# Home page is: http://smartmontools.sourceforge.net
-# $Id: smartd.conf 3651 2012-10-18 15:11:36Z samm2 $
+# $Id: smartd.conf 4047 2015-03-22 16:16:24Z chrfranke $
# smartd will re-read the configuration file if it receives a HUP
# signal
# and min/max temperatures.
#DEVICESCAN -I 194 -I 231 -I 9 -W 5
-# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
+# First ATA/SATA or SCSI/SAS disk. Monitor all attributes, enable
# automatic online data collection, automatic Attribute autosave, and
# start a short self-test every day between 2-3am, and a long self test
# Saturdays between 3-4am.
/dev/sda -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
/dev/sdb -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
/dev/sdc -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
-#/dev/sda -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
# Monitor SMART status, ATA Error Log, Self-test log, and track
# changes in all attributes except for attribute 194
-#/dev/hdb -H -l error -l selftest -t -I 194
+#/dev/sdb -H -l error -l selftest -t -I 194
# Monitor all attributes except normalized Temperature (usually 194),
# but track Temperature changes >= 4 Celsius, report Temperatures
# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
# Send mail on SMART failures or when Temperature is >= 55 Celsius.
-#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
# ATA Translation (SAT) layer is between the OS and the device then
# A very silent check. Only report SMART health status if it fails
# But send an email in this case
-#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+#/dev/sdc -H -C 0 -U 0 -m admin@example.com
# First two SCSI disks. This will monitor everything that smartd can
# monitor. Start extended self-tests Wednesdays between 6-7pm and
# All but -d, -m and -M Directives are only implemented for ATA devices
#
# If the test string DEVICESCAN is the first uncommented text
-# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# then smartd will scan for devices.
# DEVICESCAN may be followed by any desired Directives.
--- /dev/null
+# Sample configuration file for smartd. See man smartd.conf.
+
+# Home page is: http://smartmontools.sourceforge.net
+
+# $Id: smartd.conf 3128 2010-07-27 13:08:31Z chrfranke $
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices. DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found. Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+#DEVICESCAN
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
+/dev/sda -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+/dev/sdb -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+#/dev/sda -a -m frank@brehm-online.com -M daily -M test -s (S/../.././01|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/hdb -H -l error -l selftest -t -I 194
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check. Only report SMART health status if it fails
+# But send an email in this case
+#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks. This will monitor everything that smartd can
+# monitor. Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED. Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am.
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+# -T TYPE set the tolerance to one of: normal, permissive
+# -o VAL Enable/disable automatic offline tests (on/off)
+# -S VAL Enable/disable attribute autosave (on/off)
+# -n MODE No check. MODE is one of: never, sleep, standby, idle
+# -H Monitor SMART Health Status, report if failed
+# -l TYPE Monitor SMART log. Type is one of: error, selftest
+# -f Monitor for failure of any 'Usage' Attributes
+# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
+# -M TYPE Modify email warning behavior (see man page)
+# -s REGE Start self-test when type/date matches regular expression (see man page)
+# -p Report changes in 'Prefailure' Normalized Attributes
+# -u Report changes in 'Usage' Normalized Attributes
+# -t Equivalent to -p and -u Directives
+# -r ID Also report Raw values of Attribute ID with -p, -u or -t
+# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
+# -i ID Ignore Attribute ID for -f Directive
+# -I ID Ignore Attribute ID for -p, -u or -t Directive
+# -C ID Report if Current Pending Sector count non-zero
+# -U ID Report if Offline Uncorrectable count non-zero
+# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+# -v N,ST Modifies labeling of Attribute N (see man page)
+# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+# -P TYPE Drive-specific presets: use, ignore, show, showall
+# # Comment: text after a hash sign is ignored
+# \ Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# DEVICESCAN may be followed by any desired Directives.
projects / config / bruni / etc.git / commitdiff