT Body-Spamschutzregel 165
+/our broadcast email software/ REJECT Body-Spamschutzregel 166
+/there are no federal regulations or laws on (email|e-mail) advertising/ REJECT Body-Spamschutzregel 167
+/to receive (no|any) (further|future) (offers|mailings)/ REJECT Body-Spamschutzregel 168
+/do not wish to receive future (e-mail|email)/ REJECT Body-Spamschutzregel 169
+# /do not wish to receive (e-mail|email)/ REJECT Body-Spamschutzregel 170
+/unsubscribe from Virtumundo Rewards/ REJECT Body-Spamschutzregel 171
+/if you do not wish to receive email from me/ REJECT Body-Spamschutzregel 172
+/reply with the word remove in the subject line/ REJECT Body-Spamschutzregel 173
+/reply address on this email was active at the time this email was sent/ REJECT Body-Spamschutzregel 174
+/not a registered investment advisor/ REJECT Body-Spamschutzregel 175
+/sent by corporate micro mail manager/ REJECT Body-Spamschutzregel 176
+/to be stop future mailings/ REJECT Body-Spamschutzregel 177
+/to stop future mailings/ REJECT Body-Spamschutzregel 178
+/to be taken off the mailing list please click below/ REJECT Body-Spamschutzregel 179
+/sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 180
+/sent in compliance (with|of)/ REJECT Body-Spamschutzregel 181
+/compliance with the current federal legislation/ REJECT Body-Spamschutzregel 182
+/comply with proposed federal legislation/ REJECT Body-Spamschutzregel 183
+/permanently (deleted|removed) from our (database|list)/ REJECT Body-Spamschutzregel 184
+/to be removed your email from our mailing list/ REJECT Body-Spamschutzregel 185
+/this mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 186
+/this[ ]*message[ ]*is[ ]*being[ ]*sent[ ]*in[ ]*full[ ]*compliance/ REJECT Body-Spamschutzregel 187
+/this is a one[-\ ]*time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 188
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 189
+/cannot be considered spam/ REJECT Body-Spamschutzregel 190
+/cannot be considered as spam/ REJECT Body-Spamschutzregel 191
+/(respect|honor|honour) all removal requests/ REJECT Body-Spamschutzregel 192
+/no longer wish to receive these offers/ REJECT Body-Spamschutzregel 193
+/you will not receive this offer again/ REJECT Body-Spamschutzregel 194
+/this is not an unsolicited mail/ REJECT Body-Spamschutzregel 195
+/this email has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 196
+/has not been sent unsolicited/ REJECT Body-Spamschutzregel 197
+#/(wish|would) to be removed from (our|the)/ REJECT Body-Spamschutzregel 199
+/all removes (honored|honoured)/ REJECT Body-Spamschutzregel 200
+/To[ ]+remove[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 201
+/to[ ]+be[ ]+removed[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 202
+/removemenow@excite.com/ REJECT Body-Spamschutzregel 204
+/1800cruisesandtours\.com/ REJECT Body-Spamschutzregel 205
+/freewebdirect\.net/ REJECT Body-Spamschutzregel 206
+/new-herbalway\.com/ REJECT Body-Spamschutzregel 207
+/advantagesweb\.com/ REJECT Body-Spamschutzregel 208
+/phytohealing\.com/ REJECT Body-Spamschutzregel 209
+/tradersprophet\.com/ REJECT Body-Spamschutzregel 210
+/ugot2see\.com/ REJECT Body-Spamschutzregel 211
+/hotlatinparadise\.com/ REJECT Body-Spamschutzregel 212
+/pearlgolf\.com/ REJECT Body-Spamschutzregel 213
+/halloweenomania\.com/ REJECT Body-Spamschutzregel 214
+/gofortuneonline\.com/ REJECT Body-Spamschutzregel 215
+/scantexas\.com/ REJECT Body-Spamschutzregel 216
+/buildreferrals\.com/ REJECT Body-Spamschutzregel 217
+/removeyou\.com/ REJECT Body-Spamschutzregel 218
+/cashbackmall\.com/ REJECT Body-Spamschutzregel 219
+/pageitnow\.net/ REJECT Body-Spamschutzregel 220
+/easycream\.com/ REJECT Body-Spamschutzregel 221
+/optinrealbig\.com/ REJECT Body-Spamschutzregel 222
+/realgreatgifts\.com/ REJECT Body-Spamschutzregel 223
+/realcheapgifts\.com/ REJECT Body-Spamschutzregel 224
+/pillsofpleasure\.com/ REJECT Body-Spamschutzregel 225
+/greathealthpills\.com/ REJECT Body-Spamschutzregel 226
+/saverealbigdeals\.com/ REJECT Body-Spamschutzregel 227
+/saverealbigstore\.com/ REJECT Body-Spamschutzregel 228
+/realbigwinners\.com/ REJECT Body-Spamschutzregel 229
+/saverealbig\.com/ REJECT Body-Spamschutzregel 230
+/extremetraffic_rem@excite\.com/ REJECT Body-Spamschutzregel 232
+/tccoptin@yahoo\.com/ REJECT Body-Spamschutzregel 233
+/tccoptout@yahoo.com/ REJECT Body-Spamschutzregel 234
+/stop026@excite\.com/ REJECT Body-Spamschutzregel 235
+/pleasestopsending@hotmail.com/ REJECT Body-Spamschutzregel 236
+/viperdrawing@winning.com/ REJECT Body-Spamschutzregel 237
+/mailto:.*\@.*\?subject\=(3D)*(remove|removeme|pleasedelete|pleaseremove|deleteme)+/ REJECT Body-Spamschutzregel 238
+/StudioPros/ REJECT Body-Spamschutzregel 240
+/universal advertising systems/ REJECT Body-Spamschutzregel 241
+/androstenone pheromone concentrate/ REJECT Body-Spamschutzregel 242
+/message was sent by a[n]* independent advertising company/ REJECT Body-Spamschutzregel 243
+/amazing cash products/ REJECT Body-Spamschutzregel 244
+/penis.*growth/ REJECT Body-Spamschutzregel 245
+/vortex[ ]+supplies/ REJECT Body-Spamschutzregel 246
+/international trade sources llc/ REJECT Body-Spamschutzregel 247
+/postmasterdirect inc/ REJECT Body-Spamschutzregel 248
+/free no obligation consultation/ REJECT Body-Spamschutzregel 249
+/voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 250
+/get back.*years of your income taxes/ REJECT Body-Spamschutzregel 251
+/click here for your free quote/ REJECT Body-Spamschutzregel 252
+/click here to be (permanently)* ?(removed|deleted)/ REJECT Body-Spamschutzregel 253
+/to unsubscribe do nothing/ REJECT Body-Spamschutzregel 254
+/OTCBB Stock Alert/ REJECT Body-Spamschutzregel 255
+/apparently you have filled out an online form/ REJECT Body-Spamschutzregel 257
+/list management software will not know/ REJECT Body-Spamschutzregel 258
+/message will only be sent once/ REJECT Body-Spamschutzregel 259
+/found this company on the internet/ REJECT Body-Spamschutzregel 260
+/you will not receive any future mailings/ REJECT Body-Spamschutzregel 261
+/all removal requests are (honored|honoured)/ REJECT Body-Spamschutzregel 262
+/you will be removed from our mailing[ ]*list and receive no further information from us/ REJECT Body-Spamschutzregel 263
+/we include contact information and a method to be removed from our mailing[ ]*list/ REJECT Body-Spamschutzregel 264
+/there is no need to unsubscribe/ REJECT Body-Spamschutzregel 265
+/I have made every attempt to target this message/ REJECT Body-Spamschutzregel 266
+/If you do not wish to be on our list then click here/ REJECT Body-Spamschutzregel 267
+/If you are not interested in receiving information/ REJECT Body-Spamschutzregel 268
+/your request will be (honored|honoured) with prompt removal/ REJECT Body-Spamschutzregel 269
+/if you feel you got this e[-]*mail by mistake/ REJECT Body-Spamschutzregel 270
+/to have us permanently remove you from our list/ REJECT Body-Spamschutzregel 271
+/we guarantee you will not receive any future e[-]*mails from us/ REJECT Body-Spamschutzregel 272
+/if you would rather not receive future e[-]*mails/ REJECT Body-Spamschutzregel 273
+/we do not intend to send any future e[-]*mails/ REJECT Body-Spamschutzregel 274
+/further emailing to you by the of this email may be stopped/ REJECT Body-Spamschutzregel 275
+/by the of this email may be stopped/ REJECT Body-Spamschutzregel 276
+/receiving this e[-]*mail because you opted[-\ ]in/ REJECT Body-Spamschutzregel 277
+/this email has been sent to you because someone at this e[-]*mail address/ REJECT Body-Spamschutzregel 278
+/to have your name removed from our email database/ REJECT Body-Spamschutzregel 279
+/stopped at no cost to you by sending a reply to this e[-]*mail address/ REJECT Body-Spamschutzregel 280
+/this message is an advertisement/ REJECT Body-Spamschutzregel 281
+/immediately removed from receiving any more information/ REJECT Body-Spamschutzregel 282
+/would not like to receive future messages/ REJECT Body-Spamschutzregel 283
+/tell us you would not like to continue to receive such e[-]*mails/ REJECT Body-Spamschutzregel 284
+/advertise your product or service using bulk email services/ REJECT Body-Spamschutzregel 285
+/You have been specially selected to qualify/ REJECT Body-Spamschutzregel 286
+/while working from the privacy of your own home/ REJECT Body-Spamschutzregel 287
+/e[-]*mail messages may be stopped/ REJECT Body-Spamschutzregel 288
+/list removal\/opt[-\ ]*out/ REJECT Body-Spamschutzregel 289
+/this is a no obligation qualification form/ REJECT Body-Spamschutzregel 290
+/please notify the sender immediately with .*remove/ REJECT Body-Spamschutzregel 291
+/home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 292
+/(filename|name)="(Happy99|Navidad|prettypark)\.exe"/ REJECT Body-Spamschutzregel 294
+/(filename|name)="(pretty park|zipped_files|flcss)\.exe"/ REJECT Body-Spamschutzregel 295
+/(filename|name)="(Msinit|wininit|msi216|CFGWIZ31)\.exe"/ REJECT Body-Spamschutzregel 296
+/(filename|name)="(Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 297
+/(filename|name)="(Emanuel|kmbfejkm|NakedWife|Readme|readme)\.exe"/ REJECT Body-Spamschutzregel 298
+/(filename|name)="(Seicho_no_ie|JAMGCJJA|Sulfnbk|QuickLnk)\.exe"/ REJECT Body-Spamschutzregel 299
+/(filename|name)="(Readme|readme)\.eml"/ REJECT Body-Spamschutzregel 300
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 302
+/Rem I am sorry/ REJECT Body-Spamschutzregel 303
+/Te mando este archivo para que me des tu punto de vista/ REJECT Body-Spamschutzregel 304
+/I send you this file in order to have your advice/ REJECT Body-Spamschutzregel 305
+/Espero me puedas ayudar con el archivo que te mando/ REJECT Body-Spamschutzregel 306
+/Espero te guste este archivo que te mando/ REJECT Body-Spamschutzregel 307
+/Este es el archivo con la informaci� que me pediste/ REJECT Body-Spamschutzregel 308
+/I hope you can help me with this file that I send/ REJECT Body-Spamschutzregel 309
+/I hope you like the file that I send you/ REJECT Body-Spamschutzregel 310
+/This is the file with the information that you ask for/ REJECT Body-Spamschutzregel 311
+/0 Business Fax Numbers/ REJECT Body-Spamschutzregel 314
+/1[-\ ]Time Mailling/ REJECT Body-Spamschutzregel 315
+/30 day money back guarantee/ REJECT Body-Spamschutzregel 316
+/A New Loan Makes Sense/ REJECT Body-Spamschutzregel 317
+/Advertise your product or service/ REJECT Body-Spamschutzregel 318
+/Aging While Burning Fat/ REJECT Body-Spamschutzregel 319
+/Amazing cash products/ REJECT Body-Spamschutzregel 320
+/Androstenone/ REJECT Body-Spamschutzregel 321
+/Attract Members of The Opposite/ REJECT Body-Spamschutzregel 322
+/Automatic Stock Picking Software/ REJECT Body-Spamschutzregel 323
+/Bad Credit Is History/ REJECT Body-Spamschutzregel 324
+/Banner Advertising Price/ REJECT Body-Spamschutzregel 325
+/Barnyard Fucking/ REJECT Body-Spamschutzregel 326
+/BEAUTIFUL Women On The Web/ REJECT Body-Spamschutzregel 327
+/Because Our Records Indicate That You Are A/ REJECT Body-Spamschutzregel 328
+# /Because You Agree/ REJECT Body-Spamschutzregel 329
+/Because You Have Subscribed To One Of Our/ REJECT Body-Spamschutzregel 330
+#/Because You Registered/ REJECT Body-Spamschutzregel 331
+/Because You Signed Up At One/ REJECT Body-Spamschutzregel 332
+/Best Porn/ REJECT Body-Spamschutzregel 333
+/Buy Preforeclosure Houses/ REJECT Body-Spamschutzregel 334
+/Cable TV Descrambler/ REJECT Body-Spamschutzregel 335
+/Cannot be Considered Spam/ REJECT Body-Spamschutzregel 336
+/Cannot be Considered As Spam/ REJECT Body-Spamschutzregel 337
+/Caso nao desejar receber este tipo de email novamente/ REJECT Body-Spamschutzregel 338
+/Click Here For Your Free Quote/ REJECT Body-Spamschutzregel 339
+/Click Here To Avoid This In The Future/ REJECT Body-Spamschutzregel 340
+/Compliance with the current federal legislation/ REJECT Body-Spamschutzregel 341
+/Copy DVD Movies/ REJECT Body-Spamschutzregel 343
+/Creating Immediate Wealth/ REJECT Body-Spamschutzregel 344
+/Cum Shots/ REJECT Body-Spamschutzregel 345
+/Dear Future/ REJECT Body-Spamschutzregel 348
+#/Dear Entrepreneur/ REJECT Body-Spamschutzregel 349
+/Debt Consolidation/ REJECT Body-Spamschutzregel 350
+/Do You Want Financial/ REJECT Body-Spamschutzregel 351
+/Don't Need A Prescription/ REJECT Body-Spamschutzregel 352
+/E[-\ ]Mail Bill Section 301/ REJECT Body-Spamschutzregel 353
+/Earn A Full Time Income/ REJECT Body-Spamschutzregel 354
+/Easily Lose Weight/ REJECT Body-Spamschutzregel 355
+/Equalamail/ REJECT Body-Spamschutzregel 356
+/Email Bill Section 301/ REJECT Body-Spamschutzregel 357
+/Erotic Travel Guide/ REJECT Body-Spamschutzregel 358
+/Fat Blocker/ REJECT Body-Spamschutzregel 359
+/Fellow Internet entrepeneur/ REJECT Body-Spamschutzregel 360
+/Figure Income Earners/ REJECT Body-Spamschutzregel 361
+/Find Out Anything About Anyone/ REJECT Body-Spamschutzregel 362
+/Fix Your Credit/ REJECT Body-Spamschutzregel 363
+/Found this company on the internet/ REJECT Body-Spamschutzregel 364
+/Free Bulk Email/ REJECT Body-Spamschutzregel 365
+/Free Direct Email/ REJECT Body-Spamschutzregel 367
+/Free Multiple Moving Cost/ REJECT Body-Spamschutzregel 368
+/Free no obligation/ REJECT Body-Spamschutzregel 369
+/Free Private Webcam/ REJECT Body-Spamschutzregel 370
+/Free S e x/ REJECT Body-Spamschutzregel 371
+/Free Sex/ REJECT Body-Spamschutzregel 372
+/Free Vacation Giveaway/ REJECT Body-Spamschutzregel 373
+/Free XXX/ REJECT Body-Spamschutzregel 374
+/From A Concerned Gas User/ REJECT Body-Spamschutzregel 375
+/Get back.*years of your income taxes/ REJECT Body-Spamschutzregel 376
+/Government Grants E-Book/ REJECT Body-Spamschutzregel 377
+/GROWTH HORMONE RELEASER/ REJECT Body-Spamschutzregel 378
+/Hardcore Animal Action/ REJECT Body-Spamschutzregel 379
+/Hardcore Barnyard/ REJECT Body-Spamschutzregel 380
+/Hardcore Fist/ REJECT Body-Spamschutzregel 381
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 382
+/Home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 383
+/Has not been sent unsolicited/ REJECT Body-Spamschutzregel 384
+/I Will Personally Show You How/ REJECT Body-Spamschutzregel 385
+/Independent advertising company/ REJECT Body-Spamschutzregel 386
+/Incredible Life Changing/ REJECT Body-Spamschutzregel 387
+/It Has Been Going Since/ REJECT Body-Spamschutzregel 388
+/Hardcore Animal/ REJECT Body-Spamschutzregel 389
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 390
+/Hardcore Teens/ REJECT Body-Spamschutzregel 391
+/Hardcore Unsuspecting/ REJECT Body-Spamschutzregel 392
+/Has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 393
+/Hear About Future Offers From Us/ REJECT Body-Spamschutzregel 394
+/Hear About Offers From Us/ REJECT Body-Spamschutzregel 395
+/Hot Horny Girls/ REJECT Body-Spamschutzregel 396
+/Hot Young Nasty/ REJECT Body-Spamschutzregel 397
+/Huge Wild Animals/ REJECT Body-Spamschutzregel 398
+/Improve Sexual Vigor/ REJECT Body-Spamschutzregel 399
+#/If you no longer wish to receive/ REJECT Body-Spamschutzregel 400
+/If you prefer not to receive future emails/ REJECT Body-Spamschutzregel 401
+/I'm a total exibitionist/ REJECT Body-Spamschutzregel 402
+/Im a total exibitionist/ REJECT Body-Spamschutzregel 403
+/In Compliance With The New E[-\ ]Mail Bill/ REJECT Body-Spamschutzregel 404
+#/Interest rates are rising/ REJECT Body-Spamschutzregel 405
+/Just ONE click away from showing you/ REJECT Body-Spamschutzregel 406
+/Lender referral service/ REJECT Body-Spamschutzregel 407
+/Lenders Compete For Your Business/ REJECT Body-Spamschutzregel 408
+/Life Changing Opportunity/ REJECT Body-Spamschutzregel 409
+/Lips Around Your/ REJECT Body-Spamschutzregel 410
+/Locate Hidden Assets/ REJECT Body-Spamschutzregel 411
+/Lose Pounds And Inches/ REJECT Body-Spamschutzregel 412
+/Lose Some Weight Before/ REJECT Body-Spamschutzregel 413
+/Low[-\ ]Cost Viagra/ REJECT Body-Spamschutzregel 414
+/Lowest Mortgage/ REJECT Body-Spamschutzregel 415
+/Make money online/ REJECT Body-Spamschutzregel 416
+# /Marketing Method/ REJECT Body-Spamschutzregel 417
+/Million E[-\ ]mail Addresses/ REJECT Body-Spamschutzregel 418
+/Million Email Addresses/ REJECT Body-Spamschutzregel 419
+/Minutes To Complete Your Order/ REJECT Body-Spamschutzregel 420
+/Much More Effective For Both Partners/ REJECT Body-Spamschutzregel 421
+/Mortgage Quote/ REJECT Body-Spamschutzregel 422
+/Need Fod Adult Entertainment/ REJECT Body-Spamschutzregel 423
+/Never Sends Unsolicited Email/ REJECT Body-Spamschutzregel 424
+/No[-\ ]Spam Policy/ REJECT Body-Spamschutzregel 425
+/On my personal live Webcam/ REJECT Body-Spamschutzregel 427
+/One[-\ ]Time Mail/ REJECT Body-Spamschutzregel 428
+/One[-\ ]Time Non[-\ ]Commercial/ REJECT Body-Spamschutzregel 429
+/Opt-In To Our/ REJECT Body-Spamschutzregel 430
+/Opt-Out From Our/ REJECT Body-Spamschutzregel 431
+/Our Herbal Supplement/ REJECT Body-Spamschutzregel 432
+/Owning your first home/ REJECT Body-Spamschutzregel 433
+/Partner E[-\ ]mail Offers/ REJECT Body-Spamschutzregel 434
+/Partner Email Offers/ REJECT Body-Spamschutzregel 435
+/Penis.*growth/ REJECT Body-Spamschutzregel 436
+/Permanently (deleted|removed) From Our/ REJECT Body-Spamschutzregel 437
+/Permission Based E[-\ ]mail/ REJECT Body-Spamschutzregel 438
+/Permission Based Email/ REJECT Body-Spamschutzregel 439
+/Pheromone Concentrate/ REJECT Body-Spamschutzregel 440
+/Potent Pheromone/ REJECT Body-Spamschutzregel 441
+/Price Discount for New TLD Extensions/ REJECT Body-Spamschutzregel 442
+/Quality Amateur Action/ REJECT Body-Spamschutzregel 443
+/Ready to refinance/ REJECT Body-Spamschutzregel 444
+/Real Live Cameras And Movies/ REJECT Body-Spamschutzregel 445
+/Real LiveCameras And Movies/ REJECT Body-Spamschutzregel 446
+/Receive Special Offer/ REJECT Body-Spamschutzregel 447
+/Reduce Body Fat/ REJECT Body-Spamschutzregel 448
+/Refinance Your Home/ REJECT Body-Spamschutzregel 449
+/Second Mortgage/ REJECT Body-Spamschutzregel 450
+/Secure A Better Life For/ REJECT Body-Spamschutzregel 451
+/See How Much You Can Save/ REJECT Body-Spamschutzregel 452
+/Sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 453
+/Sent To You By A Marketing Partner/ REJECT Body-Spamschutzregel 454
+/Sent in compliance (with|of)/ REJECT Body-Spamschutzregel 455
+/Serious Inquiries Only Please/ REJECT Body-Spamschutzregel 456
+/Shop Hundreds Of Lenders/ REJECT Body-Spamschutzregel 457
+/Start Making $1/ REJECT Body-Spamschutzregel 458
+/Step To Financial Freedom/ REJECT Body-Spamschutzregel 459
+/Steps To Financial Freedom/ REJECT Body-Spamschutzregel 460
+/Suck My Cock/ REJECT Body-Spamschutzregel 461
+/Take A FREE Trip/ REJECT Body-Spamschutzregel 462
+/TAKE YOUR FIRST BIG STEP/ REJECT Body-Spamschutzregel 463
+/Targeted E[-\ ]mail List/ REJECT Body-Spamschutzregel 464
+/Targeted Email List/ REJECT Body-Spamschutzregel 465
+/The following gift or special offer was sent to you/ REJECT Body-Spamschutzregel 466
+/This email is not sent unsolicited/ REJECT Body-Spamschutzregel 467
+/This Is A One[-\ ]*Time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 468
+/This mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 469
+/To Be Removed From This Targeted/ REJECT Body-Spamschutzregel 470
+/To Claim Your Prize Click/ REJECT Body-Spamschutzregel 471
+/To Stop All Future Offers/ REJECT Body-Spamschutzregel 472
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 473
+/Universal Advertising System/ REJECT Body-Spamschutzregel 474
+/Unlimited Phone Conversations/ REJECT Body-Spamschutzregel 475
+/Using Your Identity/ REJECT Body-Spamschutzregel 476
+/Virtumundo/ REJECT Body-Spamschutzregel 477
+/Voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 478
+/We can award any degree/ REJECT Body-Spamschutzregel 479
+/We know it sounds impossible/ REJECT Body-Spamschutzregel 480
+# /Weight Loss [Drug\Medication]/ REJECT Body-Spamschutzregel 481
+/While working from the privacy of your own home/ REJECT Body-Spamschutzregel 482
+/Win Big Money Today/ REJECT Body-Spamschutzregel 483
+/Without Pumps Or Weights Or Stretches/ REJECT Body-Spamschutzregel 484
+/Wouldn't You Like Your Husband Or Boyfriend To Have/ REJECT Body-Spamschutzregel 485
+/You Agree To Receive Email Marketing From/ REJECT Body-Spamschutzregel 486
+/You Are Receiving This Exclusive Promotion/ REJECT Body-Spamschutzregel 487
+/You Are Registered At One Of Our/ REJECT Body-Spamschutzregel 488
+/You are receiving this mail because you have/ REJECT Body-Spamschutzregel 489
+/You Have Agreed To Receive/ REJECT Body-Spamschutzregel 490
+/You Can Search For Anyone/ REJECT Body-Spamschutzregel 491
+/You've Agreed To Receive/ REJECT Body-Spamschutzregel 492
+/You Registered At One Of Our/ REJECT Body-Spamschutzregel 493
+/You've Registered At One Of Our/ REJECT Body-Spamschutzregel 494
+/Your E[-\ ]mail Address Was Obtained/ REJECT Body-Spamschutzregel 495
+/Your Email Address Was Obtained/ REJECT Body-Spamschutzregel 496
+/Your Email Address Was Supplied/ REJECT Body-Spamschutzregel 497
+/Your Mail Address Was Supplied/ REJECT Body-Spamschutzregel 498
+/Your Penis Size/ REJECT Body-Spamschutzregel 499
+/Smart Tags, Smart Investments?/ REJECT Body-Spamschutzregel 500
+/faze the Neptune focal point and strive enterprising/ REJECT Body-Spamschutzregel 501
+/full moon insistence gist an packed/ REJECT Body-Spamschutzregel 502
+/a upward prominently field day health care the ridicule offing or Internet seemingly/ REJECT Body-Spamschutzregel 503
+/fanatic but consistency sluice scrape downtrodden five and ten on needless/ REJECT Body-Spamschutzregel 504
+/fuse box sick sister/ REJECT Body-Spamschutzregel 505
+/immediate fulfillment big deal and cashier/ REJECT Body-Spamschutzregel 506
+/in on parakeet quizzical chicken feed leper on square/ REJECT Body-Spamschutzregel 508
+/reference ounce a achiever sunblock syringe roadside longevity/ REJECT Body-Spamschutzregel 509
+/ocean distrust as antiperspirant coax lubricant entry, the northwestern politicize,/ REJECT Body-Spamschutzregel 510
+/By the time Scarlett had undressed and blown out the candle, her/ REJECT Body-Spamschutzregel 511
+/E-MAIL:czq7q67a@yahoo.co.jp/ REJECT Body-Spamschutzregel 512
--- /dev/null
+# Version 3.69 / 8.6.2011
+#
+# Das Postfix-Buch - Sichere Mailserver mit Linux
+# http://www.postfixbuch.de
+#
+# Heinlein Professional Linux Support GmbH
+# http://www.heinlein-support.de
+#
+# Downloadquelle dieser Datei: http://www.postfixbuch.de/web/service/checks/
+#
+#
+# Verwendung der Filtersammlung auf eigene Gefahr.
+#
+# Es handelt sich dabei um einen tagesaktuellen Auszug der beim
+# ISP "JPBerlin.de" genutzten Filterregeln. Bitte pruefen Sie vor einem
+# Einsatz bei Ihnen ganz genau, ob diese Regeln noch aktuell und sinnvoll
+# sind und ob Sie sie einsetzen moechten!
+#
+#
+# Setzen Sie in /etc/postfix/main.cf einfach
+#
+# body_checks = pcre:/etc/postfix/body_checks oder
+# oder
+# body_checks = regexp:/etc/postfix/body_checks
+#
+# und fuehren Sie "rcpostfix reload" aus.
+#
+# Tipp: pcre ist ein Drittel schneller als regexp!
+#
+#
+
+#
+# Die Nummern hinter dem REJECT tauchen spaeter iM SMTP-Error oder im Log
+# auf, um die Filter-Regel wiederzufinden, die den Block ausgeloest hat.
+# Es kann stattdessen auch einfacher Text benutzt werden.
+#
+
+
+/^Received: from mail pickup service by EXDO01.stricker-marsch.de with Microsoft SMTPSVC.*/ REJECT Mailloopbomb bitte anrufen
+
+#
+#
+# Tagesaktuelle, nur voruebergehende Regelungen:
+# ===============================================
+# [Immer mit Timestamp (!) und ggf. Ticket-Nummer eintragen!]
+#
+
+/alexatrej14913.blogspot.com/ REJECT
+/m-back22.ocn.ad.jp/ REJECT
+/Received: from 83.3.224.146/ REJECT
+/<HTML><HEAD><TITLE>Western Union Alerts./ REJECT
+/http:\/\/www.rocktonchamber.com/ REJECT
+
+#
+#
+# Dauerhaft genutzte Regelungen:
+# ===============================================
+# [Immer mit aufsteiger Nummer sauber eintragen!]
+#
+#
+/http:\/\/free.fr\/support\/verification\/compte\// REJECT Body-Spamschutzregel 1134
+/http:\/\/sonofages.free.fr\/images\/LogoCreditMutuel.png/ REJECT Body-Spamschutzregel 1133
+/ucc.edu.ni/ REJECT Body-Spamschutzregel 1132
+/7figureincome\.php/ REJECT Body-Spamschutzregel 1131
+/Cher Client Verified by Visa/ REJECT Body-Spamschutzregel 1130
+/^From: "Topillen Apotheke" / REJECT Body-Spamschutzregel 1129
+/^Aufgrund mehrerer Phishing Versuche, unsere Visa und Mastercard/ REJECT Body-Spamschutzregel 1128
+/^ Phishing Departament/ REJECT Body-Spamschutzregel 1127
+/We wish to invest between $5Million-$100Million in any viable projects/ REJECT Body-Spamschutzregel 1126
+/God bless you as you get back to me/ REJECT Body-Spamschutzregel 1125
+/www.(b|B)ien(e|E)tremag.com/ REJECT Body-Spamschutzregel 1124
+/Sehr geehrte Sparkasse Card/ REJECT Body-Spamschutzregel 1123
+/zigaretten-discount.info/ REJECT Body-Spamschutzregel 1122
+/zigaretten-discount\[punkt\]info/ REJECT Body-Spamschutzregel 1121
+/Guten Tag Mitglied [0-9]{5}/ REJECT Body-Spamschutzregel 1120
+/elenx.innovacon.com\/.e\/e.php/ REJECT Body-Spamschutzregel 1119
+/www.sniperrs.de\/modules\/Forums\/admin/ REJECT Body-Spamschutzregel 1118
+/boxneufnet.com\/id\/oragne.fr\/Identifiant/ REJECT Body-Spamschutzregel 1117
+/www.colellsa.com\/img\/quienes\/pabo\/paypal-fr/ REJECT Body-Spamschutzregel 1116
+/dekmor.cmu.ac.th\/sticker\/upload\/Logs\/Login\/webscrcmd/ REJECT Body-Spamschutzregel 1115
+/ektoschronou.com/ REJECT Body-Spamschutzregel 1114
+/ulouwaio.com/ REJECT Body-Spamschutzregel 1113
+/logonature.com.nu/ REJECT Body-Spamschutzregel 1112
+/suinlop.com/ REJECT Body-Spamschutzregel 1111
+/soudoorpo.com/ REJECT Body-Spamschutzregel 1110
+/GOOGLE AUSSTATTUNGSFONDS 20.?.? GEWINNER ANMELDEFORMULAR FUER ZAHLUNG/ REJECT Body-Spamschutzregel 1109
+/Anbieter: Privacy GG Limited, 99 Albert Street, Belize City, CA/ REJECT Body-Spamschutzregel 1108
+/^Die Nachricht wurde durch Interads 24 Ltd/ REJECT Body-Spamschutzregel 1107
+/www.sommer-mit-kollegen.de/ REJECT Body-Spamschutzregel 1006
+# Ein Spammer versenden immer Austragungslinks, die auf "/ausa" enden:
+/^www.*\/ausa$/ REJECT Body-Spamschutzregel 1105
+/KlickTel Telefonbuch OEM/ REJECT Body-Spamschutzregel 1104
+/www.klicktel24.org/ REJECT Body-Spamschutzregel 1103
+/Klicken Sie hier, und fühlen Sie sich endlich gut behandelt:/ REJECT Body-Spamschutzregel 1102
+/maryjanemax@yahoo.co.uk/ REJECT Body-Spamschutzregel 1101
+/http.*muqugeh\.cn/ REJECT Body-Spamschutzregel 1100
+/Bei uns bekommen Sie Ihren Kredit schnell, unbürokratisch, diskret und natürlich ohne Bankauskunft./ REJECT Body-Spamschutzregel 1099
+/INTERNATIONAL LOTTERIE PROMOTION SPIELGEMEINSCHAFT/ REJECT Body-Spamschutzregel 1098
+/Leider st=F6ren Sie.=20/ REJECT Body-Spamschutzregel 1097
+/Sie haben dieses Email erhalten, weil Sie im Newsletter von Promohouse Ltd eingetragen sind/ REJECT Body-Spamschutzregel 1096
+/ATTN: Beneficiar/ REJECT Body-Spamschutzregel 1095
+/www.hedonismails.de/ REJECT Body-Spamschutzregel 1094
+/www.globadressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1093
+/elegalal.nextmail.ru/ REJECT Body-Spamschutzregel 1092
+/http:\/\/www.switzerlandpussy.eu/ REJECT Body-Spamschutzregel 1082
+/Die jungen Girls fliegen nur so auf die langen/ REJECT Body-Spamschutzregel 1081
+/\*\*\*\* Commercial use of this software is prohibited \*\*\*\*/ REJECT Body-Spamschutzregel 1080
+/I finded your email in internet and I decide to ask you for help/ REJECT Body-Spamschutzregel 1079
+/Details und moegliche Schritte zur Entsperrung finden Sie/ REJECT Body-Spamschutzregel 1078
+/^Amount Won:/ REJECT Body-Spamschutzregel 1077
+/AWARD WINNING NOTICE/i REJECT Body-Spamschutzregel 1076
+/mixvarejo.com/ REJECT Body-Spamschutzregel 1075
+/www.global-db.(com|net|org)/ REJECT Body-Spamschutzregel 1074
+/^I am Barrister/ REJECT Body-Spamschutzregel 1073
+/respublica@gaucherepublicaine.org/ REJECT Body-Spamschutzregel 1072
+/NEU - Vi Super Active/ REJECT Body-Spamschutzregel 1071
+/anhaltende Versagensangste und wiederholte peinliche Situationen/ REJECT Body-Spamschutzregel 1070
+/Schulfreunde Vermittlungs Service AG/ REJECT Body-Spamschutzregel 1068
+/Multimedia Telegramm/ REJECT Body-Spamschutzregel 1067
+/http.*\.fdub\.biz/ REJECT Body-Spamschutzregel 1066
+/TanjaGuenther/ REJECT Body-Spamschutzregel 1065
+/www.bestnetz24.de\/letter\/ausgabe.php/ REJECT Body-Spamschutzregel 1064
+/www.db.?adressen.(com|net|org|info)/ REJECT Body-Spamschutzregel 1063
+/thomas@jthomas.es/ REJECT Body-Spamschutzregel 1062
+/Ihre Marketing Agentur Espa/ REJECT Body-Spamschutzregel 1061
+/www.pakandu.com/ REJECT Body-Spamschutzregel 1060
+/Glob.?.?.?(C|K)ontact.?.?.?Team/ REJECT Body-Spamschutzregel 1059
+/www.gc.?datenbaken.(com|net|org|info)/ REJECT Body-Spamschutzregel 1058
+/www.glc-?data.(com|net|org|info)/ REJECT Body-Spamschutzregel 1057
+/Global.?(C|K)ontact/i REJECT Body-Spamschutzregel 1056
+/www.imarketing.com.br.remove/ REJECT Body-Spamschutzregel 1055
+/Bestellen Sie jetzt und vergessen Sie Ihre Enttauschungen/ REJECT Body-Spamschutzregel 1054
+/Online Apotheke - original Qualitaet/ REJECT Body-Spamschutzregel 1053
+/Wir wissen was Frauen wollern/ REJECT Body-Spamschutzregel 1052
+/Viiiiaaaaaagra/ REJECT Body-Spamschutzregel 1051
+/Web: www.eurasianpages. com/ REJECT Body-Spamschutzregel 1050
+/^Firma Global Contact bietet Ihnen/ REJECT Body-Spamschutzregel 1049
+/www.g-adressen.net/ REJECT Body-Spamschutzregel 1048
+/NIEMALS geben Sie Ihre Passw.rter an niemanden NUR und melden Sie sich/ REJECT Body-Spamschutzregel 1047 Haspa-Pishing
+/www.loteria.es/ REJECT Body-Spamschutzregel 1046
+/Girls! Deveelop your sexual reelationship and get even MORE pleasurre!/ REJECT Body-Spamschutzregel 1045
+# Nigeria-Spam / phei 20080209
+/Ich bin bei einer routinen Überprüfung in meiner Bank/ REJECT Body-Spamschutzregel 1044
+/Ich vermute das diese E-Mail eine Überraschung für Sie sein wird/ REJECT Body-Spamschutzregel 1043
+/Ich bin bei einer routinen Überprüfung in meiner Bank / REJECT Body-Spamschutzregel 1042
+# Versendet UBE/UCE unter verbraucher@wichtig.ms
+/^Ein Dienst der IT4YOU AG, Friedrichstrasse 171, Berlin - Mitte als/ REJECT Body-Spamschutzregel 1041
+# Versendet KlickTel UBE/UCE: / phei 20080204
+/^www.cdtophit.org/ REJECT Body-Spamschutzregel 1040
+/http:\/\/www\.doenertreff\.de/ REJECT Body-Spamschutzregel 1039
+/Brauchen Sie noch einen Grund um zu Vegas VIP Casino/ REJECT Body-Spamschutzregel 1038
+/glob-contact.net$/ REJECT Body-Spamschutzregel 1037: glob-contact
+/^Ihr Glob-Kontakt-Team$/ REJECT Body-Spamschutzregel 1036: glob-contact
+/www.feilervision.de/ REJECT Body-Spamschutzregel 1035: feilervision
+/DER INVESTORALARM!/i REJECT Body-Spamschutzregel 1034
+/ES IST EIN UNGLAUBLICHES PROFITPOTENTIAL! VERLIERE DIESE CHANCE NICHT!/i REJECT Body-Spamschutzregel 1033
+/LOTTERY AND GAMING INTERNET MESSAGE CENTRE/ REJECT Body-Spamschutzregel 1033
+/I work very hard every day to be able to buy necessities for my mother/ REJECT Body-Spamschutzregel 1032
+/THE FREELOTTO COMPANY/ REJECT Body-Spamschutzregel 1031
+/BreakingMrktNews/ REJECT Body-Spamschutzregel 1030
+/China Media Crop OTC.BB CHMD/ REJECT Body-Spamschutzregel 1029
+/Weltweit gilt das nummerierte TAN-Verfahren als eines der sicherste/ REJECT Body-Spamschutzregel 1028: Postbank-Pishing
+/^Marion Beckera/ REJECT Body-Spamschutzregel 1027
+/Zwecks abschließende Zustimmung für deine Verhandlung zur/ REJECT Body-Spamschutzregel 1026
+/annullieren deine on-line Übertragung® Dienstleistungen./ REJECT Body-Spamschutzregel 1025
+/www.internetloginuser.info/ REJECT Body-Spamschutzregel 1024
+/realsevgi.com/ REJECT Body-Spamschutzregel 1023
+/Um mich zu entlasten, schicke ich Ihnen das (...) Foto wieder zurück./ REJECT Body-Spamschutzregel 1022
+/Oder Ihr Provider hat die Mail falsch weiter geleitet!?/ REJECT Body-Spamschutzregel 1021
+/Versatel-Attachment-Warning.txt/ REJECT Body-Spamschutzregel 1020
+/www=2Eanaforturizm=2Ecom/ REJECT Body-Spamschutzregel 1019
+/www.anaforturizm.com/ REJECT Body-Spamschutzregel 1018
+/The Jpberlin Support Team/ REJECT Body-Spamschutzregel 1017: Pishing-Mails
+/^jpberlin.de support team\./ REJECT Body-Spamschutzregel 1016: Pishing-Mails
+/You have successfully updated the password of your Jpberlin account/ REJECT Body-Spamschutzregel 1015
+/www.ru4mailnow.com/ REJECT Body-Spamschutzregel 1014
+/EXPLOSIVE PICK FOR OUR MEMBERS/ REJECT Body-Spamschutzregel 1013
+/AntiVirus-System: Kein Virus erkannt/ REJECT Body-Spamschutzregel 1012
+/--- FIFA Fussball-Weltmeisterschaft 2006/ REJECT Body-Spamschutzregel 1011
+/ankara@ankararentacar.de/ REJECT Body-Spamschutzregel 1010
+/Replica Watch Models/ REJECT Body-Spamschutzregel 1009
+/Diadem Travel/ REJECT Body-Spamschutzregel 1008
+/Let the search engine experts compete/ REJECT Body-Spamschutzregel 1007
+/Wenn du sonst noch helfen willst, dann verschick diese Nachricht einfach so oft du willst./ REJECT Body-Spamschutzregel 1006
+/http:\/\/www.ehmig.net\/web_mailer/ REJECT Body-Spamschutzregel 1005
+/http:\/\/real.slon.biz/ REJECT Body-Spamschutzregel 1004
+#/im Zusammenhang mit dem Arbeitslosengeld II/ REJECT Body-Spamschutzregel 1003
+/www.inverz.org/ REJECT Body-Spamschutzregel 1002
+/www.inverz.net/ REJECT Body-Spamschutzregel 1001
+
+
+
+
+
+
+/We recommend you to follow the instructions in order to keep your computer safe./ REJECT Body-Spamschutzregel 1
+/Sieh Dir einfach mal ein Video an und mach dann gleich ein Treffen/ REJECT Body-Spamschutzregel 2
+#/money.*back.*guarant/ REJECT Body-Spamschutzregel 3
+/ CIALIS / REJECT Body-Spamschutzregel 4
+/www.galamed.biz/ REJECT Body-Spamschutzregel 5
+/Starts working in less than 15 min./ REJECT Body-Spamschutzregel 6
+/Adipren720/ REJECT Body-Spamschutzregel 7
+/www.lending-home.com/ REJECT Body-Spamschutzregel 8
+/bigbonus-casino.com/ REJECT Body-Spamschutzregel 9
+/Ich hab die ultimative Seite.*dich, klick doch mal an!/ REJECT Body-Spamschutzregel 10
+/www.server42.com/ REJECT Body-Spamschutzregel 11
+/seo-profits.com/ REJECT Body-Spamschutzregel 12
+/Have a great web site, but no one knows it even/ REJECT Body-Spamschutzregel 13
+/REVERZ.*D-INFO/ REJECT Body-Spamschutzregel 14
+/D-INFO.*REVERZ/ REJECT Body-Spamschutzregel 15
+/greatmaleenhancement.biz/ REJECT Body-Spamschutzregel 16
+/ Xanax / REJECT Body-Spamschutzregel 17
+/Vic(o|0)din/ REJECT Body-Spamschutzregel 18
+/Hydr(o|0)c(o|0)d(o|0)ne/ REJECT Body-Spamschutzregel 19
+/ V1agra / REJECT Body-Spamschutzregel 20
+/warehousefull.com/ REJECT Body-Spamschutzregel 21
+/No doctor visit needed/ REJECT Body-Spamschutzregel 22
+/KLICKTEL KENNT SIE!/ REJECT Body-Spamschutzregel 23
+/^www.femo-online.de/ REJECT Body-Spamschutzregel 24
+/www.land-ua.com/ REJECT Body-Spamschutzregel 25
+/Come to Loqozine/ REJECT Body-Spamschutzregel 26
+/^<center><.*a href=.*img src=.*border.*><\/a><\/center>$/ REJECT Body-Spamschutzregel Check 27
+/www.gord.us/ REJECT Body-Spamschutzregel 28
+/www.reverz.org/ REJECT Body-Spamschutzregel 29
+/wonderfulaction.com/ REJECT Body-Spamschutzregel 30
+/At our pharmacy we offer/ REJECT Body-Spamschutzregel 31
+/Was ist besser als eine fette Ladung Sahne/ REJECT Body-Spamschutzregel 32
+/www.surerxmed.com/ REJECT Body-Spamschutzregel 33
+/www.surerxpills.com/ REJECT Body-Spamschutzregel 34
+/www.stifyems.com/ REJECT Body-Spamschutzregel 35
+/www.diatrus.com/ REJECT Body-Spamschutzregel 36
+/CITYNETT-NEWSLETTER/i REJECT Body-Spamschutzregel 37
+/Note: *Use *password/ REJECT Body-Spamschutzregel 38
+/ will be disabled because of improper using/ REJECT Body-Spamschutzregel 39
+/i.*don.*like.*the*.plaintext/ REJECT Body-Spamschutzregel 40
+/archive *password/ REJECT Body-Spamschutzregel 41
+# /The *Attac..* *team/ REJECT Body-Spamschutzregel 42
+/The *Attac.org *team/ REJECT Body-Spamschutzregel 43
+/The *Attac.de *team/ REJECT Body-Spamschutzregel 44
+/The *Attac-netzwerk.de *team/ REJECT Body-Spamschutzregel 45
+/The *Jpberlin.de *team/ REJECT Body-Spamschutzregel 46
+/Our main mailing server/ REJECT Body-Spamschutzregel 47
+/please update your profile at Billing Center/ REJECT Body-Spamschutzregel 48
+/WSEAS will reply to you/ REJECT Body-Spamschutzregel 49
+/de.componentsengine.net/ REJECT Body-Spamschutzregel 50
+/List von Components Engine eingetragen/ REJECT Body-Spamschutzregel 51
+/The Weekend Pill - Xialis is safer, quicker, lasts longers/ REJECT Body-Spamschutzregel
+/Muzenda der �teste Sohn von Paul Muzenda bin , einem Farmer in Simba/ REJECT Body-Spamschutzregel 53
+/Alles fr die Autorennbahn/ REJECT Body-Spamschutzregel 54
+/Der Wurm nennt sich selbst "ODIN" und konnte sich bist jetzt/ REJECT Body-Spamschutzregel 55
+/NICHT ABHEBEN, SONDERN SOFORT ABWEISEN/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 56
+/Es ist ein Virus, welcher alle IMEI und IMSI Daten/ REJECT Body-Spamschutzregel Das ist ein HOAX, eine Falschmeldung. http://www.hoax-info.de 57
+/Der Meister unter den Druckprogrammen: PRINTMASTER 8 GOLD/ REJECT Body-Spamschutzregel 58
+/Stellen Sie sich vor, Sie kaufen ein Produkt oder eine Dienstleistung im/ REJECT Body-Spamschutzregel 59
+/So finden Sie blitzschnell den NAMEN und ADRESS-EINTRAG zu jeder/ REJECT Body-Spamschutzregel 60
+/^TVqQAAMAAAAEAAAA\/\/8AALgAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA$/ REJECT Body-Spamschutzregel Due to recent virus attacks, we temporarily block all Win32 executable files. Please re-send your attachment in a compressed (tar, zip, rar, etc.) form. Your message has NOT been delivered. 61
+/eptember 2003, Cumulative Patch/ REJECT Body-Spamschutzregel 62
+/Ich bin gerade vor einem neuen.*sehr gef�rlichen V.rus gewarnt/ REJECT Body-Spamschutzregel 63
+/^RSLxwtYBDB6FCv8ybBcS0zp9VU5of3K4BXuwyehTM0RI9IrSjVuwP94xfn0wgOjouKWzGXHVk3qg$/ REJECT Body-Spamschutzregel This is a Sobig-Worm! 64
+/exklusives virtuelles Gratis-Rubbellos welches Sie gleich jetzt live mit/ REJECT Body-Spamschutzregel 65
+/Willkommen beim Lucky7Casino/ REJECT Body-Spamschutzregel 66
+/heutzutage spielen Kontakte und Adressdaten eine immer wichtigere Rolle./ REJECT Body-Spamschutzregel 67
+/REVERZ anhand des Datenbestands der D-Info den gesuchten/ REJECT Body-Spamschutzregel 68
+/www.privatseitennetz.com/ REJECT Body-Spamschutzregel 69
+/Outlook and Outlook Express as well as five newly/ REJECT Body-Spamschutzregel 70
+/delog@cip.informatik.uni-wuerzburg.de/ REJECT Body-Spamschutzregel 71
+/credit.hostfree2003.com/ REJECT Body-Spamschutzregel 72
+/www.mediabiz.de.ewmail/ REJECT Body-Spamschutzregel 73
+/Want to boost your sales with Internet/ REJECT Body-Spamschutzregel 74
+/talente.tripod.com.br/ REJECT Body-Spamschutzregel 75
+/schlechte Schufa-Auskunft? Bonit�sprobleme? Dann w�len Sie doch/ REJECT Body-Spamschutzregel 76
+/Diese Liste von Banken, Sparkassen Volks- und Raiffeisenbanken OHNE Schufa-Anschluss finden Sie nicht/ REJECT Body-Spamschutzregel 77
+/Gute Nachrichten. Gerade habe ich die geile \"FickShow\" gefunden:/ REJECT Body-Spamschutzregel 78
+/Gute Nachrichten. Gerade habe ich die geile "FickShow" gefunden:/ REJECT Body-Spamschutzregel 79
+/Create Professional 3D Page-Tuning/ REJECT Body-Spamschutzregel 80
+/SEXKONTAKTE ONLINE/ REJECT Body-Spamschutzregel 81
+/FREE Access to.*adult.*sites/i REJECT Body-Spamschutzregel 82
+/web-supermarket.com/i REJECT Body-Spamschutzregel 83
+/Wir haben ihre Adresse durch eines unserer Partnerunternehmen/ REJECT Body-Spamschutzregel 84
+/Wir haben ihre Adresse.*Partnerunternehmen/i REJECT 85
+/herbal-place.com/ REJECT Body-Spamschutzregel 86
+/GIO DIET-CAPS greifen hier ein durch:/ REJECT Body-Spamschutzregel 87
+/These are Free Cash Grants That you NEVER have to repay/ REJECT Body-Spamschutzregel 88
+/Wir haben unseren Zugang neu upgedadet/ REJECT Body-Spamschutzregel 89
+/Jemand der Dich sehr gut kennt wuerde gern ein Treffen mit Dir/i REJECT Body-Spamschutzregel 90
+/Wenn Du wissen willst wer Dich treffen moechte/i REJECT Body-Spamschutzregel 91
+/You Have Won a FREEE/i REJECT Body-Spamschutzregel 93
+/Click Here For All Your Favorite Pornstars/i REJECT Body-Spamschutzregel 94
+/Year the U.S. Government Gives away BILLIONS in cash grants/i REJECT Body-Spamschutzregel 95
+/Banken ohne Schufa-Auskunft/i REJECT Body-Spamschutzregel 96
+/Probleme mit der Schufa/i REJECT Body-Spamschutzregel 97
+/Laden Sie sich jetzt unsere kostenlose Zugangssoftware runter/ REJECT Body-Spamschutzregel 98
+/Genocide Is A Black-And-White Concept/ REJECT Body-Spamschutzregel 99
+/So viele Wuensche auf einmal/ REJECT Body-Spamschutzregel 100
+/diese Mail ist kein SPAM/i REJECT Body-Spamschutzregel 101
+/Sch.*ne Gr.*e von Lucky Casino/ REJECT Body-Spamschutzregel 102
+/Weil Sie oder ein anderer bei Lucky Casino/i REJECT Body-Spamschutzregel 103
+/Endlich habe ich Deine E-Mail Adresse wieder gefunden, das hat aber/i REJECT Body-Spamschutzregel 104
+/galerie kurt im hirsch/ REJECT Body-Spamschutzregel
+/X-MS_Scanner: Kein Virus erkannt/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+/Anti_Virus Service/ REJECT Body-Spamschutzregel Sober-Wurmsignatur
+
+#
+# Checks gesammelt aus dem Netz von
+# http://www.hispalinux.es/~data/postfix/
+#
+/.*www\.removeyou\.com.*/ REJECT Body-Spamschutzregel 110
+/.*waterforge\.com.*/ REJECT Body-Spamschutzregel 111
+/.*capitalwave\.com\?subject=Please*/ REJECT Body-Spamschutzregel 112
+/\.virtmundo\.com/ REJECT Body-Spamschutzregel 113
+#/Accept Credit Cards/ REJECT Body-Spamschutzregel 114
+/Nude Celebrities/ REJECT Body-Spamschutzregel 115
+/PRODUCT or SERVICE/i REJECT Body-Spamschutzregel 116
+# /GUARANTEED!/ REJECT Body-Spamschutzregel 117
+/Amateur Girls/ REJECT Body-Spamschutzregel 118
+#/FREE MEMBERSHIP/ REJECT Body-Spamschutzregel 119
+#/bizinfo/ REJECT Body-Spamschutzregel 120
+# block iframe hack 122
+/<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>/ REJECT Body-Spamschutzregel 123
+# some porn spam phrases 125
+/^Big tit lovers unite\.$|\bcum.?(shoo?ts|slurp)|swallow(ing)? cum\b|\bcum\b.*swallow(ing)?|\b(ass|arse).?fucking|(tight|wet|shaved|young|teen)+ pussy|fuck.?fest|pussy.?juice|\bcum all over|compulsive masturbators agree|explicit hardcore|(nasty|teen).*\bsluts?|You received this mail because our records show that you have asked to receive|(TEEN|ANAL) FUCK SITE|delete this mail( now)? if (you|u) do not want porn|HARDCORE PORN|HORNY FARMGIRLS/ REJECT Body-Spamschutzregel 126
+# some nigerian scam phrases 128
+/^Dear.*(Fellow.*Entrepreneur|Achiever|adult.*webmaster|Internet.*user|Future.*Millionaire)/ REJECT Body-Spamschutzregel 129
+# Wg. Postfiy-Problem auskommentiert?! 130
+#/(Dan Dakova|(TO|Attn *)[;:]? *(The )?President *\/ *C\.?E\.?O\.?|STRICTLY CONFIDENTIAL BUSINESS PROPOSAL|MR(?:\.|=2e)? PATRICE MILLER|President of Crane International Trading Corp(?:\.|=2e)|44-775-281-5820|44-7799289001|44-7092374892|44-7092343325|JOSEPH NWOSU|HARRY KONGOLO|JAMES GIWA|(Umaru|Aminatou) Hamidu|PERSONAL AND STRICTLY CONFIDENTIAL|It is with my profound dignity that I write you this very important|REQUEST FOR URGENT BUSINESS|Marshall Kabba|WITH DUE RESPECT AND HUMIILITY I WRITE YOU|I GOT YOUR CONTACT THROUGH INTERNATIONAL BUSINESS|Your contact address got to me through the Internet|MOHAMMED(?:\.|=2e)?\s?ABACHA|will forward to you a duly signed POWER OF ATTORNEY|Edith M(?:\.|=2e)? Koromah|I must solicit your strictest confidence in this transaction|MRS(?:\.|=2e)? ?M.? ?SESE-SEKO|WIDOW OF LATE PRESIDENT MOBUTU|ATTN:\s*MANAGING DIRECTOR|PERMIT ME TO INFORM YOU OF MY DESIRE OF GOING INTO|MR MOMADOU LEY|I AM BARRISTER ABDULKARIMI A(?:\.|=2e)? BRUME|^\s*ATTN\s*;\s*$|BRAM KHUMALO|(Sandra|Jonas) Savimbi|Million\b.{0,40}\b(?:United States? Dollars?|USD)|BASED ON INFORMATION GATHERED ABOUT YOU|POSITION TO HELP US IN TRANSFER|Government of Nigeria|NIGERIAN? NATIONAL|Nigerian? Government|Bank of Nigeria|Mpeti Kabila|President LAURENT DESIRE KABILA|CLEMENT OSHODI|URGENT & CONFIDENTIAL BUSINESS PROPOSAL|DEPARMENT OF PETROLEUM RESOURCES|Federal Ministry of works and Housing in Nigeria|Director of Contracts and Finance Allocation|CHIENCHEN YU|Dangote Ahmed|CHRIS KAASA|I WAIT YOUR URGENT RESPONSE|PRESIDENT DAWUDU JAWARA|JAMES ADELEKE|I am soliciting your involvement in a business|MIRIAM ABACHA|wife of the (?:late )?Nigeria|Kamuzu Thandiwe)/ REJECT Body-Spamschutzregel 131
+# misc spam phrases 133
+/(Kathmandu Temple Kiff|Do You Have The Yen To Be a A Millionaire\?|This message is brought to you by BerryTrim Affiliate|A \$5,000 Investment in the Euro vs the dollar, "?properly positioned"?|Reply( back)? with "?remove"? in( the)? subject line|To be removed (send e?-?mail|from further mailings)|If you have the staff to field the leads I can generate|Do you need more Traffic to your website\?|herbal viagra)/ REJECT Body-Spamschutzregel 134
+# Covers off most of the double extension virus attachments- more you have 140
+# in one line the more efficient it is 141
+/^Content-Disposition: attachment;filename=".*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)"$/ REJECT Body-Spamschutzregel 142
+/^Content-Disposition: attachment;filename=.*\.(doc|zip|exe|xls|jpg|gif)\.(pif|bat|com|exe|lnk)$/ REJECT Body-Spamschutzregel 143
+/(filename|name)="(WTC|wtc|README)\.EXE"/ REJECT Body-Spamschutzregel 145
+/(filename|name)="(Happy99|Navidad|prettypark|pretty park|zipped_files|flcss|Msinit|wininit|msi216|readme|README|Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 146
+/(filename|name)="(dhcp*|Emanuel|kmbfejkm|NakedWife|Seicho_no_ie|JAMGCJJA|Sulfnbk)\.exe"/ REJECT Body-Spamschutzregel 147
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 148
+/to be removed[,]* please click.*link/ REJECT Body-Spamschutzregel 151
+# /to be removed[,]* from (the|my|our) (mailing|email|e-mail)*[ ]*list/ REJECT Body-Spamschutzregel 152
+/to be removed[,]* from.*(mailings|offers)/ REJECT Body-Spamschutzregel 153
+/to be removed[,]* from the list send a blank email/ REJECT Body-Spamschutzregel 154
+/to be removed[,]* [e]*[-]*mail.*with/ REJECT Body-Spamschutzregel 155
+/to remove[,]* please send a blank email/ REJECT Body-Spamschutzregel 156
+#/remove yourself from this list/ REJECT Body-Spamschutzregel 157
+/removed from our mail agents/ REJECT Body-Spamschutzregel 158
+/to remove yourself immediately/ REJECT Body-Spamschutzregel 159
+/to remove yourself from future/ REJECT Body-Spamschutzregel 160
+/Rem[o]*ve me fro[nm] any (furhter|further) mailings/ REJECT Body-Spamschutzregel 161
+/remove yourself from any future mailings/ REJECT Body-Spamschutzregel 162
+/to no longer receive this message reply/ REJECT Body-Spamschutzregel 163
+/to no longer receive messages click the link/ REJECT Body-Spamschutzregel 164
+/to no longer receive messages please click the link/ REJECT Body-Spamschutzregel 165
+/our broadcast email software/ REJECT Body-Spamschutzregel 166
+/there are no federal regulations or laws on (email|e-mail) advertising/ REJECT Body-Spamschutzregel 167
+/to receive (no|any) (further|future) (offers|mailings)/ REJECT Body-Spamschutzregel 168
+/do not wish to receive future (e-mail|email)/ REJECT Body-Spamschutzregel 169
+# /do not wish to receive (e-mail|email)/ REJECT Body-Spamschutzregel 170
+/unsubscribe from Virtumundo Rewards/ REJECT Body-Spamschutzregel 171
+/if you do not wish to receive email from me/ REJECT Body-Spamschutzregel 172
+/reply with the word remove in the subject line/ REJECT Body-Spamschutzregel 173
+/reply address on this email was active at the time this email was sent/ REJECT Body-Spamschutzregel 174
+/not a registered investment advisor/ REJECT Body-Spamschutzregel 175
+/sent by corporate micro mail manager/ REJECT Body-Spamschutzregel 176
+/to be stop future mailings/ REJECT Body-Spamschutzregel 177
+/to stop future mailings/ REJECT Body-Spamschutzregel 178
+/to be taken off the mailing list please click below/ REJECT Body-Spamschutzregel 179
+/sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 180
+/sent in compliance (with|of)/ REJECT Body-Spamschutzregel 181
+/compliance with the current federal legislation/ REJECT Body-Spamschutzregel 182
+/comply with proposed federal legislation/ REJECT Body-Spamschutzregel 183
+/permanently (deleted|removed) from our (database|list)/ REJECT Body-Spamschutzregel 184
+/to be removed your email from our mailing list/ REJECT Body-Spamschutzregel 185
+/this mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 186
+/this[ ]*message[ ]*is[ ]*being[ ]*sent[ ]*in[ ]*full[ ]*compliance/ REJECT Body-Spamschutzregel 187
+/this is a one[-\ ]*time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 188
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 189
+/cannot be considered spam/ REJECT Body-Spamschutzregel 190
+/cannot be considered as spam/ REJECT Body-Spamschutzregel 191
+/(respect|honor|honour) all removal requests/ REJECT Body-Spamschutzregel 192
+/no longer wish to receive these offers/ REJECT Body-Spamschutzregel 193
+/you will not receive this offer again/ REJECT Body-Spamschutzregel 194
+/this is not an unsolicited mail/ REJECT Body-Spamschutzregel 195
+/this email has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 196
+/has not been sent unsolicited/ REJECT Body-Spamschutzregel 197
+#/(wish|would) to be removed from (our|the)/ REJECT Body-Spamschutzregel 199
+/all removes (honored|honoured)/ REJECT Body-Spamschutzregel 200
+/To[ ]+remove[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 201
+/to[ ]+be[ ]+removed[ ]+.*@excite.com/ REJECT Body-Spamschutzregel 202
+/removemenow@excite.com/ REJECT Body-Spamschutzregel 204
+/1800cruisesandtours\.com/ REJECT Body-Spamschutzregel 205
+/freewebdirect\.net/ REJECT Body-Spamschutzregel 206
+/new-herbalway\.com/ REJECT Body-Spamschutzregel 207
+/advantagesweb\.com/ REJECT Body-Spamschutzregel 208
+/phytohealing\.com/ REJECT Body-Spamschutzregel 209
+/tradersprophet\.com/ REJECT Body-Spamschutzregel 210
+/ugot2see\.com/ REJECT Body-Spamschutzregel 211
+/hotlatinparadise\.com/ REJECT Body-Spamschutzregel 212
+/pearlgolf\.com/ REJECT Body-Spamschutzregel 213
+/halloweenomania\.com/ REJECT Body-Spamschutzregel 214
+/gofortuneonline\.com/ REJECT Body-Spamschutzregel 215
+/scantexas\.com/ REJECT Body-Spamschutzregel 216
+/buildreferrals\.com/ REJECT Body-Spamschutzregel 217
+/removeyou\.com/ REJECT Body-Spamschutzregel 218
+/cashbackmall\.com/ REJECT Body-Spamschutzregel 219
+/pageitnow\.net/ REJECT Body-Spamschutzregel 220
+/easycream\.com/ REJECT Body-Spamschutzregel 221
+/optinrealbig\.com/ REJECT Body-Spamschutzregel 222
+/realgreatgifts\.com/ REJECT Body-Spamschutzregel 223
+/realcheapgifts\.com/ REJECT Body-Spamschutzregel 224
+/pillsofpleasure\.com/ REJECT Body-Spamschutzregel 225
+/greathealthpills\.com/ REJECT Body-Spamschutzregel 226
+/saverealbigdeals\.com/ REJECT Body-Spamschutzregel 227
+/saverealbigstore\.com/ REJECT Body-Spamschutzregel 228
+/realbigwinners\.com/ REJECT Body-Spamschutzregel 229
+/saverealbig\.com/ REJECT Body-Spamschutzregel 230
+/extremetraffic_rem@excite\.com/ REJECT Body-Spamschutzregel 232
+/tccoptin@yahoo\.com/ REJECT Body-Spamschutzregel 233
+/tccoptout@yahoo.com/ REJECT Body-Spamschutzregel 234
+/stop026@excite\.com/ REJECT Body-Spamschutzregel 235
+/pleasestopsending@hotmail.com/ REJECT Body-Spamschutzregel 236
+/viperdrawing@winning.com/ REJECT Body-Spamschutzregel 237
+/mailto:.*\@.*\?subject\=(3D)*(remove|removeme|pleasedelete|pleaseremove|deleteme)+/ REJECT Body-Spamschutzregel 238
+/StudioPros/ REJECT Body-Spamschutzregel 240
+/universal advertising systems/ REJECT Body-Spamschutzregel 241
+/androstenone pheromone concentrate/ REJECT Body-Spamschutzregel 242
+/message was sent by a[n]* independent advertising company/ REJECT Body-Spamschutzregel 243
+/amazing cash products/ REJECT Body-Spamschutzregel 244
+/penis.*growth/ REJECT Body-Spamschutzregel 245
+/vortex[ ]+supplies/ REJECT Body-Spamschutzregel 246
+/international trade sources llc/ REJECT Body-Spamschutzregel 247
+/postmasterdirect inc/ REJECT Body-Spamschutzregel 248
+/free no obligation consultation/ REJECT Body-Spamschutzregel 249
+/voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 250
+/get back.*years of your income taxes/ REJECT Body-Spamschutzregel 251
+/click here for your free quote/ REJECT Body-Spamschutzregel 252
+/click here to be (permanently)* ?(removed|deleted)/ REJECT Body-Spamschutzregel 253
+/to unsubscribe do nothing/ REJECT Body-Spamschutzregel 254
+/OTCBB Stock Alert/ REJECT Body-Spamschutzregel 255
+/apparently you have filled out an online form/ REJECT Body-Spamschutzregel 257
+/list management software will not know/ REJECT Body-Spamschutzregel 258
+/message will only be sent once/ REJECT Body-Spamschutzregel 259
+/found this company on the internet/ REJECT Body-Spamschutzregel 260
+/you will not receive any future mailings/ REJECT Body-Spamschutzregel 261
+/all removal requests are (honored|honoured)/ REJECT Body-Spamschutzregel 262
+/you will be removed from our mailing[ ]*list and receive no further information from us/ REJECT Body-Spamschutzregel 263
+/we include contact information and a method to be removed from our mailing[ ]*list/ REJECT Body-Spamschutzregel 264
+/there is no need to unsubscribe/ REJECT Body-Spamschutzregel 265
+/I have made every attempt to target this message/ REJECT Body-Spamschutzregel 266
+/If you do not wish to be on our list then click here/ REJECT Body-Spamschutzregel 267
+/If you are not interested in receiving information/ REJECT Body-Spamschutzregel 268
+/your request will be (honored|honoured) with prompt removal/ REJECT Body-Spamschutzregel 269
+/if you feel you got this e[-]*mail by mistake/ REJECT Body-Spamschutzregel 270
+/to have us permanently remove you from our list/ REJECT Body-Spamschutzregel 271
+/we guarantee you will not receive any future e[-]*mails from us/ REJECT Body-Spamschutzregel 272
+/if you would rather not receive future e[-]*mails/ REJECT Body-Spamschutzregel 273
+/we do not intend to send any future e[-]*mails/ REJECT Body-Spamschutzregel 274
+/further emailing to you by the of this email may be stopped/ REJECT Body-Spamschutzregel 275
+/by the of this email may be stopped/ REJECT Body-Spamschutzregel 276
+/receiving this e[-]*mail because you opted[-\ ]in/ REJECT Body-Spamschutzregel 277
+/this email has been sent to you because someone at this e[-]*mail address/ REJECT Body-Spamschutzregel 278
+/to have your name removed from our email database/ REJECT Body-Spamschutzregel 279
+/stopped at no cost to you by sending a reply to this e[-]*mail address/ REJECT Body-Spamschutzregel 280
+/this message is an advertisement/ REJECT Body-Spamschutzregel 281
+/immediately removed from receiving any more information/ REJECT Body-Spamschutzregel 282
+/would not like to receive future messages/ REJECT Body-Spamschutzregel 283
+/tell us you would not like to continue to receive such e[-]*mails/ REJECT Body-Spamschutzregel 284
+/advertise your product or service using bulk email services/ REJECT Body-Spamschutzregel 285
+/You have been specially selected to qualify/ REJECT Body-Spamschutzregel 286
+/while working from the privacy of your own home/ REJECT Body-Spamschutzregel 287
+/e[-]*mail messages may be stopped/ REJECT Body-Spamschutzregel 288
+/list removal\/opt[-\ ]*out/ REJECT Body-Spamschutzregel 289
+/this is a no obligation qualification form/ REJECT Body-Spamschutzregel 290
+/please notify the sender immediately with .*remove/ REJECT Body-Spamschutzregel 291
+/home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 292
+/(filename|name)="(Happy99|Navidad|prettypark)\.exe"/ REJECT Body-Spamschutzregel 294
+/(filename|name)="(pretty park|zipped_files|flcss)\.exe"/ REJECT Body-Spamschutzregel 295
+/(filename|name)="(Msinit|wininit|msi216|CFGWIZ31)\.exe"/ REJECT Body-Spamschutzregel 296
+/(filename|name)="(Avp_updates|Qi_test|Anti_cih)\.exe"/ REJECT Body-Spamschutzregel 297
+/(filename|name)="(Emanuel|kmbfejkm|NakedWife|Readme|readme)\.exe"/ REJECT Body-Spamschutzregel 298
+/(filename|name)="(Seicho_no_ie|JAMGCJJA|Sulfnbk|QuickLnk)\.exe"/ REJECT Body-Spamschutzregel 299
+/(filename|name)="(Readme|readme)\.eml"/ REJECT Body-Spamschutzregel 300
+/(kak|day)\.(reg|hta)/ REJECT Body-Spamschutzregel 302
+/Rem I am sorry/ REJECT Body-Spamschutzregel 303
+/Te mando este archivo para que me des tu punto de vista/ REJECT Body-Spamschutzregel 304
+/I send you this file in order to have your advice/ REJECT Body-Spamschutzregel 305
+/Espero me puedas ayudar con el archivo que te mando/ REJECT Body-Spamschutzregel 306
+/Espero te guste este archivo que te mando/ REJECT Body-Spamschutzregel 307
+/Este es el archivo con la informaci� que me pediste/ REJECT Body-Spamschutzregel 308
+/I hope you can help me with this file that I send/ REJECT Body-Spamschutzregel 309
+/I hope you like the file that I send you/ REJECT Body-Spamschutzregel 310
+/This is the file with the information that you ask for/ REJECT Body-Spamschutzregel 311
+/0 Business Fax Numbers/ REJECT Body-Spamschutzregel 314
+/1[-\ ]Time Mailling/ REJECT Body-Spamschutzregel 315
+/30 day money back guarantee/ REJECT Body-Spamschutzregel 316
+/A New Loan Makes Sense/ REJECT Body-Spamschutzregel 317
+/Advertise your product or service/ REJECT Body-Spamschutzregel 318
+/Aging While Burning Fat/ REJECT Body-Spamschutzregel 319
+/Amazing cash products/ REJECT Body-Spamschutzregel 320
+/Androstenone/ REJECT Body-Spamschutzregel 321
+/Attract Members of The Opposite/ REJECT Body-Spamschutzregel 322
+/Automatic Stock Picking Software/ REJECT Body-Spamschutzregel 323
+/Bad Credit Is History/ REJECT Body-Spamschutzregel 324
+/Banner Advertising Price/ REJECT Body-Spamschutzregel 325
+/Barnyard Fucking/ REJECT Body-Spamschutzregel 326
+/BEAUTIFUL Women On The Web/ REJECT Body-Spamschutzregel 327
+/Because Our Records Indicate That You Are A/ REJECT Body-Spamschutzregel 328
+# /Because You Agree/ REJECT Body-Spamschutzregel 329
+/Because You Have Subscribed To One Of Our/ REJECT Body-Spamschutzregel 330
+#/Because You Registered/ REJECT Body-Spamschutzregel 331
+/Because You Signed Up At One/ REJECT Body-Spamschutzregel 332
+/Best Porn/ REJECT Body-Spamschutzregel 333
+/Buy Preforeclosure Houses/ REJECT Body-Spamschutzregel 334
+/Cable TV Descrambler/ REJECT Body-Spamschutzregel 335
+/Cannot be Considered Spam/ REJECT Body-Spamschutzregel 336
+/Cannot be Considered As Spam/ REJECT Body-Spamschutzregel 337
+/Caso nao desejar receber este tipo de email novamente/ REJECT Body-Spamschutzregel 338
+/Click Here For Your Free Quote/ REJECT Body-Spamschutzregel 339
+/Click Here To Avoid This In The Future/ REJECT Body-Spamschutzregel 340
+/Compliance with the current federal legislation/ REJECT Body-Spamschutzregel 341
+/Copy DVD Movies/ REJECT Body-Spamschutzregel 343
+/Creating Immediate Wealth/ REJECT Body-Spamschutzregel 344
+/Cum Shots/ REJECT Body-Spamschutzregel 345
+/Dear Future/ REJECT Body-Spamschutzregel 348
+#/Dear Entrepreneur/ REJECT Body-Spamschutzregel 349
+/Debt Consolidation/ REJECT Body-Spamschutzregel 350
+/Do You Want Financial/ REJECT Body-Spamschutzregel 351
+/Don't Need A Prescription/ REJECT Body-Spamschutzregel 352
+/E[-\ ]Mail Bill Section 301/ REJECT Body-Spamschutzregel 353
+/Earn A Full Time Income/ REJECT Body-Spamschutzregel 354
+/Easily Lose Weight/ REJECT Body-Spamschutzregel 355
+/Equalamail/ REJECT Body-Spamschutzregel 356
+/Email Bill Section 301/ REJECT Body-Spamschutzregel 357
+/Erotic Travel Guide/ REJECT Body-Spamschutzregel 358
+/Fat Blocker/ REJECT Body-Spamschutzregel 359
+/Fellow Internet entrepeneur/ REJECT Body-Spamschutzregel 360
+/Figure Income Earners/ REJECT Body-Spamschutzregel 361
+/Find Out Anything About Anyone/ REJECT Body-Spamschutzregel 362
+/Fix Your Credit/ REJECT Body-Spamschutzregel 363
+/Found this company on the internet/ REJECT Body-Spamschutzregel 364
+/Free Bulk Email/ REJECT Body-Spamschutzregel 365
+/Free Direct Email/ REJECT Body-Spamschutzregel 367
+/Free Multiple Moving Cost/ REJECT Body-Spamschutzregel 368
+/Free no obligation/ REJECT Body-Spamschutzregel 369
+/Free Private Webcam/ REJECT Body-Spamschutzregel 370
+/Free S e x/ REJECT Body-Spamschutzregel 371
+/Free Sex/ REJECT Body-Spamschutzregel 372
+/Free Vacation Giveaway/ REJECT Body-Spamschutzregel 373
+/Free XXX/ REJECT Body-Spamschutzregel 374
+/From A Concerned Gas User/ REJECT Body-Spamschutzregel 375
+/Get back.*years of your income taxes/ REJECT Body-Spamschutzregel 376
+/Government Grants E-Book/ REJECT Body-Spamschutzregel 377
+/GROWTH HORMONE RELEASER/ REJECT Body-Spamschutzregel 378
+/Hardcore Animal Action/ REJECT Body-Spamschutzregel 379
+/Hardcore Barnyard/ REJECT Body-Spamschutzregel 380
+/Hardcore Fist/ REJECT Body-Spamschutzregel 381
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 382
+/Home[-\ ]based income opportunity/ REJECT Body-Spamschutzregel 383
+/Has not been sent unsolicited/ REJECT Body-Spamschutzregel 384
+/I Will Personally Show You How/ REJECT Body-Spamschutzregel 385
+/Independent advertising company/ REJECT Body-Spamschutzregel 386
+/Incredible Life Changing/ REJECT Body-Spamschutzregel 387
+/It Has Been Going Since/ REJECT Body-Spamschutzregel 388
+/Hardcore Animal/ REJECT Body-Spamschutzregel 389
+/Hardcore Fucking/ REJECT Body-Spamschutzregel 390
+/Hardcore Teens/ REJECT Body-Spamschutzregel 391
+/Hardcore Unsuspecting/ REJECT Body-Spamschutzregel 392
+/Has not been sent to you unsolicited/ REJECT Body-Spamschutzregel 393
+/Hear About Future Offers From Us/ REJECT Body-Spamschutzregel 394
+/Hear About Offers From Us/ REJECT Body-Spamschutzregel 395
+/Hot Horny Girls/ REJECT Body-Spamschutzregel 396
+/Hot Young Nasty/ REJECT Body-Spamschutzregel 397
+/Huge Wild Animals/ REJECT Body-Spamschutzregel 398
+/Improve Sexual Vigor/ REJECT Body-Spamschutzregel 399
+#/If you no longer wish to receive/ REJECT Body-Spamschutzregel 400
+/If you prefer not to receive future emails/ REJECT Body-Spamschutzregel 401
+/I'm a total exibitionist/ REJECT Body-Spamschutzregel 402
+/Im a total exibitionist/ REJECT Body-Spamschutzregel 403
+/In Compliance With The New E[-\ ]Mail Bill/ REJECT Body-Spamschutzregel 404
+#/Interest rates are rising/ REJECT Body-Spamschutzregel 405
+/Just ONE click away from showing you/ REJECT Body-Spamschutzregel 406
+/Lender referral service/ REJECT Body-Spamschutzregel 407
+/Lenders Compete For Your Business/ REJECT Body-Spamschutzregel 408
+/Life Changing Opportunity/ REJECT Body-Spamschutzregel 409
+/Lips Around Your/ REJECT Body-Spamschutzregel 410
+/Locate Hidden Assets/ REJECT Body-Spamschutzregel 411
+/Lose Pounds And Inches/ REJECT Body-Spamschutzregel 412
+/Lose Some Weight Before/ REJECT Body-Spamschutzregel 413
+/Low[-\ ]Cost Viagra/ REJECT Body-Spamschutzregel 414
+/Lowest Mortgage/ REJECT Body-Spamschutzregel 415
+/Make money online/ REJECT Body-Spamschutzregel 416
+# /Marketing Method/ REJECT Body-Spamschutzregel 417
+/Million E[-\ ]mail Addresses/ REJECT Body-Spamschutzregel 418
+/Million Email Addresses/ REJECT Body-Spamschutzregel 419
+/Minutes To Complete Your Order/ REJECT Body-Spamschutzregel 420
+/Much More Effective For Both Partners/ REJECT Body-Spamschutzregel 421
+/Mortgage Quote/ REJECT Body-Spamschutzregel 422
+/Need Fod Adult Entertainment/ REJECT Body-Spamschutzregel 423
+/Never Sends Unsolicited Email/ REJECT Body-Spamschutzregel 424
+/No[-\ ]Spam Policy/ REJECT Body-Spamschutzregel 425
+/On my personal live Webcam/ REJECT Body-Spamschutzregel 427
+/One[-\ ]Time Mail/ REJECT Body-Spamschutzregel 428
+/One[-\ ]Time Non[-\ ]Commercial/ REJECT Body-Spamschutzregel 429
+/Opt-In To Our/ REJECT Body-Spamschutzregel 430
+/Opt-Out From Our/ REJECT Body-Spamschutzregel 431
+/Our Herbal Supplement/ REJECT Body-Spamschutzregel 432
+/Owning your first home/ REJECT Body-Spamschutzregel 433
+/Partner E[-\ ]mail Offers/ REJECT Body-Spamschutzregel 434
+/Partner Email Offers/ REJECT Body-Spamschutzregel 435
+/Penis.*growth/ REJECT Body-Spamschutzregel 436
+/Permanently (deleted|removed) From Our/ REJECT Body-Spamschutzregel 437
+/Permission Based E[-\ ]mail/ REJECT Body-Spamschutzregel 438
+/Permission Based Email/ REJECT Body-Spamschutzregel 439
+/Pheromone Concentrate/ REJECT Body-Spamschutzregel 440
+/Potent Pheromone/ REJECT Body-Spamschutzregel 441
+/Price Discount for New TLD Extensions/ REJECT Body-Spamschutzregel 442
+/Quality Amateur Action/ REJECT Body-Spamschutzregel 443
+/Ready to refinance/ REJECT Body-Spamschutzregel 444
+/Real Live Cameras And Movies/ REJECT Body-Spamschutzregel 445
+/Real LiveCameras And Movies/ REJECT Body-Spamschutzregel 446
+/Receive Special Offer/ REJECT Body-Spamschutzregel 447
+/Reduce Body Fat/ REJECT Body-Spamschutzregel 448
+/Refinance Your Home/ REJECT Body-Spamschutzregel 449
+/Second Mortgage/ REJECT Body-Spamschutzregel 450
+/Secure A Better Life For/ REJECT Body-Spamschutzregel 451
+/See How Much You Can Save/ REJECT Body-Spamschutzregel 452
+/Sent to you in compliance (with|of)/ REJECT Body-Spamschutzregel 453
+/Sent To You By A Marketing Partner/ REJECT Body-Spamschutzregel 454
+/Sent in compliance (with|of)/ REJECT Body-Spamschutzregel 455
+/Serious Inquiries Only Please/ REJECT Body-Spamschutzregel 456
+/Shop Hundreds Of Lenders/ REJECT Body-Spamschutzregel 457
+/Start Making $1/ REJECT Body-Spamschutzregel 458
+/Step To Financial Freedom/ REJECT Body-Spamschutzregel 459
+/Steps To Financial Freedom/ REJECT Body-Spamschutzregel 460
+/Suck My Cock/ REJECT Body-Spamschutzregel 461
+/Take A FREE Trip/ REJECT Body-Spamschutzregel 462
+/TAKE YOUR FIRST BIG STEP/ REJECT Body-Spamschutzregel 463
+/Targeted E[-\ ]mail List/ REJECT Body-Spamschutzregel 464
+/Targeted Email List/ REJECT Body-Spamschutzregel 465
+/The following gift or special offer was sent to you/ REJECT Body-Spamschutzregel 466
+/This email is not sent unsolicited/ REJECT Body-Spamschutzregel 467
+/This Is A One[-\ ]*Time (email|e-mail|mailing|offer)/ REJECT Body-Spamschutzregel 468
+/This mailing is done by an independent marketing/ REJECT Body-Spamschutzregel 469
+/To Be Removed From This Targeted/ REJECT Body-Spamschutzregel 470
+/To Claim Your Prize Click/ REJECT Body-Spamschutzregel 471
+/To Stop All Future Offers/ REJECT Body-Spamschutzregel 472
+/Under Bill s.1618/ REJECT Body-Spamschutzregel 473
+/Universal Advertising System/ REJECT Body-Spamschutzregel 474
+/Unlimited Phone Conversations/ REJECT Body-Spamschutzregel 475
+/Using Your Identity/ REJECT Body-Spamschutzregel 476
+/Virtumundo/ REJECT Body-Spamschutzregel 477
+/Voted sex[-\ ]server on the web/ REJECT Body-Spamschutzregel 478
+/We can award any degree/ REJECT Body-Spamschutzregel 479
+/We know it sounds impossible/ REJECT Body-Spamschutzregel 480
+# /Weight Loss [Drug\Medication]/ REJECT Body-Spamschutzregel 481
+/While working from the privacy of your own home/ REJECT Body-Spamschutzregel 482
+/Win Big Money Today/ REJECT Body-Spamschutzregel 483
+/Without Pumps Or Weights Or Stretches/ REJECT Body-Spamschutzregel 484
+/Wouldn't You Like Your Husband Or Boyfriend To Have/ REJECT Body-Spamschutzregel 485
+/You Agree To Receive Email Marketing From/ REJECT Body-Spamschutzregel 486
+/You Are Receiving This Exclusive Promotion/ REJECT Body-Spamschutzregel 487
+/You Are Registered At One Of Our/ REJECT Body-Spamschutzregel 488
+/You are receiving this mail because you have/ REJECT Body-Spamschutzregel 489
+/You Have Agreed To Receive/ REJECT Body-Spamschutzregel 490
+/You Can Search For Anyone/ REJECT Body-Spamschutzregel 491
+/You've Agreed To Receive/ REJECT Body-Spamschutzregel 492
+/You Registered At One Of Our/ REJECT Body-Spamschutzregel 493
+/You've Registered At One Of Our/ REJECT Body-Spamschutzregel 494
+/Your E[-\ ]mail Address Was Obtained/ REJECT Body-Spamschutzregel 495
+/Your Email Address Was Obtained/ REJECT Body-Spamschutzregel 496
+/Your Email Address Was Supplied/ REJECT Body-Spamschutzregel 497
+/Your Mail Address Was Supplied/ REJECT Body-Spamschutzregel 498
+/Your Penis Size/ REJECT Body-Spamschutzregel 499
+/Smart Tags, Smart Investments?/ REJECT Body-Spamschutzregel 500
+/faze the Neptune focal point and strive enterprising/ REJECT Body-Spamschutzregel 501
+/full moon insistence gist an packed/ REJECT Body-Spamschutzregel 502
+/a upward prominently field day health care the ridicule offing or Internet seemingly/ REJECT Body-Spamschutzregel 503
+/fanatic but consistency sluice scrape downtrodden five and ten on needless/ REJECT Body-Spamschutzregel 504
+/fuse box sick sister/ REJECT Body-Spamschutzregel 505
+/immediate fulfillment big deal and cashier/ REJECT Body-Spamschutzregel 506
+/in on parakeet quizzical chicken feed leper on square/ REJECT Body-Spamschutzregel 508
+/reference ounce a achiever sunblock syringe roadside longevity/ REJECT Body-Spamschutzregel 509
+/ocean distrust as antiperspirant coax lubricant entry, the northwestern politicize,/ REJECT Body-Spamschutzregel 510
+/By the time Scarlett had undressed and blown out the candle, her/ REJECT Body-Spamschutzregel 511
+/E-MAIL:czq7q67a@yahoo.co.jp/ REJECT Body-Spamschutzregel 512
# ===============================================
# [Immer mit aufsteiger Nummer sauber eintragen!]
#
-#
+
+/^Subject:.*Ihr freundlicher Support$/ REJECT Header-Spamschutzregel 1161
+/^From:.*@deutschseo.com/ REJECT Header-Spamschutzregel 1160
+/^X-RocketYMMF: webluck1847@att.net/ REJECT Header-Spamschutzregel 1159
+/^Subject: offizielle sieger/ REJECT Header-Spamschutzregel 1158
+/^From: *@verifiedbyvisa.fr*/ REJECT Header-Spamschutzregel 1157
+/^Replay-To: *@verifiedbyvisa.fr/ REJECT Header-Spamschutzregel 1156
+/^Replay-To: *girl@mailisfree.com/ REJECT Header-Spamschutzregel 1155
+/^Subject: vous devez reglez votre compte free.fr/ REJECT Header-Spamschutzregel 1154
/^Message-ID: *mscreator[0-9][0-9].fagms.de/ REJECT Header-Spamschutzregel 1153
/^Subject: gelegenheit zur webverbesserung/ REJECT Header-Spamschutzregel 1052
/^Subject: Achtung! Ihr paypal-Konto wurde begrenzt!/ REJECT Header-Spamschutzregel 1051
--- /dev/null
+# Version 3.70 / 25.09.2011
+#
+# Das Postfix-Buch - Sichere Mailserver mit Linux
+# http://www.postfixbuch.de - Peer Heinlein
+#
+# Heinlein Professional Linux Support GmbH
+# http://www.heinlein-support.de
+#
+# Downloadquelle dieser Datei: http://www.postfixbuch.de/web/service/checks/
+#
+#
+# Verwendung der Filtersammlung auf eigene Gefahr.
+#
+# Es handelt sich dabei um einen tagesaktuellen Auszug der beim
+# ISP "JPBerlin.de" genutzten Filterregeln. Bitte pruefen Sie vor einem
+# Einsatz bei Ihnen ganz genau, ob diese Regeln noch aktuell und sinnvoll
+# sind und ob Sie sie einsetzen moechten!
+#
+#
+# Setzen Sie in /etc/postfix/main.cf einfach
+#
+# header_checks = pcre:/etc/postfix/header_checks oder
+# oder
+# header_checks = regexp:/etc/postfix/header_checks
+#
+# und fuehren Sie "rcpostfix reload" aus.
+#
+# Tipp: pcre ist ein Drittel schneller als regexp!
+#
+#
+
+#
+# Die Nummern hinter dem REJECT tauchen spaeter iM SMTP-Error oder im Log
+# auf, um die Filter-Regel wiederzufinden, die den Block ausgeloest hat.
+# Es kann stattdessen auch einfacher Text benutzt werden.
+#
+
+
+#
+#
+# Besondere Regelungen ausserhalb unseres Spamschutzes
+# ===============================================
+#
+
+# Filtert Amavis-Einträge
+/^Received: from localhost/ IGNORE
+
+#
+# Domeus hat bis heute nicht den Unterschied zwischen Mailheader-To und
+# SMTP-Envelope-To verstanden und fabriziert seit nunmehr über sieben Jahren in
+# schöner Regelmäßigkeit Mailschleifen im vier/fünfstelligen Bereich.
+#
+# /^Received:.*domeus\.com/ REJECT Domeus baut Mailschleifen und hat wichtige RFCs nicht verstanden
+
+/X-policyd-weight:.*to=dresden@listen.attac.de/ IGNORE
+
+#
+#
+# Tagesaktuelle, nur voruebergehende Regelungen:
+# ===============================================
+# [Immer mit Timestamp (!) und ggf. Ticket-Nummer eintragen!]
+#
+/^Received: from 62.56.132.7.satcom-systems.net/ REJECT Header-Spamschutzregel TMP-1
+
+# 20110630 - HPLS-Ticket#: 2011063010000278
+/^Received: from dsl88-247-23947.ttnet.net.tr/ REJECT Header-Spamschutzregel TMP-2
+
+# 20110925 - u.A. HPLS-Ticket#: 2011092510000102
+/^Subject: *pdf ist Ihre Gewinnchancen Informationen*/ REJECT Header-Spamschutzregel TMP-3
+
+#
+#
+# Dauerhaft genutzte Regelungen:
+# ===============================================
+# [Immer mit aufsteiger Nummer sauber eintragen!]
+#
+#
+/^Message-ID: *mscreator[0-9][0-9].fagms.de/ REJECT Header-Spamschutzregel 1153
+/^Subject: gelegenheit zur webverbesserung/ REJECT Header-Spamschutzregel 1052
+/^Subject: Achtung! Ihr paypal-Konto wurde begrenzt!/ REJECT Header-Spamschutzregel 1051
+/^X-PHP-Script: campnetworking.ca\/images\/susscesful_soties\/nfoscomm.php*/ REJECT Header-Spamschutzregel 1050
+/^Subject:.*zusammenarbeit zur webverbesserung/ REJECT Header-Spamschutzregel 1049
+/^X-PHP-Script: biditsaleit.com\/dz\/mailer.php*/ REJECT Header-Spamschutzregel 1048
+/^Subject:.*from GMC manufacturer/ REJECT Header-Spamschutzregel 1047
+/^Return-Path: *ventouxl@ns[0-9]{3}.medialook.net/ REJECT Header-Spamschutzregel 1046
+/^From :.*Topillen Apotheke / REJECT Header-Spamschutzregel 1145
+/^Subject: Top Apotheke/ REJECT Header-Spamschutzregel 1144
+/^message-ID: *phx.gbl/ REJECT Header-Spamschutzregel 1143
+/^List-Unsubscribe: *e-mailing.pymac.fr\/[a-z]\/[a-z]\/[0-9]{4}\/[0-9]{6}/ REJECT Header-Spamschutzregel 1142
+/^Return-Path: *@oanm[0-9]{2}.com/ REJECT Header-Spamschutzregel 1141
+/^Subject: lighting products from GMC manufacturer/ REJECT Header-Spamschutzregel 1140
+/^Subject: OFFIZIELLE GEWINNBENACHRITIGUNG/ REJECT Header-Spamschutzregel 1139
+/^Subject: God bless you as you get back to me/ REJECT Header-Spamschutzregel 1038
+/^List-Unsubribe: *tk3.sbc01.com\/sy\/*/ REJECT Header-Spamschutzregel 1037
+/^List-Unsubscribe: *tk3.sbc01.com\/sy\/*/ REJECT Header-Spamschutzregel 1037
+/^Message-ID: *[0-9]{8}-[0-9]{8}-[0-9a-z]{3}-0@S102*/ REJECT Header-Spamschutzregel 1036
+/^Subject: *YOUR EMAIL HAS WON YOU GBP*/ REJECT Header-Spamschutzregel 1035
+/^From: *ventouxl@ns[0-9]?[0-9].medialook.net/ REJECT Header-Spamschutzregel 1034
+/^From: *gestioncreditexpert_[0-9]{4}@gce-mailer-[0-9]{2}.com/ REJECT Header-Spamschutzregel 1033
+/^From:.*erosvision.com/ REJECT Header-Spamschutzregel 1032
+/^From:*@payapl.fr/ REJECT Header-Spamschutzregel 1031
+# 20110706 - HPLS-Ticket#: 2011070610000053
+/^X-PHP-Script: mars.rapidvps.com\/~emoosite\/tmp\/install_4b10cb87da737\/languages\/site\/husa.php*/ REJECT Header-Spamschutzregel 1030
+/^Thread-Index: *Acvd0cAG8IQaasqAcNaztWODnM30ZA/ REJECT Header-Spamschutzregel 1029
+/^Subject: aktualisieren Sie Ihre Bankdaten/ REJECT Header-Spamschutzregel 1028
+/^Subject: Erfahrungsbericht Bernd Matthes/ REJECT Header-Spamschutzregel 1027
+/^Subject:.*IP PBX/i REJECT Header-Spamschutzregel 1026
+/^From:.*Nicoll Christopher John/ REJECT Header-Spamschutzregel 1025
+/^From:.*SHELL PETROLEUM/ REJECT Header-Spamschutzregel 1024
+/^From:.*Versicherungs Dienst/ REJECT Header-Spamschutzregel 1023
+/^From:.*soft-cd.com/ REJECT Header-Spamschutzregel 1022
+/^From: "Oxford Business News" <info@oxford-bn.org>/ REJECT Header-Spamschutzregel 1021
+/^Subject: =?iso-8859-1?Q?Leider_st=F6?= =?iso-8859-1?Q?ren_Sie.?=/ REJECT Header-Spamschutzregel 1020
+/^From:.*Elena.*@eposta.ru/ REJECT Header-Spamschutzregel 1019
+/^Subject:.*Results 2008 !/ REJECT Header-Spamschutzregel 1018
+/^From: Sponsor Lotto/ REJECT Header-Spamschutzregel 1017
+/^From:.*nodiet@web.de/ REJECT Header-Spamschutzregel 1016
+/^From:.*edirects.com/ REJECT Header-Spamschutzregel 1015
+/^Subject:.*WINNING NOTIFICATION!!!/ REJECT Header-Spamschutzregel 1014
+/^Subject:.*Wir wissen was Frauen wollern/ REJECT Header-Spamschutzregel 1013
+/^From:.*newscd\.org/ REJECT Header-Spamschutzregel 1012
+/^From:.*mms-und-sms-gutschein.com/ REJECT Header-Spamschutzregel 1011
+/^Subject:.*CONFIRM YOUR WINNING/ REJECT Header-Spamschutzregel 1010
+/^Subject:.*Gratisaktion - Du wurdest ausgewaehlt unseren neuen SMS/ REJECT Header-Spamschutzregel 1009
+/^From:.*Seitensprung/ REJECT Header-Spamschutzregel 1008
+/^Received:.*germans-mailc.com/ REJECT Header-Spamschutzregel 1007: Lisa-Schindler-Spam
+/^Received:.*stienitzsee.info/ REJECT Header-Spamschutzregel 1006
+/^Subject: Bonus 555eu/ REJECT Header-Spamschutzregel 1005
+/^Subject: *(ATTN|TO) *:.*SALES? *MANAGER/i REJECT Header-Spamschutzregel 1004
+/^Subject:.*Take this postcard now!/ REJECT Header-Spamschutzregel 1003
+/^Subject:.*FUXIN/ REJECT Header-Spamschutzregel 1002
+/^From:.*marion.backera/ REJECT Header-Spamschutzregel 1001
+/^Subject:.*kein spam. aber eine Antwort auf ihre Fragen/ REJECT Header-Spamschutzregel 1000
+
+
+
+
+# Nazi-Spam-Welle mit Hetze
+
+########################################
+if /^Subject:/i
+
+/^Subject: 4,8 Mill\. Osteuropaeer durch Fischer-Volmer Erlass/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Auf Streife durch den Berliner Wedding/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Auslaender bevorzugt/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Auslaenderpolitik/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Deutsche werden kuenftig beim Arzt abgezockt/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Du wirst zum Sklaven gemacht\!\!\!/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Graeberschaendung auf bundesdeutsche Anordnung/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Hier sind wir Lehrer die einzigen Auslaender/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Paranoider Deutschenmoerder kommt in Psychiatrie/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Tuerkei in die EU/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject: Verbrechen der deutschen Frau/ REJECT Header-Spamschutzregel Nazi Spam
+/^Subject:.*Skandal in Berlin/ REJECT Header-Spamschutzregel JPBERLIN-14
+/^Subject:.*Auslaendergewalt: Herr Rau, wo waren Sie?/ REJECT Header-Spamschutzregel JPBERLIN-15
+/^Subject:.*Bankrott des Gesundheitswesens durch Auslaender!/ REJECT Header-Spamschutzregel JPBERLIN-16
+/^Subject:.*Wer an ein Tabu ruehrt, muss und darf vernichtet werden/ REJECT Header-Spamschutzregel JPBERLIN-17
+/^Subject:.*EU Beitritt der Tuerkei/ REJECT Header-Spamschutzregel JPBERLIN-18
+/^Subject:.*Bin ich zu weltfremd.*Ich glaube wohl kaum/ REJECT Header-Spamschutzregel JPBERLIN-19
+/^Subject:.*Die Deform der sozialen Ordnung/ REJECT Header-Spamschutzregel JPBERLIN-20
+/^Subject:.*Moschee-Bau in Deutschland/ REJECT Header-Spamschutzregel JPBERLIN-21
+/^Subject:.*Augen auf.*So sieht es aus/ REJECT Header-Spamschutzregel JPBERLIN-22
+/^Subject:.*Paradies Bundesrepublik - Rente fuer die Welt/ REJECT Header-Spamschutzregel JPBERLIN-23
+/^Subject:.*Libanesen in Berlin/ REJECT Header-Spamschutzregel JPBERLIN-24
+/^Subject:.*Garather klagen ueber eskalierende Gewalt im Stadtteil!/ REJECT Header-Spamschutzregel JPBERLIN-24
+/^Subject:.*Auslaender erschleichen sich zunehmend Sozialleistungen/ REJECT Header-Spamschutzregel JPBERLIN-25
+/^Subject:.*Auslaenderkriminalitaet steigt weiter!/ REJECT Header-Spamschutzregel JPBERLIN-26
+/^Subject:.*Das kann unmoeglich sein -Leserbrief/ REJECT Header-Spamschutzregel JPBERLIN-27
+/^Subject:.*Nein zum Zuwanderungsgesetz !/ REJECT Header-Spamschutzregel JPBERLIN-28
+/^Subject:.*Skandalurteil in Darmstadt/ REJECT Header-Spamschutzregel JPBERLIN-29
+/^Subject:.*Auf Kosten der deutschen Beitragszahler und Rentner!/ REJECT Header-Spamschutzregel JPBERLIN-30
+/^Subject:.*Wir haben die Auslaender doch geholt/ REJECT Header-Spamschutzregel JPBERLIN-31
+/^Subject:.*TUERKEN-TERROR AM HIMMELFAHRTSTAG/ REJECT Header-Spamschutzregel JPBERLIN-32
+/^Subject:.*MULTI-KULTI-BANDE TYRANNISIERTE MITSCHUELER/ REJECT Header-Spamschutzregel JPBERLIN-33
+/^Subject:.*ASYLANTEN BEGRABSCHTEN DEUTSCHES MAEDCHEN/ REJECT Header-Spamschutzregel JPBERLIN-34
+/^Subject:.*Was Deutschland braucht, sind deutsche Kinder!/ REJECT Header-Spamschutzregel JPBERLIN-35
+/^Subject:.*Diplomatische Zensur/ REJECT Header-Spamschutzregel JPBERLIN-36
+/^Subject:.*EU gibt Erwerbslosen volle Freizuegigkeit/ REJECT Header-Spamschutzregel JPBERLIN-37
+/^Subject:.*Richter unterstuetzt kriminelle Auslaenderin/ REJECT Header-Spamschutzregel JPBERLIN-38
+/^Subject:.*Auslaenderanteile in Schweizer Gefaengnissen/ REJECT Header-Spamschutzregel JPBERLIN-39
+/^Subject:.*Augen auf! (So sieht es aus!)/ REJECT Header-Spamschutzregel JPBERLIN-40
+/^Subject:.*Neue Voelkerwanderung droht!/ REJECT Header-Spamschutzregel JPBERLIN-41
+/^Subject:.*Client TOS Notification/ REJECT Header-Spamschutzregel JPBERLIN-50
+/^Subject:.* CIALIS / REJECT Header-Spamschutzregel JPBERLIN-51: Cialis-Keyword
+/^Subject:.*Postbank Sicherheitsaktualisierung/ REJECT Header-Spamschutzregel JPBERLIN-52
+/^Subject:.*Sicherheitsaktualisierung/ REJECT Header-Spamschutzregel JPBERLIN-53
+/^Subject:.*Deutsche-bank Sicherheitsaktualisierung/ REJECT Header-Spamschutzregel JPBERLIN-54
+/^Subject:.*internet.*pharmacy/ REJECT Header-Spamschutzregel JPBERLIN-55
+/^Subject:.*Affordable Premade Logos/ REJECT Header-Spamschutzregel JPBERLIN-56
+/^Subject:.*Best prices.*on the net/ REJECT Header-Spamschutzregel JPBERLIN-57
+/^Subject:.*V.?i.?a.?g.?r.?a/ REJECT Header-Spamschutzregel JPBERLIN-58: Viagra-Keyword
+/^Subject:.*X.?a.?n.?a.?x/ REJECT Header-Spamschutzregel JPBERLIN-59: Xanax-Keyword
+/^Subject:.*Phentermine/ REJECT Header-Spamschutzregel JPBERLIN-60
+/^Subject:.*Die Sahne tropft heraus/ REJECT Header-Spamschutzregel JPBERLIN-61
+/^Subject:.* Rolex / REJECT Header-Spamschutzregel JPBERLIN-62
+/^Subject:.*Rechnung Online Monat November 2004/ REJECT Header-Spamschutzregel JPBERLIN-63 Trojaner-Alarm
+/^Subject:.*Replica Watch Models/ REJECT Header-Spamschutzregel JPBERLIN-64
+/^Subject:.*Sehr geehrter Postbankkunde/ REJECT Header-Spamschutzregel JPBERLIN-65
+/^Subject:.*AIR ANTALYA/ REJECT Header-Spamschutzregel JPBERLIN-66
+/^Subject:.*Search engines - submit/ REJECT Header-Spamschutzregel JPBERLIN-12
+/^Subject:.*Search engine traffic/ REJECT Header-Spamschutzregel JPBERLIN-13
+/^Subject: More efficient than via-gra/ REJECT Header-Spamschutzregel 22
+/^Subject: Mailadresse unbekannt/ REJECT Header-Spamschutzregel 27
+/^Subject:.*SARS: Viet Nam removed from list of affected countries.*/ REJECT Header-Spamschutzregel 29
+/^Subject:.*Wichtig !!! Die Telefonnummer die du haben wolltest/ REJECT Header-Spamschutzregel 31
+/^Subject:.*Weihnachtsbaeume ab EURO.*/ REJECT Header-Spamschutzregel 32
+/^Subject:.*Neue Version zum downloaden.*/ REJECT Header-Spamschutzregel 33
+/^Subject:.*Frants for.*/ REJECT Header-Spamschutzregel 34
+/^Subject:.*FREEE.*/ REJECT Header-Spamschutzregel 35
+/^Subject:.*Webdesign leicht gemacht.*/ REJECT Header-Spamschutzregel 36
+/^Subject:.*Check this Message Board Out.*/ REJECT Header-Spamschutzregel 37
+/^Subject: SAVE GERMANY VOTE STOIBER.*/ REJECT Header-Spamschutzregel 38
+
+Endif
+####################################
+
+
+
+#/^Return-Path: <MAILER-DAEMON>/ REJECT Header-Spamschutzregel 20
+/^Received:.*luftmensch.com/ REJECT Header-Spamschutzregel 28
+/^Delivered-To:.*jo@pcj.mlbc.test/ REJECT Header-Spamschutzregel
+/From:.*Mandy Tweed/ REJECT Header-Spamschutzregel 39
+/Received: from privat .*.aol.com/ REJECT Header-Spamschutzregel 40
+/Received:.*tpg_exsrvr.thepowellgroup.com/ REJECT Header-Spamschutzregel 41
+/Received: from mx?.eudoramail.com/ REJECT Header-Spamschutzregel 42
+/Flashmail\.com/ REJECT Header-Spamschutzregel 44
+
+
+
+#
+# Checks gesammelt aus dem Netz von
+# http://www.hispalinux.es/~data/postfix/
+#
+
+######################################
+If /^Subject:/i
+
+/^Subject: FW: Warm this world by truely Love$/ REJECT Header-Spamschutzregel 51
+/^Subject:.*Fwd:Peace BeTweeN AmeriCa and IsLaM!/ REJECT Header-Spamschutzregel 58
+/^Subject: ILOVEYOU/ REJECT Header-Spamschutzregel 60
+# Regel 61 rausgenommen -- zu allgemein. 20080128 / phei
+#/^Subject: (Re: )*Important Message From/ REJECT Header-Spamschutzregel 61
+/^Subject: (Re: )*BubbleBoy is back!/ REJECT Header-Spamschutzregel 62
+/^Subject: Accept Credit Cards/ REJECT Header-Spamschutzregel 63
+/^Subject: How Soon Are You Going To Retire\?/ REJECT Header-Spamschutzregel 64
+/^Subject: \[ADV:/ REJECT Header-Spamschutzregel 65
+/^Subject: ADV:/ REJECT Header-Spamschutzregel 66
+/^Subject: Snowhite and the Seven Dwarfs - The REAL story!/ REJECT Header-Spamschutzregel 67
+/^Subject: Are you losing sleep over debt\?/ REJECT Header-Spamschutzregel 68
+/^Subject: a stock that makes money/ REJECT Header-Spamschutzregel 69
+/^Subject: high earnings may soar/ REJECT Header-Spamschutzregel 70
+/^Subject: See the VIDEO Britney/ REJECT Header-Spamschutzregel 71
+/^Subject: FW: VIDEOS OF BRITNEY/ REJECT Header-Spamschutzregel 72
+/^Subject: STOLEN HARDCORE VIDEO/ REJECT Header-Spamschutzregel 73
+/^Subject: NEW CASH PROGRAM/ REJECT Header-Spamschutzregel 74
+/^Subject: Hot Celebs 100% Exposed!/ REJECT Header-Spamschutzregel 75
+/^Subject: Make It Happen/ REJECT Header-Spamschutzregel 76
+/^Subject: If you need extra money...read this!/ REJECT Header-Spamschutzregel 77
+/^Subject: Recieve A Free Quote/ REJECT Header-Spamschutzregel 78
+/^Subject: We Have Low Mortgage Rates!!!/ REJECT Header-Spamschutzregel 79
+/^Subject: Re: travel confirmation/ REJECT Header-Spamschutzregel 80
+/^Subject: Receive a FREE SAMPLE of Viagra for Women/ REJECT Header-Spamschutzregel 81
+/^Subject: DOUBLE YOUR BREAST SIZE! GUARANTEED/ REJECT Header-Spamschutzregel 82
+/^Subject: Ground Breaking Business "Starts Today"/ REJECT Header-Spamschutzregel 83
+/^Subject: AS SEEN ON T\.V/ REJECT Header-Spamschutzregel 84
+/^Subject: 99 Million Email Addresses - \$99/ REJECT Header-Spamschutzregel 85
+/^Subject: 50 Million Fresh Email Addresses/ REJECT Header-Spamschutzregel 87
+/^Subject: 200 Million Email Addresses - \$149/ REJECT Header-Spamschutzregel 88
+/^Subject: Get Viagra Online Now !!!/ REJECT Header-Spamschutzregel 89
+/^Subject: Boost Your Windows Reliability/ REJECT Header-Spamschutzregel 90
+/^Subject: I know what you've been doing/ REJECT Header-Spamschutzregel 91
+/^Subject: Hot Penny Stock Pick/ REJECT Header-Spamschutzregel 92
+/^Subject: Need a great deal on a home loan\?/ REJECT Header-Spamschutzregel 93
+/^Subject: I used to be in debt too!/ REJECT Header-Spamschutzregel 94
+/^Subject: Work less, make more/ REJECT Header-Spamschutzregel 95
+/^Subject: Drive Your Web Counter Ballistic/ REJECT Header-Spamschutzregel 96
+/^Subject: Re: have you considered doing this\?/ REJECT Header-Spamschutzregel 97
+/^Subject: Work from home and get paid!/ REJECT Header-Spamschutzregel 98
+/^Subject: Enter To Win One of 25 Dream Vacations!!/ REJECT Header-Spamschutzregel 99
+/^Subject: Do You Accept Credit Cards/ REJECT Header-Spamschutzregel 100
+/^Subject: Home Owners ONLY/ REJECT Header-Spamschutzregel 101
+/^Subject: Your Credit Info/ REJECT Header-Spamschutzregel 102
+/^Subject: Do you owe money\?/ REJECT Header-Spamschutzregel 103
+/^Subject: Need a Home Loan? We Can Help!!/ REJECT Header-Spamschutzregel 104
+/^Subject: stock alert/ REJECT Header-Spamschutzregel 105
+/^Subject: contact lenses/ REJECT Header-Spamschutzregel 106
+/^Subject: ENLARGE YOUR PACAKGE GUARANTEED/ REJECT Header-Spamschutzregel 107
+/^Subject: ENLARGE YOUR PACKAGE GUARANTEED/ REJECT Header-Spamschutzregel 108
+/^Subject: We purchase uncollected Judicial Judgments/ REJECT Header-Spamschutzregel 109
+/^Subject: Increase Your Gas Mileage by up to 27%!/ REJECT Header-Spamschutzregel 112
+/^Subject: Willow Flower Herb For Prostate Problems\./ REJECT Header-Spamschutzregel 113
+/^Subject: NEW Increase Your Gas Mileage by 27%/ REJECT Header-Spamschutzregel 114
+/^Subject: The easiest way to make money on the internet!/ REJECT Header-Spamschutzregel 115
+/^Subject: Re: think about this\.\.\./ REJECT Header-Spamschutzregel 116
+/^Subject: think about this\.\.\./ REJECT Header-Spamschutzregel 117
+/^Subject: At Last, Herbal V, the All Natural Alternative!/ REJECT Header-Spamschutzregel 119
+/^Subject: Make Money In Your Sleep! / REJECT Header-Spamschutzregel 120
+/^Subject: FREE Satellite TV System/ REJECT Header-Spamschutzregel 122
+/^Subject: About your site/ REJECT Header-Spamschutzregel 124
+/^Subject: No Deposit VISA or Master Card!/ REJECT Header-Spamschutzregel 126
+/^Subject: FREE Auto Insurance Quote!/ REJECT Header-Spamschutzregel 127
+/^Subject: Need money for college\?/ REJECT Header-Spamschutzregel 131
+/^Subject:(\s+\[[^]]*\])?\s+[-\.{<]*ADV(ertisement)?[-:\.>}\s]/ REJECT Header-Spamschutzregel 153
+#/^Subject:.*\s+ADV$/ REJECT Header-Spamschutzregel 154
+/^Subject: I viewed your site-/ REJECT Header-Spamschutzregel 155
+/^Subject:.*Millions?\s*(E?-?MAIL\s*)?ADDRESS/ REJECT Header-Spamschutzregel 156
+/^Subject:.*(are you (being investigated|in need of a lifestyle)|Free 1 Ounce Silver Coin|All foreign residents. Check out this offer|CAN YOU ADVERTISE TO OVER 20 MILLION E-MAIL ADDRESSES\??|DSL - FREE DSL Modem! FREE Install! NO Contract!|We want to give you a Brand New FREE Motorola Pager|FREE Motorola Pager|Cellphone Signal Booster|You('| ha)?ve qualified for)/ REJECT Header-Spamschutzregel 157
+# /^Subject:.*[ ._]{5,}[^0 ._]\d+$/ REJECT Header-Spamschutzregel 160
+# /^Subject:.*[ ._]{5,}\[[^ ]+\]$/ REJECT Header-Spamschutzregel 161
+/^Subject:.*\sTime[: ]+\d+:\d+:\d+ [AP]M\s*$/i REJECT Header-Spamschutzregel 162
+/^Subject: Snowhite and the Seven Dwarfs - The REAL story!/ REJECT Header-Spamschutzregel 177
+/^Subject: new photos from my party!/ REJECT Header-Spamschutzregel 180
+#/^Subject:.*=\?(euc-kr|ks_c_5601-1987)\?/ REJECT Header-Spamschutzregel 200
+/^Subject: Liebe freunde, es tropft wieder/ REJECT Header-Spamschutzregel 201
+/^Subject: The best gift a wife or girlfriend could ever ask for/ REJECT Header-Spamschutzregel 202
+/^Subject: Increase your drive, stamina, size and performance.. reach your potential!/ REJECT Header-Spamschutzregel 203
+/^Subject: Discover your true sexual potential/ REJECT Header-Spamschutzregel 204
+/^Subject: .*you could need it Pharamaceu tical/ REJECT Header-Spamschutzregel 205
+/^Subject: Nearly 65% of women claim they wish their lover was more adept.. let us help/ REJECT Header-Spamschutzregel 206
+/^Subject: Increased spending on homeland security has created incredible opportunity/ REJECT Header-Spamschutzregel 207
+/^Subject: The security explosion/ REJECT Header-Spamschutzregel 208
+/^Subject: Ermittlungsverfahren gegen Sie.*/ REJECT Header-Spamschutzregel 210
+/^Subject: Bekommen Sie Uhren.*/ REJECT Header-Spamschutzregel 211
+Endif
+#################################################
+
+
+/^To: <ABALTAS@europarl.eu.int>/ REJECT Header-Spamschutzregel 53
+/^To: ACERCAS@europarl.eu.int/ REJECT Header-Spamschutzregel 54
+/^To: infomail@recurrent.com/ REJECT Header-Spamschutzregel 57
+/^X-Spanska:/ REJECT Header-Spamschutzregel 59
+/^From steve-larson1@execs.com/ REJECT Header-Spamschutzregel 110
+/^From @execs.com*/ REJECT Header-Spamschutzregel 111
+/^From: enews@uscav.com/ REJECT Header-Spamschutzregel 118
+/weatherbug\.com/ REJECT Header-Spamschutzregel 123
+/virtumundo\.com/ REJECT Header-Spamschutzregel 125
+/thesexymessage\.com/ REJECT Header-Spamschutzregel 128
+/insideporn\.net/ REJECT Header-Spamschutzregel 129
+/shoplet\.com/ REJECT Header-Spamschutzregel 132
+/real-net\.net/ REJECT Header-Spamschutzregel 133
+/bizinfo/ REJECT Header-Spamschutzregel 134
+/servicenetbest\.com/ REJECT Header-Spamschutzregel 135
+/petter_zhang/ REJECT Header-Spamschutzregel 137
+/^(To|From|Cc|Reply-To):.*Investor Alert/ REJECT Header-Spamschutzregel 142
+/^(To|From|Cc|Reply-To):.*friend@(public.com|localhost.net)/ REJECT Header-Spamschutzregel 143
+/^(To|From|Cc|Reply-To):.*[ <]\d+@(onramp|prodigy|uu)\.net/ REJECT Header-Spamschutzregel 145
+/^(To|From|Cc|Reply-To):.*@funstuff2000.net/ REJECT Header-Spamschutzregel 146
+/^(To|From|Cc|Reply-To):.*(infowatch\.net|nakedmail\d?\.com)/ REJECT Header-Spamschutzregel 147
+/^(To|From|Cc|Reply-To):.*customer@aol/ REJECT Header-Spamschutzregel 148
+/^To: ListMembers@theneteffect/ REJECT Header-Spamschutzregel 149
+/^Reply-To:.*@(china\.com|rever-dreaming\.com|btamail\.net\.cn|amdpress\.com|nakedmail\d?\.com|big-salesfor\.you-now\.net)/ REJECT Header-Spamschutzregel 150
+
+# X-Bulkmail rausgenommen, da dies von UCI-Kinowelt benutzt wird :-(
+#/^X-(Advertisement|\d|UltraMail|Bulkmail): / REJECT Header-Spamschutzregel 166
+/^X-(Advertisement|\d|UltraMail): / REJECT Header-Spamschutzregel 166
+
+/^(Received|Message-Id|X-(Mailer|Sender)):.*\b(E-Broadcaster|Emailer Platinum|eMarksman|Extractor|e-Merge|from stealth[^.]|Global Messenger|GroupMaster|Mailcast|MailKing|Match10|MassE-Mail|massmail\.pl|News Breaker|Powermailer|Quick Shot|Ready Aim Fire|WindoZ|WorldMerge|Yourdora)\b/ REJECT Header-Spamschutzregel 167
+/^X-Mailer:.*\b(Aristotle|Avalanche|Blaster|Bomber|DejaVu|eMerge|Extractor|UltraMail|Sonic|Floodgate|GeoList|Mach10|MegaPro|Aureate|MultiMailer|Bluecom|Achi-Kochi Mail|Direct Email|Andrew's SuperCool Blastoise|MailerGear|Advanced Mass Sender|SpireMail|MailWorkZ|UltimDBMail|Mabry)\b/ REJECT Header-Spamschutzregel 168
+/^X-EM-(Version|Registration):/ WARN TEST DER X-EM-Header
+/^X-AD2000-(Serial|Register):/ REJECT Header-Spamschutzregel 170
+/^X-Server: Advanced Direct Remailer/ REJECT Header-Spamschutzregel 171
+# spamware mistake. real header is "Comments:"
+/^Comment: Authenticated sender is/ REJECT Header-Spamschutzregel 174
+# viruses
+/^(To|From|Cc|Reply-To):.*@sexyfun.net/ REJECT Header-Spamschutzregel 178
+/^Content-Disposition: Multipart message/i REJECT Header-Spamschutzregel 179
+# sendmail Received: header overflow
+/^Received:.*\.{50,}/ REJECT Header-Spamschutzregel 183
+# Date headers do not end in AM or PM.
+/^Date:.* [AP]M/i REJECT Header-Spamschutzregel 193
+# invalid timezone in Date header
+/^Date:.*[+-](1[4-9]|2\d)\d\d$/ REJECT Header-Spamschutzregel 195
+/^From:.*icyhot.bakas24.de/ REJECT Header-Spamschutzregel 209
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
-daemon_directory = //usr/lib64/postfix
+daemon_directory = /usr/lib64/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.8.7/html
+html_directory = /usr/share/doc/postfix-2.8.9/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.8.7/readme
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
home_mailbox = .maildir/
#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
alias_maps = hash:/etc/postfix/maps/aliases
mydestination = $myhostname, $mydomain, hash:/etc/postfix/maps/mydomains
mydomain = brehm-online.com
myhostname = helga.brehm-online.com
-mynetworks = 127.0.0.0/8 85.214.134.152/32 [::1]/128 [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]/128
+mynetworks = 127.0.0.0/8 85.214.134.152/32 85.214.109.1/32 [::1]/128 [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]/128
mynetworks_style = host
myorigin = $mydomain
#recipient_bcc_maps = mysql:/etc/postfix/mysql-recipient_bcc.cf
+++ /dev/null
-#
-# Postfix master process configuration file. For details on the format
-# of the file, see the master(5) manual page (command: "man 5 master").
-#
-# Do not forget to execute "postfix reload" after editing this file.
-#
-# ==========================================================================
-# service type private unpriv chroot wakeup maxproc command + args
-# (yes) (yes) (yes) (never) (100)
-# ==========================================================================
-smtp inet n - n - - smtpd
-#submission inet n - n - - smtpd
-# -o smtpd_tls_security_level=encrypt
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
-#smtps inet n - n - - smtpd
-# -o smtpd_tls_wrappermode=yes
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
-#628 inet n - n - - qmqpd
-pickup fifo n - n 60 1 pickup
-cleanup unix n - n - 0 cleanup
-qmgr fifo n - n 300 1 qmgr
-#qmgr fifo n - n 300 1 oqmgr
-tlsmgr unix - - n 1000? 1 tlsmgr
-rewrite unix - - n - - trivial-rewrite
-bounce unix - - n - 0 bounce
-defer unix - - n - 0 bounce
-trace unix - - n - 0 bounce
-verify unix - - n - 1 verify
-flush unix n - n 1000? 0 flush
-proxymap unix - - n - - proxymap
-proxywrite unix - - n - 1 proxymap
-smtp unix - - n - - smtp
-# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
-relay unix - - n - - smtp
- -o smtp_fallback_relay=
-# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
-showq unix n - n - - showq
-error unix - - n - - error
-retry unix - - n - - error
-discard unix - - n - - discard
-local unix - n n - - local
-virtual unix - n n - - virtual
-lmtp unix - - n - - lmtp
-anvil unix - - n - 1 anvil
-scache unix - - n - 1 scache
-#
-# ====================================================================
-# Interfaces to non-Postfix software. Be sure to examine the manual
-# pages of the non-Postfix software to find out what options it wants.
-#
-# Many of the following services use the Postfix pipe(8) delivery
-# agent. See the pipe(8) man page for information about ${recipient}
-# and other message envelope options.
-# ====================================================================
-#
-# maildrop. See the Postfix MAILDROP_README file for details.
-# Also specify in main.cf: maildrop_destination_recipient_limit=1
-#
-#maildrop unix - n n - - pipe
-# flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
-#
-# ====================================================================
-#
-# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
-#
-# Specify in cyrus.conf:
-# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
-#
-# Specify in main.cf one or more of the following:
-# mailbox_transport = lmtp:inet:localhost
-# virtual_transport = lmtp:inet:localhost
-#
-# ====================================================================
-#
-# Cyrus 2.1.5 (Amos Gouaux)
-# Also specify in main.cf: cyrus_destination_recipient_limit=1
-#
-#cyrus unix - n n - - pipe
-# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
-#
-# ====================================================================
-#
-# Old example of delivery via Cyrus.
-#
-#old-cyrus unix - n n - - pipe
-# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
-#
-# ====================================================================
-#
-# See the Postfix UUCP_README file for configuration details.
-#
-#uucp unix - n n - - pipe
-# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
-#
-# ====================================================================
-#
-# Other external delivery methods.
-#
-#ifmail unix - n n - - pipe
-# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
-#
-#bsmtp unix - n n - - pipe
-# flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
-#
-#scalemail-backend unix - n n - 2 pipe
-# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
-# ${nexthop} ${user} ${extension}
-#
-#mailman unix - n n - - pipe
-# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
-# ${nexthop} ${user}
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.9/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.9/readme
+home_mailbox = .maildir/
--- /dev/null
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - n - - smtpd
+#smtp inet n - n - 1 postscreen
+#smtpd pass - - n - - smtpd
+#dnsblog unix - - n - 0 dnsblog
+#tlsproxy unix - - n - 0 tlsproxy
+#submission inet n - n - - smtpd
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#smtps inet n - n - - smtpd
+# -o smtpd_tls_wrappermode=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#628 inet n - n - - qmqpd
+pickup fifo n - n 60 1 pickup
+cleanup unix n - n - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - n 1000? 1 tlsmgr
+rewrite unix - - n - - trivial-rewrite
+bounce unix - - n - 0 bounce
+defer unix - - n - 0 bounce
+trace unix - - n - 0 bounce
+verify unix - - n - 1 verify
+flush unix n - n 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - n - - smtp
+# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
+relay unix - - n - - smtp
+ -o smtp_fallback_relay=
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - n - - showq
+error unix - - n - - error
+retry unix - - n - - error
+discard unix - - n - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - n - - lmtp
+anvil unix - - n - 1 anvil
+scache unix - - n - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+#maildrop unix - n n - - pipe
+# flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+#uucp unix - n n - - pipe
+# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# ====================================================================
+#
+# Other external delivery methods.
+#
+#ifmail unix - n n - - pipe
+# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+#
+#bsmtp unix - n n - - pipe
+# flags=Fq. user=bsmtp argv=/usr/sbin/bsmtp -f $sender $nexthop $recipient
+#
+#scalemail-backend unix - n n - 2 pipe
+# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
+# ${nexthop} ${user} ${extension}
+#
+#mailman unix - n n - - pipe
+# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+# ${nexthop} ${user}
# Setup a bland default prompt. Since this prompt should be useable
# on color and non-color terminals, as well as shells that don't
# understand sequences such as \h, don't put anything special in it.
- PS1="${USER:-$(type whoami >/dev/null && whoami)}@$(type uname >/dev/null && uname -n) \$ "
+ PS1="${USER:-$(whoami 2>/dev/null)}@$(uname -n 2>/dev/null) \$ "
fi
for sh in /etc/profile.d/*.sh ; do
+ #echo "Sourcing $sh ..."
[ -r "$sh" ] && . "$sh"
done
unset sh
export GSETTINGS_BACKEND='gconf'
export GUILE_LOAD_PATH='/usr/share/guile/1.8'
export HG='/usr/bin/hg'
-export INFOPATH='/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info'
+export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/info'
export LESS='-R -M --shift 5'
export LESSOPEN='|lesspipe %s'
-export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/opt/cuda/man'
+export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.5.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.21.1/man:/etc/java-config/system-vm/man/:/usr/lib64/php5.3/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.1/man/'
export PAGER='/usr/bin/less'
-export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin:/opt/cuda/bin'
-export PYTHONDOCS='/usr/share/doc/python-docs-2.7.1/html/library'
+export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin'
export PYTHONDOCS_2_7='/usr/share/doc/python-docs-2.7.2/html/library'
export PYTHONDOCS_3_2='/usr/share/doc/python-docs-3.2.2/html/library'
-export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin:/opt/cuda/bin'
+export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/lib64/subversion/bin'
export XDG_CONFIG_DIRS='/etc/xdg'
export XDG_DATA_DIRS='/usr/local/share:/usr/share'
+++ /dev/null
-#
-# This is a sample groupadmins file (/etc/quotagrpadmins)
-#
-# Comments begin with hash in the beginning of the line
-
-# In this file you specify users responsible for space used by the group
-users: root
-mygroup: chief
+++ /dev/null
-#
-# This is sample quotatab (/etc/quotatab)
-# Here you can specify description of each device for user
-#
-# Comments begin with hash in the beginning of the line
-
-# Example of description
-/dev/loop0: This is loopback device
-/dev/hda4: Your home directory
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.09.58; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.19.01.53; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@############################################################################
-# REOBack - files.conf
-# $Id: files.conf,v 1.2 2010/08/05 10:51:53 root Exp $
-############################################################################
-#
-# REOBack Simple Backup Solution
-# http://sourceforge.net/projects/reoback/
-#
-# Copyright (c) 2001 Randy Oyarzabal (techno91@@users.sourceforge.net)
-#
-# Other developers and contributors:
-# Richard Griswold
-# Nate Steffenhagen (frankspikoli@@users.sourceforge.net)
-############################################################################
-#
-# This is a list of random files or directories that need to be
-# archived as one big tar file. These files will also be selectively
-# picked depending on a FULL or incremental backup.
-
-# Comments must start with a "#" as shown
-############################################################################
-
-# The following is an example with comments, below it is again without
-
-# 'File:' followed by the name of the tar file that will be created
-# Note that we don't include a path as that is added in the settings.conf
-#File: TestFile1
-
-# Simply list all directories to be recursively backed up (1 per line)
-#/home/sforge
-
-# 'Skip:' followed by any subdirectories you want not to be included
-# from the above backup directory
-#Skip: /home/sforge/backups
-#Skip: /home/sforge/reoback/data
-
-# Note: You can use Perl regular expressions (wild cards) for Skip: For
-# example, to skip all files and directories in your home directory that
-# start with a dot, you can use:
-#
-# Skip: /home/myself/\..*
-#
-# Wondering what '\..*' does? The leading backslash, '/', tells REOBack
-# (actually Perl) to treat the next dot, '.', as a literal dot. The
-# third dot tells Perl to match any character, and the asterisk, '*',
-# tells Perl to perform the match zero or more times.
-
-# For files to be completely recursively backed up, don't use the 'Skip'
-# option. Simple, huh?
-#/etc
-#/home/frank
-
-# Note we are starting a new backup file, but don't need to mark the close
-# of the previous one
-#File: TestFile2
-#/var/www/html
-
-# Note we can also include seperate files, not just directories
-#/var/www/docs/hugedoc.txt
-
-# Now, here is the full contents without the comments
-
-#File: TestFile1
-#/home/sforge
-#Skip: /home/sforge/backups
-#Skip: /home/sforge/reoback/data
-#/etc
-#/home/frank
-
-#File: TestFile2
-#/var/www/html
-#/var/www/docs/hugedoc.txt
-
-# That's it, no need to mark the close of the file either.
-# Be sure to remove, or comment out all these sample lines before running
-
-#----------
-File: Etc
-/etc
-
-#----------
-File: Bind
-/var/bind
-
-#----------
-File: IpTables
-/var/lib/ip6tables
-/var/lib/iptables
-
-#----------
-File: OpenLdap
-/var/lib/openldap-data
-/var/lib/openldap-data-empty.tgz
-/var/lib/openldap-data-initial.tgz
-
-#----------
-File: Portage
-/var/lib/portage
-
-#----------
-File: Root
-/root
-Skip: /root/tmp
-
-#----------
-File: SvnPriv
-/var/lib/svn-repos-priv
-
-#----------
-File: SvnPub
-/var/lib/svn-repos
-
-#----------
-File: VarLog
-/var/log
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d3 1
-a3 1
-# $Id: files.conf,v 1.9 2002/03/23 15:24:35 techno91 Exp $
-d27 1
-a27 1
-File: TestFile1
-d30 1
-a30 1
-/home/sforge
-d34 2
-a35 2
-Skip: /home/sforge/backups
-Skip: /home/sforge/reoback/data
-d50 2
-a51 2
-/etc
-/home/frank
-d55 2
-a56 2
-File: TestFile2
-/var/www/html
-d59 1
-a59 1
-/var/www/docs/hugedoc.txt
-d63 10
-a72 10
-File: TestFile1
-/home/sforge
-Skip: /home/sforge/backups
-Skip: /home/sforge/reoback/data
-/etc
-/home/frank
-
-File: TestFile2
-/var/www/html
-/var/www/docs/hugedoc.txt
-d76 40
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2010.12.02.12.09.58; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.12.01.19.01.53; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@############################################################################
-# REOBack - settings.conf
-# $Id: settings.conf,v 1.1 2010/08/05 10:28:25 root Exp $
-############################################################################
-#
-# REOBack Simple Backup Solution
-# http://sourceforge.net/projects/reoback/
-#
-# Copyright (c) 2001 Randy Oyarzabal (techno91@@users.sourceforge.net)
-#
-# Other developers and contributors:
-# Richard Griswold
-# Nate Steffenhagen (frankspikoli@@users.sourceforge.net)
-#
-############################################################################
-#
-# This is the configuration file for REOBack. Note that the default
-# configuration file is "settings.cfg". However, you can create your own
-# configuration file and pass it as a parameter to the backup program.
-# i.e. "./reoback.pl <configfile>"
-
-# Used only as an identifier for this backup. Normally the hostname.
-host = Helga
-
-# This is the number of days you want to keep backups. Note that the
-# actual number of archives kept is "backupdays" times 2. That way, when
-# it comes time for auto deletion, you always have a history of
-# "backupdays" worth of information.
-backupdays = 7
-
-# Definitions of files/directories to backup. See README for format of
-# this file.
-files = /etc/reoback/files.conf
-
-# Directory to store temporary files generated by REOBack.
-tmpdir = /var/lib/reoback/tmp/
-
-# Directory to store data files generated by REOBack. Files created
-# here are files used to keep track of FULL/INCREMENTAL backups.
-datadir = /var/lib/reoback/data/
-
-# Location of where to keep local backups. Also use as a temporary
-# storage of archives for transfer. Keep trailing slash!
-#localbackup = /var/lib/reoback/backups/
-localbackup = /var/backup/reoback/
-
-# 1 = Keep local backups, 0 = Do not keep local backups
-keeplocalcopy = 1
-
-# 1 = Transfer to remote location, 0 = Do not transfer
-remotebackup = 1
-
-# Type of remote backup. FTP or NFS
-rbackuptype = FTP
-
-# Only needed if above is set to NFS. Keep trailing slash!
-localmount = /mnt/server/
-
-# Required if "remotebackup" is set.
-remotehost = backup.serverkompetenz.de
-
-# Path to keep backups on remote host. Keep trailing slash!
-remotepath = /reoback/
-
-#######################################################
-# REQUIRED IF TYPE OR REMOTE BACKUP IS FTP.
-#######
-
-# Remote user on remote host.
-ftpuser = b082473
-
-# Password for remote user.
-ftppasswd = 53rVer
-######################################################
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d3 1
-a3 1
-# $Id: settings.conf,v 1.8 2002/03/23 21:49:50 techno91 Exp $
-d23 1
-a23 1
-host = UNKNOWN
-d44 2
-a45 1
-localbackup = /var/lib/reoback/backups/
-d51 1
-a51 1
-remotebackup = 0
-d60 1
-a60 1
-remotehost = HOSTNAMEHERE
-d63 1
-a63 1
-remotepath = /path here/
-d70 1
-a70 1
-ftpuser = userhere
-d73 1
-a73 1
-ftppasswd = passwordhere
-@
--- /dev/null
+############################################################################
+# REOBack - files.conf
+# $Id: files.conf,v 1.9 2002/03/23 15:24:35 techno91 Exp $
+############################################################################
+#
+# REOBack Simple Backup Solution
+# http://sourceforge.net/projects/reoback/
+#
+# Copyright (c) 2001 Randy Oyarzabal (techno91@users.sourceforge.net)
+#
+# Other developers and contributors:
+# Richard Griswold
+# Nate Steffenhagen (frankspikoli@users.sourceforge.net)
+############################################################################
+#
+# This is a list of random files or directories that need to be
+# archived as one big tar file. These files will also be selectively
+# picked depending on a FULL or incremental backup.
+
+# Comments must start with a "#" as shown
+############################################################################
+
+# The following is an example with comments, below it is again without
+
+# 'File:' followed by the name of the tar file that will be created
+# Note that we don't include a path as that is added in the settings.conf
+File: TestFile1
+
+# Simply list all directories to be recursively backed up (1 per line)
+/home/sforge
+
+# 'Skip:' followed by any subdirectories you want not to be included
+# from the above backup directory
+Skip: /home/sforge/backups
+Skip: /home/sforge/reoback/data
+
+# Note: You can use Perl regular expressions (wild cards) for Skip: For
+# example, to skip all files and directories in your home directory that
+# start with a dot, you can use:
+#
+# Skip: /home/myself/\..*
+#
+# Wondering what '\..*' does? The leading backslash, '/', tells REOBack
+# (actually Perl) to treat the next dot, '.', as a literal dot. The
+# third dot tells Perl to match any character, and the asterisk, '*',
+# tells Perl to perform the match zero or more times.
+
+# For files to be completely recursively backed up, don't use the 'Skip'
+# option. Simple, huh?
+/etc
+/home/frank
+
+# Note we are starting a new backup file, but don't need to mark the close
+# of the previous one
+File: TestFile2
+/var/www/html
+
+# Note we can also include seperate files, not just directories
+/var/www/docs/hugedoc.txt
+
+# Now, here is the full contents without the comments
+
+File: TestFile1
+/home/sforge
+Skip: /home/sforge/backups
+Skip: /home/sforge/reoback/data
+/etc
+/home/frank
+
+File: TestFile2
+/var/www/html
+/var/www/docs/hugedoc.txt
+
+# That's it, no need to mark the close of the file either.
+# Be sure to remove, or comment out all these sample lines before running
--- /dev/null
+############################################################################
+# REOBack - settings.conf
+# $Id: settings.conf,v 1.8 2002/03/23 21:49:50 techno91 Exp $
+############################################################################
+#
+# REOBack Simple Backup Solution
+# http://sourceforge.net/projects/reoback/
+#
+# Copyright (c) 2001 Randy Oyarzabal (techno91@users.sourceforge.net)
+#
+# Other developers and contributors:
+# Richard Griswold
+# Nate Steffenhagen (frankspikoli@users.sourceforge.net)
+#
+############################################################################
+#
+# This is the configuration file for REOBack. Note that the default
+# configuration file is "settings.cfg". However, you can create your own
+# configuration file and pass it as a parameter to the backup program.
+# i.e. "./reoback.pl <configfile>"
+
+# Used only as an identifier for this backup. Normally the hostname.
+host = UNKNOWN
+
+# This is the number of days you want to keep backups. Note that the
+# actual number of archives kept is "backupdays" times 2. That way, when
+# it comes time for auto deletion, you always have a history of
+# "backupdays" worth of information.
+backupdays = 7
+
+# Definitions of files/directories to backup. See README for format of
+# this file.
+files = /etc/reoback/files.conf
+
+# Directory to store temporary files generated by REOBack.
+tmpdir = /var/lib/reoback/tmp/
+
+# Directory to store data files generated by REOBack. Files created
+# here are files used to keep track of FULL/INCREMENTAL backups.
+datadir = /var/lib/reoback/data/
+
+# Location of where to keep local backups. Also use as a temporary
+# storage of archives for transfer. Keep trailing slash!
+localbackup = /var/lib/reoback/backups/
+
+# 1 = Keep local backups, 0 = Do not keep local backups
+keeplocalcopy = 1
+
+# 1 = Transfer to remote location, 0 = Do not transfer
+remotebackup = 0
+
+# Type of remote backup. FTP or NFS
+rbackuptype = FTP
+
+# Only needed if above is set to NFS. Keep trailing slash!
+localmount = /mnt/server/
+
+# Required if "remotebackup" is set.
+remotehost = HOSTNAMEHERE
+
+# Path to keep backups on remote host. Keep trailing slash!
+remotepath = /path here/
+
+#######################################################
+# REQUIRED IF TYPE OR REMOTE BACKUP IS FTP.
+#######
+
+# Remote user on remote host.
+ftpuser = userhere
+
+# Password for remote user.
+ftppasswd = passwordhere
+######################################################
#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...
#====== ======= =============== =============== ===============================
+create dns_resolver * * /sbin/key.dns_resolver %k
create user debug:* negate /bin/keyctl negate %k 30 %S
+create user debug:* rejected /bin/keyctl reject %k 30 %c %S
+create user debug:* expired /bin/keyctl reject %k 30 %c %S
+create user debug:* revoked /bin/keyctl reject %k 30 %c %S
create user debug:loop:* * |/bin/cat
create user debug:* * /usr/share/keyutils/request-key-debug.sh %k %d %c %S
negate * * * /bin/keyctl negate %k 30 %S
-SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.11.1"
+SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.11.3"
+++ /dev/null
-/etc/init.d/consolefont
\ No newline at end of file
--- /dev/null
+/etc/init.d/mdraid
\ No newline at end of file
+++ /dev/null
-/etc/init.d/apache2
\ No newline at end of file
+++ /dev/null
-/etc/init.d/openvpn
\ No newline at end of file
+++ /dev/null
-/etc/init.d/quota
\ No newline at end of file
+++ /dev/null
-/etc/init.d/local
\ No newline at end of file
+++ /dev/null
-head 1.3;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.3
-date 2011.01.31.13.00.22; author root; state Exp;
-branches;
-next 1.2;
-
-1.2
-date 2010.06.24.08.03.50; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.05.26.13.02.47; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initial
-@
-
-
-1.3
-log
-@Checked in.
-@
-text
-@# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.2 2004/07/18 03:26:56 dragonheart Exp $
-#pwcheck_method:pam
-pwcheck_method: saslauthd
-mech_list: plain login
-log_level: 3
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@d1 1
-a1 2
-# $Original-Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.2 2004/07/18 03:26:56 dragonheart Exp $
-# $Header: /etc/sasl2/smtpd.conf,v 1.1 2010/05/26 13:02:47 root Exp $
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d1 6
-a6 2
-# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.2 2004/07/18 03:26:56 dragonheart Exp $
-pwcheck_method:pam
-@
CATALOG "/etc/sgml/sgml-ent.cat"
CATALOG "/etc/sgml/sgml-docbook.cat"
-CATALOG "/etc/sgml/xml-docbook-4.3.cat"
+CATALOG "/etc/sgml/openjade-1.3.2.cat"
+CATALOG "/etc/sgml/xml-docbook-4.2.cat"
+CATALOG "/etc/sgml/linuxdoc.cat"
CATALOG "/etc/sgml/sgml-docbook-3.0.cat"
CATALOG "/etc/sgml/dsssl-docbook-stylesheets.cat"
CATALOG "/etc/sgml/xml-docbook-4.1.2.cat"
-CATALOG "/etc/sgml/xml-docbook-4.2.cat"
+CATALOG "/etc/sgml/xml-docbook-4.3.cat"
CATALOG "/etc/sgml/xml-docbook-4.4.cat"
CATALOG "/etc/sgml/xml-docbook-4.5.cat"
-CATALOG "/etc/sgml/openjade-1.3.2.cat"
-CATALOG "/etc/sgml/linuxdoc.cat"
CATALOG "/etc/sgml/sgml-ent.cat"
-CATALOG "/etc/sgml/dsssl-docbook-stylesheets.cat"
CATALOG "/etc/sgml/openjade-1.3.2.cat"
+CATALOG "/etc/sgml/dsssl-docbook-stylesheets.cat"
-root:$6$0briKxmJ$IhtNDwr2yTK6nImlWue6P.NqFEURw9rOYmTXImRGR6EyBsls.yh.CIay2UU01fJ18NGmnNw7NkccUoVNlSgvL1:14942:0:::::
+root:$6$mKNe/pgL$GyQwqpwoFWYyljDdfmmsQKwZv2nut/dPvHj6SexfB1WYQHobBIRUVz2KkgT9JrhbDGAxyPKDyp2wnKZ.hhAq10:15544:0:::::
bin:*:9797:0:::::
daemon:*:9797:0:::::
adm:*:9797:0:::::
sync:*:9797:0:::::
shutdown:*:9797:0:::::
halt:*:9797:0:::::
-mail:*:9797:0:::::
+mail:!:15544::::::
news:*:9797:0:::::
uucp:*:9797:0:::::
operator:*:9797:0:::::
-man:*:9797:0:::::
-postmaster:*:9797:0:::::
-cron:!:14942::::::
+man:!:15512::::::
+postmaster:!:15544::::::
+cron:!:15544::::::
ftp:!:14944::::::
-sshd:!:14931::::::
+sshd:!:15512::::::
at:!:14942::::::
games:!:14755:0:99999:7:::
-named:!:14942::::::
-mysql:!:14943::::::
-apache:!:14944::::::
-ulogd:!:14942::::::
+named:!:15544::::::
+mysql:!:15544::::::
+apache:!:15544::::::
+messagebus:!:15544::::::
tcpdump:!:14942::::::
-messagebus:!:14943::::::
nagios:!:14944::::::
teamspeak3:!:14944::::::
polw:!:14944::::::
clamav:!:14944::::::
proftpd:!:14755:0:99999:7:::
rpc:!:14943::::::
-ntp:!:14942::::::
-postfix:!:14944::::::
+openvpn:!:15353::::::
+git:!:15393::::::
+ntp:!:15544::::::
+postfix:!:15544::::::
smmsp:!:14944::::::
portage:!:14944::::::
-ldap:!:14943::::::
+ldap:!:15544::::::
nobody:*:9797:0:::::
taurec:$1$aIByn.zw$HuqtNPuXReU4CqFQ21D0m1:14754:0:99999:7:::
morph:$1$VXZ6JKs.$5BFb1vxIPcpV8qvfGU9721:14756:0:99999:7:::
+minecraft:!:15220:0:99999:7:::
patrick:$6$cayHKFTo$y3plIUQem6gONYo/D.VqfmcUJRgJ08lxWKzr.Q2NYw9P6BWOGLFgNi6HyWQ8sCjR9Ky7cWvBULtyxJG4xq2Bq1:14756:0:99999:7:::
vivi:$6$XgM4lbim$X2/XVS1Ymb1g0jDaoEFXaBvBRGpTFEk/PwZabvj1f2fRClMCJi4wDW1yOE2ScY6DBwmk9rHfykwI2u5WFgMe..:14756:0:99999:7:::
frank:$6$DFnYHGpc$8YQInxXqQjHzWX/1m3xCeK8Myr1t4NoehN.HYeSrdVQU6IAr7BTjgn4yex.eTTSWysqnfGQxXe5yE.P4aIn8p.:14758:0:99999:7:::
alfred:$6$7QGTopxZ$8cZaNAdFh9HPzgmo2J1klt1pXKacybRWfp3BnTY3q8ufnp8lNYFEdstvxgHD9iqSL8FpvrsGeC3V3BXhgzZO/.:14756:0:99999:7:::
steffen:$6$hjuxkJql$9/ANdpksdci1A40kjix8xMXEnrhCeGlfGxHxsWHADY44Xe.NY0sahgAzIAhTtX5/gIaCoTU37z2QbHCoBPy5k0:14756:0:99999:7:::
heiko:$1$OcX7G9Sq$YjjhAKtIp7UyxeZuHysq7/:14756:0:99999:7:::
-minecraft:!:15220:0:99999:7:::
-openvpn:!:15353::::::
-git:!:15393::::::
+ulogd:!:15545::::::
-/etc/mail/spamassassin
\ No newline at end of file
+mail/spamassassin
\ No newline at end of file
# Host *
# ForwardAgent no
- ForwardAgent yes
+ForwardAgent yes
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
+#LogLevel DEBUG
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
-PermitRootLogin no
+PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
# no default banner path
#Banner none
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExGzAZ
BgNVBAoTEkFwYWNoZSBIVFRQIFNlcnZlcjEiMCAGA1UECxMZRm9yIFRlc3Rpbmcg
UHVycG9zZXMgT25seTEVMBMGA1UEAxMMbG9jYWxob3N0IENBMR0wGwYJKoZIhvcN
-AQkBFg5yb290QGxvY2FsaG9zdDAeFw0xMDA1MjYwMjIxMjlaFw0xMjA1MjUwMjIx
-MjlaMIGuMQswCQYDVQQGEwJVUzETMBEGA1UECBMKQ2FsaWZvcm5pYTEWMBQGA1UE
+AQkBFg5yb290QGxvY2FsaG9zdDAeFw0xMjA3MjMxNTQ5MDVaFw0xNDA3MjMxNTQ5
+MDVaMIGuMQswCQYDVQQGEwJVUzETMBEGA1UECBMKQ2FsaWZvcm5pYTEWMBQGA1UE
BxMNU2FudGEgQmFyYmFyYTEbMBkGA1UEChMSQXBhY2hlIEhUVFAgU2VydmVyMSIw
IAYDVQQLExlGb3IgVGVzdGluZyBQdXJwb3NlcyBPbmx5MRIwEAYDVQQDEwlsb2Nh
bGhvc3QxHTAbBgkqhkiG9w0BCQEWDnJvb3RAbG9jYWxob3N0MIGfMA0GCSqGSIb3
-DQEBAQUAA4GNADCBiQKBgQC+dlAC+rhVn9yXgDtS69cbVliS6wGgsEkUtJ7WRXxx
-NQFIeefJ+H6752z49SLx5+6UWPYPs0/ha/KSRn+BP/rot93JO1BSlOSgwp6w9Nj9
-O0QVV5LcwrbJOSCJsjJaER9YHAffbCpBAexv0iD5wX/b1V/HrZ7nv6MBbJayCWHu
-nQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAJFuBY/r4J+Mva0g7fnZotW3GLGmZTqu
-NVUnqTPctmYl0gjhmKExjKgYvwOcZblY7TYcgnW4YUzukWwrMgOe4uPIPmmIhmkZ
-RGyb1cojRNV9oTE8VpSTndj/oq6qoyXDHfor5t4ukrbYkylekpleyw10l8LTBm+E
-EYDtgPM/1kLB
+DQEBAQUAA4GNADCBiQKBgQDWLZSVeCaCRJJrecGt99nVKPtZJLQAo0D/JiQ7PwO+
+6wgx8dTL6eJ1Sum6ry0iA/cLVwm2F8Qf2UGGn/TsOAAX/UwN02EJ4xtMzB8J9YGF
+UWyx/uJ36ez1UA0JKBbK7NbkXAWpekt0be5O0oS30yrYKqV6FSX2uiNMG5g4d5yX
+RQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAKVumP/K/0dGcfm3uj43TPXhUhN8yf5M
+bqHUyQj5Gturv1kE2RviWDuSwrEyRkGSNJGfjRtqMzYgznJ90gj2sSAXoIQPONSN
+tHXbHaXFZADIZxy09DT5WtAwtLTu+TNugljnsgfk0OMnn4fpejKvuYkgVK2nzcW+
+7BXbrTnfTiBF
-----END CERTIFICATE-----
MRYwFAYDVQQHEw1TYW50YSBCYXJiYXJhMRswGQYDVQQKExJBcGFjaGUgSFRUUCBT
ZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0aW5nIFB1cnBvc2VzIE9ubHkxEjAQBgNV
BAMTCWxvY2FsaG9zdDEdMBsGCSqGSIb3DQEJARYOcm9vdEBsb2NhbGhvc3QwgZ8w
-DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAL52UAL6uFWf3JeAO1Lr1xtWWJLrAaCw
-SRS0ntZFfHE1AUh558n4frvnbPj1IvHn7pRY9g+zT+Fr8pJGf4E/+ui33ck7UFKU
-5KDCnrD02P07RBVXktzCtsk5IImyMloRH1gcB99sKkEB7G/SIPnBf9vVX8etnue/
-owFslrIJYe6dAgMBAAGgADANBgkqhkiG9w0BAQUFAAOBgQCX36zOqG/zeCbKCcD2
-WBC5rlCXtrT/oZxs3p5divRkfWPakeHjkUFJ3B0aempUAravx+bG/mnzDGA8VFpT
-Mm2I8M98eAf7QmXpsP0Y5uKF68EVjsmvF+KgNGwh8dmpqt1ZgOtm5lBIOCCjjaUI
-yEuxcY+sDP8rpFxVk3U73hjYJg==
+DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANYtlJV4JoJEkmt5wa332dUo+1kktACj
+QP8mJDs/A77rCDHx1Mvp4nVK6bqvLSID9wtXCbYXxB/ZQYaf9Ow4ABf9TA3TYQnj
+G0zMHwn1gYVRbLH+4nfp7PVQDQkoFsrs1uRcBal6S3Rt7k7ShLfTKtgqpXoVJfa6
+I0wbmDh3nJdFAgMBAAGgADANBgkqhkiG9w0BAQUFAAOBgQBX6mMv16+ENHT4mNbZ
+0wdYEWUOGoaUH3jxSIseM5rL2bLLahvwhfGP+0oYNCXugWEtG8fcacw4sBUgqpOU
+FnB2GJEQHzm+BZQIhgIjw6t+6u4LjwyHuu/SdM6V/DFIvoZNn7c8PklCUJHIhsqZ
+1RyT71kvlAse437PA9kd7CFIOg==
-----END CERTIFICATE REQUEST-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQC+dlAC+rhVn9yXgDtS69cbVliS6wGgsEkUtJ7WRXxxNQFIeefJ
-+H6752z49SLx5+6UWPYPs0/ha/KSRn+BP/rot93JO1BSlOSgwp6w9Nj9O0QVV5Lc
-wrbJOSCJsjJaER9YHAffbCpBAexv0iD5wX/b1V/HrZ7nv6MBbJayCWHunQIDAQAB
-AoGBAIAkX86xWuYY6TRxDPjMPexhmrQ2MuEm2fR5VUh6dbBA5j0Z763+Z14K5VFW
-tI0m62iZtet4S+0xUIHDtrOCFU/mYXS95ynGh4zQFWyeDv9X8s1BIvjl9mbYrWbT
-eIp+uqblmgybkAPnBgJ3WRiDUpnoJaoYsncvIlEuhuOiY7ftAkEA5FRQJ/+dioSL
-KMtABp69EvdOJreaVMjYkChksiXDb/tHpZRco3xu7ob+cfDyZkZ87cHDFHlfWLNO
-l0z47tiO+wJBANWLNU0Mvrz5j8ba7rf3vdgVqVHeGS9COzyK4VPGKbQFVfa6MNjr
-mT3SEBQFvUJGg5OLWzniwn4X2zDhsRt4JUcCQQDewUbGDwHifnbJIKlhDAKH+096
-REtDhgKJeW7rwh3OJQb8CibqtF4BRR/9h0Tk9MWyqwMn+VVE0wHMaCK/2fR7AkEA
-vGihs4SeOZ+7IkmCPCDCiIe8J7Zc5Bx8pVMnscFyhBn9Gb53YLymLSxM8U2LCZGr
-f5+B8tXGongr9bn7iG/9+wJAJZRTHrFhjoGq5wNFFbCjWjcD5OoeZ3tYE9dUlzBM
-S42SlgBSh3896aWARUHt8VpSTnUbfpDIK34beAOrt1pxSg==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-----END RSA PRIVATE KEY-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQC+dlAC+rhVn9yXgDtS69cbVliS6wGgsEkUtJ7WRXxxNQFIeefJ
-+H6752z49SLx5+6UWPYPs0/ha/KSRn+BP/rot93JO1BSlOSgwp6w9Nj9O0QVV5Lc
-wrbJOSCJsjJaER9YHAffbCpBAexv0iD5wX/b1V/HrZ7nv6MBbJayCWHunQIDAQAB
-AoGBAIAkX86xWuYY6TRxDPjMPexhmrQ2MuEm2fR5VUh6dbBA5j0Z763+Z14K5VFW
-tI0m62iZtet4S+0xUIHDtrOCFU/mYXS95ynGh4zQFWyeDv9X8s1BIvjl9mbYrWbT
-eIp+uqblmgybkAPnBgJ3WRiDUpnoJaoYsncvIlEuhuOiY7ftAkEA5FRQJ/+dioSL
-KMtABp69EvdOJreaVMjYkChksiXDb/tHpZRco3xu7ob+cfDyZkZ87cHDFHlfWLNO
-l0z47tiO+wJBANWLNU0Mvrz5j8ba7rf3vdgVqVHeGS9COzyK4VPGKbQFVfa6MNjr
-mT3SEBQFvUJGg5OLWzniwn4X2zDhsRt4JUcCQQDewUbGDwHifnbJIKlhDAKH+096
-REtDhgKJeW7rwh3OJQb8CibqtF4BRR/9h0Tk9MWyqwMn+VVE0wHMaCK/2fR7AkEA
-vGihs4SeOZ+7IkmCPCDCiIe8J7Zc5Bx8pVMnscFyhBn9Gb53YLymLSxM8U2LCZGr
-f5+B8tXGongr9bn7iG/9+wJAJZRTHrFhjoGq5wNFFbCjWjcD5OoeZ3tYE9dUlzBM
-S42SlgBSh3896aWARUHt8VpSTnUbfpDIK34beAOrt1pxSg==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-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExGzAZ
BgNVBAoTEkFwYWNoZSBIVFRQIFNlcnZlcjEiMCAGA1UECxMZRm9yIFRlc3Rpbmcg
UHVycG9zZXMgT25seTEVMBMGA1UEAxMMbG9jYWxob3N0IENBMR0wGwYJKoZIhvcN
-AQkBFg5yb290QGxvY2FsaG9zdDAeFw0xMDA1MjYwMjIxMjlaFw0xMjA1MjUwMjIx
-MjlaMIGuMQswCQYDVQQGEwJVUzETMBEGA1UECBMKQ2FsaWZvcm5pYTEWMBQGA1UE
+AQkBFg5yb290QGxvY2FsaG9zdDAeFw0xMjA3MjMxNTQ5MDVaFw0xNDA3MjMxNTQ5
+MDVaMIGuMQswCQYDVQQGEwJVUzETMBEGA1UECBMKQ2FsaWZvcm5pYTEWMBQGA1UE
BxMNU2FudGEgQmFyYmFyYTEbMBkGA1UEChMSQXBhY2hlIEhUVFAgU2VydmVyMSIw
IAYDVQQLExlGb3IgVGVzdGluZyBQdXJwb3NlcyBPbmx5MRIwEAYDVQQDEwlsb2Nh
bGhvc3QxHTAbBgkqhkiG9w0BCQEWDnJvb3RAbG9jYWxob3N0MIGfMA0GCSqGSIb3
-DQEBAQUAA4GNADCBiQKBgQC+dlAC+rhVn9yXgDtS69cbVliS6wGgsEkUtJ7WRXxx
-NQFIeefJ+H6752z49SLx5+6UWPYPs0/ha/KSRn+BP/rot93JO1BSlOSgwp6w9Nj9
-O0QVV5LcwrbJOSCJsjJaER9YHAffbCpBAexv0iD5wX/b1V/HrZ7nv6MBbJayCWHu
-nQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAJFuBY/r4J+Mva0g7fnZotW3GLGmZTqu
-NVUnqTPctmYl0gjhmKExjKgYvwOcZblY7TYcgnW4YUzukWwrMgOe4uPIPmmIhmkZ
-RGyb1cojRNV9oTE8VpSTndj/oq6qoyXDHfor5t4ukrbYkylekpleyw10l8LTBm+E
-EYDtgPM/1kLB
+DQEBAQUAA4GNADCBiQKBgQDWLZSVeCaCRJJrecGt99nVKPtZJLQAo0D/JiQ7PwO+
+6wgx8dTL6eJ1Sum6ry0iA/cLVwm2F8Qf2UGGn/TsOAAX/UwN02EJ4xtMzB8J9YGF
+UWyx/uJ36ez1UA0JKBbK7NbkXAWpekt0be5O0oS30yrYKqV6FSX2uiNMG5g4d5yX
+RQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAKVumP/K/0dGcfm3uj43TPXhUhN8yf5M
+bqHUyQj5Gturv1kE2RviWDuSwrEyRkGSNJGfjRtqMzYgznJ90gj2sSAXoIQPONSN
+tHXbHaXFZADIZxy09DT5WtAwtLTu+TNugljnsgfk0OMnn4fpejKvuYkgVK2nzcW+
+7BXbrTnfTiBF
-----END CERTIFICATE-----
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExHDAa
BgNVBAoTE1Bvc3RmaXggU01UUCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0aW5n
IFB1cnBvc2VzIE9ubHkxFTATBgNVBAMTDGxvY2FsaG9zdCBDQTEdMBsGCSqGSIb3
-DQEJARYOcm9vdEBsb2NhbGhvc3QwHhcNMTAwNTI2MTMwMjUzWhcNMTIwNTI1MTMw
-MjUzWjCBrzELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNV
+DQEJARYOcm9vdEBsb2NhbGhvc3QwHhcNMTIwNzIzMTcxMTI0WhcNMTQwNzIzMTcx
+MTI0WjCBrzELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNV
BAcTDVNhbnRhIEJhcmJhcmExHDAaBgNVBAoTE1Bvc3RmaXggU01UUCBTZXJ2ZXIx
IjAgBgNVBAsTGUZvciBUZXN0aW5nIFB1cnBvc2VzIE9ubHkxEjAQBgNVBAMTCWxv
Y2FsaG9zdDEdMBsGCSqGSIb3DQEJARYOcm9vdEBsb2NhbGhvc3QwgZ8wDQYJKoZI
-hvcNAQEBBQADgY0AMIGJAoGBAMM3vhl/0UKk8QQOXJI2MqDBZKpE58jppUvuuVA+
-F67Qov+fkAeSSo2bkf5Vw6i2rp0f4QDsUYhOy850LfVWt//LawcLpHRbUg/ywr+t
-1Ql6MaVyDzRXLfoUD0jnvb0P2Oe5rSt8Nf3Mc22woeDVc2fbXrW1t3KBOtUOcLcz
-xotHAgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAhTxV0ezQWbkI7/LiiTycWuCBI57V
-MvsZF0wxwz6BUNUqTKkPoM0EWrmOpaFyNuNoiteQoCkUl9PqWafrfx7JWv9U23dG
-aEv5qmV85QmfjJU8720KcWJeQi3v8da+Ulb+AtbPxQX+ZRPKSe3mjZR0kte809p9
-r6NIsTOvpPkqUts=
+hvcNAQEBBQADgY0AMIGJAoGBAKSgRB36fxyHektWCoyhenuTUnuIpbVvk6YAlBn3
+zvAtp4cLQsaTEyjoXyrc9NwZxThzDb/Sc8xPAb/4YoZGK/bBD//EGQ3Y0DgLHdAL
+8FdKSqmFUiNgiXNKvJmvgoasDObkKirckX5EYhWU3rRolp/xA5arqsMLxxtzI0Uk
+bMX5AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEANozh8ATYxZhmP/mm5/qK1Bf8taEj
+zLtzww017OJIFNI3/ysOipnYMF6rtV9g5JRMKH4DkPExoFPTHeMnvWcYhvutmMlP
+qpRdvOh+TjYdKYk+TuQJUFRbADQm7QnqvoZkQDvk9hSMWdKyPoIzYoadcIGAVdQ+
+AK+miDREKjIKA/I=
-----END CERTIFICATE-----
MRYwFAYDVQQHEw1TYW50YSBCYXJiYXJhMRwwGgYDVQQKExNQb3N0Zml4IFNNVFAg
U2VydmVyMSIwIAYDVQQLExlGb3IgVGVzdGluZyBQdXJwb3NlcyBPbmx5MRIwEAYD
VQQDEwlsb2NhbGhvc3QxHTAbBgkqhkiG9w0BCQEWDnJvb3RAbG9jYWxob3N0MIGf
-MA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDDN74Zf9FCpPEEDlySNjKgwWSqROfI
-6aVL7rlQPheu0KL/n5AHkkqNm5H+VcOotq6dH+EA7FGITsvOdC31Vrf/y2sHC6R0
-W1IP8sK/rdUJejGlcg80Vy36FA9I5729D9jnua0rfDX9zHNtsKHg1XNn2161tbdy
-gTrVDnC3M8aLRwIDAQABoAAwDQYJKoZIhvcNAQEFBQADgYEATlg5GumXOYmwwZZy
-VNWFFEuBp6wwCZyNpgg7/YmTgOC7BitajbMI/8vW/TabfLJ+04yf+Bd2HUFM0edy
-SFB64h0w0a3NwLHAYRdtrsYWh9cGVxZV0TfsgwaxWwdL6ePx0prLzYi+1dhs/ocy
-1nweyuVyXYFNspT2Y83AGXQFzbE=
+MA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCkoEQd+n8ch3pLVgqMoXp7k1J7iKW1
+b5OmAJQZ987wLaeHC0LGkxMo6F8q3PTcGcU4cw2/0nPMTwG/+GKGRiv2wQ//xBkN
+2NA4Cx3QC/BXSkqphVIjYIlzSryZr4KGrAzm5Coq3JF+RGIVlN60aJaf8QOWq6rD
+C8cbcyNFJGzF+QIDAQABoAAwDQYJKoZIhvcNAQEFBQADgYEAOzGNFvHDwv0DqX5u
+ueQ4Uw6PXmkHpebrofmTTKUaDqveWWNbjX4Gc6BfT0FBeQWnq9TRi24UVu0ELyga
+sI84vRH1sOsklEyHGCFYpqa4uB9QEwBzlHG1voIXH3YtkiwvUafFG7n/hwEh01Hh
+yrSK/OmAKhitLnP8m0eMi7FgY5A=
-----END CERTIFICATE REQUEST-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQDDN74Zf9FCpPEEDlySNjKgwWSqROfI6aVL7rlQPheu0KL/n5AH
-kkqNm5H+VcOotq6dH+EA7FGITsvOdC31Vrf/y2sHC6R0W1IP8sK/rdUJejGlcg80
-Vy36FA9I5729D9jnua0rfDX9zHNtsKHg1XNn2161tbdygTrVDnC3M8aLRwIDAQAB
-AoGBAIvJToZT0DQ4h5yv6/mGdZpG4R5LWO204HgO6QNccvjqzMzeJPRG/LuJunC0
-WPZmWYKJYUSX84n3YljjOEWFYxq02MUCyZBdpj8iUFAgtUeCXDJR8wnJvtccfd32
-WyKZLTJHgJSUkuwkB/1lKRQAh8ygf1kt05Krh0DFy0lrW9MBAkEA+5zkvpZ0Aekx
-GH3Y2OM5l4aardCEygM4FQyNmjjKv7wm/5YpXMTezSUlPEEH+NgrJcBxi0EOGiqw
-y8Aa1JuaCQJBAMafH0U0/9+dQfWBHQddTKhuLjakp7aqn0h5umgtnXNgKOqw0lnh
-XNe+hU5gAveDKaL2McO/nqABJjJjuBdkjs8CQQCcYlZ18pMlwOcn3sgRfaEFAb9P
-uuNdn4SS6Jt2OEgjxXDDuHP62c3U2Xp8KbsnukuPCj5IG+YE83WxHbRPYmrpAkEA
-tAyw2xrFTN8QWM33E6L3B8QBbpVqV0Nqate2LBQVo+4qiT1LIiER+Z0C2N5eMiMb
-TlehGxKMZ/1Cs/EDg2krrwJAdBqcBAbi7hD3zHye6FLyjYOaPGPlZxEmAwra44d1
-Nxw7juJNluUNvXoD2uT0gL23B8HFliAi1JNb/Fwoq3IXug==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-----END RSA PRIVATE KEY-----
-----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQDDN74Zf9FCpPEEDlySNjKgwWSqROfI6aVL7rlQPheu0KL/n5AH
-kkqNm5H+VcOotq6dH+EA7FGITsvOdC31Vrf/y2sHC6R0W1IP8sK/rdUJejGlcg80
-Vy36FA9I5729D9jnua0rfDX9zHNtsKHg1XNn2161tbdygTrVDnC3M8aLRwIDAQAB
-AoGBAIvJToZT0DQ4h5yv6/mGdZpG4R5LWO204HgO6QNccvjqzMzeJPRG/LuJunC0
-WPZmWYKJYUSX84n3YljjOEWFYxq02MUCyZBdpj8iUFAgtUeCXDJR8wnJvtccfd32
-WyKZLTJHgJSUkuwkB/1lKRQAh8ygf1kt05Krh0DFy0lrW9MBAkEA+5zkvpZ0Aekx
-GH3Y2OM5l4aardCEygM4FQyNmjjKv7wm/5YpXMTezSUlPEEH+NgrJcBxi0EOGiqw
-y8Aa1JuaCQJBAMafH0U0/9+dQfWBHQddTKhuLjakp7aqn0h5umgtnXNgKOqw0lnh
-XNe+hU5gAveDKaL2McO/nqABJjJjuBdkjs8CQQCcYlZ18pMlwOcn3sgRfaEFAb9P
-uuNdn4SS6Jt2OEgjxXDDuHP62c3U2Xp8KbsnukuPCj5IG+YE83WxHbRPYmrpAkEA
-tAyw2xrFTN8QWM33E6L3B8QBbpVqV0Nqate2LBQVo+4qiT1LIiER+Z0C2N5eMiMb
-TlehGxKMZ/1Cs/EDg2krrwJAdBqcBAbi7hD3zHye6FLyjYOaPGPlZxEmAwra44d1
-Nxw7juJNluUNvXoD2uT0gL23B8HFliAi1JNb/Fwoq3IXug==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-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
EzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbnRhIEJhcmJhcmExHDAa
BgNVBAoTE1Bvc3RmaXggU01UUCBTZXJ2ZXIxIjAgBgNVBAsTGUZvciBUZXN0aW5n
IFB1cnBvc2VzIE9ubHkxFTATBgNVBAMTDGxvY2FsaG9zdCBDQTEdMBsGCSqGSIb3
-DQEJARYOcm9vdEBsb2NhbGhvc3QwHhcNMTAwNTI2MTMwMjUzWhcNMTIwNTI1MTMw
-MjUzWjCBrzELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNV
+DQEJARYOcm9vdEBsb2NhbGhvc3QwHhcNMTIwNzIzMTcxMTI0WhcNMTQwNzIzMTcx
+MTI0WjCBrzELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNV
BAcTDVNhbnRhIEJhcmJhcmExHDAaBgNVBAoTE1Bvc3RmaXggU01UUCBTZXJ2ZXIx
IjAgBgNVBAsTGUZvciBUZXN0aW5nIFB1cnBvc2VzIE9ubHkxEjAQBgNVBAMTCWxv
Y2FsaG9zdDEdMBsGCSqGSIb3DQEJARYOcm9vdEBsb2NhbGhvc3QwgZ8wDQYJKoZI
-hvcNAQEBBQADgY0AMIGJAoGBAMM3vhl/0UKk8QQOXJI2MqDBZKpE58jppUvuuVA+
-F67Qov+fkAeSSo2bkf5Vw6i2rp0f4QDsUYhOy850LfVWt//LawcLpHRbUg/ywr+t
-1Ql6MaVyDzRXLfoUD0jnvb0P2Oe5rSt8Nf3Mc22woeDVc2fbXrW1t3KBOtUOcLcz
-xotHAgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAhTxV0ezQWbkI7/LiiTycWuCBI57V
-MvsZF0wxwz6BUNUqTKkPoM0EWrmOpaFyNuNoiteQoCkUl9PqWafrfx7JWv9U23dG
-aEv5qmV85QmfjJU8720KcWJeQi3v8da+Ulb+AtbPxQX+ZRPKSe3mjZR0kte809p9
-r6NIsTOvpPkqUts=
+hvcNAQEBBQADgY0AMIGJAoGBAKSgRB36fxyHektWCoyhenuTUnuIpbVvk6YAlBn3
+zvAtp4cLQsaTEyjoXyrc9NwZxThzDb/Sc8xPAb/4YoZGK/bBD//EGQ3Y0DgLHdAL
+8FdKSqmFUiNgiXNKvJmvgoasDObkKirckX5EYhWU3rRolp/xA5arqsMLxxtzI0Uk
+bMX5AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEANozh8ATYxZhmP/mm5/qK1Bf8taEj
+zLtzww017OJIFNI3/ysOipnYMF6rtV9g5JRMKH4DkPExoFPTHeMnvWcYhvutmMlP
+qpRdvOh+TjYdKYk+TuQJUFRbADQm7QnqvoZkQDvk9hSMWdKyPoIzYoadcIGAVdQ+
+AK+miDREKjIKA/I=
-----END CERTIFICATE-----
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2011.06.22.12.31.06; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.29.20.09.47; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@@@version: 3.2
-# $Header: /etc/syslog-ng/.rcs/syslog-ng.conf,v 1.1 2010/11/29 20:09:47 root Exp $
-#
-# Syslog-ng default configuration file for Gentoo Linux
-
-options {
- chain_hostnames(no);
- flush_lines(0);
-
- # The default action of syslog-ng is to log a STATS line
- # to the file every 10 minutes. That's pretty ugly after a while.
- # Change it to every 12 hours so you get a nice daily update of
- # how many messages syslog-ng missed (0).
- stats_freq(43200);
- perm(0640);
-};
-
-source src {
- unix-stream("/dev/log" max-connections(256));
- internal();
- file("/proc/kmsg");
-};
-
-destination d_messages { file("/var/log/syslog.d/$FACILITY"); };
-destination d_msg { file("/var/log/messages"); };
-destination d_debug { file("/var/log/debug.log"); };
-destination d_mail { file("/var/log/mail/$PROGRAM" create_dirs(yes)); };
-
-
-# By default messages are logged to tty12...
-destination d_console_all { file("/dev/tty12"); };
-# ...if you intend to use /dev/console for programs like xconsole
-# you can comment out the destination line above that references /dev/tty12
-# and uncomment the line below.
-#destination console_all { file("/dev/console"); };
-
-#destination d_sql {
-# sql( type(mysql)
-# host("localhost") username("syslog") password("Jafohn7a")
-# database("syslog")
-# table( "messages_${R_YEAR}_${R_MONTH}" )
-# columns( "datetime DATETIME", "facility VARCHAR(12)", "level VARCHAR(12)",
-# "host VARCHAR(32)", "program VARCHAR(250)", "pid VARCHAR(8)", "message TEXT" )
-# values( "${R_YEAR}-${R_MONTH}-${R_DAY} ${R_HOUR}:${R_MIN}:${R_SEC}", "$FACILITY", "$LEVEL",
-# "$HOST", "$PROGRAM", "$PID", "$MSGONLY" )
-# indexes( "datetime", "facility", "level", "host", "program" )
-# );
-#};
-
-#log { source(src); destination(messages); };
-#log { source(src); destination(d_console_all); };
-
-filter f_console { level( warn..emerg ); };
-filter f_messages { level(info..emerg)
- and not facility(auth, authpriv, mail, news); };
-filter f_nocron { not ( facility(cron) and level(info) ); };
-filter f_mail { facility(mail); };
-
-
-log { source(src); destination(d_messages); };
-#log { source(src); destination(d_sql); };
-#log { source(src); destination(d_debug); };
-log { source(src); filter(f_console); destination(d_console_all); };
-log { source(src); filter(f_messages); destination(d_msg); };
-log { source(src); filter(f_mail); destination(d_mail); };
-
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d1 2
-a2 2
-@@version: 3.0
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3,v 1.1 2010/04/06 02:11:35 mr_bones_ Exp $
-@
+++ /dev/null
-head 1.2;
-access;
-symbols;
-locks; strict;
-comment @# @;
-
-
-1.2
-date 2011.01.18.17.44.14; author root; state Exp;
-branches;
-next 1.1;
-
-1.1
-date 2010.11.29.18.02.41; author root; state Exp;
-branches;
-next ;
-
-
-desc
-@Initialising repository
-@
-
-
-1.2
-log
-@Checked in.
-@
-text
-@@@version: 3.2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3.2,v 1.1 2011/01/18 17:44:14 mr_bones_ Exp $
-#
-# Syslog-ng default configuration file for Gentoo Linux
-
-options {
- chain_hostnames(no);
-
- # The default action of syslog-ng is to log a STATS line
- # to the file every 10 minutes. That's pretty ugly after a while.
- # Change it to every 12 hours so you get a nice daily update of
- # how many messages syslog-ng missed (0).
- stats_freq(43200);
- # The default action of syslog-ng is to log a MARK line
- # to the file every 20 minutes. That's seems high for most
- # people so turn it down to once an hour. Set it to zero
- # if you don't want the functionality at all.
- mark_freq(3600);
-};
-
-source src {
- unix-stream("/dev/log" max-connections(256));
- internal();
- file("/proc/kmsg");
-};
-
-destination messages { file("/var/log/messages"); };
-
-# By default messages are logged to tty12...
-destination console_all { file("/dev/tty12"); };
-# ...if you intend to use /dev/console for programs like xconsole
-# you can comment out the destination line above that references /dev/tty12
-# and uncomment the line below.
-#destination console_all { file("/dev/console"); };
-
-log { source(src); destination(messages); };
-log { source(src); destination(console_all); };
-@
-
-
-1.1
-log
-@Initial revision
-@
-text
-@d1 2
-a2 2
-@@version: 3.0
-# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3,v 1.1 2010/04/06 02:11:35 mr_bones_ Exp $
-d14 5
-@
@version: 3.2
-# $Header: /etc/syslog-ng/.rcs/syslog-ng.conf,v 1.2 2011/06/22 12:31:06 root Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-admin/syslog-ng/files/syslog-ng.conf.gentoo.3.2,v 1.1 2011/01/18 17:44:14 mr_bones_ Exp $
#
# Syslog-ng default configuration file for Gentoo Linux
frac_digits(3);
ts_format(iso);
+
+ # The default action of syslog-ng is to log a MARK line
+ # to the file every 20 minutes. That's seems high for most
+ # people so turn it down to once an hour. Set it to zero
+ # if you don't want the functionality at all.
+ mark_freq(3600);
};
source src {
-# sysstat-10.0.3 configuration file.
+# sysstat-10.0.4 configuration file.
# How long to keep log files (in days).
# If value is greater than 28, then log files are kept in
--- /dev/null
+%% dvipdfmx.cfg for dvipdfmx. (Public domain.)
+%%
+%% PDF Version Setting
+%%
+%% PDF (minor) version stamp to use in output file.
+%% This also implies maximal version of PDF file allowed to be included.
+%% Dvipdfmx does not support 1.0, 1.1, 1.2 since TrueType font embedded
+%% as CIDFontType2 requires at least version 1.3. Transparent imaging
+%% model requires version 1.4. So if you want soft-masking support for
+%% PNG image with alpha channels, you should set version to 4 or higher.
+%% PDF 1.5 enables object compression.
+
+V 5
+
+%% Dvipdfmx Compatibility Flags
+%%
+%% 0x0002 Use semi-transparent filling for tpic shading command,
+%% instead of opaque gray color. (requires PDF 1.4)
+%% 0x0004 Treat all CIDFont as fixed-pitch font.
+%% This is only for backward compatibility. Don't use that.
+%% 0x0008 Do not replace duplicate fontmap entries.
+%% Dvipdfm's (not 'x') behaviour.
+%% 0x0010 Do not optimize PDF destinations. Use this if you want to
+%% refer from other files to destinations in the current file.
+
+%C 0x0000
+
+%% PDF Document Settings
+%%
+%% Papersize Option:
+%%
+%% p papersize-spec
+%%
+%% papersize-spec is 'paper-format' or length-pair, e.g., 'a4', 'letter',
+%% '20cm,30cm'. Recognized unit is 'cm', 'mm', 'bp', 'pt', 'in'.
+
+p a4
+
+%% Annotation Box Margin:
+%%
+%% g length
+%%
+%% Add margin to annotation rectangle created via various \specials. Many
+%% TeX macro packages set the annotation bounding box equal to the TeX box
+%% that encloses the material. That's not always what you want.
+%% Annotations created by pdf:bannot/pdf:eannot is also affected.
+
+%g 0
+
+%% Bookmark Open Level:
+%%
+%% O integer
+%%
+%% Mark bookmark (outline) item as initial state 'open' if the depth
+%% of that item (from root node) is less than or equal to the integer
+%% specified with this option.
+
+O 0
+
+%% PDF Security (Encryption) Setting
+%%
+%% Those options won't take effects unless you use flag 'S'.
+%%
+%% Key bits for PDF encryption (40 - 128)
+
+K 40
+
+%% Permission flag for PDF encryption: Revision will be 3 if the key size
+%% is greater than 40 bits.
+%%
+%% 0x0004 (Revision 2) Print the document.
+%% (Revision 3) Print the document (possibly not at the highest quality
+%% level, depending on whether bit 12[0x0800] is also set).
+%% 0x0008 Modify the contents of the document by operations other than those
+%% controlled by bits 6[0x0020], 9[0x0100], and 11[0x0400].
+%% 0x0010 (Revision 2) Copy or otherwise extract text and graphics from the
+%% document, including extracting text and graphics (in support of
+%% accessibility to disabled users or for other purposes).
+%% (Revision 3) Copy or otherwise extract text and grphics from the
+%% document by operations other than that controlled by bit 10[0x0200].
+%% 0x0020 Add or modify text annotations, fill in interactive form fields,
+%% and, if bit 4[0x0008] is also set, create or modify interactive
+%% form fields (including signature fields).
+%%
+%% (Revision 3 only)
+%% 0x0100 Fill in existing interactive form fields (including signature
+%% fields), even if bit 6 is clear.
+%% 0x0200 Extract text and graphics (in support of accessibility to disabled
+%% users or for other purposes).
+%% 0x0400 Assemble the document (insert, rotate, or delete pages and create
+%% bookmarks or thumbnail images), even if bit 4 is clear.
+%% 0x0800 Print the document to a representation from which a faithful digital
+%% copy of the PDF content could be generated. When this bit is clear
+%% (and bit 3 is set), printing is limited to a low-level representation
+%% of the appearance, possibly of degraded quality.
+
+P 0x003C
+
+%% Image Handler
+%%
+%% With 'D' option dvipdfmx may invoke shell command via system()
+%% function call.
+%%
+%% Command-line template for a-to-b conversion:
+%%
+%% Supported target format ('b') is currently PDF.
+%% Percent sign '%' is special character:
+%%
+%% %i Input file name (FQPN). Name of file to be converted to PDF.
+%% %o Output file name (FQPN). Temporary file to store conversion
+%% result. Removed after inclusion is finished. (regardless of
+%% success or failure)
+%% %b The "base" name of the input file, e.g., "foo" instead of
+%% "foo.eps".
+%% %v The PDF version to be converted to, e.g. "1.4" for PDF 1.4.
+%% %% Replaced with single '%'.
+
+%% Ghostscript (PS-to-PDF and PDF-to-PDF):
+%%
+%% ps2pdf is a front-end to gs. For a complete list of options, see
+%% http://ghostscript.com/doc/current/Ps2pdf.htm#Options
+%%
+%% By default, gs encodes all images contained in a PS file using
+%% the lossy DCT (i.e., JPEG) filter. This often leads to inferior
+%% result (see the discussion at http://electron.mit.edu/~gsteele/pdf/).
+%% The "-dAutoFilterXXXImages" and "-dXXXImageFilter" options used
+%% below force all images to be encoded with the lossless Flate (zlib,
+%% same as PNG) filter. Note that if the PS file already contains DCT
+%% encoded images (which is possible in PS level 2), then these images
+%% will also be re-encoded using Flate. To turn the conversion off,
+%% simply remove the options mentioned above.
+%%
+%% Also note that PAPERSIZE=a0 is specified below. This converts PS
+%% files (including EPS) to A0 papersize PDF. This is necessary to
+%% prevent gs from clipping PS figure at some papersize. (A0 above
+%% simply means large size paper.) If you have figures even larger
+%% than A0, and their llx=lly=0, you can use "-dEPSCrop" instead of
+%% "-sPAPERSIZE=a0"
+%%
+D "ps2pdf -dCompatibilityLevel=%v -sPAPERSIZE=a0 -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode '%i' '%o'"
+
+%% Frank Siegert's PStill:
+%D "/usr/local/bin/pstill -c -o '%o' '%i'"
+
+%% Adobe Acrobat Distiller:
+%D "/usr/local/bin/distill -quiet -pairs '%i' '%o'"
+
+%% Batik + Fop (SVG-to-PDF):
+%% If you want both PS and SVG, you need to write a script or program
+%% that selectively invokes converters.
+%D "java -classpath classpaths -jar /path/to/batik-rasterizer.jar -m application/pdf -d '%o' '%i'"
+
+%% There are no way to directly know suggested size of (raster) images.
+%% You may want to use %b here, since you can try reading the ebb file
+%% to see what is natural (physical) size of images.
+%D "ras2pdf -r 300x300 -b '%b.bb' -o '%o' '%i'"
+
+%% ImageMagick:
+%% Easiest way to support various file formats.
+%D "convert '%i' 'epdf:%o'"
+
+%% Other Options
+%%
+%% DPI for PK font creation
+
+%r 600
+
+%% Set number of fractional digit kept for various numbers in PDF page
+%% content output. By setting this to 2 (default), dvipdfmx rounds
+%% real numbers at 2nd fractional (decimal) digit; e.g., "3.14159" is
+%% written as "3.14". Increasing this to more than 2 isn't meaningful
+%% for old Acrobat due to implementation limit of Acrobat.
+%% Length 0.01 in unscaled coordinate system amount to width of 1 pixel
+%% in 7200ppi display.
+
+%d 5
+
+%% Font Map Files
+%%
+%% teTeX 2.x and TeX Live using updmap (pdfTeX format)
+f pdftex.map
+
+%% teTeX 2.x and TeX Live using updmap (DVIPDFM format)
+%f dvipdfm.map
+
+%% teTeX 2.x and TeX Live using updmap (DVIPS format)
+%% MiKTeX 2.2 and 2.3
+%f psfonts.map
+
+%% Put additonal fontmap files here (usually for Type0 fonts)
+f cid-x.map
+++ /dev/null
-% config.ps - configuration file for dvips.
-% Tomas Rokicki, Thomas Esser, Karl Berry, et al., 1986ff, public domain.
-
-% Memory available. Download the three-line PostScript file:
-% %! Hey, we're PostScript
-% /Times-Roman findfont 30 scalefont setfont 144 432 moveto
-% vmstatus exch sub 40 string cvs show pop showpage
-% to determine this number. (It will be the only thing printed.)
-m 3500000
-
-% Run securely. z2 disables both shell command execution in
-% `\special' and config files (via the `E' option) and opening of any
-% absolute filenames. z1, the default, forbids shell escapes but
-% allows absolute filenames. z0 allows both. The corresponding
-% command line options are -R0|-R1|-R2
-z1
-
-% How to print, maybe with lp instead lpr, etc. If commented-out, output
-% will go into a file by default.
-%o |lpr
-
-% Default resolution of this device, in dots per inch.
-D 600
-X 600
-Y 600
-
-% Metafont mode. (This is completely different from the -M
-% command-line option, which controls whether mktexpk is invoked.)
-% See ../../metafont/misc/modes.mf for a list of mode names. This mode
-% and the D number above must agree, or mktexpk will get confused.
-M ljfour
-
-% Last resort bitmap sizes.
-R 300 600
-
-% Correct printer offset. You can use testpage.tex from the LaTeX
-% distribution to find these numbers.
-O 0pt,0pt
-
-% Bitmap font compression. Results in more compact output files, but
-% sometimes causes trouble. So the default is disabled. Set Z1 to enable
-% this feature.
-Z0
-
-% Partially download Type 1 fonts by default. Only reason not to do
-% this is if you encounter bugs. (Please report them to
-% @email{tex-k@tug.org} if you do.)
-j
-
-% This shows how to add your own map file.
-% Remove the comment and adjust the name:
-% p +myfonts.map
-
-% If we have setpagedevice, use that.
-% else if we have the a4 resp. letter operator, use that.
-% else do nothing to set the page size.
-%
-% In the past, the a4size and letterSize definitions did not set the
-% page size, but we want to set it if we can so that ps2pdf can work
-% properly. Here, a4 and a4size, and letter and letterSize, are
-% identical, and we prefer the a4/letter names -- texconfig uses them.
-
-% 0 0 595 842 is the right bounding box that applications expect
-% for A4. Since dvips always rounds up, choose something slightly
-% smaller for our paper size.
-
-@ a4 210mm 297mm
-@+ ! %%DocumentPaperSizes: a4
-@+ %%BeginPaperSize: a4
-@+ /setpagedevice where
-@+ { pop << /PageSize [595 842] >> setpagedevice }
-@+ { /a4 where { pop a4 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ letter 8.5in 11in
-@+ ! %%DocumentPaperSizes: Letter
-@+ %%BeginPaperSize: Letter
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 792] >> setpagedevice }
-@+ { /letter where { pop letter } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a4size 210mm 297mm
-@+ ! %%DocumentPaperSizes: a4
-@+ %%BeginPaperSize: a4
-@+ /setpagedevice where
-@+ { pop << /PageSize [595 842] >> setpagedevice }
-@+ { /a4 where { pop a4 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ letterSize 8.5in 11in
-@+ ! %%DocumentPaperSizes: Letter
-@+ %%BeginPaperSize: Letter
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 792] >> setpagedevice }
-@+ { /letter where { pop letter } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-% The jacow paper size is the smaller of letter and a4 in both
-% dimensions, and can therefore hopefully be printed on either paper
-% size. As far as we know, Volker Schaa first used it for the JACOW
-% conference proceedings that he produced.
-@ jacow 210mm 11in
-@+ ! %%DocumentPaperSizes: jacow
-@+ %%BeginPaperSize: jacow
-@+ /setpagedevice where
-@+ { pop << /PageSize [595 792] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-% The smallbook paper size has been used by the Free Software Foundation
-% to print manuals for many years, and is part of Texinfo.
-@ smallbook 7in 9.25in
-@+ ! %%DocumentPaperSizes: smallbook
-@+ %%BeginPaperSize: smallbook
-@+ /setpagedevice where
-@+ { pop << /PageSize [504 666] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ halfexecutive 133mm 184mm
-@+ ! %%DocumentPaperSizes: halfexecutive
-@+ %%BeginPaperSize: halfexecutive
-@+ /setpagedevice where
-@+ { pop << /PageSize [378 522] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ halfletter 140mm 216mm
-@+ ! %%DocumentPaperSizes: halfletter
-@+ %%BeginPaperSize: halfletter
-@+ /setpagedevice where
-@+ { pop << /PageSize [396 612] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ statement 140mm 216mm
-@+ ! %%DocumentPaperSizes: statement
-@+ %%BeginPaperSize: statement
-@+ /setpagedevice where
-@+ { pop << /PageSize [396 612] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ executive 184mm 267mm
-@+ ! %%DocumentPaperSizes: executive
-@+ %%BeginPaperSize: executive
-@+ /setpagedevice where
-@+ { pop << /PageSize [522 756] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-% for powerdot
-@ screen 8.25in 11in
-@+ ! %%DocumentPaperSizes: Screen
-@+ %%BeginPaperSize: Screen
-@+ /setpagedevice where
-@+ { pop << /PageSize [594 792] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-% a common size for printers (in north america).
-@ sixbynine 6in 9in
-@+ ! %%DocumentPaperSizes: SixByNine
-@+ %%BeginPaperSize: SixByNine
-@+ /setpagedevice where
-@+ { pop << /PageSize [432 648] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ quarto 215mm 275mm
-@+ ! %%DocumentPaperSizes: quarto
-@+ %%BeginPaperSize: quarto
-@+ /setpagedevice where
-@+ { pop << /PageSize [610 780] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ note 216mm 279mm
-@+ ! %%DocumentPaperSizes: note
-@+ %%BeginPaperSize: note
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 792] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ folio 216mm 330mm
-@+ ! %%DocumentPaperSizes: folio
-@+ %%BeginPaperSize: folio
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 936] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ legal 8.5in 14in
-@+ ! %%DocumentPaperSizes: Legal
-@+ %%BeginPaperSize: Legal
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 1008] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ 10x14 10in 14in
-@+ ! %%DocumentPaperSizes: 10x14
-@+ %%BeginPaperSize: 10x14
-@+ /setpagedevice where
-@+ { pop << /PageSize [720 1008] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ ledger 17in 11in
-@+ ! %%DocumentPaperSizes: Ledger
-@+ %%BeginPaperSize: Ledger
-@+ /setpagedevice where
-@+ { pop << /PageSize [1224 792] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ tabloid 11in 17in
-@+ ! %%DocumentPaperSizes: Tabloid
-@+ %%BeginPaperSize: Tabloid
-@+ /setpagedevice where
-@+ { pop << /PageSize [792 1224] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ 11x17 11in 17in
-@+ ! %%DocumentPaperSizes: 11x17
-@+ %%BeginPaperSize: 11x17
-@+ /setpagedevice where
-@+ { pop << /PageSize [792 1224] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ a0 841mm 1189mm
-@+ ! %%DocumentPaperSizes: a0
-@+ %%BeginPaperSize: a0
-@+ /setpagedevice where
-@+ { pop << /PageSize [2384 3370] >> setpagedevice }
-@+ { /a0 where { pop a0 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a1 594mm 841mm
-@+ ! %%DocumentPaperSizes: a1
-@+ %%BeginPaperSize: a1
-@+ /setpagedevice where
-@+ { pop << /PageSize [1684 2384] >> setpagedevice }
-@+ { /a1 where { pop a1 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a2 420mm 594mm
-@+ ! %%DocumentPaperSizes: a2
-@+ %%BeginPaperSize: a2
-@+ /setpagedevice where
-@+ { pop << /PageSize [1191 1684] >> setpagedevice }
-@+ { /a2 where { pop a2 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a3 297mm 420mm
-@+ ! %%DocumentPaperSizes: a3
-@+ %%BeginPaperSize: a3
-@+ /setpagedevice where
-@+ { pop << /PageSize [842 1191] >> setpagedevice }
-@+ { /a3 where { pop a3 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a5 148mm 210mm
-@+ ! %%DocumentPaperSizes: a5
-@+ %%BeginPaperSize: a5
-@+ /setpagedevice where
-@+ { pop << /PageSize [420 595] >> setpagedevice }
-@+ { /a5 where { pop a5 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a6 105mm 148mm
-@+ ! %%DocumentPaperSizes: a6
-@+ %%BeginPaperSize: a6
-@+ /setpagedevice where
-@+ { pop << /PageSize [298 420] >> setpagedevice }
-@+ { /a6 where { pop a6 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a7 74mm 105mm
-@+ ! %%DocumentPaperSizes: a7
-@+ %%BeginPaperSize: a7
-@+ /setpagedevice where
-@+ { pop << /PageSize [210 298] >> setpagedevice }
-@+ { /a7 where { pop a7 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a8 52mm 74mm
-@+ ! %%DocumentPaperSizes: a8
-@+ %%BeginPaperSize: a8
-@+ /setpagedevice where
-@+ { pop << /PageSize [147 210] >> setpagedevice }
-@+ { /a8 where { pop a8 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a9 37mm 52mm
-@+ ! %%DocumentPaperSizes: a9
-@+ %%BeginPaperSize: a9
-@+ /setpagedevice where
-@+ { pop << /PageSize [105 147] >> setpagedevice }
-@+ { /a9 where { pop a9 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ a10 26mm 37mm
-@+ ! %%DocumentPaperSizes: a10
-@+ %%BeginPaperSize: a10
-@+ /setpagedevice where
-@+ { pop << /PageSize [74 105] >> setpagedevice }
-@+ { /a10 where { pop a10 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb0 1030mm 1456mm
-@+ ! %%DocumentPaperSizes: jisb0
-@+ %%BeginPaperSize: jisb0
-@+ /setpagedevice where
-@+ { pop << /PageSize [2920 4127] >> setpagedevice }
-@+ { /jisb0 where { pop jisb0 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb1 728mm 1030mm
-@+ ! %%DocumentPaperSizes: jisb1
-@+ %%BeginPaperSize: jisb1
-@+ /setpagedevice where
-@+ { pop << /PageSize [2064 2920] >> setpagedevice }
-@+ { /jisb1 where { pop jisb1 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb2 515mm 728mm
-@+ ! %%DocumentPaperSizes: jisb2
-@+ %%BeginPaperSize: jisb2
-@+ /setpagedevice where
-@+ { pop << /PageSize [1460 2064] >> setpagedevice }
-@+ { /jisb2 where { pop jisb2 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb3 364mm 515mm
-@+ ! %%DocumentPaperSizes: jisb3
-@+ %%BeginPaperSize: jisb3
-@+ /setpagedevice where
-@+ { pop << /PageSize [1032 1460] >> setpagedevice }
-@+ { /jisb3 where { pop jisb3 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb4 257mm 364mm
-@+ ! %%DocumentPaperSizes: jisb4
-@+ %%BeginPaperSize: jisb4
-@+ /setpagedevice where
-@+ { pop << /PageSize [729 1032] >> setpagedevice }
-@+ { /jisb4 where { pop jisb4 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb5 182mm 257mm
-@+ ! %%DocumentPaperSizes: jisb5
-@+ %%BeginPaperSize: jisb5
-@+ /setpagedevice where
-@+ { pop << /PageSize [516 729] >> setpagedevice }
-@+ { /jisb5 where { pop jisb5 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb6 128mm 182mm
-@+ ! %%DocumentPaperSizes: jisb6
-@+ %%BeginPaperSize: jisb6
-@+ /setpagedevice where
-@+ { pop << /PageSize [363 516] >> setpagedevice }
-@+ { /jisb6 where { pop jisb6 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb7 91mm 128mm
-@+ ! %%DocumentPaperSizes: jisb7
-@+ %%BeginPaperSize: jisb7
-@+ /setpagedevice where
-@+ { pop << /PageSize [258 363] >> setpagedevice }
-@+ { /jisb7 where { pop jisb7 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ jisb8 64mm 91mm
-@+ ! %%DocumentPaperSizes: jisb8
-@+ %%BeginPaperSize: jisb8
-@+ /setpagedevice where
-@+ { pop << /PageSize [181 258] >> setpagedevice }
-@+ { /jisb8 where { pop jisb8 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b0 1000mm 1414mm
-@+ ! %%DocumentPaperSizes: b0
-@+ %%BeginPaperSize: b0
-@+ /setpagedevice where
-@+ { pop << /PageSize [2835 4008] >> setpagedevice }
-@+ { /b0 where { pop b0 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b1 707mm 1000mm
-@+ ! %%DocumentPaperSizes: b1
-@+ %%BeginPaperSize: b1
-@+ /setpagedevice where
-@+ { pop << /PageSize [2004 2835] >> setpagedevice }
-@+ { /b1 where { pop b1 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b2 500mm 707mm
-@+ ! %%DocumentPaperSizes: b2
-@+ %%BeginPaperSize: b2
-@+ /setpagedevice where
-@+ { pop << /PageSize [1417 2004] >> setpagedevice }
-@+ { /b2 where { pop b2 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b3 353mm 500mm
-@+ ! %%DocumentPaperSizes: b3
-@+ %%BeginPaperSize: b3
-@+ /setpagedevice where
-@+ { pop << /PageSize [1001 1417] >> setpagedevice }
-@+ { /b3 where { pop b3 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b4 250mm 353mm
-@+ ! %%DocumentPaperSizes: b4
-@+ %%BeginPaperSize: b4
-@+ /setpagedevice where
-@+ { pop << /PageSize [709 1001] >> setpagedevice }
-@+ { /b4 where { pop b4 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b5 176mm 250mm
-@+ ! %%DocumentPaperSizes: b5
-@+ %%BeginPaperSize: b5
-@+ /setpagedevice where
-@+ { pop << /PageSize [499 709] >> setpagedevice }
-@+ { /b5 where { pop b5 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ b6 125mm 176mm
-@+ ! %%DocumentPaperSizes: b6
-@+ %%BeginPaperSize: b6
-@+ /setpagedevice where
-@+ { pop << /PageSize [354 499] >> setpagedevice }
-@+ { /b6 where { pop b6 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ c5 162mm 229mm
-@+ ! %%DocumentPaperSizes: c5
-@+ %%BeginPaperSize: c5
-@+ /setpagedevice where
-@+ { pop << /PageSize [459 649] >> setpagedevice }
-@+ { /c5 where { pop c5 } if }
-@+ ifelse
-@+ %%EndPaperSize
-
-@ DL 110mm 220mm
-@+ ! %%DocumentPaperSizes: DL
-@+ %%BeginPaperSize: DL
-@+ /setpagedevice where
-@+ { pop << /PageSize [312 624] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ Comm10 105mm 241mm
-@+ ! %%DocumentPaperSizes: Comm10
-@+ %%BeginPaperSize: Comm10
-@+ /setpagedevice where
-@+ { pop << /PageSize [297 684] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ Monarch 98.4mm 190.5mm
-@+ ! %%DocumentPaperSizes: Monarch
-@+ %%BeginPaperSize: Monarch
-@+ /setpagedevice where
-@+ { pop << /PageSize [279 540] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ archE 36in 48in
-@+ ! %%DocumentPaperSizes: archE
-@+ %%BeginPaperSize: archE
-@+ /setpagedevice where
-@+ { pop << /PageSize [2592 3456] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ archD 24in 36in
-@+ ! %%DocumentPaperSizes: archD
-@+ %%BeginPaperSize: archD
-@+ /setpagedevice where
-@+ { pop << /PageSize [1728 2592] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ archC 18in 24in
-@+ ! %%DocumentPaperSizes: archC
-@+ %%BeginPaperSize: archC
-@+ /setpagedevice where
-@+ { pop << /PageSize [1296 1728] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ archB 12in 18in
-@+ ! %%DocumentPaperSizes: archB
-@+ %%BeginPaperSize: archB
-@+ /setpagedevice where
-@+ { pop << /PageSize [864 1296] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ archA 9in 12in
-@+ ! %%DocumentPaperSizes: archA
-@+ %%BeginPaperSize: archA
-@+ /setpagedevice where
-@+ { pop << /PageSize [648 864] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ flsa 216mm 330.2mm
-@+ ! %%DocumentPaperSizes: flsa
-@+ %%BeginPaperSize: flsa
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 936] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ flse 216mm 330.2mm
-@+ ! %%DocumentPaperSizes: flse
-@+ %%BeginPaperSize: flse
-@+ /setpagedevice where
-@+ { pop << /PageSize [612 936] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ csheet 431.8mm 558.8mm
-@+ ! %%DocumentPaperSizes: csheet
-@+ %%BeginPaperSize: csheet
-@+ /setpagedevice where
-@+ { pop << /PageSize [1224 1584] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ dsheet 558.8mm 863.6mm
-@+ ! %%DocumentPaperSizes: dsheet
-@+ %%BeginPaperSize: dsheet
-@+ /setpagedevice where
-@+ { pop << /PageSize [1584 2448] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ esheet 863.6mm 1117.6mm
-@+ ! %%DocumentPaperSizes: esheet
-@+ %%BeginPaperSize: esheet
-@+ /setpagedevice where
-@+ { pop << /PageSize [2448 3168] >> setpagedevice }
-@+ if
-@+ %%EndPaperSize
-
-@ unknown 0in 0in
-@+ statusdict /setpageparams known { hsize vsize 0 1 statusdict begin {
-@+ setpageparams } stopped end } { true } ifelse { statusdict /setpage known
-@+ { hsize vsize 1 statusdict begin { setpage } stopped pop end } if } if
./:
.:
dvipdfm
-dvips
+dvipdfmx
dvips.d
fmtutil.d
language.dat.d
./dvipdfm/config:
-./dvips:
-config
-
-./dvips/config:
-config.ps
+./dvipdfmx:
+dvipdfmx.cfg
./dvips.d:
20sizes.cnf
./updmap.d:
-.keep_app-text_texlive-core-0
00updmap.cfg
+.keep_app-text_texlive-core-0
texlive-basic.cfg
texlive-fontsrecommended.cfg
texlive-latex.cfg
./web2c:
-.keep_app-text_texlive-core-0
fmtutil.cnf
+.keep_app-text_texlive-core-0
texmf.cnf
updmap.cfg
+++ /dev/null
-Europe/Berlin
-# This file was automatically generated by the /lib64/udev/write_net_rules
+# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x109a (e1000e)
-SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e4:64", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e6:3b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x8086:0x109a (e1000e)
-SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e4:65", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e6:3a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# your choices are:
#
# apache
-# aolserver
# lighttpd
# cherokee
+# nginx
+# gatling
#
# you can override this setting by using the -s switch to webapp-config
vhost_perms_installdir="0755"
+# Allow specifying absolute path names using the -d option?
+allow_absolute="no"
+
# ========================================================================
# END OF USER-EDITABLE SETTINGS
+++ /dev/null
-# this is an example warnquota.conf
-#
-; ; and # type comments are allowed
-# and even blank lines
-
-# values can be quoted:
-MAIL_CMD = "/usr/my/sendmail/instead/sendmail -t"
-FROM = "bas@localhost"
-# but they don't have to be:
-SUBJECT = Hey, user, clean up your account!
-CC_TO = "sysadm@localhost"
-# If you set this variable CC will be used only when user has less than
-# specified grace time left (examples of possible times: 5 seconds, 1 minute,
-# 12 hours, 5 days)
-# CC_BEFORE = 2 days
-SUPPORT = "support@myhost.com"
-PHONE = "(123) 456-1111 or (222) 333-4444"
-# Text in the beginning of the mail (if not specified, default text is used)
-# This way text can be split to more lines
-# Line breaks are done by '|' character
-# The expressions %i, %h, %d, and %% are substituted for user/group name,
-# host name, domain name, and '%' respectively. For backward compatibility
-# %s behaves as %i but is deprecated.
-MESSAGE = Hello user %i, I've noticed you use too much space\
- on my disk in %h.%d.|Delete your files on the following filesystems:|
-# Text in the end of the mail (if not specified, default text using SUPPORT and PHONE
-# is created)
-SIGNATURE = See you!| Your admin of %h|
-# Following text is used for mails about group exceeding quotas
-GROUP_MESSAGE = Hello, a group '%i' you're member of use too much space at %h.|\
-I chose you to do the cleanup.|Delete group files on the following filesystems:|
-# Text in the end of the mail to the group (if not specified, default text using SUPPORT
-# and PHONE is created).
-GROUP_SIGNATURE = See you!| Your admin|
-#
-#If you are running warnquota on a mail server, and don't want bounces
-#because clients cannot receive mail setting this to "any" will cause
-#warnquota to not send them mail for all devices. If you set this to the
-#device name (for example /dev/hdb1) then they will not be sent mail if they
-#are overquota on that device only, and will be sent mail for all other
-#devices.
-#MAILDEV =
-#
-#Here you can set a charset for emails sent by warnquota (e.g. UTF-8)
-#CHARSET =
-# If you are using LDAP mail lookups.
-# host, port, tls, binddn, and bindpw are straight forward.
-# LDAP_BASEDN is your search base dn
-# LDAP_SEARCH_ATTRIBUTE is the attr for the value you are looking for
-# LDAP_MAIL_ATTRIBUTE is the attribute you want used for the mail address
-# LDAP_DEFAULT_MAIL_DOMAIN is the default domain
-# if the attribute isn't found
-# if binddn and bindpw are blank or left out, an anonymous bind is used
-#
-# LDAP_MAIL = false # or false if you don't want to use it
-# If you have at least LDAP 2.3 installed, you can use LDAP_URI
-# LDAP_URI = ldaps://my.server:389
-# Otherwise you can specify LDAP_HOST and LDAP_PORT
-# LDAP_HOST = ldap
-# LDAP_PORT = 389
-# LDAP_BINDDN = uid=ReadOnlyUser,o=YourOrg
-# LDAP_BINDPW = YourReadOnlyUserPassword
-# LDAP_BASEDN = YourSearchBase
-# LDAP_SEARCH_ATTRIBUTE = uid
-# LDAP_MAIL_ATTRIBUTE = mailLocalAddress
-# LDAP_DEFAULT_MAIL_DOMAIN = YourDefaultMailDomain.com
-#
-# end of example warnquota.conf file
-#
<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
<public publicId="-//OMF//DTD Scrollkeeper OMF Variant V1.0//EN" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
<system systemId="http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
- <system systemId="http://glade.gnome.org/glade-2.0.dtd" uri="/usr/share/xml/libglade/glade-2.0.dtd"/>
<delegatePublic publicIdStartString="-//OASIS//ENTITIES DocBook XML" catalog="file:///etc/xml/docbook"/>
<delegatePublic publicIdStartString="-//OASIS//DTD DocBook XML" catalog="file:///etc/xml/docbook"/>
<delegateSystem systemIdStartString="http://www.oasis-open.org/docbook/" catalog="file:///etc/xml/docbook"/>
<delegatePublic publicIdStartString="ISO 8879:1986" catalog="file:///etc/xml/docbook"/>
<delegateSystem systemIdStartString="http://docbook.sourceforge.net/release/xsl/" catalog="file:///etc/xml/docbook"/>
<delegateURI uriStartString="http://docbook.sourceforge.net/release/xsl/" catalog="file:///etc/xml/docbook"/>
+ <system systemId="http://glade.gnome.org/glade-2.0.dtd" uri="/usr/share/xml/libglade/glade-2.0.dtd"/>
</catalog>
<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
<rewriteSystem systemIdStartString="http://docbook.sourceforge.net/release/xsl/current" rewritePrefix="file:///usr/share/sgml/docbook/xsl-stylesheets"/>
<rewriteURI uriStartString="http://docbook.sourceforge.net/release/xsl/current" rewritePrefix="file:///usr/share/sgml/docbook/xsl-stylesheets"/>
- <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbpoolx.mod"/>
- <public publicId="-//OASIS//DTD DocBook XML V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/docbookx.dtd"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbcentx.mod"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbnotnx.mod"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbgenent.mod"/>
- <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbhierx.mod"/>
- <public publicId="-//OASIS//DTD XML Exchange Table Model 19990315//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/soextblx.dtd"/>
- <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/calstblx.dtd"/>
- <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
- <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD XML Exchange Table Model 19990315//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/soextblx.dtd"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
<public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsa.ent"/>
<public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsb.ent"/>
<public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsc.ent"/>
<public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/calstblx.dtd"/>
<rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.1.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.1.2"/>
<rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.1.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.1.2"/>
- <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbpoolx.mod"/>
- <public publicId="-//OASIS//DTD DocBook XML V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/docbookx.dtd"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbcentx.mod"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbnotnx.mod"/>
- <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbgenent.mod"/>
- <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbhierx.mod"/>
- <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/calstblx.dtd"/>
- <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
- <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
<public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbpoolx.mod"/>
<public publicId="-//OASIS//DTD DocBook XML V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/docbookx.dtd"/>
<public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbcentx.mod"/>
projects / config / helga / etc.git / commitdiff